| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0600311-2007 | 直流電力系統.電信環境保護 | DC Power Systems - Telecommunications Environment Protection |
| ANSI ATIS0600328-2007 | 從物理應力和放射影響及直流電力系統相關要求中對遠程通信線路進行保護 | Protection of Telecommunications Links from Physical Stress and Radiation Effects and Associated Requirements for DC Power Systems |
| ANSI C29.1-1988 | 電力絕緣子.試驗方法 | Electrical Power Insulators, Test Methods for |
| ANSI C37.16-2000 | 低壓電力斷路器和交流電力電路保護器的優選額定值、相關要求和應用建議 | Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors, Preferred Ratings, Related Requirements and Application Recommendations for |
| ANSI C37.17-1997 | 交流和通用直流低壓電力斷路器的斷開裝置 | Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers |
| ANSI C37.46-2000 | 電力熔斷器和熔絲切斷開關規范 | Power Fuses and Fuse Disconnecting Switches, Specifications for |
| ANSI C37.50-1989 | 開關設備.封裝式低壓交流電力線路斷路器.試驗程序 | Switchgear – Low-Voltage AC Power Circuit Breakers Used in Enclosures – Test Procedures |
| ANSI C37.51-2003 | 金屬封裝低壓交流電力斷路器開關設備組件.合格試驗規程 | Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
| ANSI C37.85-2002 | 電力開關用交流高壓電力真空斷路器的X射線輻射極限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI C57.12.51-1981 | 三相，高壓601至34500伏,低壓208Y/120至4160伏容量不小于501千伏安,通風干式電力變壓器的要求 | Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated |
| ANSI C57.12.52-1981 | 三相，高壓:601至34500伏，低壓:208Y/120至4160伏,容量不小于501千伏安,密封干式電力變壓器的要求 | Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Sealed |
| ANSI C84.1-2006 | 電力系統和設備的美國國家標準.電壓額定值(60Hz) | American National Standard for Electric Power Systems and Equipment - Voltage Ratings (60 Hertz) |
| ANSI C93.3-1995 | 電力線載波線路陷波器的要求 | Requirements for Power-Line Carrier Line Traps |
| ANSI CC1-2005 | 變電站的電力連接 | Electric Power Connection for Substations |
| ANSI T1.337-2004 | 網絡電力傳輸系統的最大電壓、電流和功率級的要求 | Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport System |
| ANSI/ASABE/ISO 3767-2,AMD 1-3-2006 | 拖拉機、農林機械、電力草坪機和園藝設備.操作者控制和其他顯示符號.第2部分:農業拖拉機和機械符號 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 2: Symbols for agricultural tractors and machinery |
| ANSI/ASAE S323.2-1989 | 草坪與花壇電力設施的規定 | Definitions of Powered Lawn and Garden Equipment |
| ANSI/ASHRAE 118.1-2008 | 燃?xì)狻㈦娏腿加蜔崴黝~定值的測試方法 | Method of Testing for Rating Commercial Gas, Electric, and Oil Service Water Heating Equipment |
| ANSI/ATIS 0632000-2005 | 電信.防高空電磁脈沖(HEMP)的指定電信中心局和類似機構的高空基線電力保護 | Telecommunications – Above-Baseline Electrical Protection for Designated Telecommunications Central Offices and Similar-Type Facilities against High-Altitude Electromagnetic Pulse (HEMP) |
| ANSI/CEA 600.31-1997 | 電力線物理層和介質規范 | Power Line Physical Layer and Medium Specification |
| ANSI/CEA 600.38-1997 | 電力線/RF符號編碼子層 | Power Line/RF Symbol Encoding Sublayer |
| ANSI/CEA 633.31-2000 | 電力線物理層一致性 | Power Line Physical Layer Conformancce |
| ANSI/CEA 709.2-A-2000 | 控制網絡電力線(PL)信道規范 | Control Network Powerline (PL) Channel Specification |
| ANSI/ICEA S-108-720-2004 | 額定電壓46至345KV的擠壓絕緣電力電纜的標準 | Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV |
| ANSI/ICEA S-76-474-2005 | 中性線支撐的額定值600伏特的抗風化擠制絕緣電力電纜組件 | Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts |
| ANSI/ICEA S-97-682-2007 | 多用途屏蔽的電力電纜額定電壓5～46kV用標準 | Standard For Utility Shielded Power Cables Rated 5 Through 46 kV |
| ANSI/IEEE 1015-2006 | 工業和商業電力系統用低壓斷路器的推薦實施規程(藍皮書) | Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems (Blue Book) |
