| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60104-1987 | 架空導線用鋁鎂硅合金導線 | Aluminium-magnesium-silicon alloy wire for overhead line conductors. |
| IEC 60114 Corrigendum 1-1959 | 熱處理型鋁鎂硅系鋁合金母線材料的建議 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| IEC 60114-1959 | 熱處理型鋁鎂硅系鋁合金母線材料的建議 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| IEC 60329-1985 | 用于電子和電信設備的晶粒取向硅鐵合金帶繞切割磁芯 | Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment |
| IEC 60404-8-3-2005 | 磁性材料.第8-3部分:單項材料規范.以半加工狀態交貨的冷軋電工非合金和合金鋼片及鋼帶 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| IEC 60614-2-7-1995 | 電氣裝置用導管規范 第2部分:導管的特殊規范 第7節:無螺紋鋁合金剛性導管 | Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| IEC 61035-2-4-1995 | 電氣裝置用導管配件規范 第2部分:特殊要求 第4節:鋁合金導管配件 | Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| IEC 61190-1-3-2007 | 電子組件用連接材料.第1-3部分:電子焊接用電子級釬焊合金及有焊劑和無焊劑的固體焊料用要求 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
| IEC 61755-3-5-2006 | 纖維光學連接器的光接口.第3-5部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61755-3-6-2006 | 纖維光學連接器光接口.第3-6部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱形8 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61788-3-2006 | 超導性.第3部分:臨界電流測量.銀和/或銀合金鎧裝的鉍-2212和鉍-2223氧化物超導體的臨界直流電流 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| IEC 62004-2007 | 架空導線用耐熱鋁合金導線 | Thermal resistant aluminium alloy wire for overhead line conductor |
| IEC/PAS 62483-2006 | 測量錫和錫合金表面須晶生長的試驗方法 | Test method for measuring whisker growth on tin and tin alloy surface finishes |
| IEC/TR2 61394-1997 | 架空線路 鋁、鋁合金及鋼心導線用脂的特性 | Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel bare conductors |
| ISO 10042 Technical Corrigendum 1-2006 | 焊接.鋁和鋁合金的弧焊接頭.缺陷質量分級.技術勘誤1 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 10042-2005 | 焊接.鋁和鋁合金的弧焊接頭.缺陷質量分級 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| ISO 10049-1992 | 鋁合金鑄件 目視法評定針孔 | Aluminium alloy castings; visual method for assessing the porosity |
| ISO 10074-1994 | 鋁和鋁合金硬質陽極氧化膜規范 | Specification for hard anodic oxidation coatings on aluminium and its alloys |
| ISO 10145-1-1993 | 焊有硬質合金螺旋刀頭的端銑刀 第1部分:直柄端銑刀尺寸 | End mills with brazed helical hardmetal tips; part 1: dimensions of end mills with parallel shank |
| ISO 10145-2-1993 | 焊有硬質合金螺旋刀頭的端銑刀 第2部分:7/24錐柄端銑刀尺寸 | End mills with brazed helical hardmetal tips; part 2: dimensions of end mills with 7/24 taper shank |
| ISO 10215-1992 | 陽極氧化鋁和鋁合金 陽極氧化膜圖像清晰度的目視測定 圖表比例尺法 | Anodized aluminium and aluminium alloys; visual determination of image clarity of anodic oxidation coatings; chart scale method |
| ISO 10216-1992 | 陽極氧化鋁和鋁合金 陽極氧化膜圖像清晰度儀器測定 儀器法 | Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method |
| ISO 10270 Technical Corrigendum 1-1997 | 金屬與合金的腐蝕 核動力反應堆用鋯合金的水腐蝕試驗 技術勘誤1 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors; Technical corrigendum 1 |
| ISO 10270-1995 | 金屬與合金的腐蝕 核動力反應堆用鋯合金的水腐蝕試驗 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors |
| ISO 10386-1994 | 硼鐵合金 規范和交貨條件 | Ferroboron - Specification and conditions of delivery |
| ISO 10461 AMD 1-2006 | 儲氣瓶.無縫鋁合金儲氣瓶.定期檢驗和試驗 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10461-2005 | 儲氣瓶.無縫鋁合金儲氣瓶.定期檢驗和試驗 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10546-1993 | 化學轉化膜 鋁及鋁合金上瓢洗和未瓢洗的鉻酸鹽轉化膜 | Chemical conversion coatings; rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| ISO 10713-1992 | 首飾 金合金覆蓋層 | Jewellery; gold alloy coatings |
| ISO 10911-1994 | 硬質合金直柄端銑刀 尺寸 | Solid hardmetal end mills with parallel shank - Dimensions |
| ISO 10993-15-2000 | 醫療器械的生物學評價 第15部分:金屬與合金降解產物的識別與定性 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys |
| ISO 11130-1999 | 金屬與合金的腐蝕 鹽溶液中的交替浸入試驗 | Corrosion of metals and alloys - Alternate immersion test in salt solution |
| ISO 11143-1999 | 牙科設備 汞齊合金分離器 | Dental equipment - Amalgam separators |
| ISO 1118-1978 | 鋁和鋁合金 鈦含量的測定 鉻變酸分光光度法 | Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method |
| ISO 11210-1995 | 鉑合金首飾中含鉑量的測定 氯鉑酸銨沉淀后重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate |
| ISO 11303-2002 | 金屬和合金的腐蝕.防大氣腐蝕方法的選擇指南 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion |
| ISO 11306-1998 | 金屬與合金的腐蝕 對海水表面的金屬和合金的暴露和評估準則 | Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water |
| ISO 11400-1992 | 鎳、鎳鐵和鎳合金 磷含量的測定 二氧磷釩鉬分子吸收光譜法 | Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method |
| ISO 11426-1997 | 金合金首飾中含金量的測定 灰吹法(火試金法) | Determination of gold in gold jewellery alloys - Cupellation method (fire assay) |
| ISO 11427 Technical Corrigendum 1-1994 | 銀合金首飾中含銀量的測定 溴化鉀容量法(電位滴定) 技術勘誤1 | Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide; Technical Corrigendum 1 |
| ISO 11427-1993 | 銀合金首飾中含銀量的測定 溴化鉀容量法(電位滴定) | Determination of silver in silver jewellery alloys; volumetric (potentiometric) method using potassium bromide |
| ISO 11433-1993 | 鎳合金 鈦含量的測定 二安替吡啉甲烷分子吸收光譜法 | Nickel alloys; determination of titanium content; diantipyrylmethane molecular absorption spectrometric method |
| ISO 11435-2005 | 鎳合金.鉬的測定.感應耦合等離子體原子發射光譜法 | Nickel alloys - Determination of molybdenum - Inductively coupled plasma atomic emission spectrometric method |
| ISO 11436-1993 | 鎳和鎳合金 硼總含量的測定 姜黃分子吸收光譜法 | Nickel and nickel alloys; determination of total boron content; curcumin molecular absorption spectrometric method |
| ISO 11437-1-1994 | 鎳合金 用電熱原子吸收光譜法對痕量元素含量測定 第1部分:一般要求和試樣的溶解 | Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution |
| ISO 11437-2-1994 | 鎳合金 用電熱原子吸收光譜法對痕量元素含量測定 第2部分:鉛含量的測定 | Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content |
| ISO 11463-1995 | 金屬與合金的腐蝕 斑蝕的評估 | Corrosion of metals and alloys - Evaluation of pitting corrosion |
| ISO 11474-1998 | 金屬和合金的腐蝕.人造氣氛的腐蝕試驗.間歇鹽霧下的室外加速試驗(瘡痂試驗) | Corrosion of metals and alloys - Corrosion test in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) |
| ISO 11489-1995 | 鉑合金首飾中含鉑量的測定 氯化汞還原重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride |
| ISO 11490-1995 | 鈀合金首飾中含鈀量的測定 丁二酮肟重量法 | Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime |
| ISO 115-2003 | 重熔用非鋁合金錠.分類及成分 | Unalloyed aluminium ingots for remelting - Classification and composition |
| ISO 1169-2006 | 鋅合金.鋁含量的測定.滴定法 | Zinc alloys - Determination of aluminium content - Titrimetric method |
| ISO 1178-1976 | 鎂合金 可溶性鋯的測定 茜素磺酸鹽光度法 | Magnesium alloys; Determination of soluble zirconium; Alizarin sulphonate photometric method |
| ISO 11782-1-1998 | 金屬和合金的腐蝕.腐蝕疲勞試驗.第1部分:循環失效試驗 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing |
| ISO 11782-2-1998 | 金屬和合金的腐蝕.腐蝕疲勞試驗.第2部分:預裂紋試樣裂紋擴展試驗 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens |
| ISO 11844-1-2006 | 金屬與合金的腐蝕.室內空氣低腐蝕性分類.第1部分:室內腐蝕作用的測定和評估 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity |
| ISO 11844-2-2005 | 金屬與合金的腐蝕.室內空氣低腐蝕性分類.第2部分:室內空氣中腐蝕作用的測定 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres |
| ISO 11844-3-2006 | 金屬與合金的腐蝕.室內空氣低腐蝕性分類.第3部分:室內腐蝕作用下環境參數的測定 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity |
| ISO 11845-1995 | 金屬與合金的腐蝕 腐蝕試驗的一般原則 | Corrosion of metals and alloys - General principles for corrosion testing |
| ISO 11846-1995 | 金屬與合金的腐蝕 溶解熱處理鋁合金的耐晶間腐蝕性的測定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| ISO 11873-2005 | 硬質合金.鈷金屬粉末中硫和碳含量的測定.紅外線探測法 | Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method |
| ISO 11881 Technical Corrigendum 1-1999 | 金屬與合金的腐蝕 鋁合金的剝落腐蝕試驗 技術勘誤1 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1 |
| ISO 11881-1999 | 金屬與合金的腐蝕 鋁合金的剝落腐蝕試驗 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys |
