| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0100803-1998 | 電信.全球開關電話網(GSTN)多媒體終端的概述和參考 | Telecommunications - Overview and Reference for GSTN Multimedia Terminals |
| ANSI C12.9-2005 | 變壓器額定儀表用測試開關 | Test Switches for Transformer-Rated Meters |
| ANSI C37.06a-1989 | 開關裝置.對稱電流限定的交流高壓斷路器.優先額定值和相應要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C37.22-1997 | 用于金屬封閉開關設備的室內交流電中壓開關優選額定值和相關要求性能 | Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C37.32-2002 | 高壓空氣斷路開關、斷路器開關、錯誤初始開關、接地開關、總線支架和附件控制電壓范圍.優選額定值、制造指 | High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges – Schedule of Preferred Ratings, Construction Guidelines and Specifications |
| ANSI C37.33a Supplement-1990 | 轉換開關裝置.高電壓空氣轉換開關.額定控制電壓及其范圍：補充件 | Switchgear - High-voltage air switches - Rated control voltages and their ranges; Supplement |
| ANSI C37.50-2010 | 開關設備.封裝式低壓交流電力線路斷路器.測試規程 | Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures |
| ANSI C37.51-2003 | 金屬封裝低壓交流電力斷路器開關設備組件.合格試驗規程 | Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
| ANSI C37.51a-2010 | 開關設備用美國國家標準.金屬封裝低壓交流電力線路斷路器的開關裝置組件.一致性試驗程序.修改件1：短時耐受 | "American National Standard for Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies - Conformance Test Procedures - Amendment 1: Short-Time Withstand Current Tests". |
| ANSI C37.54-2003 | 金屬封裝開關組件中作為可拆除元件的室內交流高壓斷路器的一致性試驗規程 | Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C37.55-2003 | 金屬覆層中壓開關裝置組件.一致性試驗規程 | Medium Voltage Metal-Clad Switchgear Assemblies -- Conformance Test Procedures |
| ANSI C37.57-2003 | 開關裝置.金屬封裝斷路器開關裝置組件.一致性試驗 | Switchgear – Metal-Enclosed Interrupter Switchgear Assemblies – Conformance Testing |
| ANSI C37.58-2003 | 金屬封裝的開關設備中使用的室內交流中壓開關的一致性試驗規程 | Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear |
| ANSI C37.85-2002 | 電力開關用交流高壓電力真空斷路器的X射線輻射極限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI INCITS 384-2004 | 信息技術.光纖信道.開關結構-3 (FC-SW-3) | Information Technology - Fibre Channel - Switch Fabric - 3 (FC-SW-3) |
| ANSI INCITS 418-2006 | 光纖信道開關構造-4(FC-SW-4)用信息技術 | For Information Technology ?Fibre Channel ?Switch Fabric- 4 (FC-SW-4) |
| ANSI INCITS418-2006 | 信息技術.光纖信道開關構造.4(FC-SW-4) | Information technology - Fibre Channel Switch Fabric - 4 (FC-SW-4) |
| ANSI NCITS 355-2001 | 信息技術.光纖信道開關構造.2 (FC-SW-2) | Information Technology - Fibre Channel Switch Fabric -2 (FC-SW-2) |
| ANSI T1.105.01 (R 200x)-2000 | 電信.同步光纖網絡(SONET).自動保護開關 | Telecommunications - Synchronous Optical Network (SONET) - Automatic Protection Switching |
| ANSI T1.506-1997 | 網絡性能.開關交換訪問網絡傳輸規范 | Network Performance – Switched Exchange Access Network Transmission Specifications |
| ANSI/ASSE 1019-2004 | 防凍自動排水型真空開關墻壁消防栓性能要求 | Performance Requirements for Vacuum Breaker Wall Hydrant, Freeze Resistant Automatic Draining Type |
