| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1133-21-1991 | 包裝規程.第21節:再生纖維素薄膜,塑料薄膜,鋁箔,撓性多層板和金屬化材料 | Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials |
| BS 1524-1993 | 乙酸纖維素制模材料規范 | Specification for cellulose acetate moulding materials |
| BS 1596-1992 | 纖維板圓筒規范 | Specification for fibreboard drums |
| BS 1771-2-1990 | 制服和工作服用織物.第2部分:用纖維素纖維、人造纖維與混合物制造的織物規范 | Fabrics for uniforms and workwear - Specification for fabrics from cellulosic fibres, synthetic fibres and blends |
| BS 1902-6-1986 | 耐火材料的試驗方法.第6部分:陶瓷纖維制品 | Methods of testing refractory materials - Ceramic fibre products |
| BS 1982-2-1990 | 有機材料制成或含有有機材料的板條制品的耐霉性.第2部分:抗纖維素分解微真菌性的測定方法 | Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to cellulose-decomposing microfungi |
| BS 2043-1968 | 用投影顯微鏡測定毛纖維細度的方法 | Method for the determination of wool fibre fineness by the use of a projection microscope |
| BS 2610-1978 | 棉與某些含纖維素人造纖維的銅銨溶液流動性的測定試驗方法 | Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres |
| BS 2782-10 Method 1001-1977 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1001:用巴科爾硬度計測量硬度 | Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
| BS 2782-10 Method 1002-1977 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1002:灼燒重量損失測定 | Methods of testing plastics - Glass reinforced plastics - Determination of loss on ignition |
| BS 2782-10 Method 1003-1977 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1003:拉伸性能測定 | Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties |
| BS 2782-10 Method 1004-1977 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1004:調節和試驗用標準大氣壓 | Methods of testing plastics - Glass reinforced plastics - Standard atmospheres for conditioning and testing |
| BS 2782-10 Method 1005-1977 | 塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1005:撓曲特性測定.三點法 | Methods of testing plastics - Glass reinforced plastics - Determination of flexural properties - Three point method |
| BS 2782-10 Method 1006-1978 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1006:合成樹脂浸漬玻璃纖維織物中揮發物和樹脂含量測定 | Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 2782-4 Method 470C-1991 | 塑料試驗方法.第4部分:化學性能.試驗方法470C:未增塑醋酸纖維素灰分測定 | Methods of testing plastics - Chemical properties - Determination of ash of unplasticized cellulose acetate |
| BS 2782-7 Method 721A-1988 | 塑料試驗方法. 第7部分:流變性能.試驗方法721A:樹脂浸漬玻璃纖維測定樹脂流失量 | Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric |
| BS 2880 Addendum No. 1-1959 | 醋酸纖維素片試驗方法 | Methods of testing cellulose acetate flake |
| BS 2880-1991 | 醋酸纖維素片的試驗方法 | Methods of testing cellulose acetate flake |
| BS 2F 142-1999 | 航空航天用抗水解的涂覆熱塑性聚合物聚氨酯彈性物的尼龍纖維 | Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes |
| BS 2X 27-1991 | 航空航天用纖維素表面光飾方案規范 | Specification for cellulose finishing scheme for aerospace purposes |
| BS 3181-1-1987 | 氣流法測定棉纖維性能.第1部分:單壓氣流法測定纖維細度值 | Methods for determination of cotton fibre properties by the airflow method - Determination of micronaire value by the single compression airflow method |
| BS 3183-1968 | 用氣流法測定羊毛纖維直徑的方法 | Method for the determination of wool fibre diameter by the airflow method |
| BS 3396-1-1991 | 塑料增強用的機織玻璃纖維織物.第1部分:坯布規范 | Woven glass fibre fabrics for plastics reinforcement - Specification for loom-state fabrics |
| BS 3396-2-1987 | 塑料增強用機織玻璃纖維織物.第2部分:退漿織物規范 | Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics |
| BS 3396-3-1987 | 塑料增強用機織玻璃纖維織物.第3部分:聚酯樹脂系統用成品布規范 | Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems |
| BS 3749-1991 | 聚酯和環氧樹脂裝置增強用的E形玻璃纖維粗紗織物規范 | Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems |
| BS 3762-3.15-1985 | 配制洗滌劑分析.第3部分:定量試驗方法.第15節:羧甲基纖維素含量估算方法 | Analysis of formulated detergents - Quantitative test methods - Method for estimation of carboxymethylcellulose content |
| BS 3953-1990 | 合成樹脂粘結的機織玻璃纖維布層壓板規范 | Specification for synthetic resin bonded woven glass fabric laminated sheet |
| BS 3958-3-1985 | 隔熱材料.金屬網面人造礦物纖維墊 | Thermal insulating materials - Metal mesh faced man-made mineral fibre mattresses |
| BS 3958-4-1982 | 隔熱材料.第4部分:粘結預制人造礦物纖維管型材 | Thermal insulating materials - Bonded preformed man-made mineral fibre pipe sections |
| BS 3958-5-1986 | 隔熱材料.第5部分:粘結人造礦物纖維板規范 | Thermal insulating materials - Specification for bonded man-made mineral fibre slabs |
| BS 3F 114-1995 | 每平方米重80克馬德波勒姆細布纖維規范 | Specification for 80 g/m2 cotton madapolam fabric |
| BS 3F 116-1995 | 絲光棉纖維規范 | Specification for mercerized cotton fabric |
| BS 4029-1978 | 單纖維與長纖維拉伸彈性恢復測定試驗方法(等速伸長試驗機) | Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines) |
| BS 4032-1978 | 纖維素纖維或合成纖維、紗線及織物或由這些纖維混紡的紗線及織物中水溶性或堿溶性添加劑測定的試驗方法 | Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres |
| BS 4044-1989 | 用梳片式纖維長度分析儀圖解法測定纖維長度的方法 | Methods for determination of fibre length by comb sorter diagram |
| BS 4048 Pts.1 & 2-1966 | 復合金屬絲繩索和纖維繩索規范.第1部分:復合繩索.第2部分:彈性絞索 | Specification for combined wire and fibre ropes. Combined ropes. Spring lay ropes |
| BS 4048 Pts.1 and 2-1966 | 復合鋼絲繩和纖維繩規范.第1和2部分:復合繩.彈性拉繩 | Specification for combined wire and fibre ropes - Combined ropes - Spring lay ropes |
| BS 4154-1-1985 | 熱固性聚酯樹脂半透明玻璃纖維增強塑料波紋板.第1部分:材料和性能要求規范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements |
| BS 4154-2-1985 | 熱固性聚酯樹脂半透明玻璃纖維增強塑料波紋板.第2部分:外形和尺寸規范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for profiles and dimensions |
| BS 4371-1991 | 纖維質密封墊規范 | Specification for fibrous gland packings |
| BS 4407-1988 | 纖維混紡織物的定量分析方法 | Methods for quantitative analysis of fibre mixtures |
| BS 4549-1-1997 | 增強塑料模塑件質量控制要求槽則.第1部分:玻璃纖維增強聚酯樹脂模塑件質量控制方案制定指南 | Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings |
| BS 4817-1972 | 瓦楞纖維紙板厚度的測定方法 | Method for the determination of the thickness of corrugated fibreboard |
| BS 5116-1974 | 棉花平列纖維束斷裂強度的測定試驗方法 | Method of test for determination of breaking tenacity of flat bundles of cotton fibres |
| BS 5131-4.2-1990 | 鞋靴和鞋靴材料試驗方法.第4部分:其它部件.第2節:纖維板彎曲指數 | Methods of test for footwear and footwear materials - Other components - Flexing index of fibreboard |
| BS 5131-4.5-1990 | 鞋靴和鞋靴材料試驗方法.第4部分:其他部件.第5節:纖維紙板拉伸強度 | Methods of test for footwear and footwear materials - Other components - Tensile strength of fibreboard |
| BS 5167-1978 | 洗衣粉和清潔劑包裝.纖維板盒及筒尺寸和容積 | Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard |
| BS 5182-1975 | 采用纖維圖形儀測定精紡裝置加工的羊毛纖維長度的方法 | Method for the measurement of the length of wool fibres processed on the worsted system, using a fibre diagram machine |
| BS 525-1991 | 鋼絲繩用纖維芯規范 | Specification for fibre cores for wire ropes |
| BS 5626-1-1979 | 電工用纖維素紙.第1部分:定義和一般要求 | Cellulosic papers for electrical purposes - Definitions and general requirements |
| BS 5626-3.1-1981 | 電工用纖維素紙.第3部分:各型材料規范.第1節:通用材料 | Cellulosic papers for electrical purposes - Specifications for individual materials - General purpose paper |
| BS 5626-3.2-1985 | 電工用纖維素紙.第3部分:各型材料規范.第2節:電容器紙 | Cellulosic papers for electrical purposes - Specification for individual materials - Capacitor paper |
| BS 5626-3.3-1982 | 電工用纖維素紙.第3部分:各型材料規范.第3節:皺紋紙 | Cellulosic papers for electrical purposes - Specification for individual materials - Crepe paper |
| BS 5626-3.4-1980 | 電工用纖維素紙.第3部分:各型材料規范.第4節:電解電容器紙 | Cellulosic papers for electrical purposes - Specifications for individual materials - Electrolytic capacitor paper |
| BS 5626-3.5-1995 | 電工用纖維素紙.第3部分:各型材料規范.第5節:專用紙 | Cellulosic papers for electrical purposes - Specification for individual materials - Special papers |
| BS 5689-3.2-1995 | 電工用浸漆織物.第3部分:各型材料規范.第2節:用環氧樹脂、聚氨基甲酸乙酯、有機硅樹脂、聚酯、瀝青或油性樹 | Varnished fabrics for electrical purposes - Specifications for individual materials - Glass fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous or oleoresinous varnish |
| BS 5699-1-1979 | 檔案記錄用已沖洗攝影膠片.第1部分:纖維素酯基底上的銀明膠型規范 | Processed photographic film for archival records - Specifications for silver-gelatin type on cellulose ester base |
| BS 5734-5-1990 | 電工和其它用途用聚酯模塑料.第5部分:機械用玻璃纖維增強熱固性塑料片材規范 | Polyester moulding compounds for electrical and other purposes - Specification for sheet moulding compounds for mechanical purposes |