| ISO 1190-1-1982 | 銅和銅合金 牌號表示方法 第1部分:材料牌號 | Copper and copper alloys; Code of designation; Part 1 : Designation of materials |
| ISO 11973-1999 | 一般用途耐熱鑄鋼及合金 | Heat-resistance cast steels and alloys for general applications |
| ISO 12215-3-2002 | 小型船舶.船體結構和船材尺寸.第3部分:材料:鋼,鋁合金,木料及其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| ISO 12288-2000 | 航空航天 鎳合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in nickel alloy - Procurement specification |
| ISO 12290-2000 | 航空航天 鈦和鈦合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in titanium or titanium alloy - Procurement specification |
| ISO 12725-1997 | 鎳和鎳合金鑄件 | Nickel and nickel alloy castings |
| ISO 12732-2006 | 金屬和合金的腐蝕.利用雙環法進行電化學電動勢活化測量 | Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) |
| ISO 13583-1-2000 | 離心鑄造鋼及合金產品 第1部分:一般試驗和公差 | Centrifugally cast steel and alloy products - Part 1: General testing and tolerances |
| ISO 13583-2-2003 | 離心鑄造鋼及合金產品.第2部分:耐熱材料 | Centrifugally cast steel and alloy products - Part 2: Heat resistant materials |
| ISO 13680 Technical Corrigendum 2-2004 | 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2 |
| ISO 13680-2000 | 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| ISO 13756-1997 | 銀合金中含銀量的測定 氯化鈉或氯化鉀容量法(電位滴定) | Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride |
| ISO 13770-1997 | 鋁合金氣瓶 避免瓶頸和瓶肩裂紋的操作要求 | Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks |
| ISO 13897 Technical Corrigendum 1-2003 | 牙科學.汞齊合金膠囊.技術勘誤1 | Dentistry - Amalgam capsules; Technical Corrigendum 1 |
| ISO 13897-2003 | 牙科學.汞齊合金膠囊 | Dentistry - Amalgam capsules |
| ISO 13899-2-2005 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子體原子發射光譜法.第2部分:鈮含量測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content |
| ISO 13919-2-2001 | 焊接 電子束和激光束焊接接頭 缺陷質量等級指南 第2部分：鋁及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 14171-2002 | 焊料.非合金鋼和細粒鋼埋弧焊用焊絲和焊絲-焊劑混合物.分類 | Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| ISO 14172 Technical Corrigendum 1-2004 | 焊接消耗品.鎳和鎳合金的手工金屬弧焊接用涂覆電極.分類.技術勘誤1 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification; Technical Corrigendum 1 |
| ISO 14172 Technical Corrigendum 2-2005 | 焊接消耗品.鎳及鎳合金的手工金屬電弧焊接用涂敷焊條.分類.技術勘誤2 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification, Technical Corrigendum 2 |
| ISO 14172-2003 | 焊接消耗品.鎳及鎳合金的手工電弧焊接用涂敷焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification |
| ISO 14317-2006 | 硬質合金除外的燒結金屬材料.屈服壓力強度的測定 | Sintered metal materials excluding hardmetals - Determination of compressive yield strength |
| ISO 14341-2002 | 焊料.非合金鋼和細粒鋼金屬氣體保護焊用焊絲和溶敷金屬.分類 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| ISO 14737-2003 | 一般用途的非合金和低合金鑄鋼 | Cast non-alloy and low alloy steels for general applications |
| ISO 14788-2005 | 連續熱浸鍍鋅(5%)鋁合金涂層鋼薄板 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| ISO 14920-1999 | 熱噴涂 自熔合金的噴涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys |
| ISO 14993-2001 | 金屬及合金的腐蝕 循環暴露在鹽霧、干、濕條件下的加速試驗 | Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions |
| ISO 15156-2 Technical Corrigendum 1-2005 | 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳鋼和低合金鋼及鑄鐵的使用. | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1 |
| ISO 15156-2-2003 | 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用 | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| ISO 15156-3 Technical Corrigendum 1-2005 | 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第1部分:耐裂化CRAs(防腐蝕合金)和其他合金. | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1 |
| ISO 15156-3 Technical Corrigendum 2-2005 | 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第1部分:耐裂化CRAs(防腐蝕合金)和其他合金. | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2 |
| ISO 15156-3-2003 | 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金 | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 15201-2006 | 鋅和鋅合金.鑄造.規范 | Zinc and zinc alloys - Castings - Specifications |
| ISO 15324-2000 | 金屬和合金的腐蝕.滴落蒸發試驗的應力腐蝕開裂評價 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| ISO 15329-2006 | 金屬和合金的腐蝕.熱處理鋁合金的粒間腐蝕易感性評價的陽極試驗 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
| ISO 15349-2-1999 | 非合金鋼.低碳含量的測定.第2部分:感應爐(經預加熱)內燃燒后紅外吸收法 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| ISO 1554-1976 | 加工銅合金和鑄造銅合金 銅含量的測定 電解法 | Wrought and cast copper alloys; Determination of copper content; Electrolytic method |
| ISO 15546-2007 | 石油和天然氣工業.鋁合金鉆桿 | Petroleum and natural gas industries - Aluminium alloy drill pipe |
| ISO 15614-1 Technical Corrigendum 1-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.第1部分:鋼的電弧焊接和氣焊以及鎳和鎳合金的電弧焊接.技術勘 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys; Technical Corrigendum 1 |
| ISO 15614-1-2004 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第1部分:鋼的電弧焊和氣焊及鎳和鎳合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15614-2 Technical Corrigendum 1-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.第2部分:鋁及其合金的電弧焊接.技術勘誤1 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys; Technical Corrigendum 1 |
| ISO 15614-2-2005 | 金屬材料焊接程序的規范和鑒定.焊接過程試驗.第2部分:鋁和鋁合金電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys |
| ISO 15614-5-2004 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第5部分:鈦、鋯及其合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys |
| ISO 15614-6-2006 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第6部分:銅及其合金的電弧焊接和氣焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys |
| ISO 15792-1-2000 | 焊接耗材 試驗方法 第1部分:鋼、鎳和鎳合金全焊金屬試樣的試驗方法 | Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| ISO 16120-1-2001 | 拔絲用非合金鋼絲棒 第1部分：一般要求 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements |
| ISO 16120-2-2001 | 拔絲用非合金鋼絲棒 第2部分：一般用途鋼絲棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod |
| ISO 16120-3-2001 | 拔絲用非合金鋼絲棒 第3部分：未脫氧的和未脫氧代用的低碳鋼絲棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod |
| ISO 16120-4-2001 | 拔絲用非合金鋼絲棒 第4部分：特殊用途鋼絲棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications |
| ISO 16151-2005 | 金屬和合金的腐蝕.暴露于鹽酸噴霧、干燥和濕潤條件下加速周期試驗 | Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions |
| ISO 16220 AMD 1-2007 | 鎂和鎂合金.鎂合金鑄錠和鑄件.修改件1:附加合金 | Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Amendment 1: Additional alloys |
| ISO 16220-2005 | 鎂和鎂合金.鎂合金鑄錠和鑄件 | Magnesium and magnesium alloys - Magnesium alloy ingots and castings |
| ISO 16468-2005 | 熔模鑄件(鋼、鎳合金和鈷合金).一般技術要求 | Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements |
| ISO 16701-2003 | 金屬及合金的腐蝕.調節空氣中的腐蝕.暴露于間歇噴灑鹽溶液和潮濕循環受控環境下的加速腐蝕試驗 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 16784-1-2006 | 金屬與合金的腐蝕.工業冷卻水系統中的腐蝕和結污.第1部分:進行開放式循環冷卻水系統用腐蝕和結污控制添加劑 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems |
| ISO 16784-2-2006 | 金屬與合金的腐蝕.工業冷卻水系統中的腐蝕性和結污.第2部分:用實驗刻度試驗設備對冷卻水處理程序的性能的評 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
| ISO 17475 Technical Corrigendum 1-2006 | 金屬和合金的腐蝕.電化學試驗方法.靜電位和動電位偏振測量導則.技術勘誤1 | Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1 |
| ISO 17475-2005 | 金屬和合金的腐蝕.電化學試驗方法.靜電位和動電位偏振測量導則 | Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
| ISO 17615-2007 | 鋁和鋁合金.重熔用合金鑄錠.規范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| ISO 17632-2004 | 焊接消耗品.非合金鋼及細粒鋼氣體保護的和非氣體保護金屬弧焊用藥芯電極.分類 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 1783-1973 | 鎂合金 鋅的測定 容量法 | Magnesium alloys; Determination of zinc; Volumetric method |
| ISO 1784-1976 | 鋁合金 鋅含量的測定 EDTA滴定法 | Aluminium alloys; Determination of zinc; EDTA titrimetric method |
