| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10142-1996 | 鋁生產用碳素材料 煅燒焦 用實驗室振動磨測定粒度穩定性 | Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill |
| ISO 11277-1998 | 土壤質量 礦質土壤物質粒度分布的測定 篩分法和沉降法 | Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation |
| ISO 11286-2004 | 茶葉.用粒度分析法進行等級分類 | Tea - Classification of grades by particle size analysis |
| ISO 12194-1995 | 煙葉 煙葉粒度的測定 | Leaf tobacco - Determination of strip particle size |
| ISO 12984-2000 | 鋁生產用碳素材料 煅燒焦 粒度分布的測定 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution |
| ISO 13317-1-2001 | 用比重液體沉積法測定粒度分布 第1部分：一般原則和指南 | Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines |
| ISO 13317-2-2001 | 用比重液體沉積法測定粒度分布 第2部分：固定吸管法 | Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method |
| ISO 13317-3-2001 | 用比重液體沉積法測定粒度分布 第3部分：X射線比重法 | Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique |
| ISO 13318-1-2001 | 用離心液體沉積法測定粒度分布 第1部分：一般原則和指南 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines |
| ISO 13318-2-2007 | 用離心液相沉積法測定粒度分布.第2部分:光照離心法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method |
| ISO 13318-3-2004 | 用離心液體沉積法測定粒度分布.第3部分:離心X射線法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method |
| ISO 13319-2007 | 粒度分布測定.電感線圈法 | Determination of particle size distributions - Electrical sensing zone method |
| ISO 13320-1-1999 | 粒度分析 激光衍射法 第1部分:一般原則 | Particle size analysis - Laser diffraction methods - Part 1: General principles |
| ISO 13321-1996 | 粒度分析 相關光子光譜學 | Particle size analysis - Photon correlation spectroscopy |
| ISO 13322-1-2004 | 粒度分析.圖像分析法.第1部分:靜態圖像分析法 | Particle size analysis - Image analysis methods - Part 1: Static image analysis methods |
| ISO 13322-2-2006 | 粒度分析.圖像分析法.第2部分:動態圖像分析法 | Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods |
| ISO 13765-5-2004 | 耐熔灰漿.第5部分:粒度分布的測定(篩析法) | Refractory mortars - Part 5: Determination of grain size distribution (sieve analysis) |
| ISO 14250-2000 | 鋼 雙重粒度及分布的全相特性 | Steel - Metallographic characterization of duplex grain size and distributions |
| ISO 15825 Technical Corrigendum 1-2006 | 橡膠配合材料.炭黑.用盤式離心沉淀攝影法測定集料粒度分布.技術勘誤1 | Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry; Technical Corrigendum 1 |
| ISO 15825-2004 | 橡膠配合材料.炭黑.用盤式離心沉淀攝影儀測定集料粒度分布 | Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry |
| ISO 16014-1-2003 | 塑料.用粒度排除色譜法測定平均分子質量和分子質量分布.第1部分:一般原理 | Plastics - Determination of average molecular mass and molecular mass distribution using size-exclusion chromatography - Part 1: General principles |
| ISO 16014-2-2003 | 塑料.用粒度排除色譜法測定平均分子質量和分子質量分布.第2部分:通用校準法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method |
| ISO 16014-3-2003 | 塑料.用粒度排除色譜法測定高聚物的平均分子質量和分子質量分布.第3部分:低溫法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method |
| ISO 16014-4-2003 | 塑料.用粒度排除色譜法測定平均分子質量和分子質量分布.第4部分:高溫法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method |
| ISO 18395-2005 | 動植物脂肪和油.用高效粒度排除色譜法(HPSEC)測定單酰甘油、二酰甘油、三酰甘油和丙三醇 | Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
| ISO 1953-1994 | 硬煤 篩分粒度分析方法 | Hard coal - Size analysis by sieving |
| ISO 20203-2005 | 鋁生產中使用的碳素材料.煅燒焦炭.用X-射線衍射法測定煅燒石油焦的晶體粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| ISO 2030-1990 | 粒狀軟木 機械篩分法粒度分析 | Granulated cork; size analysis by mechanical sieving |
| ISO 22498-2005 | 塑料.氯乙烯均聚物和共聚物樹脂.采用機械篩分的粒度測定 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| ISO 2325-1986 | 焦炭 粒度分析(標稱最大粒度小于或等于20mm) | Coke; Size analysis (Nominal top size 20 mm or less) |
| ISO 2624-1990 | 銅和銅合金 平均晶粒度的測定方法 | Copper and copper alloys; estimation of average grain size |
| ISO 2926-2005 | 主要用于鋁生產的氧化鋁.45 μm至150 μm范圍內的粒度分析.電刻篩分法 | Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 μm to 150 μm - Method using electroformed sieves |
