| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 11481-1981
| 乳品機械.乳品場運輸車輛用管道.安裝和絕熱
| Dairy machines; pipelines for rolling stock in dairies; installation and insulation
|
| DIN 11832-1-1990
| 農場和牲畜飼養設備.輸送液態糞肥的管道用閥門管件.第1部分:最大1巴的靜壓力閘閥
| Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
|
| DIN 1185-1-1973
| 排水.管道排水、明渠排水和底層土壤改良的地下水控制.一般說明和特殊情況
| Drainage; Control of Sub-surface Water Management by Draining with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; General Instructions and Special Cases
|
| DIN 1185-2-1973
| 排水.管道排水.明渠排水和底層土壤改良的地下水控制.規劃和計量尺寸的重要數據
| Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Important Data for Planning and Dimensioning
|
| DIN 1185-3-1973
| 排水.管道排水.明渠排水和底層土壤改良的地下水控制.結構
| Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Construction
|
| DIN 1185-4-1973
| 排水.管道排水.明渠排水和底層土壤改良的地下水控制.設計和“完工”圖紙
| Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Design and "As Completed" Drawings
|
| DIN 1185-5-1973
| 排水.管道排水.明渠排水和底層土壤改良的地下水控制.保養
| Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Maintenance
|
| DIN 14365-2-1986
| 公稱壓力 16 的多用途三通管道.第2部分:要求、檢驗
| Multi purpose branch pipes for nominal pressure 16; requirements, testing
|
| DIN 14461-5-1984
| 與干式滅火上升總管道連接的輸送閥裝置.PN16救火軟管閥
| Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
|
| DIN 14463-3-2003
| 消防用水設備.遙控注水和排水裝置.地3部分:"濕/干"和"干"滅火管道系統PN16通風閥
| Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry"
|
| DIN 16450-1994
| 未增朔聚氯乙烯壓力管道的套管接頭.符號
| Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols
|
| DIN 16831-5-1999
| 聚丁烯(PB)制壓力管道用管連接件和零件.PB125.第5部分:一般質量要求、試驗
| Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing
|
| DIN 16831-6-2003
| 管道連接件和壓力管用聚丁烯(PB)元件.PB 125. 第6部分:電阻焊管件.尺寸
| Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions
|
| DIN 16831-7-2004
| 壓力管道用聚丁烯(PB)管子接頭和元件.PB125.第7部分:承插焊接用法蘭接頭、法蘭和密封環.尺寸
| Pipe joints and components of polybutene (PB) for pipes under pressure - PB 125 - Part 7: Flange adapters, flanges, sealing rings for socket welding, dimensions
|
| DIN 16832-2-2002
| 加壓管道用氯化的聚氯乙烯管連接件和部件.PVC-C 200.第2部分:一般質量試驗要求
| Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 2: General quality requirements, testing
|
| DIN 16867-1982
| 化工管路用玻璃纖維增強式聚酯樹脂管道、配件和接頭.交貨技術條件
| Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions
|
| DIN 16872-1993
| 熱塑性塑料管道用管接頭組件.玻璃纖維增強的聚酯樹脂(UP-GE)法蘭.尺寸
| Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions
|
| DIN 16874-2000
| 電纜輸送管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和技術交貨條件
| Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions
|
| DIN 16876-2000
| 地下管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和交貨技術條件
| Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting - Dimensions and technical delivery conditions
|
| DIN 16888-1-1989
| 熱塑性塑料管道化學阻抗的測定.第1部分:聚烯烴管道
| Determination of chemical resistance of thermoplastics pipes; polyolefin pipes
|
| DIN 16888-2-1991
| 熱塑性塑料管道化學阻抗的測定.第2部分:未增塑聚氯乙烯(PVC-U)管道
| Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes
|
| DIN 16889-1-1989
| 熱塑性塑料管道化學阻抗的測定.第1部分:聚烯烴管道
| Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes
|
| DIN 16928-1979
| 熱塑性塑料管道.管接頭、管道部件、管道敷設.一般說明
| Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions
|
| DIN 16962-1-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用弓形結構彎頭.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
|
| DIN 16962-10-1989
| 1型、2型和3型的聚丙烯壓力管道用管道連接組件和管道配件.第10部分:對焊用噴射模塑配件尺寸
| Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions
|
| DIN 16962-11-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.用于對焊的車削和壓制減徑管套.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
|
| DIN 16962-12-1999
| 聚丙烯(PP)制壓力管道用管連接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸緣接頭、法蘭、密
| Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16962-13-1987
| 1型和2型聚丙烯壓力管道用管連接件和接頭.管接頭.尺寸
| Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions
|
| DIN 16962-2-1983
| 1型和2型聚丙烯壓力管道用管接頭組件和接頭.用對焊的分段嵌入和減頸方法制造的T型管及支管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
|
| DIN 16962-3-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用管成形彎頭.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
|
| DIN 16962-4-1988
| 1型和2型聚丙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸
| Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16962-5-2000
| 聚丙烯壓力管道用管連接件和零件.PP-H100,PP-B80,PP-R80.第5部分:一般質量要求.試驗
| Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing
|
| DIN 16962-6-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑彎頭.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
|
| DIN 16962-7-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑三通.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
|
| DIN 16962-8-1980
| 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑管套和管帽.尺寸
| Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
|
| DIN 16962-9-1983
| 1型和2型聚丙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-1-1980
| .1型和2型高密度聚乙烯壓力管道用管連接件.對焊用弓形結構的管子彎頭.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
|
| DIN 16963-10-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑套筒與帽蓋.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
|
| DIN 16963-11-1999
| 聚乙烯(PE)制壓力管道用管連接件和零件.PE 80和PE 100.第11部分:承口焊接用凸緣接頭、法蘭、密封圈.尺寸
| Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16963-13-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用車削的和壓制的縮徑承接件.尺寸
| Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
|
| DIN 16963-14-1983
| 1型和2型高密度聚乙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-15-1987
| 高密度聚乙烯壓力管道用管連接件和接頭.管接頭.尺寸
| Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions
|
| DIN 16963-2-1983
| 1型和2型高密度聚乙烯壓力管道用管接頭組件和配件.用對焊的分段嵌入和縮頸方法制造的T型管及支管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
|
| DIN 16963-3-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用彎管.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
|
| DIN 16963-4-1988
| 高密度聚乙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸
| Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16963-5-1999
| 加壓管道 PE 80 和 PE 100用聚乙烯管道連接件和部件.第5部分:一般質量要求和實驗
| Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 5: General quality requirements, testing
|
| DIN 16963-6-1989
| 高密度聚乙烯壓力管用管道連接組件和管道配件.第6部分:對焊用噴射模塑配件尺寸
| Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
|
| DIN 16963-7-1989
| 高密度聚乙烯壓力管道用管道連接組件和管道配件.第7部分:電阻焊接配件尺寸
| Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
|
| DIN 16963-8-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑彎管.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
|
| DIN 16963-9-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑三通管件.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
|
| DIN 16966-2-1982
| 玻璃纖維增強式聚酯樹脂管道配件和接頭.彎管.尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions
|
| DIN 16966-7-1995
| 玻璃纖維增強聚酯樹脂管道連接件及其組件.第7部分:套筒、法蘭、法蘭連接和對接件.一般質量要求和試驗方法
| Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
|
| DIN 16970-1970
| 硬聚氯乙烯(PVC)制管子和管道零件粘接用膠粘劑.一般質量要求和檢驗
| Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings
|
| DIN 18319-2000
| 建筑工程承包條例.第C部分:建筑工程通用技術規范.管道掘進工程
| Contract procedures for building works - Part C: General technical specifications for building works; Pipe drilling works
|
| DIN 19531-10-1999
| 建筑物污水和污物排放系統用未增塑聚氯乙烯(PVC-U)套管道和配件.第10部分:燃燒性能、質量控制和安裝的推薦
| Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
|
| DIN 19537-3-1990
| 排污系統用高密度預制聚乙烯管道檢修孔.第3部分:尺寸和交貨技術條件
| Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions
|
| DIN 19538-10-1999
| 建筑物內耐熱污水和污物排放系統用氯化的聚氯乙烯(PVC-C)管道和配件.第10部分:燃燒性能、質量控制和安裝的
| Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
|
| DIN 19558-2002
| 廢水處理廠.儲罐出口裝置、溢水口、浮渣檔板和浸沒式排水管道.建造原則、主要尺寸和布局
| Wastewater treatment plants - Outlet installations, weir and scum baffle, submerged effluent pipes in tanks - Construction principles, main dimensions, layout
|
| DIN 19559-1-1983
| 明渠和重力管道中廢水流量的測量.一般信息
| Measurement of flow of waste water in open channels and gravity conduits; general information
|
| DIN 19559-2-1983
| 明渠和重力管道中廢水流量的測量.文丘里氏水槽
| Measurement of flow of waste water in open channels and gravity conduits; venturi flumes
|
| DIN 19565-5-1990
| 排污系統用高密度預制聚乙烯管道檢修孔.第5部分:尺寸和交貨技術條件
| Prefabricated glass fibre reinforced plastic (UP-GF) manholes for use in sewerage systems; dimensions and technical delivery conditions
|
| DIN 19658-2-1994
| 灌溉系統用可卷繞聚乙烯(PE)管道和軟管.第2部分:形狀固定的織物芯層軟管.尺寸和供貨技術條件
| Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions
|
| DIN 19666-2001
| 排水管道和滲濾管道.一般要求
| Drain pipes and percolation pipes - General requirements
|
| DIN 19667-1991
| 廢碴埋填的污水排放管道系統.設計、建造和使用
| Drainage of landfills; code of practice for design, construction and operation
|
| DIN 19802-1977
| 石棉水泥壓力管道用鑄鐵專用鑄件.套管頭
| Cast iron special castings for asbestos cement pressure pipelines; spigot ends
|
| DIN 19803-1977
| 石棉水泥壓力管道的鑄鐵專用鑄件.帶法蘭套管
| Cast iron special castings for asbestos cement pressure pipelines; flanged spigots
|
| DIN 19804-1977
| 石棉水泥壓力管道用鑄鐵專用鑄件.錐形件
| Cast iron special castings for asbestos cement pressure pipelines; tapers
|
| DIN 19805-1977
| 石棉水泥壓力管道用鑄鐵的專用鑄件.彎管頭
| Cast iron special castings for asbestos cement pressure pipe lines; bends
|
| DIN 19806-1977
| 石棉水泥壓力管道專用鑄鐵鑄件.支管
