| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B74.14-2007 | 氧化鋁磨粒與磨料的化學分析用方法 | Methods of Chemical Analysis of Aluminum Oxide Abrasive Grain and Abrasive Crude |
| ANSI C119.4-2004 | 電連接器.鋁-鋁或鋁-銅裸架空導線間使用的連接器 | Electric Connectors – Connectors for Use between Aluminum-to-Aluminum or Aluminum-to-Copper Bare Overhead Connectors |
| ANSI C119.6-2006 | 鋁和銅導線用額定電壓小于等于600V的非密封多端連接裝置 | Standard for Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors |
| ANSI C80.5-2005 | 電氣鋼性鋁導管(ERAC) | Electrical Rigid Aluminum Conduit (ERAC) |
| ANSI E1.2-2006 | 娛樂技術.鋁架和鋁塔的設計、制造和使用 | Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers |
| ANSI H35.1/H 35.1M-2006 | 鋁材的美國國家標準合金和回火名稱與符號注冊系統 | American National Standard Alloy and Temper Designation Systems for Aluminum |
| ANSI H35.2-2006 | 鋁軋制品(米制)的尺寸公差 | Dimensional Tolerances for Aluminum Mill Products |
| ANSI H35.2M-2006 | 鋁軋產品(米制)的尺寸公差 | Dimensional Tolerances for Aluminum Mill Products (Metric) |
| ANSI H35.3-1997 | 鋁硬化劑的命名體系 | Designation System for Aluminum Hardeners |
| ANSI H35.4-2006 | 非合金鋁的命名與符號系統 | Designation System for Unalloyed Aluminum |
| ANSI H35.5-1993 | 鋁金屬基體復合材料的命名體系 | Nomenclature System for Aluminum Metal Matrix Composite Materials |
| ANSI PH4.150-1986 | 攝影用化學藥品.十二水硫酸鋁鉀 | Photography (Chemicals) - Aluminum Potassium Sulfate, Dodecahydrate |
| ANSI PH4.154-1981 | 攝影用化學藥品.氯化鋁溶液 | Photographic Grade Aluminum Chloride Solution |
| ANSI PH4.155-1981 | 攝影用化學藥品.硫酸鋁溶液 | Photographic Grade Aluminum Sulfate Solution |
| ANSI/ANS 15.2-1999 | 片狀鋁鈾核燃料元件的質量控制 | Quality Control for Plate-Type Uranium-Aluminum Fuel Elements |
| ANSI/ASTM B603-2001 | 電加熱元件的拉伸或輥軋鐵鉻鋁合金規范 | Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements |
| ANSI/ASTM B669-1997 | 鍛造及壓模鑄用鋅鋁合金鑄錠規范 | Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings |
| ANSI/ASTM B750-1999 | 熱浸涂層鋅5%鋁混合稀土合金(UNS Z38510)鑄錠規范 | Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings |
| ANSI/ASTM B78-2001 | 鐵鎳鋁合金電加熱加速壽命試驗方法 | Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ANSI/ASTM B791-1997 | 鋅鋁合金鑄造和壓模鑄件規范 | Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings |
| ANSI/ASTM B865-1996 | 沉淀硬化鎳銅鋁合金(UNS N05500)棒材、桿材、線材、鍛件和鍛坯規范 | Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ANSI/ASTM B872-1996 | 沉淀硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板、薄板及帶材規范 | Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip |
| ANSI/ASTM B892-2001 | 壓模鑄造用鋅銅鋁鑄錠規范 | Specification for Zinc-Copper-Aluminum in Ingot Form for Die Castings |
| ANSI/ASTM B894-1999 | 鋅銅鋁合金壓模鑄件規范 | Specification for Zinc-Copper-Aluminum Alloy Die Castings |
| ANSI/ASTM D2809-1999 | 發動機冷卻劑對鋁泵的氣蝕和侵蝕特性測試方法 | Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants |
| ANSI/ASTM D2943-1996 | 1,1,1-三氯乙烷鋁劃痕試驗方法 | Test Method for Aluminum Scratch of 1,1,1-Trichloroethane |
| ANSI/ASTM D4340-1998 | 排熱條件下發動機冷卻劑鑄造鋁合金腐蝕性測試方法 | Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions |
| ANSI/ASTM D5184-2001 | 利用灰化熔化感應耦合等離子體原子發散光譜和原子吸收光譜測定燃料油中鋁和硅的方法 | Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry (05.03) |
| ANSI/ASTM D6353-2006 | 鋁生產中預焙陽極的取樣方案和芯取樣指南 | Guide for Sampling Plan and Core Sampling of Prebaked Anodes Used in Aluminum Production |
