| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI A135.4-2004 | 基本的硬質纖維板 | Basic Hardboard |
| ANSI A135.5-2004 | 預制硬質纖維板嵌板 | Prefinished Hardboard Paneling |
| ANSI A208.2-2002 | 內部使用的中密度纖維板 | Medium Density Fiberboard for Interior Use |
| ANSI INCITS 231-1994 | 信息系統.纖維分布式數據接口(FDDI).物理層協議(PHY-2) | Information Systems - Fiber Distributed Data Interface (FDDI) - Physical Layer Protocol (PHY-2) |
| ANSI INCITS 239-1994 | 信息系統.纖維分布式數據接口(FDDI).令牌環媒體訪問控制-2(MAC-2)(以前為ANSI X3.239-1994 (R1999)) | Information Systems - Fibre Distributed Data Interface (FDDI) - Token Ring Media Access Control-2 (MAC-2) (formerly ANSI X3.239-1994 (R1999)) |
| ANSI INCITS230-1994 | 信息技術.纖維通道.物理和信令接口 | Information technology - Fibre channel - Physical and signaling interface (FC-PH) |
| ANSI INCITS332 AMD 1-2003 | 信息技術.纖維信道任意環路（FC-AL-2）.修改件1 | Information technology - Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 1 |
| ANSI INCITS332-1999 | 纖維信道任意環路（FC-AL-2） | Fibre Channel Arbitrated Loop (FC-AL-2) |
| ANSI INCITS356-2002 | 信息技術.纖維信道.音頻視頻(FC-AV) | Information technology - Fibre Channel - Audio Video (FC-AV) |
| ANSI INCITS357-2002 | 信息技術.纖維信道.虛擬接口結構映射協議(FC-VI) | Information Technology - Fibre Channel - Virtual Interface Architecture Mapping Protocol (FC-VI) |
| ANSI INCITS416-2006 | 信息技術.SCSI的纖維信道協議.第三版(FCP-3) | Information technology - Fibre Channel Protocol for SCSI, Third Version (FCP-3) |
| ANSI INCITS433-2007 | 信息技術.纖維信道鏈接服務(FC-LS) | Information Technology - Fibre Channel Link Services (FC-LS) |
| ANSI N322-1996 | 直接和間接讀取石英纖維便攜式放射量測定器的檢驗和試驗規范 | Inspection and Test Specifications for Direct and Indirect Reading Quartz Fiber Pocket Dosimeters |
| ANSI N42.5-1980 | 蓋革-米勒計數管的管座.石英－纖維靜電計式曝光表和相似曝光表的相互關系 | Bases for gm counter tubes - Interrelationship of quartz-fiber electrometer type exposure meters and companion exposure meter chargers |
| ANSI NCITS 321-1998 | 信息技術.纖維信道.轉換結構(FC-SW) | Information Technology - Fibre Channel - Switch Fabric (FC-SW) |
| ANSI X3.229-1994 | 信息系統.纖維分配數據接口(FDDI).站管理(SMT) | Information systems - Fibre Distributed Data Interface (FDDI) - Station Management (SMT) |
| ANSI X3.230 AMD 1-1996 | 信息技術.纖維信道.物理和信號接口(FC-PH).修改1 | Information technology - Fibre channel - Physical and signaling interface (FC-PH); Amendment 1 |
| ANSI X3.230-1994 | 信息技術.纖維通道.物理和信令發送接口(FC-PH) | Information technology - Fibre channel - Physical and signaling interface (FC-PH) |
| ANSI X3.231-1994 | 信息系統.纖維分配數據接口(FDDI).物理層協議(PHY-2) | Information systems - Fibre Distributed Data Interface (FDDI) - Physical layer protocol (PHY-2) |
| ANSI X3.237-1995 | 信息技術.光纖分配數據接口(FDDI).權標環低成本纖維物理層依賴媒體 | Information technology - Fibre Distributed Data Interface (FDDI) - Token ring Low-Cost Fibre Physical Layer Medium Dependent (LCF-PMD) |
| ANSI X3.239-1994 | 信息系統.纖維分配數據接口(FDDI).權標環介質存取控制-2(MAC-2) | Information systems - Fibre Distributed Data Interface (FDDI) - Token ring media access control-2 (MAC-2) |
| ANSI X3.254-1994 | 信息技術.纖維通道.HIPPI-FP(FC-FP)的繪制 | Information technology - Fibre channel - Mapping to HIPPI-FP (FC-FP) |
| ANSI X3.262-1995 | 信息技術.纖維分配數據接口(FDDI).一致性試驗協議.協議執行一致性陳述形式表(CT-PICS) | Information technology - Fiber Distributed Data Interface (FDDI) - Conformance test protocol implementation conformance statement proforma (CT-PICS) |
| ANSI X3.269-1996 | 信息技術.小型計算機系統接口(SCSI)的纖維通道協議 | Information technology - Fibre channel protocol for SCSI |
| ANSI X3.297-1997 | 信息技術.纖維信道.物理和信令發送接口-2 | Information technology - Fibre Channel - Physical and Signalling Interface-2 (FC-PH-2) |
| ANSI X3.303-1998 | 纖維信道物理和信號發送接口3(FC-PH-3) | Fibre Channel Physical and Signalling Interface-3 (FC-PH-3) |
| ANSI/AAMI ST65-2000 | 醫療衛生設備用可重復使用的外科纖維術程序 | Processing of Reusable Surgical Textiles for Use in Health Care Facilities |
| ANSI/ASTM C581-2003 | 液體設備的玻璃纖維增強結構用熱固性樹脂耐化學腐蝕性測定的實施規范 | Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ANSI/ASTM D1030-1999 | 紙張和紙板的纖維分析試驗方法 | Test Method for Fiber Analysis of Paper and Paperboard |
| ANSI/ASTM D2105-2001 | 玻璃纖維徑向拉伸特性試驗方法 | Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ANSI/ASTM D2310-2006 | 機制玻璃纖維(玻璃纖維增強熱固樹脂)管規范 | Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D2861-1998 | 復合型帶介電薄膜或精致纖維的銅箔柔韌性測試方法 | Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ANSI/ASTM D2925-2001 | 全孔流情況下玻璃纖維(玻璃纖維增強熱固樹脂)束偏轉測試方法 | Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ANSI/ASTM D2992-2006 | 玻璃纖維(增強玻璃纖維的熱固樹脂)管和配件用獲得靜液壓或壓力設計基礎的規范 | Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ANSI/ASTM D2996-2001 | 纖維纏繞"纖維玻璃"(玻璃纖維增強熱固性樹脂)管用規范 | Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe |
| ANSI/ASTM D2997-2001 | 離心成形玻璃纖維(玻璃纖維增強熱固樹脂)管規范 | Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D3262-2006 | 纖維玻璃(玻璃纖維增強熱固樹脂)污水管規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ANSI/ASTM D3299-2000 | 纖維纏繞的玻璃纖維增強的熱固樹脂耐化學腐蝕的容器規范(08.04) | Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D3345-1996 | 木材及其他纖維素材料防白蟻實驗室評定試驗方法 | Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ANSI/ASTM D3353-2004 | 纖維絕緣磁性金屬線的試驗方法 | Test Methods for Fibrous-Insulated Magnet Wire |
| ANSI/ASTM D3517-2006 | 玻璃纖維增強熱固性樹脂壓力管的規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ANSI/ASTM D3567-1997 | 玻璃纖維(玻璃纖維增強熱固樹脂)管和配件的尺寸測定用實施規程 | Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ANSI/ASTM D3681-2006 | 在偏轉條件下玻璃纖維(玻璃纖維增強熱固樹脂)管的耐化學腐蝕的試驗方法 | Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ANSI/ASTM D3753-2005 | 玻璃纖維增強聚酯檢查孔規范 | Specification for Glass Fiber-Reinforced Polyester Manholes |
| ANSI/ASTM D3754-2006 | 玻璃纖維增強熱固性樹脂污水壓力管和工業壓力管的規范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ANSI/ASTM D3841-2001 | 玻璃纖維增強聚酯塑料板規范 | Specification for Glass Fiber-Reinforced Polyester Plastic Panels (08.04) |
| ANSI/ASTM D3982-2003 | 接觸壓模制玻璃纖維增強熱固性樹脂管和護罩規范 | Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Duct and Hoods |
| ANSI/ASTM D4097-2001 | 纖維玻璃增強的熱固樹脂耐化學藥品罐的規范 | Specification for Conduct Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D4167-1997 | 纖維增強塑料風扇和鼓風機規范 | Specification for Fiber-Reinforced Plastic Fans and Blowers (08.04) |
| ANSI/ASTM D4250-1999 | 含吸水纖維產品持水量的測試方法 | Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
| ANSI/ASTM D4398-2007 | 用板單面曝光法測定玻璃纖維增強熱固性樹脂耐化學性的試驗方法 | Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ANSI/ASTM D4476-1997 | 纖維增強拉擠塑料棒彎曲特性試驗方法 | Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ANSI/ASTM D4881-2005 | 漆包纖維或薄膜纏繞磁線的耐熱性標準試驗方法 | Test Method for Thermal Endurance of Varnished Fibrous or Film Wrapped Magnet Wire |
| ANSI/ASTM D4969-1997 | PTFE覆層玻璃纖維規范(08.03) | Specification for PTFE Coated Glass Fabric (08.03) |
| ANSI/ASTM D5319-2001 | 玻璃纖維增強聚酯墻板和天花板規范 | Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ANSI/ASTM D5365-2006 | 玻璃纖維(玻璃纖維增強熱固樹脂)管的長期環彎曲應力試驗方法 | Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D5421-2005 | 接觸模制玻璃纖維(玻璃-纖維-增強熱固性樹脂)法蘭的標準規范 | Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ANSI/ASTM D5677-2005 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5685-2005 | 玻璃纖維規范.(玻璃纖維加固的熱硬性樹脂)加壓管配件 | Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ANSI/ASTM D585-1997 | 單批紙、紙板、纖維紙板和相關產品的取樣和驗收慣例 | Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Products |
