| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 3212-1995 | 航空航天系列 油漆和清漆 在緩沖氯化納溶劑中用更換浸漬試驗測定耐蝕性 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
| EN ISO 11124-1-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分：一般介紹及分類 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993) |
| EN ISO 11124-2-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分：冷硬鑄鐵丸 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
| EN ISO 11124-3-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分：高碳鑄鋼丸和砂 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993) |
| EN ISO 11124-4-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分：低碳鑄鋼丸 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993) |
| EN ISO 11125-1-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第1部分：抽樣 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993) |
| EN ISO 11125-2-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) |
| EN ISO 11125-3-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第3部分：硬度測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) |
| EN ISO 11125-4-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第4部分：表觀密度測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993) |
| EN ISO 11125-5-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第5部分：缺陷顆粒的百分比和微結構的測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993) |
| EN ISO 11125-6-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第6部分：外來雜質測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993) |
| EN ISO 11125-7-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第7部分：含水量測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993) |
| EN ISO 11126-1-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第1部分：總體介紹和分類(包括技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
| EN ISO 11126-3-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第3部分：銅精煉渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
| EN ISO 11126-4-1998 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第4部分：煤爐渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
| EN ISO 11126-5-1998 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第5部分：鎳精煉渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993) |
| EN ISO 11126-6-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第6部分：煉鐵爐渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993) |
| EN ISO 11126-7-1999 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第7部分：熔融氧化鋁 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
| EN ISO 11126-8-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第8部分：橄欖石砂 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) |
| EN ISO 11127-1-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第1部分：抽樣 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993) |
| EN ISO 11127-2-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993) |
| EN ISO 11127-3-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第3部分：表觀密度測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993) |
| EN ISO 11127-4-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第4部分：通過玻璃載片試驗評定硬度 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) |
| EN ISO 11127-5-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第5部分：含水量測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993) |
| EN ISO 11127-6-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第6部分：通過測量電導率測定水溶性雜質 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993) |
| EN ISO 11127-7-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第7部分：水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993) |
| EN ISO 21227-1-2003 | 油漆和清漆 用光學成像法評價涂漆表面的缺陷 第1部分：一般指南 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 8501-1 Supplement-2001 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分的補充信息：用不同磨料噴砂處理時鋼表面 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast |
| EN ISO 8501-1-2001 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分：未涂裝的鋼材和全面清除原有涂層后鋼材 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo |
| EN ISO 8501-2-2001 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分：局部清除原有涂層后鋼材的銹蝕等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| EN ISO 8502-2-1999 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第2部分：清理過的表面上的氯化物的實驗室測定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992) |
| EN ISO 8502-3-1999 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分：油漆前預處理后的鋼材表面上的灰塵評定 | Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992) |
| EN ISO 8502-4-1999 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分：油覆前凝露可能性的評定導則 | Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993) |
| EN ISO 8502-6-1999 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第6部分：分析用可溶性雜質的提取 Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995) |
| EN ISO 8502-9-2000 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分：水溶性鹽的現場電導測定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998) |
| EN ISO 8503-1-1995 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分：磨料噴射清理表面粗糙度的ISO評 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr |
| EN ISO 8503-2-1995 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分：磨料噴射清理表面粗糙度的定級 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce |
| EN ISO 8503-3-1995 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分：ISO表面輪廓比較儀的校準方法和 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8503-4-1995 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分：ISO表面輪廓比較儀的校準方法和 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8504-1-2001 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分：總則 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
| EN ISO 8504-2-2001 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第2部分：磨料噴射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 8504-3-2001 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分：手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993) |
| ENV 12837-2000 | 涂料和油漆 采用防護漆的鋼結構防蝕措施檢查員的資格 | Paints and varnishes - Qualification of inspectors for corrosion protection of steel structures by protective paint systems |
| ENV ISO 8502-1-1999 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第1部分：可溶性鐵銹現場試驗 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991) |
| prEN 971-2-1996 | 色漆和清漆 涂層材料的術語和定義 第2部分：與油漆特性和性能有關的特定術語 | Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties |
| prEN ISO 19840-2003 | 油漆和清漆 用防護漆對鋼結構粗表面進行防腐 干膜厚度的測量及驗收標準 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003) |
| 編號 | 中文名稱 | 英文名稱 |