| ANSI/IEEE 1015/Cor1-2007 | 工業和商業電力系統用低壓電路斷路器應用的推薦實施規程.技術勘誤1 | Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - Corrigendum 1 |
| ANSI/IEEE 1048-2003 | 電力線保護接地用指南 | Guide for Protective Grounding of Power Lines |
| ANSI/IEEE 1070-2006 | 電力傳輸模塊恢復結構元件設計和試驗指南 | Guide for the Design and Testing of Transmission Modular Restoration Structure Components |
| ANSI/IEEE 1120-2004 | 海底電力和通信電纜的規劃、設計和安裝中所考慮因素的指南 | Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable |
| ANSI/IEEE 1138-1994 | 電氣公用設施電力線用復合光纖接地線(OPGW)的標準結構 | Standard Construction of Composite Fiber Optic Groundwire (OPGW) for use on Electric Utility Power Lines |
| ANSI/IEEE 1159-1995 | 檢測電力質量的推薦實施規范 | Recommended Practice on Monitoring Electric Power Quality |
| ANSI/IEEE 1234-2007 | 屏蔽電力電纜系統故障定位技術指南 | Guide for Fault Locating Techniques on Shielded Power Cable Systems |
| ANSI/IEEE 1235-2000 | 地下電力電纜和管道用可識別護套的特性指南 | Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
| ANSI/IEEE 1260-2007 | 用電力導線預報、測量和分析AM廣播再輻射的指南 | Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines |
| ANSI/IEEE 1276-2006 | 液浸式電力變壓器的高溫安裝材料的使用指南 | Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers |
| ANSI/IEEE 1291-1993 | 電力開關設備局部放電測量指南 | Guide for Partial Discharge Measurements in Power Switchgear |
| ANSI/IEEE 1299/C62.22.1-1996 | 保護絕緣屏蔽電力電纜系統的電涌放電器的連接指南 | Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems |
| ANSI/IEEE 1312-1993 | 電力系統.標稱工作電壓在230千伏以上的交流電力系統和設備用優選電壓額定值 | Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal |
| ANSI/IEEE 1346-1998 | 評估電力系統和電子處理設備兼容性的推薦實施規程 | Recommended Practice for Evaluating Electrical Power System Compatibility with Electronic Process Equipment |
| ANSI/IEEE 1407-2007 | 使用水罐裝容器進行中等電壓(5kV-35kV)擠壓電力電纜加速老化試驗的指南 | Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks |
| ANSI/IEEE 1410-2004 | 電力架空配電線的避雷性能提高的指南 | Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines |
| ANSI/IEEE 142-2007 | 工業和商業電力系統接地的推薦實施規程 | Recommended Practice for Grounding of Industrial and Commercial Power Systems |
| ANSI/IEEE 1427-2006 | 空氣絕緣電力變電站適宜電間隙和絕緣水平指南 | Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations |
| ANSI/IEEE 1453-2004 | 交流電力系統的電壓閃變測量和限值推薦規程 | Recommended Practice for Measurement and Limits of Voltage Flicker on AC Power Systems |
| ANSI/IEEE 1476-2000 | 火車客車輔助電力系統接口標準 | Standard for Passenger Train Auxiliary Power Systems Interfaces |
| ANSI/IEEE 1481-1999 | 延遲和電力計算系統標準 | Standard for Delay and Power Calculation System |
| ANSI/IEEE 1511-2004 | 額定電壓為5kV至46 kV的系統上電力電纜、接頭和終端故障的調查和分析指南 | Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV |
| ANSI/IEEE 1542-2007 | 位于附近或電力線下面的灌溉設備的安裝、維修和操作指南 | Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines |
| ANSI/IEEE 1547-2003 | 帶電力系統的互連分配資源標準 | Standard for Interconnecting Distributed Resources with Electric Power Systems |
| ANSI/IEEE 1547.3-2007 | 分配資源與電力系統互連的監控、信息交流和控制導則 | Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems |
| ANSI/IEEE 1560-2005 | 100赫茲到10千兆赫范圍內射頻電力線路抗干擾濾波器的測量方法標準 | Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
| ANSI/IEEE 1561-2007 | 遠程混合電力系統中酸性鉛蓄電池的性能和壽命的優化用指南 | Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems |
| ANSI/IEEE 1613-2003 | 電力變電站的通信網絡裝置的標準環境和試驗要求 | Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations |
| ANSI/IEEE 1621-2004 | 辦公室/用戶環境中使用的電子裝置的電力控制中的用戶接口元件標準 | Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments |
| ANSI/IEEE 1646-2004 | 電力變電所自動化用標準通訊傳輸時間性能要求 | Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation |
