| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C63.19-2007 | 無線通信裝置和助聽器間兼容性的測量方法 | Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
| ANSI C82.2-2002 | 熒光燈鎮流器的測量方法 | Method of Measurement of Fluorescent Lamp Ballasts |
| ANSI C82.6-2005 | 高亮度放電燈用標準鎮流器.測量方法 | Lamp Ballasts - Ballasts for High Intensity Discharge Lamps - Method of Measurement |
| ANSI IT2.40-2003 | 攝影用美國國家標準.膠卷(只在一側顯象)的均方根(rms)粒度.測量方法 | American National Standardfor Photography –Root Mean Square (rms) Granularity of Film(Images on One Side Only) –Method for Measuring |
| ANSI PC63.19 D3.17-2006 | 無線通信裝置和助聽器間兼容性的測量方法用美國國家標準 | American National Standard forMethods of Measurement ofCompatibility betweenWireless Communications DevicesandHearing Aids |
| ANSI S1.16-2000 | 噪聲識別和噪聲消除擴音器的性能測量方法 | Method for Measuring the Performance of Noise Discriminating and Noise Cancelling Microphones |
| ANSI S12.56-1999 | 聲學.聲壓法測定噪聲源聲功率級.反射面上包絡測量表面的測量方法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Survey Method using an Enveloping Measurement Surface over a Reflecting Plane |
| ANSI S12.56-1999/ISO 3746-1995 | 聲學.聲壓法測定噪聲源聲功率級.反射面上包絡測量表面的測量方法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Survey Method using an Enveloping Measurement Surface over a Reflecting Plane |
| ANSI S12.7-1986 | 脈沖噪聲的測量方法 | Measurement of Impulse Noise |
| ANSI S3.35-2004 | 在模擬現場工作條件下助聽器性能特性的測量方法 | Methods of Measurement of Performance Characteristics of Hearing Aids Under Simulated In-Situ Working Conditions |
| ANSI S3.46-1997 | 助聽器真耳性能特性的測量方法 | Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids |
| ANSI S4.3-1982 | 錄音和聲音播放設備的加權峰值高頻顫動的測量方法 | Method for measurement of weighted peak flutter of sound recording and reproducing equipment |
| ANSI S4.6-1982 | 中長波磁性錄音的記錄磁通量的測量方法 | Method of measuring recorded flux of magnetic sound records at medium wavelengths |
| ANSI Z80.20-2004 | 眼科:接觸鏡片.標準術語、公差、測量方法和物理化學特性 | Ophthalmics: Contact Lenses - Standard Terminology, Tolerances, Measurements and Physicochemical Properties |
| ANSI/ABMA 13-1987 | 滾動軸承的振動和噪音(測量方法) | Rolling Bearing Vibration and Noise (Methods of Measuring) |
| ANSI/AGMA 2009-B-2001 | 錐形齒輪分類、公差和測量方法 | Bevel Gear Classification, Tolerances and Measuring Methods |
| ANSI/AHAM AC-1-2006 | 便攜式家用室內空氣清潔器性能的測量方法 | Method for Measuring Performance of Portable Household Electric Room Air Cleaners |
| ANSI/AHRI 575-2009 | 設備空間內噪聲測量方法 | Method of Measuring Sound Within an Equipment Space |
| ANSI/ASA S12.42-2010 | 耳中擴音器或聲音試驗固定程序用連續或瞬動的聽力保護裝置介入損失測量方法 | Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real-Ear or Acoustic Test Fixture Procedures |
| ANSI/ASA S12.9 Part 6-2008 | 環境噪聲的描述和測量用音量及程序.第6部分:與家里聽到噪聲情況有關導致驚醒的測量方法 | Quantities and Procedures for Description and Measurement of Environmental Sound - Part 6: Methods for Measurement of Awakenings Associated with Noise Events Heard in Homes |
| ANSI/ASHRAE 41.4-1996 | 液體制冷劑中潤滑油比例的測量方法 | Method for Measurement of Proportion of Lubricant in Liquid Refrigerant |
| ANSI/ASHRAE 41.6-1994 | 潮濕空氣特性的測量方法 | Method for Measurement of Moist Air Properties |
| ANSI/ASHRAE 41.7-1984 | 氣流的標準測量方法 | Standard Method for Measurement of Flow of Gas |
| ANSI/ASTM A971-2000 | 平滾軋電工鋼卷材邊緣錐度和凸面的測量方法 | Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils |
| ANSI/ASTM D3801-2000 | 垂直位置固體塑料可比熄滅特性測量方法 | Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position |
| ANSI/ASTM D4243-1999 | 新舊電工紙和紙板的聚合平均粘度的測量方法 | Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards |
| ANSI/ASTM D4825-1997 | 基本尺寸辦公用紙卷曲度測量方法 | Test Method for Measurement of Curl in Cut-Sized Office Paper |
| ANSI/ASTM D5024-2001 | 壓縮過程中塑料動態機械特性的測量方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Compression (08.03) |