| Cast iron special castings for asbestos cement pressure pipelines; branches
|
| DIN 19807-1977
| 石棉水泥壓力管道的專用鐵鑄件.鑄鐵管的連接件
| Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
|
| DIN 19808-1977
| 石棉水泥壓力管道用鑄鐵專用鑄件.管堵
| Cast iron special castings for asbestos cement pressure pipelines; plugs
|
| DIN 19850-1-1996
| 污水管道用纖維水泥管和配件件.第1部分:管,支管和彎頭尺寸
| Fibre cement pipes and fittings for sewers - Part 1: Dimensions of pipes, branches and bends
|
| DIN 1998-1978
| 公共區域管道設施的布置.計劃原則
| Placing of service conduits in public areas; directives for planning
|
| DIN 20002-1-1989
| 礦山管道.帶活動法蘭和平凸緣的鋼管.標稱壓力10
| Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10
|
| DIN 20002-2-1989
| 礦山管道.帶活動法蘭和凸緣的鋼管.標稱壓力6
| Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6
|
| DIN 20002-3-1989
| 礦山用管道.帶活動法蘭和平凸緣的鋼管.標稱壓力40
| Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40
|
| DIN 20006-1989
| 采礦用管道.符合DIN20002的鋼管材和符合DIN20003的連接件用密封圈
| Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003
|
| DIN 2403-1984
| 按輸送流體區分的管道標志
| Identification of pipelines according to the fluid conveyed
|
| DIN 2404-1942
| 加熱系統管道的標示顏色
| Identification Colour Code for Heating System Pipelines
|
| DIN 24118-1984
| 建筑機械和建筑材料機械.混凝土輸送管道.尺寸
| Construction machines and machines for building materials; concrete delivery pipelines; dimensions
|
| DIN 24190-1998
| 通風和空調設備.折疊的和焊接的矩形金屬薄板管道
| Ventilation and air conditioning - Folded and welded rectangular sheet metal ducts
|
| DIN 24192 Bb.1-1985
| 通風設備管道.薄板金屬管道和薄板金屬管道付件的連接.輕型連接結構的示例
| Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components; examples of light joint constructions
|
| DIN 24192-1985
| 通風設備管道.薄板金屬管道和薄板金屬部件的連接
| Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components
|
| DIN 24193-1-1988
| 通風設備用管道.法蘭.系列1.角鋼法蘭
| Ducting for ventilation equipment; flanges; series 1; angle flanges
|
| DIN 24193-2-1988
| 通風設備用管道.法蘭.系列2.平面法蘭和角鋼法蘭
| Ducting for ventilation equipment; flanges; series 2; flat and angle flanges
|
| DIN 24193-3-1988
| 通風設備用管道.法蘭.系列3.平面法蘭和角鋼法蘭
| Ducting for ventilation equipment; flanges; series 3; flat and angle flanges
|
| DIN 2429-1-1988
| 工程圖紙的管道部件符號表示法.第1部分:基本要求
| Symbolic representation of pipework components for use on engineering drawings; basic requirements
|
| DIN 2429-2 Bb.1-1988
| 工程圖紙的管道部件符號表示法.功能表示法.第2 Bb 1部分:流量開通或關閉示例
| Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow
|
| DIN 2429-2-1988
| 工程圖紙的管道部件符號表示法.第2部分:功能表示法
| Symbolic representation of pipework components on engineering drawings; functional representation
|
| DIN 2430-1-2001
| 清管裝置管道.第1部分:管和肘管
| Piping for pigging systems - Part 1: Pipes and elbows
|
| DIN 2430-2-2002
| 清管裝置管道.第2部分:管連接件
| Piping for pigging systems - Part 2: Piping connections
|
| DIN 2430-3-2002
| 清管裝置管道.第3部分:使用前測試
| Piping for pigging systems - Part 3: Testing prior to commissioning
|
| DIN 2470-1-1987
| 允許工作壓力16巴以下的氣體輸送用鋼管道.管道和配件
| Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings
|
| DIN 25423 Bb.1-1987
| 空氣中放射性監控的取樣.根據估計值對取樣空氣管道和設施中微粒損耗進行計算的說明
| Sampling procedures for the monitoring of radioactivity in air; instructions for the calculation of particle loss in sampling air ducts and instructions on estimates of errors due to anisokinetic sampling
|
| DIN 25423-2-2000
| 大氣放射性監控的取樣方法.第2部分:從管道和煙囪取樣的特殊要求
| Sampling procedures for the monitoring of radioactivity in air - Part 2: Special requirements for sampling from air ducts and stacks
|
| DIN 25427-1-1977
| 防γ射線輻射的混凝土屏蔽墻中雙彎充氣管道的設計.術語和條件
| Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions
|
| DIN 25432-1991
| 穿過反應堆安全殼的管道貫穿件
| Pipe penetrations through the reactor containment
|
| DIN 2559-3-1990
| 焊縫預加工.第3部分:焊接管道圓周焊縫的內徑配合
| Preparation of welds; matching of inside diameters for circumferential welds on welded pipes
|
| DIN 27202-9-2006
| 鐵路車輛狀態.車輛的上層結構和專用設備.第9部分:裝有對水有害物質的裝置和易燃物質用容器和管道系統
| State of railway vehicles - Superstructure and special equipment of vehicles - Part 9: Installations which contain substances dangerous to water as well as tanks and pipe systems for flammable substances
|
| DIN 2848-2002
| 帶襯里的法蘭鋼管和法蘭鋼管道或法蘭鑄鐵配件.PN 10、PN 25 和 PN 40
| Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40
|
| DIN 28601-2000
| 延性鑄鐵管道和配件.螺紋套管接頭.組件、套管、螺絲環、密封環和滑動環
| Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
|
| DIN 28603-2002
| 可鍛鑄鐵管道和配件.插入式連接件.測量、管座和密封墊
| Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
|
| DIN 2873-2002
| 帶玻璃襯里的法蘭連接管道和法蘭鋼.PN 10和PN 25
| Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25
|
| DIN 2874-2002
| 帶聚四氟乙烯或PFA襯里的鋼制法蘭管道和鋼制與鑄鐵法蘭配件.技術規范
| Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications
|
| DIN 2875-2002
| 帶硬質或軟質橡膠襯里的法蘭鋼管道和法蘭鋼配件.技術規范
| Flanged steel pipes and flanged steel fittings with hard or soft rubber lining - Technical specifications
|
| DIN 2876-2002
| 帶玻璃襯里的法蘭鋼管道和法蘭鋼配件.技術規范
| Flanged steel pipes and flanged steel fittings glass lined - Technical specifications
|
| DIN 30658-1-1998
| 地下煤氣管道接頭附加密封材料.第1部分:已密封煤氣管道附加密封用塑料薄膜和織物襯套.安全要求和試驗
| Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
|
| DIN 30658-2-1999
| 地下煤氣管道用后續密封材料.第2部分:地下煤氣管道接頭用后續密封材料.安全要求和試驗
| Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing
|
| DIN 30672-2000
| 持續工作溫度不超過50℃的地下和水下管道外部有機防腐涂層.帶材和可收縮材料
| External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials
|
| DIN 30674-3-2001
| 護套式可塑鑄鐵管道.第3部分:帶護套保護的鍍鋅層
| Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing
|
| DIN 30675-1-1992
| 地下敷設的管道的外層防腐.鋼管的防腐措施
| External corrosion protection of buried pipes; corrosion protection systems for steel pipes
|
| DIN 30675-2-1993
| 掩埋管道的外部防腐.球墨鑄鐵管的防腐蝕系統
| External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes
|
| DIN 30677-1-1991
| 埋設管道的腐蝕保護.第1部分:公稱要求的涂層
| Corrosion protection of burried valves; coating for normal requirement
|
| DIN 32-3-1981
| 包裝.預包裝的包裝手段.第3部分:管道用盒量度的測定
| Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes
|
| DIN 3280-1988
| 家用供水管道的閥門.公稱壓力 PN 10 以下的錐形連接管.概述
| Valves for domestic water supply; tapered unions up to PN 10; survey
|
| DIN 3281-1988
| 家用供水管道的閥門.公稱壓力10的錐形管子接頭.概述
| Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
|
| DIN 3283-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶內螺紋的廢水排放連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
|
| DIN 3284-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶外螺紋的連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
|
| DIN 3285-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.軟管連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
|
| DIN 3287-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.管路用帶螺紋的連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
|
| DIN 3289-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的錐形管子接頭
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
|
| DIN 3291-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的軟管連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
|
| DIN 3386-1973
| 內部氣體設施管道的過濾器
| Filters in interior gas-installation pipes
|
| DIN 3387-1-1991
| 第1部分:金屬煤氣管道用可拆卸的無螺紋管連接件
| Separable unthreaded pipe connections for metal gas pipes
|
| DIN 3387-2-1991
| 煤氣管道用帶法蘭接頭的金屬管道管連接件
| Tube connections for metallic tubes having flanged ends for gas pipes
|
| DIN 3444-1997
| 帶焊接端和螺紋端的管道部件防護蓋
| Protective caps for pipe fittings with welded and threaded ends
|
| DIN 3535-6-1999
| 供氣用密封墊.第6部分:氣閥、煤氣設備和煤氣主管道用基于合成纖維、石墨或聚四氟乙烯的密封墊材料
| Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
|
| DIN 3536-1994
| 室內設備、煤氣分配和煤氣輸送管道的煤氣閥用潤滑劑
| Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
|
| DIN 3543-4-1984
| 高密度管道用高密度聚乙烯排放閥.尺寸
| High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
|
| DIN 3581-1990
| 氣體管道.1號規格的管閥箱
| Gas pipelines; size 1 valve box
|
| DIN 3582-1990
| 氣體管道.2號規格的管閥箱
| Gas pipelines; size 2 valve box
|
| DIN 3583-1990
| 氣體管道.3號規格的管閥箱
| Gas pipelines; size 3 valve box
|
| DIN 3584-1990
| 氣體管道.4號規格的管閥箱
| Gas pipelines; size 4 valve box
|
| DIN 3585-1990
| 氣體管道.5號規格的管閥箱
| Gas pipelines; size 5 valve box
|
| DIN 4000-16-1988
| 第16部分:管道配件用物品特性表格設計
| Tabular layouts of article characteristics for pipeline fittings
|
| DIN 4034-10-1995
| 預制混凝土和鋼筋混凝土井筒和檢驗室.第10部分:地下敷設排水管道用磚砌井筒底部.要求和檢驗
| Prefabricated concrete and reinforced concrete manholes and inspection chambers - Part 10: Brick manhole bases for buried drains and sewers; requirements and testing
|
| DIN 4065-1974
| 氣體管道指示標簽
| Gas pipelines indicating labels
|
| DIN 4262-1-2001
| 土木工程地下排水用管道系統.第1部分:塑料管
| Piping systems for civil engineering subsoil drainage - Part 1: Plastic pipes
|
| DIN 4263-1991
| 給排水工程的污水管、排水管和管道的形狀、尺寸和幾何值
| Shapes, dimensions and geometrical values of sewers, drains and pipelines for water and waste water engineering
|
| DIN 43614-1-1979
| 壓力氣體管道的轉換開關裝置和控制裝置..銅導管
| Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits
|
| DIN 43614-2-1980
| 開關裝置和控制裝置.壓縮空氣管道用管.不銹鋼管
| Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits
|
| DIN 45635-62-1989
| 機器排放的空氣傳播噪聲的測量.第62部分:包洛面法.混凝土磚塊、板條、管道和預制件生產用機器和設備
| Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements
|
| DIN 4721-2001
| 地板熱水供熱系統和散熱器連接用塑料管道系統.高耐溫性聚乙烯
| Plastic piping systems for warm water floor heating systems and radiator connecting - Polyethylene of raised temperature resistance (PE-RT)