| ANSI/IEEE 18-2002 | 并聯電力電容器 | Shunt Power Capacitors |
| ANSI/IEEE 242-2001 | 工業和商業電力系統的保護和協調的推薦實施規程 | Protection and Coordination of Industrial and Commercial Power Systems, Recommended Practice for |
| ANSI/IEEE 295-1969 | 電子設備電力變壓器 | Electronics Power Transformers |
| ANSI/IEEE 308-2001 | 核電站1E級電力系統標準 | Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations |
| ANSI/IEEE 336-2005 | 核裝置的1E級電力、儀表和控制設備的安裝、檢驗及試驗指南 | Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities |
| ANSI/IEEE 367-1996 | 電力故障導致的發電站地電位升高和感應電壓測定的推薦操作規程 | Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
| ANSI/IEEE 400-2002 | 電力電纜系統現場進行直流高壓試驗的指南 | Direct Voltage Tests on Power Cables in the Field, Guide for Making |
| ANSI/IEEE 400.1-2007 | 額定電壓5kV和更高直流電壓的層壓介質護套電力電纜系統的現場測試指南 | Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage |
| ANSI/IEEE 400.2-2004 | 使用超低頻(VLF)的屏蔽電力電纜系統的現場試驗指南 | Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) |
| ANSI/IEEE 400.3-2006 | 野外環境中屏蔽電力電纜系統局部放電測試用指南 | Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment |
| ANSI/IEEE 446-1995 | 工業和商業用途的應急和備用電力系統 | Emergency and Standby Power Systems for Industrial and Commercial Applications |
| ANSI/IEEE 493-2007 | 可靠的工業及商業電力系統設計用推薦實施規程 | Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems |
| ANSI/IEEE 505-1977 | 發電站電力系統用名詞 | Nomenclature for Generating Station Electric Power Systems |
| ANSI/IEEE 516-2003 | 帶電電力線路的維護方法指南 | Guide for Maintenance Methods on Energized Power Lines |
| ANSI/IEEE 532-2007 | 電力儀器和控制電纜護套的選擇和試驗用指南 | Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables |
| ANSI/IEEE 539-2005 | 與架空電力線路電暈和磁場效應有關術語的標準定義 | Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines |
| ANSI/IEEE 551-2006 | 工業和商用電力系統計算交流短路電流的推薦方法 | Recommended Methods for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems |
| ANSI/IEEE 576-2000 | 工業和商業用絕緣電力電纜的安裝、端接和檢測的推薦實施規程 | Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
| ANSI/IEEE 62-1995 | 電力設備的診斷現場試驗指南.第1部分:充油電力變壓器、調節器和電抗器 | Guide for Diagnostic Field Testing of Electric Power Apparatus – Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
| ANSI/IEEE 635-2003 | 電力電纜鋁護套的選擇和設計指南 | Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| ANSI/IEEE 643-2004 | 電力線路載波器指南 | Guide for Power-Line Carrier Applications |
| ANSI/IEEE 644-1994 | 交流電力線工頻電場和磁場的測量程序 | Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines |
| ANSI/IEEE 741-2007 | 核電站1E級電力系統和設備保護的標準準則 | Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
| ANSI/IEEE 835-1994 | 標準電力電纜的載流容量表 | Standard Power Cable Ampacity Tables |
| ANSI/IEEE C37.10-1996 | 電力斷路器的診斷和故障調查指南 | Guide for Diagnostic and Failure Investigation of Power Circuit Breakers |
| ANSI/IEEE C37.111-1999 | 電力系統用瞬態數據交換(COMTRADE)通用格式 | Common Format for Transient Data Exchange (COMTRADE) for Power Systems |
| ANSI/IEEE C37.118-2005 | 電力系統同步矢量度標準 | Standard for Synchrophasors for Power Systems |
| ANSI/IEEE C37.119-2005 | 電力線路斷路器的斷路器故障保護指南 | Guide for Breaker Failure Protection of Power Circuit Breakers |
| ANSI/IEEE C37.13.1-2006 | 金屬封裝低電壓功率電力斷路器專用開關設備標準 | Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.14-2002 | 外殼用低壓直流電力斷路器 | Low-Voltage DC Power Circuit Breakers Used in Enclosures |
| ANSI/IEEE C37.2-2008 | 標準電力系統裝置功能編號、首字母縮略詞和連接標記 | Standard Electrical Power System Device Function Numbers, Acronyms and Contact Designations |