| BS 5766-23-2001 | 動物飼料分析方法.粗纖維含量的測定.中間過濾法 | Methods for analysis of animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration |
| BS 5803-2-1985 | 坡屋頂空間隔熱.第2部分:噴丸或噴粒人造礦物纖維隔熱層規范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing |
| BS 5803-3-1985 | 坡屋頂空間隔熱.第3部分:噴吹纖維素纖維隔熱規范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for cellulose fibre thermal insulation for application by blowing |
| BS 5803-5-1985 | 坡屋頂空間隔熱.第5部分:人造礦物纖維和纖維素纖維隔熱層規范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for installation of man-made mineral fibre and cellulose fibre insulation |
| BS 5866-3-1991 | 公共部門用毯子.第3部分:多孔合成纖維毯規范 | Blankets suitable for use in the public sector - Specification for synthetic fibre cellular blankets |
| BS 5881-1980 | 單層實心纖維板重量測定方法 | Method for determination of grammage of single layers of solid fibreboard |
| BS 6049-9-1999 | 茶葉的試驗方法.粗纖維含量的測定 | Methods of test for tea - Determination of crude fibre content |
| BS 6069-4.2-1991 | 空氣質量的表征方法.第4部分:固定廢物排放源.第2節:石棉廠排放廢物中纖維支數含量測定方法 | Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement |
| BS 6091-3.1-1995 | 電工用硫化纖維制品.第3部分:各型材料規范.第1節:扁片材 | Vulcanized fibre for electrical purposes - Specifications for individual materials - Flat sheets |
| BS 6189-1989 | 有關織物、纖維、紗線及工藝的術語詞匯 | Glossary of terms relating to fabrics and associated fibres, yarns and processes |
| BS 6215-1-1981 | 農業食品試驗方法.第1部分:粗纖維含量測定(通用方法) | Methods of test for agricultural food products - Determination of crude fibre content (general method) |
| BS 6215-2-1981 | 農業食品試驗方法.第2部分:粗纖維含量測定(改進的沙勒法) | Methods of test for agricultural food products - Determination of crude fibre content (modified Scharrer method) |
| BS 6306-2-1982 | 稀釋液纖維素粘度限值測定方法.第2部分:酒石酸鈉鐵(Ⅲ)絡合物溶液法 | Methods for determination of limiting viscosity number of cellulose in dilute solutions - Iron (III) sodium tartrate complex (EWNNmod NaCl) method |
| BS 6451-1984 | 地面運輸用網和纖維繩索負荷限制系統規范 | Specification for netting and fibre rope load restraint systems in surface transport |
| BS 6466-1984 | 陶瓷纖維爐襯的設計和安裝實用規程 | Code of practice for design and installation of ceramic fibre furnace linings |
| BS 6564-3-1990 | 聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E類玻璃纖維規范 | Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene |
| BS 6756-1986 | 纖維繩索貨運網規范 | Specification for fibre rope cargo nets |
| BS 6782-11-1999 | 涂料用膠粘劑.工業用硝化纖維素溶液粘度的測定及此類溶液的分類 | Binders for paints - Determination of the viscosity of industrial cellulose nitrate solutions and their classification |
| BS 6F 37-1990 | 航空航天用570g/m*m和 640g/m*m棉粗帆布纖維規范 | Specification for 570 g/m2 and 640 g/m2 cotton canvas fabrics for aerospace purposes |
| BS 7034-3-1988 | 玻璃粘度和測定粘度固定點.第3部分:采用纖維拉伸粘度計對粘度的測定方法 | Viscosity and viscometric fixed points of glass - Method for the determination of viscosity by fibre elongation viscometer |
| BS 7159-1989 | 特殊工廠或工地用玻璃纖維增強塑料管道系統的設計和建造實用規程 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 7200-1989 | 合成纖維刺繡毛氈規范 | Specification for synthetic-fibre needlefelts |
| BS 7225-3.1-1990 | 耐火材料分類.第3部分:陶瓷纖維制品.第1節:覆蓋層、底板、氈墊和紙 | Classification of refractories - Ceramic fibre products - Blankets , mats, felts and paper |
| BS 7463-1-1991 | 紙、紙板和紙漿纖維配料分析.第1部分:一般方法 | Fibre furnish analysis of paper, board and pulps - General method |
| BS 7463-2-1991 | 紙、紙板和紙漿的纖維配料分析.第2部分:染色指南 | Fibre furnish analysis of paper, board and pulps - Guide to staining |
| BS 7463-3-1991 | 紙、紙板和紙漿的纖維配料分析.第3部分:采用赫芝伯格染色試驗法 | Fibre furnish analysis of paper, board and pulps - Method of test by Herzberg stain |
| BS 7463-4-1991 | 紙、紙板和紙漿纖維配料分析.第4部分:用格拉弗'C'染色試驗法 | Fibre furnish analysis of paper, board and pulps - Method of test by Graff 'C' stain |
| BS 7463-5-1991 | 紙、紙板和紙漿的纖維配料分析.第5部分:采用勞夫頓-麥瑞特染色(韋斯巴修訂法)試驗法 | Fibre furnish analysis of paper, board and pulps - Method of test by Lofton-Merritt stain (Wisbar modification) |
| BS 7463-6-1995 | 紙、紙板和紙漿纖維配料分析.纖維粗度的測定 | Fibre furnish analysis of paper, board and pulps - Determination of fibre coarseness |
| BS 7463-7-1995 | 紙、紙板和紙漿纖維配料分析.重量因數的測定 | Fibre furnish analysis of paper, board and pulps - Determination of weight factors |
| BS 7531-2006 | 工業和航空目的橡膠纖維墊片.規范 | Rubber bonded fibre jointing for industrial and aerospace purposes - Specification |
| BS 7658-2-1993 | 碳纖維.第2部分:線性密度的測定方法 | Carbon fibre - Method for determination of linear density |
| BS 7833-1995 | 有玻璃纖維柄套的消防釜規范 | Specification for firefighters' axes with glass fibre shafts |
| BS 8010-2.5-1989 | 管道的實用規程.第2部分:陸地管道:設計、制造和安裝.第5節:玻璃纖維加強的熱固性塑料制品 | Code of practice for pipelines - Pipelines on land: design, construction and installation - Glass reinforced thermosetting plastics |
| BS 8219-2001 | 薄板屋面和墻面涂敷層.成形纖維水泥.實施規程 | Installation of sheet roof and wall coverings - Profiled fibre cement - Code of practice |
| BS DD CEN/TS 14578-2003 | 給水或排水和下水道用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GPR).安裝的推薦實施 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| BS DD CEN/TS 14632-2006 | 排水、排污和供水、壓力和非壓力用塑料管道系統.基于聚酯樹脂(UP)玻璃纖維增強熱固性塑料(GPR).合格評定指 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Guidance for the assessment of conformity |
| BS DD CEN/TS 15658-2007 | 高級工業陶瓷.無反應環境高溫條件下陶瓷纖維的機械特性.用熱端法測定儒變性能 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
| BS DD ENV 1094-7-1994 | 隔熱產品.陶瓷纖維產品的試驗方法 | Insulating refractory products - Methods of test for ceramic fibre products |
| BS DD ENV 1170-8-1997 | 預澆鑄混凝土制品.玻璃纖維加強水泥試驗方法.循環氣候性試驗 | Precast concrete products - Test method for glass-fibre reinforced cement - Cyclic weathering type test |
| BS DD IEC/PAS 61280-2-10-2003 | 纖維光學通信子系統試驗程序.數字系統.激光發射機的時間分辨線性調頻脈沖和α因數測量 | Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| BS DD ISO/PAS 11856-2003 | 鋪地織物.纖維粘合劑測定的試驗方法 | Textile floor coverings - Test methods for the determination of fibre bind |
| BS EN 1007-1-2002 | 高技術陶瓷.陶瓷復合材料.纖維增強的試驗方法.膠粘劑含量的測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content |
| BS EN 1007-2-2002 | 高技術陶瓷.陶瓷復合材料.纖維增強的試驗方法.線性密度的測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density |
| BS EN 1007-3-2003 | 高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.長纖維直徑和橫截面積的測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of filament diameter and cross-section area |
| BS EN 1007-4-2005 | 高級工業陶瓷.陶瓷復合材料.纖維增強的試驗方法.環境溫度下長纖維的抗拉性能測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature |
| BS EN 1007-5-2003 | 高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.室溫下復絲束中長絲斷開時的拉伸強度和拉伸應變分布的測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature |
| BS EN 1013-2-1999 | 單層屋面用透光成型塑料薄板.玻璃纖維增強的聚酯樹脂薄板的試驗方法和特殊要求 | Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
| BS EN 1094-1-1997 | 隔熱耐火產品.陶瓷纖維產品術語 | Insulating refractory products - Terminology for ceramic fibre products |
| BS EN 1094-3-2003 | 絕緣耐火產品.陶瓷纖維絕緣制品的分類 | Insulating refractory products - Classification of insulating products made from ceramic fibres |
| BS EN 1169-1999 | 預制混凝土制品.玻璃纖維增強水泥的工廠生產控制的一般規則 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
| BS EN 1170-1-1998 | 預制混凝土制品.玻璃纖維增強水泥的試驗方法.基質堅實度的測量."坍塌"試驗方法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the consistency of the matrix - 'Slump test' method |
| BS EN 1170-2-1998 | 預制混凝土制品.玻璃纖維增強水泥試驗方法.新鮮GRC纖維含量的測量.沖刷試驗 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content in fresh GRC, 'Wash out test' |
| BS EN 1170-3-1998 | 預制混凝土制品.玻璃纖維增強水泥的測試方法.噴射的GRC纖維含量測定 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content of sprayed GRC |
| BS EN 1170-4-1998 | 預制混凝土制品.玻璃纖維增強水泥的測試方法.測定抗彎強度.簡易彎曲試驗法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method |
| BS EN 1170-5-1998 | 預制混凝土制品.玻璃纖維增強水泥的測試方法.測定抗彎強度.完全彎曲試驗法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method |
| BS EN 1170-6-1998 | 預制混凝土制產品.玻璃纖維增強水泥的測試方法.浸漬時水吸收性的測定和干密度的測定 | Precast concrete products - Test method for glass-fibre reinforced cement - Determination of the absorption of water by immersion and determination of the dry density |
