| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI A108.4-1999 | 用有機粘結劑或水可洗環氧樹脂陶瓷磚粘結劑鋪設瓷磚的規范(包括ANSI A108.1-1992) | Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) |
| ANSI A118.3-1999 | 耐化學藥品的水可清洗的磁磚安裝和灌漿環氧樹脂和水可清洗的磁磚固定粘結劑規范(包括ANSI A108.1-1992) | Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) |
| ANSI A118.5-1999 | 瓷磚鋪設用耐化學藥品呋喃樹脂砂漿和薄泥漿規范(包括ANSI A108.1-1992) | Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992) |
| ANSI A118.8-1999 | 改良環氧樹脂乳狀砂漿薄泥漿規范(包括ANSI A108.1-1992) | Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992) |
| ANSI/ADA 13-1981 | 假牙冷凍治療修復樹脂 | Denture Cold-Curing Repair Resin |
| ANSI/ADA 17-1983 | 義齒基托臨時更換樹脂 | Denture Base Temporary Relining Resins |
| ANSI/ASTM C581-2003 | 液體設備的玻璃纖維增強結構用熱固性樹脂耐化學腐蝕性測定的實施規范 | Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ANSI/ASTM D1755-2001 | 聚氯乙烯樹脂規范(08.02) | Specification for Poly(Vinyl Chloride) Resins |
| ANSI/ASTM D1763-1994 | 環氧樹脂規范(08.01) | Specification for Epoxy Resins (08.01) |
| ANSI/ASTM D2222-1994 | 氯乙烯樹脂甲醇萃取的試驗方法(X-15-393)(08.01) | Test Method for Methanol Extract of Vinyl Chloride Resins (X-15-393) (08.01) |
| ANSI/ASTM D2291-1998 | 玻璃樹脂環狀試樣制備慣例 | Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
| ANSI/ASTM D2310-2006 | 機制玻璃纖維(玻璃纖維增強熱固樹脂)管規范 | Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D2471-1999 | 活性熱固樹脂膠凝時間和最大放熱溫度測試方法(08.02) | Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02) |
| ANSI/ASTM D2517-2006 | 增塑環氧樹脂氣壓管和配件規范 | Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
| ANSI/ASTM D2538-1995 | 用扭矩流變儀測定聚氯乙烯樹脂熔化的試驗方法(08.02) | Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02) |
| ANSI/ASTM D2873-1994 | 用注汞式孔隙度儀測定聚氯乙烯樹脂的內部孔隙率的試驗方法(08.02) | Test Method for Interior Porosity of Poly (Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (08.02) |
| ANSI/ASTM D2902-2000 | 含氟聚合物樹脂熱縮管件規范(10.02) | Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation |
| ANSI/ASTM D2924-2001 | 增強熱固性樹脂管耐外部壓力試驗(08.04) | Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04) |
| ANSI/ASTM D2925-2001 | 全孔流情況下玻璃纖維(玻璃纖維增強熱固樹脂)束偏轉測試方法 | Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ANSI/ASTM D2992-2006 | 玻璃纖維(增強玻璃纖維的熱固樹脂)管和配件用獲得靜液壓或壓力設計基礎的規范 | Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ANSI/ASTM D2996-2001 | 纖維纏繞"纖維玻璃"(玻璃纖維增強熱固性樹脂)管用規范 | Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe |
| ANSI/ASTM D2997-2001 | 離心成形玻璃纖維(玻璃纖維增強熱固樹脂)管規范 | Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D3030-1995 | 氯乙烯樹脂的揮發性物質(包括水)的試驗方法(08.02) | Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (08.02) |
| ANSI/ASTM D3262-2006 | 纖維玻璃(玻璃纖維增強熱固樹脂)污水管規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ANSI/ASTM D3293-1991 | PTFE樹脂模制薄板規范(08.03) | Specification for PTFE Resin Molded Sheet (08.03) |
| ANSI/ASTM D3297-1988 | PTFE樹脂零件的模塑和機加工公差的實施規程(08.03) | Practice for Molding and Machining Tolerances for PTFE Resin Parts (08.03) |
| ANSI/ASTM D3299-2000 | 纖維纏繞的玻璃纖維增強的熱固樹脂耐化學腐蝕的容器規范(08.04) | Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D3308-2001 | PTFE樹脂切削帶規范(08.03) | Specification for PTFE Resin Skived Tape (08.03) |
