| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 12255-3-2000+AC-2000
| 廢水處理廠 第3部分：預處理
| Wastewater treatment plants - Part 3: Preliminary treatment
|
| EN 12300-1998
| 低溫容器 低溫設備的清潔度
| Cryogenic vessels - Cleanliness for cryogenic service
|
| EN 13507-2001
| 熱噴鍍 熱噴鍍金屬部件和元件的表面預處理
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
|
| EN 2591-604-2001
| 航空航天系列 光電連接元件 試驗方法 第604部分：光學元件 光學表面的清潔度
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face
|
| EN 50176-1996
| 易燃液體噴涂材料用自動靜電噴涂裝置
| Automatic electrostatic spraying installations for flammable liquid spraying material
|
| EN 50177-1996
| 易燃噴涂粉末用自動靜電噴涂裝置
| Automatic electrostatic spraying installations for flammable coating powder
|
| EN 60811-4-2-1999
| 電纜絕緣和護套材料 通用試驗方法 第4部分：聚乙烯和聚丙烯化合物專用方法 第2節：預處理后抗拉強度和斷
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation
|
| EN ISO 11124-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分：一般介紹及分類
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993)
|
| EN ISO 11124-2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分：冷硬鑄鐵丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993)
|
| EN ISO 11124-4-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分：低碳鑄鋼丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
|
| EN ISO 11125-5-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第5部分：缺陷顆粒的百分比和微結構的測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
|
| EN ISO 11126-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第1部分：總體介紹和分類(包括技術勘誤1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:
|
| EN ISO 11126-6-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第6部分：煉鐵爐渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)
|
| EN ISO 11126-8-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第8部分：橄欖石砂
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)
|
| EN ISO 11127-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第1部分：抽樣
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993)
|
| EN ISO 11127-2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
|
| EN ISO 11127-3-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第3部分：表觀密度測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)
|
| EN ISO 11127-4-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第4部分：通過玻璃載片試驗評定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993)
|
| EN ISO 11127-5-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第5部分：含水量測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)
|
| EN ISO 11127-6-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第6部分：通過測量電導率測定水溶性雜質
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993)
|
| EN ISO 11127-7-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第7部分：水溶性氯化物的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993)
|
| EN ISO 8501-1 Supplement-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分的補充信息：用不同磨料噴砂處理時鋼表面
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
|
| EN ISO 8501-1-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分：未涂裝的鋼材和全面清除原有涂層后鋼材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分：局部清除原有涂層后鋼材的銹蝕等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
|
| EN ISO 8502-2-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第2部分：清理過的表面上的氯化物的實驗室測定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
|
| EN ISO 8502-3-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分：油漆前預處理后的鋼材表面上的灰塵評定
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
|
| EN ISO 8502-4-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分：油覆前凝露可能性的評定導則
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
|
| EN ISO 8502-6-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第6部分：分析用可溶性雜質的提取 Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995)
|
| EN ISO 8502-9-2000
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分：水溶性鹽的現場電導測定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
|
| EN ISO 8503-1-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分：磨料噴射清理表面粗糙度的ISO評
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr
|
| EN ISO 8503-2-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分：磨料噴射清理表面粗糙度的定級
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
|
| EN ISO 8503-3-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分：ISO表面輪廓比較儀的校準方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8503-4-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分：ISO表面輪廓比較儀的校準方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8504-1-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分：總則
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
|
| EN ISO 8504-2-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第2部分：磨料噴射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
|
| EN ISO 8504-3-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分：手工和動力工具清洗
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
|
| ENV ISO 8502-1-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第1部分：可溶性鐵銹現場試驗
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991)
|
| prEN 12921-1-1997
| 使用液體或蒸氣的對工業品進行表面清潔和預處理的機器 第1部分：通用安全要求
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements
|
| prEN 12921-2-1997
| 使用液體或蒸氣的對工業品進行表面清潔和預處理的機器 第2部分： 使用水基清洗液的機器安全性
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
|
| prEN 12921-3-1997
| 使用液體或蒸氣的對工業品進行表面清潔和預處理的機器 第3部分使用液體或蒸氣的對工業品進行表面清潔和預
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
|
| prEN 12921-4-1997
| 使用液體或蒸氣的對工業品進行表面清潔和預處理的機器 第4部分：使用鹵化溶劑的機器安全性
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents
|
| 編號 | 中文名稱 | 英文名稱 |
|---|