| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1659-1950 | 鐵路信號用牽引電樞直流中性線撥軌繼電器和線路繼電器規范 | Specification for tractive armature direct current neutral track and line relays for railway signalling |
| BS 2G 114-1953 | 飛行器用直流電流比率指示儀規范 | Specification for direct current ratiometer indicators for aircraft |
| BS 2G 134-1970 | 直流發電機規范 | Specification for d.c. generators |
| BS 2G 143-1965 | 飛行器用交流和直流旋轉式和直線式執行機構規范 | Specification for a.c. and d.c. rotary and linear actuators for aircraft |
| BS 2G 146-1966 | 飛行器用直流電動機規范 | Specification for d.c. motors for aircraft |
| BS 2G 202-1988 | 直流和低頻交流用安裝在機體上的電連接器的設計和性能要求規范 | Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications |
| BS 519-1950 | 鐵路信號用牽引電樞直流中性極化線路繼電器規范 | Specification for tractive armature direct current neutral-polar line relays for railway signalling |
| BS 5424-3-1988 | 電壓小于等于交流1000V及直流1200V的控制設備規范.第3部分:須經認證的連接器附加要求 | Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Additional requirements for contactors subject to certification |
| BS 5529-1988 | 工業用低壓開關設備和控制裝置規范.A型、直流用、3或4個接頭的近距離電感開關 | Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals |
| BS 5654-1-1979 | 直流輸出穩壓電源.第1部分:術語定義 | Stabilized power supplies, d.c. output - Terms and definitions |
| BS 5654-4-1979 | 直流輸出穩壓電源.第4部分:除射頻干擾外的檢驗 | Stabilized power supplies, d.c. output - Tests other than radio-frequency interference |
| BS 5683-1988 | 工業用低壓開關設備和控制裝置規范.C型直流用3或4引線感應式近距離開關 | Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form C, for direct current, 3 or 4 terminals |
| BS 5684-1988 | 工業用低壓開關設備和控制裝置規范.D型直流用3或4引線感應式近距離開關 | Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form D, for direct current, 3 or 4 terminals |
| BS 5704-1979 | 數字電子直流電壓表與直流電子模擬－數字直流轉換器性能規定方法 | Method for specifying the performance of digital electronic d. c. voltmeters and d.c. electronic analogue-to-digital convertors |
| BS 5863-1-1984 | 過程控制系統模擬信號.第1部分:直流信號規范 | Analogue signals for process control systems - Specification for direct current signals |
| BS 5863-2-1980 | 過程控制系統模擬信號.第2部分:直流電壓信號規范 | Analogue signals for process control systems - Specification for direct voltage signals |
| BS 6182-1-1994 | 煤礦用固有安全電源.第1部分:直流電源規范 | Intriniscally safe power supplies for use in coal mines - Specification for d.c. power supplies |
| BS 6227-1988 | 工業用低壓開關設備和控制裝置規范.A型直流雙引線感應式近距離開關 | Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 2 terminals |
| BS 6328-3-1983 | 英國通信網家用線路連接設備.第3部分:直流電路連接裝置規范 | Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to direct current circuits |
| BS 646-1958 | 交流和直流供電用管狀熔斷體(額定電流為5A及其以下)規范 | Specification. Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service |
| BS 6910-2-1989 | 電壓范圍為交流1000V和直流1500Vd.c.的低溫澆注樹脂復合物和熱縮電纜接頭.第2部分:現場安裝實用規程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 7194-1990 | 數字顯示用直流低頻電子測量?jī)x器規范 | Specification for direct-current and low-frequency electronic measuring instruments with a digital display |
| BS 7744-1994 | 直流電流系統用高電壓絕緣子的人工污染度試驗指南 | Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems |
| BS 8020-2002 | 帶電作業用工具.電壓交流1000V或直流1500V及以下的導電軌道系統或其附近工作時使用的絕緣手工工具 | Tools for live working - Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c |
| BS 9070-6-1971 | 經質量評估的固定式電容器規范.一般數據和試驗方法.第6節:直流用聚碳酸酯介質電容器和聚乙烯對苯二甲酸酯介 | Specification for fixed capacitors of assessed quality: generic data and methods of test - Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use |