|
| DIN 4724-2001
| 熱水地板供熱系統用塑料管道系統和輻射管道連接,中等密度的交叉鏈接的聚乙烯
| Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
|
| DIN 4725-200-2001
| 地板供熱.系統和元件.第200部分:管道覆蓋層大于0.065M的熱輸出測定
| Floor heating, systems and components - Part 200: Determination of the thermal output, pipe coverings larger than 0,065 m
|
| DIN 4726-2000
| 熱水地板加熱系統和散熱器管道連接.塑料管道
| Warm water floor heating systems and radiator pipe connecting - Piping of plastic materials
|
| DIN 4740-2-1987
| 通風設備.無增塑的聚氯乙烯垂直管道.彎管配件.最小壁厚
| Ventilation plant; unplasticized polyvinylchloride (PVC-U) uptakes; pipe fittings, bends; minimum wall thickness
|
| DIN 4740-5-1988
| 通風設備.無增塑劑的聚氯乙烯非加固管道.第5部分:最小壁厚
| Ventilation plant; unplasticized polyvinylchloride (PVC-U) pipes; non-reinforced ducts; minimum wall thickness
|
| DIN 4741-2-1987
| 通風設備.Ⅰ型聚丙烯(PP)垂直管道.彎管配件.最小壁厚
| Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses
|
| DIN 4741-5-1988
| 通風設備.聚丙乙烯(PP)Ⅰ型非加固管道.第5部分:最小壁厚
| Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness
|
| DIN 4815-3-1985
| 液化氣用軟管.運輸車輛用加氣和排空用軟管管道
| Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles
|
| DIN 4815-5-1988
| 液化氣用軟管.車輛液化氣管道用軟管接合器.第5部分:安全要求概念、試驗、標記
| Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking
|
| DIN 50927-1985
| 對儀器.容器和管道內表面的電化學防腐的計劃與實施（內部防護）
| Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection)
|
| DIN 50929-3-1985
| 金屬腐蝕.承受外部腐蝕時金屬材料腐蝕的概率.掩埋的和水中的管道和結構零組件構件
| Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
|
| DIN 53769-1-1988
| 玻璃纖維增強塑料管道檢驗.第1部分:B型管道配件縱向剪切強度的測定
| Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
|
| DIN 53769-2-1986
| 玻璃纖維增加塑料管道檢驗.長期靜液壓試驗
| Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
|
| DIN 53769-6-1989
| 玻璃纖維增強塑料管道檢驗.第6部分:受內壓脈動作用的管道和配件
| Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
|
| DIN 54141-1-1982
| 無損檢驗.管道和管子的渦流檢驗.用單頻率法和同心試驗線圈檢驗的概要
| Non-destructive testing; Eddy current testing of pipes and tubes; General remarks on testing using concentric test coils and the single-frequency method
|
| DIN 54141-2-1982
| 無損檢驗.管道和管子的渦流檢驗.用同心試驗線圈的渦流檢驗系統性能測定與校正的基準方法
| Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
|
| DIN 54141-3-1987
| 無損檢驗.管道和管子的渦流檢驗.程序
| Non-destructive testing; eddy current testing of pipes and tubes; procedure
|
| DIN 54841-3-2000
| 地下電纜和管道用塑料報警裝置.第3部分:可檢測的表
| Plastic warning devices for buried cables and pipelines - Part 3: Detectable table
|
| DIN 54841-5-2000
| 地下電纜和管道用塑料報警裝置.第5部分:電纜覆層
| Plastic warning devices for underground cables and pipelines - Part 5: Cable cover
|
| DIN 58809-1972
| 骨釘器械.管道擴孔器
| Instruments for intramedullary nailing; intermedullary canal reamer
|
| DIN 65178-1-1985
| 航空航天.流體管道結構和安裝.概述和定義
| Aerospace; configuration and installation of fluid pipelines; survey and definitions
|
| DIN 65178-2-1985
| 航空航天.液體管道的構造形式和安裝.管道組件、設計
| Aerospace; configuration and installation of fluid pipelines; tube assemblies, design
|
| DIN 65178-3-1985
| 航空航天.液體管道的構造形式和安裝.管道組件.制造
| Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture
|
| DIN 65178-6-1987
| 航空航天.液體管道的構造和設計.軟管組件、制造
| Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture
|
| DIN 6620-2-1981
| 礦物油地上存貯用成排容器 .連接管道
| Battery tanks for aboveground storage of mineral-oils, connection lines
|
| DIN 6654-1996
| 風動管道系統.圖形符號
| Pneumatic tube conveyor systems - Graphic symbols
|
| DIN 6656-1997
| 風動管道系統.風動管道系統鋼和不銹鋼傳送管、傳送管彎頭和套管
| Pneumatic tube system - Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel
|
| DIN 6660-1996
| 風動管道系統.無增塑劑聚氯乙烯(硬聚氯乙烯)傳送管,傳送管彎頭和接頭
| Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U)
|
| DIN 73365-3-1970
| 柴油機噴射泵.第3部分:壓力管道連接件
| Injection pumps for Diesel engines; pressure pipe connections
|
| DIN 74233-1-1991
| 液壓制動系統.制動管道配件.第1部分:制動管道外用配件
| Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes
|
| DIN 74233-2-1991
| 液壓制動系統.制動管道配件.第2部分:制動管道管接螺母
| Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
|
| DIN 74324-1-1996
| 氣動制動設備.聚酰胺管和管道.第1部分:要求和試驗
| Air braking systems - Thermoplastic tubing - Part 1: Requirements and tests
|
| DIN 74347-1998
| 空氣制動系統.管道的空氣過濾器
| Air braking systems - Air filter for pipes
|
| DIN 8063-1-1986
| 未增塑聚氯乙烯壓力管道用管連接組件和接頭.承口彎頭尺寸
| Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
|
| DIN 8063-10-2002
| 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第10部分:管壁支架彎管接頭.尺寸
| Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 10: Wall bracket elbows; Dimensions
|
| DIN 8063-11-1980
| 未增塑聚氯乙烯(剛性 PVC)壓力管道的管道連接和管道配件.第11部分:粘合用基體為銅鋅合金(黃銅)的套管尺寸
| Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions
|
| DIN 8063-12-1987
| 未增塑聚氯乙烯壓力管道的管連接組件和接頭.帶法蘭的和承口接頭的尺寸
| Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings
|
| DIN 8063-2-1980
| 未增塑聚氯乙烯(剛性 PVC)壓力管道的管道連接和管道配件.第2部分:粘合用注塑彎頭尺寸
| Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions
|
| DIN 8063-3-2002
| 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第3部分:管接頭:尺寸
| Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 3: Unions; Dimensions
|
| DIN 8063-4-1983
| 未增塑聚氯乙烯壓力管道用管連接組件和接頭.內外螺母、法蘭盤、密封件.尺寸
| Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
|
| DIN 8063-5-1999
| 未增塑聚氯乙烯壓力管道用管接頭和元件(PVC-U).第5部分:一般質量要求、試驗
| Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing
|
| DIN 8063-6-2002
| 非增塑聚氯乙烯壓力管道連接件和配件.第6部分:溶劑粘結用壓鑄彎頭.尺寸
| Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions
|
| DIN 8063-7-1980
| 未增塑聚氯乙烯(未增塑 PVC)壓力管道的管道連接和管道配件.第2部分:冷粘合注塑三通和支管尺寸
| Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions
|
| DIN 8063-8-2002
| 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第8部分:溶劑粘結用噴射模塑套管、帽和管接頭.尺寸
| Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions
|
| DIN 8063-9-1980
| 未增塑聚氯乙烯受壓管道的管道連接件及其元件.第9部分:冷焊用注塑管節異徑尺寸
| Pipe joints and their elements for pipes of unplasticized polyvinylchloride (unplasticized PVC) under pressure; sockets reducing of injection moulded for cold welding, dimensions
|
| DIN 8076-1-1984
| 熱塑性塑料壓力管道.聚乙烯管道的金屬壓縮接頭.一般質量要求、檢驗
| Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing
|
| DIN 8076-3-1994
| 熱塑性塑料壓力管道.第3部分.聚乙烯管道的塑料接頭.一般質量要求和試驗
| Pressure pipelines made from thermoplastics materials - Part 3: Plastic joints for PE pipes; general quality requirements, testing
|
| DIN 85004-9-1997
| 銅-鎳合金管道.第9部分:透視檢驗總則
| Pipelines of copper-nickel-alloys - Part 9: General principles for radiographic testing
|
| DIN 86001-1997
| 船舶管道.壓力等級.試驗
| Pipelines on ships - Pressure ratings, tests
|
| DIN 86016-1991
| 船舶用未增塑的聚氯乙烯管道的鋼管支架
| Pipe brackets of steel for ships pipelines of unplasticized polyvinyl cloride (PVC-U)
|
| DIN 86037-1-1995
| 銅鎳合金管道的活套法蘭和焊接凸肩.第1部分:組裝
| Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 1: Assembly
|
| DIN 86037-2-1995
| 銅鎳合金管道的活套法蘭和焊接凸肩.第2部分:焊接凸肩
| Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks
|
| DIN 86037-3-1995
| 銅鎳合金管道的活套法蘭和焊接凸肩.第3部分:活套法蘭
| Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges
|
| DIN 86044-1980
| 船舶排氣管道.法蘭盤
| Exhaust gas lines on ships; flanges
|
| DIN 86072-1992
| 船用排氣管道.密封墊
| Exhaust gas lines on ships; gaskets
|
| DIN 86110-1988
| 船舶維護油箱管道系統.灌裝與壓力平衡設備.探測管
| Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes
|
| DIN 86125-2001
| 船用管道.管和管道設備.總則
| Pipelines for shipboard use - Pipes and pipeline equipment - Synopsis
|
| DIN 86150-1996
| 管道焊接套管
| Welding sockets for pipes
|
| DIN 86151-1996
| 船舶操作油箱管道.術語、定義、符號
| Ship operation tank pipework - Terms, definitions, symbols
|
| DIN 86287-1999
| 船舶和海上建筑結構的管道.帶插接口和插套的鋼管和管接頭.鋪設和處理
| Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment
|
| DIN 87344-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.調定連接用方形孔叉形連桿
| Remote control gear with transmission tubing for manual operation; fork links with square hole for setting-up connection
|
| DIN 87346-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.軸承
| Remote control gear with transmission tubing for manual operation; bearings
|
| DIN 87349-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.傘齒輪傳動裝置
| Remote control gear with transmission tubing for manual operation; bevel gear units
|
| DIN 87373-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.防水導向軸承
| Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight
|
| DIN 8905-1-1983
| 帶密封和半密封壓縮機的制冷設備用管道.外徑54mm以下.交貨技術條件
| Tubes for refrigerating systems with hermetic and semi-hermetic compressors; outside diameter up to 54 mm; technical delivery conditions
|
| DIN 8905-3-1983
| 帶密封和半密封壓縮機的制冷系統用管道.毛細節流閥的補充交貨技術條件
| Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
|
| DIN CEN/TS 12200-2-2003
| 地面上使用的雨水塑料管道系統.未增塑的聚氯乙烯(PVC-U).第2部分:一致性評定指南
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12200-2:2003
|
| DIN CEN/TS 12201-7-2003
| 給水用塑料管道系統.聚乙烯.第7部分:合格評定指南
| Plastics piping systems for water supply - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 12201-7:2003
|
| DIN CEN/TS 12666-2-2006
| 非壓力地下排水和污水管道用塑料管道系統.聚丙烯(PE).第2部分:一致性評估指南.德文版本CEN/TS 12666-2-2005
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005
|
| DIN CEN/TS 13244-7-2003
| 通用、排水和污水用地下和地上壓力系統用塑料管道系統.聚乙烯.第7部分:合格評定指南
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003
|
| DIN CEN/TS 1456-2-2003
| 直埋式和地上排水和排污用壓力塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:符合性評定指南
| Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003
|
| DIN CEN/TS 14578-2003
| 給水或排水排污用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).安裝的推薦性實施規
| Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003
|
| DIN CEN/TS 14807-2005
| 塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).地下GRP-UP管道的結構分析指南
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004
|
| DIN CEN/TS 1555-7-2003
| 燃?xì)廨斔陀盟芰瞎艿老到y(tǒng).聚乙烯(PE).第7部分:符合性評定指南
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 1555-7:2003
|
| DIN CEN/TS 1852-3-2005
| 無壓力地下排水和排污塑料管道系統.聚丙烯(PP).第3部分:安裝指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation; German version CEN/TS 1852-3:2003 + A1:2005
|
| DIN EN 10226-1-2004
| 有壓力緊固連接件的管道螺紋.第1部分:錐形外螺紋和平行內螺紋.尺寸、公差和名稱與符號
| Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
|
| DIN EN 10284-2000
| 聚乙烯(PE)管道系統用帶壓縮端的可鍛鑄鐵管件
| Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
|
| DIN EN 10289-2004
| 岸上和海上管道用鋼管和配件.外部液體用環氧和改良環氧覆層
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002
|
| DIN EN 10290-2004
| 岸上和海上管道用鋼管和配件.外部液體應用聚氨酯和改良聚氨酯覆層
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002
|
| DIN EN 10301-2004
| 海上和近海管道用鋼管和配件.降低無腐蝕氣體運輸摩擦的內涂層
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003
|
| DIN EN 10310-2004
| 近海和海上管道用鋼管和配件.內外部聚酰胺粉末基涂層
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003
|
| DIN EN 10329-2006
| 岸上和海上管道用鋼管和配件.外部連接涂層;德文版本EN 10329-2006
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings; German version EN 10329:2006
|
| DIN EN 1053-1995
| 塑料管道系統.非承壓熱塑管道系統.防水性試驗方法
| Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995
|
| DIN EN 1054-1995
| 塑料管道系統.建筑物排污熱塑管道系統.連接件氣密性試驗方法
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints; German version EN 1054:1995
|
| DIN EN 1055-1996
| 塑料管道系統.建筑物排水排污熱塑制管道系統.耐溫度循環試驗方法
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling; German version EN 1055:1996
|
| DIN EN 1092-1-2002
| 法蘭及其連接件.管道、閥門、配件和附件用圓形法蘭.第1部分:用PN標注的鋼制法蘭; 德文版本 EN 1092-1:2001
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated; German version EN 1092-1:2001
|
| DIN EN 1092-3-2004
| 法蘭及其連接件.PN標注的管道、閥門、配件和附件用圓形法蘭.第3部分:銅合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
|
| DIN EN 1092-4-2002
| 法蘭及其連接件.按PN標志的管道、閥門、配件和附件用圓形法蘭.第4部分:鋁合金法蘭; 德文版本 EN 1092-4:200
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
|
| DIN EN 1093-7-1998
| 機械的安全性.對漂浮在空氣中的有害物質排放的評估.第7部分:管道出口中物質的分離效率
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet; German version EN 1093-7:1998
|
| DIN EN 1119-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.密封性和耐柔性連接和鉸鏈連接磨損能力試驗方法
| Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996
|
| DIN EN 1120-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.彎曲狀態下管道內壁抗化學腐蝕能力測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996
|
| DIN EN 1123-2-1999
| 帶插接套管廢水管道.縱向焊縫熱鍍鋅鋼管道和管件.第2部分:尺寸
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999
|
| DIN EN 1123-3-2005
| 廢水系統用帶插接套的長焊縫焊接熱浸鍍鋅鋼管制管道和管件.第3部分:真空排水系統和船上排水系統的尺寸和特
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
|
| DIN EN 1124-2-1999
| 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第2部分:S系統.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999
|
| DIN EN 1124-3-1999
| 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第3部分:X系統.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999
|
| DIN EN 12007-1-2000
| 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第1部分:一般功能推薦規范
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations; German version EN 12007-1:2000
|
| DIN EN 12007-2-2000
| 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第2部分:聚乙烯管專用功能推薦規范(最大使用壓力小于等于10
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000
|
| DIN EN 12007-3-2000
| 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第3部分:鋼專用功能推薦規范
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000
|
| DIN EN 12007-4-2000
| 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第4部分:修復管道的專用功能推薦規范
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation; German version EN 12007-4:2000
|
| DIN EN 12056-2-2001
| 建筑物內重力排水系統.第2部分:衛生管道的布局和計算
| Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000
|
| DIN EN 12061-1999
| 塑料管道系統.熱塑管接頭.耐沖擊性能試驗方法
| Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999
|
| DIN EN 12068-1999
| 陰極防護.帶陰極防護裝置敷設在土壤和水中的鋼管管道防腐用有機包封.帶材和收縮材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials; German version EN 12068:1998
|
| DIN EN 12095-1997
| 塑料管道系統.雨水管道系統卡圈.卡圈強度試驗方法
| Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength; German version EN 12095:1997
|
| DIN EN 12099-1997
| 塑料管道系統.聚乙烯管道材料和部件.揮發物含量測定
| Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997
|
| DIN EN 12100-1997
| 塑料管道系統.聚乙烯(PE)閥.三點負載抗彎曲試驗方法
| Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
|
| DIN EN 12106-1997
| 塑料管道系統.聚乙烯管道.擠壓后耐內壓試驗方法
| Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
|
| DIN EN 12107-1997
| 塑料管道系統.注塑熱塑性塑料配件、閥門和附件.注塑熱塑材料管件持久靜液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
|
| DIN EN 12117-1997
| 塑料管道系統.配件、閥門和附件.氣流和壓降關系的測定
| Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997
|
| DIN EN 12118-1997
| 塑料管道系統.電量分析法測定熱塑性塑料含水量
| Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
|
| DIN EN 12119-1997
| 塑料管道系統.聚乙烯(PE)管.耐溫度循環試驗方法
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling; German version EN 12119:1997
|
| DIN EN 12200-1-2001
| 地上露天用塑料雨水管道系統.未增塑聚氯乙烯.第1部分:管、管件和管道系統規范
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000
|
| DIN EN 12201-1-2003
| 供水用塑料管道系統.聚乙烯.第1部分:總則
| Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General; German version EN 12201-1:2003
|
| DIN EN 12201-2-2003
| 供水用塑料管道系統.聚乙烯.第2部分:管道
| Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes; German version EN 12201-2:2003
|
| DIN EN 12201-3-2003
| 供水用塑料管道系統.聚乙烯.第3部分:管件
| Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003
|
| DIN EN 12201-5-2003
| 供水用塑料管道系統.聚乙烯.第5部分:系統使用的適合性
| Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 12201-5:2003
|
| DIN EN 12220-1998
| 建筑物內通風.空氣管道.一般通風用圓形法蘭尺寸
| Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1998
|
| DIN EN 12236-2002
| 建筑物通風.管道懸吊裝置和支撐物.強度要求
| Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; German version EN 12236:2002
|
| DIN EN 12237-2003
| 建筑物的通風.管道作業.圓形薄金屬板管道的強度和泄漏
| Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts; German version EN 12237:2003
|
| DIN EN 1225-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.潮濕蠕變系數測定和長時期規定圓度穩定性計算
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996
|
| DIN EN 12256-1998
| 塑料管道系統.熱塑管接件.已組裝管接件的機械強度或柔性的測試方法
| Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998
|
| DIN EN 1226-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.耐初始圓度變形驗證方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection; German version EN 1226:1996
|
| DIN EN 1227-1998
| 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).測定潮濕條件下環形件持久變形性
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997
|
| DIN EN 12279-2005
| 燃?xì)夤?yīng)系統.動力管道上的氣壓調節裝置.功能要求
| Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements; German version EN 12279:2000 + A1:2005
|
| DIN EN 1228-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.初始規定圓度穩定性測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
|
| DIN EN 1229-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.管壁短期內壓密封性驗證試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
|
| DIN EN 12293-1999
| 塑料管道系統.冷、熱水用熱塑性塑料管道和管件.檢驗已安裝的組件耐溫度循環的試驗方法
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
|
| DIN EN 12294-1999
| 塑料管道系統.熱水和冷水系統.真空密封性的檢驗方法
| Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
|
| DIN EN 12295-1999
| 塑料管道系統.熱水和冷水用熱塑性塑料管和相關管件.管接頭耐循環壓力的檢測方法
| Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
|
| DIN EN 12308-1998
| 液體天然氣設施和設備.液體天然氣管道使用的法蘭連接件的密封墊片的適用性試驗
| Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
|
| DIN EN 12474-2001
| 海底管道的陰極防護
| Cathodic protection for submarine pipelines; German version EN 12474:2001
|
| DIN EN 12514-2-2000
| 油燃燒器供油系統的安裝.第1部分:安全要求和試驗.部件,閥門管道,過濾器,油氣分離器,油量計
| Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000
|
| DIN EN 12585-1999
| 玻璃裝置,管道和管連接件.DN 15至DN 1000的管道和管連接件.匹配性和可互換性
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1000 - Compatibility and interchangeability; German version EN 12585:1998
|
| DIN EN 12629-5-1-2004
| 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-1部分:垂直軸的管道制造機械
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003
|
| DIN EN 12629-5-2-2004
| 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-2部分:水平軸的管道制造機械
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003
|
| DIN EN 12629-5-3-2004
| 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-3部分:管道預加應力機械
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003
|
| DIN EN 12629-5-4-2004
| 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-4部分:混凝土管道涂層機械
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003
|
| DIN EN 12666-1-2006
| 無壓地下排水和排污塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統規范.德文版本EN 12666-1-2005
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005
|
| DIN EN 12735-1-2005
| 銅和銅合金.空氣調節和制冷用無縫圓形銅管.第1部分:管道系統用管
