| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 29995-1980 | 航空航天.重熔鋼、鎳合金和鈷合金酸洗薄片的分離試驗 | Aerospace; segregation testing on etched slices of remelted steels, nickel and cobalt alloys |
| DIN 38406-16-1990 | 德國檢查水.廢水和污泥的標準法.陽離子(E組).用伏安測量法測定鋅、鎘、鉛、銅、鉈、鎳、鈷 | German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16) |
| DIN 38406-24-1993 | 德國檢驗水、廢水和污泥的標準方法.陽離子(E組).用原子吸收光譜法(AAS)測定鈷含量 | German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24) |
| DIN 50451-2-2003 | 半導體工藝材料測試.液體中痕量元素測定.第2部分:用等離子感應發射分光光度測定法測定氫氟酸中鈷(Co)、鉻(C | Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 2: Calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), Iron (Fe), nickel (Ni) and zinc (Zn) in hydrofluoric acid with plasma-induced emission spectroscopy |
| DIN 50451-3-2003 | 半導體工藝用材料測試.液體中痕量元素測定.第3部分:用電感耦合等離子體質譜法測定硝酸中鋁(AL)、鈷(Co)、銅 | Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS |
| DIN 53770-9-2007 | 顏料和稀釋劑.溶于鹽酸材料的確定.第9部分:鈷含量 | Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 9: Cobalt content |
| DIN 65021-1986 | 航空和航天.鋼、鎳和鈷合金薄板.板材和帶材.技術規范 | Aerospace; sheet, plate and strip of steel, nickel alloys and cobalt alloys; technical specification |
| DIN 65034-1992 | 航空航天.鋼、鎳合金以及鈷合金鑄件.技術規范.不適用于新設計 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
| DIN 65035-1993 | 航空航天.鋼、鎳和鈷合金坯料.鍛件和圓環.技術規范. | Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specification |
| DIN 65038-1-1989 | 航空航天.鋼、鎳和鈷合金棒材.第1部分:技術規范 | Aerospace; steel, nickel- and cobalt-alloy bars; technical specification |
| DIN 65038-2-1983 | 航空航天.航空用鋼、鎳合金和鈷合金棒材.技術規范.第2部分:取樣 | Aerospace; bars of steel, nickel alloys and cobalt alloys for aircraft; technical specification; sampling |
| DIN 65236-1988 | 航空航天.鋼絲.鎳和鈷合金絲材.技術規范 | Aerospace; steel, nickel- and cobalt-alloy wire; technical specification |
| DIN CEN/TS 15621-2007 | 牲畜飼料.壓力分解后用ICP-AES測定鈣、鈉、磷、鎂、鉀、硫、鐵、鋅、銅、錳、鈷和鉬 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES; German version CEN/TS 15621:2007 |
| DIN EN 10302-2008 | 鎳和鎳鈷合金的耐蠕變鋼 | Creep resisting steels, nickel and cobalt alloys; English version of DIN EN 10302:2008-06 |
| DIN EN 14941-2006 | 銅和銅合金.測定鈷含量.FAAS法 | Copper and copper alloys - Determination of cobalt content - FAAS method English version of DIN EN 14941:2006-09 |
| DIN EN 15510-2007 | 牲畜飼料.用ICP-AES測定鈣、鈉、磷、鎂、鉀、鐵、鋅、銅、錳、鈷、鉬、砷、鉛和鎘 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES; German version EN 15510:2007 |
| DIN EN 2103-1-1991 | 航空航天系列.鋼、鎳基以及鈷基合金重熔坯料和鑄件.技術規范.第1部分:一般要求 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 1: general requirements; german version EN 2103-1:1991 |
| DIN EN 2103-2-1991 | 航空航天系列.鋼、鎳基以及鈷基合金重熔坯料和鑄件.技術規范.第2部分:重熔坯料 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 2: remelting stock; german version EN 2103-2:1991 |
| DIN EN 2103-3-1991 | 航空航天系列.鋼、鎳基以及鈷基合金重熔坯料和鑄件.技術規范.第3部分:試制鑄件和批生產鑄件 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 3: pre-production and production castings; german version EN 2103-3:1991 |
| DIN EN 27520-1992 | 鎳鐵.鈷含量的測定.火焰原子吸收光譜測定法(ISO 7520-85) | Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991 |
| DIN EN 3959-2002 | 航空航天系列.鈷基合金CO-B41601(CoCr19Ni17Si8W4).銅焊用填充金屬.粉末和糊料; 德文版本 EN 3959:2001 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing, powder or paste; German version EN 3959:2001 |
| DIN EN ISO 6271-1-2005 | 透明液體.用鉑鈷標度評定顏色.第1部分:目測法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004); German version EN ISO 6271:2004 |
| DIN EN ISO 6271-2-2005 | 透明液體.用鉑鈷標度評定顏色.第2部分:分光光度法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004); German version EN ISO 6271-2:2004 |
| DIN ISO 11047-2003 | 土壤質量.土壤的王水萃取物中鎘、鉻、鈷、銅、鉛、錳、鎳和鋅的測定.火焰和電熱原子吸收光譜法 | Soil quality - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil - Flame and electrothermal atomic absorption spectrometric methods (ISO 11047:1998) |
| DIN ISO 3909-1994 | 硬質合金.鈷含量的測定.電位滴定法 | Hardmetals; determination of cobalt; potentiometric method; identical with ISO 3909:1976 |
| DIN ISO 5832-12-2009 | 外科植入物.金屬材料.第12部分:鍛造鈷-鉻-鉬合金 | Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:2007) |
| DIN ISO 5832-4-2000 | 外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金 | Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996) |
| DIN ISO 5832-5-2008 | 外科植入物.金屬材料.第5部分:鍛造鈷-鉻-鎢-鎳合金 | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:2005);English version of DIN ISO 5832-5:2008-04 |
| DIN ISO 5832-6-2001 | 外科植入物.金屬材料.第6部分:煅制鈷鎳鉻鉬合金 | Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997) |
| DIN ISO 5832-7-2001 | 外科植入物.金屬材料.第7部分:可鍛和冷加工的鈷鉻鎳鉬鐵合金 | Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994) |
| DIN ISO 5832-8-2000 | 外科植入物.金屬材料.第8部分:鍛制鈷鎳鉻鉬鎢鐵合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997) |
| DIN ISO 7627-3-1991 | 硬質合金.采用火焰原子吸收光譜法的化學分析.第3部分:含量為 0.01 % - 0.5 % (m/m)(平均克分子)的鈷、鐵、 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m); identical with ISO 7627-3:1983 |
| DIN ISO 7627-5-1991 | 硬質合金.采用火焰原子吸收光譜法的化學分析.第5部分:含量為 0.5 % - 2 % (m/m)(平均克分子)的鈷、鐵、錳、 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m); identical with ISO 7627-5:1983 |
| 編號 | 中文名稱 | 英文名稱 |