| ANSI/ASTM D6354-2004 | 用于鋁生產的碳陰極塊的取樣計劃和芯取樣的指南 | Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| ANSI/ASTM D6454-1998 | 鋁生產用碳極塊芯取樣和取樣方案指南 | Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| ANSI/ASTM F1281-2007 | 交聯聚乙烯/鋁/交聯聚乙烯(PEX-AL-PEX)壓力管規范 | Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ANSI/ASTM F1282-2005 | 聚乙烯/鋁/聚乙烯(PE-AL-PE)合成壓力管規范 | Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ANSI/ASTM F1974-2008 | 聚乙烯/鋁/聚乙烯和交聯聚乙烯/鋁/交聯聚乙烯復合壓力管用金屬內插配件用規范 | Specification for Metal Insert Fittings for Polyethylene/aluminum/polyethylene and Crosslinked Polyethylene/aluminum/crosslinked Polyethylene Composite Pressure Pipe |
| ANSI/ASTM F2262-2005 | OD可控的SDR9交聯聚乙烯/鋁/交聯聚乙烯管的規范 | Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 |
| ANSI/ASTM F2434-2008 | SDR9交聯聚乙烯(PEX)管道和SDR9交聯聚乙烯/鋁/交聯聚乙(PEX-AL-PEX)管道用卷制銅環的金屬插件規范 | Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing and SDR9 Cross-Linked Polyethylene/Aluminum/Cross-Linked Polyethylene (PEX-AL-PEX) Tubing |
| ANSI/AWS A5.10-1992 | 無藥皮鋁和鋁合金焊條和焊棒規范 | Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for |
| ANSI/AWS A5.10/A 5.10M-1999 | 裸鋁和鋁合金電焊條及焊條的規范 | Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.3/A 5.3M-1999 | 保護金屬電弧焊用鋁和鋁合金電極 | Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS B2.1.22-015-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格鋁(M-22或P-22)的鎢電極惰性氣體保護焊 | Standard Welding Procedure Specification – Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS C2.18-1993 | 鋁、鋅及其合金和復合物的帶有熱噴覆層的鋼的保護 | Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites |
| ANSI/AWS C2.23/C 2.23M-2003 | 鋁、鋅及其合金的熱噴鍍層(金屬化處理)和鋼防腐蝕保護復合材料的應用規范 | Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel |
| ANSI/AWS C3.7M/C 3.7-2005 | 鋁釬焊規范 | Specification for Aluminum Brazing |
| ANSI/AWS D1.2/D 1.2M-2008 | 結構焊接規則.鋁 | Structural Welding Code - Aluminum |
| ANSI/AWS D10.7M/D 10.7-2008 | 鋁和鋁合金管的氣體保護電弧焊用指南 | Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe |
| ANSI/AWS D3.7-2004 | 鋁制船體焊接指南 | Guide for Aluminum Hull Welding |
| ANSI/AWS D8.14M-2008 | 自動焊接質量規范.鋁弧焊 | Specification for Automotive Weld Quality - Arc Welding of Aluminum |
| ANSI/AWWA B403-2003 | 硫酸鋁.液體、沉積物或塊狀物 | Aluminum Sulfate – Liquid, Ground, or Lump |
| ANSI/AWWA B405-2006 | 鋁酸鈉 | Sodium Aluminate |
| ANSI/AWWA B408-2003 | 液態聚氯化鋁 | Liquid Polyaluminum Chloride |
| ANSI/AWWA C903-2005 | 給水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-鋁-聚乙烯和交聯聚乙烯-鋁-交聯聚乙烯復合壓力管 | Polyethylene-Aluminum-Polyethylene & Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) Through 2 In. (50 mm), for Water Service |
| ANSI/EIA 395-1-1975 | 長壽命(1型)和普通(2型)極化鋁的電解電容器 | Electrolytic Capacitors for Long Life, Type 1, and General Purpose Application, Type 2, Polarized Aluminum |
| ANSI/EIA-463-B-2003 | 重型(1型)和輕型(2型)交流電動機起動用固定鋁電解電容器 | Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum |
| ANSI/EIA-956-2006 | 帶聚合物陰極的鋁電解集成電容器 | Aluminum Electrolytic Chip Capacitor with Polymer Cathode |
| ANSI/I3A IT4.154-2006 | 化學處理.氯化鋁溶液規范 | Processing Chemicals - Specifications for Aluminum Chloride Solution |
| ANSI/IEEE 635-2003 | 電力電纜鋁護套的選擇和設計指南 | Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| ANSI/NECA 102-2004 | 安裝鋁導管 | Installing Aluminum Conduits |
| ANSI/NECA 104-2006 | 安裝鋁建筑電線和電纜的推薦規程 | Recommended Practice for Installing Aluminum Building Wire and Cable |
| ANSI/PIMA IT4.155-1981 | 攝影級硫酸鋁溶液 | Photography (Chemicals) – Aluminum Sulfate Solution |