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems; German version EN 12735-1:2001 + A1:2005
|
| DIN EN 12763-2000
| 建筑物排水系統纖維水泥管道和配件.尺寸和交貨技術條件
| Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000
|
| DIN EN 1277-2004
| 塑料管道系統.用于地下無壓裝置的熱塑性管道系統.橡膠密封環連接件密封性的檢驗方法
| Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
|
| DIN EN 12842-2000
| PVC-U或PE管道系統用球墨鑄鐵管件.要求和試驗方法
| Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
|
| DIN EN 1293-1999
| 氣動壓力排水管道構件一般要求
| General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999
|
| DIN EN 1295-1-1997
| 各種負荷條件下地下管道結構設計.第1部分:一般要求
| Structural design of buried pipelines under various conditions of loading - Part 1: General requirements; German version EN 1295-1:1997
|
| DIN EN 13052-1-2001
| 有機物對飲用水的影響.有機物質.管道系統中水的顏色和濁度測定.第1部分:試驗方法
| Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; German version EN 13052-1:2001
|
| DIN EN 13090-2001
| 建筑物燃?xì)夤艿缆菁y接頭再密封方法
| Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000
|
| DIN EN 13136-2005
| 制冷系統和熱泵.釋壓裝置和相關管道.計算方法
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001 + A1:2005
|
| DIN EN 13220-1999
| 與醫用氣體管道系統的終端裝置相連接的流量測量設備
| Flow-metering devices for connection to terminal units of medical gas pipeline systems; German version EN 13220:1998
|
| DIN EN 13244-1-2003
| 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第1部分:總則
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General; German version EN 13244-1:2002
|
| DIN EN 13244-2-2003
| 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第2部分:管道
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes; German version EN 13244-2:2002
|
| DIN EN 13244-3-2003
| 地下和地上通用壓力排水排污系統的塑料管道系統.聚乙烯(PE).第3部分:配件
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings; German version EN 13244-3:2002
|
| DIN EN 13244-4-2003
| 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第4部分:閥門
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002
|
| DIN EN 13244-5-2003
| 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第5部分:系統適用性
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 13244-5:2002
|
| DIN EN 1329-1-1999
| 建筑物污物和污水排放(低溫和高溫)用塑料管道系統.未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系統規范;
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999
|
| DIN EN 13403-2003
| 建筑物通風.非金屬管.絕緣板制管道
| Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards; German version EN 13403:2003
|
| DIN EN 13480 Bb.1-2002
| 金屬工業用管道.第7部分;一致性評估程序使用指南; 德文版本 CEN/TR 13480-7:2002
| Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures; German version CEN/TR 13480-7:2002
|
| DIN EN 13480-1 Berichtigung 1-2005
| 金屬工業管道.第1部分:總則.德文版本 EN 13480-1-2002，對DIN EN 13480-1-2002的勘誤
| Metallic industrial piping - Part 1: General; German version EN 13480-1:2002, Corrigenda to DIN EN 13480-1:2002-08
|
| DIN EN 13480-1-2002
| 金屬工業用管道.第1部分;總則; 德文版本 EN 13480-1:2002
| Metallic industrial piping - Part 1: General; German version EN 13480-1:2002
|
| DIN EN 13480-1/A1-2005
| 金屬工業用管道.第1部分.總則
| Metallic industrial piping - Part 1: General; German version EN 13480-1:2002/A1:2005
|
| DIN EN 13480-2 Berichtigung 1-2006
| 金屬工業用管道.第2部分:材料
| Metallic industrial piping - Part 2 : Materials; German version EN 13480-2:2002, Corrigenda 1 to DIN EN 13480-2:2002-08
|
| DIN EN 13480-2-2002
| 金屬工業用管道.第2部分;材料; 德文版本 EN 13480-2:2002
| Metallic industrial piping - Part 2 : Materials; German version EN 13480-2:2002
|
| DIN EN 13480-3 Berichtigung 1-2005
| 金屬工業用管道.第3部分：設計和計算；德文版本 EN 13480-3-2002.對DIN EN 13480-3-2002 的勘誤
| Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda to DIN EN 13480-3:2002-08
|
| DIN EN 13480-3 Berichtigung 2-2006
| 金屬工業用管道.第3部分:計算和設計
| Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda 2 to DIN EN 13480-3:2002-08
|
| DIN EN 13480-3-2002
| 金屬工業用管道.第3部分;計算和設計; 德文版本 EN 13480-3:2002
| Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002
|
| DIN EN 13480-3/A1-2005
| 金屬工業用管道.第3部分:設計和計算
| Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002/A1:2005
|
| DIN EN 13480-4 Berichtigung 1-2006
| 金屬工業用管道.第4部分:生產和設備
| Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002, Corrigenda 1 to DIN EN 13480-4:2002-08
|
| DIN EN 13480-4-2002
| 金屬工業用管道.第4部分;生產和安裝; 德文版本 EN 13480-4:2002
| Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002
|
| DIN EN 13480-5 Berichtigung 1-2006
| 金屬工業用管道.第5部分:檢驗和測試
| Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002, Corrigenda 1 to DIN EN 13480-5:2002-08
|
| DIN EN 13480-5-2002
| 金屬工業用管道.第5部分;檢驗和測試; 德文版本 EN 13480-5:2002
| Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002
|
| DIN EN 13480-6-2004
| 金屬工業管道.第6部分:埋管的額外要求
| Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2004
|
| DIN EN 13480-6/A1-2006
| 金屬工業管道.第6部分:埋管的額外要求.德文版本EN 13480-6-2004/A1-2005
| Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2004/A1:2005
|
| DIN EN 13566-1-2003
| 地下非承壓排水排污網翻新用塑料管道系統.第1部分:總則
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General; German version EN 13566-1:2002
|
| DIN EN 13566-2-2006
| 地下非壓力排水排污網翻新用塑料管道系統.第2部分:連續管加襯.德文版本 EN 13566-2-2005
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes; German version EN 13566-2:2005
|
| DIN EN 13566-3-2003
| 地下非承壓排水排污網翻新用塑料管道系統.第3部分:緊配合管加襯
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes; German version EN 13566-3:2002
|
| DIN EN 13566-4-2003
| 地下非壓力排水排污網翻新用塑料管道系統.第4部分:硫化管加襯
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes; German version EN 13566-4:2002
|
| DIN EN 13598-1-2003
| 無壓力地下排水和排污用塑料管道系統.非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括淺層檢
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers; German version EN 13598-1:2003
|
| DIN EN 13636-2004
| 地下金屬罐和相關管道的陰極保護
| Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
|
| DIN EN 1366-1-1999
| 服務設施防火試驗.第1部分:管道
| Fire resistance tests on service installations - Part 1: Ducts; German version EN 1366-1:1999
|
| DIN EN 1366-8-2004
| 服務設施的防火檢驗.第8部分:排煙管道
| Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004
|
| DIN EN 13689-2003
| 翻新塑料管道系統分類和設計指南
| Guidance on the classification and design of plastics piping systems used for renovation; German version EN 13689:2002
|
| DIN EN 1393-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料管(GFK).初始縱向拉伸性能測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
|
| DIN EN 1394-1996
| 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).切線方向表面管頭拉伸性能測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
|
| DIN EN 13942-2005
| 石油和天然氣工業.管道輸送系統.管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
|
| DIN EN 1401-1-1998
| 非壓力地下排水和污水用塑料管道系統.硬聚氯乙烯(PVC-V).第1部分:管、管件和系統規范
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
|
| DIN EN 1411-1996
| 塑料管和管道系統.熱塑塑料管.梯級法測定抗外沖擊應力能力
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996
|
| DIN EN 14114-2002
| 建筑設備和工業設施的濕熱性能.水蒸汽擴散計算.制冷管道絕緣系統; 德文版本 EN 14114:2002
| Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002
|
| DIN EN 14125-2005
| 加油站的地下裝置用熱塑性和柔性金屬管道
| Thermoplastic and flexible metal pipework for underground installation at petrol filling stations; German version EN 14125:2004
|
| DIN EN 14141-2004
| 天然氣輸送管道用閥門.性能要求和試驗
| Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003
|
| DIN EN 14161-2004
| 石油和天然氣工業.管道傳輸系統
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003
|
| DIN EN 14163-2002
| 石油工業和天然氣工業.管道輸送系統.管路焊接 (ISO 13847:2000, 修訂版); 德文版本 EN 14163:2001、德文和
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English
|
| DIN EN 1420-1-1999
| 有機物對飲用水的影響.管道系統中水氣味和味道測定
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method; German version EN 1420-1:1999
|
| DIN EN 14239-2004
| 建筑物通風.管道系統.管道系統表面積的測量
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004
|
| DIN EN 14364-2006
| 壓力和無壓力排水和排污塑料管道系統.基于不飽和聚酯樹脂的玻璃增強熱固性塑料(GRP)系統.管件、配件和連接
| Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006
|
| DIN EN 1437-2002
| 塑料管道系統.地下排水排污用管道系統.抗混合溫度循環和外加負荷的試驗方法; 德文版本 EN 1437:2002
| Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading; German version EN 1437:2002
|
| DIN EN 14408-1-2004
| 地下氣體供給網絡的翻修用塑料管道系統.第1部分:總則
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General; German version EN 14408-1:2004
|
| DIN EN 14408-3-2004
| 地下氣體供給網絡的翻修用塑料管道設備.第3部分:緊配合管道襯
| Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes; German version EN 14408-3:2004
|
| DIN EN 14409-1-2004
| 地下水供給網絡的翻新用塑料管道設備.第1部分:總則
| Plastics piping systems for renovation of underground water supply networks - Part 1: General; German version EN 14409-1:2004
|
| DIN EN 14409-3-2004
| 地下水供給網絡的翻新用塑料管道設備.第3部分:緊配合管道襯
| Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes; German version EN 14409-3:2004
|
| DIN EN 14419-2004
| 區域供暖管.直埋式熱水供應網用預絕緣粘合管道系統.監視系統
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German version EN 14419:2003
|
| DIN EN 1446-1996
| 塑料管及管道系統.熱塑管.環形撓性測定
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility; German version EN 1446:1996
|
| DIN EN 1447-1996
| 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).內壓耐久性能測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longterm resistance to internal pressure; German version EN 1447:1996
|
| DIN EN 1448-1997
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.抗拉套管和頂尖與彈性體密封件連接的結構類型檢驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996