| ANSI/ASTM D6041-1997 | 接觸模壓"纖維玻璃" (玻璃纖維增強熱固性樹脂)耐腐蝕管和配件規范 | Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ANSI/ASTM D619-1999 | 電絕緣纖維板試驗方法 | Test Methods for Vulcanized Fibre Used for Electrical Insulation (10.01) |
| ANSI/ASTM D706-1996 | 醋酸纖維素模壓和擠壓成形化合物規范 | Specification for Cellulose Acetate Molding and Extrusion Compounds |
| ANSI/ASTM D707-1996 | 醋酸-丁酸纖維素模壓和擠壓成形化合物規范 | Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
| ANSI/ASTM D787-1997 | 乙基纖維模制和擠壓化合物規范 | Specification for Ethyl Cellulose Molding and Extrusion Compounds |
| ANSI/ASTM E1650-2004 | 乙酸纖維素劑量測定系統的使用規程 | Use of a Cellulose Acetate Dosimetry System, Practice for |
| ANSI/ASTM F1092-2004 | 擠拔玻璃纖維增強塑料制露天防風暴和方型防護扶手規范 | Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails |
| ANSI/ASTM F1173-2001 | 船用熱固樹脂玻璃纖維管和配件規范 | Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
| ANSI/ASTM F1932-1998 | 睡袋紡織纖維回彈力測量試驗方法 | Test Method for Measuring Sleeping Bag Loft |
| ANSI/ASTM F2019-2003 | 將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程 | Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F2075-2001 | 運動場設備下方和周圍的運動場安全表面用工程木纖維規范 | Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F2075a-2001 | 運動場設備下方和周圍作為運動場安全地面的工程木纖維規范 | Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F2087-2001 | 玻璃纖維編織繩和油繩包裝慣例 | Practices for Packing, Fiberglass, Braided, Rope and Wick |
| ANSI/ASTM F2154-2001 | 吸音板、玻璃纖維和表面平整的多孔玻璃纖維布規范 | Specification for Sound Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
| ANSI/AWWA C950-2007 | 玻璃纖維壓力管 | Fiberglass Pressure Pipe |
| ANSI/AWWA D120-2002 | 熱固玻璃增強纖維塑料水箱 | Thermosetting Fiberglass-Reinforced Plastic Tanks |
| ANSI/AWWA F101-2007 | 玻璃纖維增強塑料洗滌水槽和流水槽的接觸模壓 | Contact Molded, Fiberglass Reinforced Plastic Washwater Troughs and Launders |
| ANSI/AWWA F102-2007 | 合模模塑玻璃纖維增強塑料的堰板、浮渣檔板和安裝托架 | Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets |
| ANSI/CEA 709.4-2000 | 纖維光學信道標準 | Fiber Optic Channel Standard |
| ANSI/EIA 492B000-1988 | IV類單模光導纖維分規范 | Sectional Specification for Class IV Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 492BA00-1988 | IVa級色散無漂移單膜光導纖維的空白詳細規范. | Blank Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 5150000-1986 | 光學纖維和光纜接頭的一般規范 | Generic Specification for Optical Fiber and Cable Splices |
| ANSI/EIA/TIA 455-43-1984 | 光導纖維的輸出近場輻射圖測量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/EIA/TIA 455-56B-1995 | 光導纖維和光纜耐霉性評估的試驗方法 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/EIA/TIA 492AAAA-1989 | 62.5um連芯直徑/125um連皮直徑1a級多元分級指數光導纖維的詳細規范 | Detail Specification for 62.5um Core Diameter/125-um Cladding Diameter Class 1a Multimore Graded-Index Optical Waveguide Fibers |
| ANSI/EIA/TIA 492BB00-1989 | 1Vb級色散位移的單模光導纖維的空白詳細規范 | Blank Detail Specification for Class lVb Dispersion-Shifted Single Mode Optical Waveguide Fibers |
| ANSI/EIA/TIA-455-104A-1993 | 纖維光學電纜的循環彎曲試驗 | Fiber Optic Cable Cyclic Flexing Test |
| ANSI/EIA/TIA-455-15A-1992 | 光學纖維元件的高度/浸入試驗 | Altitude/Immersion of Fiber Optic Components |
| ANSI/EIA/TIA-455-37-1993 | 纖維光學電纜高低溫的彎曲試驗 | Fiber Optic Cable Bend Test, Low and High Temperature |
| ANSI/IPC 4110-1998 | 確定印制電路板用非織物纖維素基紙板板特性的鑒定方法和規范 | Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards |
| ANSI/IPC 4412-2002 | 印制電路板用由"E"級玻璃纖維絲機織的精制織物規范 | Specification for Finished Fabric Woven from "E" Glass for Printed Boards |
| ANSI/NCCLS H8-A 2-1997 | 用乙酸纖維素電泳法檢測反常血紅蛋白 | Abnormal Hemoglobin Using Cellulose Acetate Electrophoresis, Detection of |
| ANSI/NFPA 40-2007 | 硝酸纖維膠片的存儲和處置標準 | Standard for the Storage and Handling of Cellulose Nitrate Film |
| ANSI/NFPA 42-1997 | 低氮硝化纖維素塑料的存儲 | Pyroxylin Plastic, Storage of |
| ANSI/SCTE 122-2006 | 美國有線電視通信工程師協會(SCTE)推薦廠外分插復用器用光導纖維電纜類型 | SCTE Recommended Optical Fiber Cable Types for Outside Plant Drop Applications |
| ANSI/SCTE 25-1-2002 | 混合光導纖維/同軸電纜廠外狀態監測.物理層 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer |
| ANSI/SCTE 25-2-2002 | 混合光導纖維/同軸電纜廠外狀態監測.中速存取控制(MAC)層 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer |
| ANSI/SCTE 83-3-2004 | 混合纖維/同軸內置設備狀況監控SCTE-HMS-HMTS-MIB管理信息庫定義 | Hybrid Fiber/Coax Inside Plant Status Monitoring SCTE-HMS-HMTS-MIB Management Information Base (MIB) Definition |
| ANSI/TIA TR-1029-2004 | IEC 61282-3 纖維光學通信系統設計指南.第3部分:偏振模式色散的計算 | IEC 61282-3 Fibre Optic Communication System Design Guides - Part 3: Calculation of Polarizatioon Mode Dispersion |
| ANSI/TIA-1026-2004 | IEC 61282-5纖維光學通信系統設計指南.第5部分:色散的調節和補償 | IEC 61282-5 Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion |
| ANSI/TIA-1048-2005 | IEC 62005-7.纖維光學互聯器件和無源元件的可靠性.第7部分:守命應力制模 | IEC 62005-7 - Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 7: Life Stress Modeling |
| ANSI/TIA-440-B-2004 | 纖維光學術語和定義 | Fiber Optic Terms and Definitions |
| ANSI/TIA-455-104A-1993 | 纖維光纜循環彎曲試驗 | Fiber Optic Cable Cyclic Flexing Test |
| ANSI/TIA-455-161-1996 | 溫度和濕度老化對光學纖維機械特性影響的測量程序 | Procedure for Measuring Temperature and Humidity Aging Effects on Mechanical Characteristics of Optical Fibers |
| ANSI/TIA-455-16A-2000 | 纖維光學元件的鹽霧(腐蝕)試驗 | Salt Spray (Corrosion) Test for Fiber Optic Components |
| ANSI/TIA-455-178-B-2003 | FOTP-178 IEC 60793-1-32 光學纖維.第1-32部分:測量方法和試驗規程.涂層可剝離性 | FOTP-178 IEC 60793-1-32 Optical Fibers - Part 1-32: Measurement Methods and Test Procedures - Coating Stripability |
| ANSI/TIA-455-194-1999 | 光纖連接器的纖維回推力測量 | Measurement of Fiber Pushback in Optical Connectors |
| ANSI/TIA-455-195-A-2003 | 光學纖維涂層的幾何學測量.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/TIA-455-20-B-2004 | 纖維光學.光學傳輸中的變化測量 | Fiber Optics - Measurement of Change in Optical Transmittance |
| ANSI/TIA-455-224-2002 | FOTP224.纖維光學色散試驗組的校準 | FOTP224 - Calibration of Fibre Optic Chromatic Dispersion Test Sets |
| ANSI/TIA-455-225-2002 | FOTP225.纖維光學幾何試驗組的校準用端面圖像分析程序 | FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets |
| ANSI/TIA-455-227-2002 | FOTP-227-IEC 61300.纖維光學裝置和無源元器件.基本試驗和測量程序.第3-24部分:檢查和測量.偏振保持光纖用 | FOTP-227-IEC 61300- Fiber Optic Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre |
| ANSI/TIA-455-231-2003 | IEC 61315.纖維光學功率計的校準 | IEC 61315 - Calibration of Fibre-Optic Power Meters |
| ANSI/TIA-455-235-2004 | FOTP235.IEC 61280-2-8纖維光學通信子系統試驗過程.數字系統.第2-8部分:使用Q-因子測量法測定低BER | FOTP235 - IEC 61280-2-8 Fibre Optic Communication Subsystem Test Procedures - Digital Systems - Part 2-8: Determination of Low BER Using Q-Factor Measurements |
| ANSI/TIA-455-236-2004 | FOTP236.IEC 61280-2-9.纖維光學通信子系統試驗過程.第2-6部分:數字系統.密集波分多路復用系統的光學信噪比 | FOTP236 - IEC 61280-2-9 - Fibre Optic Communication Subsystem Test Procedures - Part 2-6: Digital Systems - Optical Signal-to-Noise Ratio Measurement for Dense Wavelength-Division Multiplexed Systems |