| ANSI/ASTM F2071-2001 | 位置相近(非接觸式)或限值(機械接觸式)光纖開關規范 | Specification for Switch, Position, Proximity (Non-Contact) or Limit (Mechanical Contact), Fiber Optic |
| ANSI/EIA 446-3-1981 | 0.750方形底座，1銷和2銷0.001到10安培的有指示燈和無指示燈的按鈕開關 | Pushbutton Switches, Illuminated and Nonilluminated, 0.750 Square Mounting, 1 and 2 Poles, 0.001 to 10 Amperes |
| ANSI/EIA 446-4-1981 | 0.625方形底座,1銷和2銷,1安的有指示燈和無指示燈，非靈敏按鈕開關的詳細規范 | Pushbutton Switches 0.625 Sq Mounting, One and Two Pole, 1.0 Ampere, Detail Specification for Illuminated and Non-Illuminated Non-Sensitive |
| ANSI/EIA 446-A-1981 | 非靈敏按鈕開關 | Non-Sensitive Pushbutton Switches |
| ANSI/EIA 448-1B-1992 | 機電開關的標準試驗方法(觸點跳動試驗) | Standard Test Method for Electromechanical Switches (Test for Contact Bounce) |
| ANSI/EIA 448-21A-2000 | 機電元件的試驗標準.開關.用紅外系統法確定機械焊接的交替環境效應 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA 448-24-1993 | 試驗方法24：固體開關轉換試驗 | Test Method 24 Solid State Switch Transfer Tests |
| ANSI/EIA 448-3-A-1990 | 機電開關試驗方法3(色度).注.1990-04-27批準 | Electromechanical Switches, Test Method 3 (Chromaticity) / Note: Approved 1990-04-27. |
| ANSI/EIA 480-1981 | 撥動開關 | Toggle Switches |
| ANSI/EIA 498AA00-1992 | 鍵盤開關的空白詳細規范 | Keyboard Switches, Blank Detail Specification for |
| ANSI/EIA 498AAOO-1992 | 鍵盤開關的空白詳細規范.注:1992-02-07批準 | Keyboard Switches, Blank Detail Specification for / Note: Approved 1992-02-07. |
| ANSI/EIA 498BAOO-1989 | 鍵盤開關的空白詳細規范.注:1989-09-18批準 | Blank Detail Specification for Keyboard Switches / Note: Approved 1989-09-18 |
| ANSI/EIA 498BOOO-1988 | 質量認證的觸摸開關板分規范.注:1988-04-28批準 | Sectional Specification, Touch Stroke Switch Panels of Certified Quality / Note: Approved 1988-04-28. |
| ANSI/EIA 5200000-D-2000 | 已質量認證的專用電機開關的總規范 | Generic Specification for Special-Use Electromechanical Switches of Certified Quality |
| ANSI/EIA 520A000-A-1992 | 質量認證的按扣開關分規范 | Sectional Specification for Pushbutton Switches of Certified Quality |
| ANSI/EIA 520AAAA-A-1991 | 單極接觸式非靈敏按鈕開關的詳細規范 | Non-Sensitive Pushbutton Switch Single-Pole Contact, Detail Specification for |
| ANSI/EIA 520AAAB-A-1991 | 瞬時接觸式非靈敏按鈕開關的詳細規范 | Detail Specification for Non-Sensitive Pushbutton Switch Momentary Contact |
| ANSI/EIA 520AAAC-1990 | 15.88mm安裝孔非靈敏按鈕開關的空白詳細規范.注:1989-08-21批準 | Blank Detail Specification for Switch, Non-Sensitive, Pushbutton 15.88 mm of Mounting Hole / Note: Approved 1989-08-21. |
| ANSI/EIA 520AAOO-1987 | 質量認證的專用按鈕開關空白詳細規范.注:1987-09-25批準 | Blank Detail Specification: Special-Use Pushbutton Switches of Certified Quality / Note: Approved 1987-09-25. |
| ANSI/EIA 520AOOO-A-1992 | 質量認證的專用按鈕開關分規范.注:ANSI/EIA 520A000-1987的修訂和重新編制1992-05-26批準 | Sectional Specification for Pushbutton Switches of Certified Quality / Note: revision and redesignation of ANSI/EIA 520A000-1987 * Approved 1992-05-26. |
