| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60034-19-1995 | 旋轉電機.第19部分:普通電源或整流電源供電直流電機的專門試驗方法 | Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
| IEC 60077-3-2001 | 鐵路應用 機車車輛用電氣設備 第3部分：電工元件 直流斷路器用規則 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d.c. circuit-breakers |
| IEC 60146-2-1999 | 半導體變流器 第2部分:包括直接直流變流器的自換相半導體變流器 | Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters |
| IEC 60204-11-2000 | 機械的安全 機械的電氣設備 第11部分:交流電壓1000V 或直流電壓1500V 以上和36kV以下高壓設備的要求 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| IEC 60243-2-2001 | 絕緣材料的電氣強度 試驗方法 第2部分：對直流電壓試驗的附加要求 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
| IEC 60246-1967 | 電視接收機用額定直流電壓為20kV和25kV、最高工作溫度為105℃的連接線 | Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers |
| IEC 60247-2004 | 液體絕緣材料.相對電容率、電介質損耗因數(tan<δ>)和直流電阻率的測量 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity |
| IEC 60381-1-1982 | 過程控制系統用模擬信號 第1部分:直流信號 | Analogue signals for process control systems. Part 1 : Direct current signals |
| IEC 60381-2-1978 | 過程控制系統用模擬信號 第2部分:直流電壓信號 | Analogue signals for process control systems. Part 2 : Direct voltage signals |
| IEC 60384-11-1-2008 | 電子設備用固定電容器.第11-1部分:空白詳細規范.金屬箔式聚乙烯-對苯二甲酸酯膜介質直流固定電容器.評定等 | Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ |
| IEC 60384-11-2008 | 電子設備用固定電容器.第11部分:分規范.金屬箔式聚乙烯-對苯二甲酸酯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| IEC 60384-13-1 Corrigendum 1-2009 | 電子設備用固定式電容器.第13-1部分:空白詳細規范.金屬箔式聚丙烯膜介質直流固定電容器.評定等級E和EZ.技術 | Fixed capacitors for use in electronic equipment - Part 13-1: Bland detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ; Corrigendum 1 |
| IEC 60384-13-1-2006 | 電子設備用固定電容器.第13部分:分規范:聚苯乙烯膜介質金屬箔直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E |
| IEC 60384-13-2006 | 電子設備用固定電容器.第13部分:分規范:金屬箔式聚苯乙烯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors |
| IEC 60384-16-1-2005 | 電子設備用固定電容器.第16-1部分:空白詳細規范.金屬化聚丙烯膜介質直流固定電容器.評定等級E和EZ | Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification - Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment level E and EZ |
| IEC 60384-16-2005 | 電子設備用固定電容器.第16部分:分規范.金屬化聚丙烯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric d.c. capacitors |
| IEC 60384-17-1-2005 | 電子設備用固定電容器.第17-1部分:空白詳細規范.金屬化聚丙烯膜介質直流和脈沖固定電容器.評定等級E和EZ | Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment level E and EZ |
| IEC 60384-17-2005 | 電子設備用固定電容器.第17部分:分規范.金屬化聚丙烯膜介質直流和脈沖固定電容器 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| IEC 60384-19-1-2006 | 電子設備用固定電容器.第19-1部分:空白詳細規范.金屬化聚乙烯對苯二甲酸酯膜介質表面安裝直流固定電容器.評 | Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors; Assessment level EZ |
| IEC 60384-19-2006 | 電子設備用固定電容器.第19部分:分規范:金屬化聚乙烯對苯二甲酸酯膜介質表面安裝直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
| IEC 60384-2-1-2005 | 電子設備用固定電容器.第2-1部分:空白詳細規范:金屬化聚乙烯對苯二甲酸酯薄膜介質直流固定電容器 評定等級E | Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment level E and EZ |
| IEC 60384-2-2005 | 電子設備用固定電容器.第2部分:分規范.金屬化聚乙烯對苯二甲酸酯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 2 : Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