| BS 9520-1983 | 經質量評定的直流和低頻用途電連接器:一般數據、試驗方法和性能鑒定程序 | Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures |
| BS 9522 N0001-1982 | 直流和低頻用多觸頭圓形電氣連接件詳細規范、帶有前面可釋放后面可拆卸的壓接觸點卡口接頭.全面評估級 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level |
| BS 9522 N0003-1990 | 直流和低頻用多觸點圓形電氣連接器詳細規范.帶后可插入、后釋放、后可拆卸壓接觸點的無檔板密封、耐環境影 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment |
| BS 9522-1990 | 經質量評估的直流和低頻用圓形連接器詳細規范的制定規則.全面、基本和全面加機體評估級 | Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications - Full, basic and full plus airframe assessment levels |
| BS 9523-1984 | 直流和低頻用經質量評估的整體金屬殼矩形電氣連接器詳細規范的制定規則.全面和基本評估級 | Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications - Full and basic assessment levels |
| BS 9524-1984 | 直流和低頻用經質量評估的模壓體矩形電氣連接器詳細規范的制定規則.全面和基本評估級 | Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment levels |
| BS 9525-1984 | 直流和低頻用經質量評定的雙件式印制電路板插接件和轉接裝置詳細規范的編制規則.全面和基本評定級 | Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and basic assessment levels |
| BS CECC 30401 023-1979 | 固定式金屬化聚乙烯對苯二酸鹽薄膜介質直流電容器協調詳細規范.矩形絕緣金屬外殼、剛性徑向終端.全面評估級 | Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level |
| BS CECC 30401 033-1981 | 固定式金屬化聚乙烯對苯二酸鹽薄膜介質直流電容器詳細規范(長壽命).剛性徑向矩形非金屬絕緣殼體.全面評定級 | Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (long-life grade) - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level |
| BS CECC 30401-1985 | 電子元器件用質量評估協調體系規范.空白詳細規范:固定式金屬化聚乙烯-對苯二酸鹽薄膜介質直流電容器 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors |
| BS DD CLC/TS 50457-1-2008 | 電動車輛的傳導充電.直流充電站 | Conductive charging for electric vehicles - D.C. charging station |
| BS DD IEC/PAS 62344-2007 | 高壓直流電(HVDC)連接(NPPAS)用地面電極設計的通用指南 | General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS) |
| BS DD IEC/PAS 62543-2009 | 電壓源換相直流輸電 | DC transmission using voltage sourced converters |
| BS DD IEC/PAS 62544-2008 | 高壓直流輸電設施中有源濾波器 | Active filters in HVDC applications |
| BS EN 130502-1998 | 電子元器件質量評定協調體系.空白詳細規范.金屬多碳膜介質直流固定電容器.評定等級 EZ | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ |
| BS EN 131700-1998 | 電子元器件質量評定協調體系.分規范:直流電流用有薄層金屬箔和聚碳酸酯薄膜電介質電極的固定電容器. | Harmonized system of quality assessment for electronic components - Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric |
| BS EN 131701-1998 | 電子元件質量評定協調體系.空白詳細規范:有薄層金屬箔和聚碳酸酯薄膜電介質電極的直流固定電容器.評估等級E | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level E |
| BS EN 131702-1998 | 電子元器件質量評定協調體系.空白詳細規范:直流電流用有薄層金屬箔和聚碳酸酯薄膜電介質電極的固定電容器. | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level EZ |
| BS EN 1648-1-2005 | 休閑旅居車輛.12V直流超低壓電器裝置.旅居掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Caravans |
| BS EN 1648-2-2005 | 休閑旅居車輛.12V直流超低壓電器裝置.機動旅居掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Motor caravans |
| BS EN 2349-306-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第306部分:交直流負荷 | Aerospace series — Requirements and test procedures for relays and contactors — Part 306: Overload d.c. and a.c. |
| BS EN 50122-2-1999 | 鐵路設施.固定設備.直流牽引系統引起的雜散電流效應保護措施 | Railway applications - Fixed installations - Protective provisions against the effects of stray currents caused by d.c. traction systems |
| BS EN 50123-1-2003 | 鐵路設施.固定設備.直流開關裝置.總則 | Railway applications - Fixed installations - D.C. switchgear - General |