| ANSI/TIA-455-25C-2002 | 纖維光纜組件的反復沖擊試驗 | Repeated Impact Testing of Fiber Optic Cable Assemblies |
| ANSI/TIA-455-32A-1990 | 纖維光學線路間斷性試驗 | Fiber Optic Circuit Discontinuities |
| ANSI/TIA-455-34A-1995 | 纖維光學.互連接裝置插入損耗試驗 | Fiber Optics - Interconnection Device Insertion Loss Test |
| ANSI/TIA-455-43A-1999 | 光學波導纖維的輸出近場輻射圖形測量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/TIA-455-4C-2002 | 纖維光學.元部件的溫度壽命試驗 | Fiber Optics - Component Temperature Life Test |
| ANSI/TIA-455-56B-1995 | 評價光波導纖維和光纜耐霉菌性能的試驗方法 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/TIA-455-57-B-1994 | 試驗用光學纖維端面的制備和檢驗 | Preparation and Examination of Optical Fiber Endface Testing Purposes |
| ANSI/TIA-455-72-1997 | 光學纖維光特性受溫度和濕度循環影響的評估方法 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Optical Characteristics of Optical Fiber |
| ANSI/TIA-455-73-1997 | 光學纖維機械特性受溫度和濕度循環影響的評估方法 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Mechanical Characteristics of Optical Fiber |
| ANSI/TIA-568-B.1-3-2003 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件3.根據纖維類型決定的光纖設備的可支持距離和信道衰減 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA-568-B.1-4-2003 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件4. 第6類850nm激光優選的50/125微米多模纖維的鑒別 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA-604-10A-2002 | 纖維光學連接器互配性標準 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-12-2000 | MT-RJ型纖維光學連接器互配性標準 | Fiber Optic Connector Intermateability Standard for Type MT-RJ |
| ANSI/TIA-604-13-A-2004 | FOCIS 13.纖維光學連接器互配性標準.SFOC 1.25型 | FOCIS 13 - Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 |
| ANSI/TIA-604-15-2003 | FOCIS 15.纖維光學連接器互配性標準.MF型 | FOCIS 15 - Fiber Optic Connector Intermateability Standard - Type MF |
| ANSI/TIA-604-16-A-2004 | FOCIS 16.纖維光學連接器互配性標準.LSH型 | FOCIS 16 - Fiber Optic Connector Intermateability Standard - Type LSH |
| ANSI/TIA-604-2-B-2004 | 纖維光學連接器互配性標準 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-3-B-2004 | 纖維光學連接器互配性標準 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-4-1997 | 纖維光學連接器互配性標準 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-4-B-2004 | FOCIS4.纖維光學連接器互配性標準.FC和FC-APC型 | FOCIS4 - Fiber Optic Connector Intermateability Standard, Type FC and Type FC-APC |
| ANSI/TIA-604-6-1999 | 纖維光學連接器互配性標準(光纖插孔連接器) | Fiber Optic Connector Intermateability Standard (Fiber Jack Connector) |
| ANSI/TIA-604-7A-2002 | FOCIS-7纖維光學連接器互配性標準 | FOCIS-7, Fiber Optic Connector Intermateability Standard |
| ANSI/TIA/EIA 455-131-1997 | 光導纖維帶剩余扭力應變的測量 | Measurement of Optical Fiber Ribbon Residual Twist |
| ANSI/TIA/EIA 455-188-1991 | 新提案 FOTP.纖維光學元部件的低溫試驗 | Proposed New FOTP, Low-Temperature Testing of Fiber Optics Components |
| ANSI/TIA/EIA 455-194-1999 | 光纖連接器的纖維回推力測量 | Measurement of Fiber Pushback in Optical Connectors |
| ANSI/TIA/EIA 455-201-2001 | 極化固定纖維或極化纖維軟導線裝置和電纜組件的回程損耗 | Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-203-2001 | 分級指示多模纖維傳輸器的投入動力分配測量程序 | Launched Power Distribution Measurement Procedure for Graded-Index Multi-mode Fiber Transmitters |
| ANSI/TIA/EIA 455-224-2002 | FOTP224.纖維光學色散試驗組件的校準 | FOTP224 - Calibration of Fibre Optic Chromatic Dispersion Test Sets |
| ANSI/TIA/EIA 455-225-2002 | FOTP225.纖維光學幾何試驗組件的校準用端面圖像分析規程 | FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets |
| ANSI/TIA/EIA 455-227-2002 | FOTP-227-IEC 61300.纖維光學器件和無源元件.基本試驗和測量程序.第3-24部分:檢查和測量.采用偏振保持光纖 | FOTP-227-IEC 61300- Fiber Optic Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre |
| ANSI/TIA/EIA 455-24-1991 | 單模纖維水峰值衰減測量 | Water Peak Attenuation Measurement of Single-Mode Fibers |
| ANSI/TIA/EIA 455-43A-1999 | 光學波導纖維的輸出近場輻射圖形測量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/TIA/EIA 455-4C-2002 | 纖維光學元件溫度壽命試驗 | Fiber Optics - Component Temperature Life Test |
| ANSI/TIA/EIA 455-56B-1995 | 評價光導纖維和光纜的抗菌能力 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/TIA/EIA 455-60-A-2000 | 利用OTDR進行纖維和光纜長度測量 | Measurement of Fiber or Cable Length Using an OTDR |
| ANSI/TIA/EIA 455-69-A-1991 | 對光學纖維最低和最高暴露溫度評價的試驗方法 | Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers |
| ANSI/TIA/EIA 455-71-A-1999 | 溫度沖擊對纖維光學元部件影響的測量方法 | Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
| ANSI/TIA/EIA 455-72-1997 | 循環暴露于溫度和濕度對光纖維的光學特性影響的評定程序 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Optical Characteristics of Optical Fiber |
| ANSI/TIA/EIA 455-73-1997 | 循環暴露于溫度和濕度對光纖維的機械特性影響的評定程序 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Mechanical Characteristics of Optical Fiber |
| ANSI/TIA/EIA 455-75A-1996 | 光導纖維的浸液試驗 | Fluid Immersion Test for Optical Waveguide Fiber |
| ANSI/TIA/EIA 455-80B-1998 | 用傳輸功率測量散單模纖維的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-81-B-2000 | 填充式纖維光纜用流體化合物 (滴) | Compound Flow (Drip) Test for Filled Fiber Optic Cable |
| ANSI/TIA/EIA 455-98-A-1983 | 外部纖維光纜外部冷凍試驗 | External Fiber Optic Cable External Freezing Test |
| ANSI/TIA/EIA 492CAAA-1998 | IVa級非色散位移單模式光學纖維的詳細規范 | Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers |
| ANSI/TIA/EIA 568-B.1-3-2003 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄3.根據纖維類型決定的光纖設備的可支持距離和信道衰減 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA/EIA 568-B.1-4-2003 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄4.類別6、850nm激光優選50/125微米多模纖維 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA/EIA 587-1992 | 纖維光學圖形符號 | Fiber Optic Graphic Symbols |
| ANSI/TIA/EIA 604-4-A-2000 | 纖維光學連接器相互配合性標準(FOCIS) | Fiber Optic Connector Intermateability Standards (FOCIS) |
| ANSI/TIA/EIA 604-4A-2000 | 纖維光學連接器配合性標準(FOCIS) | Fiber Optic Connector Intermateability Standards (FOCIS) |
| ANSI/UL 746E-2007 | 聚合材料的安全標準.工業層壓薄板、纖維纏繞管材、硫化纖維和印刷電路板用材料 | Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards |
| ASME BPVC Section 10-2001 | ASME鍋爐和壓力容器規程.第10節:纖維增強塑料壓力容器 | (ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels) |
| ASTM A 820/A 820M-2006 | 纖維加筋混凝土用鋼纖維的標準規范 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
| ASTM A 974-1997 | 焊線纖維金屬筐和金屬絲網的標準規范.(金屬涂層或聚氯乙烯(PVC)涂層) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM C 1014-2003 | 噴施的礦物纖維吸熱和吸音絕緣材料標準規范 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1015-2006 | 纖維素和礦物纖維松充填熱絕緣料裝配的標準規范 | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 1050-1991 | 剛性蜂窩狀聚氨基甲酸乙酯--纖維素纖維組合屋面絕緣材料 | Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation |
| ASTM C 1071-2005 | 纖維玻璃管道襯里絕緣材料(隔熱和吸音材料)標準規范 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1086-1996 | 玻璃纖維油毛氈的熱絕緣標準規范 | Standard Specification for Glass Fiber Felt Thermal Insulation |
| ASTM C 1096-1991 | 石棉水泥中木纖維含量的測定方法 | Test Method for Determination of Wood Fiber in Asbestos Cement |
| ASTM C 1101/C 1101M-2006 | 絕熱礦物纖維氈及板撓性或剛性分類的標準試驗方法 | Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation |
| ASTM C 1104/C 1104M-2000 | 測定未覆面礦物纖維絕緣材料蒸汽的吸收率的標準試驗方法 | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 1116/C 1116M-2006 | 纖維加固混凝土的標準規范 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 1139-1990 | 軍事用玻璃纖維絕熱和隔音用覆蓋層和板 | Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications |
| ASTM C 1149-2006 | 自支撐噴涂纖維素質絕熱材料的標準規范 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1154-2006 | 無石棉的纖維增強水泥制品的標準術語 | Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products |
| ASTM C 1177/C 1177M-2006 | 用作防水層的玻璃纖維襯墊石膏基底標準規范 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 1178/C 1178M-2006 | 涂玻璃纖維襯墊防水石膏背板的標準規范 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 1185-2003 | 無石棉纖維水泥平面薄板、屋面板、側墻面板和護墻板取樣和試驗用標準試驗方法 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM C 1186-2007 | 平面無石棉的纖維水泥薄板的標準規范 | Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets |
| ASTM C 1225-2004 | 無石棉纖維水泥屋面板、蓋屋板和石板瓦的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates |
| ASTM C 1228-1996 | 玻璃纖維增強混凝土的撓性及沖洗試驗用試樣的制備標準實施規程 | Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete |
| ASTM C 1229-1994 | 玻璃纖維增強混凝土中玻璃纖維含量測定的標準試驗方法(沖洗試驗) | Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test) |
| ASTM C 1230-1996 | 玻璃纖維增強混凝土焊接區的拉伸性能試驗的標準試驗方法 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM C 1275-2000 | 室溫下用實心矩形截面試樣進行連續纖維增強高級陶瓷恒定抗拉性能的標準試驗方法 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| ASTM C 1278/C 1278Ma-2007 | 纖維強化石膏板用標準規范 | Standard Specification for Fiber-Reinforced Gypsum Panel |
| ASTM C 1288-1999 | 單塊非石棉纖維水泥內襯底薄板的標準規范 | Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets |
| ASTM C 1290-2006 | 外部隔熱HVAC導管用柔性纖維玻璃氈隔熱材料的標準規范 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1292-2000 | 室溫下連續纖維增強高級陶瓷剪切強度的標準試驗方法 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1320-2005 | 輕型框架結構用礦物纖維毛層和隔熱毯的標準安裝規程 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
| ASTM C 1325-2004 | 纖維氈增強的無石棉水泥內襯薄板的標準規范 | Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets |
| ASTM C 1335-2004 | 人造巖石和爐渣礦物纖維隔熱材料的非纖維質含量測量用的標準試驗方法 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| ASTM C 1336-1996 | 夾雜滲渣的纖維非氧化陶瓷增強樣品的標準操作 | Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions |
| ASTM C 1337-1996 | 高溫抗拉載荷下連續纖維增強陶瓷合成物的蠕變和蠕變斷裂的標準試驗方法 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures |
| ASTM C 1341-2006 | 連續纖維增強高級陶瓷合成物的彎曲特性的標準試驗方法 | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites |
| ASTM C 1355/C 1355M-1996 | 玻璃纖維增強石膏成份的標準規范 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1358-2005 | 室溫下帶實心矩形截面試樣的連續纖維增強高級陶瓷的單值抗壓強度試驗的標準試驗方法 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures |
| ASTM C 1359-2005 | 高溫下帶實心矩形截面試樣的連續纖維增強高級陶瓷的單值抗拉強度試驗的標準試驗方法 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures |
| ASTM C 1360-1996 | 室溫下連續纖維增強高級陶瓷的等高度、軸向的和雙向拉伸循環疲勞強度的標準規程 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1381-1997 | 模制玻璃纖維增強石膏部件的標準規范 | Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1393a-2000 | 管子和容器用垂直向礦物纖維薄板卷和薄板熱絕緣的標準規范 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
| ASTM C 1399a-2007 | 獲得纖維增強混凝土的平均殘余強度的標準試驗方法 | Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete |
| ASTM C 1425-2005 | 高溫下1-D和2-D連續纖維增強高級陶瓷層間剪切強度測定的標準試驗方法 | Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM C 1447/C 1447M-2004 | 非石棉纖維水泥地下排水管的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1448/C 1448M-2005 | 無石棉纖維水泥導管的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM C 1449/C 1449Ma-2005 | 無石棉的纖維水泥制常壓下水管的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM C 1450/C 1450M-2004 | 非石棉纖維水泥排雨水管的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1459-2004 | 無石棉纖維增強水泥蓋屋板、屋頂板和屋面石板系統的性能的標準規范 | Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems |
| ASTM C 1467/C 1467M-2000 | 模制玻璃纖維增強石膏部件安裝的標準規范 | Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1468-2006 | 室溫下連續纖維增強高級陶瓷轉換厚度抗拉強度的標準試驗方法 | Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature |
| ASTM C 1488-2004 | 纖維素疏松填充絕緣材料模擬老化的標準實施規程 | Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation |
| ASTM C 1497-2004 | 纖維素纖維穩定熱絕緣材料標準規范 | Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 1511-2004 | 玻璃纖維絕緣材料(飛行器型)的水分保持(抵抗性)特征測定的標準試驗方法 | Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type) |
| ASTM C 1530-2004 | 設計成可變輪廓和厚度的無石棉纖維水泥屋頂蓋板、屋面板和石板的標準規范 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM C 1550-2005 | 纖維增強混凝土撓曲韌性的標準試驗方法(利用中心負載圓形板) | Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) |
| ASTM C 1557-2003 | 纖維的抗拉強度及楊氏模量的標準試驗方法 | Standard Test Method for Tensile Strength and Young's Modulus of Fibers |
| ASTM C 1559-2004 | 玻璃纖維襯墊絕緣材料芯吸性測定的標準試驗方法(飛行器類型) | Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
| ASTM C 1560-2003 | 玻璃纖維增強的水泥基混合物的熱水加速老化的標準試驗方法 | Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites |
| ASTM C 1574-2004 | 噴射松填充礦物纖維熱絕緣材料膨脹密度測定的標準指南 | Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation |
| ASTM C 1579-2006 | 限制纖維加筋混凝土的塑料收縮破裂評定的標準試驗方法（用一個鋼格子插入物） | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM C 1609/C 1609M-2006 | 纖維增強混凝土的彎曲性能的標準試驗方法(用三點支梁負荷法) | Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) |
| ASTM C 1629/C 1629M-2006 | 抗機械損傷的未裝飾的內部石膏板產品和纖維加強水泥板的標準分類 | Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels |
| ASTM C 1658/C 1658M-2006 | 玻璃纖維石膏板的標準規范 | Standard Specification for Glass Mat Gypsum Panels |
| ASTM C 1666/C 1666M-2007 | 玻璃纖維增強水泥(GFRC)和纖維增強混凝土及水泥用耐堿(AR)玻璃纖維的標準規范 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| ASTM C 195-2000 | 礦物纖維隔熱水泥的標準規范 | Standard Specification for Mineral Fiber Thermal Insulating Cement |
| ASTM C 208-1995 | 纖維質纖維隔熱板標準規范 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 209a-2007 | 纖維質纖維絕熱板用標準試驗方法 | Standard Test Methods for Cellulosic Fiber Insulating Board |
| ASTM C 336-1971 | 用纖維伸長法測定玻璃的軟化點和應變點的試驗方法 | Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation |
| ASTM C 449/C 449M-2000 | 礦物纖維水硬化隔熱水泥和精細水泥的標準規范 | Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
| ASTM C 458-1998 | 石棉水泥制品中有機纖維含量的標準試驗方法 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM C 547-2007 | 礦物纖維管絕緣的標準規范 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 551-1998 | 石棉水泥纖維絕緣板標準規范 | Standard Specification for Asbestos-Cement Fiberboard Insulating Panels |
| ASTM C 553-2002 | 商用和工業用礦物纖維氈隔熱的標準規范 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM C 581-2003 | 液體設備用的玻璃纖維增強結構用熱固性樹脂耐化學腐蝕性測定的標準實施規范 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM C 592-2004 | 礦物纖維氈隔熱材料和氈型管隔熱材料(工業型,金屬網覆蓋的)標準規范 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 612-2004 | 隔熱的礦物纖維塊材和板材標準規范 | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
| ASTM C 653-1997 | 建筑物隔熱用低密度礦物纖維氈阻熱系數的測定的標準指南 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation |
| ASTM C 665-2006 | 輕型結構和人造框架用礦質纖維氈絕熱材料標準規范 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 667-1992 | 環境溫度空氣以上管道操作和設備的預制纖維反射絕緣的標準規范 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
| ASTM C 686-1990 | 礦質纖維絨及氈式絕熱材料的分離強度的標準試驗方法 | Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
| ASTM C 720-1989 | 升溫用的噴制纖維絕熱材料的規格 | Spray-Applied Fibrous Thermal Insulation for Elevated Temperature |