| ANSI/ASTM D5279-2001 | 塑料扭轉動態機械特性測量方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Torsion (08.03) |
| ANSI/ASTM D5947-2001 | 固體塑料樣品物理尺寸測量方法 | Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ANSI/ASTM D668-1999 | 電絕緣用硬條和硬管尺寸測量方法 | Method for Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation (10.01) |
| ANSI/ASTM E1021-1995 | 光伏電池光譜響應的測量方法 | Test Methods for Measuring the Spectral Response of Photovoltaic Cells |
| ANSI/ASTM F1326-1996 | 普通真空吸塵器最大干燥空間測量方法 | Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F2031-2005 | 箭柄靜態韌性(勁度)測量方法 | Method of Measurement of Arrow Shaft Static Spine (Stiffness) |
| ANSI/ASTM F888-1999 | 真空吸塵器主灰塵收集器最大功能容積測量方法 | Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
| ANSI/CEA 2031-2008 | 移動擴音器設備的試驗和測量方法 | Testing and Measurement Methods for Mobile Loudspeaker Systems |
| ANSI/EIA 455-55A-1986 | 光纖涂層幾何尺寸的測量方法 | Coating Geometry of Optical Fibers, Methods for Measuring the |
| ANSI/EIA/TIA 455-168A-1992 | 通過光譜群延遲測量方法對多模分級指數和單模光纖的色散測量.遠場可變孔徑法 | Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement - Variable Aperture Method in the Farfield |
| ANSI/ESD SP5.1.1-2006 | 靜電放電敏感物品防護的標準實施規程.電源針形量規進行人體模型和機械模型的交替測量方法(0部件等級法) | Standard Practice for the Protection of Electrostatic Discharge Susceptible Items - Supply Pin Ganging Human Body Mode (HBM) and Machine Mode (MM) Alternative Test Methods 0 Component Level |
| ANSI/ESD SP5.1.2-2006 | 靜電放電感應物品防護的標準實施規程.分路信號針.人體模型和機械模型的交替測量方法.部件等級 | Standard Practice for the Protection of Electrostatic Susceptible Items - Split Signal Pin - Human Body Model (HBM) and Machine Model (MM) Alternative Test Methods - Component Level |
| ANSI/I3A IT2.39-1998 | 連續色調黑白攝影膠片的攝影調節傳遞函數的測量方法 | Photography - Black-and-White, Continuous -Tone Films - Photographic Modulation Transfer Function |
| ANSI/I3A IT2.40-2003 | 攝影(膠片).膠片的均方根粒度(只在一側有圖像).測量方法 | Photography (Film) - Root mean square (rms) granularity of film (Images on one side only) - Method for measuring |
| ANSI/IEC C78.682-1997 | 鹵鎢石英燈收縮溫度的測量方法 | Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps |
| ANSI/IEEE 1560-2005 | 100赫茲到10千兆赫范圍內射頻電力線路抗干擾濾波器的測量方法標準 | Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
| ANSI/IEEE 187-2003 | 頻率范圍為9 kHz至40 GHz的調頻和電視廣播接收機的輻射測量的標準測量方法 | Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz |
| ANSI/IEEE C37.26-2003 | 低壓感應測試電路功率因數的測量方法 | Guide for Methods of Power Factor Measurement for Low-Voltage Inductive Test Circuits |
| ANSI/IEEE C63.17-2006 | 無執照人員通信服務(UPCS)設備的電磁和操作兼容性的測量方法 | Method of Measurements of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| ANSI/INCITS/ISO/IEC 10561-1999 | 信息技術.辦公設備.打印設備.打印機吞吐量的測量方法.1級和2級打印機 | Information Technology - Office Equipment - Printing Devices - Method for Measuring Throughput - Class 1 and Class 2 Printers |
| ANSI/INCITS/ISO/IEC 19799-2008 | 信息技術.已印刷頁面上光澤一致性的測量方法 | Information technology - Method of measuring gloss uniformity on printed pages |
| ANSI/ISO 3746-1995 | 聲學.聲壓法測定噪聲源聲功率級.對聲音反射平面進行曲面包絡線測量方法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Survey Method using an Enveloping Measurement Surface over a Reflecting Plane |
| ANSI/NAPM IT9.9-1996 | 成像材料.彩色相片的穩定性.測量方法(ANSI IT9.9-1990的修改件和新設計) | Imaging Materials - Stability of Color Photographic Images - Methods for Measuring (revision and redesignation of ANSI IT9.9-1990) |
| ANSI/NFSI B101.1-2009 | 普通硬地板材料潮濕條件的靜態摩擦系數（SCOF）測量方法 | Test Method for Measuring Wet SCOF of Common Hard-Surface Floor Materials |
| ANSI/SAE J551/1-1994 | 車輛和裝置(60 Hz至18 GHz)的電磁兼容的性能水平和測量方法 | Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles and Devices (60 Hz to 18 GHz) |
| ANSI/SAE J551/2-1996 | 車輛、電動船和火花點燃式發動機驅動的無線電干擾特性的測量方法和試驗限值 | Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices |
| ANSI/SAE J551/4-1996 | 車輛和裝置150kHz-1000MHz寬帶和窄帶無線電干擾特性的測量方法和試驗限值 | Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz |
| ANSI/SCTE 119-2006 | 噪聲功率比的測量方法 | Measurement Procedure for Noise Power Ratio |
| ANSI/TIA-102.CAAA-C-2008 | 數字C4FM/CQPSK無線電收發機測量方法 | Digital C4FM/CQPSK Transceiver Measurement Methods |
| ANSI/TIA-455-111-A-2003 | 光纖扭曲強度測量方法 | Procedure for the Measurement of Optical Fiber Curl |
| ANSI/TIA-455-177-B-2003 | IEC 60793-1-43光纖.第1-43部分:測量方法和試驗程序.數值孔徑 | IEC 60793-1-43 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture |
| ANSI/TIA-455-178-B-2003 | FOTP-178 IEC 60793-1-32 光學纖維.第1-32部分:測量方法和試驗規程.涂層可剝離性 | FOTP-178 IEC 60793-1-32 Optical Fibers - Part 1-32: Measurement Methods and Test Procedures - Coating Stripability |
| ANSI/TIA-455-203-A-2009 | 光源周圍流量測量方法 | Light Source Encircled Flux Measurement Method |
| ANSI/TIA-455-211-2000 | FOTP211.IEC 61290-2-3.光纖放大器.基礎規范.第2-3部分:光功率參數的測量方法.光功率計多路分解器 | FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer |
| ANSI/TIA-455-234-2003 | FOTP234.IEC60793-1-52光纖.第1-52部分:測量方法和試驗程序.溫度的改變 | FOTP234 - IEC 60793-1-52 Optical Fibres - Part 1-52: Measurement Methods and Test Procedures - Change of Temperature |
| ANSI/TIA-455-239-2007 | 光纖測試程序(FOTP)-239.光纖絞接件損耗測量方法 | FOTP-239 - Fiber Optic Splice Loss Measurement Methods |
| ANSI/TIA-455-28-C-1999 | 光纖的動態抗拉強度測量方法 | Method for Measuring Dynamic Tensile Strength of Optical Fibers |
| ANSI/TIA-455-71-A-1999 | 溫度沖擊對光纖元部件影響的測量方法 | Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
| ANSI/TIA-455-78B-2002 | FOTP78.IEC 60793-1-40.光纖.第1-40部分:測量方法和試驗程序.衰減 | FOTP78 - IEC 60793-1-40 - Optical Fibres - Part 1-40: Measurement Methods and Test Procedures Attenuation |
| ANSI/TIA/EIA 455-168A-1992 | 用光譜群延遲測量方法進行多模分級指數和單模光纖的色散測量.遠紅外可變孔徑法 | Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement - Variable Aperture Method in the Farfield |
| ANSI/TIA/EIA 455-28-C-1999 | 光纖動態拉伸強度測量方法 | Method for Measuring Dynamic Tensile Strength of Optical Fibers |
| ANSI/TIA/EIA 455-71-A-1999 | 溫度沖擊對纖維光學元部件影響的測量方法 | Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
| ANSI/TIA/EIA 455-78B-2002 | FOTP78.IEC 60793-1-40.光纖.第1-40部分:測量方法和試驗程序.衰減 | FOTP78 - IEC 60793-1-40 - Optical Fibres - Part 1-40: Measurement Methods and Test Procedures Attenuation |
| ASTM C1068-2003 | 在核工業實驗室鑒定測量方法的標準指南 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
| ASTM C1156-2003 | 用于分析核燃料循環材料的測量方法用校準方法的確定的標準指南 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
| ASTM D5280-1996(2007) | 帶線性校準功能的空氣質量測量方法的評定的標準操作規程 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D5737-1995(2006) | 井水排放測量方法的標準導則 | Standard Guide for Methods for Measuring Well Discharge |
| ASTM F16-1967(2006) | 電子器件和電燈用電線及帶條的直徑或厚度測量方法 | Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps |
| IEEE 1206-1994 | 電話手持送受話器和頭戴送受話器的傳送性能的測量方法 | (Methods for measuring transmission performance of telephone handsets and headsets) |
| IEEE 1329-1999 | 無需用手的電話機組傳輸特性的測量方法 | (Method for measuring transmission performance of handsfree telephone sets) |
| IEEE 187-1990 | 無線電接收機-調頻和電視廣播接收機附加輻射的露天測量方法 | (Radio receivers; open field method of measurement of spurious radiation from FM and television broadcast receivers) |
| IEEE 644-1994 | 交流電力線路工業頻率電場和磁場的測量方法 | (Measurement of power frequency electric and magnetic fields from AC power lines) |
| IEEE C 37.082-1982 | 交流電源斷路器聲壓電平的測量方法 | (Methods for the measurement of sound pressure levels of ac power circuit breakers) |
| IEEE C 63.17-1998 | 未經注冊個人通訊服務裝置電磁和操作兼容性測量方法 | (Methods of measurement of the electromagnetic and operational compatibility of Unlicensed Personal Communications Services (UPCS) devices) |
| IEEE C 63.4-2000 | 9kHz-40kHz范圍內低壓電氣設備和電子設備所發射的無線電噪聲的測量方法 | (Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz) |
| 編號 | 中文名稱 | 英文名稱 |