| BS EN 1170-7-1998 | 預制混凝土制品.玻璃纖維增強水泥的測試方法.由于濕度引起尺寸變化極限的測定 | Precast concrete products - Test method for glass-fibre reinforced cement - Measurement of extremes of dimensional variations due to moisture content |
| BS EN 12132-1-1999 | 羽毛和羽絨.纖維羽絨特性的試驗方法.摩擦試驗 | Feather and down - Methods of testing the down-proof properties of fabrics - Rubbing test |
| BS EN 12132-2-1999 | 羽毛和羽絨.纖維羽絨特性的試驗方法.沖擊試驗 | Feather and down - Methods of testing the down-proof properties of fabrics - Impact test |
| BS EN 12195-2-2001 | 道路車輛的負載限動組件.安全性.人造纖維網繩 | Load restraint assemblies on road vehicles - Safety - Web lashing made from man-made fibres |
| BS EN 12256-1998 | 塑料管道系統.熱塑配件.纖維配件機械強度和柔韌性試驗方法 | Plastic piping systems - Thermoplastic fittings - Test method for mechanical strength or flexibility of fabricated fittings |
| BS EN 1228-1997 | 塑料管道系統.玻璃纖維的增強熱固塑料(GFK).特定初始環狀剛性測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| BS EN 12467-2004 | 纖維水泥平板材.產品規范和試驗方法 | Fibre-cement flat sheets - Product specification and test methods |
| BS EN 12575-1998 | 塑料.熱固模塑復合物.SMC中纖維浸濕度測定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC |
| BS EN 12576-1998 | 塑料.纖維增強復合物.SMC、BMC和DMC的壓縮模制試驗板的預先制備 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC |
| BS EN 12590-2000 | 紡織品.完全或部分用合成纖維制的工業縫紉線 | Textiles - Industrial sewing threads made wholly or partly form synthetic fibres |
| BS EN 1261-1995 | 一般用途的纖維繩索.大麻繩 | Fibre ropes for general service - Hemp |
| BS EN 12751-1999 | 紡織品.試驗用纖維、紗和織物的取樣 | Textiles - Sampling of fibres, yarns and fabrics for testing |
| BS EN 12763-2000 | 建筑物排放系統用纖維混凝土管和配件.交貨的尺寸和技術條款 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| BS EN 13002-2-1999 | 碳纖維長絲紗.試驗方法和通用規范 | Carbon fibre yarns - Test methods and general specifications |
| BS EN 13003-1-1999 | 帕蠟-芳族聚酰胺纖維長絲紗.標示 | Para-aramid fibre filament yarns - Designation |
| BS EN 13003-2-1999 | 帕蠟-芳族聚酰胺纖維長絲紗.試驗方法和通用規范 | Para-aramid fibre filament yarns - Methods of test and general specifications |
| BS EN 13003-3-1999 | 帕蠟-芳族聚酰胺纖維長絲紗.技術規范 | Para-aramid fibre filament yarns - Technical specifications |
| BS EN 13171-2001 | 建筑物的熱絕緣產品.工廠制的木纖維產品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| BS EN 13280-2001 | 地上儲存冷水用整體式結構和組合結構的玻璃纖維增強的蓄水池規范 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| BS EN 13392-2001 | 紡織材料.單纖維絲.線密度測定 | Textiles - Monofilaments - Determination of linear density |
| BS EN 13413-2002 | 彈性地板覆蓋物.填充纖維基布上的聚氯乙烯地板覆蓋物.規范 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification |
| BS EN 13421-2006 | 塑料.熱模化合物.復合和增強纖維.壓模化合物的向異性能測定用試樣制備 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| BS EN 13496-2002 | 建筑設施用隔熱制品.玻璃纖維網狀物的機械性能的測定 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes |
| BS EN 13815-2006 | 纖維石膏模型.定義.要求和試驗方法 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| BS EN 1394-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.外表初始圓周抗拉強度的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| BS EN 14053-2004 | 包裝.瓦楞或?qū)嵭睦w維紙板制成的包裝件.類型和結構 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
| BS EN 14118-1-2003 | 加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊)規范.名稱 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Designation |
| BS EN 14118-2-2003 | 加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊)規范.試驗方法和一般要求 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Methods of test and general requirements |
| BS EN 14118-3-2003 | 加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊).特殊要求 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Specific requirements |
| BS EN 14278-1-2005 | 紡織材料.棉纖維粘著性的測定.使用手工熱檢測設備的方法 | Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device |
| BS EN 14278-2-2004 | 紡織品.棉纖維粘性的測定.使用自動測溫板式裝置的方法 | Textiles - Determination of cotton fibre stickiness - Method using an automatic thermodetection plate device |
| BS EN 14278-3-2004 | 紡織品.棉纖維粘性的測定.使用自動測溫旋轉筒式裝置的方法 | Textiles - Determination of cotton fibres stickiness - Method using an automatic thermodetection rotating drum device |
| BS EN 14362-2-2003 | 紡織物.從偶氮染料中分離出的某些芳族胺的測定方法.通過萃取纖維獲得某些偶氮染料的使用的檢測 | Textiles - Methods for the determination of certain aromatic amines deriv ed from azo colorants - Detection of the use of certain azo colorants accessible by extracting t he fibres |
| BS EN 14364-2006 | 地下壓力排水和排污水塑料管道系統.未飽和聚酯樹脂(UP)玻璃纖維增強的熱固性塑料(GRP).管道、配件和連接件 | Plastic piping systems for drainage and sewerage with or without pressure - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 1444-2001 | 纖維水泥管道.管道敷設和現場施工指南 | Fibre-cement pipelines - Guide for laying and on-site work practices |
| BS EN 14447-2005 | 纖維增強塑料.玻璃墊增強熱塑性塑料(GMT).測定流動性和固化性 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
| BS EN 14488-3-2006 | 測試噴射的混凝土.纖維鋼筋梁樣品的撓曲強度(首峰、終峰和殘余量) | Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| BS EN 14488-5-2006 | 測試噴射混凝土.纖維增強混凝土板樣本的能量吸收能力的測定 | Testing sprayed concrete - Determination of energy absorption capacity of fibre reinforced slab specimens |
| BS EN 14488-7-2006 | 測試噴射混凝土纖維增強混凝土的纖維含量 | Testing sprayed concrete - Fibre content of fibre reinforced concrete |
| BS EN 14525-2005 | 不同材料管道用球墨鑄鐵大公差聯接器和法蘭接頭:球墨鑄鐵、灰鑄鐵、鋼、PVC-U、PE和纖維水泥 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 14649-2005 | 預澆鑄混凝土產品.水泥和混凝土中玻璃纖維殘留強力的試驗方法(SIC試驗) | Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC test) |
| BS EN 14650-2005 | 預澆鑄混凝土產品.金屬纖維混凝土工廠生產控制的一般規則 | Precast concrete products - General rules for factory production control of metallic fibered concrete |
| BS EN 14651-2005 | 金屬纖維混凝土試驗方法.測量柔性抗拉強度(殘余比例極限(LOP)) | Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
| BS EN 14684-2004 | 聚酯纖維繩索.雙股編織結構 | Polyester fibre ropes - Double braid construction |
| BS EN 14685-2004 | 聚酰胺纖維繩索.雙股編織結構 | Polyamide fibre ropes - Double braid construction |
| BS EN 14686-2004 | 聚酯/聚烯烴雙股纖維繩索 | Fibre ropes of polyester/polyolefin dual fibres |
| BS EN 14687-2004 | 混合聚烯烴纖維繩索 | Mixed polyolefin fibre ropes |
| BS EN 14721-2005 | 金屬纖維混凝土的試驗方法.新澆混凝土和硬化混凝土中纖維含量的測量 | Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
| BS EN 14768-2005 | 纖維板桶.公稱容量為5l到600l帶滑動蓋的可移動頂端(敞口)桶 | Fibreboard drums — Removable head (open head) drums with slip on lids with a nominal capacity of 5l to 600l |
| BS EN 14845-1-2007 | 混凝土纖維試驗方法.參比混凝土 | Test methods for fibres in concrete - Reference concretes |
| BS EN 14845-2-2006 | 混凝土纖維的試驗方法.混凝效果 | Test methods for fibres in concrete - Effect on concrete |
| BS EN 14889-1-2006 | 混凝土纖維.鋼纖維.定義、規范和合格性 | Fibres for concrete - Steel fibres - Definitions, specifications and conformity |
| BS EN 14889-2-2006 | 混凝土纖維.纖維聚合物.定義、規范和合格性 | Fibres for concrete - Polymer fibres - Definitions, specifications and conformity |
| BS EN 1492-1-2000 | 紡織吊索.安全性.一般用途的人造纖維的單層機織織帶吊索 | Textile slings - Safety - Flat woven webbing slings, made of man-made fibres, for general purpose use |
| BS EN 1492-2-2000 | 紡織吊索.安全性.一般用途的人造纖維的圓吊索 | Textile slings - Safety - Roundslings, made of man-made fibres, for general purpose use |
| BS EN 1492-4-2004 | 纖維吊索.安全.天然和人造纖維制通用提升吊索 | Textile slings - Safety - Lifting slings for general service made from natural and man-made fibre ropes |
| BS EN 15319-2007 | 纖維(石膏)抹灰層設計的一般原則 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 1787-2000 | 食物.ESR光譜法檢測經過輻射的含纖維素食品 | Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy |
| BS EN 181000-1995 | 電子元器件用質量評定協調系統.通用規范.纖維光學分流裝置 | Harmonized system of quality assessment for electronic components - Generic specification - Fibre optic branching devices |
| BS EN 1891-1998 | 防高處墜落個人保護設備.低彈力纖維繩索 | Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
| BS EN 23035-1994 | 單面和單壁瓦楞纖維紙板耐壓力的測定定 | Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance |
| BS EN 2329-1993 | 紡織玻璃纖維預浸漬.測定單位面積質量的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of mass per unit area |
| BS EN 2330-1993 | 紡織玻璃纖維預浸漬. 測定揮發物含量的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter |
| BS EN 2331-1993 | 紡織玻璃纖維預浸漬.測定單位面積樹脂、纖維含量和纖維質量的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area |
