| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A72-120-1973 | 鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A91-701-1999 | 表面處理.工廠水箱,管道和設備的識別.安全標志 | (Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.) |
| NF B40-104-1977 | 耐火制品.煉鋼廠和鑄造廠澆包用磚的尺寸 | (REFRACTORY PRODUCTS. DIMENSIONS OF LADLE BRICKS FOR STEELWORKS AND FOUNDRIES.) |
| NF B51-190-2-2000 | 木質板.取樣、切割和檢驗.第2部分:工廠中的質量控制 | (Wood-based panels - Sampling, cutting and inspection - Part 2 : quality control in the factory.) |
| NF C03-170-1997 | 工廠、系統和設備文件的命名和分類 | (Classification and designation of documents for plants, systems and equipment.) |
| NF C10-104-1997 | 發電廠和變電所的直流輔助設備內的短路電流.第1部分:短路的計算 | (Short-circuit currents in d.c. auxiliary installations in power plants and substations. Part 1 : calculation of short-circuit.) |
| NF C10-105-1997 | 發電廠和變電所的直流輔助設備內短路電流.第2部分:影響的計算 | (Short-circuit currents in d.c. auxiliary installations in power plants and substations. Part 2 : calculation of effects.) |
| NF C61-910F2-2002 | 家用和類似用途的電器配件.廠房控制裝置和配電裝置 | () |
| NF E04-270-2002 | 加工工廠的流程圖.總則 | (Flow diagrams for process plants - General rules.) |
| NF E29-311-1982 | 閥門.閥門制造設備的工廠壓力試驗 | (Valves. Factory pressure testing for valves.) |
| NF E52-401-1955 | 起重機械操縱手勢.在工廠和工地上建議的常規裝卸手勢 | (CONTROL SIGNALS FOR LIFTING MACHINERY. RECOMMENDED SIGNALS FOR ORDINARY HANDLING OPERATIONS IN FACTORIES AND ON BUILDING SITES.) |
| NF E86-401-1-2003 | 工廠制造的鋼罐.第1部分:易燃和不易燃的水污染液體地下儲存用臥式圓柱形單層和雙層鋼罐 | (Workshop fabricated tanks - Part 1 : horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids.) |
| NF F01-310-1990 | 鐵路車輛.訂貨時,廠家及其供貨者之間提供技術的規定 | (RAILWAY ROLLING STOCK. DELIMITATION OF TECHNICAL ALLOWANCES BETWEEN THE CONSTRUCTORS AND THEIR SUPPLIERS FOR THE EXECUTION OF AN ORDER.) |
| NF F19-219-1994 | 鐵路車輛.工廠底漆 | (RAILWAY ROLLING STOCK. SHOP PRIMER.) |
| NF F58-501-1993 | 鐵路鋼軌設備及其制造廠.鋼軌的水準測量和敷設施工.壓型、修整和重新裝料用重型機械 | (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. LEVELLING AND LAYOUT MAINTENANCE OF TRACKS. TAMPING, TRIMMING AND RE-STOCKING HEAVY MECHANICAL.) |
| NF F74-101-3-1996 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第3部分:工廠制作.工廠和現場質量監測.位置固定.可維修性標準.導則 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 3 : MAKING IN FACTORY - QUALITY SUPERVISING IN FACTORY AND ON PLACE. SETTING UP IN POSITION. MAINTENABILITY CRITERION. GUIDE.) |
| NF G54-101-1998 | 制革廠機械.往復式滾壓成形機.安全要求 | (TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 972).) |
| NF G54-102-1998 | 制革廠機械.動片機械裝置.安全要求 | (TANNERY MACHINES. MOVING PLATE MACHINERY. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1035).) |
| NF G54-103-2002 | 制革廠機械.片皮和帶刀剪切機的安全要求 | (Tannery machines - Splitting and bandknife shearing machines - Safety requirements.) |