| ANSI/IEEE C37.20.1-2002 | 帶金屬包殼的低壓電力斷路開關設備 | Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.20.1a-2005 | 金屬殼密封的低壓電力線路斷路器開關設備標準.修改1:短時間和短路可耐電流測試;多電纜連接的最小區域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IEEE C37.20.1b-2006 | 金屬密封的低壓電力斷路器開關設備標準.修改件2:直流電(DC)牽引電力開關控制和輔助電力布線的附加要求 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear |
| ANSI/IEEE C37.91-2008 | 電力變壓器防護用指南 | Guide for Protecting Power Transformers |
| ANSI/IEEE C57.113-2002 | 充液電力變壓器和并聯電抗器的局部放電測量指南 | Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors |
| ANSI/IEEE C57.117-1986 | 公用電力系統的電力變壓器和并聯電抗器失效數據報告指南 | Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems |
| ANSI/IEEE C57.119-2002 | 超出銘牌額定值的負荷下進行油浸電力變壓器升溫試驗的推薦慣例 | Recommended Practice for Performing Temperature Rise Tests on Oil Immersed Power Transformers at Loads Beyond Nameplate Ratings |
| ANSI/IEEE C57.12.01-2005 | 包括固體澆鑄和/或樹脂密封繞組的干式配電和電力變壓器的標準.一般要求 | Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin Encapsulated Windings |
| ANSI/IEEE C57.12.56-1994 | 通風干燥型電力和配電變壓器絕緣系統熱評價的試驗程序 | Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers (reinstatement of administratively withdrawn standard) |
| ANSI/IEEE C57.12.60-1998 | 固體澆鑄和樹脂密封的電力和配電變壓器絕緣系統熱評定試驗程序指南 | Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast and Resin-Encapsulated Power and Distribution Transformers |
| ANSI/IEEE C57.12.70-2000 | 輸電及電力變壓器用終端標志和連接標準 | Standard Terminal Markings and Connections for Distribution and Power Transformers |
| ANSI/IEEE C57.12.80-2002 | 電力分配變壓器術語 | Terminology for Power and Distribution Transformers |
| ANSI/IEEE C57.120-1992 | 電力變壓器和電抗器的損耗評價指南 | Loss Evaluation Guide for Power Transformers and Reactors |
| ANSI/IEEE C57.125-2005 | 電力變壓器和分流扼流器故障研究、記錄和分析指南 | Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors |
| ANSI/IEEE C57.127-2007 | 油浸電力變壓器和電抗器中局部放電聲排放的探測和定位的指南 | Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors |
| ANSI/IEEE C57.136-2000 | 額定功率大于500kVA的油浸式電力變壓器和并聯電抗器的聲級抑制和測定指南 | Guide for Sound Level Abatement and Determination for Liquid-Immersed Power Transformers and Shunt Reactors Rated Over 500 kVA |
| ANSI/IEEE C57.18.10-1998 | 半導體電力整流變壓器要求和標準實施規程 | Standard Practices and Requirements for Semiconductor Power Rectifier Transformers |
| ANSI/IEEE C57.19.00-2004 | 電力裝置套管的標準一般要求和試驗程序 | Standard General Requirements and Test Procedure for Power Apparatus Bushings |
| ANSI/IEEE C57.19.100-1995 | 電力設備套管應用指南 | Guide for Application of Power Apparatus Bushings |
| ANSI/IEEE C57.93-2007 | 液浸式電力變壓器的安裝和維護用指南 | Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
| ANSI/IEEE C57.94-2000 | 干式通用配電及電力變壓器的安裝、應用、操作和維護的推薦規程 | Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General-Purpose Distribution and Power Transformers |
| ANSI/IEEE C62.41.1-2002 | 低壓(1000V及1000V以下)交流電力電路的電涌環境指南 | Guide on the Surge Environment in Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.48-2005 | 電力系統干擾和過壓保護裝置之間相互作用的指南 | Guide on Interactions Between Power System Disturbances and Surge Protective Devices |
| ANSI/IEEE C62.72-2007 | 低壓(1000V或1000V以下)交流電力電路用過電壓保護裝置的應用指南 | Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
| ANSI/IEEE C62.92.1-2000 | 電力設施系統中線接地應用指南.第1部分:說明 | Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 - Introduction |
| ANSI/IEEE C62.92.2-1989 | 公用電力系統中線接地應用指南.第2部分:同步發電機系統電涌保護器件的接地 | Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| ANSI/ISA 61010-1(82.02.01)-2004 | 電力和電子試驗、測量、控制和相關設備:一般要求 | Electric and Electronic Test, Measuring, Controlling, and Related Equipment: General Requirements |
| ANSI/ISA 96.02.01-2008 | 閥門電力傳動裝置的規范指南 | Guidelines for the Specification of Electric Valve Actuators |