| BS EN 50123-2-2003 | 鐵路設施.固定設備.直流開關裝置.直流斷路器 | Railway applications - Fixed installations - D.C. switchgear - D. C. circuit breakers |
| BS EN 50123-3-2003 | 鐵路設施.固定設備.直流開關裝置.室內直流切斷開關、負荷開關和接地開關 | Railway applications - Fixed installations - D.C. switchgear - Indoor d.c. disconnectors, switch-disconnectors and earthing switches |
| BS EN 50123-4-2003 | 鐵路設施.固定設備.直流開關裝置.室外直流切斷開關、負荷開關和接地開關 | Railway applications - Fixed installations - D.C. switchgear - Outdoor d.c. disconnectors, switch-disconnectors and earthing switches |
| BS EN 50123-5-2003 | 鐵路設施.固定設備.直流開關裝置.直流系統中特殊應用的電涌放電器和低電壓限制器 | Railway applications - Fixed installations - D.C. switchgear - Surge arresters and low-voltage limiters for specific use in d.c. systems |
| BS EN 50123-6-2003 | 鐵路設施.固定設備.直流開關裝置.直流開關裝置組件 | Railway applications - Fixed installations - D.C. switchgear - D. C. switchgear assemblies |
| BS EN 50123-7-1-2003 | 鐵路設施.固定設備.直流開關設備.直流牽引系統專用測量、控制與保護裝置.應用指南 | Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| BS EN 50123-7-2-2003 | 鐵路設施.固定設備.直流開關裝置.直流牽引系統專用測量、控制和保護設備.絕緣電流傳感器和其他電流測量設備 | Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| BS EN 50123-7-3-2003 | 鐵路設施.固定設備.直流開關裝置.直流牽引系統專用測量、控制和保護設備.絕緣電壓傳感器和其他電壓測量設備 | Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| BS EN 50162-2005 | 直流系統中雜散電流引起腐蝕的防護 | Protection against corrosion by stray current from direct current systems |
| BS EN 50227-1999 | 控制電路裝置和開關元件鄰近傳感器、鄰近傳感器和開關放大器用直流接口 | Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR) |
| BS EN 50289-1-2-2001 | 通信電纜.試驗方法規范.電氣試驗方法.直流電阻 | Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance |
| BS EN 50311-2003 | 鐵路設施.機車車輛.照明熒光燈用直流電子鎮流器 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
| BS EN 60077-3-2003 | 鐵路設施.機車車輛用電氣設備.電氣部件.直流斷路器規則 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers |
| BS EN 60146-2-2000 | 半導體變流器.一般要求和線路換向變流器.包括直流變換器的自換向變流器 | Semiconductor convertors - General requirements and line commutated convertors - Self-commutated semiconductor converters including direct d.c. converters |
| BS EN 60204-11-2001 | 機械的安全性.機器的電氣設備.電壓大于1000V交流電或1500V直流電和功率不超過36KV的高壓設備的要求 | Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| BS EN 60243-2-2001 | 固體絕緣材料介電強度試驗方法.直流電壓測試補充要求 | Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage |
| BS EN 60247-2004 | 絕緣液體.相對電容率、電介質損耗因數(tan<δ>)和直流電阻率的測量 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity |
| BS EN 60384-11-1-2008 | 電子設備用固定電容器.空白詳細規范.聚對苯二甲酸乙二醇酯薄膜電介質金屬箔直流固定電容器.評定等級EZ | Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification —Fixed polyethylene-terephthalate filmdielectric metal foil d.c. capacitors —Assessment level EZ |
| BS EN 60384-11-2008 | 電子設備用固定電容器.分規范.金屬箔式聚對苯二甲酸乙二醇酯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| BS EN 60384-13-1-2006 | 電子設備用固定電容器.第13-1部分:空白詳細規范.聚丙烯薄膜介質金屬箔直流固定電容器.評估等級E | Fixed capacitors for use in electronic equipment -Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ |
| BS EN 60384-13-2006 | 電子設備用固定電容器.第13部分:分規范.聚丙烯膜介質金屬箔直流固定電容器 | Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors |
| BS EN 60384-16-1-2005 | 電子設備用固定電容器.第16-1部分:空白詳細規范:金屬化聚丙烯薄膜電介質直流固定電容器.評定等級E和EZ | Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ |
| BS EN 60384-16-2005 | 電子設備用固定電容器.第16部分:分規范:金屬化聚丙烯薄膜電介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| BS EN 60384-19-1-2006 | 電子設備用固定電容器.第19-1部分:空白詳細規范.金屬化聚對苯二甲酸乙二醇酯膜電介質表面安裝直流固定電容 | Fixed capacitors foruse in electronicequipment —Part 19-1: Blank detail specification —Fixed metallized polyethyleneterephthalatefilm dielectric surfacemount d.c. capacitors — Assessmentlevel EZ |