| NF G54-104-2002 | 制革廠機械.輥子涂覆機的安全要求 | (Tannery machines - Roller coating machine - Safety requirements.) |
| NF G54-105-2002 | 制革廠機械.旋轉容器的安全要求 | (Tannery machines - Rotating process vessels - Safety requirements.) |
| NF L00-081-1992 | 航空航天系列.質量保證.EN 航空航天產品.生產廠質量體系認可 | (Aerospace series. Quality assurance EN. Aerospace products. Approval of the quality system of manufacturers.) |
| NF M03-035-1966 | 選煤廠.圖解符號 | (Coal preparation plant. Graphical symbols.) |
| NF M60-406-1998 | 源自再加工工廠的硝酸反饋溶液.氧化后钚含量的分光光度的測定 | (NITRIC ACID FEED SOLUTIONS FROM REPROCESSING PLANTS. SPECTROPHOTOMETRIC DETERMINATION OF PLUTONIUM AFTER OXIDATION TO PLUTONIUM (VI).) |
| NF M87-227-2003 | 石油和天然氣工業.一般煉油廠用燃燒加熱器 | (Petroleum and natural gas industries - Fire heaters for general refinery service.) |
| NF P16-250-4-2000 | 建筑物內的重力排水系統.第4部分:廢水提升工廠.布局和計算 | (Gravity drainage systems inside buildings - Part 4 : wastewater lifting plants - Layout and calculation.) |
| NF P16-260-1-2001 | 建筑物和現場用廢水提升裝置.施工和試驗原則.第1部分:包含糞便廢物的廢水提升工廠 | (Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1 : lifting plants for wastewater containing faecal matter.) |
| NF P16-260-2-2001 | 建筑物和現場用廢水提升裝置.施工和試驗原則.第2部分:無糞便廢水提升工廠 | (Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2 : lifting plants for faecal-free wastewater.) |
| NF P16-342-1990 | 排水.排水管道上的混凝土制觀察孔用的在工廠加工構件.定義、規范、試驗方法、標記、驗收條件 | (DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF MANHOLES FOR SEWAERAGE NETWORKS. DEFINITIONS SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.) |
| NF P16-343-1990 | 排水.排水管的混凝土制接線盒用工廠加工的元件.定義、規范、試驗方法、標記、驗收條件 | (DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF LAMPHOLES FOR SEWERAGE NETWORKS. DEFINITIONS,SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.) |
| NF P16-700-1-2002 | 廢水處理廠.第1部分:一般建造原則 | (Wastewater treatment plants - Part 1 : general construction principles.) |
| NF P16-700-10-2001 | 污水處理廠.第10部分:安全原則 | (Wastewater treatment plants - Part 10 : safety principles.) |
| NF P16-700-11-2001 | 廢水處理廠.第11部分:要求的一般數據 | (Wastewater treatment plants - Part 11 : general data required.) |
| NF P16-700-13-2003 | 廢水處理廠.第13部分:化學處理.通過沉淀/絮凝作用處理廢水 | (Wastewater treatment plants - Part 13 : chemical treatment - Treatment of wastewater by precipitation/flocculation.) |
| NF P16-700-3-2001 | 污水處理廠.第3部分:預處理 | (Wastewater treatment plants - Part 3 : preliminary treatment.) |
| NF P16-700-4-2002 | 廢水處理廠.第4部分:初步澄清 | (Wastewater treatment plants - Part 4 : primary settlement.) |
| NF P16-700-6-2002 | 廢水處理廠.第6部分:活性污泥處理 | (Wastewater treatment plants - Part 6 : activated sludge process.) |
| NF P16-700-7-2002 | 廢水處理廠.第7部分:固定生物膜反應器 | (Wastewater treatment plants - Part 7 : biological fixed-film reactors.) |