| ASTM C 725-1990 | 半密實的礦物纖維板壁規格 | Semidense Mineral Fiber Siding |
| ASTM C 726-2005 | 屋面用礦物纖維絕緣板標準規范 | Standard Specification for Mineral Fiber Roof Insulation Board |
| ASTM C 739b-2005 | 纖維素纖維疏松填充絕熱材料的標準規范 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 762-1986 | 高溫下用噴制纖維熱絕緣材料應用規程 | Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures |
| ASTM C 764a-2006 | 礦物纖維疏松填充熱絕緣材料的標準規范 | Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 800-2005 | 玻璃纖維氈絕熱材料(飛機型)的標準規范 | Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type) |
| ASTM C 846-1994 | 檣護蔽用絕熱纖維板的應用程序的標準實施規程 | Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing |
| ASTM C 892-2005 | 高溫纖維氈絕熱的標準規范 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C 947-2003 | 薄剖面玻璃纖維增強混凝土撓曲特性的試驗方法(使用1/3跨度點荷載的簡支梁) | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM C 948-1981 | 玻璃纖維增強混凝土薄片的干和濕體密度、吸水率和表觀孔隙率的試驗方法 | Test Method for Dry and Wet Bulk Density, Water Absorption and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete |
| ASTM C 991-2003 | 金屬建筑物用撓性玻璃纖維絕緣材料標準規范 | Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings |
| ASTM C 995-1994 | 通過翻轉的坍落度筒測定纖維增強混凝土流動時間的標準試驗方法 | Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone |
| ASTM D 1030-1995 | 紙和紙板纖維分析的標準試驗方法 | Standard Test Method for Fiber Analysis of Paper and Paperboard |
| ASTM D 1037a-2006 | 木質纖維和碎料板材料性能評估的標準試驗方法 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1060-1996 | 為測定凈毛纖維百分率從成包原毛中心取樣的標準規程 | Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present |
| ASTM D 1118-1995 | 石棉纖維和石棉織物磁參數的標準測試方法 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 1233-1988 | 韌皮纖維和葉纖維制雙股線 | Twine Made from Bast and Leaf Fibers |
| ASTM D 1282-2005 | 用氣流阻力表示羊毛毛條、生條和洗凈羊毛的平均纖維直經的標準試驗方法 | Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool |
| ASTM D 1294-2005 | 1英寸(25.4毫米)規準長度羊毛纖維束的拉伸強度和斷裂強度的標準試驗方法 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length |
| ASTM D 1343-1995 | 用落球法測定纖維素衍生物粘度的標準試驗方法 | Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method |
| ASTM D 1348-1994 | 纖維素中濕度的標準測試方法 | Standard Test Methods for Moisture in Cellulose |
| ASTM D 1439-2003 | 羧甲基纖維素鈉鹽的標準試驗方法 | Standard Test Methods for Sodium Carboxymethylcellulose |
| ASTM D 1440-2007 | 棉花纖維的長度和長度分布的標準試驗方法(列陣法) | Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method) |
| ASTM D 1441-2006 | 試驗用棉纖維取樣的標準操作規程 | Standard Practice for Sampling Cotton Fibers for Testing |
| ASTM D 1442-2006 | 棉纖維成熟度的標準試驗方法(燒堿膨脹與偏振光法) | Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures) |
| ASTM D 1445-2005 | 棉纖維的斷裂強度和伸長率的標準試驗方法(扁纖維束法) | Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method) |
| ASTM D 1447-2000 | 用纖維照影機測量法測定棉纖維的長度和長度均勻度的標準試驗方法 | Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement |
| ASTM D 1448-2005 | 棉纖維的馬克隆尼讀數的標準試驗方法 | Standard Test Method for Micronaire Reading of Cotton Fibers |
| ASTM D 1554-2001 | 與木基纖維和刨花板材料相關的標準術語 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1562-2005 | 纖維素醋酸酯丙酸酯模制和擠制化合物的標準規范 | Standard Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds |
| ASTM D 1574-2004 | 羊毛和其它動物纖維中可萃取物的標準試驗方法 | Standard Test Method for Extractable Matter in Wool and Other Animal Fibers |
| ASTM D 1575-1990 | 洗凈羊毛及生條中羊毛纖維長度的測試方法 | Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver |
| ASTM D 1577-2007 | 紡織纖維線密度的標準試驗方法 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 1668a-1997 | 屋頂和防水用玻璃纖維織物(機織并經處理)的標準規范 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM D 1695-2007 | 纖維素和纖維素誘導生成物標準術語 | Standard Terminology of Cellulose and Cellulose Derivatives |
| ASTM D 1696-1995 | 纖維素在氫氧化鈉中溶解度的標準試驗方法 | Standard Test Method for Solubility of Cellulose in Sodium Hydroxide |
| ASTM D 1720-2003 | 硝酸纖維素溶液中活性溶劑稀釋比的標準試驗方法 | Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions |
| ASTM D 1770-1994 | 羊毛條中毛結,植物性物質與有色纖維含量標準測試方法 | Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top |
| ASTM D 1774-1994 | 紡織品纖維彈性特性的測試方法 | Test Methods for Elastic Properties of Textile Fibers |
| ASTM D 1795-1996 | 纖維素固有粘度的標準試驗方法 | Standard Test Method for Intrinsic Viscosity of Cellulose |
| ASTM D 1874-1962 | 纖維板船運箱頂蓋自動機密封用水可溶或溶劑可溶的液體膠粘劑 | Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
| ASTM D 1909-2004 | 紡織纖維商業公定回潮率標準表 | Standard Table of Commercial Moisture Regains for Textile Fibers |
| ASTM D 1926-2000 | 纖維素羧基含量的測試方法 | Standard Test Methods for Carboxyl Content of Cellulose |
| ASTM D 1974-1998 | 纖維板箱封口、密封及加固方法的標準實施規范 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 1996-1997 | 用液相色譜法(LC)測定低濃度聚乙烯中酚醛抗氧劑和棕櫚纖維酰胺潤滑添加劑的試驗方法 | Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) |
| ASTM D 1997-1991 | 用干燥物質作泥炭樣品纖維含量的試驗室測定的測試方法 | Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
| ASTM D 2102-2002 | 織物纖維收縮性的標準試驗方法 | Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) |
| ASTM D 2105-2001 | 玻璃纖維增強熱固樹脂管縱向抗張?zhí)匦缘臉?biāo)準試驗方法 | Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ASTM D 2130-1990 | 顯微投影法測定羊毛和其它動物纖維直徑的標準試驗方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection |
| ASTM D 2165-1994 | 羊毛及類似動物纖維的水萃取物pH值的標準測試方法 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
| ASTM D 2291-2003 | 玻璃纖維樹脂復合物用環形試樣制作的標準實施規范 | Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
| ASTM D 2310-2006 | 機制的玻璃纖維增強熱固樹脂管的標準分類方法 | Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2343-2003 | 增強塑料用玻璃纖維單紗、紗線和粗紗抗拉特性的標準試驗方法 | Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
| ASTM D 2363-1979 | 羥基丙基甲基纖維素的標準試驗方法 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM D 2364-2001 | 羥基乙基纖維素的標準試驗方法 | Standard Test Methods for Hydroxyethylcellulose |
| ASTM D 2402-2007 | 紡織纖維的保水性用標準試驗方法(離心機法) | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
| ASTM D 2494-2002 | 紗線或人造纖維或纖維束貨包的商業質量的標準試驗方法 | Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
| ASTM D 2497-2007 | 人造有機纖維長絲單紗用標準公差 | Standard Tolerances for Manufactured Organic-Base Filament Single Yarns |
| ASTM D 2524-1995 | 毛纖維抗斷裂強度的試驗方法.平列纖維束法.1/8英寸(3.2毫米)規范長度的標準試驗方法 | Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method- 1/8-in. (3.2-mm) Gage Length |
| ASTM D 2563-1994 | 玻璃纖維增強塑料層壓零件中可見缺陷分類的標準操作規程 | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts |
| ASTM D 2589-1988 | 石棉纖維的麥克涅特濕法分類的標準試驗方法 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 2612-1999 | 靜態試驗條件下紗條和毛條中纖維粘附力的標準試驗方法 | Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests |
| ASTM D 2641-1989 | 纖維素中氯的測試方法 | Test Method for Chlorine in Cellulose |
| ASTM D 2658-2004 | 測定纖維板盒內部尺寸的標準試驗方法(箱形量規法) | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 2752-1988 | 石棉纖維透氣性的標準試驗方法 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM D 276a-2000 | 識別紡織品中纖維的標準試驗方法 | Standard Test Methods for Identification of Fibers in Textiles |
| ASTM D 2824-2006 | 無纖維增強、石棉纖維增強和無石棉的纖維增強的填充鋁顏料的瀝青屋面涂層標準規范 | Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D 2839-2005 | 利用熔體指數纖維測定聚乙烯密度的標準實施規程 | Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene |
| ASTM D 2860-1990 | 90度角和固定應力條件下壓合帶與纖維板的粘著性的試驗方法 | Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Degree Angle and Constant Stress |
| ASTM D 2860/D 2860M-2004 | 在90角度和恒定應力下纖維板上壓敏膠紙帶粘合性的標準試驗方法 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress |
| ASTM D 2925-2001 | 在滿管水流情況下玻璃纖維增強熱固樹脂管射束偏轉的標準試驗方法 | Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ASTM D 2929-1989 | 用X射線熒光法測定纖維素材料中硫含量的標準試驗方法 | Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence |
| ASTM D 2947-1988 | 石棉纖維篩選分析的試驗方法 | Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 2968-1995 | 用顯微投影法測定羊毛和其它動物纖維中的有髓纖維和死毛纖維的標準試驗方法 | Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection |
| ASTM D 2970/D 2970M-2004 | 玻璃長纖維制輪胎簾線、輪胎簾布和工業用紗的標準試驗方法 | Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments |
| ASTM D 2987-1988 | 石棉纖維水分含量的標準測試方法 | Standard Test Method for Moisture Content of Asbestos Fiber |
| ASTM D 2992-2006 | 玻璃纖維(增強的熱固樹脂玻璃纖維)管及配件用液體靜壓設計基礎標準實施規程 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ASTM D 2996-2001 | 纖維纏繞"纖維玻璃"(玻璃纖維增強熱固性樹脂管)標準規范 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2997-2001 | 離心鑄造"纖維玻璃"(玻璃纖維增強的熱固性樹脂)管的標準規范 | Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 301-1995 | 可溶性硝化纖維素的標準試驗方法 | Standard Test Methods for Soluble Cellulose Nitrate |
| ASTM D 3019-1994 | 用于無纖維增強、石棉纖維增強和無石棉的纖維增強瀝青屋頂卷材的搭接膠粘劑標準規范 | Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbestos Fibered |
| ASTM D 3025-2007 | 利用校正棉花標準化棉花纖維試驗結果的標準實施規范 | Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards |
| ASTM D 3133-2001 | 用紅外線光譜測定法對醇酸天然漆中硝酸纖維素定量測定的標準試驗方法 | Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry |
| ASTM D 3135-1987 | 粘合的、熔凝纖維的及疊層衣料的性能 | Performance of Bonded, Fused and Laminated Apparel Fabrics |
| ASTM D 3171-2006 | 用基質溶解法測定樹脂基質混合物中纖維含量的標準試驗方法 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3217-2007 | 環圈結或打結的人造紡織纖維斷裂強度標準試驗方法 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM D 3218-2007 | 聚烯烴單纖維絲標準規范 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 3262-2006 | 玻璃纖維增強熱固性樹脂污水管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D 3277-1995 | 經油浸漬的纖維素絕緣材料含水量的標準試驗方法 | Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation |
| ASTM D 3299-2000 | 纖維纏繞的玻璃纖維增強熱固樹脂耐腐蝕容器的標準規范 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 3333-2007 | 紡紗用人造短纖維、長纖維或亞麻短纖維試驗取樣標準實施規范 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 3345-1974 | 木材及其他纖維素材料防白蟻破壞的實驗室評定方法 | Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM D 3353-2004 | 纖維絕緣磁性金屬絲的標準試驗方法 | Standard Test Methods for Fibrous-Insulated Magnet Wire |
| ASTM D 3512-2005 | 紡織物纖維的抗起球性及其它相關表面變化的標準試驗方法:無序轉筒起球試驗器 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
| ASTM D 3513-2002 | 人造短纖維中超長纖維含量的標準測試方法 | Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber |
| ASTM D 3514-2005 | 紡織物纖維的抗起球性及其它相關表面變化的標準試驗方法:彈性護墊 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
| ASTM D 3516-1989 | 灰化纖維素的標準試驗方法 | Standard Test Methods for Ashing Cellulose |
| ASTM D 3517-2006 | 玻璃纖維增強熱固性樹脂壓力管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D 3529/D 3529M-1997 | 碳纖維環氧樹脂預浸漬中樹脂固定含量的標準測試方法 | Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3531-1999 | 碳纖維環氧樹脂預浸料坯的樹脂流動性標準試驗方法 | Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3532-1999 | 碳纖維環氧樹脂預浸料坯凝固時間的標準試驗方法 | Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3552-1996 | 纖維增強金屬基復合材料的拉伸性能用標準試驗方法 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
| ASTM D 365-2001 | 可溶性硝酸纖維素基溶液的標準指南 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 3656-2004 | 涂乙烯的玻璃纖維紗編織的防蟲罩及排氣孔遮布的標準規范 | Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns |
| ASTM D 3681-2006 | 在偏轉條件下玻璃纖維(玻璃纖維增強熱固樹脂)管的耐化學腐蝕的標準試驗方法 | Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ASTM D 3753-2005 | 玻璃纖維增強聚酯檢查孔和導水井的標準規范 | Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells |
| ASTM D 3754-2006 | 玻璃纖維增強熱固性樹脂污水壓力管和工業壓力管的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ASTM D 3800-1999 | 高模數纖維密度的標準試驗方法 | Standard Test Method for Density of High-Modulus Fibers |
| ASTM D 3822-2007 | 單支紡織品纖維張力性能的標準試驗方法 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 3839-2002 | 玻璃纖維增強熱固樹脂管地下安裝的標準指南 | Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe |
| ASTM D 3840-2001 | 無壓設備用玻璃纖維增強熱固樹脂管配件標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ASTM D 3841-1997 | 玻璃纖維增強聚酯板標準規范 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM D 3876-1996 | 氣相色譜法測定纖維素乙醚制品中甲氧基和羥丙基取代物的標準試驗方法 | Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM D 3914-2002 | 擠拉制玻璃纖維增強塑料棒平面剪切強度的標準測試方法 | Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
| ASTM D 3916-2002 | 擠拉制玻璃纖維增強塑料棒抗拉特性的標準試驗方法 | Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
| ASTM D 3917-1996 | 熱固性玻璃纖維增強塑料擠拉制型材尺寸公差的標準規范 | Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes |
| ASTM D 3937-2007 | 紡紗用人造短纖維卷曲率的標準試驗方法 | Standard Test Method for Crimp Frequency of manufactured Staple Fibers |
| ASTM D 3971-1989 | 纖維素中二氯甲烷可溶物的標準試驗方法 | Standard Test Method for Dichloromethane-Soluble Matter in Cellulose |
| ASTM D 3982-2003 | 接觸模壓制玻璃纖維增強熱固性樹脂管和防護罩標準規范 | Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods |
| ASTM D 4018-1999 | 碳及石墨纖維束的連續長絲抗拉特性的標準試驗方法 | Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
| ASTM D 4024-2005 | 機制"纖維玻璃"(玻璃纖維增強的熱固性樹脂)法蘭的標準規范 | Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 4028-1996 | 涂乙烯的纖維玻璃紗編的日光罩的標準規范 | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4030-2004 | 玻璃纖維繩和縫紉線的標準規范 | Standard Specification for Glass Fiber Cord and Sewing Thread |
| ASTM D 4085-1993 | 原子吸收分光光度計對纖維素中金屬的試驗方法 | Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM D 4097-2001 | 接觸模壓的玻璃纖維增強熱固樹脂耐腐蝕罐標準規范 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 4102-1982 | 碳纖維的耐熱氧化性的試驗方法 | Test Method for Thermal Oxidative Resistance of Carbon Fibers |
| ASTM D 4120-2007 | 動態試驗下粗紗、紗條和毛條的纖維粘附力用標準試驗方法 | Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
| ASTM D 4161-2001 | 使用撓性彈性體密封件的"玻璃鋼"(玻璃纖維增強熱固樹脂)管接頭標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| ASTM D 4167-1997 | 纖維增強的塑料風扇和風機 | Standard Specification for Fiber-Reinforced Plastic Fans and Blowers |
| ASTM D 4209-2007 | 纖維素、乳化液、樹脂溶液、蟲漆和清漆的揮發物和非揮發物含量的測定用標準實施規程 | Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes |
| ASTM D 4250-1992 | 吸水纖維制品蓄水能力的試驗方法 | Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
| ASTM D 4330-1994 | 玻璃纖維船拋光劑和蠟評定的標準實施規程 | Standard Practice for Evaluation of Fiberglass Boat Polish and Wax |
| ASTM D 4354-1999 | 試驗用土工合成纖維織物的抽樣的標準操作規程 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4398-2007 | 用板單面曝光法測定玻璃纖維增強熱固樹脂的耐化學性的標準試驗方法 | Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ASTM D 4466-2002 | 多成分紡織纖維的標準術語 | Standard Terminology for Multicomponent Textile Fibers |
| ASTM D 4476-2003 | 纖維增強擠拉制塑料棒彎曲性能的標準試驗方法 | Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ASTM D 4510-2005 | 羊毛和其他動物纖維中粒子分裂計數的標準試驗方法 | Standard Test Method for Counting Particle Cleavages in Wool and Other Animal Fibers |
