| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60335-2-45-2005 | 家用和類似用途電器.安全.第2-45部分:便攜式電熱工具和類似電器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| IEC 60512-15-8-1995 | 電子設備用機電元件 基本試驗程序和測量方法 第15部分:接觸件及引出端機械試驗 第8節:試驗15h:接觸件固定機 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h: Contact retention system resistance to tool application |
| IEC 60743-2001 | 帶電作業 工具、設備和裝置術語 | Live working - Terminology for tools, equipment and devices |
| IEC 60745-1-2006 | 手持式電動工具.安全.第1部分:一般要求 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| IEC 60745-2-1-2006 | 手持式電動工具.安全性.第2-1部分:電鉆和沖擊鉆的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills |
| IEC 60745-2-11-2006 | 手持式電動工具.安全.第2-11部分:往復鋸(曲線鋸和刀鋸)的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| IEC 60745-2-12-2006 | 手持式電動工具.安全.第2-12部分:混凝土振搗器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators |
| IEC 60745-2-13-2006 | 手持式電動工具的安全 第2-13部:鏈鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws |
| IEC 60745-2-14 AMD 1-2006 | 手持式電動工具的安全.第2-14部分:刨刀的特殊要求.修改件1 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers; Amendment 1 |
| IEC 60745-2-14 Edition 2.1-2006 | 手持式電動工具的安全.第2-14部分:刨刀的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
| IEC 60745-2-14-2003 | 手持式電動工具的安全.第2-14部分:電刨的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
| IEC 60745-2-15-2006 | 手持電動工具.安全.第2-15部分:綠籬修剪器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers |
| IEC 60745-2-16-1993 | 手持式電動工具的安全 第2-16部分:鉚釘機的特殊要求 | Safety of hand-held motor-operated electric tools; part 2: particular requirements for tackers |
| IEC 60745-2-17-2003 | 手持式電動工具的安全.第2-17部分:木銑和修整機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers |
| IEC 60745-2-18-2003 | 手持式電動工具的安全.第2-18部分:打包工具的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools |
| IEC 60745-2-19-2005 | 手持式電動工具.安全.第2-19部分:連接器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers |
| IEC 60745-2-2-2006 | 手持式電動工具.安全.第2-2部分:旋具和沖擊扳手的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches |
| IEC 60745-2-20-2003 | 手持式電動工具的安全.第2-20部分:帶鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws |
| IEC 60745-2-21-2003 | 手持式電動工具.安全.第2-21部分:排水溝清理機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners |
| IEC 60745-2-3-2006 | 手持式電動工具的安全 第2-3部分:電動砂輪機、拋光機和盤式砂光機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders |
| IEC 60745-2-4-2006 | 手持式電動工具的安全.第2-4部分:盤式除外的砂輪機和拋光機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
| IEC 60745-2-5-2006 | 手持式電動工具.安全性.第2-5部分:圓盤鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
| IEC 60745-2-6 AMD 1-2006 | 手持式電動工具.安全.第2-6部分:電錘的特殊要求.修改件1 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers; Amendment 1 |
| IEC 60745-2-6 Edition 2.1-2006 | 手持式電動工具.安全性.第2-6部分:電錘的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
| IEC 60745-2-6-2005 | 手持式電動工具的安全.第2-6部分:電錘的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
| IEC 60745-2-7-1989 | 手持式電動工具的安全 第2-7部分:不可燃液體用噴槍的特殊要求 | Safety of hand-held motor-operated electric tools; part 2: particular requirements for spray guns for non-flammable liquids |
| IEC 60745-2-8-2003 | 手持式電動工具的安全.第2-8部分:金屬板剪和步?jīng)_輪廓機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for sheet metal shears and nibblers |
| IEC 60745-2-9-2003 | 手持式電動工具的安全.第2-9部分:攻絲機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers |
