| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10097-1-1999 | 金剛石繩索取心鉆探設備 系列A 第1部分:米制單位 | Wireline diamond core drilling equipment - System A - Part 1: Metric units |
| ISO 10097-2-1999 | 金剛石繩索取心鉆探設備 系列A 第2部分:英制單位 | Wireline diamond core drilling equipment - System A - Part 2: Inch units |
| ISO 10098-1992 | 金剛石繩索取心鉆探設備 CSSK體系 | Wireline diamond core drilling equipment; system CSSK |
| ISO 10425-2003 | 石油和天然氣工業用鋼絲繩.最低要求和驗收條件 | Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance |
| ISO 10955-1999 | 航空航天 航空器操縱鋼絲繩用末端接頭和松緊套筒 技術規范 | Aerospace - End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
| ISO 11111-4-2005 | 紡織機械.安全要求.第4部分:紗線加工和繩索制造機械 | Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery |
| ISO 1140-2004 | 纖維繩索.聚酰胺繩索.3、4 和8股絞繩 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| ISO 1141-2004 | 纖維繩索.聚酯繩索.3、4 和8股絞繩 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| ISO 1181-2004 | 纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| ISO 12076-2002 | 鋼絲繩.彈性的實際模量的測定 | Steel wire ropes - Determination of the actual modulus of elasticity |
| ISO 12401-2004 | 小艇.游艇用甲板安全帶和保險繩.安全要求和試驗方法 | Small craft - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods |
| ISO 1346-2004 | 纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes |
| ISO 14573-2002 | 軟靴用滑雪板繩帶裝配.要求和試驗方法 | Snowboard strap bindings for soft boots - Requirements and test methods |
| ISO 15236-3-2007 | 鋼絲繩輸送帶.第3部分:地下設備用輸送帶特殊安全要求 | Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations |
| ISO 16049-2-2005 | 航空貨運設備.緊固帶.第2部分:使用導則及繩套計算 | Air cargo equipment - Restraint straps - Part 2: Utilization guidelines and lashing calculations |
| ISO 16549-2004 | 紡織物.纖維繩的不均勻性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| ISO 17558-2006 | 鋼絲繩.套接法.熔融金屬和樹脂套接 | Steel wire ropes - Socketing procedures - Molten metal and resin socketing |
| ISO 17893-2004 | 鋼絲繩.術語、標記和分類 | Steel wire ropes - Vocabulary, designation and classification |
| ISO 18692-2007 | 海上看守崗用纖維繩.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| ISO 1968-2005 | 纖維繩索和繩索制品.詞匯 | Fibre ropes and cordage - Vocabulary |
| ISO 1969-2004 | 纖維繩索.聚乙烯.3和4股繩索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| ISO 2020-1-1997 | 航空航天 航空器操縱系統用預成形柔性鋼絲繩 第1部分:尺寸和負載能力 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads |
| ISO 2020-2-1997 | 航空航天 航空器操縱系統用預成形柔性鋼絲繩 第2部分:技術規范 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification |
| ISO 21669-2005 | 鋼絲繩.轉動特性的測定 | Steel wire ropes - Determination of rotational properties |
| ISO 2232-1990 | 一般用途非合金鋼絲繩和粗直徑鋼絲繩用拉撥鋼絲 規范 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications |
| ISO 2262-1984 | 一般用途鋼絲繩套環 規范 | General purpose thimbles for use with steel wire ropes; Specification |
| ISO 22846-1-2003 | 個人防跌落保護性設備.繩索接近系統.第1部分:工作系統的基本原理 | Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work |
| ISO 2307-2005 | 纖維繩索.特定物理和機械性能的測定 | Fibre ropes - Determination of certain physical and mechanical properties |
| ISO 23733-2007 | 紡織品.繩絨線.測定線密度的試驗方法 | Textiles - Chenille yarns - Test method for the determination of linear density |
