| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10136-6-1993 | 玻璃和玻璃器皿 萃取溶液的分析 第6部分:用分子吸收光譜法測定氧化硼(III) | Glass and glassware; analysis of extract solutions; part 6: determination of boron(III) oxide by molecular absorption spectrometry |
| ISO 10153-1997 | 鋼 硼含量的測定 姜黃素分光光度法 | Steel - Determination of boron content - Curcumin spectrophotometric method |
| ISO 10386-1994 | 硼鐵合金 規范和交貨條件 | Ferroboron - Specification and conditions of delivery |
| ISO 11436-1993 | 鎳和鎳合金 硼總含量的測定 姜黃分子吸收光譜法 | Nickel and nickel alloys; determination of total boron content; curcumin molecular absorption spectrometric method |
| ISO 13900-1997 | 鋼 硼含量的測定 蒸餾后姜黃素光譜測定法 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation |
| ISO 14237-2000 | 表面化學分析 二次離子質譜 用均勻摻雜物質測定硅中硼的原子濃度 | Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials |
| ISO 16462-2004 | 鑲片或?qū)嵭牧⒎叫蔚痂傹X.尺寸、類型 | Cubic boron nitride inserts, tipped or solid - Dimensions, types |
| ISO 17560-2002 | 表面化學分析.再生離子質量的光譜測定.硅中硼的深仿形方法 | Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon |
| ISO 1802-1992 | 濃縮天然膠乳 硼酸含量的測定 | Natural rubber latex concentrate; determination of boric acid content |
| ISO 1914-1972 | 工業用硼酸 硼酸含量的測定 容量法 | Boric acid for industrial use; Determination of boric acid content; Volumetric method |
| ISO 1915-1972 | 工業用氧化硼 氧化硼含量的測定 容量法 | Boric oxide for industrial use; Determination of boric oxide content; Volumetric method |
| ISO 1916-1972 | 工業用四硼酸二鈉 氧化鈉和氧化硼含量及其灼燒失重測定 | Disodium tetraborates for industrial use; Determination of sodium oxide and boric oxide contents and loss on ignition |
| ISO 1917-1972 | 工業用水合過硼酸鈉 氧化鈉、氧化硼和有效氧含量的測定 容量法 | Hydrated sodium perborates for industrial use; determination of sodium oxide, boric oxide and available oxygen contents; volumetric methods |
| ISO 1918-1972 | 工業用硼酸、氧化硼、四硼酸二鈉和粗硼酸鈉 硫化物的測定 容量法 | Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use; Determination of sulphur compounds; Volumetric method |
| ISO 2051-1976 | 工業用氯化鉀 鉀含量的測定 四苯基硼酸鉀重量法 | Potassium chloride for industrial use; Determination of potassium content; Potassium tetraphenylborate gravimetric method |
| ISO 2052-1976 | 工業用氯化鉀 鉀含量的測定 四苯基硼酸鈉滴定法 | Potassium chloride for industrial use; Determination of potassium content; Sodium tetraphenylborate titrimetric method |
| ISO 21078-2-2006 | 耐火制品中氧化硼(III)的測定.第2部分:用酸提取法測定粘合物中的氧化硼(III) | Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components |
| ISO 2214-1972 | 工業用硼酸、氧化硼和四硼酸二鈉 錳含量的測定 甲醛肟光度法 | Boric acid, boric oxide and Disodium tetraborates for industrial use; Determination of manganese content; Formaldehyde oxime photometric method |
| ISO 2215-1972 | 工業用硼酸、氧化硼和四硼酸二鈉 銅含量的測定 二苯甲基二硫代氨基甲酸鋅光度法 | Boric acid, boric oxide and Disodium tetraborates for industrial use; Determination of copper content; Zinc dibenzyldithiocarbamate photometric method |
| ISO 2216-1972 | 工業用粗硼酸鈉 氧化鈉和氧化硼含量的測定 容量法 | Crude sodium borates for industrial use; Determination of sodium oxide and boric oxide contents; Volumetric method |
| ISO 2217-1975 | 工業用粗硼酸鈉 不溶于堿性介質的物質的測定和試驗溶液的配制 | Crude sodium borates for industrial use; Determination of matter insoluble in alkaline medium and preparation of test solutions |
| ISO 2218-1972 | 工業用粗硼酸鈉 900℃加熱后質量損失的測定 | Crude sodium borates for industrial use; Determination of loss in mass after heating at 900 degrees C |
| ISO 22917-2004 | 超磨料.金剛石或立方體氮化硼砂輪的極限偏差和跳動誤差 | Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
| ISO 2485-1973 | 工業用硫酸鉀 鉀含量的測定 四苯基硼酸鉀重量法 | Potassium sulphate for industrial use; Determination of potassium content; Gravimetric method as potassium tetraphenylborate |
| ISO 2760-1975 | 工業用粗硼酸鈉 鋁總含量的測定 滴定法 | Crude sodium borates for industrial use; Determination of total aluminium content; Titrimetric method |
| ISO 2761-1975 | 工業用粗硼酸鈉 鈦總含量的測定 光度法 | Crude sodium borates for industrial use; Determination of total titanium content; Photometric method |
| ISO 2865 Technical Corrigendum 1-1991 | 主要用于鋁生產的氧化鋁 硼含量的測定 姜黃素分光光度法 技術勘誤1 | Aluminium oxide primarily used for the production of aluminium; determination of boron content; curcumin spectrophotometric method; technical corrigendum 1 |