| NF P16-700-8-2001 | 廢水處理廠.第8部分:污泥處理和儲存 | (Wastewater treatment plants - Part 8 : sludge treatment and storage.) |
| NF P16-700-9-2002 | 污水處理廠.第9部分:氣味控制和通風 | (Wastewater treatment plants - Part 9 : odour control and ventilation.) |
| NF P19-828-1999 | 預制混凝土制品.玻璃纖維增強水泥的工廠生產控制的一般規則 | (Precast concrete products - General rules for factory production control of glass-fibre reinforced cement.) |
| NF P22-800-1981 | 金屬結構.中構件在工廠的制備 | (Metal construction. Preparation of parts in the factory.) |
| NF P50-531-1-2002 | 太陽熱收集系統和元件.工廠制造系統.第1部分:一般要求 | (Thermal solar systems and components - Factory made systems - Part 1 : general requirements.) |
| NF P50-531-2-2002 | 太陽熱收集系統和元件.工廠制造系統.第2部分:試驗方法 | (Thermal solar systems and components - Factory made systems - Part 2 : test methods.) |
| NF P75-403-2002 | 建筑物用的絕熱制品.工廠制作的礦棉產品.規范 | (Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification.) |
| NF P75-404-2002 | 建筑物用的絕熱制品.工廠制作的可膨脹聚苯乙烯產品.規范 | (Thermal insulation products for buildings - Factory made products of expanded polystyrene - Specification.) |
| NF P75-405-2002 | 建筑物用的絕熱制品.工廠制作的聚苯乙烯泡沫 (XPS)產品.規范 | (Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification.) |
| NF P75-406-2002 | 建筑物用的絕熱制品.工廠制作的聚亞氨酯(PUR)硬質泡沫塑料產品.規范 | (Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification.) |
| NF P75-407-2002 | 建筑物用的絕熱制品.工廠制作的酚泡沫(PF)產品.規范 | (Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification.) |
| NF P75-408-2002 | 建筑物用的絕熱制品.工廠制作的蜂窩玻璃產品.規范 | (Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification.) |
| NF P75-409-2002 | 建筑物用的絕熱制品.工廠制作木絲產品.規范 | (Thermal insulation products for buildings - Factory made of wood wool (WW) products - Specification.) |
| NF P75-410-2002 | 建筑物用的絕熱制品.工廠制作的膨脹的珍珠巖產品.規范 | (Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification.) |
| NF P75-412-2002 | 建筑物用的絕熱制品.工廠制作的木纖維(WF)膨脹的珍珠巖產品.規范 | (Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification.) |
| NF P75-414-2002 | 建筑物用的絕熱制品.工廠制作的膨脹軟木(ICB)產品.規范 | (Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification.) |
| NF P78-476-2002 | 建筑物用玻璃.隔熱玻璃組件.第6部分:工廠產品控制和循環試驗 | (Glass in building - Insulating glass units - Part 6 : factory production control and periodic tests.) |
| NF P98-636-2001 | 道路標記材料.工廠生產控制的要求 | (Road marking materials - Requirements for the factory production control.) |
| NF P98-730-1992 | 道路建造和維修設備.混凝土工廠.調節檢驗的試驗和工廠類型的定義 | (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. CIMENT CONCRETE PLANT. DEFINITION OF PLANT TYPES AND TESTS FOR ADJUSTMENT CHECKING.) |
| NF T35-506-1994 | 色漆和清漆.鋅粉工廠底漆.襯底的次級制備的定義 | (PAINTS AND VARNISHES. ZINC DUST SHOP PRIMERS. DEFINITION OF SECONDARY PREPARATION GRADES OF SUBSTRATES.) |