| BS EN 60384-19-2006 | 電子設備用固定電容器.第19部分:分規范.金屬化聚對苯二甲酸乙二醇酯膜電介質表面安裝直流固定電容器 | Fixed capacitors foruse in electronicequipment —Part 19: Sectional specification — Fixedmetallized polyethylene-terephthalatefilm dielectric surface mount d.c.capacitors |
| BS EN 60384-2-1-2005 | 電子設備用固定電容器.第2-1部分:空白詳細規格.金屬化聚對苯二甲酸乙二酯薄膜電介質直流固定電容器.評定等 | Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethtylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ |
| BS EN 60384-2-2005 | 電子設備用固定電容器.第2部分:分規范:金屬化聚對苯二甲酸乙二醇酯薄膜電介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
| BS EN 60384-20-1-2008 | 電子設備用固定式電容器.空白詳細規范.金屬化聚苯撐硫薄膜電介質表面安裝直流(d.c.)固定電容器.評定等級EZ | Fixed capacitors for use in electronic equipment -Part 20-1: Blank detail specification - Fixed metalized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ |
| BS EN 60384-20-2008 | 電子設備用固定電容器.分規范.金屬化聚苯撐硫薄膜電介質表面安裝直流(d.c.)固定電容器 | Fixed capacitors foruse in electronicequipment —Part 20: Sectional specification —Fixed metallized polyphenylene sulfidefilm dielectric surface mount d.c.capacitors |
| BS EN 60384-23-1-2005 | 電子設備用固定電容器.空白詳細規范.金屬化聚萘二甲酸乙二醇酯薄膜電介質芯片直流固定電容器.評定等級EZ | Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed metallized polyethylene naphthalate film dielectric chip d.c. capacitors - Assessment level EZ |
| BS EN 60384-23-2005 | 電子設備用固定電容器.分規范.表面安裝的金屬化聚乙烯苯二甲酸鹽膜介質直流(DC)固定電容器 | Fixed capacitors for use in electronic equipment - Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors |
| BS EN 60384-6-1-2005 | 電子設備用固定電容器.第6-1部分:空白詳細規范.金屬化聚碳酸酯薄膜電介質直流固定電容器.評定等級E | Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E |
| BS EN 60404-4-1997+A2-2008 | 磁性材料.軟磁材料直流磁性的測量方法 | Magnetic materials - Part 4:Methods of measurement of d.c. magnetic properties of magnetically soft materials |
| BS EN 60477-1999 | 實驗室用直流(d.c.)電阻器 | Laboratory d.c. resistors |
| BS EN 60523-1980 | 直流電位計 | Direct-current potentiometers |
| BS EN 60524-1979 | 直流電阻分壓箱 | Direct-current resistive volt ratio boxes |
| BS EN 60564-1979 | 測量電阻用直流電橋 | D.C. bridges for measuring resistance |
| BS EN 60633-1999+A1-2009 | 高壓直流(HVDC)輸電術語 | Terminology for high-voltage direct current (HVDC) transmission |
| BS EN 60700-1-1998+A2-2008 | 高壓直流輸電用晶閘管換流閥.第1部分:電氣試驗 | Thyristor valves forhigh voltage directcurrent (HVDC) powertransmission —Part 1: Electrical testing |
| BS EN 60811-5-1-2000 | 電纜的絕緣和護套材料.通用試驗方法.填充復合物的專用方法.滴點.油分離.低溫脆性.總酸值.無腐蝕性成分.23℃ | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C |
| BS EN 60895-2003 | 帶電作業.標稱交流電壓800kV及以下和直流電壓±600kV的帶電作業用導電服 | Live working - Conductive clothing for use at a nominal voltage up to 800 kV a.c. and <+OR-> 600 kV d.c |
| BS EN 60898-2-2006 | 電氣附件.家用和類似用途電器裝置過電流保護斷路器.交流和直流電路斷路器 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c and d.c. operation |
| BS EN 60900-2004 | 帶電作業.使用壓力小于交流1000V和直流1500V的手工工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c |
| BS EN 60925-1991 | 管形熒光燈的直流供的電子鎮流器性能要求規范 | Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
| BS EN 60947-5-6-2001 | 低壓開關設備和控制設備規范.控制電路器件和開關元件.近接傳感器和開關放大器用直流接口(NAMUR) | Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| BS EN 61000-4-17-1999 | 電磁兼容性(EMC).試驗和測量技術.直流電輸入點脈動抗干擾試驗 | Electromagnetic compatibility (EMC) - Testing and measurement techniques - Ripple on d.c. input power port immunity test |