| ISO 17864-2005 | 金屬和合金的腐蝕性.靜電位控制下的臨界點蝕溫度測定 | Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control |
| ISO 1810-1976 | 銅合金 鎳含量(低含量)的測定 丁二酮肟分光光度法 | Copper alloys; Determination of nickel (low contents); Dimethylglyoxime spectrophotometric method |
| ISO 1811-1-1988 | 銅和銅合金 化學分析試樣的選擇和制備 第1部分:鑄造產品的取樣 | Copper and copper alloys; selection and preparation of samples for chemical analysis; part 1: sampling of cast unwrought products |
| ISO 1811-2-1988 | 銅和銅合金 化學分析試樣的選擇和制備 第2部分:加工產品及鑄件的取樣 | Copper and copper alloys; selection and preparation of samples for chemical analysis; part 2: sampling of wrought products and castings |
| ISO 1812-1976 | 銅合金 鐵含量的測定 1,10-菲羅啉分光光度法 | Copper alloys; Determination of iron content; 1,10- Phenanthroline spectrophotometric method |
| ISO 18273-2004 | 焊接消耗品.鋁和鋁合金焊接用焊絲電極、金屬絲和棒材.分類 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification |
| ISO 18274 Technical Corrigendum 1-2005 | 焊接消耗品.鎳和鎳合金熔焊用焊絲和條式電極、焊線和焊條.分類.技術勘誤1 | Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 1 |
| ISO 18274 Technical Corrigendum 2-2006 | 焊接耗材.鎳及鎳合金熔焊用絲狀和帶狀電極、焊絲和焊條.分類.技術勘誤2 | Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 2 |
| ISO 18274-2004 | 焊接消耗品.鎳和鎳合金電弧焊用焊絲和條式電極、金屬線和棒材.分類 | Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification |
| ISO 18595-2007 | 電阻焊接.鋁和鋁合金的點焊.可焊接性、焊接和測試 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
| ISO 196-1978 | 鍛銅和銅合金 殘余應力的檢測 硝酸亞汞試驗 | Wrought copper and copper alloys; Detection of residual stress; Mercury(I) nitrate test |
| ISO 197-1-1983 | 銅和銅合金 術語和定義 第1部分:材料 | Copper and copper alloys; Terms and definitions; Part 1 : Materials |
| ISO 197-2-1983 | 銅和銅合金 術語和定義 第2部分:未加工產品(精煉型材) | Copper and copper alloys; Terms and definitions; Part 2 : Unwrought products (Refinery shapes) |
| ISO 197-3-1983 | 銅和銅合金 術語和定義 第3部分:加工產品 | Copper and copper alloys; Terms and definitions; Part 3 : Wrought products |
| ISO 197-4-1983 | 銅和銅合金 術語和定義 第4部分:鑄件 | Copper and copper alloys; Terms and definitions; Part 4 : Castings |
| ISO 197-5-1980 | 銅和銅合金 術語和定義 第5部分:加工和處理方法 | Copper and copper alloys; Terms and definitions; Part 5 : Methods of processing and treatment |
| ISO 1975-1973 | 鎂和鎂合金 硅的測定 鉬藍光度法 | Magnesium and magnesium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex |
| ISO 1976-1975 | 鋅合金 銅含量的測定 電解法 | Zinc alloys; Determination of copper content; Electrolytic method |
| ISO 19959-2005 | 熔模鑄件表面狀況的外觀檢查.鋼、鎳合金和鈷合金 | Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys |
| ISO 19960-2005 | 特殊物理性能的鑄鋼及合金 | Cast steels and alloys with special physical properties |
| ISO 20081-2005 | 鋅和鋅合金.抽樣方法.規范 | Zinc and zinc alloys - Method of sampling - Specifications |
| ISO 20160-2006 | 外科植入物.金屬材料.α+ β鈦合金棒材的微觀結構的分類 | Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
| ISO 2063-2005 | 熱噴鍍.金屬涂層和其他無機覆層.鋅、鋁及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys |
| ISO 20703-2006 | 氣瓶.可再充裝的焊接鋁合金氣瓶.設計、結構和試驗 | Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing |
| ISO 2085-1976 | 鋁和鋁合金的陽極氧化 陽極氧化膜的連續性檢驗 硫酸銅試驗 | Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test |
| ISO 209-2007 | 鋁和鋁合金.化學成分 | Aluminium and aluminium alloys - Chemical composition |
| ISO 2092-1981 | 輕金屬及其合金 元素符號表示牌號的規則 | Light metals and their alloys; Code of designation based on chemical symbols |
| ISO 2106 AMD 1-1983 | 鋁和鋁合金的陽極氧化 陽極氧化膜單位面積質量(表面密度)的測定 重量法 修改1 | Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1 |
| ISO 2106-1982 | 鋁和鋁合金的陽極氧化 陽極氧化膜單位面積質量(表面密度)的測定 重量法 | Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method |
| ISO 2107-2007 | 鋁和鋁合金.鍛造制品.回火號 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| ISO 2128-1976 | 鋁和鋁合金的陽極氧化 陽極氧化膜厚度的測定 分光束顯微鏡無損測定法 | Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope |
| ISO 2135-1984 | 鋁和鋁合金的陽極氧化 用人工燈測定著色陽極氧化膜耐光性的加速耐候試驗 | Anodizing of aluminium and its alloys; Accelerated test of light fastness of coloured anodic oxide coatings using artificial light |
| ISO 2142-1981 | 加工鋁、鎂及其合金 力學性能試驗用樣品和試樣的選擇 | Wrought aluminium, magnesium and their alloys; selection of specimens and test pieces for mechanical testing |
| ISO 2143-1981 | 鋁和鋁合金的陽極氧化 封孔后的陽極氧化膜吸收能力損失的評估 酸處理后的染斑試驗 | Anodizing of aluminium and its alloys; Estimation of loss of absorptive power of anodic oxide coatings after sealing; Dye spot test with prior acid treatment |
| ISO 2179-1986 | 錫鎳合金電鍍層 規范和試驗方法 | Electroplated coatings of tin-nickel alloy; Specification and test methods |
| ISO 22033-2005 | 鎳合金.鈮的測定.感應耦合等離子體原子發射光譜法 | Nickel alloys - Determination of niobium - Inductively coupled plasma atomic emission spectrometric method |
| ISO 2232-1990 | 一般用途非合金鋼絲繩和粗直徑鋼絲繩用拉撥鋼絲 規范 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications |
| ISO 22825-2006 | 焊縫無損檢測.超聲波試驗.奧氏體剛和鎳合金焊縫試驗 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys |
| ISO 2297-1973 | 鋁和鋁合金的化學分析 鎂的絡合滴定法測定 | Chemical analysis of aluminium and its alloys; Complexometric determination of magnesium |
| ISO 23079-2005 | 鎂和鎂合金.回爐料.要求、分類和驗收 | Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance |
| ISO 2353-1972 | 鎂和鎂合金 含鋯、稀土、釷和銀的鎂合金中錳的測定 高碘酸鹽光度法 | Magnesium and its alloys; Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver; Periodate photometric method |
| ISO 2354-1976 | 鎂合金 不溶性鋯的測定 茜素磺酸鹽光度法 | Magnesium alloys; Determination of insoluble zirconium; Alizarin sulphonate photometric method |
| ISO 2355-1972 | 鎂和鎂合金的化學分析 稀土含量的測定 重量法 | Chemical analysis of magnesium and its alloys; Determination of rare earths; Gravimetric method |
| ISO 2376-1972 | 鋁和鋁合金的陽極氧化 絕緣性能的擊穿電勢檢查法 | Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential |
| ISO 2377-1972 | 鎂合金砂模鑄件 參比試棒 | Magnesium alloy sand castings; Reference test bar |
| ISO 2378-1972 | 鋁合金冷硬鑄件 參比試棒 | Aluminium alloy chill castings; Reference test bar |
| ISO 2379-1972 | 鋁合金砂模鑄件 參比試棒 | Aluminium alloy sand castings; Reference test bar |
| ISO 24034-2005 | 焊接耗材.鈦和鈦合金的熔焊用焊絲和焊條.分類 | Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification |
| ISO 242-1975 | 硬質合金焊接車刀片 | Carbide tips for brazing on turning tools |
| ISO 24234-2004 | 牙科學.牙科汞齊合金用汞及合金 | Dentistry - Mercury and alloys for dental amalgam |
| ISO 243-1975 | 硬質合金車刀 外圓車刀 | Turning tools with carbide tips; External tools |
| ISO 2543-1973 | 銅和銅合金 錳含量的測定 分光光度法 | Copper and copper alloys; Determination of manganese; Spectrophotometric method |
| ISO 2560-2002 | 焊料.非合金鋼和細粒鋼的手工金屬電弧焊接的涂敷焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 2566-1-1984 | 鋼 伸長值的換算 第1部分:碳素鋼和低合金鋼 | Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels |
| ISO 26202-2007 | 鎂和鎂合金.鑄件陽極用鎂合金 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| ISO 2624-1990 | 銅和銅合金 平均晶粒度的測定方法 | Copper and copper alloys; estimation of average grain size |
| ISO 2701-1977 | 一般用途非合金鋼絲繩用拉撥鋼絲 驗收條件 | Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance |
| ISO 2804-1996 | 線、棒或管材拉模 硬質合金燒結片 尺寸 | Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions |
| ISO 2931-1983 | 鋁和鋁合金的陽極氧化 用導納或阻抗測量法評定陽極氧化膜的封孔質量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance |
| ISO 3110-1975 | 銅合金 合金元素鋁含量的測定 容量法 | Copper alloys; Determination of aluminium as alloying element; Volumetric method |
| ISO 3111-1975 | 銅合金 合金元素錫含量的測定 容量法 | Copper alloys; Determination of tin as alloying element; Volumetric method |
| ISO 3112-1975 | 銅和銅合金 鉛含量的測定 萃取滴定法 | Copper and copper alloys; Determination of lead; Extracting titration method |
| ISO 3116-2007 | 鎂和鎂合金.鍛造的鎂合金 | Magnesium and magnesium alloys - Wrought magnesium alloys |
