| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 5863-1-1984 | 過程控制系統模擬信號.第1部分:直流信號規范 | Analogue signals for process control systems - Specification for direct current signals |
| BS 5863-2-1980 | 過程控制系統模擬信號.第2部分:直流電壓信號規范 | Analogue signals for process control systems - Specification for direct voltage signals |
| BS 6739-2009 | 過程控制系統儀表的實施規范:安裝設計和實施 | Code of practice forinstrumentation in processcontrol systems: installationdesign and practice |
| BS 6912-20-1996 | 運土機械安全性.操作者控制系統 | Safety of earth-moving machinery - Specification for operator's controls |
| BS 7346-4-2003 | 煙和熱控制系統部件.利用穩態設計點火法的排煙和排熱通風系統用功能推薦方法和計算方法.實施規程 | Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practice |
| BS 7346-5-2005 | 煙和熱控制系統部件.利用時間相關設計點火法的排煙和排熱通風系統的功能推薦方法和計算方法.實施規程 | Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires - Code of practice |
| BS 7346-7-2006 | 煙和熱控制系統部件.有頂棚停車場煙和熱控制系統的功能建議和計算方法的實施規程 | Components for smoke and heat control systems - Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks |
| BS 7623-1993 | 工業處理控制系統用電氣和氣動模擬圖表記錄器.檢驗和常規試驗指南 | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Guidance for inspection and routine testing |
| BS 7986-2005 | 工業測量和控制系統用數據質量度量標準.規范 | Data quality metrics for industrial measurement and control systems - Specification |
| BS 8491-2008 | 用于煙和熱控制系統及特定的其它仍在繼續的火災安全系統部件的大直徑電力電纜著火完整性的評估方法 | Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems |
| BS DD CEN/TS 13149-3-2007 | 公共運輸.道路車輛行程安排和控制系統.第3部分:WorldFIP文電內容 | Public transport -Road vehicle scheduling and control systems - Part 3: WorldFIP message content |
| BS DD CEN/TS 13149-6-2005 | 公共運輸.道路車輛調度和控制系統.CAN文電內容 | Public transport — Road vehicle scheduling and control systems — Part 6: CAN message content |
| BS EN 12101-1-2005+A1-2006 | 煙熱控制系統.擋煙板規范 | Smoke and heat control systems - Specification for smoke barriers |
| BS EN 12101-10-2005 | 煙和熱控制系統.電源 | Smoke and heat control systems - Power supplies |
| BS EN 12101-2-2003 | 煙和熱控制系統.煙和熱的自然排放通風機規范 | Smoke and heat control systems - Specification for natural smoke and heat exhaust ventilators |
| BS EN 12101-3-2002 | 煙和熱控制系統.煙和熱的動力排放通風機規范 | Smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators |
| BS EN 12101-6-2005 | 煙和熱控制系統.壓差系統規范.工具箱 | Smoke and heat control systems - Specification for pressure differential systems - Kits |
| BS EN 13149-1-2004 | 公共交通.道路車輛調度和控制系統.車載數據傳輸?shù)腤ORLDFIP定義和應用規則 | Public transport - Road vehicle scheduling and control systems - WORLDFIP definition and application rules for onboard-data transmission |
| BS EN 13149-4-2004 | 公共運輸.道路車輛調度和控制系統.CANopen運輸車的一般應用規則 | Public transport - Road vehicle scheduling and control systems - General application rules for CANopen transmission buses |
| BS EN 13149-5-2004 | 公共運輸.道路車輛調度和控制系統.CANopen電纜敷設規范 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
| BS EN 13501-4-2007+A1-2009 | 建筑產品和建筑構件的火災分類.根據煙控制系統構件的耐火性試驗數據進行分類 | Fire classification of construction products and building elements - Classification using data from fire resistance tests on components of smoke control systems |
| BS EN 14097-2002 | 航天產品保證.不合格控制系統 | Space product assurance - Nonconformance control system |
| BS EN 1804-3-2006 | 地礦機械.液壓礦頂支撐物的安全要求.液壓控制系統 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems |
| BS EN 230-2005 | 燃油器用自動燃燒器控制系統 | Automatic burner control systems for oil burners |
| BS EN 298-2003 | 帶或不帶風機的燃氣爐及燃氣裝置用自動燃氣爐控制系統 | Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
| BS EN 30-1-4-2002 | 家庭烹調用燃氣灶具.安全性.帶有自動燃燒控制系統的一個或多個燃燒器的用具 | Domestic cooking appliances burning gas - Safety - Appliances having one or more burners with an automatic burner control system |
| BS EN 50094-1993 | MAC/包族的存取控制系統.EUROCRYPT | Access control system for the MAC/packet family: EUROCRYPT |
| BS EN 50133-1-1997 | 警報系統.安全用通路控制系統.系統要求 | Alarm systems - Access control systems for use in security applications - System requirements |
| BS EN 50133-2-1-2000 | 報警系統.安全用通路控制系統.元件一般要求 | Alarm systems - Access control systems for use in security applications - General requirements for components |