| ANSI/NEMA ICEAS-93-639/WC 74-2006 | 用于電能輸電和配電的5～46kV鎧裝電力電纜 | 5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy |
| ANSI/NSF 4(i11)-2006 | 商業烹飪.可再加熱和電力加熱食品架和傳輸設備 | Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment |
| ANSI/UL 1047-2003 | 絕緣電力系統設備標準 | Standard for Isolated Power Systems Equipment |
| ANSI/UL 1072-2007 | 中壓電力電纜的安全標準 | Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006) |
| ANSI/UL 1277-2005 | 任選光纖構件的電力電纜和控制盤電纜的安全標準(第4版) | Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition) |
| ANSI/UL 1561-2005 | 干式通用和電力變壓器 | Dry-Type General Purpose and Power Transformers |
| ANSI/UL 583-2007 | 工業用蓄電池電力貨車標準 | Standard for Electric-Battery-Powered Industrial Trucks |
| ANSI/UL 705-2006 | 電力通風機 | Power Ventilators |
| ANSI/UL 844a-2006 | 電力照明固定設備在(分級)危險場所應用的安全性標準 | Standard for Safety for Electric Lighting Fixtures for Use in Hazardous (Classified) Locations |
| ANSI/UL 977-2003 | 熔斷的電力線路裝置 | Fused Power-Circuit Devices |
| ASME B 31.1a Addenda-2002 | 電力管線.補充件 | (Power piping; Addenda) |
| ASME B31.1-2001 | 電力管線 | (Power piping) |
| ASME BPVC Section 1-2001 | ASME鍋爐和壓力容器規程.第1節:電力鍋爐建造規則 | (ASME Boiler & Pressure Vessel Code - Section 1: Rules for Construction of Power Boilers) |
| ASME BPVC Section 7-2001 | ASME鍋爐和壓力容器規程.第7節:電力鍋爐維護的推薦指南 | (ASME Boiler & Pressure Vessel Code - Section 7: Recommended Guidelines for the Care of Power Boilers) |
| ASNI C92.2-1987 | 標稱工作電壓大于230kV的交流電氣系統和設備用電力系統.首選電壓額定值 | for power systems- alternating-current electrical systems and equipment operating at voltages above 230 kV nominal - preferred voltage ratings |
| ASTM A1009-2005 | 高頻(10kHz-1MHz)電力變壓器和濾波感應器用軟磁性MnZn鐵芯材料標準規范 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
| ASTM F855-2004 | 斷開的電力線及設備上使用的臨時保護性接地裝置的標準規范 | Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment |
| HD 543.2 S1-1995 | 電力系統遠方保護設備的性能和試驗 第2部分：模擬比較系統 | Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems (IEC 60834-2:1993, modified) |
| HD 632 S1-1998 | 額定電壓36 kV 至150 kV的擠壓絕緣電力電纜及其附件 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) |
| IEEE 1015-1997 | 工業和商業電力系統用低壓斷路器的推薦規程. | (Recommended practice for applying low-voltage circuit breakers used in industrial and commercial power systems) |
| IEEE 1046-1991 | 電力設備分布式數字控制及監視的應用指南 | (Application guide for distributed digital control and monitoring for power plants) |
| IEEE 1048-2003 | 電力線的保護接地 | (Protective grounding of power lines) |
| IEEE 1120-1990 | 規劃,設計和安裝海底電力電纜和通訊電纜時考慮因素指南 | (Guide to the factors to be considered in the planning, design, and installation of submarine power and communications cables) |
| IEEE 1159-1995 | 監測電力特性用推薦規程 | (Recommended practice for monitoring electric power quality) |
| IEEE 1235-2000 | 地下電力電纜和管道用可識別護套的性能指南 | (Guide for the properties of identifiable jackets for underground power cables and ducts) |
| IEEE 1248-1998 | 水力發電站的電力系統使用指南 | (Guide for the commissioning of electrical systems in hydroelectric power plants) |
| IEEE 1249-1996 | 水力電力發電廠自動化用計算機控制指南 | (Guide for computer-based control for hydroelectric power plant automation) |
| IEEE 1260-1996 | 用電力線對 AM 廣播再放射進行預測、測量和分析 | (Guide on the prediction, measurement, and analysis of AM broadcast reradiation by power lines) |
| IEEE 1276-1997 | 油冷電力變壓器中高溫絕緣材料使用的試用指南 | (Trial-use guide for the application of high-temperature insulation materials in liquid-immersed power transformers) |