| ANSI/SCTE 100-2004 | 75 Ohm平滑鋁制用戶接入電纜規范 | Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable |
| ANSI/UL 486E-2000 | 鋁和/或銅導線使用的設備配線終端 | Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors |
| ANSI/UL 6A-2008 | 電器用剛性金屬導管.鋁、青銅及不銹鋼 | Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel (Proposal dated 5-9-08) |
| ANSI/UL 6Aa-2003 | 電器用剛性金屬導管.鋁、青銅及不銹鋼 | Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel |
| ANSI/UL 797A-2007 | 電氣金屬管件.鋁 | Electrical Metallic Tubing - Aluminum (Proposal dated 6-8-07) |
| ASME B31.3 Cases NO. 2-1993 | 壓力管道用套管規程.套管141:在ANSI/ASME B 31.3管道標準中鋁合金法蘭的使用規則 | (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping) |
| ASTM A1002-1999(2003) | 鎳鋁有序合金鑄件的標準規范 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
| ASTM A491-2007 | 鍍鋁鋼鏈環欄柵結構的標準規范 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM A925-2003 | 地面架空線用鋅-5%鋁-鈰合金涂覆鋼絞線的標準規范 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
| ASTM B137-1995(2004) | 陽極鍍鋁層重量測定的標準試驗方法 | Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum |
| ASTM B148-1997(2003)e1 | 鋁青銅砂型鑄件標準規范 | Standard Specification for Aluminum-Bronze Sand Castings |
| ASTM B179-2006 | 全鑄造工藝的鑄錠和熔融成形鑄件中鋁合金的標準規范 | Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes |
| ASTM B209-2007 | 鋁和鋁合金薄板材和板材的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B209M-2007 | 鋁和鋁合金薄板材和板材(米制)的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric] |
| ASTM B210-2004 | 拉制無縫鋁和鋁合金管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
| ASTM B210M-2005 | 拉制鋁和鋁合金無縫管的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric] |
| ASTM B211-2003 | 鋁及鋁合金棒材、條材和線材標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire |
| ASTM B211M-2003 | 鋁及鋁合金棒材、條材和線材(米制)標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] |
| ASTM B221M-2007 | 鋁和鋁合金擠壓棒材、桿材、線材、型材和管材用標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric] |
| ASTM B233-1997(2007) | 電氣用拉制鋁1350條標準規范 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| ASTM B234-2004 | 冷凝器及熱交換器用鋁和鋁合金拉制無縫管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers |
| ASTM B234M-2004 | 冷凝器及熱交換器用鋁和鋁合金拉制無縫管的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric] |
| ASTM B236-2007 | 電氣用鋁棒(匯流條)的標準規范 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B236M-2007 | 電氣用鋁匯流條的標準規范(母線)(米制系列) | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| ASTM B240-2007 | 鑄造和壓模鑄件用鑄錠結構中鋅和鋅鋁(ZA)合金的標準規范 | Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings |
| ASTM B244-1997(2002) | 用渦流儀器測量鋁陽極鍍層及其它非磁性基底金屬絕緣鍍層的厚度標準試驗方法 | Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments |
| ASTM B247-2002a | 鋁和鋁合金壓模鍛件、手工鍛件和軋制環形鍛件的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B247M-2002a | 鋁和鋁合金壓模鍛件、手工鍛件和軋制環形鍛件的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric] |
| ASTM B253-1987(2005)e1 | 電鍍用鋁合金的制備標準指南 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| ASTM B279-2004 | 制造磁導線用方形和矩形軟裸銅線及鋁線硬度的標準測試方法 | Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication |
| ASTM B324-2001(2007) | 電氣用矩形和方形鋁線標準規范 | Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ASTM B373-2000(2006) | 電容器用鋁箔標準規范 | Standard Specification for Aluminum Foil for Capacitors |
| ASTM B401-2004 | 致密圓形鋼芯加強同心絞捻鋁導線(ACSR/COMP)標準規范 | Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
| ASTM B415-1998(2007) | 硬拉包鋁鋼絲標準規范 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