| ANSI/ASTM D3367-1998 | 離心力作用下聚氯乙烯樹脂增塑劑吸附作用測試方法(08.02) | Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force (08.02) |
| ANSI/ASTM D3368-1999 | FEP碳氟化合物樹脂薄板和薄膜(08.03) | FEP Fluorocarbon Resin Sheet and Film (08.03) |
| ANSI/ASTM D3369-2001 | TFE碳氟樹脂鑄膜規范 | Specification for TFE-Fluorocarbon Resin Cast Film (08.03) |
| ANSI/ASTM D3517-2006 | 玻璃纖維增強熱固性樹脂壓力管的規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ANSI/ASTM D3567-1997 | 玻璃纖維(玻璃纖維增強熱固樹脂)管和配件的尺寸測定用實施規程 | Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ANSI/ASTM D3596-2001 | 普通聚氯乙烯樹脂中凝膠測定慣例(08.03) | Practice for Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
| ANSI/ASTM D3681-2006 | 在偏轉條件下玻璃纖維(玻璃纖維增強熱固樹脂)管的耐化學腐蝕的試驗方法 | Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ANSI/ASTM D3754-2006 | 玻璃纖維增強熱固性樹脂污水壓力管和工業壓力管的規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ANSI/ASTM D3839-2002 | 柔性增強熱固性樹脂管和增強塑料砂漿管的地下安裝實施規范(08.04) | Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04) |
| ANSI/ASTM D3982-2003 | 接觸壓模制玻璃纖維增強熱固性樹脂管和護罩規范 | Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Duct and Hoods |
| ANSI/ASTM D4024-2000 | 增強熱塑性樹脂法蘭規范(08.04) | Specification for Reinforced Thermosetting Resin (Rtr) Flanges (08.04) |
| ANSI/ASTM D4097-2001 | 纖維玻璃增強的熱固樹脂耐化學藥品罐的規范 | Specification for Conduct Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D4398-2007 | 用板單面曝光法測定玻璃纖維增強熱固性樹脂耐化學性的試驗方法 | Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ANSI/ASTM D4473-2001 | 采用動態機械特性測量熱固樹脂彎曲特性 | Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03) |
| ANSI/ASTM D4895-1998 | 分散產生的聚四氟乙烯(PTFE)樹脂規范(08.03) | Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion (08.03) |
| ANSI/ASTM D5365-2006 | 玻璃纖維(玻璃纖維增強熱固樹脂)管的長期環彎曲應力試驗方法 | Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D5421-2005 | 接觸模制玻璃纖維(玻璃-纖維-增強熱固性樹脂)法蘭的標準規范 | Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ANSI/ASTM D5677-2005 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5685-2005 | 玻璃纖維規范.(玻璃纖維加固的熱硬性樹脂)加壓管配件 | Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ANSI/ASTM D5813-2004 | 現場固化的熱固性樹脂污水管規范 | Specification for Cured-in-place Thermosetting Resin Sewer Pipe |
| ANSI/ASTM D6041-1997 | 接觸模壓"纖維玻璃" (玻璃纖維增強熱固性樹脂)耐腐蝕管和配件規范 | Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ANSI/ASTM D6314-1998 | 碳氟化合物Perfluoromethoxy (MFA)樹脂模塑和壓塑材料規范 | Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials |
| ANSI/ASTM D6456-1999 | 多聚樹脂精密部件規范 | Specification for Finished Parts Made from Polymide Resin |
| ANSI/ASTM D902-2006 | 電絕緣用涂覆柔性樹脂的玻璃織物和玻璃帶狀織物的試驗方法 | Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ANSI/ASTM F1173-2001 | 船用熱固樹脂玻璃纖維管和配件規范 | Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
| ANSI/ASTM F1216a-2007 | 樹脂浸漬管的倒置和硫化條件下現有管線和管道修復的實施規程 | Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube |
| ANSI/ASTM F1473-2007 | 測量聚乙烯管和樹脂抗裂紋緩慢增長的切口拉伸試驗方法 | Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins |
| ANSI/ASTM F1743-1996 | 通過現場硫化熱固性樹脂管的現場拉入安裝對已有管道進行修復的操作規程 | Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F2019-2003 | 將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程 | Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/AWWA C210-2003 | 鋼制水管的內外層用液體環氧樹脂涂層系統 | Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C213a-2002 | 鋼制水管內外的熔融膠合環氧樹脂涂層 | Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/IEEE C57.12.01-2005 | 包括固體澆鑄和/或樹脂密封繞組的干式配電和電力變壓器的標準.一般要求 | Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin Encapsulated Windings |
| ANSI/IEEE C57.12.60-1998 | 固體澆鑄和樹脂密封的電力和配電變壓器絕緣系統熱評定試驗程序指南 | Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast and Resin-Encapsulated Power and Distribution Transformers |
| ANSI/IEEE C57.146-2005 | 硅樹脂浸變壓器產生氣體的說明指南 | Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers |
| ANSI/IPC CF-148A-1998 | 印制板用涂樹脂的金屬板 | Resin-Coated Metal for Printed Boards |
| ANSI/UL 1684-2002 | 增強熱固樹脂管件和配件 | Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| ANSI/UL 1684A-2007 | 超重壁加固熱樹脂管道(RTRC)和配件的補充要求 | Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| ASTM A 775/A 775Ma-2007 | 涂環氧樹脂的鋼筋棒材的標準規范 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| ASTM A 882/A 882Ma-2004 | 填充式環氧樹脂涂層的7股預應力鋼絞線標準規范 | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
| ASTM A 884/A 884M-2006 | 涂環氧樹脂鋼絲與焊絲增強的標準規范 | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement |
| ASTM A 934/A 934M-2007 | 環氧樹脂涂覆的預制鋼筋的標準規范 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |
| ASTM A 950/A 950M-1999 | 熔接環氧樹脂涂層結構鋼氫反應堆和垛板的標準規范 | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
| ASTM A 972/A 972M-2000 | 熔接環氧樹脂涂覆管樁標準規范 | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles |
| ASTM C 1486-2000 | 檢驗?zāi)突瘜W(xué)物質和泥漿擴散的樹脂整體地板表面的標準操作規程 | Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings |
| ASTM C 308-2000 | 耐化學腐蝕樹脂灰漿施工時間、凝固時間及維護凝固強度時間的標準試驗方法 | Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars |
| ASTM C 395-2001 | 耐化學腐蝕的樹脂灰漿標準規范 | Standard Specification for Chemical-Resistant Resin Mortars |
| ASTM C 399-1998 | 耐化學腐蝕樹脂灰漿的使用的標準實施規程 | Standard Practice for Use of Chemical-Resistant Resin Mortars |
| ASTM C 581-2003 | 液體設備用的玻璃纖維增強結構用熱固性樹脂耐化學腐蝕性測定的標準實施規范 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM C 658-1998 | 磚或瓦管用耐化學腐蝕樹脂薄漿標準規范 | Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile |
| ASTM C 723-1998 | 磚和瓦用耐化學侵蝕的樹脂薄漿標準實施規程 | Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile |
| ASTM C 811-1998 | 耐化學侵蝕的樹脂整體面層用混凝土表面制備的標準實施規程 | Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings |
| ASTM C 881/C 881M-2002 | 混凝土用環氧樹脂基膠粘系統的標準規范 | Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
| ASTM C 882-2005 | 斜切法測定混凝土用環氧樹脂粘結劑的粘結強度的標準試驗方法 | Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear |
| ASTM C 883-1989 | 混凝土用環氧樹脂有效收縮性的試驗方法 | Test Method for Effective Shrinkage of Epoxy-Resin Systems Used with Concrete |
| ASTM C 884/C 884M-1998 | 混凝土和環氧樹脂涂層間熱容性的標準試驗方法 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM D 1259-2006 | 樹脂溶液的不揮發物含量的標準試驗方法 | Standard Test Methods for Nonvolatile Content of Resin Solutions |
| ASTM D 1490-2001 | 脲甲醛樹脂溶液中不揮發物含量的標準測試方法 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 1652-2004 | 環氧樹脂中環氧含量的標準試驗方法 | Standard Test Method for Epoxy Content of Epoxy Resins |
| ASTM D 1725-2004 | 樹脂溶液粘度的標準試驗方法 | Standard Test Method for Viscosity of Resin Solutions |