| BS EN 50133-7-1999 | 報警系統.安全用訪問控制系統.應用導則 | Alarm systems - Access control systems for use in security applications - Application guidelines |
| BS EN 50350-2004 | 蓄熱式家用房間電供暖用充電控制系統.性能測量方法 | Charging control systems for household electric room heating of the storage type - Methods for measuring performance |
| BS EN 60308-2005 | 水輪機.控制系統的試驗 | Hydraulic turbines - Testing of control systems |
| BS EN 60382-1993 | 過程控制系統用模擬氣動信號 | Analogue pneumatic signal for process control systems |
| BS EN 60546-1-1989 | 工業過程控制系統用模擬信號控制器.第1部分:性能評定方法 | Controllers with analogue signals for use in industrial-process control systems - Controllers with analogue signals for use in industrial-process control systems - Methods for evaluating performance |
| BS EN 60546-2-1989 | 工業過程控制系統用模似信號控制器.第2部分:檢驗和常規試驗指南 | Controllers with analogue signals for use in industrial-process control systems - Guidance for inspection and routine testing |
| BS EN 60730-2-5-2002 | 家用和類似用途的自動電氣控制裝置.自動電器燃燒器控制系統的特殊要求 | Automatic electrical controls for household and similar use - Particular requirements for automatic electrical burner control systems |
| BS EN 60770-1-1999 | 工業處理控制系統用發射機.性能評定方法 | Transmitters for use in industrial-process control systems - Methods for performance evaluation |
| BS EN 60770-2-2003 | 工業過程控制系統用傳感器.檢驗方法和常規試驗 | Transmitters for use in industrial-process control systems - Methods for inspection and routine testing |
| BS EN 60770-3-2006 | 工業過程控制系統用發射機.智能發射機的性能評估方法 | Transmitters for use in industrial-process control systems - Methods for performance evaluation of intelligent transmitters |
| BS EN 60873-1-2004 | 工業過程控制系統用電動和氣動模似圖表記錄儀.性能評定方法 | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Methods for performance evaluation |
| BS EN 60873-2-2004 | 工業過程控制系統用電動和氣動模似圖表記錄儀.檢查和常規試驗指南 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Guidance for inspection and routine testing |
| BS EN 60880-2009 | 核電站.對安全重要的儀器和控制系統.形成A類功能的基于計算機系統的軟件問題 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
| BS EN 61003-1-2004 | 工業過程控制系統.具有模似輸入和兩個或多個輸出狀態的儀表.性能評定方法 | Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Methods of evaluating performance |
| BS EN 61064-1993 | 汽輪機速度控制系統驗收試驗指南 | Guide to acceptance tests for steam turbine speed control systems |
| BS EN 61158-2-2004 | 測量和控制用數字數據通信.工業控制系統用現場總線.物理層規范和服務定義 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Physical layer specification and service definition |
| BS EN 61297-1996 | 工業過程控制系統.鑒定用自適應控制器分類 | Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation |
| BS EN 61362-1998 | 液壓渦輪控制系統規范指南 | Guide to specification of hydroturbine control systems |
| BS EN 61377-1-2006 | 鐵路設施.機車車輛.反向供電交流電動機及其控制系統的聯合測試 | Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system |
| BS EN 61377-3-2003 | 鐵路設施.鐵路車輛.由間接變流器饋電的交流電動機及其控制系統的聯合檢驗 | Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| BS EN 61514-2-2004 | 工業過程控制系統.氣動輸出智能閥門定位器性能評價的方法 | Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs |
| BS EN 61514-2002 | 工業過程控制系統.氣動輸出閥門定位器性能評價的方法 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
| BS EN 62061-2005 | 機械安全.與安全有關的電氣、電子和可編程序電子控制系統的功能安全 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| BS EN 62065-2002 | 船舶導航和無線電通信設備和系統.跟蹤控制系統.測試方法和要求的試驗結果操作和性能要求 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
| BS EN 62264-1-2008 | 企業控制系統集成.模型和術語 | Enterprise-control system integration -Part 1: Models and terminology |
| BS EN 62264-2-2008 | 企業控制系統集成.對象模型屬性 | Enterprise-control system integration -Part 2: Object model attributes |
| BS EN 62264-3-2007 | 企業控制系統集成.制造過程管理的活動模型 | Enterprise-controlsystem integration —Part 3: Activity models ofmanufacturing operations management |
| BS EN 62290-1-2006 | 鐵路設施.城市有軌運輸管理和命令/控制系統.第1部分:系統原則和基本原理 | Railway applications - Urban guided transport management andcommand/control systems - Part 1: System principles andfundamental concepts |
| BS EN 62337-2007 | 加工工業中電子設備、測量儀表和控制系統的交付使用.具體階段和里程碑 | Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones |
| BS EN ISO 11674-2001 | 船舶與海上技術.航向控制系統 | Ships and marine technology - Heading control systems |
| BS EN ISO 13628-6-2006 | 石油和天然氣工業.水下采油系統的設計和操作.水下生產控制系統 | Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems |
| BS EN ISO 13849-2-2008 | 機械安全.控制系統的安全相關部件.確認 | Safety of machinery - Safety-related parts of control systems - Validation |
| BS EN ISO 15005-2002 | 道路車輛.運輸信息和控制系統的人類工效學特性.對話管理原則和一致性程序 | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| BS EN ISO 15006-2004 | 道路車輛.交通信息和控制系統的人類工程學方面.車內聲音信號表示規范和聲順性規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation |
| BS EN ISO 15007-1-2002 | 道路車輛.與運輸信息和控制系統有關的司機目視行為的測量.定義和參數 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters |
| BS EN ISO 16201-2006 | 殘疾人用技術助力器.日用環境控制系統 | Technical aids for disabled persons - Environmental control systems for daily living |
| BS EN ISO 16484-2-2004 | 建筑物自動化和控制系統.硬件 | Building automation and control systems (BACS) - Hardware |
| BS EN ISO 16484-3-2005 | 建筑物自動化和控制系統.功能 | Building automation and control systems (BACS) - Functions |
| BS EN ISO 16484-5-2008 | 建筑自動化和控制系統.數據通信協議 | Building automation and control systems - Data communication protocol |
| BS EN ISO 17287-2003 | 道路車輛.運輸信息和控制系統的工效學.駕駛時適用性的評定規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving |
| BS EN ISO 18153-2003 | 體外診療裝置.生物樣品的定量測量.校準儀和控制系統指定酶的催化濃度的測量溯源性 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials |
| BS IEC 60671-2007 | 核電站.對安全性重要的儀器裝置和控制系統.監督測試 | Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing |
| BS IEC 60709-2004 | 核電站.重要的安全儀器和控制系統.隔離 | Nuclear power plants - Instrumentation and control systems important to safety - Separation |
| BS IEC 61225-2006 | 核電廠.安全重要儀表和控制系統.供電要求 | Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies |
| BS IEC 61500-2009 | 核電站.對安全重要的儀器和控制系統.系統執行A類功能的數據通信 | Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions |
| BS IEC 61504-2000 | 核電站.對安全致關重要的測試設備和控制系統.對整個工廠范圍的輻射監測 | Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring |
| BS IEC 62264-2-2005 | 企業控制系統一體化.對象模型屬性 | Enterprise-control system integration - Object model attributes |
| BS IEC 62342-2007 | 核電站.對安全性重要的儀器裝置和控制系統.老化管理 | Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing |
| BS IEC 62397-2007 | 核電站.對安全性重要的儀器裝置和控制系統.電阻溫度探測器 | Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors |
| BS ISO 12576-2-2008 | 絕熱產品.一致性控制系統.現場制品 | Thermal insulation products - Conformity control systems - In-situ products |
| BS ISO 13628-8-2002 | 石油和天然氣工業.海底采油系統的設計和操作.海底開采控制系統的遙控運送裝置的接口 | Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems |
| BS ISO 14827-1-2006 | 運輸信息和控制系統.運輸信息和控制系統中心區數據接口.消息定義要求 | Transport information and control systems - Data interfaces between centres for transport information and control systems - Message definition requirements |
| BS ISO 14827-2-2005 | 交通信息和控制系統.交通信息中心和控制系統間數據接口.DATEX-ASN | Transport information and control systems - Data interfaces between centres for transport information and control systems - DATEX-ASN |
| BS ISO 15078-1998 | 林業用機械.原木裝載機.駕駛員雙桿控制系統的操作位置和方法 | Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
| BS ISO 16329-2003 | 船舶和海上技術.高速船舶的航向控制系統 | Ships and marine technology - Heading control systems for high-speed craft |
| BS ISO 16673-2007 | 道路車輛.運輸信息和控制系統的人類工效學方面.阻塞法評定使用車內系統產生的視覺需求 | Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems |
| BS ISO 17386-2005 | 交通信息和控制系統.低速操作用機動輔助裝置.性能要求和試驗規程 | Transport information and control systems - Manoeuvring aids for low speed operation (MALSO) - Performance requirements and test procedures |
| BS ISO 17687-2007 | 運輸信息和控制系統(TICS).綜合運輸隊管理和商業貨運業務.危險材料/危險品運輸電子識別和監控用數據字典和 | Transport information and control systems (TICS) - General fleet management and commercial freight operations - Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation |
| BS ISO 21927-1-2008 | 煙和熱控制系統.擋煙隔板規范 | Smoke and heat control systems - Specification for smoke barriers |
| BS ISO 7176-14-2008 | 輪椅.電動輪椅和小型摩托車的動力和控制系統.要求和試驗方法 | Wheelchairs - Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| BS PAS 74-2008 | 因特網安全.兒童在線保護用訪問控制系統.規范 | Internet safety - Access control systems for the protection of children online - Specification |
| FD E09-027-1999 | 機械安全性.控制系統與安全相關的零部件.第100部分:EN 954-1-1996的應用指南 | Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996. |
| 編號 | 中文名稱 | 英文名稱 |