| ANSI/EIA 520B000-1991 | 已質量認證的數字開關(指輪開關、按鈕開關和杠桿開關)分規范 | Digital Switches (Thumbwheel, Pushbutton, and Lever Actuated) of Certified Quality, Sectional Specification for |
| ANSI/EIA 520BOOO-1991 | 質量認證的數字開關(指輪開關、按鈕開關和杠桿開關)分規范.注:1991-12-12批準 | Digital Switches (Thumbwheel, Pushbutton, and Lever Actuated) of Certified Quality, Sectional Specification for / Note: Approved 1991-12-12. |
| ANSI/EIA 520C000-1987 | 分規范 ：已質量認證的靈敏開關 | Sectional Specification: Sensitive Switches of Certified Quality |
| ANSI/EIA 520CA00-A-1992 | 已質量認證的專用靈敏開關的空白詳細規范 | Special Use Sensitive Switches of Certified Quality Blank Detail Specification for |
| ANSI/EIA 520CAAA-A-1991 | 基本尺寸單開路觸點的靈敏開關的詳細規范 | Sensitive Switches, Single Break Contacts, Basic Size, Detail Specification for |
| ANSI/EIA 520CAAB-A-1991 | 小尺寸單開路觸點的靈敏開關的詳細規范 | Sensitive Switches, Single Break Contacts, Miniature Size, Detail Specification for |
| ANSI/EIA 520CAAC-A-1992 | 超小型單斷接點組靈敏開關的詳細規范 | Sensitive Switches, Single-Break Contacts, Subminiature Size, Detail Specification for |
| ANSI/EIA 520CAAD-A-1992 | 超超小型7A單斷接點組靈敏開關的詳細規范 | Sensitive Switches, Single-Break Contacts, Sub-Subminiature Size 7A, Detail Specification for |
| ANSI/EIA 520CAOO-A-1992 | 質量認證的專用靈敏開關的空白詳細規范.注:ANSI/EIA 520CA00-1987的修訂和重新編制1992-04-20批準 | Special Use Sensitive Switches of Certified Quality Blank Detail Specification for / Note: revision and redesignation of ANSI/EIA 520CA00-1987 * Approved 1992-04-20. |
| ANSI/EIA 520DOOO-1987 | 質量認證的扳鈕、閘板和搖臂開關分規范.注:1987-04-15批準 | Sectional Specification: Toggle, Paddle, and Rocker Switches of Certified Quality / Note: Approved 1987-04-15. |
| ANSI/EIA 520E000-A-2000 | 已質量認證的直插式開關的分規范 | Sectional Specification for In-Line Switches of Certified Quality |
| ANSI/EIA 520EAAC-1990 | 雙列直插式開關詳細規范 | Detail Specification for Dual-In-Line Switches |
| ANSI/EIA 520EAAD-1990 | 升降滑動驅動的雙列式封裝開關詳細規范 | Detail Specification on Dual-In-Line Package Switches, Raised and Recessed Slide-Actuated |
| ANSI/EIA 520EAOO-1989 | 直插式開關空白詳細規范.注:1989-01-23批準 | Blank Detail Specification for In-Line Switches / Note: Approved 1989-01-23. |
| ANSI/EIA 520F000-A-1996 | 已質量認證的旋轉式開關分規范(2安培或以下的低電流) | Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
| ANSI/EIA 520FA00-1992 | 已質量認證的專用旋轉式開關空白詳細規范 | Blank Detail Specification for Special-Use Rotary Switches of Certified Quality |
| ANSI/EIA 520FAAA-1995 | 已質量認證的(低電流)最大12位置的旋轉式開關的詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
| ANSI/EIA 520FAAB-1995 | 已質量認證的(低電流)最大16位置的旋轉式開關的詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
| ANSI/EIA 520FAOO-1992 | 質量認證的專用旋轉式開關空白詳細規范.注:ANSI/EIA 520FA00-1992的再確認1997-11-06批準 | Blank Detail Specification for Special-Use Rotary Switches of Certified Quality / Note: reaffirmation of ANSI/EIA 520FA00-1992 * Approved 1997-11-06. |