| IEC 60832 Corrigendum 1-2000 | 帶電作業用絕緣桿(絕緣棒)及通用工具附件(金具) | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| IEC 60832-1988 | 帶電作業用絕緣桿(絕緣棒)及通用工具附件(金具) | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| IEC 60900-2004 | 帶電作業.交流1000V和直流1500V以下帶電作業用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. |
| IEC 61029-1-1990 | 移動式電動工具的安全 第1部分:一般要求 | Safety of transportable motor-operated electric tools; part 1: general requirements |
| IEC 61029-2-1 AMD 1-1999 | 移動式電動工具的安全 第2-1部分:園鋸的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 1 |
| IEC 61029-2-1 AMD 2-2001 | 移動式電動工具的安全 第2-1部分:圓鋸的特殊要求 修改2 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 2 |
| IEC 61029-2-1-1993 | 移動式電動工具的安全 第2-1部分:圓鋸的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for circular saws |
| IEC 61029-2-10-1998 | 移動式電動工具的安全 第2-10部分:切割砂輪機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders |
| IEC 61029-2-11-2001 | 移動或電動工具的安全 第2-11部分：斜角 臺式鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws |
| IEC 61029-2-2-1993 | 移動式電動工具的安全 第2-2部分:旋臂鋸的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for radial arm saws |
| IEC 61029-2-3 AMD 1-2001 | 移動式電動工具的安全 第2-3部分:刨和刨板機的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers; Amendment 1 |
| IEC 61029-2-3-1993 | 移動式電動工具的安全 第2-3部分:刨和刨板機的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for planers and thicknessers |
| IEC 61029-2-4 AMD 1-2001 | 移動式電動工具的安全 第2-4部分:臺式砂輪機的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders; Amendment 1 |
| IEC 61029-2-4-1993 | 移動式電動工具的安全 第2-4部分:臺式砂輪機的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for bench grinders |
| IEC 61029-2-5 AMD 1-2001 | 移動式電動工具的安全 第2-5部分:帶鋸的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws; Amendment 1 |
| IEC 61029-2-5-1993 | 移動式電動工具的安全 第2-5部分:帶鋸的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for band saws |
| IEC 61029-2-6-1993 | 移動式電動工具的安全 第2-6部分:注水金剛石鉆的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply |
| IEC 61029-2-7-1993 | 移動式電動工具的安全 第2-7部分:注水金剛石鋸的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply |
| IEC 61029-2-8 AMD 1-1999 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 1 |
| IEC 61029-2-8 AMD 2-2001 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改2 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 2 |
| IEC 61029-2-8-1995 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders |
| IEC 61029-2-9-1995 | 移動式電動工具的安全 第2-9部分:斜面鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws |
| IEC 61347-2-5-2000 | 燈的控制裝置 第2-5部分:公共運輸工具照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting |
| IEC 61477 AMD 1-2002 | 帶電作業.工具,器械和設備使用的最低要求.修改件1 | Live working - Minimum requirements for the utilization of tools, devices and equipment; Amendment 1 |
| IEC 61477 AMD 2-2004 | 帶電作業.使用工具、器件和設備的最低要求.修改件2 | Live working - Minimum requirements for the utilization of tools, devices and equipment; Amendment 2 |
| IEC 61477 Edition 1.1-2002 | 帶電作業.工具,器械和設備使用的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61477 Edition 1.2-2005 | 帶電作業.工具、器械和設備使用的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61477-2001 | 帶電作業 使用工具、器件和設備的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61499-2-2005 | 功能塊.第2部分:軟件工具要求 | Function blocks - Part 2: Software tool requirements |
| IEC 62237-2003 | 帶電作業.液壓工具和設備用帶配件的絕緣軟管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| IEC/PAS 62424-2005 | P&I圖示和P&ID工具與PCE-CAE工具間數據交換的過程控制工程要求的表示 | representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools |
