| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| GB 3804-2004 | 3.6kV～40.5kV高壓交流負荷開關 | High-voltage alternating-current switches for rated voltage above 3.6kV and less than 40.5kV(IEC60265-1:1998 High-voltage switches - Part1: Switches for rated voltage above 1kV and less than 52kV, MOD) |
| GB/T 11604-1989 | 高壓電器設備無線電干擾測試方法 | Test methods for measuring radio interference from high voltage equipment |
| GB/T 11804-89 | 電工電子產品環境條件術語 | Terms of environmental conditions for electric and electronic products |
| GB 11920-1989 | 電站電氣部分集中控制裝置通用技術條件 | General specification of central control equipments for electrical parts in power stations and substations |
| GB 12350-90 | 小功率電動機的安全要求 | Safety requirements of small power motors |
| GB 12476.1-90 | 爆炸性粉塵環境用防爆電氣設備粉塵防爆電氣設備 | Electrical apparatus for explosive dust atmosphere, Dust ignition-proof apparatus |
| GB 12632-90 | 單晶硅太陽電池總規范 | General specification of single silicon solar cells |
| GB/T 12667-1990 | 同步電動機半導體勵磁裝置總技術條件 | General specification for excitation assembly with semiconductor for synchronous motor |
| GB/T 12668-1990 | 交流電動機半導體變頻調速裝置總技術條件 | General specificatin for speed control assembly with semiconductor adjustable frequency for A.C.motor |
| GB/T 4712-1996 | 自動化柴油發電機組分級要求 | Automatic diesel generating set，requirements of classification |
| GB/T 13232-1991 | 旋轉電機裝入式熱保護熱保護器通用規則 | Built-in thermal protection for rotating electrical machines--General rules for thermal protectors |
| GB/T 13498-1992 | 高壓直流輸電術語 | Terminology for high-voltage direct current transmission |
| GB/T 13500-1992 | 封閉式制冷壓縮機用三相異步電動機通用技術條件 | Three-phase asynchronous motors for hermetic refrigeration compressors--General specifications |
| GB/T 13957-1992 | 大型三相異步電動機基本系列技術條件 | Technical requirements for the fundamental series of 3-phase large asynchronous motors |
| GB 13960.10-1998 | 可移式電動工具的安全第二部分:單軸立式木銑的專用要求 | Safety of transportable motor-operated electric tools--Part 2:Particular requirements for single spindle vertical moulders |
| GB 14045-93 | 放電燈(管形熒光燈除外)用鎮流器的一般要求和安全要求 | Ballasts for discharge lamps (excluding tubular fluorescent lamps), general and safety requirements |
| GB/T 14315-1993 | 電力電纜導體用壓接型銅、鋁接線端子和連接管 | Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors |
| GB 14807-93 | 電動型材切割機的安全要求 | Safety requirements for cut-off machines |
| GB/T 790-1995 | 電動橋式起重機跨度和起升高度系列 | Overhead travelling crane--Span series and lifting height series |
| GB/T 2828.1-2003 | 計數抽樣檢驗程序第1部分:按接收質量限(AQL)檢索的逐批檢驗抽樣計劃 | Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection |
| 編號 | 中文名稱 | 英文名稱 |