| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10025-1993 | 熱軋非合金結構鋼制品 交貨技術條件 | Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993) |
| EN 10034-1993 | I字型和H型結構鋼 形狀和尺寸公差 | Structural steel I and H sections; tolerances on shape and dimensions |
| EN 10113-1-1993 | 可焊細晶粒結構鋼的熱軋制品 第1部分：一般交貨條件 | Hot-rolled products in weldable fine grain structural steels; Part 1: General delivery conditions |
| EN 10113-2-1993 | 可焊細晶粒結構鋼的熱軋制品 第2部分：正火軋制鋼的交貨條件 | Hot-rolled products in weldable fine grain structural steels- Part 2: Delivery conditions for normalized rolled steels |
| EN 10113-3-1993 | 可焊細晶粒結構鋼的熱軋制品 第3部分：熱軋鋼的交貨條件 | Hot-rolled products in weldable fine grain structural steels-Part 3: Delivery conditions for thermomechanically rolled steels |
| EN 10137-1-1995 | 調質或沉淀硬化狀態下高屈服強度結構鋼制薄板和寬扁鋼 第1部分：一般交貨條件 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions |
| EN 10137-2-1995 | 調質或沉淀硬化狀態下高屈服強度結構鋼制薄板和寬扁鋼 第2部分：調質鋼的交換條件 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
| EN 10137-3-1995 | 調質或沉淀硬化狀態下高屈服強度結構鋼制薄板和寬扁鋼 第3部分：沉淀硬化鋼的交貨條件 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
| EN 10155-1993 | 改進的抗大氣腐蝕的結構鋼 交貨技術條件 | Structural steels with improved atmospheric corrosion resistance-Ttechnical delivery conditions |
| EN 10210-1-1994 | 非合金及細晶粒結構鋼的熱軋結構空心型材 交貨技術條件 | Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements |
| EN 10210-2-1997 | 非合金及細晶粒結構鋼的熱軋結構空心型材 第2部分：公差、尺寸和截面特性 | Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10225-2001 | 固定海上結構用的可焊接結構鋼 交貨技術條件 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 10238-1996 | 自動噴砂清理和自動涂底漆結構鋼制品 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| prEN 10025-1-2000 | 熱軋結構鋼制品 第1部分：一般交貨條件 | Hot rolled products of structural steels - Part 1: General delivery conditions |
| prEN 10025-2-2000 | 熱軋結構鋼制品 第2部分：非合金結構鋼的交貨技術條件 | Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels |
| prEN 10025-3-2000 | 熱軋結構鋼制品 第3部分：正火/正火軋制可焊接細晶結構鋼的交貨技術條件 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| prEN 10025-4-2000 | 熱軋結構鋼制品 第4部分：熱軋制可焊細晶粒結構鋼的交貨技術條件 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| prEN 10025-5-2000 | 熱軋結構鋼制品 第5部分：改進的抗大氣環境腐蝕結構鋼的交貨技術條件 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| prEN 10025-6-2000 | 熱軋結構鋼制品 第6部分：經淬火和回火處理的具有高屈服強度的結構鋼板材制品的交貨技術條件 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| prEN 10326-2002 | 連續熱浸鍍結構鋼帶和薄鋼帶 交貨技術條件 | Continuously hot-dip coated structural steels strip and sheet - Technical delivery conditions |
| 編號 | 中文名稱 | 英文名稱 |