| BS EN 61000-4-29-2001 | 電磁兼容性(EMC).試驗和測量技術.直流輸入電力端口的電壓暫降、短時中斷和電壓變化抗擾度試驗.基礎EMC出版 | Electromagnetic compatibility (EMC) - Testing and measurement techniques - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests - Voltage dips, short interruptions and voltage variations on d.c.input power ports - Immunity tests - Basic EMC Publication |
| BS EN 61047-2004 | 鎢絲燈用交直流供電電子降壓轉換器.性能要求 | D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements |
| BS EN 61076-2-1999 | 直流低頻模擬及高速數字?jǐn)?shù)據系統用經過質量評定的連接器.圓形連接器.分規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Circular connectors with assessed quality - Sectional specification |
| BS EN 61076-3-100-2000 | 直流低頻模擬及數字高速數據應用系統用連接器.有質量評定的矩形連接器.帶有1.27mm雙排不可拆卸矩形接觸件及 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100:Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| BS EN 61076-3-101-1998 | 直流低頻模擬及高速數字?jǐn)?shù)據系統用已經過質量評定的連接器. 矩形連接器.帶梯形殼的屏蔽連接器的有效范圍和 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 x 2,54 mm centre-line |
| BS EN 61076-3-103-2004 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.矩形連接器.高速串行數據(HSSDC)用帶1.25mm間距 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| BS EN 61076-4-001-1997 | 直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用已經過質量評定的連接器.印制電路板連接器.空白詳細規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification |
| BS EN 61076-4-100-2002 | 直流低頻模擬和數字高速數據用經過質量評定的連接器.印制電路板連接器.2.5mm網格印制電路板和背板用二部式 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| BS EN 61076-4-102-1997 | 直流低頻率模擬及高速數字?jǐn)?shù)據系統用已經過過質量評定的連接器.印制電路板連接器.依照IEC 60917米制網格帶 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| BS EN 61076-4-103-1999 | 經過質量評定的直流低頻模擬及數字高速數據系統用連接器.印制電路板連接器.帶屏蔽和2.5mm基柵的兩件式連接 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| BS EN 61076-4-105-1998 | 直流低頻模擬及高速數字?jǐn)?shù)據系統用經過質量評定的連接器.印制電路板連接器.包括電信和聲訊工程等各種用途的 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| BS EN 61076-4-110-2002 | 直流低頻模擬和數字高速數據設備用經質量評定的連接器.印制板連接器.2.0mm基本柵級的并具有完全屏蔽和鎖定 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| BS EN 61076-4-1997 | 直流低頻模擬及高速數字?jǐn)?shù)據系統用經質量評定的連接器.分規范.印制電路板用連接器 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Sectional specification - Printed board connectors |
| BS EN 61076-5-2001 | 直流低頻率模擬及高速數據數字設備用連接器.經過質量評定的串聯插座.分規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification |
| BS EN 61076-7-2001 | 直流低頻率模擬及高速數字?jǐn)?shù)據系統用經過質量評定的連接器.分規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
| BS EN 61204-1995 | 直流輸出的低壓供電裝置.性能特征和安全性要求 | Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements |
| BS EN 61204-3-2001 | 直流輸出低壓供電裝置.電磁兼容性(EMC) | Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC) |
| BS EN 61204-6-2001 | 直流輸出低壓供電裝置.經過性能評定的低壓供電裝置要求 | Low voltage power supplies, d.c. output - Requirements for low-voltage power supplies of assessed performance |
| BS EN 61204-7-2006 | 直流輸出的低壓電源.安全要求 | Low-voltage power supplies, d.c. output - Safety requirements |
| BS EN 61325-1996 | 標稱電壓高于1000V以上高架線的絕緣.直流裝置陶瓷或玻璃絕緣件.定義,試驗方法和驗收規則 | Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria |
| BS EN 61347-2-12-2005 | 燈控制裝置.第2-12部分:放電燈(熒光燈除外)用直流或交流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) |
| BS EN 61347-2-13-2006 | 燈控裝置.發光二極管交直流供電控制裝置的特殊要求 | Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