|
| DIN EN 1449-1997
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.已粘接套管和頂尖連接件結構類型檢驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of a cemented socket- and -spigot joints; German version EN 1449:1996
|
| DIN EN 1450-1999
| 塑料管道系統.玻璃纖維增強的熱固塑料部件(GFK).對采用螺栓固定的法蘭連接點的設計進行驗證的試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998
|
| DIN EN 1451-1-1999
| 建筑物結構體中的廢水和污物排放系統用塑料管道系統(低溫和高溫).聚丙烯(PP).第1部分:管、管接頭和管道系統
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998
|
| DIN EN 1452-1-1999
| 供水用塑料管道系統.無增塑聚氯乙烯(PVC-U).第1部分:概述
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General; German version EN 1452-1:1999
|
| DIN EN 1452-2-1999
| 供水用塑料管道系統.無增塑聚氯乙烯(PVC-U).第2部分:管
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes; German version EN 1452-2:1999
|
| DIN EN 1452-3-1999
| 供水用塑料管道系統.無增塑聚氯乙烯(PVC-U).第3部分:管件
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999
|
| DIN EN 1452-4-1999
| 供水用塑料管道系統.未增塑聚氯乙烯.第4部分:閥門和輔助設備
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment; German version EN 1452-4:1999
|
| DIN EN 1452-5-1999
| 供水用塑料管道系統.無增塑聚氯乙烯(PVC-U).第5部分:系統使用的適用性
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system; German version EN 1452-5:1999
|
| DIN EN 14525-2005
| 不同材料(球墨鑄鐵、灰鑄鐵、鋼、PVC-U、PE和纖維水泥)管道用球墨鑄鐵大公差聯接器和法蘭接頭
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004
|
| DIN EN 1453-1-2000
| 建筑物內污物和廢物排出(高溫和低溫)用承重墻管的塑料管道系統. 硬氯乙烯管(PVC-U).第1部分:管道和系統規范
| Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2000
|
| DIN EN 1455-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
|
| DIN EN 1456-1-2001
| 地下和地上排水和排污塑料壓力管道系統.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系統規范
| Plastics piping systems for buried and above ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; German version EN 1456-1:2000
|
| DIN EN 14741-2006
| 熱塑管和管道系統.地下非壓力設施用接頭.通過評估密封壓力測定彈性密封件接頭的長期密封性能的試驗方法
| Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure; German version EN 14741:2006
|
| DIN EN 14758-1-2006
| 無壓地下排水和污水塑料管道系統.有礦物調節劑的聚丙烯(PP-MD)管道系統.第1部分:管、管件和系統規范.德文版
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
|
| DIN EN 14790-2006
| 固定源排放.管道中水蒸氣含量測定
| Stationary source emissions - Determination of the water vapour in ducts; German version EN 14790:2005
|
| DIN EN 14802-2006
| 塑料管道系統.監測室和人孔用熱塑性豎井.測定耐路表面和交通載荷能力.德文版本EN 14802-2005
| Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading; German version EN 14802:2005
|
| DIN EN 14870-1-2005
| 石油和天然氣工業.管道輸送系統用進氣彎頭、管件和法蘭.第1部分:進氣彎頭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
|
| DIN EN 14870-2-2005
| 石油和天然氣工業.管道輸送系統用進氣彎管、管件和法蘭.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
|
| DIN EN 14870-3-2006
| 石油和天然氣工業.管道輸送系統用進氣彎管、配件和法蘭.第3部分:法蘭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006
|
| DIN EN 1505-1998
| 建筑物通風.矩形截面薄板制通風管道和異型件.尺寸
| Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross-section - Dimensions; German version EN 1505:1997
|
| DIN EN 1506-1998
| 建筑物通風.圓形截面薄板制通風管道和異型件.尺寸
| Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions; German version EN 1506:1997
|
| DIN EN 1519-1-2000
| 建筑結構中排污(低溫和高溫)用塑料管道系統.聚乙烯(PE).第1部分:管、管件和系統的規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
|
| DIN EN 1555-1-2003
| 氣體燃料塑料管道供氣系統.聚乙烯(PE).第1部分:總則
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2002
|
| DIN EN 1555-2-2003
| 氣體燃料塑料管道供氣系統.聚乙烯(PE).第2部分:管道
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes; German version EN 1555-2:2002
|
| DIN EN 1555-3-2005
| 氣體燃料供應用塑料管道系統.聚乙烯(PE).第3部分:配件
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2002 + A1:2005
|
| DIN EN 1555-4-2003
| 氣體燃料塑料管道供氣系統.聚乙烯(PE).第4部分:閥門
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002
|
| DIN EN 1555-5-2003
| 氣體燃料塑料管道供氣系統.聚乙烯(PE).第5部分:系統的適用性
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 1555-5:2002
|
| DIN EN 1565-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.苯乙烯共聚摻混料(SAN+PVC).第1部分:管道、管件和系
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998
|
| DIN EN 1566-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
|
| DIN EN 1594-2000
| 供氣系統.最大工作壓力大于16巴的管道.功能要求
| Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000
|
| DIN EN 1610 Bb.1-1997
| 排水和污水管道的鋪設和檢驗.相關標準和規范的目錄
| Construction and testing of drains and sewers - List of relevant standards and guidelines (status as of 1997-02)
|
| DIN EN 1610-1997
| 下水管道的鋪設和檢驗
| Construction and testing of drains and sewers; German version EN 1610:1997
|
| DIN EN 1638-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管.圓筒內壓循環作用試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997
|
| DIN EN 1680-1997
| 塑料管道系統.聚乙烯(PE)管道系統用閥門.操作機構彎曲時和彎曲后密封性試驗方法
| Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
|
| DIN EN 1704-1997
| 塑料管道系統.熱塑管道系統用閥門.彎曲加溫度循環后閥門完好性測試方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
|
| DIN EN 1705-1997
| 塑料管道系統.熱塑閥門.外部沖擊后閥門完好性試驗方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
|
| DIN EN 1716-1997
| 塑料管道系統.聚乙烯(PE)開孔三通.安裝就位的開孔三通抗沖擊應力試驗方法
| Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an asssembled tapping tee; German version EN 1716:1997
|
| DIN EN 1775-2001
| 供氣.建筑物煤氣管道工程.最大允許工作壓力≤5巴.功能推薦標準
| Gas supply - Gas pipework for buildings - Maximum operating pressure 5 bar; Functional recommendations (includes Amendment A1:2000 and Amendment A2:2000); German version EN 1775:1998 + A1:2000 + A2:2000
|
| DIN EN 1796-2006
| 有或無壓力水供應塑料管道系統.基于不飽和聚酯(UP)的玻璃增強熱硬塑料(GRP)
| Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2006
|
| DIN EN 1852-1-2003
| 無壓地下排水和污水塑料管道系統.聚丙烯(PP).第1部分:管、配件和系統規范
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002); German version EN 1852-1:1997 + A1:2002
|
| DIN EN 1861-1998
| 制冷設備和熱泵.系統流程圖和管道流程及儀器流程圖.結構布局和符號
| Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols; German version EN 1861:1998
|
| DIN EN 1862-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料管(GFK).在化學環境下存放后相對蠕變系數的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997
|
| DIN EN 187105-2002
| 單膜式光纖電纜(管道/直埋安裝); 德文版本 EN 187105:2002
| Single mode optical cable (duct/direct buried installation); German version EN 187105:2002
|
| DIN EN 1905-1999
| 塑料管道系統.未增塑的聚氯乙烯(PVC-V)管材、管連接件和材料.根據氯總含量評定聚氯乙烯含量的方法
| Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998
|
| DIN EN 1971-1998
| 銅和銅合金.管道的渦流檢驗
| Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998
|
| DIN EN 1979-1999
| 塑料管道和導管系統.熱塑性螺旋成形的結構壁管材.接縫抗拉強度的測定
| Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
|
| DIN EN 2258-1997
| 航空和航天.鋁和鋁合金制圓形管道.直徑3.2mm=<100mm,壁厚0.6mm=<2.5mm.尺寸
| Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997
|
| DIN EN 24006-1993
| 封閉管道液流量測量.術語符號
| Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993
|
| DIN EN 253-2006
| 區域供暖管道.直埋式供熱網絡用預隔熱粘結管系統.鋼制接用戶管系的管組件.聚氨脂保溫層和聚乙烯外護套。德
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003 + A1:2005
|
| DIN EN 2656-2002
| 航空航天系列.管道連接件.焊接連接端頭.幾何圖形; 德文版本 EN 2656:2001
| Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001
|
| DIN EN 288-9-1999
| 金屬材料焊接程序的規范和批準.第9部分:陸地和近海輸送管道現場對接的管道焊接程序的試驗
| Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999
|
| DIN EN 295-10-2005
| 排水和污水管道用陶土管、配件及管連接件.第10部分:性能要求
| Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements; German version EN 295-10:2005
|
| DIN EN 448-2003
| 區域供暖管道.直埋式熱水供應網預隔熱連接管道系統.聚氨酯絕熱和聚乙烯外覆層鋼管成套配件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2003
|
| DIN EN 4550-1-2004
| 航空航天系列.管道連接件37設計構造.英尺系列.第1部分:球形陽螺紋焊接端
| Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003
|
| DIN EN 4550-2-2004
| 航空航天系列.管道連接件37設計構造.英制.第2部分:端口
| Aerospace series - Pipe coupling 37° - Design confirguration - Inch series - Part 2: Port ends; German and English version EN 4550-2:2003
|
| DIN EN 4550-3-2004
| 航空航天系列.管道連接件37設計構造.英制.第3部分:端口接頭
| Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003
|
| DIN EN 4550-4-2004
| 航空航天系列.管道連接件37設計構造.英制.第4部分:承口密封端
| Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003
|
| DIN EN 4551-2004
| 航空航天系列.耐熱鋼制管道連接件37轉的螺套.英制系列
| Aerospace series - Pipe couplings, 37°, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2003
|
| DIN EN 45510-7-1-2000
| 發電廠設備和系統購置指南.第7-1部分:管道系統和閥.高壓管道系統
| Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999
|
| DIN EN 45510-7-2-2000
| 發電廠設備和系統購置指南.第7-2部分:管道系統和閥.鍋爐和高壓管路閥門
| Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999
|
| DIN EN 476-1997
| 自流雨水和污水管道構件通用要求
| General requirements for components used in discharge pipes, drains and sewers for gravity systems; German version EN 476:1997
|
| DIN EN 488-2003
| 區域供暖管道.直埋式熱水供應網預隔熱連接管道系統.聚氨酯絕熱和聚乙烯外覆層鋼管鋼閥門組件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
|
| DIN EN 489-2003
| 區域供暖管道.直埋式熱水供應網預隔熱連接管道系統.聚氨酯絕熱和聚乙烯外覆層鋼管接頭組件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 489:2003
|
| DIN EN 50085-1-2006
| 電氣設備用電纜中繼系統和電纜管道系統.第1部分:一般要求
| Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; German version EN 50085-1:2005
|
| DIN EN 50085-2-3-1999
| 電氣設備用電纜中繼系統和電纜管道系統.配電室設備用有槽電纜管道系統特殊要求
| Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets; German version EN 50085-2-3:1999
|
| DIN EN 50249-2003
| 地下管道和電纜電磁波監測器.性能和安全性
| Electromagnetic locators for buried pipes and cables - Performance and safety; German version EN 50249:2002