| BS EN 2332-1993 | 紡織玻璃纖維預浸漬.測定樹脂流動的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin flow |
| BS EN 2374-1991 | 玻璃纖維加強的模壓件和夾層復合材料.試驗板的生產 | Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels |
| BS EN 2377-1989 | 玻璃纖維增強的塑料規范.試驗方法.表面層間剪切強度測定 | Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength |
| BS EN 2378-1995 | 纖維增強的塑料.用浸泡法測定塑料吸水性 | Fibre reinforced plastics - Determination of water absorption by immersion |
| BS EN 2489-1995 | 纖維增強塑料.試驗液體效應的測定 | Fibre reinforced plastics - Determination of the action of test fluids |
| BS EN 2557-1997 | 碳素纖維預浸織物.單位面積質量測定 | Carbon fibre preimpregnates - Determination of mass per unit area |
| BS EN 2558-1997 | 碳纖維預浸漬材料.揮發物含量測定 | Carbon fibre preimpregnates - Determination of the volatile content |
| BS EN 2559-1997 | 碳素纖維預浸織物.樹脂成份,纖維成份以及單位面積纖維質量測定 | Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| BS EN 2560-1998 | 炭纖維預浸漬物.樹脂流量的測定 | Carbon fibre preimpregnates - Determination of the resin flow |
| BS EN 2561-1995 | 碳素纖維增強的塑料.無向的塑料層壓制品.平行與纖維方向的抗拉試驗 | Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction |
| BS EN 2562-1997 | 碳素纖維增強塑料.單向?qū)訅核芰?與纖維方向平行的彎曲試驗 | Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| BS EN 2563-1997 | 碳纖維增強塑料.單向?qū)訅喊?層間表面剪切強度的測定 | Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| BS EN 2564-1998 | 碳纖維層壓板材.纖維、樹脂含量和空隙率的測定 | Carbon fibre laminates - Determination of the fibre, resin and void contents |
| BS EN 2597-1998 | 碳纖維層壓板材.單向?qū)訅喊宀?垂直于纖維方向的拉伸試驗 | Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction |
| BS EN 2743-2002 | 航空航天系列.纖維增強的塑料.未老化材料測試前狀態調節的標準程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| BS EN 2746-1998 | 玻璃纖維增強塑料.彎曲試驗.三點彎曲法 | Glass fibre reinforced plastics - Flexural test - Three point bend method |
| BS EN 2747-1998 | 玻璃纖維增強塑料.拉伸試驗 | Glass fibre reinforced plastics - Tensile test |
| BS EN 300-2006 | 定向纖維束板(OSB).定義、分類和規范 | Oriented strand boards (OSB) - Definitions, classification and specifications |
| BS EN 302-3-2004 | 承重木結構用膠粘劑.試驗方法.通過溫度和濕度循環試驗測定木纖維酸性腐蝕對橫向拉伸強度的影響 | Adhesives for load-bearing timber structures - Test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 316-1999 | 木纖維板.定義、分類和符號 | Wood fibreboards - Definition, classification and symbols |
| BS EN 317-1993 | 碎料板和纖維板.在水中浸泡后膨脹厚度的測定 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| BS EN 319-1993 | 碎料板和纖維板.與板平面垂直的拉伸強度的測定 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| BS EN 320-1993 | 纖維板.抗螺釘軸向拔出力的測定 | Fibreboards - Determination of resistance to axial withdrawal of screws |
| BS EN 3665-1997 | 清漆和涂料檢驗方法.鋁合金耐纖維狀腐蝕檢驗 | Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| BS EN 3733-008-2006 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光連接器.EN4532(200mu/280mu纖維)的電纜用插頭組 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3733-009-2006 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光連接器.EN4532(200mu/280mu纖維)的電纜用插孔組 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3745-202-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.纖維尺寸 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| BS EN 382-1-1993 | 纖維板.表面吸濕性測定.纖維板.干燥處理纖維板試驗方法 | Fibreboards - Determination of surface absorption - Fireboards - Determination of surface absorption - Test method for dry process fibreboards |
| BS EN 382-2-1994 | 纖維板.表面吸濕性的測定.防火板.硬質板的試驗方法 | Fibreboards - Determination of surface absorption - Fireboards - Determination of surface absorption - Test methods for hardboards |
| BS EN 40-7-2003 | 燈柱.纖維增強聚酯復合燈柱的要求 | Lighting columns - Requirements for fibre reinforced polymer composite lighting columns |
| BS EN 4533-001-2006 | 航空航天系列.纖維光學系統.手冊.終端法和工具 | Aerospace series - Fibre optic systems - Handbook - Termination methods and tools |
| BS EN 4533-002-2006 | 航空航天系列.纖維光學系統.手冊.試驗和測量 | Aerospace series - Fibre optic systems - Handbook - Test and measurement |
| BS EN 4533-003-2006 | 航空航天系列.纖維光學系統.手冊.航行燈和設備的使用 | Aerospace series - Fibre optic systems - Handbook - Looming and installation practices |
| BS EN 4533-004-2006 | 航空航天系列.纖維光學系統.手冊.修理、維護和檢測 | Aerospace series - Fibre optic systems - Handbook - Repair, maintenance and inspection |
| BS EN 492-2004 | 纖維水泥條板及配件.產品規范和試驗方法 | Fibre cement slates and fittings - Product specification and test methods |
| BS EN 494-2004 | 纖維水泥型板及配件.產品規范和試驗方法 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| BS EN 50223-2001 | 可燃短纖維材料的自動靜電應用設備 | Automatic electrostatic application equipment for flammable flock material |
| BS EN 50337-8-3-2007 | 纖維光學通信系統使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50類B1.1和B1.3單模纖維上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category C |
| BS EN 50353-2001 | 絕緣油.用顯微鏡計數法測定纖維污染物 | Insulating oil - Determination of fibre contamination by the counting method using a microscope |
| BS EN 50377-10-2-2005 | 光纖通信系統中使用的連接器裝置和互連組件.產品規范.第10-2部分:端接在IEC 60793-2 B1類光纖上的MU/APC型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU/APC singlemode terminated on IEC 60793-2 category B1 fibre |
| BS EN 50377-2-1-2001 | 光纖通信系統使用的接頭組件和互連元件.產品規范.接線端設在IEC 60793-2類B1單模纖維上的FC-PC型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre |
| BS EN 50377-3-1-2001 | 光纖通信系統中使用接頭組件和互連元件.產品規范.接線端設在IEC 60793-2類A1a和A1b多模纖維上的SG型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type SG terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-5-1-2003 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2類B.1.1單模纖維上的EC型連接器組和互 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre |
| BS EN 50377-6-2-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50類B1.1和B1.3單模纖維上的SC-RJ單 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| BS EN 50377-7-1-2004 | 光纖通信系統中使用的連接器裝置和互連組件.產品規范.端接在IEC 60793-2 A1a和A1b類多模纖維上的LC-PC雙工 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-7-2-2004 | 光纖通信系統中使用的連接器裝置和互連組件.產品規范.端接在IEC 60793-2 B1.1類單模纖維上的LC-PC雙工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-7-3-2004 | 光纖通信系統中使用的連接器裝置和互連組件.產品規范.端接在IEC 60793-2 B1.1類單模纖維上的LC-APC雙工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-7-4-2004 | 光纖通信系統中使用的連接器裝置和互連組件.產品規范.端接在IEC 60793-2 B1.1類單模纖維上的LC-PC單工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-2-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50類B1.1和B1.3單模纖維上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| BS EN 50377-8-4-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50類B1.1和B1.3單模纖維上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U |
| BS EN 50377-8-5-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50類B1.1和B1.3單模纖維上的LSH-PC單 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U |
| BS EN 50377-8-6-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50 B1.1和B1.3類單模纖維上的LSH-HR | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category C |
| BS EN 50377-8-7-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50 B1.1和B1.3類單模纖維上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category C |
| BS EN 50377-8-8-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50 B1.1和B1.3類單模纖維上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category U |
| BS EN 50377-8-9-2007 | 光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2-50 B1.1和B1.3類單模纖維上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category U |
| BS EN 50378-3-1-2007 | 光纖通信系統用無源元件.產品規范.端接在IEC60793-2-50類B1.1和B1.3單模纖維上的類型100/200GHz DWDM模數 | Passive components to be used in optical fibre communication systems - Product specifications - Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre |
| BS EN 50378-3-2-2007 | 光纖通信系統用無源元件.產品規范.端接在IEC60793-2-50類B1.1和B1.3單模纖維上的類型4/8信道CWDM模數 | Passive components to be used in optical fibre communication systems - Product specifications - Type 4/8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre |
| BS EN 50411-2-2-2007 | 用于光纖傳遞系統的纖維形成體和閉路.產品規范.S&A類密封平蓋纖維接縫閉路類型1 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed pan fibre splice closures Type 1, for category S & A |
| BS EN 50411-2-4-2006 | 用于光纖通信系統的纖維形成體和閉路.產品規范.S&A類1型密封圓蓋纖維接縫閉路 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed dome fibre splice closures type 1, for category S & A |