| BS EN 61347-2-2-2001 | 燈的控制裝置.白熾燈用交、直流電子降壓轉換器的特殊要求 | Lamp controlgear - Particular requirements for d.c or a.c. supplied electronic step-down convertors for filament lamps |
| BS EN 61347-2-4-2001 | 燈具控制開關.普通照明直流供電電子鎮流器專門要求 | Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting |
| BS EN 61347-2-5-2001 | 燈具控制開關.公共運輸照明直流供電電子鎮流器專門要求 | Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for public transport lighting |
| BS EN 61347-2-6-2001 | 燈具控制開關.飛行器照明直流供電電子鎮流器專門要求 | Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for aircraft lighting |
| BS EN 61347-2-7-2006 | 燈控開關.第2-7部分:應急照明用直流電源鎮流器的特殊要求 | Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting |
| BS EN 61377-2-2003 | 鐵路設施.機車車輛.聯合試驗.斷路直流牽引電動機及其控制設備 | Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control |
| BS EN 61557-1-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.一般要求 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 1: General requirements |
| BS EN 61557-10-2001 | 最高達1000V交流和1500V直流的低壓分配系統電氣安全性.防護測量的試驗、測量或監測設備.試驗、測量或監測組 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Combined measuring equipment for testing, measuring or monitoring of protective measures |
| BS EN 61557-12-2008 | 交流1000V和直流1500V以下低壓配電系統的電氣安全.保護措施的測試、測量或監測用設備.性能測量和監測裝置(P | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring andmonitoring devices (PMD) |
| BS EN 61557-2-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.絕緣電阻 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 2: Insulation resistance |
| BS EN 61557-3-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.回路阻抗 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 3: Loop impedance |
| BS EN 61557-4-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.接地和等位連接電阻 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 4: Resistance of earth connectionand equipotential bonding |
| BS EN 61557-5-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.接地電阻 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 5: Resistance to earth |
| BS EN 61557-6-1998 | 不超過交流1000V和直流1500V低壓配電系統電氣安全性.防護用試驗、測量或監測設備.TT、TN和IT系統用殘余電流 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Residual current devices (RCD) in TT, TN and IT systems |
| BS EN 61557-6-2007 | 交流1000V和直流1500V以下低壓配電系統中的電氣安全.防護措施的測驗、測量或監控設備.第6部分:TT、TN和IT系 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures - Effectiveness of residual current devices (RCD) in TT, TN and IT systems |
| BS EN 61557-7-2007 | 1000V交流和1500V直流低壓配電系統電氣安全.保護措施測試、測量或監測設備.相序 | Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 7: Phase sequence |
| BS EN 61557-8-2007 | 低于1000V交流和1500V直流低壓配電系統的電氣安全.保護措施的測試、測量或監視設備.第8部分:IT系統絕緣監視 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Insulation monitoring devices for IT systems |
| BS EN 61557-9-2009 | 不大于1000伏交流和1500伏直流的低壓分布系統的電氣安全.第9部分:IT系統中絕緣故障的定位設備 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location inIT systems |
| BS EN 61660-1-1997 | 發電廠和變電所直流輔助設備短路電流.第1部分:短路電流計算 | Short-circuit currents in d.c auxiliary installations in power plants and substations - Calculation of short-circuit currents |
| BS EN 61660-2-1997 | 發電廠和變電所直流輔助設備短路電流.第2部分:結果計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Calculation of effects |
| BS EN 61788-1-2007 | 超導性.臨界電流測量.鈮-鈦復合超導體的直流臨界電流 | Superconductivity - Part 1: Critical current measurement - D.C. critical current of Nb-Ti composite superconductors |
