| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60383-1-1993 | 標稱電壓1000V以上的架空線路用絕緣子 第1部分:交流系統用陶瓷或玻璃絕緣子單元 定義、試驗方法和驗收準則 | Insulators for overhead lines with nominal voltage above 1000 V; part 1: ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria |
| IEC 60383-2-1993 | 標稱電壓1000V以上的架空線路用絕緣子 第2部分:交流系統用絕緣子串和絕緣子組 定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V; part 2: insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria |
| IEC 60591-1978 | 公稱電壓高于1000v的架空線路用陶瓷材料或玻璃絕緣子采用統計控制方法進行機械和機電試驗時的取樣規則和驗 | Sampling rules and acceptance criteria when applying statistical control methods for mechanical and electromechanical tests on insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V |
| IEC 60839-1-2-1987 | 報警系統 第1部分:一般要求 第2節:電源、試驗方法和性能準則 | Alarm systems. Part 1: General requirements. Section Two - Power units, test methods and performance criteria. |
| IEC 60960-1988 | 核電站安全參數顯示系統的功能設計準則 | Functional design criteria for a safety parameter display system for nuclear power stations |
| IEC 60988-1990 | 探測松動部件的聲音監測系統 性能、設計準則和操作程序 | Acoustic monitoring systems for loose parts detection; characteristics, design criteria and operational procedures |
| IEC 61031-1990 | 核電廠正常工況和預計運行事件期間的固定區域γ輻射劑量率監測設備的設計、安裝和應用準則 | Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences |
| IEC 61109 AMD 1-1995 | 標稱電壓大于1000V的交流架空線路用復合絕緣子 定義、試驗方法和驗收準則 修改1 | Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria; Amendment 1 |
| IEC 61109-1992 | 標稱電壓大于1000V的交流架空線路用復合絕緣子 定義、試驗方法和驗收準則 | Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V; definitions, test methods and acceptance criteria |
| IEC 61325-1995 | 標稱電壓1000V以上的架空線用絕緣子 直流系統用陶瓷或玻璃絕緣子單元 定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitons, test methods and acceptance criteria |
| IEC/TR 60638-1979 | 牽引用旋轉電機換向的評定和確定等級準則 | Criteria for assessing and coding of the commutation of rotating electrical machines for traction |
| ISO 10099-2001 | 氣壓傳動 缸筒 最終檢驗和驗收準則 | Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| ISO 11169-1993 | 林業機械 輪式專用機器 詞匯、性能試驗方法和制動系統準則 | Machinery for forestry; wheeled special machines; vocabulary, performance test methods and criteria for brake systems |
| ISO 11217-1993 | 航空航天 液壓系統液體污染物 取樣點位置和取樣準則 | Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling |
| ISO 11306-1998 | 金屬與合金的腐蝕 對海水表面的金屬和合金的暴露和評估準則 | Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water |
| ISO 12790-1-2001 | 輻射防護 放射生物分析行為準則 第1部分：一般原則 | Radiation protection - Performance criteria for radiobioassay - Part 1: General principles |
| ISO 129-1-2004 | 技術繪圖.尺寸和公差的表示.第1部分:一般準則 | Technical drawings - Indication of dimensions and tolerances - Part 1: General principles |
| ISO 14111-1997 | 天然氣 分析溯源性準則 | Natural gas - Guidelines for traceability in analysis |
| ISO 14146-2000 | 輻射防護 Χ輻射和γ輻射個人劑量計處理器定期評價準則和性能限值 | Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation |
| ISO 16049-1-2001 | 航空貨運設備 緊固帶 第1部分：設計準則及試驗方法 | Air cargo equipment - Restraint straps - Part 1: Design criteria and testing methods |
| ISO 16100-4-2006 | 工業自動化系統和集成.制造軟件互操作性的能力模型.第4部分:一致性試驗方法、準則和報告 | Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
| ISO 18413-2002 | 液壓傳動.零件和元件的清潔度.與污染物的收集、分析和數據報告相關的檢驗文件和準則 | Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| ISO 3601-3-2005 | 流體動力系統.O型密封圈.第3部分:質量驗收準則 | Fluid power systems - O-rings - Part 3: Quality acceptance criteria |
| ISO 7728-1985 | 一塊預制普通混凝土外墻構件和一塊混凝土樓板之間的典型水平接縫 性能、特征和分類準則 | Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor; Properties. characteristics and classification criteria |
| ISO 7729-1985 | 兩塊預制普通混凝土外墻構件之間的典型垂直接縫 性能、特征和分類準則 | Typical vertical joints between two prefabricated ordinary concrete external wall components; Properties, characteristics and classification criteria |
| ISO 7919-1-1996 | 非往復式機器的機械振動 旋轉軸的測量和評定準則 第1部分:總則 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines |
| ISO 7919-3 Technical Corrigendum 1-2007 | 非往復式機器的機械振動.旋轉軸的測量和評定準則.第3部分:連接工業機械.技術勘誤1 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines; Technical Corrigendum 1 |
| ISO 7919-3-1996 | 非往復式機器的機械振動 旋轉軸的測量和評定準則 第3部分:耦合工業機械 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines |
| ISO 7919-4-1996 | 非往復式機器的機械振動 旋轉軸的測量和評定準則 第4部分:燃?xì)廨啓C(jī)組 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets |
| ISO 8399-1-1998 | 航空航天 附件驅動和安裝法蘭(米制系列) 第1部分:設計準則 | Aerospace - Accessory drives and mounting flanges (Metric series) - Part 1: Design criteria |
| ISO 8821-1989 | 機械振動 平衡軸與配合件的鍵準則 | Mechanical vibration; balancing; shaft and fitment key convention |
| ISO 9110-1-1990 | 液壓傳動 測量技術 第1部分:通用測量準則 | Hydraulic fluid power; measurement techniques; part 1: general measurement principles |
| ISO/IEC 17020-1998 | 各類檢查機構運行的一般準則 | General criteria for the operation of various types of bodies performing inspection |
| ISO/IEC Guide 59-1994 | 標準化良好運行準則 | Code of good practice for standardization |
| ISO/TR 13763 Technical Corrigendum 1-1996 | 無縫氣瓶的安全和性能準則 技術勘誤1 | Safety and performance criteria for seamless gas cylinders; Technical Corrigendum 1 |
| ISO/TR 13763-1994 | 無縫氣瓶的安全和性能準則 | Safety and performance criteria for seamless gas cylinders |
| 編號 | 中文名稱 | 英文名稱 |