| IEC 60384-20 Corrigendum 1-2008 | 電子設備用固定電容器.第20部分:分規范.金屬化聚苯硫醚膜介質直流片式固定電容器.技術勘誤1 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors; Corrigendum 1 |
| IEC 60384-20-1 Corrigendum 1-2008 | 電子設備用固定電容器.第20-1部分:空白詳細規范.金屬化聚苯硫醚膜介質直流片式固定電容器.評定等級EZ.技術 | Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ; Corrigendum 1 |
| IEC 60384-20-1-2008 | 電子設備用固定電容器.第20-1部分:空白詳細規范.金屬化聚苯硫醚膜介質直流片式固定電容器.評定等級EZ | Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ |
| IEC 60384-20-2008 | 電子設備用固定電容器.第20部分:分規范.金屬化聚苯硫醚膜介質直流片式固定電容器 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors |
| IEC 60384-23-1-2006 | 電子設備用固定電容器.第23-1部分:空白詳細規范.表面安裝的金屬化聚乙烯苯二甲酸鹽薄膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ |
| IEC 60384-23-2006 | 電子設備用固定電容器.第23部分:分規范.表面安裝的金屬化聚乙烯苯二甲酸鹽薄膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors |
| IEC 60404-4 AMD 1-2000 | 磁性材料 第4部分:磁性軟材料直流磁性能的測量方法 修改1 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials; Amendment 1 |
| IEC 60404-4 AMD 2-2008 | 磁性材料.第4部分:軟磁材料的直流磁性的測量方法.修改件2 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetially soft materials; Amendment 2 |
| IEC 60404-4 Edition 2.1-2000 | 磁性材料.第4部分:軟磁材料直流磁性能的測量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials |
| IEC 60404-4 Edition 2.2-2008 | 磁性材料.第4部分:軟磁材料的直流磁性的測量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials |
| IEC 60404-4-1995 | 磁性材料.第4部分:鐵和鋼直流磁特性測量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel |
| IEC 60477 AMD 1-1997 | 實驗室用直流電阻器 修改1 | Laboratory d.c. resistors; Amendment 1 |
| IEC 60477-1974 | 實驗室用直流電阻器 | Laboratory d.c. resistors |
| IEC 60510-1A-1980 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 補充1:6.2條:直流電源條件 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. First supplement: Sub-clause 6.2: D.C. source conditions |
| IEC 60523 AMD 1 Corrigendum 1-1980 | 直流電位差計 | Direct-current potentiometers |
| IEC 60523 AMD 1-1979 | 直流電位差計 修改1 | Direct-current potentiometers |
| IEC 60523 AMD 2-1997 | 直流電位差計 修改2 | Direct-current potentiometers; Amendment 2 |
| IEC 60523-1975 | 直流電位差計 | Direct-current potentiometers |
| IEC 60524 AMD 1-1981 | 直流電阻電壓比率計箱 修改1 | Direct-current resistive volt ratio boxes |
| IEC 60524 AMD 2-1997 | 直流電阻電壓比率計箱 修改2 | Direct-current resistive volt ratio boxes; Amendment 2 |
| IEC 60524-1975 | 直流電阻電壓比率計箱 | Direct-current resistive volt ratio boxes |
| IEC 60527-1975 | 直流放大器 特性和試驗方法 | Direct current amplifiers; characteristics and test methods |
| IEC 60564 AMD 1-1981 | 測量電阻用直流電橋 修改1 | D.C. bridges for measuring resistance |
| IEC 60564 AMD 2-1997 | 測量電阻用直流電橋 修改2 | DC bridges for measuring resistance; Amendment 2 |
| IEC 60564-1977 | 測量電阻用直流電橋 | D.C. bridges for measuring resistance |
| IEC 60633 AMD 1-2009 | 高電壓直流輸電(HVDC)術語.修改件1 | Terminology for high-voltage direct current (HVDC) transmission; Amendment 1 |
| IEC 60633 Edition 2.1-2009 | 高壓直流(HVDC)傳輸?shù)膶Ｓ眯g語 | Terminology for high-voltage direct current (HVDC) transmission |
| IEC 60633-1998 | 高壓直流(HVDC)輸電術語 | Terminology for high-voltage direct current (HVDC) transmission |
| IEC 60700-1 AMD 1-2003 | 高壓直流(HVDC)電力傳輸用可控硅閥門.第1部分:電氣試驗.修改件1 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing; Amendment 1 |