| ISO 3134-1-1985 | 輕金屬及其合金 術語和定義 第1部分:材料 三種語言版 | Light metals and their alloys; Terms and definitions; Part 1 : Materials Trilingual edition |
| ISO 3134-2-1985 | 輕金屬及其合金 術語和定義 第2部分:未加工產品 三種語言版 | Light metals and their alloys; Terms and definitions; Part 2 : Unwrought products Trilingual edition |
| ISO 3134-3-1985 | 輕金屬及其合金 術語和定義 第3部分:加工產品 三種語言版 | Light metals and their alloys; Terms and definitions; Part 3 : Wrought products Trilingual edition |
| ISO 3134-4-1985 | 輕金屬及其合金 術語和定義 第4部分:鑄件 三種語言版 | Light metals and their alloys; Terms and definitions; Part 4 : Castings Trilingual edition |
| ISO 3134-5-1981 | 輕金屬及其合金 術語和定義 第5部分:加工和處理方法 | Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment |
| ISO 3160-1 AMD 1-2000 | 表殼及其附件 金合金覆蓋層 第1部分:一般要求 修改1 | Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements; Amendment 1 |
| ISO 3160-1-1998 | 表殼及其附件 金合金覆蓋層 第1部分:一般要求 | Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements |
| ISO 3160-2-2003 | 表殼和附件.金合金殼.第2部分:光潔度、厚度、抗腐蝕性和粘附性測定 | Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion |
| ISO 3210-1983 | 鋁和鋁合金的陽極氧化 磷-鉻酸法評定陽極氧化膜的封孔質量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution |
| ISO 3211-1977 | 鋁和鋁合金的陽極氧化 陽極氧化膜抗變形破裂性的評定 | Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation |
| ISO 3220-1975 | 銅和銅合金 砷含量的測定 光度法 | Copper and copper alloys; Determination of arsenic; Photometric method |
| ISO 3255-1974 | 鎂和鎂合金 鋁含量的測定 鉻天青S光度法 | Magnesium and magnesium alloys; Determination of aluminium; Chromazurol S photometric method |
| ISO 3256-1977 | 鋁和鋁合金 鎂含量的測定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method |
| ISO 3312-1987 | 燒結金屬材料和硬質合金 彈性模量的測定 | Sintered metal materials and hardmetals; Determination of Young modulus |
| ISO 3326-1975 | 硬質合金 (磁化)矯頑(磁)力的測定 | Hardmetals; Determination of (the magnetization) coercivity |
| ISO 3327-1982 | 硬質合金 橫向斷裂強度的測定 | Hardmetals; Determination of transverse rupture strength |
| ISO 3364-1997 | 有圓柱形固定孔和圓角的可轉位硬質合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions |
| ISO 3365-1985 | 去毛邊無固定孔的可轉位硬質合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; Dimensions |
| ISO 3369-2006 | 致密燒結金屬材料與硬質合金密度測定方法 | Impermeable sintered metal materials and hardmetals - Determination of density |
| ISO 3419-1981 | 非合金鋼和合金鋼對焊管件 | Non-alloy and alloy steel butt-welding fittings |
| ISO 3613-2000 | 鋅、鎘、鋁鋅合金和鋅鋁合金的鉻酸鹽轉化膜 試驗方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods |
| ISO 3690-2000 | 焊接 碳鋼和低合金鋼手工焊熔敷金屬擴散氫的測定 | Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal |
| ISO 3713-1987 | 鐵合金 取樣和樣品制備 一般規則 | Ferroalloys; Sampling and preparation of samples; General rules |
| ISO 3738-1-1982 | 硬質合金 洛氏硬度試驗(A標尺) 第1部分:試驗方法 | Hardmetals; Rockwell hardness test (scale A); Part 1 : Test method |
| ISO 3738-2-1988 | 硬質合金 洛氏硬度試驗(A標尺) 第2部分:標準試塊的制備及檢定 | Hardmetals; Rockwell hardness test (scale A); part 2: preparation and calibration of standard test blocks |
| ISO 3750-2006 | 鋅合金.鎂含量的測定.火焰原子吸收光譜法 | Zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method |
| ISO 3815-1-2005 | 鋅和鋅合金.第1部分:用光發射光譜測定法分析固體樣品 | Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry |
| ISO 3815-2-2005 | 鋅和鋅合金.第2部分:用電感耦合等離子體光發射光譜測定法分析 | Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry |
| ISO 3823-1-1997 | 牙科旋轉器械 牙鉆 第1部分:不銹鋼牙鉆和硬質合金牙鉆 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs |
| ISO 3878-1983 | 硬質合金 維氏硬度試驗 | Hardmetals; Vickers hardness test |
| ISO 3907-1985 | 硬質合金 總碳量的測定 重量法 | Hardmetals; Determination of total carbon content; Gravimetric method |
| ISO 3908-1985 | 硬質合金 不溶性(游離)碳含量的測定 重量法 | Hardmetals; Determination of insoluble (free) carbon content; Gravimetric method |
| ISO 3909-1976 | 硬質合金 鈷含量的測定 電位滴定法 | Hardmetals; Determination of cobalt; Potentiometric method |
| ISO 3927-2001 | 金屬粉末,不包括硬質合金粉末 單軸向壓制時壓縮性(壓實性)的測定 | Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression |
| ISO 3978-1976 | 鋁和鋁合金 鉻含量的測定 萃取二苯卡巴肼分光光度法 | Aluminium and aluminium alloys; Determination of chromium; Spectrophotometric method using diphenylcarbazide, after extraction |
| ISO 3979-1977 | 鋁和鋁合金 鎳含量的測定 丁二酮肟分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Spectrophotometric method using dimethylglyoxime |
| ISO 3980-1977 | 鋁和鋁合金 銅含量的測定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of copper; Atomic absorption spectrophotometric method |
| ISO 3981-1977 | 鋁和鋁合金 鎳含量的測定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Atomic absorption spectrophotometric method |
| ISO 4058-1977 | 鎂和鎂合金 鎳含量的測定 丁二酮肟光度法 | Magnesium and its alloys; Determination of nickel; Photometric method using dimethylglyoxime |
| ISO 4139-1979 | 硅鐵合金 鋁含量的測定 火焰原子吸收光譜法 | Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method |
| ISO 4145-1986 | 符合ISO 7/1螺紋標準的非合金鋼配件 | Non-alloy steel fittings threaded to ISO 7/1 |
| ISO 4158-1978 | 硅鐵合金、硅錳鐵和硅鉻鐵 硅含量的測定 重量法 | Ferrosilicon, ferrosilicomanganese and ferrosilicochromium; Determination of silicon content; Gravimetric method |
| ISO 4192-1981 | 鋁和鋁合金 鉛含量的測定 火焰原子吸收光譜法 | Aluminium and aluminium alloys; Determination of lead content; Flame atomic absorption spectrometric method |
| ISO 4193-1981 | 鋁和鋁合金 鉻含量的測定 火焰原子吸收光譜法 | Aluminium and aluminium alloys; Determination of chromium content; Flame atomic absorption spectrometric method |
| ISO 4194-1981 | 鎂合金 鋅含量的測定 火焰原子吸收光譜法 | Magnesium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 4379-1993 | 滑動軸承.銅合金襯套 | Plain bearings; copper alloy bushes |
| ISO 4381-2000 | 滑動軸承 多層滑動軸承用鉛錫鑄造合金 | Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
| ISO 4382-1-1991 | 滑動軸承 銅合金 第1部分:單層和多層厚壁滑動軸承用鑄造合金 | Plain bearings; copper alloys; part 1: cast copper alloys for solid and multilayer thick-walled plain bearings |
| ISO 4382-2-1991 | 滑動軸承 銅合金 第2部分:單層滑動軸承用鍛造合金 | Plain bearings; copper alloys; part 2: wrought copper alloys for solid plain bearings |
| ISO 4384-1-2000 | 滑動軸承 軸承合金的硬度試驗 第1部分:復合材料 | Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials |
| ISO 4384-2-1982 | 滑動軸承 軸承合金的硬度試驗 第2部分:單層材料 | Plain bearings; Hardness testing of bearing metals; Part 2 : Solid materials |
| ISO 4489-1978 | 燒結硬質合金制品 取樣和試驗方法 | Sintered hardmetals; Sampling and testing |
| ISO 4492-1985 | 金屬粉末,不包括硬質合金粉末 與壓實與燒結有關的尺寸變化的測定 | Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering |
| ISO 4499-1978 | 硬質合金 顯微組織的金相檢驗 | Hardmetals; Metallographic determination of microstructure |
| ISO 4501-1978 | 硬質合金 鈦含量的測定 過氧化物光度法 | Hardmetals; Determination of titanium; Photometric peroxide method |
| ISO 4503-1978 | 硬質合金 用X射線熒光測定金屬元素的含量 熔化法 | Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method |
| ISO 4505-1978 | 硬質合金 孔隙率和游離碳的金相測定 | Hardmetals; Metallographic determination of porosity and uncombined carbon |
| ISO 4506-1979 | 硬質合金 壓縮試驗 | Hardmetals; Compression test |
| ISO 4521-1985 | 金屬覆蓋層 工程用銀和銀合金電鍍層 | Metallic coatings; Electrodeposited silver and silver alloy coatings for engineering purposes |
| ISO 4522-1-1985 | 金屬覆蓋層.銀和銀合金電鍍層的試驗方法.第1部分:鍍層厚度的測量 | Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 1: Determination of coating thickness |
| ISO 4522-2-1985 | 金屬覆蓋層.銀和銀合金電鍍層的試驗方法.第2部分:粘著力試驗 | Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 2: Adhesion tests |
| ISO 4522-3-1988 | 金屬覆蓋層 銀和銀合金電鍍層的試驗方法 第3部分:殘留鹽的測定 | Metallic coatings; test methods for electrodeposited silver and silver alloy coatings; part 3: determination of the presence of residual salts |
| ISO 4523-1985 | 金屬覆蓋層 工程用金和金合金電鍍層 | Metallic coatings; Electrodeposited gold and gold alloy coatings for engineering purposes |