| ISO 2408-2004 | 一般用途鋼絲繩.最低要求 | Steel wire ropes for general purposes - Minimum requirements |
| ISO 2532-1974 | 鋼絲繩 詞匯 三種語言版 | Steel wire ropes; Vocabulary Trilingual edition |
| ISO 2701-1977 | 一般用途非合金鋼絲繩用拉撥鋼絲 驗收條件 | Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance |
| ISO 3108-1974 | 一般用途鋼絲繩 實際斷裂載荷的測定 | Steel wire ropes for general purposes; Determination of actual breaking load |
| ISO 3154-1988 | 礦井提升用的絞合鋼絲繩 交貨的技術要求 | Stranded wire ropes for mine hoisting; technical delivery requirements |
| ISO 3155-1976 | 礦井提升用的絞合鋼絲繩 組成結構 特性和試驗 | Stranded wire ropes for mine hoisting; Fibre components; Characteristics and tests |
| ISO 3156-1976 | 礦井提升用的絞合鋼絲繩 防銹劑、潤滑劑和維修保養 特性和試驗 | Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests |
| ISO 3189-1 Technical Corrigendum 1-2002 | 通用鋼絲繩套.第1部分:一般特性和驗收條件.技術勘誤1 | Sockets for wire ropes for general purposes - Part 1: General characteristics and conditions of acceptance; Technical Corrigensdum 1 |
| ISO 3189-1-1985 | 普通鋼絲繩用套管 第1部分:一般特性和驗收條件 | Sockets for wire ropes for general purposes; Part 1 : General characteristics and conditions of acceptance |
| ISO 3189-2-1985 | 普通鋼絲繩用套管 第2部分:鍛造或機加工套管的特殊要求 | Sockets for wire ropes for general purposes; Part 2 : Special requirements for sockets produced by forging or machined from the solid |
| ISO 3189-3-1985 | 普通鋼絲繩用套管 第3部分:鍛造套管的特殊要求 | Sockets for wire ropes for general purposes; Part 3 : Special requirements for sockets produced by casting |
| ISO 3505-1975 | 繩索和繩索制品 系船用的天然纖維繩索和化學纖維繩索的等效性 | Ropes and cordage; Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels |
| ISO 3652-1975 | 造船 內河船舶 繩索卷車 | Shipbuilding; Inland vessels; Rope reels |
| ISO 4101-1983 | 電梯鋼絲繩用拉拔鋼絲 規范 | Drawn steel wire for elevator ropes; Specifications |
| ISO 4167-2006 | 聚烯烴農用細繩 | Polyolefin agricultural twines |
| ISO 4308-1-2003 | 起重機和提升設備.鋼絲繩的選用.第1部分:總則 | Cranes and lifting appliances - Selection of wire ropes - Part 1: General |
| ISO 4308-2-1988 | 起重機和起重機械 鋼絲繩的選擇 第2部分:流動式起重機 利用系數 | Cranes and lifting appliances; selection of wire ropes; part 2: mobile cranes; coefficient of utilization |
| ISO 4309-2004 | 起重機.金屬絲繩.保養、維修、安裝、檢查和報廢 | Cranes - Wire ropes - Care, maintenance, installation, examination and discard |
| ISO 4344-2004 | 電梯用鋼絲繩.最低要求 | Steel wire ropes for lifts - Minimum requirements |
| ISO 4345-1988 | 鋼絲繩 纖維主芯 規范 | Steel wire ropes; fibre main cores; specification |
| ISO 4346-1977 | 一般用途鋼絲繩 潤滑劑 基本要求 | Steel wire ropes for general purposes; Lubricants; Basic requirements |
| ISO 5080-1994 | 農用西沙爾細繩 | Sisal agricultural twines |
| ISO 5422-1982 | 道路車輛 拖繩、拖纜或拖棒的固定 | Road vehicles; Anchorages for towing ropes, cables or bars |
| ISO 5614-1988 | 礦井提升用的鎖定盤繞鋼絲繩 交貨的技術要求 | Locked coil wire ropes for mine hoisting; technical delivery requirements |
| ISO 6489-2-2002 | 農用車輛.機械連接裝置間拖繩和牽引車輛.第2部分:40 U型鉤規范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2: Specifications for clevis coupling 40 |
| ISO 6984-1990 | 礦山提升鋼絲繩用非合金鋼絲 規范 | Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