| NF T90-201-1979 | 水的試驗.煉油廠含水排出物.取樣 | (TESTING WATER. AQUEOUS EFFLUENTS FROM PETROLEUM REFINERIES. SAMPLING.) |
| NF T90-202-1979 | 水的試驗.煉油廠含水排出物.乙烷水提取物中懸浮有機物質測定 | (TESTING WATER. AQUEOUS EFFLUENTS FROM PETROLEUM REFINERIES. DETERMINATION OF ORGANIC MATTERS IN SUSPENSION IN WATER BY HEXANE EXTRACTION.) |
| NF T90-203-1979 | 水的試驗.煉油廠含水排出物.碳氫化合總含量的測定 | (TESTING WATER. AQUEOUS EFFLUENTS FROM PETROLEUM REFINERIES. DETERMINATION OF TOTAL HYDROCARBONS.) |
| NF T90-204-1979 | 水的試驗.煉油廠含水排出物.酚含量的測定 | (TESTING WATER. AQUEOUS EFFLUENTS FROM PETROLEUM REFINERIES. DETERMINATION OF PHENOLS.) |
| NF U62-162-1978 | 鋼制葡萄酒發酵桶.工廠制造立式圓柱酒桶.最大壓強50mbar | (STEEL WINEMAKING VATS. FACTORY BUILT UPRIGHT CYLINDRICAL VATS. MAXIMUM PRESSURE 50 MBAR.) |
| NF U62-163-1978 | 鋼制葡萄酒發酵桶.工廠制造的壓強大于50mbar的立式或臥式酒桶 | (STEEL WINE FERMENTATION VATS. FACTORY-BUILT CYLINDRICAL VATS,EITHER VERTICAL FOR PRESSURES OVER 50 MILLIBAR,OR HORIZONTAL.) |
| NF U62-164-1979 | 鋼制葡萄酒發酵桶.工廠制造的平行六面體酒桶 | (STEEL WINE FERMENTATION VATS. FACTORY-BUILT PARALLELEPIPEDIC VATS.) |
| NF U65-070-2001 | 面食加工廠.干燥機和冷卻器.安全和衛生要求 | (Pasta processing plants - Dryers and coolers - Safety and hygiene requirements.) |
| NF V46-010-1998 | 成牛的肉.經識別的肉的可追蹤性.屠宰廠、去骨、肉加工、包裝和銷售 | (FULL GROWN CATTLE MEAT. TRACEABILITY OF IDENTIFIED MEAT. CARVING SHOPS, BONING, MEAT WORK, PACKAGING AND SALE.) |
| NF X08-104-1987 | 顏色.鋼鐵工廠.管道系統的標記 | (Colours. Iron and stellfactories. Marking of fluids in pipes.) |
| NF X08-105-1986 | 顏色.化學工廠.管道系統的標記 | (Colours. Chemical factories. Marking of fluids in pipes.) |
| NF X33-006-1998 | 水質.取樣.第13部分:污水管和水處理廠淤泥的取樣指南 | (WATER QUALITY. SAMPLING. PART 13 : GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS. (EUROPEAN STANDARD EN ISO 5667-13).) |
| NF X42-300-1990 | 生物工程.廢水的生物工程處理.廢水處理廠實用規程.防止細菌對人員和環境危害 | (BIOTECHNOLGY. BIOLOGICAL TREATMENT OF WASTE WATER. SEWAGE TREATMENT PLANT CODE OF PRACTICE. PREVENTION FROM BIOLOGICAL RISKS TO PERSONNEL AND THE ENVIRONMENT.) |
| NF X42-308-1997 | 生物技術.環境應用的改造機制.改造廠的慎重排放導則 | (Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified plants.) |
| NF X43-259-1990 | 空氣質量.廠房空氣.粒子污染氣泡部分個人取樣或固定取樣用10mm旋風分離法 | (AIR QUALITY. WORKPLACE AIR. PERSONAL OR STATIONARY SAMPLING OF THE ALVEOLAR FRACTION OF PARTICULATE POLLUTION. SEPARATION METHOD USING A 10 MM CYCLONE.) |
| NF X50-001-4-10-2000 | 動力站設備的征購指南.第4部分:鍋爐附件.第10節:燃氣反硝化作用工廠 | (Guide for the procurement of power station equipment - Part 4 : boiler auxiliaries - Section 10 : flue gas denitrification (DE-NOx) plant.) |
| NF X50-001-6-3-1998 | 發電站設備的采購指南.第6-3部分:渦輪機附件.壓縮工廠 | (Guide for procurement of power station equipment. Part 6-3 : turbine auxiliaries. Condenser plant.) |
| 編號 | 中文名稱 | 英文名稱 |