| IEC 60700-1 AMD 2-2008 | 高壓直流電(HVDC)電力傳輸用半導體閘流管閥.第1部分:電氣測試 | Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1 Edition 1.1-2003 | 高壓直流(HVDC)電力傳輸用可控硅閥.第1部分:電氣試驗 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1 Edition 1.2-2008 | 高壓直流電(HVDC)電力傳輸用晶閘管閥.第1部分:電測試 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1-1998 | 高壓直流(HVDC)輸電用晶閘管閥 第1部分:電氣試驗 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60811-5-1 AMD 1-2003 | 電纜和光纜用絕緣和護套材料.通用試驗方法.第5-1部分:填充復合物的專用方法.滴點.油分離.較低溫脆性.總酸值 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1 |
| IEC 60811-5-1 Edition 1.1-2004 | 電纜和光纜用絕緣和護套材料.通用試驗方法.第5-1部分:填充復合物的專用方法.滴點.油分離.較低溫脆性.總酸值 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C |
| IEC 60811-5-1-1990 | 電纜絕緣和護套材料的通用試驗方法 第5部分:填充復合物的專用方法 第1節:滴點 油分離 較低溫脆性 總酸值 無 | Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; permittivity at 23 °C; d.c. resistivity at 23 °C and 100 °C |
| IEC 60895 Corrigendum 1-2003 | 帶電作業.額定交流電壓800kV及以下和直流電壓600kV時帶電作業用的導電衣服 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?600 kV d.c. |
| IEC 60895-2002 | 帶電作業.標稱交流電壓800kV以下和直流電壓±600kV的帶電作業用的導電衣著 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?600 kV d.c. |
| IEC 60898-2 AMD 1-2003 | 家用和類似設施用的過電流保護斷路器 第2部分:交流和直流操作斷路器.修改件1 | Circuit-breakers for overcurrent protection for household an similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation; Amendment 1 |
| IEC 60898-2 Edition 1.1-2003 | 家用和類似設施用的過電流保護斷路器.第2部分:交流和直流操作斷路器 | Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| IEC 60898-2-2000 | 家用和類似設施用的過電流保護斷路器 第2部分:交流和直流操作的斷路器 | Circuit-breakers for overcurrent protection for household an similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| IEC 60900-2004 | 帶電作業.交流1000V和直流1500V以下帶電作業用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. |
| IEC 60906-3-1994 | 家用和類似用途插頭插座的IEC系統 第3部分:交流和直流16A,6V、12V、24V、48V、安全特低電壓(SELV)插頭插座 | IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c. |
| IEC 60925 AMD 1-1996 | 管形熒光燈用直流供電電子鎮流器 性能要求 修改1 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 1 |
| IEC 60925 AMD 2-2001 | 管形熒光燈用直流供電電子鎮流器 性能要求 修改2 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2 |
| IEC 60925 Edition 1.2-2001 | 管狀熒光燈用直流電子鎮流器.性能要求 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60925-1989 | 管形熒光燈用直流供電電子鎮流器 性能要求 | D.c. supplied electronic ballasts for tubular fluorescent lamps; performance requirements |
| IEC 60946-1988 | 過程測量和控制系統的二進制直流電壓信號 | Binary direct voltage signals for process measurement and control systems |
| IEC 60947-5-6-1999 | 低壓開關設備和控制設備 第5-6部分:控制電路器件和切換元件 接近傳感器和切換放大器用直流連接器件(NAMUR) | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| IEC 61000-4-17 AMD 1-2001 | 電磁兼容性(EMC) 第4-17部分:試驗和測量技術 直流輸入電力端口上的紋 抗擾度試驗 修改1 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test; Amendment 1 |
| IEC 61000-4-17 AMD 2-2008 | 電磁兼容性(EMC).第4-17部分:測試和測量技術.直流輸入電力端口上波紋抗擾度試驗.修改件2 | Electromagnetic compability (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test; Amendment 2 |
| IEC 61000-4-17 Edition 1.1-2002 | 電磁兼容性(EMC).第4-17部分:試驗和測量技術.直流電流輸入功率點通道.干擾試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test |