| ASTM D 1726-2003 | 液體環氧樹脂中水解氯含量的標準試驗方法 | Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins |
| ASTM D 1755-1992 | 聚氯乙烯樹脂標準規范 | Standard Specification for Poly(Vinyl Chloride) Resins |
| ASTM D 1763-2000 | 環氧樹脂的標準規范 | Standard Specification for Epoxy Resins |
| ASTM D 2105-2001 | 玻璃纖維增強熱固樹脂管縱向抗張?zhí)匦缘臉?biāo)準試驗方法 | Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ASTM D 2187-1994 | 粒狀離子交換樹脂的物理化學特性的標準試驗方法 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2222-1994 | 氯乙烯樹脂的甲醇萃取標準試驗方法 | Standard Test Method for Methanol Extract of Vinyl Chloride Resins |
| ASTM D 2291-2003 | 玻璃纖維樹脂復合物用環形試樣制作的標準實施規范 | Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
| ASTM D 2310-2006 | 機制的玻璃纖維增強熱固樹脂管的標準分類方法 | Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2471-1999 | 活性熱固樹脂膠凝時間和最大放熱溫度的標準測試方法 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins |
| ASTM D 2474-1992 | 氯乙烯共聚樹脂 | Vinyl Chloride Copolymer Resins |
| ASTM D 2517-2006 | 增強環氧樹脂氣壓管及配件的標準規范 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
| ASTM D 2584-2002 | 固化的增強樹脂燃燒損失的標準試驗方法 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 2689-1988 | 醇酸樹脂試驗 | Testing Alkyd Resins |
| ASTM D 2902-2000 | 電絕緣用含氟聚合物樹脂熱收縮管的標準規范 | Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D 2924-2001 | 增強的熱固樹脂管抗外部壓力性能的標準試驗方法 | Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2925-2001 | 在滿管水流情況下玻璃纖維增強熱固樹脂管射束偏轉的標準試驗方法 | Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ASTM D 2992-2006 | 玻璃纖維(增強的熱固樹脂玻璃纖維)管及配件用液體靜壓設計基礎標準實施規程 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ASTM D 2996-2001 | 纖維纏繞"纖維玻璃"(玻璃纖維增強熱固性樹脂管)標準規范 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2997-2001 | 離心鑄造"纖維玻璃"(玻璃纖維增強的熱固性樹脂)管的標準規范 | Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 3013-1999 | 環氧基樹脂模塑化合物的標準規范 | Standard Specification for Epoxy Molding Compounds |
| ASTM D 3030-1995 | 氯乙烯樹脂中揮發物(包括水)的標準試驗方法 | Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
| ASTM D 3171-2006 | 用基質溶解法測定樹脂基質混合物中纖維含量的標準試驗方法 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3262-2006 | 玻璃纖維增強熱固性樹脂污水管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D 3293-1991 | 聚四氟乙烯樹脂模壓薄板 | PTFE Resin Molded Sheet |
| ASTM D 3294-2003 | 聚四氟乙烯樹脂模壓薄板和基本模壓型材的標準規范 | Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
| ASTM D 3299-2000 | 纖維纏繞的玻璃纖維增強熱固樹脂耐腐蝕容器的標準規范 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 3307-2006 | 全氟烷氧基(PFA)-碳氟樹脂模塑及擠壓材料標準規范 | Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials |
| ASTM D 3308-2006 | 聚四氟乙烯樹脂薄片帶標準規范 | Standard Specification for PTFE Resin Skived Tape |
| ASTM D 3367-1998 | 在離心力作用下聚氯乙烯樹脂的增塑劑吸收作用的試驗方法 | Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force |
| ASTM D 3368-2004 | 氟化乙丙烯(FEP)-碳氟化合物樹脂薄板及薄膜的標準規范 | Standard Specification for FEP-Fluorocarbon Resin Sheet and Film |
| ASTM D 3517-2006 | 玻璃纖維增強熱固性樹脂壓力管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D 3529/D 3529M-1997 | 碳纖維環氧樹脂預浸漬中樹脂固定含量的標準測試方法 | Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3531-1999 | 碳纖維環氧樹脂預浸料坯的樹脂流動性標準試驗方法 | Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3532-1999 | 碳纖維環氧樹脂預浸料坯凝固時間的標準試驗方法 | Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3567-1997 | 增強熱固樹脂管及配件的尺寸測定規程 | Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ASTM D 3596-1992 | 通用聚氯乙烯樹脂中凝膠(斑點)測定的標準實施規程 | Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