| IEC/PAS 62437-2005 | 板式運載工具、船舶和設備上用的接收機保護用無線電干擾特性.限值和測量方法.有源天線規范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specification for active antennas |
| IEC/PAS 62453-1-2006 | 現場設備工具界面規范.第1部分:概念和詳細描述 | Field Device Tool (FDT) interface specification - Part 1: Concepts and detailed description |
| IEC/PAS 62453-2-2006 | 現場設備工具界面規范.第2部分:I網絡總線通訊(NTERBUS) | Field device tool (FDT) interface specification - Part 2: INTERBUS communication |
| IEC/PAS 62453-3-2006 | 現場設備工具界面規范.第3部分:PROFIBUS通訊 | Field device tool (FDT) interface specification - Part 3: PROFIBUS communication |
| IEC/PAS 62453-4-2006 | 現場設備工具界面規范.第4部分:HART通訊 | Field device tool (FDT) interface specification - Part 4: HART communication |
| IEC/PAS 62453-5-2006 | 現場設備工具界面規范.第5部分:現場總線基金會(FOUNDATION FIELDBUS)通訊 | Field device tool (FDT) interface specification - Part 5: FOUNDATION FIELDBUS communication |
| IEC/TS 61944-2000 | 集成電路 生產線批準 論證工具 | Integrated circuits - Manufacturing line approval - Demonstration vehicles |
| ISO 10069-1-1991 | 沖壓工具 彈性體壓縮彈簧 第1部分:一般規范 | Tools for pressing; elastomer pressure springs; part 1: general specification |
| ISO 10069-2-1991 | 沖壓工具 彈性體壓縮彈簧 第2部分:附件規范 | Tools for pressing; elastomer pressure springs; part 2: specification of accessories |
| ISO 10071-1-2001 | 沖壓工具 球形鎖緊沖床 第1部分：用于輕載荷的球形鎖緊沖床 | Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty |
| ISO 10071-2-2005 | 沖壓工具.球形鎖緊沖床.第2部分:用于重載荷的球形鎖緊沖床 | Tools for pressing - Ball-lock punches - Part 2: Ball-lock punches for heavy duty |
| ISO 10072-2004 | 模鑄工具.澆口套.尺寸 | Tools for moulding - Sprue bushes - Dimensions |
| ISO 10073-1991 | 模鑄工具 支承柱 | Tools for moulding; support pillars |
| ISO 10102-2001 | 螺釘和螺母用裝配工具 雙頭呆扳手 扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads |
| ISO 10103-2001 | 螺釘和螺母用裝配工具 雙頭直頸和彎頸梅花扳手 扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| ISO 10104-2001 | 螺釘和螺母用裝配工具 雙頭高頸和矮頸梅花扳手 扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| ISO 10242-1-1998 | 沖壓工具 沖頭柄 第1部分:A型 | Tools for pressing - Punch holder shanks - Part 1: Type A |
| ISO 10242-2-1991 | 沖壓工具 沖頭柄 第2部分:C型 | Tools for pressing; punch holder shanks; part 2: type C |
| ISO 10242-3-1991 | 沖壓工具 沖頭柄 第3部分:D型 | Tools for pressing; punch holder shanks; part 3: type D |
| ISO 10243-1991 | 沖壓工具 矩形截面壓縮彈簧 安裝尺寸和顏色標志 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding |
| ISO 10791-9-2001 | 加工中心試驗條件 第9部分：變換工具和托架的操作時間的評價 | Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change |
| ISO 1085-1999 | 螺釘和螺母用裝配工具 雙頭扳手 對邊尺寸組配 | Assembly tools for screws and nuts - Double-ended wrenches - Size pairing |
| ISO 10907-1-1996 | 模鑄工具 定位環 第1部分:小型和中型模具內無絕熱層安裝用定位環 A型和B型 | Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds - Types A and B |
| ISO 10914-1996 | 螺釘和螺母用裝配工具 花鍵傳動套筒扳手 | Assembly tools for screws and nuts - Sockets and wrenches for spline drive |
| ISO 11054-2006 | 切削工具.高速鋼分組的命名 | Cutting tools - Designation of high-speed steel groups |
| ISO 11415-1997 | 沖壓工具 成套模具 | Tools for pressing - Die sets |
| ISO 1173-2001 | 螺釘和螺母用裝配工具 手動和機動旋轉頭的傳動端及連接部件 尺寸，轉矩試驗 | Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing |
| ISO 1174-1-1996 | 螺釘和螺母用裝配工具 傳動方頭 第1部分:手動套筒板手的傳動方頭 | Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools |
| ISO 1174-2-1996 | 螺釘和螺母用裝配工具 傳動方頭 第2部分:機動套筒扳手工具的傳動方頭 | Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools |
| ISO 11789-1999 | 剛性切割工具的機動邊緣 定義、安全要求和試驗過程 | Powered edgers with rigid cutting means - Definitions, safety requirements and test procedures |
