| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 15207-1-2000 | 連續式機械輸送設備.皮帶式輸送機用張緊皮帶輪.散裝物料皮帶式輸送機用張緊皮帶輪的主要尺寸 | Continuous mechanical handling equipment - Idlers for belt conveyors - Main dimensions of idlers for belt conveyors for bulk material |
| DIN 15207-2-1988 | 連續機械裝卸設備.單元貨物輸送機用托輥.托輥的主要尺寸 | Continuous mechanical handling equipment; idlers for belt conveyors for unit loads; main dimensions of idlers |
| DIN 15209-1984 | 連續機械裝卸設備.帶式輸送機、支撐托輥用緩沖環 | Continous mechanical handling equipment; belt conveyors, impact rings for carrying idlers |
| DIN 15210-1984 | 連續機械裝卸設備.帶式輸送機、回程皮帶支承托輥的圓盤 | Continous mechanical handling equipment; belt conveyors, discs for return idlers |
| DIN 15261-1-1986 | 散裝材料連續機械搬運設備.螺旋輸送機.匹配尺寸 | Continuous mechanical handling equipment for loose bulk materials; screw conveyors; mating dimensions |
| DIN 15261-2-1986 | 散裝材料用機械式連續輸送機.第2部分:螺旋輸送機.螺旋式螺旋葉片 | Continuous mechanical handling equipment for loose bulk materials; screw conveyors; helical screw blade |
| DIN 15262-1983 | 連續機械裝卸設備.松散散裝物用螺旋輸送機.設計原則 | Continuous mechanical handling equipment; Screw conveyors for loose bulk materials; Design principles |
| DIN 20097-1968 | 刨煤機和礦下鏈條輸送機的傳動裝置.傳動裝置用標志 | Gears for coal ploughs and underground chain-conveyors; signs for gears |
| DIN 21377-1994 | 采礦礦井輸送機用鋼欄桿 | Steel railings for shaft conveyances in mining |
| DIN 21636-2003 | 采礦空氣調節系統.帶式輸送機氣閥.尺寸、標識、要求和試驗 | Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing |
| DIN 22101-2002 | 連續輸送機.松散物料用皮帶輸送機.計算和參數選定的根據 | Continuous conveyors - Belt conveyors for loose bulk materials - Basis for calculation and dimensioning |
| DIN 22102-1-1991 | 松散物料用帶織物層的輸送機皮帶.尺寸、要求、標志 | Conveyor belts with textile plies for bulk goods; dimensions, specifications, marking |
| DIN 22102-3-1991 | 散裝貨物用織物疊層皮帶輸送機.第3部分:固定式連接 | Conveyor belts with textile plies for bulk goods; permanent joints |
| DIN 22107-1984 | 連續機械裝卸設備.散裝物皮帶輸送機用支承托輥.主要尺寸 | Continous mechanical handling equipment; idler sets for belt conveyors for loose bulk materials; principal dimensions |
| DIN 22111-2007 | 地下采煤用帶式輸送機.輕型結構 | Belt conveyors for underground coal mining - Light construction |
| DIN 22112-1-2000 | 地下采媒用皮帶輸送機.支承輥.第1部分:尺寸 | Belt conveyors for underground coal mining - Idlers - Part 1: Dimensions |
| DIN 22112-2-1996 | 地下采煤皮帶輸送機.托輥.第2部分:要求 | Belt conveyors for underground coalmining - Idlers - Part 2: Requirements |
| DIN 22112-3-1996 | 地下采煤皮帶輸送機.托輥.第3部分:試驗 | Belt conveyors for underground coalmining - Idlers - Part 3: Testing |
| DIN 22114-2001 | 井下采煤皮帶輸送機.重型支架 | Belt conveyors for underground coalmining - Heavy construction |
| DIN 22115-2003 | 地下煤礦開采用帶式輸送機.托輥的涂層.要求和檢驗 | Belt conveyors for underground coalmining - Coating on idlers - Requirements and testing |
| DIN 22116-2003 | 地下煤礦開采用帶式輸送機.DN為159的壓輥.尺寸、要求和標記 | Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking |
| DIN 22120-2005 | 無煙煤礦山的皮帶輸送機用彈性體刮板 | Elastomere scraper plates for belt conveyors in hard coal mines |
| DIN 22131-2-1988 | 升降機和皮帶輸送機用鋼索輸送帶.第2部分:標記 | Steelcord conveyor belts for hoisting and conveying; marking |
| DIN 22131-3-1988 | 升降機和皮帶輸送機用鋼索輸送帶.第3部分:檢驗 | Steelcord conveyor belts for hoisting and conveying; testing |
| DIN 22200-1994 | 連續機械搬運設備.板條式輸送機.計算原則 | Continuous mechanical handling equipment; apron conveyors; principles for calculation |
| DIN 22252-2001 | 采礦輸送機和回采設備圓鋼鏈 | Round steel link chains for conveyors and winning equipment in mining |