| ASTM D 4601-2004 | 屋面用瀝青覆層的玻璃纖維基薄板的標準規范 | Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing |
| ASTM D 4604-1995 | 高容量儀器測量棉纖維的標準試驗方法(運動控制纖維信息系統) | Standard Test Methods for Measurement of Cotton Fibers by High Volume Instruments (HVI) (Motion Control Fiber Information System) |
| ASTM D 4727/D 4727M-2007 | 波紋和實心纖維板坯料(包裝級)和切制形狀的標準規范 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 4770-2000 | 評定用于充填外衣的人造纖維棉絮的標準試驗方法 | Standard Test Method for Appearance and Integrity of Highloft Battting After Refurbishing |
| ASTM D 4771-2002 | 室內家具編織裝飾用纖維的標準性能規范 | Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture |
| ASTM D 4794-1994 | 用氣相色譜法測定纖維素醚產品中羥乙基替代物的標準試驗方法 | Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM D 4795-1994 | 可溶行硝化纖維素中氮含量的標準試驗方法.交替法 | Standard Test Method for Nitrogen Content of Soluble Nitrocellulose - Alternative Method |
| ASTM D 4849b-2002 | 與紗和纖維相關的標準術語 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 4881-2005 | 漆包纖維或薄膜纏繞磁線的耐熱性標準試驗方法 | Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire |
| ASTM D 4897-2001 | 屋面材料用瀝青涂覆玻璃纖維通風薄基板標準規范 | Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
| ASTM D 4900-1999 | 鞣皮提取物中木質磺酸鹽(亞硫酸鹽纖維素)的標準試驗方法 | Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts |
| ASTM D 4907-2000 | 皮革精制中硝化纖維素的標準試驗方法 | Standard Test Method for Nitrocellulose in Finish on Leather |
| ASTM D 4911-1994 | 平行精紡式開良精紡系統中手工織短纖維紗線的公差 | Tolerances for Man-Made Yarns Spun on the Parallel Worsted or Modified Worsted System |
| ASTM D 4970-2005 | 紡織纖維品的耐起球和其他相關表面變化的標準試驗方法(馬丁戴爾壓力檢驗機法) | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester) |
| ASTM D 5035-2006 | 紡織纖維的伸長率和斷裂力的標準試驗方法（剝離法） | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 5103-2007 | 人造短纖維的長度和長度分布用標準試驗方法(單纖維試驗) | Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
| ASTM D 5104-2002 | 紡織纖維收縮的標準試驗方法(單纖維試驗) | Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test) |
| ASTM D 5117-2003 | 固體玻璃纖維增強擠拉制坯料的染料滲透性標準試驗方法 | Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
| ASTM D 5118/D 5118Ma-2005 | 纖維板貨運箱制造的標準實施規程 | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM D 5168-2003 | 三層波紋纖維板集裝箱的制造和封閉的標準操作規程 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 519-2004 | 羊毛條中纖維長度的標準試驗方法 | Standard Test Method for Length of Fiber in Wool Top |
| ASTM D 5319-1997 | 玻璃纖維增強聚酯墻和頂棚鑲板的標準規范 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ASTM D 5330/D 5330M-2006 | 包裝用的纖維增強壓敏包裝帶的標準規范 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D 5359-1998 | 用于玻璃纖維的從廢物中回收的碎玻璃的標準規范 | Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber |
| ASTM D 5364-1993 | 燃煤單位玻璃纖維增強塑料煙囪襯里的設計,制造及安裝標準導則 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units |
| ASTM D 5365-2006 | "玻璃鋼"(玻璃纖維增強熱固樹脂)管長期環狀彎曲應變的標準試驗方法 | Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 5400-2003 | 羥基丙基纖維素標準試驗方法 | Standard Test Methods for Hydroxypropylcellulose |
| ASTM D 5421-2005 | 接觸模制玻璃纖維(玻璃-纖維-增強熱固性樹脂)法蘭的標準規范 | Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 5528-2001 | 單向纖維增強聚合母體復合材料I型層間斷裂韌性的標準試驗方法 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 5573-1999 | 纖維增強塑料(FRP)接合中失效方式分類的標準操作規程 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 5639/D 5639M-2005 | 根據性能要求對波紋狀纖維板材料和箱結構進行選擇的標準試驗方法 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 5651a-1995 | 木質纖維和碎料人造板表面粘結強度的標準試驗方法 | Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5677-2005 | 用于航空噴氣渦輪機燃料管線的膠粘劑結合型玻璃纖維(玻璃纖維增強熱固性樹脂)管及管配件標準規范 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ASTM D 5685-2005 | "玻璃纖維"(玻璃-纖維-增強熱固樹脂)壓力管配件的標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ASTM D 5722-2003 | 用集中自然光和浸水-凍結-解凍程序進行工廠涂覆壓花纖維板室外加速風化的標準規程 | Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
| ASTM D 578-2005 | 玻璃纖維絲標準規范 | Standard Specification for Glass Fiber Strands |
| ASTM D 5795-1995 | 硬質纖維板和其它混合板的吸水率測定的標準試驗方法 | Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via "Cobb Ring" Apparatus |
| ASTM D 580-2004 | 坯布機織玻璃纖維帶的標準規范 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 581-2007 | 機織玻璃纖維套管的標準規范 | Standard Specification for Glass Fiber Greige Braided Tubular Sleeving |
| ASTM D 5824-1998 | 纖維板暴露在熱和水條件下粘結強度測定的標準試驗方法 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 585-1997 | 紙張、紙板、纖維板和相關產品的單批取樣和驗收標準實施規程 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ASTM D 5866-2005 | 對棉纖維中棉結的標準試驗方法(AFIS-N儀器) | Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument) |
| ASTM D 5867-2005 | 用大容量儀器測量棉纖維物理性能的標準試驗方法 | Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments |
| ASTM D 5868-2001 | 纖維增強塑料粘結劑的邊緣剪切粘著性標準試驗方法 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 5896-1996 | 纖維素材料碳水化合物分配的標準試驗方法 | Standard Test Method for Carbohydrate Distribution of Cellulosic Material |
| ASTM D 5897-1996 | 電位滴定轉換法測定纖維素酯中羥基百分率的標準試驗方法 | Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method |
| ASTM D 6041-1997 | 接觸模制(玻璃纖維增強熱固樹脂)耐腐蝕管和配件標準規范 | Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ASTM D 6042-2004 | 用液相色譜法對聚丙烯均聚物配方中酚醛抗氧化劑和酰胺纖維潤滑添加劑測定的標準試驗方法 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| ASTM D 6115-1997 | 單向纖維增強聚合基質復合物的模式1疲勞分層增長開始的標準試驗方法 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 6162a-2000 | 使用聚合物和玻璃纖維增強材料結合的苯乙烯丁二烯苯乙烯(SBS)改良瀝青層材料的標準規范 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6163-2000 | 玻璃纖維增強的苯乙烯丁二烯苯乙烯(SBS)改良瀝青層材料的標準規范 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6188-1997 | 通過銅氨落球?qū)w維素黏度的標準試驗方法 | Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
| ASTM D 619-1999 | 電絕緣用硫化纖維的標準試驗方法 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 6223-2002 | 聚酯和玻璃纖維增強相結合的無規立構聚丙烯(APP)改良瀝青片材的標準規范 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6264-1998 | 與一集中的擬靜態壓痕力復合的纖維增強聚合物基質的耐破壞性測量的標準試驗方法 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| ASTM D 6298-2005 | 帶工廠用金屬表面的纖維玻璃增強苯乙烯-丁二烯-苯乙烯(SBS)改良瀝青片的標準規范 | Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface |
| ASTM D 6415/D 6415Ma-2006 | 測量纖維增強型聚合母體高聚物的曲梁強度的標準試驗方法 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM D 6466-1999 | 用Sirolan激光掃描纖維直徑分析儀測定羊毛和其它動物纖維直徑的標準試驗方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
| ASTM D 6477-2004 | 輪胎簾布、鋼絲圈、軟(筋)鋼絲和纖維布的相關標準術語 | Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics |
| ASTM D 6500-2000 | 用光導纖維直徑分析儀測定羊毛和其它動物纖維直徑的標準試驗方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser |
| ASTM D 6507-2000 | 復合材料用纖維增強定向規則的標準實施規程 | Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials |
| ASTM D 6509-2000 | 用玻璃纖維加筋法測定無規立構聚丙烯改良瀝青基薄板材的標準規范 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6590/D 6590M-2000 | 密封纖維容器和罐用的壓敏膠帶的標準規范 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D 6613-2002 | 測定尼龍或聚脂纖維尺寸的標準實施規程 | Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric |
| ASTM D 6652-2001 | 測定無紡織物留下的纖維狀碎屑的標準試驗方法 | Standard Test Method for Determining Fibrous Debris From Nonwoven Fabrics |
