| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 10090-1998
| 內燃機閥門用鋼和合金
| Valve steels and alloys for internal combustion engines
|
| EN 1175-2-1998
| 工業貨車安全 電氣安全 第2部分：內燃機驅動貨車的一般要求
| Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
|
| EN 1175-3-1998
| 工業貨車安全 電氣安全 第3部分：內燃機驅動貨車電力傳輸系統的特殊要求
| Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
|
| EN 12601-2001
| 活塞式內燃機驅動的發電機組 安全
| Reciprocating internal combustion engine driven generating sets - Safety
|
| EN 55012-2002
| 車輛、艇、內燃機驅動裝置 無線電騷擾特性 用于保護受騷擾對象（除安裝在本車輛/艇/裝置內或相鄰車輛/艇/
| Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/d
|
| EN 60034-22-1997
| 旋轉電機 第22部分：往復式內燃機(RIC)驅動的發電機組用交流發電機
| Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets (IEC 60034-22:1996)
|
| EN ISO 11102-1-1997
| 往復式內燃機 手柄起動裝置 第1部分：安全要求和試驗
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
|
| EN ISO 11102-2-1997
| 往復式內燃機 手柄起動裝置 第2部分：脫開角試驗方法
| Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
|
| EN ISO 11806-1997
| 農林機械 由內燃機驅動的便攜手持式割灌機和割草機 安全
| Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
|
| EN ISO 8178-1-1996
| 往復式內燃機 排放測量 第1部分：氣體和顆粒排放物的試驗臺測量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996)
|
| EN ISO 8178-2-1996
| 往復式內燃機 排放測量 第2部分：氣體和顆粒排放物的現場測量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996)
|
| EN ISO 8178-4-1996
| 往復式內燃機 排放測量 第4部分：不同用途發動機的試驗周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996)
|
| EN ISO 8178-5-1997
| 往復式內燃機 排放測量 第5部分：試驗用燃料
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997)
|
| EN ISO 8178-6-2000
| 往復式內燃機 排放測量 第6部分：測量結果和試驗報告
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000)
|
| EN ISO 9785-2002
| 造船技術 可行駛內燃機車輛的貨艙的通風 氣流總需量的理論計算
| Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines may be driven - Calculation of theoretical total airflow required (ISO 9785:2002)
|
| prEN 88528-11-2002
| 交流發電機組驅動的往復式內燃機 第11部分：旋轉連續動力系統 性能要求和試驗方法
| IEC 88528-11, Ed. 1: Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems; Performance requirements and test methods
|
| prEN ISO 14314-2000
| 往復式內燃機 反向起動設備 一般要求
| Reciprocating internal combustion engines - Re-coil starting equipment - General safety requirements (ISO/DIS 14314:2000)
|
| prEN ISO 6826-1994
| 往復式內燃機 防火
| Reciprocating internal combustion engines - Fire protection (ISO/DIS 6826:1994)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|