| ISO 2865-1973 | 主要用于鋁生產的氧化鋁 硼含量的測定 姜黃素分光光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method |
| ISO 3118-1976 | 工業用過硼酸鈉 用機械篩分法測定粒度分布 | Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving |
| ISO 3119-1976 | 工業用硼酸、氧化硼和四硼酸二鈉 鉻含量的測定 二苯基卡巴肼光度法 | Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chromium content; Diphenylcarbazide photometric method |
| ISO 3120-1976 | 工業用四硼酸二鈉和粗硼酸鈉 水含量的測定 重量法 | diSodium tetraborates and crude sodium borates for industrial use; Determination of water content; Gravimetric method |
| ISO 3121-1976 | 工業用硼酸、氧化硼和四硼酸二鈉 氯化物含量的測定 汞量法 | Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chloride content; Mercurimetric method |
| ISO 3122-1976 | 工業用硼酸、氧化硼、四硼酸二鈉、過硼酸鈉和粗硼酸鹽 鐵含量的測定 2,2'-聯吡啶光度法 | Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude borates for industrial use; Determination of iron content; 2,2'- Bipyridyl photometric method |
| ISO 3123-1976 | 工業用過硼酸鈉 溶解速率的測定 電導法 | Sodium perborates for industrial use; Determination of rate of solution; Conductivity method |
| ISO 3124-1976 | 工業用粗硼酸鈉 可溶于堿介質鐵含量的測定 2,2'-聯吡啶光度法 | Crude sodium borates for industrial use; Determination of iron soluble in alkaline medium; 2,2'- Bipyridyl photometric method |
| ISO 3125-1976 | 工業用粗硼酸鈉 可溶于堿介質鋁含量的測定 乙二胺四乙酸(EDTA)滴定法 | Crude sodium borates for industrial use; Determination of aluminium soluble in alkaline medium; EDTA titrimetric method |
| ISO 3424-1975 | 工業用過硼酸鈉 松密度的測定 | Sodium perborates for industrial use; Determination of bulk density |
| ISO 3585-1998 | 3.3硼硅酸鹽玻璃 性能 | Borosilicate glass 3.3 - Properties |
| ISO 3621-1994 | 攝影 沖洗用化學品 十水合四硼酸鈉規范 | Photography - Processing chemicals - Specifications for sodium tetraborate decahydrate |
| ISO 3628-1994 | 攝影 沖洗用化學品 粒狀硼酸規范 | Photography; processing chemicals; specifications for boric acid, granular |
| ISO 4803-1978 | 實驗室玻璃器皿 硼硅酸鹽玻璃管 | Laboratory glassware; Borosilicate glass tubing |
| ISO 5932-1980 | 工業用硼酸、氧化硼和四硼酸二鈉 鈷含量的測定 2-亞硝基-1萘酚光度法 | Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of cobalt content; 2- nitroso-1- naphthol photometric method |
| ISO 5933-1980 | 工業用硼酸、氧化硼、四硼酸二鈉和粗硼酸鈉 在硼酸、氧化硼和四硼酸二鈉中鎳總含量的測定以及粗硼酸鈉中可 | Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use; determination of total nickel content of boric acid, boric oxide and disodium tetraborates and the alkali-soluble nickel content of crude sodium borates; furil alpha-dioxime photometric method |
| ISO 5934-1980 | 工業用粗硼酸鈉 可溶于堿的銅和錳含量的測定 二苯基二硫代氨基甲酸鋅和甲醛肟光度法 | Crude sodium borates for industrial use; Determination of alkali-soluble copper and manganese contents; Zinc bis(dibenzyldithiocarbamate) and formaldehyde oxime photometric methods |
| ISO 5935-1984 | 工業用粗硼酸鈉 二氧化硅總含量及可溶于堿的二氧化硅含量測定 硅鉬酸鹽光譜法 | Crude sodium borates for industrial use; Determination of total and alkali-soluble silica contents; Molybdosilicate spectrometric method |
| ISO 5936-1980 | 工業用粗硼酸鈉 碳酸鹽含量的測定 重量法 | Crude sodium borates for industrial use; Determination of carbonate content; Gravimetric method |
| ISO 5937-1980 | 工業用過硼酸鈉 磨耗度的測定 | Sodium perborates for industrial use; Determination of degree of attrition |
| ISO 6104-2005 | 超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語 | Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature |
| ISO 6835-1981 | 表面活性劑 洗衣粉 總硼含量的測定 滴定法 | Surface active agents; Washing powders; Determination of total boron content; Titrimetric method |
| ISO 6849-1996 | 攝影 沖洗廢液 硼的測定 | Photography - Processing wastes - Determination of boron |
| ISO 6918-1984 | 工業用粗硼酸鈉 總的及可溶于堿液的鈣鎂含量的測定 火焰原子吸收光譜法 | Crude sodium borates for industrial use; Determination of total and alkali-soluble calcium and magnesium contents; Flame atomic absorption spectrometric method |
| ISO 6920-1984 | 工業用粗硼酸鈉 總的及可溶于堿液的鈣和鎂含量的測定 滴定法 | Crude sodium borates for industrial use; Determination of total and alkali-soluble calcium and magnesium contents; Titrimetric method |
| ISO 9390-1990 | 水質 硼酸鹽的測定 甲亞胺-H酸光度法 | Water quality; determination of borate; spectrometric method using azomethine-H |
| ISO/TR 11637-1997 | 淬火和回火硼處理工程用鋼 | Boron treated engineering steels for quenching and tempering |
| 編號 | 中文名稱 | 英文名稱 |