| ASTM B416-1998(2007) | 同心絞捻包鋁鋼導線標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors |
| ASTM B449-1993(2004) | 鋁的鉻酸鹽處理標準規范 | Standard Specification for Chromates on Aluminum |
| ASTM B479-2006 | 與食品接觸的和其它用途的撓性包裝材料用退火鋁及鋁合金箔標準規范 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications |
| ASTM B502-2002(2007) | 包鋁鋼芯加強的鋁導線用包鋁鋼芯線的標準規范 | Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced |
| ASTM B546-2004 | 電熔焊接鎳鉻鈷鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330和UNS N08332)、鎳鉻鐵鋁合金(UNS N06603)、鎳 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM B548-2003 | 壓力容器用鋁合金板的超聲波檢驗的標準試驗方法 | Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
| ASTM B549-2004 | 包鋁鋼芯加強的同心絞捻鋁導線(ACSR/AW)標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW) |
| ASTM B557-2006 | 鍛造和鑄造的鋁及鎂合金制品的抗拉試驗的標準試驗方法 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM B557M-2007e1 | 鍛造和鑄造鋁合金和鎂合金制品的抗拉測試的標準試驗方法(米制) | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric] |
| ASTM B565-2004 | 鋁和鋁合金鉚釘及冷鐓頭絲與棒材的剪切試驗的標準試驗方法 | Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods |
| ASTM B566-2004a | 包銅鋁絲標準規范 | Standard Specification for Copper-Clad Aluminum Wire |
| ASTM B580-1979(2004) | 鋁陽極氧化鍍層 | Standard Specification for Anodic Oxide Coatings on Aluminum |
| ASTM B592-2001(2006) | 銅鋅鋁鈷合金、銅鋅錫鐵板、薄板、帶材及軋制的棒材標準規范 | Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B594-2006 | 航空設備用鋁合金鍛制品超聲波檢驗的標準實施規程 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications |
| ASTM B595-1995(2006) | 燒結鋁結構部件標準規范 | Standard Specification for Sintered Aluminum Structural Parts |
| ASTM B603-2007 | 電熱元件用拉制或軋制鐵-鉻-鋁合金的標準規范 | Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements |
| ASTM B645-2007 | 鋁合金線性彈性平面應變斷裂韌性測試的標準實施規程 | Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys |
| ASTM B646-2006a | 鋁合金斷裂韌性試驗的標準實施規程 | Standard Practice for Fracture Toughness Testing of Aluminum Alloys |
| ASTM B647-1984(2006) | 用維氏硬度儀測定鋁合金壓痕硬度的試驗方法 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM B648-1978(2006) | 用巴氏壓痕儀測定鋁合金壓痕硬度的標準試驗方法 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B680-1980(2004) | 用酸溶解法測定鋁的陽極鍍層封閉質量的試驗方法 | Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution |
| ASTM B711-2005 | 同心絞捻鋁合金鋼芯導線(AACSR)(6201)的標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201) |
| ASTM B724-2000(2006) | 用新式輕便非卡尺型儀器測量鋁合金壓痕硬度的標準試驗方法 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument |
| ASTM B736-2000(2006) | 鋁、鋁合金和鋁包層鋼電纜屏蔽材料標準規范 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B769-2007 | 鋁合金的剪切測試用標準試驗方法 | Standard Test Method for Shear Testing of Aluminum Alloys |
| ASTM B778-2002(2007) | 成形線狀致密同芯絞捻鋁導線(AAC/TW)標準規范 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW) |
| ASTM B779-2003 | 鋼筋加強的異型鋼絲致密同芯絞捻鋁導線標準規范 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) |
| ASTM B78-1990(2007) | 電加熱用鐵鉻鋁合金的加速壽命的試驗方法 | Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ASTM B800-2005 | 電氣用退火及中溫回火8000系列鋁合金線的標準規范 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers |
| ASTM B801-2007 | 隨后涂層或絕緣用8000系列鋁合金同心式絞捻導線用標準規范 | Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
| ASTM B831-2005 | 薄鋁合金制品剪切試驗的標準試驗方法 | Standard Test Method for Shear Testing of Thin Aluminum Alloy Products |