| ISO 1180 ADD 1-1985 | 氣動工具手柄和夾緊套筒配合尺寸 補充1 | Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1 |
| ISO 1180-1983 | 氣動工具手柄和夾緊套筒配合尺寸 | Shanks for pneumatic tools and fitting dimensions of chuck bushings |
| ISO 11900-1-2007 | 沖壓工具.球鎖緊凸模固定板.第1部分:小功率用A型和B型、矩形和正方形固定板 | Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty |
| ISO 11900-2-2001 | 沖壓工具 球鎖緊沖頭固定板 第2部分：用于輕載荷的C型和D型固定板 | Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty |
| ISO 11900-3-2004 | 沖壓工具.球鎖緊沖頭固定板.第3部分:用于重載荷的減徑E型固定板 | Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty |
| ISO 11901-1-2003 | 沖壓工具.氣壓彈簧.第1部分:一般規范 | Tools for pressing - Gas springs - Part 1: General specifications |
| ISO 11901-2-2004 | 沖壓工具.氣壓彈簧.第2部分:附件規范 | Tools for pressing - Gas springs - Part 2: Specification of accessories |
| ISO 11903-1996 | 沖壓工具 導柱裝置 | Tools for pressing - Guide pillar mountings |
| ISO 12165-2000 | 模鑄工具 壓鑄模和注塑模及壓鑄沖模部件 術語和符號 兩種語言版 | Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
| ISO 13399-1-2006 | 切削工具數據表示和交換.第1部分:基本原則和一般信息模式的概括 | Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model |
| ISO 13628-8 Technical Corrigendum 1-2005 | 石油和天然氣工業.水下生產系統的設計和操作.第8部分:水下生產系統上的遙控運載工具接口.技術勘誤1 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems; Technical Corrigendum 1 |
| ISO 13628-8-2002 | 石油和天然氣工業.水下生產系統的設計和操作.第8部分:水下生產系統上的遙控運載工具接口 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
| ISO 14649-121-2005 | 工業自動化系統和集成.機械裝置控制.計算機數控器用數據模型.第121部分:車床用工具 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 121: Tools for turning machines |
| ISO 15600-2000 | 模鑄工具 注塑模用隔熱板 | Tools for moulding - Thermal insulating sheets for injection moulds |
| ISO 15744-2002 | 手持非電動工具.噪聲測量代碼.工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| ISO 15863-2003 | 航天系統.航天飛機與運載工具間接口的控制文獻 | Space systems - Spacecraft-to-launch-vehicle interface control document |
| ISO 16004-2005 | 飛機地面設備.乘客登機橋或運輸工具.與飛機艙門接口的要求 | Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors |
| ISO 16366-2001 | 沖壓工具 成 L 型導向件 | Tools for pressing - L-shaped guides |
| ISO 16367-2001 | 沖壓工具 導板 U- 和 V- 模塊 | Tools for pressing - Guide plates - U- and V-blocks |
| ISO 16915-2003 | 模制工具.直澆口拉出器 | Tools for moulding - Sprue pullers |
| ISO 16916-2004 | 制模工具.注塑模用工具規格表 | Tools for moulding - Tool specification sheet for injection moulds |
| ISO 1703-2005 | 螺釘和螺母用裝配工具.命名和術語 | Assembly tools for screws and nuts - Designation and nomenclature |
| ISO 1711-1-2007 | 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒 | Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets |
| ISO 1711-2-2005 | 螺釘和螺母用裝配工具.技術規范 第2部分:機動套筒(扳手) | Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ("impact") |
| ISO 17401-2004 | 航天系統.運載工具用航天飛行器接口要求文獻 | Space systems - Spacecraft interface requirements document for launch vehicle services |
| ISO 17567-2005 | 農業和林業用拖拉機和全套工具.超液壓動力 | Agricultural and forestry tractors and implements - Hydraulic power beyond |
| ISO 18084-2005 | 壓片工具.沖床和模具 | Press tools for tablets - Punches and dies |
| ISO 2236-1991 | 螺釘和螺母用裝配工具 鍛制的和管狀套筒板手 頭部最大外形尺寸 | Assembly tools for srews and nuts; forged and tubular socket wrenches; maximum outside head dimensions |
| ISO 2351-1-2007 | 螺釘和螺母用裝配工具.機動旋具頭.第1部分:一字槽頭螺釘用旋具頭 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws |
| ISO 2351-2-2002 | 螺釘和螺母用裝配工具.機動旋具頭.第2部分:十字凹頭螺釘用旋具頭 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws |
| ISO 2351-3-2002 | 螺釘和螺母用裝配工具.機動旋具頭.第3部分:六角凹頭螺釘用旋具頭 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws |
| ISO 2380-1-2004 | 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第1部分:手動或者機動旋具工作部 | Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers |
| ISO 2380-2-2004 | 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、旋桿長度和標志 | Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers |
| ISO 2725-1-2007 | 螺釘和螺母用裝配工具.第1部分:手動扳手 | Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets |
| ISO 2725-2-2007 | 螺釘和螺母用裝配工具.方頭鉆動扳手.第2部分:機動扳手尺寸 | Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact") |
| ISO 2725-3-2001 | 螺釘和螺母用裝配工具 方頭傳動套筒 第3部分：機動套筒（非撞擊） 尺寸 | Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non impact"); Dimensions |
| ISO 2726-1995 | 木工工具 金屬臺刨、刨刀和護鐵 | Woodworking tools - Metal-bodied bench planes, plane cutters and cap irons |
| ISO 2729-1995 | 木工工具 鑿子和半圓鑿 | Woodworking tools - Chisels and gouges |
| ISO 2730-1973 | 木工工具 木體刨 | Woodworking tools; Wooden bodied planes |
| ISO 2787-1984 | 鑿巖機械與氣動工具 性能試驗 | Rotary and percussive pneumatic tools; performance tests |
| ISO 2936-2001 | 螺釘和螺母用裝配工具 內六角扳手 | Assembly tools for screws and nuts - Hexagon socket screw keys |
| ISO 3315-1996 | 螺釘和螺母用裝配工具 手動方榫傳動套筒扳手傳動件 尺寸和試驗 | Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests |
| ISO 3316-1996 | 螺釘和螺母用裝配工具 手動方榫傳動套筒扳手附件 尺寸和試驗 | Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests |
| ISO 3317-1974 | 螺釘和螺母用裝配工具 機動工具的六角傳動端 | Assembly tools for screws and nuts; Square drive extension hexagon insert, for power socket wrenches |
| ISO 3318-1990 | 螺釘和螺母用裝配工具 雙頭呆扳手、雙頭梅花扳手和兩用扳手 頭部外形最大寬度 | Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads |
| ISO 3857-1-1977 | 壓縮機、風動工具和風動機械 詞匯 第1部分:通用術語 兩種語言版 | Compressors, pneumatic tools and machines; Vocabulary; Part I : General Bilingual edition |
| ISO 3857-2-1977 | 壓縮機、風動工具和風動機械 詞匯 第2部分:壓縮機 兩種語言版 | Compressors, pneumatic tools and machines; Vocabulary; Part II : Compressors Bilingual edition |
| ISO 3857-3-1989 | 壓縮機、風動工具和風動機械 詞匯 第3部分:風動工具和風動機械 兩種語言版 | Compressors, pneumatic tools and machines; vocabulary; part 3: pneumatic tools and machines |
| ISO 4229-1977 | 螺釘和螺母用裝配工具 開口為50mm～120mm的單頭扳手 | Assembly tools for screws and nuts; Single-head engineer's wrenches; Gaps from 50 to 120 mm |
| ISO 4510-1-1987 | 土方機械 維修工具 第1部分:一般維修和調整工具 | Earth-moving machinery; Service tools; Part 1 : Common maintenance and adjustment tools |
| ISO 4510-2-1996 | 土方機械 維修工具 第2部分:機械式拉拔器和推拔器 | Earth-moving machinery - Service tools - Part 2: Mechanical pullers and pushers |
| ISO 4957-1999 | 工具鋼 | Tool steels |
| ISO 5391-2003 | 風動工具和機器.詞匯 | Pneumatic tools and machines - Vocabulary |
| ISO 5393-1994 | 用于螺紋緊固件的回轉式氣動裝配工具 性能試驗方法 | Rotary tools for threaded fasteners - Performance test method |
| ISO 5949-1983 | 工具鋼和軸承鋼 用標準圖譜法評定碳化物分布的顯微照相法 | Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 603-16 Technical Corrigendum 1-1999 | 粘合磨料產品 尺寸 第16部分:手持動力工具的切削砂輪 技術勘誤1 | Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools; Technical Corrigendum 1 |
| ISO 603-16-1999 | 粘合磨料產品 尺寸 第16部分:手持動力工具的切削砂輪 | Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools |
| ISO 603-6 Technical Corrigendum 1-1999 | 粘合磨料產品 尺寸 第6部分:工具和工具室磨削用砂輪 技術勘誤1 | Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding; Technical Corrigendum 1 |
| ISO 603-6-1999 | 粘合磨料產品 尺寸 第6部分:工具和工具室磨削用砂輪 | Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding |
| ISO 6104-2005 | 超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語 | Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature |
| ISO 6544-1981 | 安裝螺紋緊固件用手持式氣動工具 扭矩反作用和扭矩沖擊測量 | Hand-held pneumatic assembly tools for installing threaded fasteners; Reaction torque and torque impulse measurements |
| ISO 6743-11-1990 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第11部分:P組(風動工具) | Lubricants, industrial oils and related products (class L); classification; part 11: family P (pneumatic tools) |
| ISO 6751-1998 | 模鑄工具 圓柱頭推桿 | Tools for moulding - Ejector pins with cylindrical head |
| ISO 6753-1-2005 | 沖壓和模鑄工具.機加工板.第1部分:沖壓工具的機加工板 | Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools |
| ISO 6753-2-1998 | 沖壓和模鑄工具 機加工板 第2部分:成型模機加工板 | Tools for pressing and moulding - Machined plates - Part 2: Machined plates for moulds |
| ISO 6787-2001 | 螺釘和螺母用裝配工具 活扳手 | Assembly tools for screws and nuts - Adjustable wrenches |
| ISO 6788-1997 | 螺釘和螺母用裝配工具 十字柄套筒扳手 尺寸和扭矩試驗 | Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test |
| ISO 6789-2003 | 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| ISO 691-2005 | 螺釘和螺母用裝配工具.扳手和套筒扳手的開口.常用公差 | Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use |
| ISO 7279-1984 | 承壓管用聚丙烯(PP)管件 用熱工具熔接的承口 公制系列 承口尺寸 | Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets |
| ISO 7388-1-2007 | 自動工具轉換用7/24錐度工具柄.第1部分:A、AD、 AF、 U、UD和UF型柄的尺寸和標志 | Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| ISO 7388-2-2007 | 自動工具轉換用7/24錐度工具柄.第2部分:J、JD和JF型柄的尺寸和標志 | Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF |
| ISO 7388-3-2007 | 自動工具轉換用7/24錐度工具柄.第3部分:AC、AD、 AF、 UC、UD、UF、JD和JF型柄保持按鈕 | Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
| ISO 7738-2001 | 螺釘和螺母用裝配工具 兩用扳手 扳手長度和頭部最小厚度 | Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads |
| ISO 7787-3-1991 | 牙科旋轉器械 切割工具 第3部分:技工室研磨機用硬質合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 8017-2007 | 模制工具.直的和帶肩導柱、帶肩定位導柱 | Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
| ISO 8018-2007 | 模制工具.有頭的導襯和有頭的定位導襯 | Tools for moulding - Guide bushes, headed, and locating guide bushes, headed |
| ISO 8020-2002 | 沖壓工具.有圓柱頭和直桿或者縮徑柄的沖頭 | Tools for pressing - Punches with cylindrical head and straight or reduced shank |
| ISO 8085-1-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第1部分：采用加熱工具的插口熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 1: Fittings for socket fusion using heated tools |
| ISO 8085-2 Technical Corrigendum 1-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第2部分：對熔接、采用加熱工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-2-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第2部分：對熔接、采用加熱工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| ISO 8404-2003 | 鑄模用工具.斜銷 | Tools for moulding - Angle pins |
| ISO 8405-1998 | 模鑄工具 圓柱頭推管 一般用途基本系列 | Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes |
| ISO 8406-2001 | 模鑄工具 成型模 圓形定位部件和定位架 | Tools for moulding - Mould bases - Round locating elements and spacers |
| ISO 8504-3-1993 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分:手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 8662-1-1988 | 便攜式手提動力工具 手柄振動測量 第1部分:總則 | Hand-held portable power tools; measurement of vibrations at the handle; part 1: general |
| ISO 8662-10-1998 | 便攜式手提動力工具 手柄振動測量 第10部分:沖剪和剪切 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears |
| ISO 8662-11 AMD 1-2001 | 便攜式手提動力工具 手柄振動測量 第11部分:接合件傳動工具 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools; Amendment 1 |