| DIN 22255-2001 | 礦山連續輸送機平扁節鏈 | Flat link chains for use in continuous conveyors in mining |
| DIN 22256-2002 | 鏈?zhǔn)捷斔蜋C(jī)和采煤設備用鏈輪組件.尺寸、要求、試驗 | Chain sprockets for chain conveyors and coal winning equipment - Dimensions, requirements, testing |
| DIN 22257-1990 | 鏈?zhǔn)焦伟遢斔蜋C(jī)刮板.外鏈帶.尺寸、要求、試驗 | Scraper bars for chain conveyors; outboard chain assembly; dimensions, requirements, testing |
| DIN 22259-2007 | 采礦業使用鏈?zhǔn)捷斔蜋C(jī)的刮板 | Flightbars for use in chain conveyors in mining |
| DIN 32601-3-1993 | 工業貨車.輸送機上裝貨用帶平臺超市載貨車.安全要求和檢驗 | Industrial trucks; supermarket trolleys, with platform for carrying on conveyers; safety requirements and testing |
| DIN 45635-45-1988 | 機器排放的空氣傳播噪聲的測量.第45部分:包洛面法.連續輸送機 | Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment |
| DIN 5699-1994 | 傳動帶輸送機用U型鏈節（U形鉤環） | Chain U-links (shackles) for conveyors |
| DIN 762-1-1992 | 連續輸送機用經過校正和檢驗的鏈環節距為5d的2級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d |
| DIN 762-2-1992 | 連續輸送機用經過校正和檢驗的鏈環節距為5d的3級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d |
| DIN 764-1-1992 | 連續輸送機用經過校正和檢驗的鏈環節距為3.5d的2級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d |
| DIN 764-2-1992 | 連續輸送機用經過校正和檢驗的鏈環節距為3.5d的3級圓鋼鏈索 | Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d |
| DIN 8153-1-1992 | 輸送機用平臺承重鏈.S型、D型 | Flat-top chains for conveyors; shape S, shape D |
| DIN 8153-2-1992 | 輸送機用平臺承重鏈.鏈輪的齒形.齒廓尺寸 | Flat-top chains for conveyors; tooth form for chain wheels; profile dimensions |
| DIN 8165-1-1992 | FV型整體軸承銷式輸送機鏈.單股和雙股鏈（不適用于新結構） | Solid bearing pin type FV conveyor chains; single-strand and double-strand chains (not to be used for new designs) |
| DIN 8165-2-1992 | FV型整體軸承銷式輸送機鏈.搭接板（不適用于新結構） | Solid bearing pin type FV conveyor chains; attachment plates (not to be used for new designs) |
| DIN 8165-3-1992 | FVT型整體軸承銷式厚板輸送機鏈（不適用于新結構） | Solid bearing pin type FVT conveyor chains with deep plates (not to be used for new designs) |
| DIN 8167-1-1986 | ISO-M型帶實心銷的輸送機鏈.單股鏈和雙股鏈 | ISO-type M conveyor chains with solid pins; single strand chains and double strand chains |
| DIN 8167-2-1986 | ISO-M型帶實心銷的輸送機鏈.緊固卡鏈.材料和連接尺寸 | ISO-type M conveyor chains with solid pins; attachments; material and connecting dimensions |
| DIN 8167-3-1986 | ISO-MT型帶實心銷和深層板的輸送機鏈 | ISO-type MT conveyor chains with solid pins and deep plates |
| DIN 8176-1980 | 輸送機鏈.輸送系統用套式輸送機鏈 | Conveyor chains; bush conveyor chains for haulage systems |
| DIN EN 13379-2002 | 面食加工設備.延輾機、脫皮機和切割機、粘著返回輸送機、粘著料斗.安全和衛生要求; 德文版本 EN 13379:2001 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements; German version EN 13379:2001 |
| DIN EN 13827-2004 | 襯鋼絲繩芯輸送機皮帶.鋼絲繩芯水平和垂直位移的測定 | Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords; German version EN 13827:2003 |
| DIN EN 28094-1994 | 鋼纜輸送機帶.纜索芯線涂層的粘合強度試驗 | Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984); German version EN 28094:1994 |
| DIN EN ISO 7622-1-1995 | 鋼絲芯線輸送機皮帶.縱向牽引試驗.第1部分:伸長率的測量 (ISO 7622-1:1984); 德文版本 EN ISO 7622-1:1995 | Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984); German version EN ISO 7622-1:1995 |
| DIN EN ISO 7622-2-1995 | 鋼絲芯線輸送機皮帶.縱向牽引試驗.第2部分:抗拉強度的測量 (ISO 7622-2:1984); 德文版本 EN ISO 7622-2:199 | Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984); German version EN ISO 7622-2:1995 |
| DIN EN ISO 7623-1997 | 鋼絲繩輸送機皮帶.鋼絲繩和芯層間粘合試驗.初始試驗和熱處理后試驗 | Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996); German version EN ISO 7623:1997 |
| 編號 | 中文名稱 | 英文名稱 |