| ANSI/EIA-448-21A-2000 | 機電元件-開關的試驗標準.用紅外系統的機械釬焊的環境影響 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA-5200000-D-2000 | 經質量認證的專用電機開關的通用規范 | Generic Specification for Special-Use Electromechanical Switches of Certified Quality |
| ANSI/EIA-520E000-A-2000 | 質量認證的直插式開關的分規范 | Sectional Specification for In-Line Switches of Certified Quality |
| ANSI/IEEE 1247-2005 | 額定電壓大于1000伏的交流斷路開關標準 | Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts |
| ANSI/IEEE 1291-1993 | 電力開關設備局部放電測量指南 | Guide for Partial Discharge Measurements in Power Switchgear |
| ANSI/IEEE C12.9-1993 | 變壓器額定儀表用測試開關的美國國家標準 | American National Standard for Test Switches for Transformer-Rated Meters |
| ANSI/IEEE C37.012-2005 | 交流高壓斷路器用電容性電流開關的應用指南 | Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.015-2009 | 并聯電抗器開關操作的應用指南 | Guide for the Application of Shunt Reactor Switching |
| ANSI/IEEE C37.016-2006 | 額定電壓為15.5kV-245kV的交流電流(AC)高壓電路開關標準 | Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV |
| ANSI/IEEE C37.083-1999 | 交流高壓斷路器的合成電容電路開關試驗指南 | Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.09a-2005 | 基于對稱電流的交流(AC)高壓斷路器標準試驗程序.修改件1:電容電流開關 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching |
| ANSI/IEEE C37.100-1992 | 電源開關裝置的定義 | Definitions for Power Switchgear |
| ANSI/IEEE C37.100.1-2007 | 1000V以上的額定高壓電源開關的一般要求標準 | Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| ANSI/IEEE C37.121-1989 | 開關裝置.單元變電所.要求 | Switchgear – Unit Substations – Requirements |
| ANSI/IEEE C37.13.1-2006 | 金屬封裝低電壓功率電力斷路器專用開關設備標準 | Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.20.1-2002 | 帶金屬包殼的低壓電力斷路開關設備 | Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.20.1a-2005 | 金屬殼密封的低壓電力線路斷路器開關設備標準.修改1:短時間和短路可耐電流測試;多電纜連接的最小區域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IEEE C37.20.1b-2006 | 金屬密封的低壓電力斷路器開關設備標準.修改件2:直流電(DC)牽引電力開關控制和輔助電力布線的附加要求 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear |
| ANSI/IEEE C37.20.2-1999 | 金屬殼臺式組合開關設備 | Metal-Clad and Station-Type Cubicle Switchgear |
| ANSI/IEEE C37.20.3-2001 | 金屬殼封閉中斷開關裝置的標準 | Standard for Metal-Enclosed Interrupter Switchgear |
| ANSI/IEEE C37.20.4-2001 | 金屬外殼開關設備用室內交流開關(1kV-38kV)標準 | Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear |
| ANSI/IEEE C37.20.7-2007 | 內部電弧故障用壓力等級小于38kV的金屬外殼開關裝置的測試用指南 | Guide for Testing Metal-Enclosed Switchgear Rated Up to 38kV for Internal Arcing Faults |
| ANSI/IEEE C37.24-2003 | 評價太陽輻射對室外鎧裝開關裝置影響的指南 | Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
| ANSI/IEEE C37.40-2003 | 高壓熔斷器,配電封裝單刀空氣開關,熔斷開關和附件的標準工作條件和術語定義 | Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| ANSI/IEEE C37.41-2008 | 交流電源盒配電系統用高壓＞1000V保險絲、保險絲和斷開斷路器、附單極空氣開關外殼的配電、保險絲斷開開關 | Standard Design Tests for High-Voltage (1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories for Use on AC Power and Distribution Systems |