| ISO 8662-11-1999 | 便攜式手提動力工具 手柄振動測量 第11部分:接合件傳動工具 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools |
| ISO 8662-12-1997 | 便攜式手提動力工具 手柄振動測量 第12部分:往復式鋸和銼以及擺動或旋轉式鋸 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
| ISO 8662-13 Technical Corrigendum 1-1998 | 便攜式手提動力工具 手柄振動測量 第13部分:模具研磨機 技術勘誤1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders; Technical Corrigendum 1 |
| ISO 8662-13-1997 | 便攜式手提動力工具 手柄振動測量 第13部分:模具研磨機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders |
| ISO 8662-14-1996 | 便攜式手提動力工具 手柄振動測量 第14部分:采石工具和針束除銹機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers |
| ISO 8662-2 AMD 1-1999 | 便攜式手提動力工具 手柄振動測量 第2部分:鑿錘和鉚釘錘 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 1 |
| ISO 8662-2-1992 | 便攜式手提動力工具 手柄振動測量 第2部分:鑿錘和鉚釘錘 | Hand-held portable power tools; measurement of vibrations at the handle; part 2: chipping hammers and riveting hammers |
| ISO 8662-3 AMD 1-1999 | 便攜式手提動力工具 手柄振動測量 第3部分:巖石鉆頭和旋轉錘 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 1 |
| ISO 8662-3-1992 | 便攜式手提動力工具 手柄振動測量 第3部分:巖石鉆頭和旋轉錘 | Hand-held portable power tools; measurement of vibrations at the handle; part 3: rock drills and rotary hammers |
| ISO 8662-4-1994 | 便攜式手提動力工具 手柄振動測量 第4部分:磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders |
| ISO 8662-5 AMD 1-1999 | 便攜式手提動力工具 手柄振動測量 第5部分:施工用路面軋碎機和錘 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work; Amendment 1 |
| ISO 8662-5-1992 | 便攜式手提動力工具 手柄振動測量 第5部分:施工用路面軋碎機和錘 | Hand-held portable power tools; measurement of vibrations at the handle; part 5: pavement breakers and hammers for construction work |
| ISO 8662-6-1994 | 便攜式手提動力工具 手柄振動測量 第6部分:沖擊鉆 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills |
| ISO 8662-7-1997 | 便攜式手提動力工具 手柄振動測量 第7部分:具有沖擊、脈沖或棘輪作用力的扳手、螺絲刀和擰螺母機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, srewdrivers and nut runners with impact, impulse or ratched action |
| ISO 8662-8-1997 | 便攜式手提動力工具 手柄振動測量 第8部分:拋光機和旋轉式軌道和特殊軌道磨光機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders |
| ISO 8662-9-1996 | 便攜式手提動力工具 手柄振動測量 第9部分:汽錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers |
| ISO 8693-1998 | 模鑄工具 扁推桿 | Tools for moulding - Flat ejector pins |
| ISO 8694-1998 | 模鑄工具 有肩推桿 | Tools for moulding - Shouldered ejector pins |
| ISO 8695-1987 | 沖壓工具 沖床 沖頭和術語 兩種語言版 | Tools for pressing; Punches; Nomenclature and terminology Bilingual edition |
| ISO 8764-1-2004 | 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第1部分:驅動頭 | Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips |
| ISO 8764-2-2004 | 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第2部分:手動旋具刀身長度和標記的一般要求 | Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers |
| ISO 8977-2003 | 沖壓工具.沖模 | Tools for pressing - Matrixes |
| ISO 9141-3-1998 | 道路車輛 診斷系統 第3部分:車輛和OBDⅡ掃描工具之間通信的檢驗 | Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool |
| ISO 9181-2007 | 沖壓工具.60°圓錐頭的和縮徑的圓沖頭 | Tools for pressing - Round punches with 60° conical head and reduced shank |
| ISO 9183-1-1990 | 沖壓工具 沖壓模磨板 第1部分:A型 | Tools for pressing; wear plates for press dies; part 1: type A |
| ISO 9183-2-1993 | 沖壓工具 沖壓模磨板 第2部分:B型 | Tools for pressing; wear plates for press dies; part 2: type B |
| ISO 9449-2007 | 模制工具.定心套 | Tools for moulding - Centring sleeves |
| ISO/IEC 11581-5-2004 | 信息技術.用戶系統接口和符號.圖標符號和功能.第5部分:工具圖標 | Information technology - User system interfaces and symbols - Icon symbols and functions - Part 5: Tool icons |