| BS EN 50414-2006 | 聚氯乙烯絕緣和護套光電纖維電纜鉛分析的試驗方法.方法A:用火焰激發原子吸收光譜測定法測定法含鉛總量測定. | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
| BS EN 512-1995 | 纖維水泥制品.壓力管道和接頭 | Fibre-cement products - Pressure pipes and joints |
| BS EN 588-1-1997 | 下水管和排水道用纖維水泥管.第1部分:重力管路系統用管道、管連接件和管配件 | Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems |
| BS EN 588-2-2002 | 下水管和排水道用纖維水泥管.人孔和檢驗井 | Fibre-cement pipes for sewers and drains - Manholes and inspection chambers |
| BS EN 60249-2-1992 | 規范.第19號規范:多層印制電路板構件規定的可燃性雙馬來酰亞胺/三嗪改型氧化物玻璃纖維編織包銅疊層板材 | Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| BS EN 60317-0-4-1998 | 特種繞組線規范.一般要求.樹脂或清漆浸漬玻璃纖維繞制、裸或漆包矩形銅線 | Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-5-2007 | 繞組線的特殊類型用規范.一般要求.玻璃纖維編制樹脂或浸漬清漆的裸露或涂瓷釉的矩形銅線 | Specifications for particular types of winding wires - General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-31-1993 | 特種繞線規范.溫度指數為180的玻璃纖維繞制聚酯或聚酰胺酯清漆處理過的裸線或漆包矩形銅線 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish resin impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
| BS EN 60317-32-1993 | 特種繞線規范.溫度指數為155的玻璃纖維繞制聚酯或聚酰胺酯清漆處理過的裸線或漆包矩形銅線 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 |
| BS EN 60317-33-1993 | 特種繞線規范.溫度指數為200的玻璃纖維繞制的經硅氧烷清漆處理的裸線或漆包矩形銅線 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 |
| BS EN 60317-39-1993 | 特殊型繞組線規范.玻璃纖維編織聚酯或聚酰胺酯處理,裸或漆包方銅線,溫度系數180 | Specifications for particular types of winding wire - Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
| BS EN 60317-40-1993 | 特殊型繞組線規范.玻璃纖維編織硅清漆處理,裸或漆包方銅線,溫度系數200 | Specifications for particular types of winding wires - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 |
| BS EN 60317-48-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為155 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 |
| BS EN 60317-49-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為180 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
| BS EN 60317-50-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為200 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 |
| BS EN 60371-3-6-1996 | 云母基絕緣材料規范.第3部分:單項材料規范.第6節:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60450-2004 | 新舊纖維素電絕緣材料聚合的平均粘度測量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| BS EN 60454-3-10-1996 | 電工用壓敏膠帶規范.單項材料規范.帶有橡膠熱固性膠的乙酸丁酸纖維素薄膜膠帶 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
| BS EN 60454-3-11-2007 | 電工用壓敏粘帶.單項材料規范.涂有玻璃長絲、纖維素皺紋紙、聚酯非織布、環氧樹脂和壓敏粘合劑的聚酯薄膜化 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| BS EN 60454-3-4-2007 | 電工用壓敏粘帶.單項材料規范.帶橡膠熱固性粘合劑的纖維素皺紋紙和非皺紋紙 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| BS EN 60454-3-8-2006 | 電工用壓敏粘帶.單項材料規范.涂有玻璃纖維、乙酸纖維素或與粘膠纖維組合的帶壓敏粘膠的編織纖維帶 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| BS EN 60554-2-2002 | 電工用纖維素紙.試驗方法 | Cellulosic papers for electrical purposes - Methods of test |
| BS EN 60684-3-300-2002 | 絕緣軟套管.各種型號軟套管規范要求.無涂層的玻璃纖維編織軟套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving, braided, uncoated |
| BS EN 60684-3-400 to 402-2002 | 絕緣軟套管規范.各種型號軟套管規范要求.涂有硅橡膠的玻璃纖維編織套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with silicone elastomer coating |
| BS EN 60684-3-406 to 408-2003 | 絕緣軟套管規范.各種型號軟套管的規范要求.PVC涂覆層的玻璃纖維編織套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with PVC coating |
| BS EN 60684-3-409-1999 | 絕緣軟套管規范.各種型號套管的規范要求.帶聚氨酯(PUR)覆層的玻璃纖維編織套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with polyurethane (PUR)-based coating - Glass textile sleeving with polyurethane (PUR)-base coating |
| BS EN 60793-1-20-2002 | 光纖.測量方法和試驗規程.纖維幾何結構 | Optical fibres - Measurement methods and test procedures - Fibre geometry - Section 20: Fibre geometry measurement methods |
| BS EN 60793-1-30-2002 | 光纖.測量方法和試驗規程.纖維驗證試驗 | Optical fibres - Measurement methods and test procedures - Fibre proof test |
| BS EN 60793-1-34-2006 | 光學纖維.測量方法和試驗規程.纖維卷曲 | Optical fibres - Measurement methods and test procedures - Fibre curl |
| BS EN 60793-1-41-2004 | 光學纖維.測量方法和試驗規程.頻帶寬度 | Optical fibres - Measurement methods and test procedures - Bandwidth |
| BS EN 60793-1-43-2002 | 光學纖維.測量方法和試驗規程.數字孔徑 | Optical fibres - Measurement methods and test procedures - Numerical aperture |
| BS EN 60793-1-46-2002 | 光學纖維.測量方法和試驗規程.光透射率變化的監測 | Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance |
| BS EN 60793-1-49-2006 | 光學纖維.測量方法和試驗規程.差分模式時延 | Optical fibres - Measurement methods and test procedures - Differential mode delay |
| BS EN 60793-1-50-2002 | 光學纖維.測量方法和試驗規程.濕熱(穩態) | Optical fibres - Measurement methods and test procedures - Damp heat (steady state) |
| BS EN 60793-1-51-2002 | 光學纖維.測量方法和試驗規程.干熱 | Optical fibres - Measurement methods and test procedures - Dry heat |
| BS EN 60793-1-52-2002 | 光學纖維.測量方法和試驗規程.溫度變化 | Optical fibres - Measurement methods and test procedures - Change of temperature |
| BS EN 60793-1-53-2002 | 光學纖維.測量方法和試驗程序.浸水 | Optical fibres - Measurement methods and test procedures - Water immersion |
| BS EN 60793-1-54-2003 | 光學纖維.測量方法和試驗規程.γ輻射 | Optical fibres - Measurement methods and test procedures - Gamma irradiation |
| BS EN 60793-2-20-2002 | 光學纖維.產品規范.A2類多模光纖的分規范 | Optical fibres - Product specifications - Sectional specification for category A2 multimode fibres |
| BS EN 60793-2-40-2006 | 光學纖維.產品規范.A4類多模光纖的分規范 | Optical fibres - Product specifications - Sectional specification for category A4 multimode fibres |
| BS EN 60793-2-50-2004 | 光纖.產品規范.B級單模纖維的分規范 | Optical fibres - Products specification - Sectional specification for class B single-mode fibres |
| BS EN 60794-1-2-2003 | 光學纖維電纜.總規范.基礎光纜試驗規程 | Optical fibre cables - Generic specification - Basic optical cable test procedures |
| BS EN 60794-2-21-2006 | 光纜.室內光纜.房屋布線用多纖維光學配電電纜的詳細規范 | Optical fibre cables - Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling |
| BS EN 60819-1-1996 | 電氣用非纖維素紙.定義和一般要求 | Non-cellulosic papers for electrical purposes - Definitions and general requirements |
| BS EN 60819-2-2002 | 電工用非纖維素紙.試驗方法 | Non-cellulosic papers for electrical purposes - Methods of test |
| BS EN 60819-3-1-2001 | 電工用非纖維素紙.專用材料規范.填充玻璃紙 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Filled glass paper |
| BS EN 60819-3-2-2002 | 電工用非纖維素紙.各種材料規范.混合無機-有機紙 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Hybrid inorganic-organic paper - Hybrid inorganic-organic paper |
| BS EN 60819-3-3-2006 | 電工用非纖維素紙.單項材料規范.非填充芳族聚酰胺紙 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Unfilled aramid (aromatic polyamide) papers |
| BS EN 60819-3-4-2002 | 電工用非纖維素紙.各種材料規范.含不超過50%的云母顆粒的芳族聚酰胺纖維紙 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Aramid fibre paper containing not more than 50 % of mica particles - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles |
| BS EN 60874-17-1997 | 光纖和電纜的連接器.纖維光學連接器的部分規范.F-05型(磨擦鎖定) | Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| BS EN 61067-1-1997 | 玻璃和玻璃聚酯纖維機織帶.第1部分:定義、分類和一般要求 | Glass and glass polyester fibre woven tapes - Definitions, classification and general requirements |
| BS EN 61067-2-1997 | 玻璃和玻璃聚酯纖維機織帶.第2部分:試驗方法 | Glass and glass polyester fibre woven tapes - Methods of test |
| BS EN 61067-3-1-1995 | 玻璃和玻璃聚酯纖維機織帶.第3部分:各型材料規范.第1節:1,2,3型織帶 | Glass and glass polyester fibre woven tapes - Specifications for individual materials - Type 1, 2 and 3 tapes |
| BS EN 61068-1-1997 | 聚酯纖維機織帶.第1部分:定義、牌號和一般要求 | Polyester fibre woven tapes - Definitions, designation and general requirements |
| BS EN 61068-2-1997 | 聚酯纖維機織帶.第2部分:試驗方法 | Polyester fibre woven tapes - Methods of test |
| BS EN 61068-3-1-1996 | 聚酯纖維機織帶.第3部分:各型材料規范.第1節:常規或無梭織機編織帶 | Polyester fibre woven tapes - Specification for individual materials - Tapes woven on conventional or shuttleless looms |
| BS EN 61197-1996 | 絕緣油.火焰線性傳播.玻璃纖維試驗法 | Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape |
| BS EN 61249-2-1-2005 | 印制板和其它互連結構用材料.包被和非包被增強基材.酚醛纖維素紙增強銅包被經濟級疊層板 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| BS EN 61249-2-10-2003 | 印刷板和互連結構用材料.包被和非包被增強基材.規定了易燃性的包銅改良或未改良的氰酸酯溴化環氧編織E型玻 | Materials for printed boards and other interconnecting structures - Reinforced base materials clad and unclad - Cyanate ester , brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-11-2004 | 印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-18-2002 | 互聯結構用材料.包被和非包被的增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被聚酯非編織玻璃纖維增強的層壓 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad - Section 18: Polyester non-woven fiberglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-19-2002 | 互連結構用材料.包層和非包層的增強的基材分規范.規定了易燃性的環氧斜交簾布層的線性纖維玻璃增強的包銅的 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
| BS EN 61249-2-2-2005 | 印制板和其它互連結構用材料.第2-2部分:包覆和非包覆增強基材.覆銅高電級酚醛纖維素紙增強的疊層板 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| BS EN 61249-2-21-2004 | 印制板和其他互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧編織E | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-22-2005 | 印制板和其他互連結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的改良的非鹵化環氧編織E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-23-2005 | 印制板和其他互連結構用材料.包被和非包被增強基材.銅包被的經濟級非鹵化酚醛纖維素紙增強層壓板 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets , economic grade, copper-clad |
| BS EN 61249-2-26-2005 | 印制板和其他互連結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧非編織/編織E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-4-2002 | 互連結構用材料.包層和非包層增強的基材分規范.規定了易燃性的聚酯非編織/編織玻璃纖維銅包的層壓板(垂直燃 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-5-2004 | 印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙增強芯/ | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-6-2004 | 印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-8-2003 | 互連結構用材料.包被和非包被增強基材分規范.包被和非包被增強基材.規定了易燃性的包銅改良溴化環氧編織玻 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-9-2003 | 互連結構用材料.包被和非包被增強基材分規范.包被和非包被增強基材.規定了易燃性的包銅二順丁烯二酰亞胺/三 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-4-11-2005 | 印制板和其他互連結構用材料.第4-11部分:非包被預浸料的分規范集.阻燃型非鹵化環氧編織E型玻璃纖維預浸料 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-12-2005 | 印制板和其他互連結構用材料.第4-12部分:非包被預浸料的分規范集.阻燃型非鹵化多功能環氧編織E型玻璃纖維預 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-2-2005 | 印制板和其他互連結構用材料.第4-2部分:非包被預浸料的分規范集.阻燃型多功能環氧編織E型玻璃纖維預浸料 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional expoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-5-2005 | 印制板和其他互連結構用材料.第4-5部分:非包被預浸料的分規范集.阻燃型改良或未改良聚酰亞胺編織E型玻璃纖 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability |
| BS EN 61274-1-1-2006 | 纖維光學連接器用適配器.第1-1部分:空白詳細規范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification |
| BS EN 61280-1-4-2003 | 光纖通信子系統基本試驗程序.一般通信子系統的試驗程序.多模纖維激光發射機用二維近場數據的采集和整理 | Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters |
| BS EN 61280-2-1-1999 | 纖維光學通信子系統基本試驗程序.數字系統試驗程序.接收器靈敏度和過載測量 | Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Receiver sensitivity and overload measurement - Test procedures for digital systems - Receiver sensitivity and overload measurement |
| BS EN 61280-2-10-2005 | 纖維光學通信子系統試驗規程.數字系統.激光發射器的時間分辨線性調頻脈沖和α指數測量 | Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| BS EN 61280-4-1-2004 | 纖維光學通信子系統試驗程序.光纜設施和鏈路.多模光纜設施衰減測量 | Fibre-optic communication subsystem test procedures - Cable plant and links - Multimode fibre optic cable plant attenuation measurement |
| BS EN 61290-10-1-2003 | 光學纖維放大器.試驗方法.多道參數.使用光學開關和光譜分析儀的脈沖法 | Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| BS EN 61290-10-2-2003 | 光學纖維放大器.試驗方法.多道參數.選通光頻譜分析儀脈沖法 | Optical amplifiers - Test methods - Multichannel parameters - Pulse method using a gated optical spectrum analyzer |
| BS EN 61290-10-3-2003 | 光學纖維放大器.試驗方法.多道參數.探測法 | Optical amplifiers - Test methods - Multichannel parameters - Probe methods |
| BS EN 61290-3-1-2004 | 光學纖維放大器.基礎規范.噪音數字參數的測試方法.光譜分析儀法 | Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Optical spectrum analyzer method |
| BS EN 61291-4-2003 | 光學纖維放大器.多信道應用.性能規范模板 | Optical fibre amplifiers - Multichannel applications - Performance specification template |
| BS EN 61300-1-2003 | 纖維光學互連器件和無源元件.基本試驗和測量程序.總則和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - General and guidance |
| BS EN 61300-2-12-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-12部分:試驗.沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| BS EN 61300-2-14-2006 | 纖維光學互聯裝置和無源元件.基本試驗和測量程序.試驗.光學功率控制和損壞閾特性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Optical power handling and damage threshold characterization |
| BS EN 61300-2-16-2006 | 纖維光學互連器件和無源元件.基本試驗和測量規程.第2-16部分:試驗.霉菌生長 | Fibre optic interconnecting devices and passive components - Basictest and measurement procedures - Part 2-16: Tests - Mould growth |
| BS EN 61300-2-18-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-18部分:試驗.干熱.高溫耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| BS EN 61300-2-19-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-19部分:試驗.濕熱(穩態) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| BS EN 61300-2-22-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.試驗.溫度變化 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Change of temperature |
| BS EN 61300-2-24-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.用施加應力進行陶瓷準直套管篩選 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of ceramic alignment split sleeve by stress application - Section 24 Screen testing of ceramic alignment split sleeve by stress application |
| BS EN 61300-2-26-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.試驗.鹽霧 | Fibre optic interconnecting devices and passive Components - Basic test and measurement procedures - Tests - Salt mist |
| BS EN 61300-2-33-2007 | 纖維光學互聯裝置和無源部件.基本試驗和測量程序.試驗.光纜接頭盒組裝和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of fibre optic closures |
| BS EN 61300-2-37-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.纖維光學外殼的光纜彎曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for fibre optic closures |
| BS EN 61300-2-38-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-38部分:試驗.加壓纖維光學器件外殼的密封 | Fibre optic interconnecting devices and passive components — Basictest and measurement procedures — Part 2-38: Tests — Sealing forpressurized fibre optic closures |
| BS EN 61300-2-4-1997 | 光纖互聯裝置和無源部件.基本試驗和測量程序.試驗.纖維/電纜牢固性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention |
| BS EN 61300-2-40-2001 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.單模調整式有角度光纖光纜連接器衰減的篩選 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned angled optical connectors - Section 40: Test method for screen testing of attenuation of single mode tuned angled optical fibre connectors |
| BS EN 61300-2-42-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-42部分:試驗.連接器靜態側向負荷 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors |
| BS EN 61300-2-43-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.單模PC光纖連接器回波損耗的篩選 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of return loss of single mode PC optical fibre connectors - Section 43: Screen testing of return loss of single mode PC optical fibre connectors |
| BS EN 61300-2-44-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.纖維光學器件應力消除的撓曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Flexing of the strain relief of fibre optic devices |
| BS EN 61300-2-46-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.試驗.濕熱循環 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Damp heat cyclic |
| BS EN 61300-2-47-2007 | 纖維光學互聯裝置和無源部件.基本試驗和測量程序.試驗.熱沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Thermal shocks |
| BS EN 61300-2-49-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.試驗.連接器安裝試驗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Connector installation test |
| BS EN 61300-2-50-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.試驗.帶靜載荷的纖維光學連接器檢驗試驗.單模和多模 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
| BS EN 61300-2-51-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.試驗.帶外加拉伸負載的傳輸用纖維光學連接器試驗.單模和多 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode |
| BS EN 61300-3-1-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-1部分:檢驗和測量.目視檢驗 | Fire optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| BS EN 61300-3-10-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.檢驗和測量.量規保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Gauge retention force |
| BS EN 61300-3-14-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.可變衰減器衰減設置的準確性和重復性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| BS EN 61300-3-15-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.凸形拋光金屬環端面的圓頂偏心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| BS EN 61300-3-17-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.套管角度拋光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle-polished ferrules - Examinations and measurements - Endface angle of angle-polished ferrules |
| BS EN 61300-3-18-2006 | 纖維光學互聯裝置和無源元件.基本試驗和測量程序.傾角端面連接器的鍵控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of an angled endface connector |
| BS EN 61300-3-23-1998 | 光纖互連裝置和無源部件.基本試驗和測量程序.檢查和測量.纖維與金屬箍末端的相對位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examination and measurements - Fibre position relative to ferrule endface |
| BS EN 61300-3-24-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.偏振保持光纖用光學連接器的鍵控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| BS EN 61300-3-27-1997 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.多路連接器插頭的孔位測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement method for the hole location of a multiway connector plug - Section 27: Measurement method for the hole location of a multiway connector plug |
| BS EN 61300-3-29-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢驗和測量.表征密集波分復用(DWDM)元件的光譜傳輸功能振 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components |
| BS EN 61300-3-32-2006 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.檢查和測量.無源光學元件的偏振模式色散測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization mode dispersion measurement for passive optical components |
| BS EN 61300-3-33-1999 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢查和測量.套管分離力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Ferrule withdrawal force - Ferrule withdrawal force |
| BS EN 61300-3-37-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.檢驗和測量.角拋光光纖的端面角 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle- polished optical fibres |
| BS EN 61300-3-40-1998 | 光纖互聯裝置和無源部件.基本試驗和測量程序.檢驗和測量.極化維持(PM)纖維軟導線連接器消光比 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector |
| BS EN 61314-1-1-2006 | 纖維光學扇形輸出器.空白詳細規范 | Fibre optic fan-outs - Blank detail specification |
| BS EN 61314-1-2005 | 纖維光學風扇.第1部分:總規范 | Fibre optic fan-outs - Part 1: Generic specification |
| BS EN 61753-022-2-2003 | 光纖互連器件和無源元件性能標準.C類端接在多模纖維上的光纖連接器.受控環境 | Fibre optic interconnecting devices and passive components performance standard - Fibre optic connectors terminated on multimode fibre for category C. Controlled environment |
| BS EN 61753-051-3-2002 | 纖維光學互連器件和無源部件性能標準.U類單模光纖插接式固定衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Single-mode fibre, plug-style fixed attenuators for category U. Uncontrolled environment |
| BS EN 61753-052-3-2002 | 纖維光學互連裝置和無源元件性能標準.U類單模光纖帶引線固定的衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Single-mode fibre, pigtailed-style fixed attenuators for category U. Uncontrolled environment |
| BS EN 61753-053-3-2004 | 纖維光學互連器件和無源元件性能標準.U類連續可變衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Continuously variable attenuators for category U. Uncontrolled environment |
| BS EN 61753-091-3-2004 | 纖維光學互連器件和無源元件性能標準.U類單模纖維光學有抽頭的循環器.非受控環境 | Fibre optic interconnecting devices and passive components performance standards - Performance standard - Single-mode fibre optic pigtailed style circulators for category U. Uncontrolled environment |
| BS EN 61753-101-2-2006 | 纖維光學互連器件和無源元件性能標準.第101-2部分:受控環境的C類光纖管理系統 | Fibre optic interconnecting devices and passive components performance standard — Part 101-2: Fibre management systemsfor category C — Controlled environment |
| BS EN 61754-10-2005 | 纖維光學連接器接口.第10部分:微型MPO連接器系列 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| BS EN 61754-13-2006 | 纖維光學連接器接口.FC-PC型連接器 | Fibre optic connector interfaces - Type FC-PC connector |
| BS EN 61754-18-2002 | 纖維光學連接器接口.MT-RJ型連接器族 | Fibre optic connector interfaces - Type MT-RJ connector family |
| BS EN 61754-21-2005 | 纖維光學連接器接口.塑料光纖的SMI型連接器門類 | Fibre optic connector interfaces - Type SMI connector family for plastic optical fibre |
| BS EN 61754-22-2005 | 纖維光學連接器接口.F-SMA型連接器族 | Fibre optic connector interfaces - Type F-SMA connector family |
| BS EN 61754-23-2005 | 纖維光學連接器接口.LX.5型連接器門類 | Fibre optic connector interfaces - Type LX.5 connector family |
| BS EN 61754-5-2005 | 纖維光學連接器接口.第5部分:MT型連接器系列 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| BS EN 61754-7-2005 | 纖維光學連接器接口.MPO型連接器門類 | Fibre optic connector interfaces - Type MPO connector family |
| BS EN 61755-1-2006 | 纖維光學連接器的光學接口.單一模式非色散移位纖維的光學接口.總則和指南 | Fibre optic connector optical interfaces - Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
| BS EN 61755-2-1-2006 | 纖維光學連接器的光學接口.光學接口標準單模非物理角接觸光纖 | Fibre optic connector optical interfaces - Optical interface standard single mode non-angled physically contacting fibres |
| BS EN 61755-2-2-2006 | 纖維光學連接器光學接口.第2-2部分:標準物理角連接單模光纖的光學接口 | Fibre optic connector optical interfaces — Part 2-2: Optical interface standard single mode angled physically contacting fibres |
| BS EN 61755-3-5-2006 | 纖維光學連接器的光學接口.第3-5部分:光學接口.使用銅-鎳合金作為單模纖維光纖接口材料用的直徑2.5mm和1.25 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single modefibre |
| BS EN 61755-3-6-2006 | 纖維光學連接器的光學接口.第3-6部分:光接口.用銅-鎳合金作為纖維環繞材料的單模光纖直徑2.5mm和1.25mm圓柱 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degreesangled-PC composite ferrule using Cu-Ni-alloy as fibre surroundingmaterial, single mode fibre |
| BS EN 61756-1-2006 | 纖維光學互連裝置和無源元件.纖維管理系統的接口標準.總則和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - General and guidance |
| BS EN 61977-2002 | 纖維光學過濾器.總規范 | Fibre optic filters - Generic specification |
| BS EN 62005-7-2004 | 纖維光學互連裝置和無源光學元件的可靠性.壽命應力模型 | Reliability of fibre optic interconnecting devices and passive optical components - Life stress modeling |
| BS EN 62148-1-2002 | 纖維光學的有源元器件和裝置.封裝和接口標準.總則和規范 | Fibre optic active components and devices - Package and interface standards - General and guidance |
| BS EN 62148-11-2004 | 纖維光學有源元件及器件.包裝和接口標準.14針調制器集成激光二極管發射機 | Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters |
| BS EN 62148-12-2004 | 纖維光學有源元件和器件.包裝和接口標準.帶同軸RF連接器的激光發射機 | Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector |
| BS EN 62148-4-2004 | 纖維光學有源元件和器件.包裝和接口標準.PN 1x9塑料光纖無線電收發信機 | Fibre optic active components and devices - Package and interface standards - PN 1x9 plastic optical fibre transceivers |
| BS EN 62148-6-2003 | 纖維光學有源元件及器件.包裝和接口標準.ATM-PON無線電收發信機 | Fibre optic active components and devices - Package and interface standards - ATM-PON transceivers |
| BS EN 62149-1-2004 | 纖維光學有源元件及器件.性能標準.通則和指南 | Fibre optic active components and devices - Performance standards - General and guidance |
| BS EN 62149-3-2004 | 纖維光學有源元件和器件.性能標準.2.5Gbit/s調制器-集成激光二極管發射機 | Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters |
| BS EN 62149-5-2004 | 纖維光學有源元件和器件.性能標準.帶LD驅動及CDR IC的ATM-PON無線電收發信機 | Fibre optic active components and devices - Performance standards - ATM-PON transceivers with LD driver and CDR ICs |
| BS EN 62149-6-2004 | 纖維光學有源元件和器件.性能標準.650nm、250Mbit/s塑料光纖無線電收發信機 | Fibre optic active components and devices - Performance standards - 650-nm 250-Mbit/s plastic optical fibre transceivers |
| BS EN 62150-1-2005 | 纖維光學有源元件和器件.試驗和測量規程.總則和指南 | Fibre optic active components and devices - Test and measurement procedures - General and guidance |
| BS EN 62150-2-2005 | 纖維光學有源元件和器件.試驗和測量規程.ATM-PON無線電收發信機 | Fibre optic active components and devices - Test and measurement procedures - ATM-PON transceivers |
| BS EN 622-1-2003 | 纖維板.規范.一般要求 | Fibreboards - Specifications - General requirements |
| BS EN 622-2-2004 | 纖維板.規范.硬質纖維板的要求 | Fibreboards - Specifications - Requirements for hardboards |