| ANSI/IEEE C37.42-2009 | 高壓（1000 V）沖擊式配電級熔絲、熔絲切斷開關、熔絲鏈以及這些裝置所用配件的規范標準 | Standard for Specifications for High Voltage(1000 Volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches and Fuse Links and Accessories Used with These Devices |
| ANSI/IEEE C37.45-2007 | 額定電壓為1～8.3kV的高壓封閉式單極空氣配電開關的標準規范 | Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
| ANSI/IEEE C37.46-2010 | 高壓( 1000 V)沖出式和電流限制功率等級保險絲和保險絲斷開開關用標準規格 | Standard Specifications for High Voltage ( 1000 V) Expulsion and Current-limiting Power Class Fuses and Fuse Disconnecting Switches |
| ANSI/IEEE C37.48-2004 | 高壓熔斷器、配電封口單極空氣開關、熔絲切斷開關及附件的應用、操作和維護指南 | Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| ANSI/IEEE C37.59-2007 | 電源開關裝置的轉換用標準要求 | Standard Requirements for Conversion of Power Switchgear Equipment |
| ANSI/IEEE C37.60-2003/Cor 1-2004 | 38kV及以下交流系統用架空底座安裝型、干燥地下室型和浸入式電路自動重合開關和故障斷路器的要求標準 | Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV - Corrigendum 1 |
| ANSI/IEEE C37.66-2005 | 交流電系統(1 to 38 kV)用電容器開關的標準要求 | Standard Requirements for Capacitor Switches for Alternating-Current Systems (1 to 38 kV) |
| ANSI/IEEE C37.71-2001 | 三相交流電系統亞層負載斷開開關手工操作要求 | Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for |
| ANSI/IEEE C37.74-2003 | 38kv及以下的交流系統用地下、地下室及底座安裝型負載中斷開關設備和熔融中斷開關設備的標準要求 | Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| ANSI/IEEE C37.81-1989 | 1E類金屬殼電源開關裝置組件的抗震合格鑒定 | Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
| ANSI/IEEE C37.82-1987 | 核電站中1E級設施用開關裝置組件的合格鑒定標準 | Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
| ANSI/NECA 430-2006 | 常壓開關設備安裝標準 | Standard for Installing Medium-Voltage Switchgear |
| ANSI/NEMA KS1-1991 | 封閉式和其他配電裝置開關(600V) | Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts) |
| ANSI/NEMA PB2.1-2007 | 額定電壓600 V或以下的不露帶電部分的配電開關板的適當處理,安裝,操作和維修的一般說明 | General Instructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
| ANSI/SCTE 165-12-2009 | IPCablecom 1.5 第12部分:公用開關電話網絡(PSTN)呼叫信號協議 | IPCablecom 1.5 Part 12: PSTN Gateway Call Signaling Protocol |
| ANSI/SCTE 76-2007 | 天線選擇器開關 | Antenna Selector Switches |
| ANSI/TIA-464-C-1-2004 | PBX開關設備的電信多線終端設備要求,附件1 | Telecommunications Multiline Terminal Systems Requirements for PBX Switching Equipment, Addendum 1 |
| ANSI/TIA/EIA 732.1024-2001 | 蜂窩數字?jǐn)?shù)據資料(CDPD).線路開關式蜂窩數字?jǐn)?shù)據包 | Cellular Digital Packet Data (CDPD) - Circuit Switched Cellular Digital Packet Data |
| ANSI/UL 1008-2008 | 轉換開關設備的安全標準 | Standard for Safety for Transfer Switch Equipment |
| ANSI/UL 1054-2008 | 特殊用途開關安全標準 | Standard for Safety for Special-Use Switches |
| ANSI/UL 1429-2009 | 撥動開關的安全性標準 | Standard for Safety for Pullout Switches |
| ANSI/UL 20-2010 | 一般使用按鈕開關安全性標準 | Standard for Safety for General-Use Snap Switches |
| ANSI/UL 20a-2004 | 通用速動開關 | General-Use Snap Switches |
| ANSI/UL 489-2009 | 模壓外殼斷路器,模壓外殼開關和斷路器外殼的安全性標準 | Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures |
| ANSI/UL 60947-1-2007 | 低壓開關設備和控制設備的安全標準.第1部分:總則 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules |
| ANSI/UL 60947-4-1-2007 | 低壓開關設備和控制設備的安全標準.第4-1部分:電流接觸器和電動機起動器.電機接觸器和電動機起動器 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ANSI/UL 60947-5-2-2007 | 低壓開關設備和控制設備的安全標準.第5-2部分:控制電路裝置和開關元件.近接開關 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches |
| ANSI/UL 61058-1-2009 | 電器開關.第1部分:一般要求 | Switches for Appliances - Part 1: General Requirements |
| ANSI/UL 634-2007 | 帶有防盜警報的連接器和開關的標準 | Standard for Connectors and Switches for Use with Burglar-Alarm Systems (Proposal dated 4-13-07) |
| ANSI/UL 773A-2006 | 用于照明控制的非工業用光電開關安全性標準 | Standard for Safety for Nonindustrial Photoelectric Switches for Lighting Control |
| ASME B 16.40 Erratum-2003 | 燃?xì)夥峙湎到y(tǒng)中的手動熱塑性氣體開關和閥門.對ASME B 16.40-2002的勘誤 | (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems; Erratum to ASME B16.40-2002) |
| ASTM F1578-2007 | 薄膜開關的接觸閉合循環用標準試驗方法 | Standard Test Method for Contact Closure Cycling of a Membrane Switch |
| ASTM F1595-2000(2005) | 薄膜開關目測檢驗時觀測條件的標準實施規程 | Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches |
| ASTM F1596-2007 | 溫度和相對濕度對薄膜開關影響的標準試驗方法 | Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity |
| ASTM F1598-1995(2007) | 測定化學溶劑對薄膜開關圖形重疊影響的標準試驗方法(逐點試驗法) | Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method) |
| ASTM F1661-2009 | 測定薄膜開關接觸彈力的標準試驗方法 | Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch |
| ASTM F1662-2010 | 驗證膜片開關的指定介電耐受電壓和確定介電擊穿電壓的標準試驗方法 | Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch |
| ASTM F1663-2009 | 測定薄膜開關電阻的標準試驗方法 | Standard Test Method for Determining the Capacitance of a Membrane Switch |
| ASTM F1680-2007a | 薄膜開關線路阻抗的測定用標準試驗方法 | Standard Test Method for Determining Circuit Resistance of a Membrane Switch |
| ASTM F1681-2007a | 測定薄膜開關線路元件導體載流量的標準試驗方法 | Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit |
| ASTM F1683-2009 | 薄膜開關、薄膜開關引線組件或薄膜開關元件折皺或彎曲的標準實施規程 | Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component |
| ASTM F1689-2005 | 測定薄膜開關絕緣電阻的標準試驗方法 | Standard Test Method for Determining the Insulation Resistance of a Membrane Switch |
| ASTM F1762-2007 | 將薄膜開關暴露于變化的大氣壓下的標準實施規范 | Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure |
| ASTM F1812-2009 | 測定薄膜開關ESD屏蔽有效性的標準試驗方法 | Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding |
| ASTM F1842-2009 | 測定薄膜開關的塑料基質上油墨或涂層粘附的標準試驗方法 | Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications |
| ASTM F1895-2010 | 膜片開關的浸沒規程 | Practice for Submersion of a Membrane Switch |
| ASTM F1995-2000(2005) | 利用薄膜開關剪切力測定表面安裝設備(SMD)粘著強度的標準試驗方法 | Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch |
| ASTM F1996-2006 | 薄膜開關電路系統銀遷移的標準試驗方法 | Standard Test Method for Silver Migration for Membrane Switch Circuitry |