| IEEE 1325-1996 | 電力斷路器的野外故障演習報告 | (Reporting field failur practice for power circuit breakers) |
| IEEE 1344-1995 | 電力系統用同步移相器 | (Synchrophasors for power systems) |
| IEEE 1346-1998 | 評估電力系統和電子處理設備兼容性的推薦規程 | (Recommended practice for evaluating electric power system compatibility with electronic process equipment) |
| IEEE 1366-1998 | 電力分配可靠性指數試驗用指南 | (Trial-use guide for electric power distribution reliability indices) |
| IEEE 1406-1998 | 電力電纜系統用液體中氣體分析的使用指南 | (Guide to the use of gas-in-fluid analysis for electric power cable systems) |
| IEEE 1407-1998 | 使用充水罐進行中壓擠制電力電纜加速老化試驗的試驗指南 | (Trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks) |
| IEEE 141-1993 | 工廠電力分配的推薦規程 | (Recommended practice for electric power distribution for industrial plants) |
| IEEE 1410-1997 | 提高電力架空配電線路避雷性能指南 | (Guide for improving the lightning performance of electric power overhead distribution lines) |
| IEEE 142-1991 | 工商業電力系統的接地推薦規程 | (Recommended practice for grounding of industrial and commercial power systems) |
| IEEE 1459-2000 | 試驗用標準定義. 在正弦曲線,非正弦曲線,平衡和非平衡條件下電力數量測量的試驗用標準定義 | (Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions) |
| IEEE 1476-2000 | 客車輔助電力系統接口 | (Passenger train auxiliary power systems interfaces) |
| IEEE 1547-2003 | 有電力系統的互連配電資源 | (Interconnecting distributed resources with electric power systems) |
| IEEE 1613-2003 | 電力分站中通信網絡設備的環境及測試要求 | (Environmental and testing requirements for communications networking devices in electric power substations) |
| IEEE 18-2002 | 并聯電力電容器 | (Shunt power capacitors) |
| IEEE 241-1990 | 商業建筑物電力系統推薦規程 | (Recommended practice for electric power systems in commercial buildings) |
| IEEE 242-2001 | 工業及商業電力系統保護及配合用推薦規程 | (Recommended practice for protection and coordination of industrial and commercial power systems) |
| IEEE 277-1994 | 水泥廠電力分配的推薦規程 | (Recommended practice for cement plant power distribution) |
| IEEE 295-1969 | 電子設備用電力變壓器 | (Electronics power transformers) |
| IEEE 308-1991 | 核電站1E級電力系統的標準 | (Criteria for class 1E power systems for nuclear power generating stations) |
| IEEE 336-1985 | 核裝置的電力、儀表和控制設備的安裝、檢驗及試驗要求 | (Installation, inspection, and testing requirements for power, instrumentation, and control equipment at nuclear facilities) |
| IEEE 399-1997 | 工業及商業電力系統分析用推薦規程 | (Recommended practice for industrial and commercial power systems analysis) |
| IEEE 400-2001 | 鎧裝電力電纜系統絕緣的現場試驗和評定指南 | (Guide for field testing and evaluation of the insulation of shielded power cable systems) |
| IEEE 493-1997 | 可靠的工業及商業電力系統設計用推薦規程 | (Recommended practice for design of reliable industrial and commercial power systems) |
| IEEE 505-1977 | 發電站電力系統術語命名 | (Nomenclature for generating station electric power systems) |
| IEEE 516-2003 | 帶電電力線維修方法指南 | (Guide for maintenance methods on energized power lines) |
| IEEE 539-1990 | 架空電力線路電暈和無線電噪聲用術語的定義 | (Definitions of terms relating to corona and field effects of overhead power lines) |
| IEEE 576-2000 | 石化工業用絕緣電力電纜的安裝、端接和試驗推薦規程 | (Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications) |
| IEEE 62-1995 | 電力裝置鑒別現場試驗指南.第1部分:油浸式電力變壓器,調節器和電抗器 | (Guide for diagnostic field testing of electrical power apparatus - Part 1: Oil filled power transformers, regulators, and reactors) |
| IEEE 635-1989 | 電力電纜鋁護套的選擇和設計指南 | (Guide for selection and design of aluminium sheaths for power cables) |
| IEEE 643-1980 | 電力線載波應用指南 | (Guide for power-line carrier applications) |