| ISO 4524-1-1985 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第1部分:鍍層厚度的測量 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 1 : Determination of coating thickness |
| ISO 4524-2-2000 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第2部分:混合流動氣體(MFG)環境試驗 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests |
| ISO 4524-3-1985 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第3部分:孔隙率的電圖試驗 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 3 : Electrographic tests for porosity |
| ISO 4524-4-1985 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第4部分:金含量的測定 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 4 : Determination of gold content |
| ISO 4524-5-1985 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第5部分:附著力試驗 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 5 : Adhesion tests |
| ISO 4524-6-1988 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第6部分:殘留鹽的測定 | Metallic coatings; test methods for electrodeposited gold and gold alloy coatings; part 6: determination of the presence of residual salts |
| ISO 4527-2003 | 金屬覆層.自動催化(無電)的鎳磷合金覆層.規范和試驗方法 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods |
| ISO 4551-1987 | 鐵合金 取樣和篩分 | Ferroalloys; Sampling and sieve analysis |
| ISO 4552-1-1987 | 鐵合金 化學分析用樣品的取制樣 第1部分:鉻鐵、硅鉻鐵、硅鐵、硅錳鐵和錳鐵 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 1 : Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese |
| ISO 4552-2-1987 | 鐵合金 化學分析用樣品的取制樣 第2部分:鈦鐵、鉬鐵、鎢鐵、鉭鐵、鈮鐵和釩鐵 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium |
| ISO 4739-1985 | 加工銅和銅合金產品 力學性能試驗用試料和試樣的選擇和制備 | Wrought copper and copper alloy products; Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 4740-1985 | 銅和銅合金 鋅含量的測定 火焰原子吸收光譜法 | Copper and copper alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 4741-1984 | 銅和銅合金 磷含量的測定 鉬釩酸鹽光譜法 | Copper and copper alloys; Determination of phosphorus content; Molybdovanadate spectrometric method |
| ISO 4742-1984 | 銅合金 鎳含量的測定 重量法 | Copper alloys; Determination of nickel content; Gravimetric method |
| ISO 4743-1984 | 銅合金 鎳含量的測定 滴定法 | Copper alloys; Determination of nickel content; Titrimetric method |
| ISO 4744-1984 | 銅和銅合金 鉻含量的測定 火焰原子吸收光譜法 | Copper and copper alloys; Determination of chromium content; Flame atomic absorption spectrometric method |
| ISO 4748-1984 | 銅合金 鐵含量的測定 Na2EDTA滴定法 | Copper alloys; Determination of iron content; Na2EDTA titrimetric method |
| ISO 4749-1984 | 銅合金 鉛含量的測定 火焰原子吸收光譜法 | Copper alloys; Determination of lead content; Flame atomic absorption spectrometric method |
| ISO 4751-1984 | 銅和銅合金 錫含量的測定 光譜法 | Copper and copper alloys; Determination of tin content; Spectrometric method |
| ISO 4883-1978 | 硬質合金 用X射線熒光測定金屬元素的含量 溶液法 | Hardmetals; Determination of contents of metallic elements by X-ray fluorescence; Solution method |
| ISO 4884-1978 | 硬質合金 用燒結試件進行粉末的取樣和試驗 | Hardmetals; Sampling and testing of powders using sintered test pieces |
| ISO 4948-1-1982 | 鋼 分類 第1部分:根據化學成分對非合金鋼和合金鋼的分類 | Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 4948-2-1981 | 鋼 分類 第2部分:根據主要質量等級和主要性能或應用特性對非合金鋼和合金鋼的分類 | Steels; Classification; Part 2 : Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 4999-2005 | 商用、拉制和建筑用連續熱鍍錫(鉛合金)冷軋?zhí)妓乇′摪? | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| ISO 504-1975 | 硬質合金車刀 名稱和標志 | Turning tools with carbide tips; Designation and marking |
| ISO 514-1975 | 硬質合金車刀 內圓車刀 | Turning tools with carbide tips; Internal tools |
| ISO 5193-1981 | 加工鋁和鋁合金 拉制圓棒材 尺寸和形位(直徑采用對稱正負偏差)偏差 | Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) |
| ISO 5194-1981 | 鋁和鋁合金 鋅含量的測定 火焰原子吸收光譜法 | Aluminium and aluminium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 5196-1-1980 | 鎂合金 釷的測定 第1部分:重量法 | Magnesium alloys; Determination of thorium; Part 1 : Gravimetric method |
| ISO 5196-2-1980 | 鎂合金 釷的測定 第2部分:滴定法 | Magnesium alloys; Determination of thorium; Part 2 : Titrimetric method |
| ISO 5226-1985 | 石油和天然氣工業用材料和設備.油井或天然氣井用鋁合金鉆管 | Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells |
| ISO 5396-1977 | 硬質合金的鐓鍛模 術語 兩種語言版 | Hardmetal heading dies; Terminology Bilingual edition |
| ISO 5407-1981 | 用于鐓鍛模的燒結硬質合金片 尺寸和公差 | As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances |
| ISO 5445-1980 | 硅鐵合金 規范和交貨條件 | Ferrosilicon; Specification and conditions of delivery |
| ISO 5468-2006 | 旋轉和旋轉沖擊式硬質合金圬工鉆.尺寸 | Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions |
| ISO 5817 Technical Corrigendum 1-2006 | 焊接.鋼、鎳、鈦及其合金的熔焊接縫(束焊除外).缺陷的質量等級.技術勘誤1 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 5817-2003 | 焊接.鋼、鎳、鈦及其合金熔焊接頭(束焊除外).缺陷的質量分級 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
| ISO 5832-11-1994 | 外科植入物 金屬材料 第11部分:鍛造鈦6鋁7鈮合金 | Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 5832-12-2007 | 外科植入物 金屬材料 第12部分:鍛造鈷鉻鉬合金 | Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ISO 5832-14-2007 | 外科植入物.金屬材料.第14部分:可鍛鈦15-鉬5-鋯3-鋁合金 | Implants for surgery - Metallic materials - Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| ISO 5832-3-1996 | 外科植入物 金屬材料 第3部分:鍛造鈦6鋁4釩合金 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 5832-4-1996 | 外科植入物 金屬材料 第4部分:鈷鉻鉬鑄造合金 | Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| ISO 5832-5-2005 | 外科植入物.金屬材料.第5部分:鍛造鈷鉻鎢鎳合金 | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 5832-6-1997 | 外科植入物 金屬材料 第6部分:鍛造鈷鎳鉻鉬合金 | Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 5832-7-1994 | 外科植入物 金屬材料 第7部分:鍛造冷成形鈷鉻鎳鉬合金 | Implants for surgery; metallic materials; part 7: forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 5832-8-1997 | 外科植入物 金屬材料 第8部分:鍛造鈷鎳鉻鉬鎢鐵合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 5857-1988 | 航空航天 強度等級1250 MPa帶有MJ螺紋的合金鋼凸頭螺栓 采購規范 | Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5956-1984 | 銅和銅合金 銻含量的測定 若丹明B光譜法 | Copper and copper alloys; Determination of antimony content; Rhodamine B spectrometric method |
| ISO 5959-1984 | 銅和銅合金 鉍含量的測定 二乙基二硫代氨基甲酸鹽光譜法 | Copper and copper alloys; Determination of bismuth content; Diethyldithiocarbamate spectrometric method |
| ISO 5960-1984 | 銅合金 鎘含量的測定 火焰原子吸收光譜法 | Copper alloys; Determination of cadmium content; Flame atomic absorption spectrometric method |
| ISO 6207-1992 | 鎳和鎳合金無縫管 | Seamless nickel and nickel alloy tube |
| ISO 6208-1992 | 鎳和鎳合金板、薄板和帶材 | Nickel and nickel alloy plate, sheet and strip |
| ISO 6279-2006 | 滑動軸承.固體軸承用鋁合金 | Plain bearings - Aluminium alloys for solid bearings |
| ISO 6305-2-2007 | 鐵道部件.交貨技術條件.第2部分:非合金碳鋼墊板 | Railway components - Technical delivery requirements - Part 2: Non-alloy carbon steel baseplates |
| ISO 636-2004 | 焊接消耗品.非合金鋼和細粒鋼的鎢惰性氣體焊用焊條、焊絲和溶敷金屬.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6361-1-1986 | 加工鋁和鋁合金薄板、帶、厚板 第1部分:交貨和驗收的技術條件 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery |
| ISO 6361-2-1990 | 加工鋁和鋁合金薄板、帶、厚板 第2部分:力學性能 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties |
| ISO 6361-3-1985 | 加工鋁和鋁合金薄板、帶、厚板 第3部分:帶材 尺寸和形狀公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on shape and dimensions (Previously referenced DIS 8219) |
| ISO 6361-4-1988 | 加工鋁和鋁合金薄板、帶、厚板 第4部分:薄板和厚板 尺寸和形狀公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions |
| ISO 6362-1-1986 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第1部分:驗收和交貨的技術條件 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery |
| ISO 6362-2-1990 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第2部分:力學性能 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical properties |