| ASTM F2071-2000(2006) | 位置近似(非接觸式)或限值(機械接觸式)光纖開關標準規范 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| ASTM F2072-2001(2007) | 薄膜開關軟管洗滌的標準實施規程 | Standard Practice for Hosedown of a Membrane Switch |
| ASTM F2073-2001(2006) | 薄膜開關無損短路檢驗的標準試驗方法 | Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch |
| ASTM F2112-2002 | 薄膜開關的標準術語 | Standard Terminology for Membrane Switches |
| ASTM F2187-2002 | 在薄膜開關或薄膜開關組合上檢測射頻振動影響的標準試驗方法 | Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM F2188-2002 | 在薄膜開關或薄膜開關組合上檢測可變頻振動影響的標準試驗方法 | Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM F2357-2010 | 使用NORMAN工具“RCA”磨擦器測定薄膜開關上墨水和涂層耐磨性的標準試驗方法 | Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader |
| ASTM F2359-2004 | 帶漫射光源的薄膜開關背面照明的顏色測定標準試驗方法 | Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source |
| ASTM F2360-2008 | 測定漫射光源用膜開關反光的亮度的標準試驗方法 | Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source |
| ASTM F2592-2009 | 測量薄膜開關的力位移的標準試驗方法 | Standard Test Method for Measuring the Force-Displacement of a Membrane Switch |
| ASTM F2749-2009 | 測定薄膜開關或組件壓痕效應的標準試驗方法 | Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly |
| ASTM F2750-2009 | 測定薄膜開關或薄膜開關組合彎曲影響的標準試驗方法 | Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly |
| BS 5583-1978 | 工業用低壓開關設備和控制裝置規范.專用觸點繼電器用接線端標記、識別號碼和識別字母 | Specification for low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays |
| EN 12098-2-2001 | 供暖系統控制設備 第2部分：.熱水供暖系統的最佳開關控制設備 | Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems |
| IEEE 1247-1998 | 額定電壓在1000V以上選擇電流的斷路器開關 | (Interrupter switches for alternating current, rated above 1000 volts) |
| IEEE 1291-1993 | 在電源開關中測量局部放電的指南 | (Guide for partial discharge measurement in power switchgear) |
| IEEE C 12.9-1993 | 變壓系數表的測試開關 | (Test switches for transformer-rated meters) |
| IEEE C 37.015-1993 | 分路電抗器開關的應用指南 | (Application guide for shunt reactor switching) |
| IEEE C 37.04a-2003 | 基于平衡電流的交流高壓斷路器的額定結構.修改件1:電容電流開關 | (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching) |
| IEEE C 37.083-1999 | 交流高壓電路斷路器的合成電容電路開關試驗指南 | (Guide for synthetic capacitive current switching tests of AC high-voltage circuit breakers) |
| IEEE C 37.100-1992 | 電源開關設備的定義 | (Definitions for power switchgear) |
| IEEE C 37.20.1-2002 | 鎧裝低壓電源斷路器開關設備 | (Metal-enclosed low-voltage power circuit breaker switchgear) |
| IEEE C 37.20.2-1999 | 金屬包覆的開關設備 | (Metal-clad switchgear) |
| IEEE C 37.20.3-2001 | 金屬封裝中斷器開關 | (Metal-enclosed interrupter switchgear) |
| IEEE C 37.20.4-2001 | 金屬封裝開關裝置中使用的室內交流開關(1kV--38kV) | (Indoor AC switches (1kV - 38kV) for use in metal-enclosed switchgear) |
| IEEE C 37.24-1986 | 太陽輻射戶外鎧裝開關設備上太陽輻射影響的評定指南 | (Guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear) |
| IEEE C 37.30-1997 | 高壓開關的要求 | (Requirements for high-voltage switches) |