| ASTM B836-2000(2005) | 使用單輸入線路結構的致密圓鋁絞接導線的標準規范 | Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B856-2003 | 鍍覆鋼支持的同心鋪設鋁絞線標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B857-2002 | 鍍覆鋼支持的成型鋼絲壓縮同心鋪設鋁絞線標準規范 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| ASTM B865-2004 | 沉淀硬化鎳銅鋁合金(UNS N05500)棒材、桿材、線材、鍛件和鍛坯的標準規范 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM B871-2001(2007) | 鋁合金產品撕裂測試的標準試驗方法 | Standard Test Method for Tear Testing of Aluminum Alloy Products |
| ASTM B881-2005 | 鋁和鎂合金產品的相關標準術語 | Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products |
| ASTM B892-2003 | 壓模鑄造用鋅銅鋁合金錠標準規范 | Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings |
| ASTM B894-2003 | 鋅銅鋁合金壓鑄件標準規范 | Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings |
| ASTM B901-2004 | 用單輸入金屬線結構的壓縮圓形鋁絞線的標準規范 | Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B909-2000(2006) | 非應力消除鋁制品的平面應力斷裂強度試驗的標準導則 | Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
| ASTM B918-2001 | 鍛造鋁合金的熱處理的標準實施規程 | Standard Practice for Heat Treatment of Wrought Aluminum Alloys |
| ASTM B926-2003 | 用燈標表測定鋁及鋁合金平箔中氣泡的標準方法 | Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table |
| ASTM B941-2005 | 電工用耐熱鋁鋯合金絲的標準規范 | Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
| ASTM B945-2006 | T1、T2、T5、和T10型回火產品的梯度溫度成形加工的冷擠壓鋁合金的標準規范 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers |
| ASTM B947-2006 | 鋁合金厚板用熱軋鋼機溶解熱處理的標準實施規范 | Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate |
| ASTM C1031-2005 | 核純級的氧化鋁粉末的標準規范 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
| ASTM C1070-2001(2007) | 用激光擴散法測定氧化鋁和石英粒度分布的試驗方法 | Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
| ASTM C1431-1999(2005) | 維護容器清理用鋁基廢核燃料腐蝕檢驗的標準導則 | Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal |
| ASTM C1655-2006 | 耐火土和高鋁砂漿的標準分類 | Standard Classification of Fireclay and High-Alumina Mortars |
| ASTM C181-2003 | 耐火粘土和高鋁塑性耐火材料可加工性指數的標準試驗方法 | Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories |
| ASTM C703-1972(2006) | 鋁制搪瓷涂層的抗脫落試驗方法 | Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum |
| ASTM C784-2005 | 核純級的氧化鋁、碳化硼復合丸料的標準規范 | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
| ASTM C809-1994(2007) | 核純級氧化鋁和氧化鋁-碳化硼復合丸狀材料化學、質譜和光譜化學分析的標準試驗方法 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets |
| ASTM D1730-2003 | 涂漆用鋁和鋁合金表面預處理標準實施規范 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D1731-2003 | 涂漆用熱浸鋁表面預處理標準實施規范 | Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting |
| ASTM D2674-1972(2004)e1 | 鋁表面準備用硫代鉻酸鹽蝕刻溶液分析的標準試驗方法 | Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
| ASTM D2809-2004e2 | 帶有發動機冷卻劑的鋁泵的氣蝕和侵蝕特性的標準試驗方法 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D2824-2006 | 無纖維增強、石棉纖維增強和無石棉的纖維增強的填充鋁顏料的瀝青屋面涂層標準規范 | Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D2943-2002(2007) | 測定穩定性用1,1,1-三氯乙烷的鋁刮痕標準試驗方法 | Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability |
| ASTM D3260-2001(2005) | 適用于工廠的壓制鋁制品透明涂層的耐酸和耐灰漿標準試驗方法 | Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D3610-2000(2004) | 電位滴定法測定氧化鋁基鈷-鉬催化劑中總鈷含量的標準試驗方法 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM D3762-2003 | 用膠粘劑粘結的鋁表面耐久性的標準試驗方法(楔入試驗) | Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
| ASTM D3805-1997(2003)e1 | 填充鋁顏料的瀝青屋頂涂料的涂覆的標準指南 | Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings |
| ASTM D3933-1998(2004) | 結構膠粘劑粘結鋁表面處理的實施規程(磷酸陰極氧化處理) | Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
| ASTM D3943-2004 | 新制氧化鋁基催化劑中總鉬量的標準試驗方法 | Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts |
| ASTM D4340-1996(2007) | 在排熱條件下發動機冷卻劑對鑄造鋁合金腐蝕性的標準試驗方法 | Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions |
| ASTM D4481-2004 | 新制氧化鋁基催化劑中總鎳含量的標準試驗方法 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM D4926-2006 | 用X-射線粉末衍射法對觸煤劑中含硅和鋁礬土的觸煤劑中伽馬鋁礬土含量的試驗方法 | Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction |
| ASTM D5184-2001(2006) | 通過灰化、熔融、感應耦合等離子體原子放射分光光度法和原子吸收分光光譜法測定燃料油中鋁和硅的標準試驗方 | Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
| ASTM D5502-2000(2005) | 通過鋁工業生產的陽極和陰極碳物理測量確定表觀密度的標準試驗方法 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ASTM D6208-2007 | 用恒電流測量鋁及其合金的再鈍化電位的標準試驗方法 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D6353-2006 | 鋁生產用預焙陽極的取樣計劃和芯取樣的標準指南 | Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production |
| ASTM D6356-1998(2004) | 用作屋頂防護涂層的鋁乳化瀝青的氫氣體產生的標準試驗方法 | Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D6492-1999(2003) | 鋅及鋅/鋁合金涂覆鋼上六價鉻檢測的標準實施規程 | Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel |
| ASTM D6848-2002 | 用作屋頂防護層的鋁著色乳化瀝青的標準規范 | Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D857-2007 | 水中鋁含量的標準試驗方法 | Standard Test Method for Aluminum in Water |
| ASTM E1251-2007 | 用原子發射光譜法分析鋁和鋁合金的標準試驗方法 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry |
| ASTM E127-2007 | 標準鋁合金塊的制造及超聲波檢驗的標準操作規程 | Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks |
| ASTM E155-2005 | 鋁和鎂鑄件檢驗用標準基準射線照相術 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| ASTM E1637-1998(2003) | 結構固定接縫鋁屋頂鑲板系統的標準規范 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E1648-1995(2006) | 用于檢驗焊接中鋁的標準參考射線照片 | Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
| ASTM E1652-2003 | 金屬外殼的鉑電阻溫度表、基金屬熱電耦和貴金屬溫差熱電偶制造中使用的氧化鎂和氧化鋁粉末及壓扁絕緣子的標 | Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples |
| ASTM E1793-2005 | 連入泡沫和梁型可移動遮蔽物的鋁合金制備的標準實施規程 | Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
| ASTM E1801-2003 | 泡沫和梁型遮蓋物用鋁飾面板的粘結性的測定的標準實用規程 | Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
| ASTM E1826-2005 | 鋁合金粘結用低揮發性有機化合物耐腐蝕粘合底漆的標準規范 | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
| ASTM E215-1998(2004)e1 | 無縫鋁合金管的電磁檢驗用的標準化設備 | Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E2422-2005 | 檢驗鋁鑄件的標準數字參考圖像 | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E266-2007 | 用鋁的放射性測量快速中子反應速率的標準試驗方法 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM E34-1994(2002) | 鋁和鋁基合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys |
| ASTM E505-2001(2006) | 鋁和鎂壓模鑄件檢驗用標準參考射線照相 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| ASTM E539-2007 | 6鋁4釩鈦合金的X射線熒光光譜測定分析用標準試驗方法 | Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy |
| ASTM E607-2002 | 在氮氣芬圍中用點對面技術作鋁合金的原子輻射光譜測定分析的標準試驗方法 | Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere |
| ASTM E716-1994(2002) | 光譜化學分析用鋁和鋁合金取樣 | Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis |
| ASTM E738-2000(2005) | 用絡合滴定法測定鐵礦石和有關材料中鋁含量的標準試驗方法 | Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration |
| ASTM E866-2005 | 蜂窩狀保護板中粘結鋁合金用耐腐蝕粘合底漆的標準規范 | Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E874-2004 | 保護板用非金屬蜂窩狀芯體鋁蓋面的粘合劑粘結標準規程 | Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels |
| ASTM F1136-2004 | 緊固件用鋅/鋁防蝕鍍層的標準規范 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
| ASTM F1136M-2004 | 緊固件的抗鋅/鋁腐蝕涂層的標準規范(米制) | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] |
| ASTM F1183-1996(2006) | 鋁合金鏈環柵欄結構 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F1281-2007 | 交聯聚乙烯/鋁/交聯聚乙烯(PEX-AL-PEX)壓力管的標準規范 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ASTM F1282-2006 | 聚乙烯/鋁/聚乙烯(PE-AL-PE)復合材料壓力管的標準規范 | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM F1295-2005 | 外科植入設備用鍛制鈦-6鋁-7鈮合金的標準規范 | Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM F1428-1992(2005) | 緊固件用非有機頂涂層,防腐蝕涂層的鋁顆粒填充底涂層/有機物 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM F1513-1999(2003) | 電子薄膜器件用純鋁(非合金)原材料標準規范 | Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications |
| ASTM F1580-2007 | 外科植入物覆層用鈦和鈦-6鋁-4釩合金粉末的標準規范 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F1594-1995(2003) | 真空鍍膜用純鋁(未摻雜質)原材料標準規范 | Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications |
| ASTM F2146-2007 | 外科移植物用鍛造鈦-3鋁-2.5釩合金無縫管的標準規范(UNS R56320) | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F2262-2005 | 交聯聚乙烯/鋁/交聯聚乙烯管OD控制的SDR9的標準規范 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 |
| ASTM F487-1988(2006) | 純鋁-半導體引線連接用1%硅細絲 | Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding |
| ASTM F603-2000 | 外科植入用高純度密實氧化鋁的標準規范 | Standard Specification for High-Purity Dense Aluminum Oxide for Surgical Implant Application |
| ASTM F7-1995(2006) | 氧化鋁粉末 | Standard Specification for Aluminum Oxide Powder |
| ASTM F901-2001(2007) | 鋁制傳送塔螺栓和螺母標準規范 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM G103-1997(2005) | 在6%沸騰的氯化鈉溶液中進行鋁鋅鎂低銅合金的應力腐蝕斷裂試驗的標準實施規程 | Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution |
| ASTM G110-1992(2003)e1 | 將鋁合金浸入氯化鈉和過氧化氫溶液中進行熱處理時抗晶粒間腐蝕的評定 | Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
| ASTM G112-1992(2003) | 進行鋁合金的剝離腐蝕試驗 | Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys |
| ASTM G139-2005 | 用破壞載荷法測定可熱處理鋁合金制品的抗應力腐蝕開裂特性的標準試驗方法 | Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method |
| ASTM G34-2001(2007) | 2XXX和7XXX系列鋁合金剝落腐蝕敏感性的試驗方法(EXCO 試驗) | Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
| ASTM G47-1998(2004) | 測定高強度鋁合金制品應力腐蝕斷裂敏感性的標準試驗方法 | Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products |
| ASTM G64-1999(2005) | 熱處理鋁合金抗應力腐蝕斷裂性的標準分類 | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys |
| ASTM G66-1999(2005)e1 | 5XXX系列鋁合金的剝落腐蝕敏感性的外觀評定的試驗方法(ASSET試驗) | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| ASTM G67-2004 | 用接觸硝酸環境之后的重量損失來測定5XXX系列鋁合金晶間腐蝕敏感性的標準試驗方法(NAMLT 試驗) | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| ASTM G69-1997(2003) | 測定鋁合金潛在腐蝕性 | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| IEEE 635-1989 | 電力電纜鋁護套的選擇和設計指南 | (Guide for selection and design of aluminium sheaths for power cables) |
| UL 1567-1998 | 鋁線用插座和開關 | (Receptacles and switches intended for use with aluminium wire ) |
| UL 486B-1997 | 鋁導線用接線器 | (Wire connectors for use with aluminium conductors ) |
| UL 486E-1994 | 鋁和/或銅導線用設備布線終端 | (Equipment wiring terminals for use with aluminium and/or copper conductors ) |
| UL 6A-2000 | 硬金屬導管.鋁、青銅和不銹鋼 | (Rigid metal conduit - Aluminium, bronze and stainless steel ) |
| UL 797A-2000 | 電力金屬管.鋁 | (Electrical metallic tubing - Aluminium ) |
| 編號 | 中文名稱 | 英文名稱 |