| ISO 6362-3-2001 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第3部分：擠壓矩形棒材 形狀和尺寸公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded rectangular bars; Tolerances on shape and dimensions |
| ISO 6362-4-1988 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第4部分:擠壓型材 尺寸和形狀公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded profiles; tolerances on shape and dimensions |
| ISO 6362-5-2001 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第5部分:擠壓圓形、正方形和六角形棒材 尺寸和形狀公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions |
| ISO 6363-1-1988 | 加工鋁和鋁合金冷拉棒/條材和管材 第1部分:驗收及交貨的技術條件 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery |
| ISO 6363-2-1993 | 加工鋁和鋁合金冷拉棒/條材和管材 第2部分:力學性能 | Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical properties |
| ISO 6363-4-1991 | 加工鋁和鋁合金冷拉棒/條材和管材 第4部分:拉制矩形棒材 尺寸和形狀公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular bars; tolerances on form and dimensions |
| ISO 6363-5-1992 | 加工鋁和鋁合金冷拉棒/條材和管材 第5部分:冷拉方形和六角形棒材 尺寸和形狀公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and hexagonal bars; tolerances on form and dimensions |
| ISO 6365-1-1988 | 加工鋁和鋁合金冷拉線材 第1部分:驗收及交貨的技術條件 | Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery |
| ISO 6372-1-1989 | 鎳和鎳合金 術語和定義 第1部分:材料 兩種語言版 | Nickel and nickel alloys; terms and definitions; part 1: materials |
| ISO 6372-2-1989 | 鎳和鎳合金 術語和定義 第2部分:精煉產品 兩種語言版 | Nickel and nickel alloys; terms and definitions; part 2: refinery products |
| ISO 6372-3-1989 | 鎳和鎳合金 術語和定義 第3部分:加工產品和鑄件 兩種語言版 | Nickel and nickel alloys; terms and definitions; part 3: wrought products and castings |
| ISO 6437-1984 | 銅合金 鉻含量的測定 滴定法 | Copper alloys; Determination of chromium content; Titrimetric method |
| ISO 6509-1981 | 金屬與合金的腐蝕 黃銅耐脫鋅性的測定 | Corrosion of metals and alloys; Determination of dezincification resistance of brass |
| ISO 6581-1980 | 鋁和鋁合金的陽極氧化 著色陽極氧化膜耐紫外光的測定 | Anodizing of aluminium and its alloys; Determination of the fastness to ultra-violet light of coloured anodic oxide coatings |
| ISO 6719-1986 | 陽極氧化鋁和鋁合金 用積分球儀法測量鋁表面的反射特性 | Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 6827-1981 | 鋁和鋁合金 鈦含量的測定 二安替吡啉甲烷光度法 | Aluminium and aluminium alloys; Determination of titanium content; Diantipyrylmethane photometric method |
| ISO 683-1-1987 | 熱處理鋼、合金鋼和易切鋼 第1部分:按照不同成形的黑鋼制件直接硬化的非合金鋼和低合金鍛鋼 | Heat-treatable steels, alloy steels and free-cutting steels; Part 1 : Direct-hardening unalloyed and low alloyed wrought steel in form of different black products |
| ISO 683-10-1987 | 熱處理鋼、合金鋼和易切鋼 第10部分:壓力加工滲氮鋼 | Heat-treatable steels, alloy steels and free-cutting steels; Part 10 : Wrought nitriding steels |
| ISO 683-11-1987 | 熱處理鋼、合金鋼和易切鋼 第11部分:壓力加工表面硬化鋼 | Heat-treatable steels, alloy steels and free-cutting steels; Part 11 : Wrought case-hardening steels |
| ISO 683-14-2004 | 熱處理鋼、合金鋼和易切鋼.第14部分:淬火回火彈簧用熱軋鋼 | Heat-treatable steels, alloy steels and free-cutting steels - Part 14: Hot-rolled steels for quenched and tempered springs |
| ISO 683-15-1992 | 熱處理鋼、合金鋼和易切鋼 第15部分:內燃機用閥門鋼 | Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines |
| ISO 683-17-1999 | 熱處理鋼、合金鋼和易切鋼 第17部分:滾球和滾柱軸承鋼 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels |
| ISO 683-18-1996 | 熱處理鋼、合金鋼和易切鋼 第18部分:非合金和低合金鋼光亮制品 | Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright products of unalloyed and low alloy steels |
| ISO 683-9-1988 | 熱處理鋼、合金鋼和易切削鋼.第9部分:鍛造易切削鋼 | Heat-treatable steels, alloy steels and free-cutting steels; part 9: wrought free-cutting steels |
| ISO 6957-1988 | 銅合金 抗應力腐蝕氨熏試驗 | Copper alloys; ammonia test for stress corrosion resistance |
| ISO 6978-2 Technical Corrigendum 2-2006 | 天然氣.汞的測定.第2部分:用金/鉑合金混汞法對汞的采樣.技術勘誤2 | Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy; Technical Corrigendum 2 |
| ISO 6978-2-2003 | 天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣 | Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy |
| ISO 6984-1990 | 礦山提升鋼絲繩用非合金鋼絲 規范 | Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
| ISO 6987-1998 | 有部分圓柱形固定孔和圓角的可轉位硬質合金刀片 尺寸 | Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions |
| ISO 7005-3-1988 | 金屬法蘭 第3部分:銅合金和復合法蘭 | Metallic flanges; part 3: copper alloy and composite flanges |
| ISO 7087-1984 | 鐵合金 評估質量偏差的實驗方法和檢驗取樣精度的方法 | Ferroalloys; Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling |
| ISO 7141-2005 | 道路車輛.輕合金輪.碰撞試驗 | Road vehicles - Light alloy wheels - Impact test |
| ISO 7266-1984 | 銅和銅合金 硫含量的測定 燃燒滴定法 | Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7271-1982 | 鋁和鋁合金 箔材和薄帶材 尺寸公差 | Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances |
| ISO 7273-1981 | 鍛鋁和鋁合金.擠壓圓型材.形狀和尺寸公差 | Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions |
| ISO 7274-1981 | 加工鋁和鋁合金 冷拉圓棒材 尺寸和形狀公差(直徑采用負公差) | Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter) |
| ISO 7347-1987 | 鐵合金 檢驗取樣和樣品制備偏差的試驗方法 | Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation |
| ISO 7373-1987 | 鐵合金 檢驗樣品縮分精度的試驗方法 | Ferroalloys; Experimental methods for checking the precision of sample division |
| ISO 7441-1984 | 金屬與合金的腐蝕 戶外暴露腐蝕試驗中雙金屬腐蝕的測定 | Corrosion of metals and alloys; Determination of bimetallic corrosion in outdoor exposure corrosion tests |
| ISO 7488-1991 | 牙科銀汞合金攪拌器 | Dental amalgamators |
| ISO 7524-1985 | 鎳、鎳鐵和鎳合金 碳含量的測定 感應電爐燃燒后紅外線吸收法 | Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion |
| ISO 7526-1985 | 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后紅外線吸收法 | Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion |
| ISO 7527-1985 | 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后碘量滴定法 | Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion |
| ISO 7528-1989 | 鎳合金 鐵含量的測定 重鉻酸鉀滴定法 | Nickel alloys; determination of iron content; titrimetric method with potassium dichromate |
| ISO 7529-1989 | 鎳合金 鉻含量的測定 硫酸鐵(II)銨電位滴定法 | Nickel alloys; determination of chromium content; potentiometric titration method with ammonium iron(II) sulfate |
| ISO 7530-1-1990 | 鎳合金 火焰原子吸收光譜法 第1部分:一般要求和試樣溶解 | Nickel alloys; flame atomic absorption spectrometric analysis; part 1: general requirements and sample dissolution |
| ISO 7530-2-1990 | 鎳合金 火焰原子吸收光譜法 第2部分:鈷含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 2: determination of cobalt content |
| ISO 7530-3-1990 | 鎳合金 火焰原子吸收光譜法 第3部分:鉻含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 3: determination of chromium content |
| ISO 7530-4-1990 | 鎳合金 火焰原子吸收光譜法 第4部分:銅含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 4: determination of copper content |
| ISO 7530-5-1990 | 鎳合金 火焰原子吸收光譜法 第5部分:鐵含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 5: determination of iron content |
| ISO 7530-6-1990 | 鎳合金 火焰原子吸收光譜法 第6部分:錳含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 6: determination of manganese content |
| ISO 7530-7-1992 | 鎳合金 火焰原子吸收光譜法 第7部分:鋁含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 7: determination of aluminium content |
| ISO 7530-8-1992 | 鎳合金 火焰原子吸收光譜法 第8部分:硅含量測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 8: determination of silicon content |
| ISO 7530-9-1993 | 鎳合金 火焰原子吸收光譜法 第9部分:釩含量的測定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 9: determination of vanadium content |
| ISO 7539-1-1987 | 金屬與合金的腐蝕 應力腐蝕試驗 第1部分:試驗程序的通用指南 | Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures |
| ISO 7539-2-1989 | 金屬與合金的腐蝕 應力腐蝕試驗 第2部分:彎梁試樣的制備和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens |
| ISO 7539-3-1989 | 金屬與合金的腐蝕 應力腐蝕試驗 第3部分:U型彎曲試樣的制備和使用 | Corrosion of metals and alloys; stress corrosion testing; part 3: preparation and use of U-bend specimens |