| ISO 2996-1974 | 工業用三聚磷酸鈉和焦磷酸鈉 用機械篩分法測定粒度分布 | Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Determination of particle size distribution by mechanical sieving |
| ISO 3118-1976 | 工業用過硼酸鈉 用機械篩分法測定粒度分布 | Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving |
| ISO 4150-1991 | 生咖啡 粒度分析 手工篩分法 | Green coffee; size analysis; manual sieving |
| ISO 4497-1983 | 金屬粉末 用干篩法測定粒度 | Metallic powders; Determination of particle size by dry sieving |
| ISO 4701-1999 | 鐵礦石 粒度篩分的測定 | Iron ores - Determination of size distribution by sieving |
| ISO 556-1980 | 焦炭(粒度大于20mm) 機械強度測定方法 | Coke (greater than 20 mm in size); Determination of mechanical strength |
| ISO 5915-1980 | 工業用六氟硅酸鈉 粒度分布的測定 篩分法 | Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method |
| ISO 6106-2005 | 磨料制品.超級磨料的磨料粒度的檢驗 | Abrasive products - Checking the grit size of superabrasives |
| ISO 6230-1989 | 錳礦石 粒度篩分 | Manganese ores; determination of size distribution by sieving |
| ISO 6344-1-1998 | 砂布 粒度分析 第1部分:粒度分布試驗 | Coated abrasives - Grain size analysis - Part 1: Grain size distribution test |
| ISO 6344-2-1998 | 砂布 粒度分析 第2部分:P12～P220微粒的粒度分布測定 | Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
| ISO 6344-3 Technical Corrigendum 1-1999 | 砂布 粒度分析 第3部分:P240～P2500粗磨粒度分布測定 技術勘誤1 | Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500; Technical Corrigendum 1 |
| ISO 6344-3-1998 | 砂布 粒度分析 第3部分:P240～P2500粗磨粒度分布測定 | Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
| ISO 643-2003 | 鋼.表面粒度的縮微照相測定 | Steels - Micrographic determination of the apparent grain size |
| ISO 728-1995 | 焦炭(標稱最大粒度大于20mm) 篩分粒度分析方法 | Coke (nominal top size greater than 20 mm) - Size analysis by sieving |
| ISO 8130-1-1992 | 粉末涂料 第1部分:用篩分法測定粒度分布 | Coating powders; part 1: determination of particle size distribution by sieving |
| ISO 8130-13-2001 | 粉末涂料 第13部分：采用激光衍射的粒度分析 | Coating powders - Part 13: Particle size analysis by laser diffraction |
| ISO 8486-1-1996 | 粘合磨料 粒度組成的檢定和標記 第1部分:粗磨粒從F4～F220 | Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 |
| ISO 8486-2-2007 | 粘合磨料.粒度分布的測定和標記.第2部分:F230到F2000微磨粉 | Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000 |
| ISO 8876 Technical Corrigendum 1-1991 | 熒石 粒度篩分 技術勘誤1 | Flourspar; determination of particle size distribution by sieving; technical corrigendum 1 |
| ISO 8876-1989 | 熒石 粒度篩分 | Fluorspar; determination of particle size distribution by sieving |
| ISO 9136-1-2004 | 磨料粒度.堆積密度的測定.第1部分:粗磨粒 | Abrasive grains - Determination of bulk density - Part 1: Macrogrits |
| ISO 9138-1993 | 磨粒粒度 取樣和裂解 | Abrasive grains; sampling and splitting |
| ISO 9276-1 Technical Corrigendum 1-2004 | 粒度分析結果的表示.第1部分:圖形表示.技術勘誤1 | Representation of results of particle size analysis - Part 1: Graphical representation; Technical Corrigendum 1 |
| ISO 9276-1-1998 | 粒度分析結果的表示 第1部分:圖形表示 | Representation of results of particle size analysis - Part 1: Graphical representation |
| ISO 9276-2-2001 | 粒度分析結果的表述.第2部分:由粒度分布計算平均粒徑/直徑和各次矩 | Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
| ISO 9276-4-2001 | 粒度分析結果的表述.第4部分:分級過程的表征 | Representation of results of particle size analysis - Part 4: Characterization of a classification process |
| ISO 9276-5-2005 | 粒度分析結果的表示.第5部分:使用對數正態概率分布的粒度分析相關計算方法 | Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution |
| ISO 9284-1992 | 磨料粒度 篩分試驗機 | Abrasive grains; test-sieving machines |
| ISO 9285-1997 | 磨料粒度 電熔氧化鋁的化學分析 | Abrasive grains and crude - Chemical analysis of fused aluminium oxide |
| ISO 9286-1997 | 磨料粒度 碳化硅的化學分析 | Abrasive grains and crude - Chemical analysis of silicon carbide |
| ISO/TS 13762-2001 | 粒度分析 小角度X射線濺射法 | Particle size analysis - Small angle X-ray scattering method |
| 編號 | 中文名稱 | 英文名稱 |