| BS EN 61788-2-2007 | 超導性.臨界電流測量.Nb3Sn復合超導體的直流(D.C.)臨界電流 | Superconductivity - Critical current measurement - D.C. critical current of Nb3Sn composite superconductors |
| BS EN 61788-3-2006 | 超導性.臨界電流測量.涂層銀或銀合金的Bi-2212和Bi-2223氧化超導體的直流臨界電流 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| BS EN 61800-1-1998 | 可調速的電驅動系統.低電壓可調速直流電驅動系統額定規范 | Adjustable speed electrical power drive systems - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| BS EN 61851-21-2002 | 電動車輛導電充電系統.導電連接至交流/直流的電動車輛要求.電源 | Electric vehicle conductive charging system - Electric vehicle requirements for conductive connection to an a.c./d.c - supply |
| BS EN 62024-2-2009 | 高頻感應元件.電氣特性和測量方法.直流對直流變流器用感應器的額定電流 | High frequency inductive components - Electrical characteristics and measuring methods - Rated current of inductors for DC to DC converters |
| BS EN 62196-1-2004 | 電氣機車輸入端和機車連接器用插頭和插座.電氣機車傳導沖電.250A交流和400A直流及以下的電氣機車充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS EN 62199-2004 | 直流套管 | Bushings for D.C. application |
| BS EN 62384-2006 | 發光二極管模塊的交直流電源電子控制裝置.性能要求 | D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements |
| BS EN 62384-2006+A1-2009 | 發光二極管(LED)模塊的交流或直流供電電子控制裝置.性能要求 | DC or AC supplied electronic control gear for LED modules - Performance requirements |
| BS EN 62386-206-2009 | 數字可尋址照明接口.控制裝置用特殊要求.數字信號轉換為直流電壓信號(裝置類型 5) | Digital addressable lighting interface - Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) |
| BS EN 62501-2009 | 高電壓直流輸電(HVDC)用電壓源換流器(VSC)電子管.電氣測試 | Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission - Electrical testing |
| BS EN ISO 10133-2001 | 小艇.電力系統.超低電壓直流電力設備 | Small craft - Electrical systems - Extra-low-voltage d.c. installations |
| BS EN ISO 7346-3-1998 | 水質.對淡水魚(Brachydanio rerio Hamilton-Buchanan(真骨總目、鯉科))急性致死物質毒性的測定.直流法 | Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Flow-through method |
| BS EN ISO 8849-2003 | 小艇.電動直流艙底泵 | Small craft - Electrically operated direct-current bilge-pumps |
| BS G 142-1953 | 航空用超低電壓直流系統重負載電磁驅動的單極斷路器規范 | Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft |
| BS G 243-1990 | 發動機用點火電纜規范(4kV直流) | Specification for igniter cables for engine use (4 kV d.c.) |
| BS IEC 62527-2007 | 直流電等級規范用標準試驗接口語言(STIL)的擴展標準 | Standard for extensions to standard test interface language (STIL) for DC level specification |
| BS QC 300500-1989 | 電子元器件質量評估協調體系.電子設備用固定電容器.分規范:金屬化聚碳酸酯薄膜介質直流固定電容器 | Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification: fixed metallized polycarbonate film dielectric d.c. capacitors |
| BS QC 300501-1990 | 電子元器件質量評估的協調體系.電子設備用固定電容器.空白詳細規范:金屬化聚碳酸酯薄膜介質直流固定電容器. | Specification for harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Blank detail specification: fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E |
| BS QC 301700-1992 | 電子元器件質量評估協調體系.電子設備用固定電容器.聚碳酸酯薄膜介質金屬箔直流固定電容器分規范 | Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification for fixed polycarbonate film dielectric metal foil d.c. capacitors |
| BS QC 301701-1992 | 電子元器件質量評估協調體系.電子設備用固定電容器.空白詳細規范.聚碳酸酯薄膜介質金屬直流固定電容器.評估 | Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed polycarbonate film dielectric metal foil d.c. capacitors - Assessment level E |
| DD ENV 50123-7-1-1999 | 鐵路應用.固定裝置.直流開關裝置.直流牽引系統專用測量、控制和防護設備.應用指南 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Application guide |
| 編號 | 中文名稱 | 英文名稱 |