| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60404-10-1988 | 磁性材料 第10部分:磁性鋼片和鋼帶在中頻下的磁性能的測量方法 | Magnetic materials; part 10: methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| IEC 60404-11-1999 | 磁性材料 第11部分:測定磁性鋼片和鋼帶表面絕緣電阻的試驗方法 | Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip |
| IEC 60404-13-1995 | 磁性材料 第13部分:電工鋼片和鋼帶的密度、電阻率和疊層因數的測量方法 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-2-1996 | 磁性材料 第2部分:用愛普斯坦系統測量電工鋼片和鋼帶的磁性能的方法 | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame |
| IEC 60404-3 AMD 1-2002 | 磁性材料.第3部分:用單片試驗器測量磁鋼片和磁鋼帶的磁性能的方法.修改件1 | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester; Amendment 1 |
| IEC 60404-3 Edition 2.1-2002 | 磁性材料.第3部分:用單片測試儀測量磁性鋼片和鋼帶的磁性能的方法 | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester |
| IEC 60404-3-1992 | 磁性材料 第3部分:用單片測試儀測量磁性鋼片和鋼帶的磁性能的方法 | Magnetic materials; part 3: methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester |
| IEC 60404-8-3-2005 | 磁性材料.第8-3部分:單項材料規范.以半加工狀態交貨的冷軋電工非合金和合金鋼片及鋼帶 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| IEC 60404-8-4-1998 | 磁性材料 第8部分:單項材料規范 第4節:以全加工狀態交貨的冷軋非定向電工鋼片和鋼帶 | Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non oriented electrical steel sheet and strip delivered in the fully-processed state |
| IEC 60404-8-5-1989 | 磁性材料 第8部分:單項材料規范 第5節:具規定機械性能和磁導率的鋼片和鋼帶的規范 | Magnetic materials; part 8: specifications for individual materials; section five: specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| IEC 60404-8-7-1998 | 磁性材料 第8部分:單項材料規范 第7節:以全加工狀態交貨的冷軋晶粒定向電工鋼片和鋼帶 | Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel sheet and strip delivered in the fully-processed state |
| IEC 60404-8-8-1991 | 磁性材料 第8部分:單項材料規范 第8節:中頻下用薄磁鋼帶規范 | Magnetic materials; part 8: specifications for individual materials; section 8: specification for thin magnetic steel strip for use at medium frequencies |
| IEC 60404-9-1987 | 磁性材料 第9部分:磁性鋼片和鋼帶幾何特性的測定方法 | Magnetic materials. Part 9 : Methods of determination of the geometrical characteristics of magnetic steel sheet and strip |
| ISO 12094-1994 | 壓力用途的承壓焊接鋼管 焊接鋼管用鋼帶/鋼板分層缺陷檢測用超聲波試驗 | Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| ISO 4960-1999 | 碳含量大于0.25%的冷軋?zhí)妓劁搸? | Cold-reduced carbon steel strip with a carbon content over 0,25 % |
| ISO 6316-2000 | 結構級熱軋鋼帶 | Hot-rolled steel strip of structural quality |
| ISO 6317-2000 | 商品級和沖壓級熱軋?zhí)妓劁搸? | Hot-rolled carbon steel strip of commercial and drawing qualities |
| ISO 6932-2001 | 最高含碳量為0.25%的冷軋?zhí)妓劁搸? | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 9444-2002 | 連續熱軋不銹鋼帶材、板材和切割長度.尺寸和形狀公差 | Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on dimensions and form |
| ISO 9473-1-2006 | 紡織機械與附件.筘齒用鋼帶.第1部分:冷軋帶鋼 | Textile machinery and accessories - Strip steel for dents of reeds - Part 1: Cold rolled strip steel |
| ISO 9473-2-2006 | 紡織機械與附件.筘齒用鋼帶.第2部分:硬質帶鋼 | Textile machinery and accessories - Strip steel for dents of reeds - Part 2: Hardened strip steel |
| 編號 | 中文名稱 | 英文名稱 |