|
| DIN EN 50406-2-2005
| 高比特率電信網絡用終端用戶多組電纜.第2部分:管道電纜和地下電纜
| End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables; German version EN 50406-2:2004
|
| DIN EN 512/A1-2002
| 纖維水泥制品.壓力管道和接頭.修改件A1:2001; 德文版本 EN 512:1994/A1:2001
| Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001
|
| DIN EN 545-2002
| 水管路用延性鑄鐵管道、配件、附件及其接頭.要求和試驗方法; 德文版本 EN 545:2002
| Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002
|
| DIN EN 558-1-1995
| 工業閥門.帶法蘭管道中的金屬閥門面-面尺寸和面-中心尺寸.第1部分:按PN標識的閥門
| Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995
|
| DIN EN 558-2-1995
| 工業閥門.帶法蘭管道中的金屬閥門面-面尺寸和面-中心尺寸.第2部分:按級別標識的閥門
| Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995
|
| DIN EN 579-1993
| 塑料管道系統.網狀交聯聚乙烯管.溶劑提取法測定聚合度
| Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction; German version EN 579:1993
|
| DIN EN 580-2003
| 塑料管道系統.未增塑聚氯乙烯管.規定溫度下抗二氯四甲烷的檢驗方法
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT); German version EN 580:2003
|
| DIN EN 60794-3-10-2003
| 光纜.第3-10部分:戶外電纜.管道光纜和直埋通信光纜的系列規范 (IEC 60794-3-10:2002、修訂版); 德文版本 EN
| Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified); German version EN 60794-3-10:2002
|
| DIN EN 637-1994
| 塑料管道系統.玻璃纖維增強塑料部件.用重力測量法對成分含量的測定; 德文版本 EN 637:1994
| Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994
|
| DIN EN 705-1994
| 塑料管道系統.玻璃纖維增強熱固塑料管和管件.回歸分析和應用方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
|
| DIN EN 712-1994
| 熱塑塑料管道系統.壓力管和管接頭之間承載端部的機械連接.恒定縱向作用力下抗拉出力的試驗方法
| Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993
|
| DIN EN 713-1994
| 塑料管道系統.管接頭和聚烯烴壓力管間的機械連接.在內壓和彎曲下密封性的試驗方法
| Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
|
| DIN EN 714-1994
| 熱塑管道系統.壓力管道和模壓管件之間無末端承載的橡膠密封圈連接件.無端部拉力的流體靜力內壓力下的密封性
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
|
| DIN EN 715-1994
| 熱塑塑料管道系統.小直徑壓力管和管接頭之間承載端部的連接.在水內壓力下（包括端頭推力）密封試驗方法
| Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994
|
| DIN EN 727-1995
| 塑料管道和管道輸送系統.熱塑塑料管和管件.維卡軟化溫度(VST)的測定; 德文版本 EN 727:1994
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
|
| DIN EN 728-1997
| 塑料管和管道系統.聚烯烴管和接頭.氧化感應時間測定
| Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997
|
| DIN EN 737-1-1998
| 醫療氣體管道系統.第1部分:醫療壓縮氣體和真空的管端裝置
| Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998
|
| DIN EN 737-2-2000
| 醫療氣體管道系統.第2部分:麻醉氣清除系統.基本要求(包括修改件A1)
| Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems; basic requirements (includes Amendment A1:1999); German version EN 737-2:1998 + A1:1999
|
| DIN EN 737-4-1998
| 醫療氣體管道系統.第4部分:麻醉氣體凈化系統用管端裝置
| Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems; German version EN 737-4:1998
|
| DIN EN 744-1995
| 塑料管道和管道輸送系統.熱塑塑料管.用晝夜連續法的抗內爆的試驗方法; 德文版本 EN 744:1995
| Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995
|
| DIN EN 761-1994
| 塑料管道系統.玻璃增強熱固性管.干燥條件蠕變系數測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994
|
| DIN EN 773-1999
| 液壓排水管道構件一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999
|
| DIN EN 802-1994
| 塑料管道和管道輸送系統.壓力管道系統用噴鑄熱塑管件.壓碎造成最大變形的試驗方法; 德文版本 EN 802:1994
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
|
| DIN EN 803-1994
| 塑料管道系統.壓力管道用橡膠密封圈連接件的熱塑噴鑄管件.無端部拉力的抗瞬時內壓的試驗方法; 德文版本 EN
| Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
|
| DIN EN 804-1994
| 塑料管道系統.壓力管道用帶膠粘套管連接件的熱塑噴鑄管件.抗流體靜力瞬時內壓能力的試驗方法; 德文版本 EN
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
|
| DIN EN 877-2000
| 建筑物排水用鑄鐵管道、管件及其接頭和附件.要求、試驗方法和質量保證
| Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
|
| DIN EN 911-1995
| 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭的連接.外部靜力液壓條件下的防漏試驗方法;
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
|
| DIN EN 917-1997
| 塑料管道系統.熱塑閥門.耐內壓和密封性試驗方法
| Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
|
| DIN EN 922-1995
| 塑料管道和管道輸送系統.未增塑聚氯乙烯管和管件.測定粘度數值和K值計算用試樣制備; 德文版本 EN 922:1994
| Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994
|
| DIN EN 969-1995
| 燃?xì)夤艿烙们蚰T鐵管、管件、附件及其接頭.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
|
| DIN EN ISO 10380-2003
| 管道系統.波紋狀金屬軟管和軟管組件
| Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003
|
| DIN EN ISO 10806-2004
| 管道工程.波紋狀金屬軟管用配件
| Pipework - Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003
|
| DIN EN ISO 10807-1997
| 管道工程.爆燃性空氣電纜保護用波紋金屬軟管組件
| Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996
|
| DIN EN ISO 10931-2006
| 工業用塑料管道系統.聚偏氟乙烯(PVDF).元件和系統的規范.德文版本EN ISO 10931:2005
| Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005); German version EN ISO 10931:2005
|
| DIN EN ISO 11691-1996
| 聲學.無氣流管道消聲器插入損失測量.實驗室測量法
| Acoustics - Determination of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:1995
|
| DIN EN ISO 12162-1996
| 壓力管道用熱塑性材料.分類.材料牌號和計算
| Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995
|
| DIN EN ISO 13680-2002
| 石油工業和天然氣工業.用作套管、鋪設管道和連接器材的耐腐蝕合金無縫管.技術交貨條件 (ISO 13680:2000);
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001
|
| DIN EN ISO 13703-2003
| 石油天然氣工業.海上作業平臺管道系統的設計和安裝
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002
|
| DIN EN ISO 13844-2000
| 塑料管道系統.用于硬聚氯乙烯(PVC-U)管道的彈性密封圈式承口連接件.負壓下密封試驗方法
| Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000
|
| DIN EN ISO 13845-2000
| 塑料管道系統.用于硬聚氯乙烯(PVC-U)管道的彈性密封圈式承口連接件.內壓下角度偏轉密封試驗方法
| Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO 13845:2000
|
| DIN EN ISO 13846-2001
| 塑料管道系統.熱塑承壓管用端部荷載軸承和無端部荷載軸承組件和連接件.測定水內壓長期密封性的試驗方法
| Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
|
| DIN EN ISO 14723-2003
| 石油和天然氣工業.管道輸送系統.海底管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
|
| DIN EN ISO 14726-1-2001
| 船舶和造船技術.管道系統色標.第1部分:主色和介質
| Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media (ISO 14726-1:1999); German version EN ISO 14726-1:2001
|
| DIN EN ISO 15465-2004
| 管道工程.帶繞金屬軟管和軟管配件
| Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004
|
| DIN EN ISO 15493-2003
| 工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元件
| Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2003); German version EN ISO 15493:2003
|
| DIN EN ISO 15494-2003
| 工業用塑料管道系統.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).元件和系統的規范.米制系列
| Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003
|
| DIN EN ISO 15749-2-2004
| 船舶和海上技術.船舶和海上建筑物的排水系統.第2部分:重力系統用衛生排水和排水管道
| Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004); German version EN ISO 15749-2:2004
|
| DIN EN ISO 15749-3-2004
| 船舶和海上技術.船舶和海上建筑物排水系統.第3部分:真空系統用衛生排水和排水管道
| Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004
|
| DIN EN ISO 15874-1-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).第1部分:總則
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003); German version EN ISO 15874-1:2003
|
| DIN EN ISO 15874-2-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).第2部分:管道
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003); German version EN ISO 15874-2:2003
|
| DIN EN ISO 15874-3-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).第3部分:配件
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003); German version EN ISO 15874-3:2003
|
| DIN EN ISO 15874-5-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).第5部分:系統的適應性
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003); German version EN ISO 15874-5:2003
|
| DIN EN ISO 15875-1-2004
| 冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第1部分:總則
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003); German version EN ISO 15875-1:2003
|
| DIN EN ISO 15875-2-2004
| 冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第2部分:管道
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003); German version EN ISO 15875-2:2003
|
| DIN EN ISO 15875-3-2004
| 冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第3部分:配件
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003); German version EN ISO 15875-3:2003
|
| DIN EN ISO 15875-5-2004
| 冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第5部分:系統的適應性
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003); German version EN ISO 15875-5:2003
|
| DIN EN ISO 15876-1-2004
| 冷熱水裝置用塑料管道設備.聚丁烯(PB).第1部分:總則
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003
|
| DIN EN ISO 15876-2-2004
| 冷熱水裝置用塑料管道設備.聚丁烯(PB).第2部分:管道
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003); German version EN ISO 15876-2:2003
|
| DIN EN ISO 15876-3-2004
| 冷熱水裝置用塑料管道設備.聚丁烯(PB).第3部分:配件
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003); German version EN ISO 15876-3:2003
|
| DIN EN ISO 15876-5-2004
| 冷熱水裝置用塑料管道設備.聚丁烯(PB).第5部分:系統的適應性
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003
|
| DIN EN ISO 15877-1-2004
| 冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第1部分:總則
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003); German version EN ISO 15877-1:2003
|
| DIN EN ISO 15877-2-2004
| 冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第2部分:管道
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003); German version EN ISO 15877-2:2003
|
| DIN EN ISO 15877-3-2004
| 冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第3部分:配件
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003); German version EN ISO 15877-3:2003
|
| DIN EN ISO 15877-5-2004
| 冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第5部分:系統的適應性