| ISO/IEC 13719-1-1998 | 信息技術 可移植的公共工具環境(PCTE) 第1部分:抽象規范 | () |
| ISO/IEC 13719-2-1998 | 信息技術 可移植的公共工具環境(PCTE) 第2部分:C編程語言聯編 | () |
| ISO/IEC 13719-3-1998 | 信息技術 可移植的公共工具環境(PCTE) 第3部分:Ada編程語言聯編 | () |
| ISO/IEC 13719-4-1998 | 信息技術 可移植的公共工具環境(PCTE) 第4部分:IDL(接口定義語言)聯編 | () |
| ISO/IEC 14102-1995 | 信息技術 CASE工具的評價與選擇指南 | Information technology - Guideline for the evaluation and selection of CASE tools |
| ISO/IEC 14496-4 AMD 3-2005 | 信息技術.音視對象的編碼.第4部分:一致性試驗.修改件3:視頻新等級和工具 | Information technology - Coding of audio-visual objects - Part 4: Conformance testing; Amendment 3: Visual new levels and tools |
| ISO/IEC 14496-5 AMD 3-2003 | 信息技術.音頻-可視對象的編碼.第5部分:參考軟件.修改件3:新可視等級和工具 | Information technology - Coding of audio-visual objects - Part 5: Reference software; Amendment 3: Visual new level and tools |
| ISO/IEC 15444-9 AMD 1-2006 | 信息技術.JPEG2000圖像編碼系統.交互工具、應用程序接口和協議.第9部分:修改件1:應用程序接口、元數據和編 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols - Part 9: Amendment 1: API's, metadata, and editing |
| ISO/IEC 15444-9 Technical Corrigendum 1-2007 | 信息技術.JPEG 2000圖象編碼系統:交互式工具、應用程序接口和協議.技術勘誤1 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols; Technical Corrigendum 1 |
| ISO/IEC 15444-9-2005 | 信息技術.JPEG 2000圖像編碼系統.交互工具、應用程序接口和協議 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols |
| ISO/IEC 16500-7-1999 | 信息技術 通用數字音頻-可視系統 第7部分:基本安全工具 | Information technology - Generic digital audio-visual systems - Part 7: Basic security tools |
| ISO/IEC 18021-2002 | 信息技術.在客戶機/服務器模式中數據庫通信管理的移動工具用戶接口 | Information technology - User interfaces for mobile tools for management of database communications in a client-server model |
| ISO/IEC 18036-2003 | 信息技術.萬維網瀏覽器工具條用圖標符號和功能 | Information technology - Icon symbols and functions for World Wide Web browser toolbars |
| ISO/IEC TR 14471-2007 | 信息技術.軟件工程.CASE工具的采用指南 | Information technology - Software engineering - Guidelines for the adoption of CASE tools |
| ISO/IEC TR 21000-11-2004 | 信息技術.多媒體框架(MPEG-21).第11部分:持久相關技術的評價工具 | Information technology - Multimedia framework (MPEG-21) - Part 11: Evaluation Tools for Persistent Association Technologies |
| ISO/TR 27609-2007 | 手持工具的振動.研磨機振動測量方法.系列試驗評估 | Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test |
| ISO/TS 13399-100-2004 | 切削工具數據表示和交換.第100部分:參考字典的定義、原則和方法 | Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries |
| ISO/TS 13399-2-2005 | 切削工具數據表示和交換.第2部分:切削項目的參考字典 | Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items |
| ISO/TS 13399-3-2007 | 切削工具數據表示和交換.第3部分:工具項用參考字典 | Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items |
| ISO/TS 13399-4-2007 | 切削工具數據表示和交換.第4部分:自適應項的參考字典 | Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items |
| ISO/TS 13399-5-2007 | 切削工具數據表示和交換.第5部分:匯編詞條參考字典 | Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items |
| ISO/TS 13399-50-2007 | 切削工具數據表示和交換.第50部分:參考系統和一般概念用參考字典 | Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts |
| ISO/TS 13399-60-2007 | 切削工具數據表示和交換.第60部分:連接系統用參考字典 | Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems |
| ISO/TS 17104-2006 | 螺紋緊固件的旋轉刀具.液壓推動工具.性能試驗方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| ISO/TS 21108-2005 | 手持式動力工具.脈沖扳手.電插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| ISO/TS 28923-2007 | 農業機械.電力傳輸移動部件防護裝置.用工具開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool |
| ISO/TS 28924-2007 | 農業機械.電力傳輸移動部件防護裝置.不用工具開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool |
| 編號 | 中文名稱 | 英文名稱 |