| ISO 7531-1987 | 一般用途鋼絲繩吊索 特性和規范 | Wire rope slings for general purposes; Characteristics and specifications |
| ISO 7590-2009 | 鋼絲繩輸送帶.總厚度及覆蓋層厚度的測定方法 | Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
| ISO 7622-1-1984 | 鋼絲繩芯輸送帶 縱向牽引力試驗 第1部分:伸長率測量 | Steel cord conveyor belts; Longitudinal traction test; Part 1 : Measurement of elongation |
| ISO 7622-2-1984 | 鋼絲繩芯輸送帶 縱向牽引力試驗 第2部分:拉伸強度的測量 | Steel cord conveyor belts; Longitudinal traction test; Part 2 : Measurement of tensile strength |
| ISO 7623-1996 | 鋼絲繩芯輸送帶 繩芯與涂層之間粘合力試驗 原始試驗和熱處理 | Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
| ISO 8094-1984 | 鋼絲繩芯輸送帶 繩芯與涂層間粘合強度試驗 | Steel cord conveyor belts; Adhesion strength test of the cover to the core layer |
| ISO 8792-1986 | 鋼絲繩吊具 采用的安全規范和檢驗規程 | Wire rope slings; Safety criteria and inspection procedures for use |
| ISO 8793-1986 | 鋼絲繩 套圈卡緊環眼接頭 | Steel wire ropes; Ferrule-secured eye terminations |
| ISO 8794-1986 | 鋼絲繩 吊索用鉸接索眼 | Steel wire ropes; Spliced eye terminations for slings |
| ISO 9554-2005 | 纖維繩索.一般規范 | Fibre ropes - General specifications |
| ISO 9736-2000 | 航空航天 航空器操縱鋼絲繩的螺紋式鋼制有眼端 尺寸及載荷 | Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads |
| ISO 9737-2000 | 航空航天 航空器操縱鋼絲繩用鍛制耐腐蝕鋼有眼端 尺寸及載荷 | Aerospace - Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9738-2000 | 航空航天 航空器操縱鋼絲繩的旋轉套筒 尺寸及載荷 | Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads |
| ISO 9747-2000 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼雙柄球端 尺寸及載荷 | Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9748-2000 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼球端 尺寸及載荷 | Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9749-2000 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕柱螺栓端 尺寸及載荷 | Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9757-2000 | 航空航天 航空器操縱鋼絲繩旋轉套筒用螺紋式鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads |
| ISO 9758-2000 | 航空航天 航空器操縱鋼絲繩用滾動軸承用螺紋式鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
| ISO 9759-2000 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼叉形端 尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9760-2000 | 航空航天 航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| ISO 9761-2000 | 航空航天 航空器操縱鋼絲繩旋轉套筒用耐腐蝕鋼制鎖定夾 尺寸 | Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions |
| ISO 9762-2000 | 航空航天 航空器操縱鋼絲繩組件 尺寸及端部配件組合 | Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations |
| ISO 9763-1999 | 航空航天 航空器操縱鋼絲繩組件 技術規范 | Aerospace - Aircraft control wire rope assemblies - Technical specification |
| ISO 9902-4-2001 | 紡織機械 噪聲檢測規則 第4部分：紗線處理、纜索和繩索制造機械 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery |
| ISO 9975-1990 | 封閉纏繞礦用非合金鋼絲繩 規范 | Round non-alloy steel wires for locked coil mine winding ropes; specifications |
| ISO/TR 4558-1985 | 小艇 不銹鋼絲繩用索具螺旋扣、叉頭、連接銷和眼孔的主要尺寸 | Small craft; Rigging screws for stainless steel wire rope; Principal dimensions for forks, connection pins and eye-holes |
| ISO/TR 9209-1989 | 明渠水流測量 濕繩改正的確定 | Measurement of liquid flow in open channels; determination of the wetline correction |
| 編號 | 中文名稱 | 英文名稱 |