| IEEE C 37.34-1994 | 高壓空氣開關的試驗規程 | (Test code for high-voltage air switches) |
| IEEE C 37.35-1995 | 高壓空氣斷路和加載斷路開關的應用、安裝、操作和維修指南 | (Guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches) |
| IEEE C 37.36b-1990 | 角狀間隙空氣開關斷流指南 | (Guide to current interruption with horn-gap air switches) |
| IEEE C 37.37-1996 | 交流高壓空氣開關加載指南(超過1000V) | (Loading guide for AC high-voltage air switches (in excess of 1000 V)) |
| IEEE C 37.38-1989 | 氣體絕緣,金屬盒切斷,斷路和接地開關 | (Gas-insulated, metal enclosed disconnecting, interrupter, and grounding switches) |
| IEEE C 37.40-1993 | 高壓熔斷器、封閉式單刀空氣配電開關、熔斷開關和附件的工作條件和定義 | (Service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.41-2000 | 高壓熔斷器、封閉式單極空氣配電開關、熔斷開關和附件的設計試驗 | (Design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.48-1997 | 高壓熔斷器、封閉式單極空氣配電開關、熔斷器切斷開關和附件的應用、操作和維護指南 | (Guide for the application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.59-2002 | 電源開關設備的轉換要求 | (Requirements for conversion of power switchgear equipment) |
| IEEE C 37.71-2001 | 交流系統用三相手工操作的地下負載隔離開關 | (Three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems) |
| IEEE C 37.73-1998 | 片固定熔化開關設備的要求 | (Requirements for pad-mounted fused switchgear) |
| IEEE C 37.74-2003 | 38kv及以下的交流系統用地下、地下室及底座安裝型負載中斷開關設備和熔融負載中斷開關設備的標準要求 | (Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV) |
| IEEE C 37.81-1989 | 1E級金屬鎧裝電源開關設備組件的抗地震性鑒定指南 | (Guide for seismic qualification of class 1E metal-enclosed power switchgear assemblies) |
| IEEE C 37.82-1987 | 核電站中1E級用開關設備組件的鑒定 | (Qualification of switchgear assemblies for class 1E applications in nuclear power generating stations) |
| UL 1008-1996 | 轉接開關設備 | (Transfer switch equipment ) |
| UL 1054-2003 | 專用轉換開關 | (Special-use switches ) |
| UL 1429-2000 | 撥動開關 | (Pullout switches ) |
| UL 1558-1999 | 有金屬包殼的低壓電路斷路器開關設備 | (Metal-enclosed low-voltage power circuit breaker switchgear ) |
| UL 1567-1998 | 鋁線用插座和開關 | (Receptacles and switches intended for use with aluminium wire ) |
| UL 1659-1997 | 塞繩裝置和電源線用連接插頭刀形開關 | (Attachement plug blades for use in cord sets and power-supply cords ) |
| UL 363-2000 | 閘刀開關 | (Knife switches ) |
| UL 489-2002 | 模制斷路器,模制開關器和斷路器外殼 | (Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures ) |
| UL 61058-1-2002 | 器具的開關 | (Switches for appliances ) |
| UL 634-2000 | 防盜報警系統用連接器和開關 | (Connectors and switches for use with burglar-alarm systems ) |
| UL 773A-1995 | 照明控制用非工業光電開關 | (Nonindustrial photoelectric switches for lighting control ) |
| UL 793-2003 | 排煙和加熱用自動開關屋頂通風孔 | (Automatically operated roof vents for smoke and heat) |
| UL 894-1993 | 危險(分類的)場所用開關 | (Switches for use in hazardous (classified) locations ) |
| UL 917-1994 | 鐘控開關 | (Clock-operated switches ) |
| UL 98-2004 | 包封并且正面不帶電的開關 | (Enclosed and dead-front switches ) |
| UL 98A-2002 | 開放型開關 | (Open type switches ) |
| 編號 | 中文名稱 | 英文名稱 |