| ASTM D 3642-1998 | 某些堿溶性樹脂軟化點的試驗方法 | Test Method for Softening Point of Certain Alkali-Soluble Resins |
| ASTM D 3643-1998 | 某些堿溶性樹脂酸值的試驗方法 | Test Method for Acid Number of Certain Alkali-Soluble Resins |
| ASTM D 3644-2006 | 苯乙烯-馬來酐樹脂酸值的試驗方法 | Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins |
| ASTM D 3664-2004 | 電氣設備中電容器用雙軸取向聚酯樹脂薄膜標準規范 | Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment |
| ASTM D 3681-2006 | 在偏轉條件下玻璃纖維(玻璃纖維增強熱固樹脂)管的耐化學腐蝕的標準試驗方法 | Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ASTM D 3749-1995 | 用氣相色譜液上技術測定聚氯乙烯樹脂中殘余氯乙烯單體的標準試驗方法 | Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique |
| ASTM D 3754-2006 | 玻璃纖維增強熱固性樹脂污水壓力管和工業壓力管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ASTM D 3837-1995 | 堿性可溶樹脂溶液制備的標準實施規程 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
| ASTM D 3839-2002 | 玻璃纖維增強熱固樹脂管地下安裝的標準指南 | Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe |
| ASTM D 3840-2001 | 無壓設備用玻璃纖維增強熱固樹脂管配件標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ASTM D 3963/D 3963M-2001 | 環氧樹脂涂覆鋼筋制造和現場搬運標準規范 | Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars |
| ASTM D 3982-2003 | 接觸模壓制玻璃纖維增強熱固性樹脂管和防護罩標準規范 | Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods |
| ASTM D 4024-2005 | 機制"纖維玻璃"(玻璃纖維增強的熱固性樹脂)法蘭的標準規范 | Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 4097-2001 | 接觸模壓的玻璃纖維增強熱固樹脂耐腐蝕罐標準規范 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 4142-1989 | 環氧樹脂的試驗 | Testing Epoxy Resins |
| ASTM D 4161-2001 | 使用撓性彈性體密封件的"玻璃鋼"(玻璃纖維增強熱固樹脂)管接頭標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| ASTM D 4209-2007 | 纖維素、乳化液、樹脂溶液、蟲漆和清漆的揮發物和非揮發物含量的測定用標準實施規程 | Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes |
| ASTM D 4266-1996 | 粉狀離子交換樹脂預涂覆能力的標準試驗方法 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
| ASTM D 4283-1998 | 硅樹脂液粘度的標準試驗方法 | Standard Test Method for Viscosity of Silicone Fluids |
| ASTM D 4301-2005 | 環氧樹脂和化合物中總氯含量的標準試驗方法 | Standard Test Method for Total Chlorine in Epoxy Resins and Compounds |
| ASTM D 4302-2005 | 美術油彩、樹脂油和醇酸涂料標準規范 | Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 4398-2007 | 用板單面曝光法測定玻璃纖維增強熱固樹脂的耐化學性的標準試驗方法 | Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ASTM D 4426-2001 | 木材層壓板用液態酚醛樹脂中非揮發物含量百分比測定的標準試驗方法 | Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM D 4456-1999 | 粉末狀離子交換樹脂的物理和化學特性的試驗方法 | Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 4548-1991 | 混合離子交換樹脂的陰、陽離子平衡的試驗方法 | Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
| ASTM D 4640-1986 | 熱固性酚醛樹脂沖擊固化時間的測定 | Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins |
| ASTM D 4690-1999 | 脲甲醛樹脂膠粘劑標準規范 | Standard Specification for Urea-Formaldehyde Resin Adhesives |
| ASTM D 4895-2004 | 彌散產生的聚四氟乙烯(PTFF)樹脂的標準規范 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
| ASTM D 5028-1996 | 用熱分析法測試擠拉樹脂固化性的標準試驗方法 | Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