| IEEE 644-1994 | 交流電力線路工業頻率電場和磁場的測量方法 | (Measurement of power frequency electric and magnetic fields from AC power lines) |
| IEEE 664-1993 | 單芯電纜風振阻振器電力分散特性實驗室測量指南 | (Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors) |
| IEEE 666-1991 | 發電站電力服務系統設計指南 | (Design guide for electric power service systems for generating stations) |
| IEEE 741-1997 | 核電站1E級電力系統和設備保護標準 | (Criteria for the protection of class 1E power systems and equipment in nuclear power generating stations) |
| IEEE 824-1994 | 電力系統中的串聯電容器 | (Series capacitors in power systems) |
| IEEE 835-1994 | 電力電纜的載流量表 | (Power cable ampacity tables) |
| IEEE 928-1986 | 地面光電電力系統性能標準 | (Recommended criteria for terrestrial photovoltaic power systems) |
| IEEE C 37.10-1995 | 電力斷路器的診斷和故障調查導則 | (Guide for diagnostic and failure investigation of power circuit breakers) |
| IEEE C 37.111-1999 | 電力系統瞬態數據交換的通用格式 | (Common format for transient data exchange (COMTRADE) for power systems) |
| IEEE C 37.2-1996 | 電力系統設備功能數目及接觸名稱與符號 | (Electrical power system device function numbers and contact designations) |
| IEEE C 37.90.1-2002 | 與電力裝置相關的繼電器和中繼系統的耐電涌性能試驗 | (Surge withstand capability (SWC) tests for relays and relay systems associated with electric power apparatus) |
| IEEE C 57.113-1991 | 充液電力變壓器和分路扼流器部分放電測量指南 | (Guide for partial discharge measurement in liquid-filled power transformers and shunt reactors) |
| IEEE C 57.117-1986 | 電業局電源系統電力變壓器和分流扼流器故障數據報告指南 | (Guide for reporting failure data for power transformers and shunt reactors on electric utility power systems) |
| IEEE C 57.12.00-2000 | 油浸式配電,電力和調壓變壓器的一般要求 | (General requirements for liquid-immersed distribution, power, and regulating transformers) |
| IEEE C 57.12.01-1998 | 包括固體澆鑄和/或樹脂密封繞組式在內的干式配電和電力變壓器的一般技術要求 | (General requirements for dry-type distribution and power transformers including those with solid-cast and/or resin-encapsulated windings) |
| IEEE C 57.12.56-1986 | 通風干式電力和配電變壓器絕緣系統熱評定的測試程序 | (Test procedure for thermal evaluation of insulation systems for ventilated dry-type power and distribution transformers) |
| IEEE C 57.12.60-1998 | 固體澆鑄和樹脂密封的電力和配電變壓器用絕緣系統的熱評定試驗程序指南 | (Guide for test procedures for thermal evaluation of insulation systems for solid-cast and resin-encapsulated power and distribution transformers) |
| IEEE C 57.12.80-2002 | 電力和配電變壓器的術語 | (Terminology for power and distribution transformers) |
| IEEE C 57.12.90-1999 | 油浸式配電、電力和調壓變壓器的試驗規程 | (Test code for liquid-immersed distribution, power, and regulating transformers) |
| IEEE C 57.12.91-2001 | 干式配電和電力變壓器試驗規程 | (Test code for dry-type distribution and power transformers) |
| IEEE C 57.127-2000 | 油浸電力變壓器局部放電所發出聲音探測的試用指南 | (Trial-use guide for the detection of acoustic emissions from partial discharges in oil-immersed power transformers) |
| IEEE C 57.136-2000 | 額定功率大于500kVA的液浸式電力變壓器和并聯電抗器的聲級抑制和測定 | (Sound level abatement and determination for liquid-immersed power transformers and shunt reactors rated over 500 kVA) |
| IEEE C 57.18.10-1998 | 半導體電力整流器變壓器的要求和實施規范 | (Practices and requirements for semiconductor power rectifier transformers) |
| IEEE C 57.19.100-1995 | 電力設備套管應用指南 | (Guide for application of power apparatus bushings) |
| IEEE C 57.93-1995 | 液體浸入電力變壓器的安裝指南 | (Guide for installation of liquid-immersed power transformers) |
| IEEE C 57.94-1982 | 干式通用配電和電力變壓器的安裝,使用,操作和維護推薦規程 | (Recommended practice for installation, application, operation, and maintenance of dry-type general purpose distribution and power transformers) |