| ISO 7539-4-1989 | 金屬與合金的腐蝕 應力腐蝕試驗 第4部分:軸向載荷拉伸試樣的制備和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens |
| ISO 7539-5-1989 | 金屬與合金的腐蝕 應力腐蝕試驗 第5部分:C-環形試樣的制備和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens |
| ISO 7539-6-2003 | 金屬和合金的腐蝕.應力腐蝕試驗.第6部分:恒定負荷或恒定位移條件下試驗用預破裂試樣的制備 | Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement |
| ISO 7539-7-2005 | 金屬與合金的腐蝕.應力腐蝕試驗.第7部分:慢速率應力試驗方法 | Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing |
| ISO 7539-8-2000 | 金屬與合金的腐蝕 應力腐蝕試驗 第8部分:評估焊件試樣的制備和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments |
| ISO 7539-9-2003 | 金屬和合金的腐蝕.應力腐蝕試驗.第9部分:在提升荷載或提升位移下試驗用預裂紋試樣的制備和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
| ISO 7583-1986 | 鋁和鋁合金的陽極氧化 術語 三種語言版 | Anodizing of aluminium and its alloys; Vocabulary Trilingual edition |
| ISO 7587-1986 | 錫鉛合金電鍍層 規范和試驗方法 | Electroplated coatings of tin-lead alloys; Specification and test methods |
| ISO 7599-1983 | 鋁和鋁合金的陽極氧化 鋁的陽極氧化膜一般規范 | Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium |
| ISO 7627-1-1983 | 硬質合金 火焰原子吸收光譜法的化學分析 第1部分:一般要求 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 1 : General requirements |
| ISO 7627-2-1983 | 硬質合金 火焰原子吸收光譜法的化學分析 第2部分:鈣、鉀、鎂和鈉含量(0.001%～0.02%m/m)的測定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 2 : Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) |
| ISO 7627-3-1983 | 硬質合金 火焰原子吸收光譜法的化學分析 第3部分:鈷、鐵、錳和鎳含量(0.01%～0.5%m/m)的測定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 3 : Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-4-1983 | 硬質合金 火焰原子吸收光譜法的化學分析 第4部分:鉬、鈦和釩含量(0.01%～0.5%m/m)的測定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 4 : Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-5-1983 | 硬質合金 火焰原子吸收光譜法的化學分析 第5部分:鈷、鐵、錳、鉬、鎳、鈦和釩含量(0.5%～2%m/m)的測定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 5 : Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
| ISO 7627-6-1985 | 硬質合金 火焰原子吸收光譜法的化學分析 第6部分:鉻含量(0.0%～2%m/m)的測定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 6 : Determination of chromium in contents from 0,01 to 2 % (m/m) |
| ISO 7668-1986 | 陽極氧化鋁和鋁合金.20°、45°、60°或85°角的鏡面反射率和鏡面光澤的測量 | Anodized aluminium and aluminium alloys; measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85° |
| ISO 7689-1988 | 航空航天 強度等級1100 MPa、帶MJ螺紋的合金鋼螺栓 采購規范 | Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 7722-1985 | 重力鑄造、砂型鑄造、冷硬鑄造或由有關工藝生產的鋁合金鑄件 驗收和交貨的一般條件 | Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes; General conditions for inspection and delivery |
| ISO 7755-1-1984 | 硬質合金去毛刺銼 第1部分:一般規范 | Hardmetal burrs; Part 1 : General specifications |
| ISO 7755-10-1984 | 硬質合金去毛刺銼 第10部分:錐形圓頭銼(L型) | Hardmetal burrs; Part 10 : Conical round- (ball-) nose burrs (style L) |
| ISO 7755-11-1984 | 硬質合金去毛刺銼 第11部分:錐形尖頭銼(M型) | Hardmetal burrs; Part 11 : Conical pointed-nose burrs (style M) |
| ISO 7755-12-1984 | 硬質合金去毛刺銼 第12部分:倒錐形銼(N型) | Hardmetal burrs; Part 12 : Inverted cone burrs (style N) |
| ISO 7755-2-1984 | 硬質合金去毛刺銼 第2部分:圓柱形銼(A型) | Hardmetal burrs; Part 2 : Cylindrical burrs (style A) |
| ISO 7755-3-1984 | 硬質合金去毛刺銼 第3部分:圓柱形圓頭銼(C型) | Hardmetal burrs; Part 3 : Cylindrical round- (ball-) nose burrs (style C) |
| ISO 7755-4-1984 | 硬質合金去毛刺銼 第4部分:球形銼(D型) | Hardmetal burrs; Part 4 : Spherical burrs (style D) |
| ISO 7755-5-1984 | 硬質合金去毛刺銼 第5部分:橢圓形銼(E型) | Hardmetal burrs; Part 5: Oval burrs (style E) |
| ISO 7755-6-1984 | 硬質合金去毛刺銼 第6部分:弧形圓頭銼(F型) | Hardmetal burrs; Part 6 : Arch round- (ball-) nose burrs (style F) |
| ISO 7755-7-1984 | 硬質合金去毛刺銼 第7部分:弧形尖頭銼(G型) | Hardmetal burrs; Part 7: Arch pointed-nose burrs (style G) |
| ISO 7755-8-1984 | 硬質合金去毛刺銼 第8部分:火炬型銼(H型) | Hardmetal burrs; Part 8 : Flame burrs (style H) |
| ISO 7755-9-1984 | 硬質合金去毛刺銼 第9部分:60°和90°圓錐形銼(J和 K型) | Hardmetal burrs; Part 9 : 60 degrees and 90 degrees cone burrs (styles J and K) |
| ISO 7759-1983 | 鋁和鋁合金的陽極氧化 用遮光角度儀或角度儀測量鋁表面的反射特性 | Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer |
| ISO 7773-1983 | 鎂合金 圓棒材和管材 尺寸偏差 | Magnesium alloys; Round bars and tubes; Dimensional tolerances |
| ISO 7787-2-2000 | 牙科旋轉器械 切割刀具 第2部分:技工室用硬質合金刀具 | Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters |
| ISO 7787-3-1991 | 牙科旋轉器械 切割工具 第3部分:技工室研磨機用硬質合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 7787-4-2002 | 牙科用旋轉器械.切割刀具.第1部分:實驗室用小型硬質合金刀具 | Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters |
| ISO 7866-1999 | 氣瓶 可重復充裝的鋁合金無縫氣瓶 設計、結構和試驗 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing |
| ISO 7900-2006 | 欄柵用鋼絲和金屬絲制品.鋅和鋅合金包覆的刺鋼絲 | Steel wire and wire products for fences - Zinc- and zinc-alloy-coated steel barbed wire |
| ISO 791-1973 | 鎂合金 鋁含量的測定 8-羥基喹啉重量法 | Magnesium alloys; Determination of aluminium; 8-hydroxyquinoline gravimetric method |
| ISO 792-1973 | 鎂和鎂合金 鐵含量的測定 鄰菲啰啉光度法 | Magnesium and magnesium alloys; Determination of iron; Orthophenanthroline photometric method |
| ISO 793-1973 | 鋁和鋁合金 鐵含量的測定 鄰菲啰啉光度法 | Aluminium and aluminium alloys; Determination of iron; Orthophenanthroline photometric method |
| ISO 794-1976 | 鎂和鎂合金 銅含量的測定 草酰二酰肼光度法 | Magnesium and magnesium alloys; Determination of copper content; Oxalyldihydrazide photometric method |
| ISO 795-1976 | 鋁和鋁合金 銅含量的測定 草酰二酰肼光度法 | Aluminium and aluminium alloys; Determination of copper content; Oxalyldihydrazide photometric method |
| ISO 796-1973 | 鋁合金 銅含量的測定 電解法 | Aluminium alloys; Determination of copper; Electrolytic method |
| ISO 797-1973 | 鋁和鋁合金 硅含量的測定 重量法 | Aluminium and aluminium alloys; Determination of silicon; Gravimetric method |
| ISO 7989-2-2007 | 鋼絲和鋼絲制品.鋼絲的有色金屬涂層.第2部分:鋅或鋅合金涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating |
| ISO 8044-1999 | 金屬與合金的腐蝕 基本術語和定義 三種語言版 | Corrosion of metals and alloys - Basic terms and definitions |
| ISO 8050-1988 | 鎳鐵合金錠或塊 分析取樣 | Ferronickel ingots or pieces; sampling for analysis |
| ISO 8078-1984 | 航空航天工藝 鋁合金的陽極化處理 無著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating |
| ISO 8079-1984 | 航空航天工藝 鋁合金的陽極化處理 帶著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating |
| ISO 808-1973 | 鋁和鋁合金 硅含量的測定 鉬藍分光光度法 | Aluminium and aluminium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex |
| ISO 8080-1985 | 航空航天 鈦和鈦合金的陽極化處理 硫酸工藝規程 | Aerospace; Anodic treatment of titanium and titanium alloys; Sulfuric acid process |
| ISO 8081-1985 | 航空航天工藝 鋁合金的化學轉化涂鍍 一般用途 | Aerospace process; Chemical conversion coating for aluminium alloys; General purpose |
| ISO 809-1973 | 鎂和鎂合金 錳含量的測定 高碘酸鹽光度法(錳含量為0.01%～0.8%) | Magnesium and magnesium alloys; Determination of manganese; Periodate photometric method (Manganese content between 0,01 and 0,8 %) |
| ISO 810-1973 | 鎂和鎂合金 錳含量的測定 高碘酸鹽光度法(錳含量小于0.01%) | Magnesium and magnesium alloys; Determination of manganese; Periodate photometric method (Manganese content less than 0,01 %) |
| ISO 8251-1987 | 陽極氧化鋁和鋁合金 用摩擦輪磨耗試驗機測定陽極氧化膜磨性和耐磨系數 | Anodized aluminium and aluminium alloys; Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus |
| ISO 8252-1987 | 陽極氧化鋁和鋁合金 用噴砂摩擦試驗儀測定陽極氧化膜的平均耐磨系數 | Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus |
| ISO 8282-1994 | 牙科設備 汞及合金混合器和調和器 | Dental equipment - Mercury and alloy mixers and dispensers |
| ISO 8287-2000 | 鎂和鎂合金 純鎂 化學成分 | Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition |
| ISO 8407-1991 | 金屬與合金的腐蝕 腐蝕試樣中腐蝕生成物的清除 | Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens |
| ISO 8442-7-2000 | 與食品接觸的材料和制品 刀具和凹形餐具 第7部分:銀、其他貴金屬及其合金制餐刀的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
| ISO 8458-2-2002 | 機械彈簧用鋼絲.第2部分:鉛淬冷拔非合金鋼絲 | Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire |
| ISO 8565-1992 | 金屬與合金 大氣腐蝕試驗 野外試驗的一般要求 | Metals and alloys; atmospheric corrosion testing; general requirements for field tests |
| ISO 8591-1-1989 | 航空航天 鍛鋁和鋁合金 檢驗、試驗和供貨要求 第1部分:一般要求 | Aerospace; wrought aluminium and aluminium alloys; inspection, testing and supply requirements; part 1: general requirements |
| ISO 8644-2006 | 摩托車.輕質合金鋼輪.試驗方法 | Motorcycles - Light-alloy wheels - Test method |
| ISO 8645-1988 | 輕便摩托車 輕合金輪 試驗方法 | Mopeds; light-alloy wheels; test method |
| ISO 8654-1987 | 金合金顏色 定義、顏色范圍和標記 | Colours of gold alloys; Definition, range of colours and designation |
| ISO 883-1985 | 無固定孔的修圓角的可轉位硬質合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole; Dimensions |
| ISO 886-1973 | 鋁和鋁合金 錳含量的測定 光度法(錳含量為0.005～1.5%) | Aluminium and aluminium alloys; Determination of manganese; Photometric method (Manganese content between 0,005 and 1,5 %) |
| ISO 8954-1-1990 | 鐵合金 詞匯 第1部分:材料 三種語言版 | Ferroalloys; vocabulary; part 1: materials |
| ISO 8954-2-1990 | 鐵合金 詞匯 第2部分:取樣和樣品的制備 三種語言版 | Ferroalloys; vocabulary; part 2: sampling and sample preparation |
| ISO 8954-3-1990 | 鐵合金 詞匯 第3部分:篩分 三種語言版 | Ferroalloys; vocabulary; part 3: sieve analysis |
| ISO 8993-1989 | 陽極氧化鋁和鋁合金 點腐蝕法評定鋁及鋁合金陽極氧化膜 圖表法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; chart method |
| ISO 8994-1989 | 陽極氧化鋁和鋁合金 點腐蝕法評定鋁及鋁合金陽極氧化膜 網格法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; grid method |
| ISO 9152-1998 | 航空航天 強度等級為1100 MPa的鈦合金MJ螺紋螺栓 采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification |
| ISO 9154-1999 | 航空航天 由強度等級為1550 MPa的耐熱鎳基合金制成的帶MJ螺紋的螺栓 采購規范 | Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification |
| ISO 9202-1991 | 首飾 貴金屬合金純度 | Jewellery; fineness of precious metal alloys |
| ISO 9216-2002 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化六角帶槽(齒形頭)螺母.尺寸和質量 | Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9217-2002 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化帶埋頭孔的倒角墊圈.尺寸和質量 | Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9218-2002 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化平墊圈.尺寸和質量 | Aerospace - Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9219-2002 | 航空航天.滑輪用合金鋼和鍍鎘或鈦合金鋼、MoS<下標2>潤滑或耐腐蝕鋼和鈍化的緊公差柄、短螺紋薄六角頭螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9223-1992 | 金屬與合金的腐蝕 大氣腐蝕性 分類 | Corrosion of metals and alloys; corrosivity of atmospheres; classification |
| ISO 9224-1992 | 金屬與合金的腐蝕 大氣腐蝕性 腐蝕等級的指導值 | Corrosion of metals and alloys; corrosivity of atmospheres; guiding values for the corrosivity categories |
| ISO 9225-1992 | 金屬與合金的腐蝕 大氣腐蝕性 污染測量 | Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution |
| ISO 9226-1992 | 金屬與合金的腐蝕 大氣腐蝕性 評估腐蝕性用對標準樣品的腐蝕率的測定 | Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| ISO 9327-2-1999 | 壓力用途的鋼鍛件和軋制或鍛造的棒材 交貨技術條件 第2部分:具有規定的高溫度特性的非合金和合金鋼(鉬、鎘 | Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
| ISO 9328-2-2004 | 壓力用途的扁鋼制品.交貨技術條件.第2部分:規定了高溫性能的非合金和合金鋼 | Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 9328-4-2004 | 壓力用途扁鋼產品.交貨技術條件.第4部分:規定了低溫性能的鎳合金鋼 | Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties |
| ISO 9329-1-1989 | 壓力用途的無縫鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼 | Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties |
| ISO 9329-2-1997 | 壓力用途的無縫鋼管 交貨技術條件 第2部分:規定高溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ISO 9329-3-1997 | 壓力用途的無縫鋼管 交貨技術條件 第3部分:規定低溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 9330-1-1990 | 壓力用途的焊接鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼管 | Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties |
| ISO 9330-2-1997 | 壓力用途的焊接鋼管 交貨技術條件 第2部分:規定高溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-3-1997 | 壓力用途的焊接鋼管 交貨技術條件 第3部分:規定低溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9330-4-2000 | 壓力用途的焊接鋼管 交貨技術條件 第4部分:規定高溫性能的埋弧焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-5-2000 | 壓力用途的焊接鋼管 交貨技術條件 第5部分:規定低溫性能的埋弧焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9388-1992 | 鎳合金 磷含量測定 鉬藍分子吸收光譜法 | Nickel alloys; determination of phosphorus content; molybdenum blue molecular absorption spectrometric method |
| ISO 9400-1990 | 鎳基合金 抗晶間腐蝕性的測定 | Nickel-based alloys; determination of resistance to intergranular corrosion |
| ISO 9418-1998 | 航空航天 鋁或鋁合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification |
| ISO 9443-1991 | 熱處理和合金鋼 熱軋棒材和線材的表面質量等級 交貨技術條件 | Heat-treatable and alloy steels; surface quality classes for hot-rolled round bars and wire rods; technical delivery conditions |
| ISO 9453-2006 | 軟釬料合金.化學成分和形式 | Soft solder alloys - Chemical compositions and forms |
| ISO 9591-2004 | 鋁合金的腐蝕.抗應力腐蝕裂紋的測定 | Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking |
| ISO 9606-2-2004 | 焊工的認可試驗.熔焊.第2部分:鋁和鋁合金 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys |
| ISO 9606-3-1999 | 焊工的認可試驗 熔焊 第3部分:銅及銅合金 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys |
| ISO 9606-4-1999 | 焊工的認可試驗 熔焊 第4部分:鎳及鎳合金 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys |
| ISO 9606-5-2000 | 焊工的認可試驗 熔焊 第5部分:鈦及鈦合金、鋯和鋯合金 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
| ISO 9692-3-2000 | 焊接和相關工藝 接頭制備的建議 第3部分:鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9722-1992 | 鎳和鎳合金 加工產品的成分與形狀 | Nickel and nickel alloys; composition and forms of wrought products |
| ISO 9723-1992 | 鎳和鎳合金棒材 | Nickel and nickel alloy bars |
| ISO 9724-1992 | 鎳和鎳合金線材以及拔絲原料 | Nickel and nickel alloy wire and drawing stock |
| ISO 9725-1992 | 鎳和鎳合金鍛件 | Nickel and nickel alloy forgings |
| ISO 9915-1992 | 鋁合金鑄件 X射線照相試驗 | Aluminium alloy castings; radiography testing |
| ISO 9916-1991 | 鋁合金和鎂合金鑄件 液體滲透檢驗 | Aluminium alloy and magnesium alloy castings; liquid penetrant inspection |
| ISO 9950-1995 | 工業淬火油 冷卻特性的測定 鎳合金探測試驗法 | Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method |
| ISO 9975-1990 | 封閉纏繞礦用非合金鋼絲繩 規范 | Round non-alloy steel wires for locked coil mine winding ropes; specifications |
| ISO/TR 11434-1992 | 鎳合金 鈮和鉭的測定 離子交換法 | Nickel alloys; determination of niobium and tantalum; ion exchange method |
| ISO/TR 11728-1993 | 陽極氧化鋁和鋁合金 使用循環的人工燈和污染空氣測定著色陽極氧化膜色牢度的加速耐候試驗 | Anodized aluminium and aluminium alloys; accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas |
| ISO/TR 15349-1-1998 | 非合金鋼 低碳含量的測定 第1部分:電阻爐燃燒后的紅外線吸收法(脈沖間距) | Unalloyed steel - Determination of low carbon content - Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO/TR 15349-3-1998 | 非合金鋼 低碳含量的測定 第3部分:電阻爐(預熱的)燃燒后的紅外線吸收法 | Unalloyed steel - Determination of low carbon content - Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO/TR 17671-4-2002 | 焊接.金屬材料焊接的推薦.第4部分:鋁和鋁合金的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| ISO/TR 7242-1981 | 輕金屬和鋁合金的化學分析 實驗室間的試驗結果的統計分析 | Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials |
| ISO/TR 8125-1984 | 鋁和鋁合金的陽極氧化 著色陽極氧化膜的顏色和色差的測定 | Anodizing of aluminium and its alloys; Determination of colour and colour difference of coloured anodic coatings |
| ISO/TR 9721-1992 | 鎳和鎳合金 材料的牌號表示方法 | Nickel and nickel alloys; rules for material description based on chemical symbols |
| ISO/TS 13899-1-2004 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子原子發射光譜法.第1部分:鉬含量的測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content |
| ISO/TS 13899-3-2005 | 鋼.合金鋼中鉬、鈮和鎢含量的測定.感應耦合等離子體原子發射光譜法.第3部分:鎢含量的測定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content |
| ISO/TS 17576-2004 | 牙科學.汞齊合金的腐蝕試驗 | Dentistry - Corrosion tests for amalgam |
| 編號 | 中文名稱 | 英文名稱 |