| IEC 61000-4-17 Edition 1.2-2009 | 電磁兼容性(EMC).第4-17部分:試驗和測量技術.直流電輸入功率端口紋波抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port immunity test |
| IEC 61000-4-17-1999 | 電磁兼容性(EMC) 第4-17部分:試驗和測量技術 直流輸入電力端口上的紋 抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port, immunity test |
| IEC 61000-4-29-2000 | 電磁兼容性(EMC).第4-29部分:試驗和測量技術.直流輸入電力端口上的電壓暫降、短時中斷和電壓變化抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IEC 61020-4-2-1995 | 電子設備用機電開關 第4部分:杠桿(鈕子)開關的分規范 第2節:電氣最高交流電壓為227V、最高直流電壓為30V、 | Electromechanical switches for use in electronic equipment - Part 4: Sectional specification for lever (toggle) switches - Section 2: Detail specification for one pole, two pole, four pole, sealed lever (toggle) switches, 277 V a.c. maximum, 30 V d.c. maximum, 20 A maximum electrical rating |
| IEC 61047-2004 | 鎢絲燈用交直流供電電子降壓轉換器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| IEC 61076-2-1998 | 直流低頻模擬及數字高速數據應用系統用連接器 第2部分:有質量評定的圓形連接器 分規范 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification |
| IEC 61076-3-100-1999 | 直流低頻模擬及數字高速數據應用系統用連接器 第3-100部分:有質量評定的矩形連接器 帶有1.27mm雙排不可拆卸 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| IEC 61076-3-101-1997 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器 第3部分:矩形連接器 第101節:在1.27mm×2.54mm中 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm × 2,54 mm centre-line |
| IEC 61076-4-001-1996 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器 第4部分:印制板連接器 第001節:空白詳細規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification |
| IEC 61076-4-102-1997 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器 第4部分:印制板連接器 第102節:符合IEC 60917的 | Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| IEC 61076-4-103-1999 | 直流低頻模擬及數字高速數據應用系統用連接器 第4部分:有質量評定的印制板連接器 第103節:具有屏蔽罩及基本 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
| IEC 61076-4-104-1999 | 直流低頻模擬及數字高速數據應用系統用連接器 第4-104部分:有質量評定的印制板連接器 基本網格為2.0mm、接 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an multiple grid of 0,5 mm |
| IEC 61076-4-105-1995 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器 第4部分:印制板連接器 第105節:供包括通信和音響 | Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| IEC 61076-4-1995 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器 第4部分:分規范 印制板連接器 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| IEC 61076-7-2000 | 直流低頻模擬及數字高速數據應用系統用連接器 第7部分:具有質量評定的包括鑒定和能力批準的電纜引出端附件 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
| IEC 61196-1-101-2005 | 同軸通信電纜.第1-101部分:電氣試驗方法.電纜導線的直流電阻試驗 | Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable |
| IEC 61204 AMD 1-2001 | 直流輸出的低壓電源裝置 性能特性和安全要求 修改1 | Low-voltage power supply devices, d.c. output - Performance characteristics; Amendment 1 |
| IEC 61204 Edition 1.1-2001 | 直流輸出低壓供電裝置.性能特性 | Low-voltage power supply devices, d.c. output - Performance characteristics |
| IEC 61204-1993 | 直流輸出的低壓電源裝置 性能特性和安全要求 | Low-voltage power supply devices, d.c. output; performance characteristics and safety requirements |
| IEC 61204-3 Corrigendum 1-2000 | 直流輸出的低壓電源裝置.第3部分:電磁兼容性(EMC) | Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| IEC 61204-3-2000 | 直流輸出的低壓電源裝置 第3部分:電磁兼容性(EMC) | Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| IEC 61204-6-2000 | 直流輸出的低壓電源裝置 第6部分:具有評定性能的低壓電源裝置的要求 | Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance |
| IEC 61204-7-2006 | 直流輸出的低壓電源裝置.第7部分:安全要求 | Low-voltage power supplies, d.c. output - Part 7: Safety requirements |
| IEC 61325-1995 | 標稱電壓1000V以上的架空線用絕緣子 直流系統用陶瓷或玻璃絕緣子單元 定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitons, test methods and acceptance criteria |
| IEC 61347-2-12-2005 | 燈的控制裝置.第2-12部分:放電燈(熒光燈除外)用直流或交流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 61347-2-13-2006 | 燈控裝置.第2-13部分:發光二極管交直流供電控制設施的特殊要求 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgears for LED modules |
| IEC 61347-2-2 AMD 1-2005 | 燈的控制裝置.第2-2部分:白熾燈的直流或交流供電電子降壓變換器的特殊要求. | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps; Amendment 1 |
| IEC 61347-2-2 AMD 2-2006 | 燈控設備.第2-2部分:白熾燈用交、直流電子電壓轉換器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps; Amendment 2 |
| IEC 61347-2-2 Edition 1.1-2006 | 燈的控制裝置.第2-2部分:白熾燈用交、直流電子降壓轉換器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-2 Edition 1.2-2006 | 燈控制設備.第2-2部分:白熾燈用直流或交流電子降壓轉換器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-2-2000 | 燈的控制裝置 第2-2部分:白熾燈用交、直流電子降壓轉換器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-4-2000 | 燈的控制裝置 第2-4部分:普通照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting |
| IEC 61347-2-5-2000 | 燈的控制裝置 第2-5部分:公共運輸工具照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting |
| IEC 61347-2-6-2000 | 燈的控制裝置 第2-6部分:航空器照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting |
| IEC 61347-2-7-2006 | 燈的控制裝置 第2-7部分:應急照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting |
| IEC 61377-2-2002 | 鐵路設施.機車車輛.聯合試驗.第2部分:反向直流牽引電動機及其控制設備 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61378-2-2001 | 變流變壓器 第2部分：高壓直流（HVDC）用變壓器 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEC 61557-1-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第1部分:一般要求 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
| IEC 61557-10-2000 | 1000V交流和1500V直流的低壓分配系統的電氣安全.防護測量的試驗、測量和監測設備.第10部分:試驗測量或防護 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures |
| IEC 61557-11-2009 | 交流1000V和直流1500V以下低壓配電系統中的電氣安全性.防護措施的試驗、測量或監控設備.第11部分:TT、TN和I | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems |
| IEC 61557-12-2007 | 交流1000V和直流1500V以下低壓配電系統的電氣安全.保護措施的測試、測量或監測用設備.第12部分:性能測量和 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
| IEC 61557-2-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第2部分:絕緣阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
| IEC 61557-3-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第3部分:回路阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
| IEC 61557-4-2007 | 1000V交流和小于1500V直流的低壓配電系統的電氣安全性.防護措試驗、測量和監控設備.第4部分:接地和等效連接 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
| IEC 61557-5-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第5部分:接地電阻 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
| IEC 61557-6-2007 | 小于1000V交流和1500V直流的低壓配電系統中的電氣安全.防護措施的測試、測量或監控用設備.第6部分:TT、TN和 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness residual current devices (RCD) in TT, TN and IT systems |
| IEC 61557-7-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第7部分:相序 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