| ASTM D 6671/D 6671M-2006 | 單向纖維增強聚合物基質復合物的混合模式I-模式II層間斷裂韌性的標準試驗方法 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
| ASTM D 6685-2001 | 纖維制混凝土用織物的試驗方法的選擇的標準指南 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete |
| ASTM D 6757-2007 | 陡斜屋頂用包含無機纖維的屋面襯墊氈的標準規范 | Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing |
| ASTM D 6856-2003 | 纖維增強"紡織"復合材料測試的標準指南 | Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
| ASTM D 6942-2003 | 堿性環境中纖維素纖維穩定性的標準試驗方法 | Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 6961-2003 | 亞麻纖維顏色測量標準試驗方法 | Standard Test Method for Color Measurement of Flax Fiber |
| ASTM D 7018-2004 | 與玻璃纖維及其產品相關的標準術語 | Standard Terminology Relating to Glass Fiber and Its Products |
| ASTM D 7025a-2004 | 評估清潔亞麻纖維細度的標準試驗方法 | Standard Test Method for Assessing Clean Flax Fiber Fineness |
| ASTM D 7030-2004 | 用壓縮試驗器測試恒定負荷下波面纖維板容器的短期蠕變性能的標準試驗方法 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 706-2005 | 乙酸纖維素模制和擠制化合物的標準規范 | Standard Specification for Cellulose Acetate Molding and Extrusion Compounds |
| ASTM D 707-2005 | 乙酸丁酸纖維素模制與擠制化合物的標準規范 | Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
| ASTM D 710-1997 | 電絕緣用硫化纖維薄板、桿材和管標準規范 | Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation |
| ASTM D 7138-2007 | 測定合成纖維熔化溫度的標準試驗方法 | Standard Test Method to Determine Melting Temperature of Synthetic Fibers |
| ASTM D 7139-2005 | 棉纖維的標準術語 | Standard Terminology for Cotton Fibers |
| ASTM D 7154-2005 | 航空燃料凍結點的標準試驗方法(自動纖維光學法) | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
| ASTM D 7200-2006 | 用相位比對顯微鏡和相位傳輸顯微鏡取樣和計數礦場和采石場內的空氣纖維(包含石棉纖維)的標準實施規程 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy |
| ASTM D 7201-2006 | 用相位比對顯微鏡取樣和計數車間內的空氣纖維(包含石棉纖維)的標準實施規程 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with and Option of Transmission Electron Microscopy) |
| ASTM D 7205/D 7205M-2006 | 測量纖維增強聚合物基質復合棒拉伸特性的標準試驗方法 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM D 7291/D 7291M-2007 | 纖維增強聚合物復合材料沿厚度方向"平放朝上的"抗拉強度和彈性模數的標準試驗方法 | Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| ASTM D 7332/D 7332M-2007 | 測量纖維增強聚合物基復合材料緊固件耐拉伸性的標準試驗方法 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
| ASTM D 7337/D 7337M-2007 | 纖維增強聚合物基復合棒拉伸蠕變斷裂的標準試驗方法 | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM D 7357-2007 | 纖維加筋混凝土用纖維素纖維的標準規范 | Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete |
| ASTM D 7367-2007 | 液壓栽培用纖維覆蓋料持水能力的測定用標準試驗方法 | Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting |
| ASTM D 787-1996 | 乙基纖維模制和擠壓化合物的標準規范 | Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
| ASTM D 817-1996 | 乙酸丙酸纖維素和醋酸丁酸纖維素的標準試驗方法 | Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate |
| ASTM D 861-1995 | 用特克斯制命名纖維,紗的半制品,紗和其它紡織品線度的標準操作規程 | Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
| ASTM D 871-1996 | 測試乙酸纖維素的試驗方法 | Test Methods of Testing Cellulose Acetate |
| ASTM D 885-2007 | 人造有機纖維制成的輪胎簾線、輪胎簾布和工業長絲紗的標準試驗方法 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers |
| ASTM D 902-2006 | 電絕緣用柔性涂樹脂玻璃布和玻璃纖維絕緣帶的標準試驗方法 | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ASTM D 914-2000 | 乙基纖維的標準試驗方法 | Standard Test Methods for Ethylcellulose |
| ASTM E 1067-2007 | 玻璃纖維增強塑料樹脂(FRP)罐/容器的聲排放檢驗用標準實施規程 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 1309-2000 | 數據庫中纖維增強聚合物復合材料的識別的標準指南 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM E 1434-2000 | 記錄數據庫中纖維增強復合材料的機械試驗數的標準指南 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| ASTM E 1471-1992 | 計算機處理的材料性能數據庫中纖維、填充料和磁心材料的識別 | Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases |
| ASTM E 1576-1999 | 在空氣碳化硅晶須和纖維的環境中工作的工作人員的醫療監督計劃的標準指南 | Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers |
| ASTM E 1888/E 1888M-2007 | 帶輕質木心由玻璃纖維增強塑料制成的壓力容器聲音發出檢驗用標準實施規程 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 2076-2005 | 用聲輻射檢驗玻璃纖維增強塑料風扇葉片的標準試驗方法 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 2090-2006 | 利用光電子顯微鏡和掃描電子顯微鏡對清潔室擦刷工具釋放粒子和纖維的尺寸差異計數用標準試驗方法 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 2098-2000 | PB級外絕緣和涂層系統(EIFS)中使用的玻璃纖維增強網暴露于氫氧化鈉溶液后拉伸斷裂強度測定的標準試驗方法 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM E 2228-2002 | 紡織纖維的顯微鏡檢驗用標準指南 | Standard Guide for Microscopic Examination of Textile Fibers |
| ASTM E 2287-2003 | 單擊薄膜色帶和打印文本上斷裂字模和紙纖維印記檢驗的標準指南 | Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text |
| ASTM E 2478a-2006 | 用聲發射測定玻璃纖維增強塑料(FRP)材料基于損傷的設計應力用標準實施規程 | Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission |
| ASTM E 2581-2007 | 航天航空用聚合物基復合材料、夾層芯材和纖維纏繞壓力容器的剪切測量技術的標準實施規程 | Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications |
| ASTM E 574-2006 | 用玻璃纖維或硅纖維絕緣的雙重基礎金屬熱電偶絲的標準規范 | Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation |
| ASTM F 1092-2004 | 玻璃纖維擠拔制露天防風暴和方型護欄設備的標準規范 | Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems |
| ASTM F 1173-2001 | 船舶用熱固性樹脂玻璃纖維管道系統標準規范 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1195-1999 | 氣管插管術用硬質喉鏡.纖維發光手術刀及柄用鉤接式配件 | Standard Specification for Rigid Laryngoscopes for Tracheal Intubation-Hook on Fittings for Fiberilluminated Blades and Handles |
| ASTM F 1225-1999 | 測量膠片和纖維盒的打印帶出口力的測試方法 | Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges |
| ASTM F 1536-1995 | 水激活合成聚氨酯玻璃纖維矯型鑄帶強度和凝固時間測定的標準試驗方法 | Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape |
| ASTM F 1932-1998 | 測量睡袋紡織纖維回彈力的標準試驗方法 | Standard Test Method for Measuring Sleeping Bag Loft |
| ASTM F 2019-2003 | 通過玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)的現場拖拉安裝修復已有管道的標準操作規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 2075-2004 | 置于運動場設備下面和周圍的運動場安全表面用工程木纖維標準規范 | Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ASTM F 2087-2001 | 玻璃纖維編織繩和油繩的包裝標準規范 | Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick |
| ASTM F 2154-2001 | 多孔纖維玻璃布面的纖維玻璃吸聲板標準規范 | Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
| ASTM F 711-2002 | 火線工具用玻璃纖維增強塑料棒和管的標準規范 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM/ISO 51650-2005 | 醋酸纖維劑量測定系統使用的標準實施規程 | Standard Practice for Use of Cellulose Acetate Dosimetry Systems |
| IEEE 952-1997 | 單軸干涉儀式纖維光學旋轉羅盤的標準格式指南和試驗程序 | (Specification format guide and test procedure for single-axis interferometric fiber optic gyros) |
| IEEE N 322-1997 | 直接和間接示值石英纖維袖珍劑量計的檢驗和測試驗規范 | (Inspection, test, construction, and performance requirements for direct reading electrostatic/electroscope type dosimeters) |
| IEEE N 42.6-1980 | 石英纖維靜電計型曝光計和配套使用的曝光計的相互關系 | (Interrelationship of quarz-fiber electrometer type exposure meters and companion exposure meter chargers) |
| UL 1316-1994 | 石油產品、酒精和酒精汽油混合物用玻璃纖維增強塑料地下貯罐 | (Glass-fiber-reinforced plastic underground storage tanks for petroleum products, alcohols, and alcohol-gasoline mixtures ) |
| UL 1651-1997 | 光導纖維電纜 | (Optical fiber cable ) |
| UL 1713-2001 | 地下消防設備用玻璃纖維增強壓力管道和管聯接器 | (Pressure pipe and couplings, glass fiber-reinforced, for underground fire service ) |
| 編號 | 中文名稱 | 英文名稱 |