| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60151-13-1966 | 電子管電性能的測量 第13部分:高真空電子管熱陰極發射電流的測量方法 | Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves |
| IEC 60151-23-1970 | 電子管電性能的測量 第23部分:真空脈沖調制管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurement of vacuum pulse modulator tubes and valves |
| IEC 60312-2007 | 家用真空吸塵器.性能測試方法 | Vacuum cleaners for household use - Methods of measuring the performance |
| IEC 60335-2-100-2002 | 家用和類似電器的安全.第2-100部分:手持式電動真空花園用鼓風機和真空鼓風機的特殊要求 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| IEC 60335-2-2 AMD 1-2004 | 家用和類似用途電器的安全.第2-2部分:真空吸塵器和吸水清潔設備的特殊要求.修改件1 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances; Amendment 1 |
| IEC 60335-2-2 AMD 2-2006 | 家用和類似電器.安全.第2-2部分:真空吸塵器和吸水式吸塵器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| IEC 60335-2-2 Edition 5.1-2004 | 家用和類似用途電器的安全.第2-2部分:真空吸塵器和吸水清潔電器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| IEC 60335-2-2 Edition 5.2-2006 | 家用和類似用途電器的安全.第2-2部分:真空吸塵器和吸水清潔電器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| IEC 60335-2-2-2003 | 家用和類似用途電器的安全.第2-2部分:真空吸塵器和吸水式清潔電器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| IEC 60335-2-69 AMD 1-2005 | 家用和類似用途電器.安全.第2-69部分:工業和商用帶電動刷的濕式和干式真空吸塵器的特殊要求.修改件1 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use; Amendment 1 |
| IEC 60335-2-69 Edition 3.1-2005 | 家用和類似用途電器的安全.第2-69部分:工業和商用帶電動刷的濕式和干式真空吸塵器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use |
| IEC 60704-2-1-2000 | 家用和類似用途電氣設備.測定空氣噪聲的試驗規程.第2-1部分:真空吸塵器的特殊要求 | Household and similar electrical applicances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners |
| ISO 10079-3-1999 | 醫療吸引設備 第3部分:真空或用壓力驅動吸引設備 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source |
| ISO 10086-2-2004 | 煤.選煤用絮凝劑評定方法.第2部分:旋轉式真空過濾系統中用作助濾劑的絮凝劑 | Coal - Methods for evaluating flocculants for use in coal preparation - Part 2: Flocculants as filter aids in rotary vacuum filtration systems |
| ISO 11424-1996 | 內燃機的空氣和真空系統用橡膠軟管及其管件 規范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| ISO 13710-2004 | 石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps |
| ISO 15364-2000 | 船舶與海上技術 散貨船真空/壓力閥 | Ships and marine technology - Pressure/vacuum valves for cargo tanks |
| ISO 15749-3-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.第3部分:真空系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems |
| ISO 1607-1-1993 | 容積真空泵 性能測量方法 第1部分:體積流速(抽速)的測量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed) |
| ISO 1607-2-1989 | 容積真空泵 性能測量方法 第2部分:極限壓力的測量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure |
| ISO 1608-1-1993 | 蒸氣真空泵 性能特性的測量 第1部分:體積流速(抽速)的測量 | Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed) |
| ISO 1608-2-1989 | 蒸氣真空泵 性能特性的測量 第2部分:臨界前級壓力的測量 | Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure |
| ISO 1609-1986 | 真空技術 法蘭尺寸 | Vacuum technology; Flange dimensions |
| ISO 16330-2003 | 往復式變?nèi)菡婵毡煤捅醚b置.技術要求 | Reciprocating positive displacement pumps and pump units - Technical requirements |
| ISO 1741-1980 | 葡萄糖 干燥后質量損失的測定 真空烘箱法 | Dextrose; Determination of loss in mass on drying; Vacuum oven method |
| ISO 1742-1980 | 葡萄糖漿 固體物質的測定 真空烘箱法 | Glucose syrups; Determination of dry matter; Vacuum oven method |
| ISO 20421-1 Technical Corrigendum 1-2007 | 低溫容器.大型可運輸真空隔熱容器.第1部分:設計、制作、檢驗和測試.技術勘誤1 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing; Technical Corrigendum 1 |
| ISO 20421-1-2006 | 低溫容器.大型可運輸真空隔熱容器.第1部分:設計、制作、檢測和試驗 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing |
| ISO 20421-2-2005 | 低溫容器.大型可運輸真空隔熱容器.第2部分:操作要求 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements |
| ISO 21009-2-2006 | 低溫容器.靜壓真空絕緣容器.第2部分:工作要求 | Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements |
| ISO 21029-1-2004 | 低溫容器.不超過1000升容量的可運輸真空絕緣容器.第1部分:設計、制造、檢驗和試驗 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests |
| ISO 21029-2-2004 | 低溫容器.不超過1000升容量的可運輸真空絕緣容器.第2部分:操作要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements |
| ISO 21358-2007 | 真空技術.直角閥.氣動執行器的尺寸和接口 | Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator |
| ISO 21360-2007 | 真空技術.測量真空泵性能的標準方法.一般描述 | Vacuum technology - Standard methods for measuring vacuum-pump performance - General description |
| ISO 2151-2004 | 聲學.壓縮機和真空泵的噪聲試驗規范.工程方法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
| ISO 2861-1-1974 | 真空技術 快卸連接 尺寸 第1部分:夾緊型 | Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type |
| ISO 2861-2-1980 | 真空技術 快卸連接 尺寸 第2部分:擰緊型 | Vacuum technology; Quick release couplings; Dimensions; Part 2 : Screwed type |
| ISO 3529-1-1981 | 真空技術 詞匯 第1部分:一般術語 三種語言版 | Vacuum technology; Vocabulary; Part 1 : General terms Trilingual edition |
| ISO 3529-2-1981 | 真空技術 詞匯 第2部分:真空泵和有關術語 三種語言版 | Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition |
| ISO 3529-3-1981 | 真空技術.詞匯.第3部分:真空計.三種語言版 | Vacuum technology; Vocabulary; Part 3 : Vacuum gauges Trilingual edition |
| ISO 3530-1979 | 真空技術 質譜儀型檢漏儀校準 | Vacuum technology; Mass-spectrometer-type leak-detector calibration |
| ISO 3669-1986 | 真空技術.超高真空法蘭.尺寸 | Vacuum technology; Bakable flanges; Dimensions |
| ISO 5302-2003 | 真空技術.渦輪分子泵.性能特征的測量 | Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics |
| ISO 7233-2006 | 橡膠和塑料軟管和軟管組件.耐真空性能測定 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum |
| ISO 7396-1-2007 | 醫用氣體管道系統.第1部分:壓縮的醫用氣體和真空用管道系統 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum |
| ISO 8028-1999 | 真空噴涂漆用橡膠和/或塑料軟管和軟管組件 規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification |
| ISO 9100-1-2005 | 玻璃容器.真空凸緣瓶口.第1部分:總則 | Glass containers - Vacuum lug finishes - Part 1: General |
| ISO 9100-10-2005 | 玻璃容器.真空凸緣瓶口.第10部分:普通規格77 | Glass containers - Vacuum lug finishes - Part 10: 77 regular |
| ISO 9100-11-2005 | 玻璃容器.真空凸緣瓶口.第11部分:普通規格82 | Glass containers - Vacuum lug finishes - Part 11: 82 regular |
| ISO 9100-12-2005 | 玻璃容器.真空凸緣瓶口.第12部分:普通規格89 | Glass containers - Vacuum lug finishes - Part 12: 89 regular |
| ISO 9100-13-2005 | 玻璃容器.真空凸緣瓶口.第13部分:普通規格100 | Glass containers - Vacuum lug finishes - Part 13: 100 regular |
| ISO 9100-14-2005 | 玻璃容器.真空凸緣瓶口.第14部分:普通規格110 | Glass containers - Vacuum lug finishes - Part 14: 110 regular |
| ISO 9100-2-2005 | 玻璃容器.真空凸緣瓶口.第2部分:中型33 | Glass containers - Vacuum lug finishes - Part 2: 33 medium |
| ISO 9100-3-2005 | 玻璃容器.真空凸緣瓶口.第3部分:普通規格38 | Glass containers - Vacuum lug finishes - Part 3: 38 regular |
| ISO 9100-4-2005 | 玻璃容器.真空凸緣瓶口.第4部分:中型38 | Glass containers - Vacuum lug finishes - Part 4: 38 medium |
| ISO 9100-5-2005 | 玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 | Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular |
| ISO 9100-6-2005 | 玻璃容器.真空凸緣瓶口.第6部分:普通規格53和58 | Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular |
| ISO 9100-7-2005 | 玻璃容器.真空凸緣瓶口.第7部分:深度為58 | Glass containers - Vacuum lug finishes - Part 7: 58 deep |
| ISO 9100-8-2005 | 玻璃容器.真空凸緣瓶口.第8部分:普通規格63、66和70 | Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular |
| ISO 9100-9-2005 | 玻璃容器.真空凸緣瓶口.第9部分:深度為63、66和70 | Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep |
| ISO 9170-1-1999 | 醫用氣體管道系統用終端設備 第1部分:供壓縮醫用設備和真空用的終端設備 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 9803-1-2007 | 真空技術.管道配件的安裝尺寸.第1部分:非刀口法蘭型 | Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type |
| ISO 9803-2-2007 | 真空技術.管道配件的安裝尺寸.第2部分:刀口法蘭型 | Vacuum technology - Mounting dimensions of pipeline fittings - Part 2: Knife-edge flange type |
| ISO/TS 3567-2005 | 真空計.同參考量規直接比較進行校準 | Vacuum gauges - Calibration by direct comparison with a reference gauge |
| ISO/TS 3669-2-2007 | 真空技術.超高真空法蘭.第2部分:刀口法蘭的尺寸 | Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges |
| 編號 | 中文名稱 | 英文名稱 |