| IEC 61557-8 Corrigendum 1-2007 | 交流1000V和直流1500V以下低壓配電系統中的電氣安全.防護措施的測試、測量或監測用設備.第8部分:信息技術(I | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems; Corrigendum 1 |
| IEC 61557-8-2007 | 1000V交流和小于1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第8部分:IT系統絕緣 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
| IEC 61557-9-2009 | 交流1000V和直流1500V以下低壓配電系統中的電氣安全性.防護措施的試驗、測量或監控設備.第9部分:IT系統中的 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems |
| IEC 61660-1 Corrigendum 1-1999 | 電廠與變電站直流輔助設備中的短路電流.第1部分:短路電流的計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1 Corrigendum 2-2000 | 電廠與變電站直流輔助設備中的短路電流.第1部分:短路電流的計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1 Technical Corrigendum-1999 | 電廠和變電站中的直流輔助設備的短路電流.第1部分:短路電流的計算.技術勘誤表 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents; Technical Corrigendum |
| IEC 61660-1-1997 | 電廠與變電站直流輔助設施中的短路電流 第1部分:短路電流的計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-2-1997 | 電廠與變電站直流輔助設施中的短路電流 第2部分:效應計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects |
| IEC 61788-1-2006 | 超導性.第1部分:臨界電流測量.鈮-鈦復合超導體的臨界直流電流 | Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors |
| IEC 61788-2-2006 | 超導性.第2部分:臨界電流測量.Nb<下標3>Sn復合超導體的直流臨界電流 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors |
| IEC 61788-3-2006 | 超導性.第3部分:臨界電流測量.銀和/或銀合金鎧裝的鉍-2212和鉍-2223氧化物超導體的臨界直流電流 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| IEC 61800-1-1997 | 可調速電力傳動系統 第1部分:一般要求 低壓可調速直流電力傳動系統的定額規范 | Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| IEC 61803 Corrigendum 1-1999 | 高壓直流(HVDC)變流站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61803-1999 | 高壓直流(HVDC)變流站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61851-21-2001 | 電動車輛導電充電系統 第21部分：導電連接至交流/直流電源的電動車輛要求 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| IEC 61992-1-2006 | 鐵路設施.固定裝置.直流開關設備.第1部分:總則 | Railway applications - Fixed installations - DC switchgear - Part 1: General |
| IEC 61992-2-2006 | 鐵路設施.固定設備.直流開關設備.第2部分:直流斷路器 | Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit-breakers |
| IEC 61992-3-2006 | 鐵路設施.固定裝置.直流開關裝置.第3部分:室內直流斷路器,隔離開關和接地開關 | Railway applications - Fixed installations - DC switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 61992-4-2006 | 鐵路設施.固定裝置.直流開關裝置.第4部分:露天直流斷路器,隔離開關和接地開關 | Railway applications - Fixed installations - DC switchgear - Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 61992-5-2006 | 鐵路設施.固定裝置.直流開關裝置.第5部分:直流系統中的特定用途用電涌放電器和低壓限制器 | Railway applications - Fixed installations - DC switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems |
| IEC 61992-6-2006 | 鐵路設施.固定裝置.直流開關裝置.第6部分:直流開關組件 | Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies |
| IEC 61992-7-1-2006 | 鐵路設施.固定裝置.直流開關裝置.第7-1部分:直流牽引系統中的特定用途用測量,控制和保護裝置.應用手冊 | Railway applications - Fixed installations - DC switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| IEC 61992-7-2-2006 | 鐵路設施.固定裝置.直流開關裝置.第7-2部分:直流牽引系統中的特定用途用測定,控制和保護裝置.隔離換流器和 | Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| IEC 61992-7-3-2006 | 鐵路應用.固定設施.直流開關裝置.第7-3部分:直流牽引系統專門使用的測量,控制和保護裝置.絕緣電壓轉換器和 | Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| IEC 62024-2-2008 | 高頻感應元件.電氣特性和測量方法.第2部分:直流對直流變流器用感應器的額定電流 | High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter |
| IEC 62128-2-2003 | 鐵路設施.固定設備.第2部分:由直流牽引系統產生的雜散電流影響的防護規定 | Railway applications - Fixed installations - Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems |
| IEC 62199-2004 | 直流裝置套管 | Bushings for d.c. application |
| IEC 62384 AMD 1-2009 | LED 模塊用直流或交流電子控制裝置的性能要求,修改件1 | D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements; Amendment 1 |
| IEC 62384-2006 | 發光二極管模塊的直流或交流電源電子控制裝置.性能要求 | D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements |
| IEC 62386-206-2009 | 數字可尋址照明接口.第206部分:控制裝置特殊要求.數字信號轉換為直流電壓信號(裝置類型 5) | Digital addressable lighting interface - Part 206: Particular requirements for contol gears - Conversion from digital signal into d.c. voltage (device type 5) |
| IEC 62501-2009 | 高電壓直流輸電(HVDC)用電壓源換流器(VSC)電子管.電氣測試 | Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing |
| IEC/PAS 61975-2004 | 高壓直流裝置的系統試驗 | System tests for high-voltage direct current (HVDC) installations |
| IEC/PAS 62344-2007 | 高壓直流電(HVDC)連接(NPPAS)用地面電極設計的通用指南 | General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS) |
| IEC/PAS 62543-2008 | 用電壓電源整流器的直流電傳輸 | DC transmission using voltage sourced converters |
| IEC/PAS 62544-2008 | 高壓直流輸電(HVDC)用有源濾波器 | Active filters in HVDC applications |
| IEC/TR 60344-2007 | 低頻電纜和電線未涂層和涂層銅導線的直流電阻計算.應用指南 | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide |
| IEC/TR 60919-2-2008 | 帶線性通信轉換器的高壓直流(HVDC)系統性能.第2部分:故障和跳閘 | Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2: Faults and switching |
| IEC/TR 60919-3-1999 | 高壓直流系統的性能 第３部分：動態 | Preformance of high-voltage direct current(HVDC)systems--Part3:Dynamic conditions |
| IEC/TR 60919-3-2009 | 帶有線性整流轉換器的高壓直流(HVDC)系統的性能.第3部分:動態條件 | Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions |
| IEC/TR 61660-3-2000 | 電廠與變電站直流輔助設施中的短路電流 第3部分:計算舉例 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3: Examples of calculations |
| IEC/TR 62001-2009 | 高壓直流系統(HVDC).交流濾波器規范和設計評價用指導手冊 | High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of AC filters |
| IEC/TR2 61245-1993 | 直流系統用高壓絕緣子的人工污穢試驗 | Artificial pollution tests on high-voltage insulators to be used on d.c. systems |
| IEC/TS 60071-5-2002 | 絕緣配合.第5部分:高壓直流電流變壓器站的工作程序 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| ISO 10133-2000 | 小艇 電氣系統 超低壓直流裝置 | Small craft - Electrical systems - Extra-low-voltage d.c. installations |
| ISO 11452-7-2003 | 道路車輛.窄帶輻射的電磁能量產生的電干擾的部件試驗方法.第7部分:直流射頻(RF)能注入 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection |
| ISO 7346-3-1996 | 水質 對淡水魚(真骨總目、鯉科)急性致死物質毒性的測定 第3部分:直流法 | Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method |
| ISO 7398-1990 | 摩托車 直流閃光器 | Motorcycles; direct current flasher units |
| ISO 8052-1990 | 輕便摩托車 直流閃光器 | Mopeds; direct current flasher units |
| ISO 8818-1988 | 旅游居住車 旅居掛車 12 V 直流超低壓電器設施 | Leisure accommodation vehicles; caravans; 12 V direct current extra low voltage electrical installations |
| ISO 8849-2003 | 小艇.電動直流艙底泵 | Small craft - Electrically operated direct-current bilge pumps |
| 編號 | 中文名稱 | 英文名稱 |