| IEEE C 57.96-1999 | 加載干式配電和電力變壓器 | (Loading dry-type distribution and power transformers) |
| IEEE C 62.22.1-1996 | 絕緣保護鎧裝電力電纜電涌放電器的連接指南 | (Guide for the connection of surge arresters to protect insulated, shielded electric power cable systems) |
| IEEE C 62.41.1-2002 | 低壓(1000V及1000V以下)交流電力電路電涌環境指南 | (Guide on the surge environment in low-voltage (1000 V and less) ac power ciruits) |
| IEEE C 62.41.2-2002 | 低壓(1000V及1000V以下)交流電力網中電涌特性規程 | (Practice on characterization of surges in low-voltage (1000 V and less) ac power circuits) |
| IEEE C 62.48-1995 | 電力系統干擾和過壓保護裝置之間相互作用的說明 | (Guide on interactions between power system disturbances and surge-protective devices) |
| IEEE C 62.92-1987 | 電力事業系統中性接地應用指南.第一部分:引言 | (Guide for the application of neutral grounding in electrical utility systems; part 1: introduction) |
| IEEE C 62.92.1-2000 | 電力設施系統中線接地的應用.第1部分:說明 | (Application of neutral grounding in electrical utility systems - Part 1: Introduction) |
| IEEE C 62.92.2-1989 | 電力事業系統中性接地應用指南.第二部分:同步發電機系統接地 | (Guide for the application of neutral grounding in electrical utility systems; part 2: grounding of synchronous generator systems) |
| IEEE C 62.92.3-1993 | 電力事業系統中性接地應用指南.第三部分:發電機輔助系統 | (Guide for the application of neutral grounding in electrical utility systems - Part 3: Generator auxiliary systems) |
| IEEE C 62.92.4-1991 | 電力事業系統中性接地應用指南.第四部分:配電系統 | (Guide for the application of neutral grounding in electrical utility systems; part 4: distribution) |
| IEEE C 62.92.5-1992 | 電力事業系統中性接地應用指南.第五部分:輸電系統和輔助輸電系統 | (Guide for the application of neutral grounding in electrical utility systems; part 5: transmission systems and subtransmission systems) |
| prEN 60076-11-2002 | 電力變壓器 第11部分：干式變壓器 | IEC 60076-11: Power transformers - Part 11: Dry-type transformers |
| prEN 60076-8-1997 | 電力變壓器 第8部分：應用指南 | IEC 60076-8: Power transformers - Application guide |
| prEN 61133-1991 | 電氣索引 機車車輛 電力和熱力/電力機車車輛制成后和和投入運行前的試驗方法 | Future IEC publication 61133; electric traction; rolling stock; test methods of electric and thermal/electric rolling stock on completion of construction and before entry into service |
| prHD 589 S1-1990 | 交流電力系統的線路陷波器 | Line traps for a.c. power systems |
| UL 1047-2003 | 隔離的電力系統設備 | (Isolated power systems equipment ) |
| UL 1066-1997 | 外殼內用的低壓交流和直流電力斷路器 | (Low-voltage AC and DC power circuit breakers used in enclosures ) |
| UL 1072-1995 | 常壓電力電纜 | (Medium-voltage power cables ) |
| UL 1277-2001 | 有可選光纖值的電力電纜和控制底座電纜 | (Electrical power and control tray cables with optional optical-fiber members ) |
| UL 1561-1999 | 干式通用電力變壓器 | (Dry-type general purpose power transformers ) |
| UL 1653-1997 | 電力非金屬管系 | (Electrical nonmetallic tubing ) |
| UL 1741-1999 | 光電電力系統用靜變流器和充電控制器 | (Static inverters and charge controllers for use in photovoltaic power systems ) |
| UL 2161-1996 | 氖變壓器和電力電源 | (Neon transformers and power supplies ) |
| UL 2202-1998 | 電力車輛充電系統設備 | (Electric vehicle (EV) charging system equipment ) |
| UL 495-2000 | 電力控制的液化石油氣分配裝置 | (Power-operated dispensing devices for LP-gas ) |
| UL 508C-2002 | 電力轉換設備 | (Power conversion equipment ) |
| UL 574-2003 | 電力熱油器 | (Electric oil heaters ) |
| UL 60730-2-16A-2002 | 家用和類似用途的自動電氣控制裝置.第2部分:家用和類似用途的浮動式自動電力水位控制設備的特殊要求 | (Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications ) |
| UL 797A-2000 | 電力金屬管.鋁 | (Electrical metallic tubing - Aluminium ) |
| UL 817-2001 | 電線集和電力供給電線 | (Cord sets and power-supply cords ) |
| 編號 | 中文名稱 | 英文名稱 |