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003); German version EN ISO 15877-5:2003
|
| DIN EN ISO 15908-2003
| 塑料管道系統粘合劑.測定粘合劑熱穩定性的試驗方法
| Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
|
| DIN EN ISO 16871-2003
| 塑料管道系統.塑料管道和配件.自然風化法
| Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003
|
| DIN EN ISO 1746-2000
| 橡膠或塑料軟管和管道.彎曲試驗
| Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000
|
| DIN EN ISO 21329-2005
| 石油和天然氣工業.管道運輸系統.機械連接器的試驗過程
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004
|
| DIN EN ISO 3126-2005
| 塑料管道系統.塑料部件.尺寸測定
| Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
|
| DIN EN ISO 5136-2003
| 聲學.風機和其他風動設備輻射入管道中的聲功率的測定.管道法
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003); German version EN ISO 5136:2003
|
| DIN EN ISO 5167-1-2004
| 用園截面管道中插入的壓差裝置測量流體流量.第1部分:總體規則和要求
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003
|
| DIN EN ISO 5167-2-2004
| 用插入圓截面管道中的壓差裝置測量流體流量.第2部分:節流孔板
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003
|
| DIN EN ISO 5167-3-2004
| 用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003
|
| DIN EN ISO 5167-4-2004
| 用插入圓截面管道中的壓差裝置測量流體流量.第4部分:文杜利管
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003); German versions EN ISO 5167-4:2003
|
| DIN EN ISO 580-2005
| 塑料管和管道系統.噴射鑄造熱塑性配件.熱效應直觀評估法
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005); German version EN ISO 580:2005
|
| DIN EN ISO 6259-1-2002
| 熱塑管道.拉伸性能的測定.第1部分:通用試驗方法(ISO 6259-1:1997); 德文版本 EN ISO 6259-1:2001
| Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001
|
| DIN EN ISO 6817-1995
| 封閉管道中導電液體流量測量.電磁流率計測量法
| Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
|
| DIN EN ISO 7235-2004
| 聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失
| Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003
|
| DIN EN ISO 7369-2005
| 管道工程.金屬軟管和軟管組件.詞匯
| Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004
|
| DIN EN ISO 8316-1995
| 封閉管道內液體流量的測量.容積測量箱的液體收集法 (ISO 8316:1987); 德文版本 EN ISO 8316:1995
| Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995
|
| DIN EN ISO 8497-1996
| 絕熱.管道用絕熱穩態熱傳遞性能測定
| Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
|
| DIN EN ISO 8795-2001
| 人類生活用水的塑料輸水管道系統.偏移評定.塑料管、配件及其接頭偏移值測定
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001
|
| DIN EN ISO 9080-2003
| 塑料管道和導管系統.用外推法測定熱塑性塑料管材的長期靜液壓強度
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003
|
| DIN EN ISO 9311-1-2005
| 熱塑管道系統用膠粘劑.第1部分:膠粘膜特性的測定
| Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005); German version EN ISO 9311-1:2005
|
| DIN EN ISO 9311-2-2002
| 熱塑性塑料管道系統用粘合劑.第2部分:剪切強度的測定 (ISO 9311-2:2002); 德文版本 EN ISO 9311-2:2002
| Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002
|
| DIN EN ISO 9311-3-2005
| 熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法
| Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005
|
| DIN ISO 6412-1-1991
| 技術制圖.管道的簡明表示法.第1部分:一般規則和正交表示法; 等同采用 ISO 6412-1:1989
| Technical drawings; simplified representation of pipelines; general rules and orthogonal representation; identical with ISO 6412-1:1989
|
| DIN ISO 6412-2-1991
| 技術制圖.管道的簡明表示法.第2部分:等角投影; 等同采用 ISO 6412-2:1989
| Technical drawings; simplified representation of pipelines; isometric projection; identical with ISO 6412-2:1989
|
| DIN ISO 6412-3-1994
| 技術制圖.管道的簡化表示法.第3部分:通風和排水系統終端部件; 等同采用 ISO 6412-3:1993
| Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems; identical with ISO 6412-3:1993
|
| DIN ISO 6772-1996
| 航空航天.流體系統.液壓軟管、管道和連接組件的脈沖試驗 (ISO 6772:1988)
| Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
|
| DIN ISO 6773-1996
| 航空航天.流體系統.管道和配件的熱沖擊試驗 (ISO 6773:1994)
| Aerospace - Fluid systems - Thermal shock testing of piping and fittings (ISO 6773:1994)
|
| DIN ISO 8277-1989
| 船舶制造.信息處理.管道工程.信息傳輸
| Shipbuilding; information processing; pipework; information transfer; identical with ISO 8277:1988
|
| DIN ISO 8575-1998
| 航空航天.流體系統.液壓系統管道
| Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)
|
| DIN ISO 9368-1-1993
| 用稱重法測量封閉式管道中液體的流量.校核裝置的規程.靜態稱重系統
| Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; static weighing systems; identical with ISO 9368-1:1990
|
| DIN ISO/TS 15874-7-2004
| 冷熱水裝置用塑料管道設備.聚丙烯(PP).第7部分:合格評定指南
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003); German version CEN ISO/TS 15874-7:2003
|
| DIN ISO/TS 15875-7-2004
| 冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第7部分:合格評定指南
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003); German version CEN ISO/TS 15875-7:2003
|
| DIN ISO/TS 15876-7-2004
| 冷熱水裝置用塑料管道設備.聚丁烯(PB).第7部分:合格評定指南
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003); German version CEN ISO/TS 15876-7:2003
|
| DIN ISO/TS 15877-7-2004
| 冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第7部分:合格評定指南
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2003); German version CEN ISO/TS 15877-7:2003
|
| DIN V 16877-2002
| 電纜導管用聚丙烯管道和配件.尺寸和技術交貨條件
| Pipes and fittings of polypropylene (PP) for cable ducting - Dimensions and technical delivery conditions
|
| DIN V 16878-2002
| 埋設導管用聚丙烯管道和配件.尺寸和技術交貨條件
| Pipes and fittings of polypropylene (PP) for buried ducting - Dimensions and technical delivery conditions
|
| DIN V 4102-21-2002
| 建筑物材料和建筑物組件的防火性能.第21部分:通風管道防火性能的評估
| Fire behaviour of building materials and building components - Part 21: Assessment of the performance of fire resistant air ducts
|
| DIN V 54180-3-1997
| 無損檢測.剪切圖示.第3部分:管道檢測
| Non-destructive testing - Shearography - Part 3: Testing of pipelines
|
| DIN V 65900-14-1998
| 航空航天系列.液體或氣體條件下管道的設計和結構.設施的剛性管線
| Aerospace series - Design and construction of pipeline for fluids in liquid or Gaseous condition - Rigid lines, installation (AECMA Technical Report TR 2674:1997)
|
| DIN V 65900-6-1995
| 航空航天系列.鈦合金管道聯軸節、松動式法蘭和密封件.總裝建議 (AECMA 技術報告 TR 4053:1994)
| Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994)
|
| DIN V 65900-7-1995
| 航空航天系列.鈦合金60度球形管道聯軸節.總裝建議 (AECMA 技術報告 TR 4052:1995)
| Aerospace series - Pipe couplings 60 °, spherical, in titanium alloy - Assembly recommendations (AECMA Technical Report TR 4052:1995)
|
| DIN V 86002-2000
| 船舶和海上技術.管道設備用符合DIN和DIN EN標準的銅合金的比較
| Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment
|
| DIN V ENV 1046-2002
| 塑料管道系統.輸送水或污水用建筑結構外部系統.地上和地下安裝慣例
| Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground; German version ENV 1046:2001
|
| DIN V ENV 12108-2001
| 塑料管道系統.建筑物內人用冷熱水壓力管道安裝指南
| Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001
|
| DIN V ENV 1329-2-2001
| 建筑物內渣土和廢物傾倒用塑料管道系統(低和高溫).未增塑聚氯乙烯.第2部分:合格評定導則
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1329-2:2001
|
| DIN V ENV 13801-2001
| 建筑結構內(低溫和高溫)渣土和廢棄物排放塑料管道系統.熱塑管.推薦安裝慣例
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001
|
| DIN V ENV 1401-2-2000
| 非壓力地下排水和污水管道用塑料管道系統.硬聚氯乙烯(PVC-U).第2部分:一致性評估指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000
|
| DIN V ENV 1401-3-2001
| 無壓地下排水和排污塑料管道系統.非增塑聚氯乙烯(PVC-U).第3部分:安裝導則
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation; German version ENV 1401-3:2001
|
| DIN V ENV 1451-2-2001
| 建筑物內渣土和廢物傾倒用塑料管道系統(低溫和高溫).聚丙烯.第2部分:合格評定導則
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1451-2:2001
|
| DIN V ENV 1452-6-2002
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).第6部分:安裝指南: 德文版本 ENV 1452-6:2001
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 6: Guidance for installation; German version ENV 1452-6:2001
|
| DIN V ENV 1452-7-2001
| 供水塑料管道系統.未增塑聚氯乙烯(PVC-U).第7部分:合格評定指南
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity; German version ENV 1452-7:2000
|
| DIN V ENV 1453-2-2001
| 清除建筑物內部塵土和廢物(低溫和高溫)用帶結構管壁的塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:合格評
| Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1453-2:2000
|
| DIN V ENV 1455-2-2001
| 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS).第2部分:合格評定
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version ENV 1455-2:2001
|
| DIN V ENV 1519-2-2001
| 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.聚乙烯(PE).第2部分:合格評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version ENV 1519-2:2001
|
| DIN V ENV 1565-2-2001
| 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.苯乙烯共聚體混合物(SAN+PVC).第2部分:合格評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity; German version ENV 1565-2:2001
|
| DIN V ENV 1566-2-2001
| 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.氯化聚氯乙烯(PVC-C).第2部分:合格評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity; German version ENV 1566-2:2001
|
| DIN V ENV 1852-2-2000
| 非壓力地下排水和污水用塑料管道系統.聚丙烯.第2部分:一致性評估指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000
|
| DIN V ENV 1993-4-3-2002
| 歐洲法規3:鋼結構設計.第4-3部分:筒倉、槽罐和管道.管道
| Eurocode 3: Design of steel structures - Part 4-3: Silos, tanks and pipelines; Pipelines; German version ENV 1993-4-3:1999
|
| DIN V ENV 737-6-2003
| 醫用氣體管道系統.第6部分:醫用壓縮氣體和真空終端裝置用探針的尺寸和定位
| Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003
|
| DIN V ENV 852-2002
| 生活用水塑料輸水管道系統.移位評定.實驗室取得的移位值說明指南
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values; German version ENV 852:2001
|
| DIN VDE 0634-2-1987
| 地下電器設備用管道、線槽及其附件
| Ducting and trunking and their accessories for underfloor electrical installations
|
| 編號 | 中文名稱 | 英文名稱 |
|---|