| ASTM D 5042-1990 | 評定微粒子的陰離子交換樹脂有機污染物的試驗方法 | Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM D 5062-1996 | 容積/重量測定法測定樹脂溶液稀釋度的標準試驗方法 | Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination |
| ASTM D 5165-1993 | 用樹脂鍋實驗室制備膠凝載體的標準規范 | Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle |
| ASTM D 5213-2007 | 電絕緣和電介質用聚合樹脂薄膜的標準規范 | Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications |
| ASTM D 5365-2006 | "玻璃鋼"(玻璃纖維增強熱固樹脂)管長期環狀彎曲應變的標準試驗方法 | Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 5421-2005 | 接觸模制玻璃纖維(玻璃-纖維-增強熱固性樹脂)法蘭的標準規范 | Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 5508a-1994 | 液面上毛細管氣相色譜法測定苯乙烯-丙烯腈共聚物樹脂和腈-丁二烯橡膠中殘留丙烯腈單體的標準試驗方法 | Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
| ASTM D 5627-1994 | 顆粒狀離子交換樹脂的水可萃取殘留物的標準試驗方法 | Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins |
| ASTM D 5677-2005 | 用于航空噴氣渦輪機燃料管線的膠粘劑結合型玻璃纖維(玻璃纖維增強熱固性樹脂)管及管配件標準規范 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ASTM D 5685-2005 | "玻璃纖維"(玻璃-纖維-增強熱固樹脂)壓力管配件的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ASTM D 5813-2004 | 現場硫化固定的熱固性樹脂污水管系統的標準規范 | Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
| ASTM D 5958-1999 | 油基油墨樹脂溶液配制用標準操作規程 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
| ASTM D 5974-2000 | 用毛細管氣相色譜法測定妥爾油分級分離產品中脂肪和樹脂酸的標準試驗方法 | Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography |
| ASTM D 6038-2005 | 用沉降溫度測定樹脂/溶劑混合物兼容性的標準試驗方法(始凝點) | Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point) |
| ASTM D 6041-1997 | 接觸模制(玻璃纖維增強熱固樹脂)耐腐蝕管和配件標準規范 | Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ASTM D 6083-2005 | 屋頂用的液態丙烯樹脂涂料的標準規范 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
| ASTM D 6090-1999 | 軟化點樹脂標準試驗方法(杯球法) | Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method) |
| ASTM D 6133-2002 | 通過直接注入一氣體色譜儀測定含溶劑和含水涂料、涂層、樹脂和原材料中丙酮及甲基和丁基醋酸鹽含量的標準試 | Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 6267-2005 | 高溫條件下烴類樹脂的表觀粘度的試驗方法 | Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures |
| ASTM D 6302-1998 | 離子交換樹脂動力行為評價的標準操作規程 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 6314-1998 | 碳氟化合物全氟甲氧基樹脂(MFA)模制和擠壓材料的標準規范 | Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials |
| ASTM D 6440-2005 | 烴類樹脂的相關標準術語 | Standard Terminology Relating to Hydrocarbon Resins |
| ASTM D 6456-1999 | 由聚酰亞胺樹脂生產的精致部件的標準規范 | Standard Specification for Finished Parts Made from Polyimide Resin |
| ASTM D 6493-2005 | 用自動環球儀測定烴類樹脂軟化點的標準試驗方法 | Standard Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus |
| ASTM D 6579-2006 | 尺寸篩析色譜法測定烴和萜烯樹脂的分子重量平均值和分子重量分布用標準實施規程 | Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography |
| ASTM D 6604-2000 | 用差分式掃描熱量儀測定碳?xì)浠衔飿渲Ａ?dǎo)熱溫度的標準實施規程 | Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry |
| ASTM D 6605-2006 | 加熱后測定烴樹脂顏色穩定性的標準實施規程 | Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating |
| ASTM D 6887-2003 | 測定醇酸與樹脂或與樹脂溶液兼容性的標準試驗方法 | Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions |
| ASTM D 6989-2003 | 溶劑和水基墨水樹脂溶液準備的標準規程 | Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions |
| ASTM D 902-2006 | 電絕緣用柔性涂樹脂玻璃布和玻璃纖維絕緣帶的標準試驗方法 | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ASTM E 1067-2007 | 玻璃纖維增強塑料樹脂(FRP)罐/容器的聲排放檢驗用標準實施規程 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 1090-1996 | 樹脂中過氧化二異丙苯及其分解產物的標準試驗方法 | Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins |
| ASTM E 1118-2005 | 強化熱固性樹脂管(RTRP)聲輻射檢驗的標準實施規程 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1396-1990 | 辣椒油樹脂感官評定的標準試驗方法 | Standard Test Method for Sensory Evaluation of Oleoresin Capsicum |
| ASTM E 1556-2003 | 合成革、蜂窩狀夾層板修補用環氧樹脂系統標準規范 | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| ASTM E 28-1999 | 用環球儀測定從松脂制品中取得的樹脂的軟化點的標準試驗方法 | Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus |
| ASTM F 1173-2001 | 船舶用熱固性樹脂玻璃纖維管道系統標準規范 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1216b-2007 | 用樹脂浸漬管倒置和硫化法恢復現有管線和管道的標準實施規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube |
| ASTM F 1473-2007 | 測量聚乙烯管和樹脂的抗裂縫緩慢擴展的切口拉伸試驗用標準試驗方法 | Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins |
| ASTM F 1579-1998 | 外科植入用復芳基酮醚(PAEK)樹脂標準規范 | Standard Specification for Polyaryletherketone (PAEK) Resins for Surgical Implant Applications |
| ASTM F 1635a-2004 | 外科植入物用水解可降解聚酯樹脂和人造支架模型的實驗室降解試驗的標準試驗方法 | Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| ASTM F 1743-1996 | 對現有硫化固定硫化熱固樹脂管牽入安裝管線和管道修復的標準規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 1876-1998 | 外科植入用聚醚酮醚二酮樹脂的標準規范 | Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications |
| ASTM F 1925-1999 | 外科植入物用直餾聚(L-乳酸)樹脂的標準規范 | Standard Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants |
| ASTM F 2019-2003 | 通過玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)的現場拖拉安裝修復已有管道的標準操作規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 2136-2005 | 測定HDPE樹脂或HDPE波紋管抗慢性裂紋增長的凹口恒定帶狀應力(NCLS)試驗的標準試驗方法 | Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe |
| ASTM F 2313-2003 | 摩爾分?jǐn)?shù)大于或等于70%乙二醇的外科植入物用原聚乙二醇和聚乙二醇聚乳酸樹脂標準規范 | Standard Specification for Virgin Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70% Glycolide |
| ASTM F 2579-2006 | 外科植入物用無定型的聚丙交酯和丙交酯乙交酯共聚物樹脂的標準規范 | Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants |
| ASTM F 641a-1998 | 可植入的環氧樹脂電子膠囊密封材料標準規范 | Standard Specification for Implantable Epoxy Electronic Encapsulants |
| ASTM F 702a-1998 | 醫用聚砜樹脂標準規范 | Standard Specification for Polysulfone Resin for Medical Applications |
| ASTM F 881-1994 | 硅樹脂膠和硅樹脂固體(非多孔)面部植入物 | Standard Specification for Silicone Elastomer Facial Implants |
| ASTM F 997a-1998 | 醫療設備用聚碳酸酯樹脂標準規范 | Standard Specification for Polycarbonate Resin for Medical Applications |
| IEEE C 57.12.01-1998 | 包括固體澆鑄和/或樹脂密封繞組式在內的干式配電和電力變壓器的一般技術要求 | (General requirements for dry-type distribution and power transformers including those with solid-cast and/or resin-encapsulated windings) |
| IEEE C 57.12.60-1998 | 固體澆鑄和樹脂密封的電力和配電變壓器用絕緣系統的熱評定試驗程序指南 | (Guide for test procedures for thermal evaluation of insulation systems for solid-cast and resin-encapsulated power and distribution transformers) |
| UL 1684-2000 | 增強的熱固性樹脂導管(RTRC)及配件 | (Reinforced thermosetting resin conduit (RTRC) and fittings ) |
| 編號 | 中文名稱 | 英文名稱 |