| BS EN 622-3-2004 | 纖維板.規范.中等板材的要求 | Fibreboards - Specifications - Requirements for medium boards |
| BS EN 622-4-1997 | 纖維板.規范.軟質纖維板的要求 | Fibreboards - Specifications - Requirements for softboards |
| BS EN 622-5-2006 | 纖維板.規范.干燥處理板(MDF)的要求 | Fibreboards - Specifications - Requirements for dry process boards (MDF) |
| BS EN 637-1995 | 塑料管道系統.玻璃纖維增強塑料部件.用重量法測定組分量 | Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method |
| BS EN 761-1995 | 塑料管道系統.玻璃纖維增強熱固性塑料管.干燥條件下蠕變系數的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| BS EN 766-1994 | 食品運輸用口袋.黃麻纖維編織口袋 | Sacks for the transport of food aid - Sacks made of jute fabric |
| BS EN 872-2005 | 水質.懸浮固體的測定.用玻璃纖維過濾器過濾的方法 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| BS EN 978-1997 | 玻璃纖維增強塑料地下水箱.ALPHA因子和β因子的測定 | Underground tanks of glass-reinforced plastics (GRP) - Determination of factor and factor |
| BS EN ISO 10306-1995 | 紡織品.棉纖維成熟度的氣流評定法 | Textiles - Cotton fibres - Evaluation of maturity by the air flow method |
| BS EN ISO 10350-2-2001 | 塑料.可比單點數據的采集和表示法.第2部分:長纖維增強塑料 | Plastics - Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastic |
| BS EN ISO 10352-1997 | 纖維增強塑料.模塑化合物和預浸料坯.單位面積質量的測定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area |
| BS EN ISO 10548-2003 | 碳纖維.膠料含量的測定 | Carbon fibre - Determination of size content |
| BS EN ISO 1061-1999 | 塑料.未增塑的醋酸纖維素.游離酸度的測定 | Plastics - Unplasticized cellulose acetate - Determination of free acidity |
| BS EN ISO 10618-2004 | 碳纖維.樹脂浸漬紗拉伸性能的測定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| BS EN ISO 1140-2004 | 纖維繩索.聚酰胺.3、4和8股絞繩 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| BS EN ISO 1141-2004 | 纖維繩索.聚酯.3、4和8股絞繩 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| BS EN ISO 11667-2000 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強的纖維和礦物填料含量的測定.溶解方法 | Fibre reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution methods |
| BS EN ISO 1172-1999 | 紡織玻璃纖維增強塑料.聚酯膠片,模制混合物和疊層材料.紡織玻璃纖維和礦物添充物含量的測定.煅燒法 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods |
| BS EN ISO 11721-1-2001 | 紡織品.纖維素紡織品抗菌性的測定.土埋試驗.防腐處理的評定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Assessment of rot-retardant finishing |
| BS EN ISO 11721-2-2003 | 紡織品.纖維素紡織品抗菌性的測定.土埋試驗.防腐處理長期有效性的鑒定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Identification of long-term resistance of a rot retardant finish |
| BS EN ISO 1181-2004 | 纖維繩索.馬尼拉麻和劍麻.3、4和8股絞繩 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| BS EN ISO 12114-1997 | 纖維增強塑料.熱固性模塑化合物和聚酯膠片.固化特性的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics |
| BS EN ISO 12115-1997 | 纖維增強塑料.熱固性模塑化合物和聚酯膠片.流動性、熟化期和儲存期限的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life |
| BS EN ISO 12215-1-2000 | 小艇.船體結構和船材尺寸.材料：玻璃纖維增強熱固性樹脂標準層壓板材 | Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate |
| BS EN ISO 12947-1-1999 | 紡織品.用馬丁代爾（Martindale)法對織物抗磨損性的測定.馬丁代爾耐磨試驗儀00000000000000000000000物.Mar | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus |
| BS EN ISO 13002-1999 | 碳纖維.長絲紗命名體系 | Carbon fibre - Designation system for filament yarns |
| BS EN ISO 1346-2004 | 纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3).3、4和8股繩索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity (PP3) - 3-, 4- & 8- strand ropes |
| BS EN ISO 13938-1-1999 | 紡織品.纖維脹破特性.脹破強度和脹破膨脹測定的液壓方法 | Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension |
| BS EN ISO 13938-2-1999 | 紡織品.纖維破碎特性.對破碎強度和破碎膨脹力的氣動測定方法 | Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension |
| BS EN ISO 14125-1998 | 纖維增強塑料復合材料.撓性性能的測定 | Fibre-reinforced plastic composites - Determination of flexural properties |
| BS EN ISO 14126-1999 | 纖維增強塑料復合材料.平面方向壓縮性的測定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
| BS EN ISO 14129-1998 | 纖維增強塑料復合材料.用<+或->45°張力試驗法測定平面剪切應力/剪切應變反應，包括平面剪切量和剪切強度 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method |
| BS EN ISO 14130-1998 | 纖維增強塑料復合材料.用短試片測定表觀層間粘合剪切強度 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method |
| BS EN ISO 14692-1-2003 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.詞匯、符號、應用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials |
| BS EN ISO 14692-2-2003 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.合格評定和生產 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture |
| BS EN ISO 14692-3-2003 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.系統設計 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design |
| BS EN ISO 14692-4-2003 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.制造、安裝和運行 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation |
| BS EN ISO 15630-2-2002 | 混凝土的鋼筋和預應力用鋼.試驗方法.焊接纖維 | Steel for the reinforcement and prestressing of concrete - Test methods - Welded fabric |
| BS EN ISO 1598-2000 | 塑料.乙酸纖維素.不可溶顆粒的測定 | Plastics - Cellulose acetate - Determination of insoluble particles |
| BS EN ISO 1599-1999 | 塑料.醋酸纖維素.模塑時粘度降低的測定 | Plastics - Cellulose acetate - Determination of viscosity loss on moulding |
| BS EN ISO 1600-1999 | 塑料.乙酸纖維素.利用熱的不同周期測定模制樣品中的光吸收量 | Plastics - Cellulose acetate - Determination of light absorption of moulded specimens produced using different periods of heating |
| BS EN ISO 16000-7-2007 | 室內空氣.空氣中石棉纖維濃度測定用取樣策略 | Indoor air - Sampling strategy for determination of airborne asbestos fibre concentrations |
| BS EN ISO 16472-2006 | 動物飼料.精制淀粉酶中性清潔劑纖維(aNDF)含量的測定 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) |
| BS EN ISO 1968-2004 | 纖維繩索和繩索制品.詞匯 | Fibre ropes and cordage - Vocabulary |
| BS EN ISO 1969-2004 | 纖維繩索.聚乙烯.3和4股繩索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| BS EN ISO 2307-2005 | 纖維繩索.特定物理和機械性能的測定 | Fibre ropes - Determination of certain physical and mechanical properties |
| BS EN ISO 2398-1996 | 壓縮空氣用紡織纖維增強橡膠軟管規范 | Rubber hose, textile-reinforced, for compressed air - Specification |
| BS EN ISO 5079-1996 | 紡織纖維.單纖維斷裂時斷裂力和伸長率的測定 | Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres |
| BS EN ISO 527-4-1997 | 塑料.抗拉性能測定.第4部分:正交同性和正交異性纖維試驗條件.增強塑料復合材料 | Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| BS EN ISO 527-5-1997 | 塑料.抗拉性能測定.第5部分:單向纖維試驗條件.增強塑料復合材料 | Plastics - Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites |
| BS EN ISO 585-1999 | 塑料.非增塑的乙酸纖維素.水分含量的測定 | Plastics - Unplasticized cellulose acetate - Determination of moisture content |
| BS EN ISO 6888-2-1999 | 食品和動物飼料的微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他屬種)計數的水平方法.兔血漿纖維蛋白原 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using rabbit plasma fibrinogen agar medium |
| BS EN ISO 75-2-2004 | 塑料.載荷下?lián)锨鷾囟鹊臏y定.塑料、硬橡膠和長纖維增強合成物 | Plastics - Determination of temperature of deflection under load - Plastics and ebonite |
| BS EN ISO 7822-1999 | 紡織玻璃纖維增強的塑料.空隙量的測定.灼燒損失、機械粉碎和統計計數法 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods |
| BS EN ISO 9163-2005 | 紡織玻璃纖維.粗紗.試樣的制備和浸漬粗紗拉伸強度的測定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN ISO 9237-1995 | 紡織品.纖維織物透氣性的測定 | Textiles - Determination of the permeability of fabrics to air |
| BS EN ISO 9554-2005 | 纖維繩索.一般規范 | Fibre ropes - General specifications |
| BS F 125-1973 | 橡膠粘合壓縮石棉纖維墊片規范 | Specification for rubber bonded compressed asbestos fibre jointing |
| BS F 138-1991 | 航空航天用聚酯纖維平紋(線軸)網規范 | Specification for polyester plain (bobbin) netting suitable for aerospace purposes |
| BS F 141-1992 | 航空航天用密織棉纖維(L28和L34)規范 | Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes |
| BS IEC 60874-10-1-1999 | 光纖和光纜連接器.第10-1部分:與A1型多模纖維連接的BFOC/2.5光纖連接器詳細規范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 |
| BS IEC 60874-10-2-1999 | 光纖和光纜連接器.第10-2部分:與B1型單模纖維連接的BFOC/2.5光纖連接器詳細規范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 |
| BS IEC 60874-10-3-1998 | 光纖和光纜用連接器.單模式和多模式纖維用BFOC/2,5型纖維光學適配器詳細規范 | Connectors for optical fibres and cables - Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre |
| BS IEC 60874-14-1-1998 | 光纖和電纜連接器.連接A1a,A1b型多模式纖維的SC-PC型標準光纖連接器的詳細規范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
| BS IEC 60874-14-3-1998 | 第14部分：光纖和光纜連接器.第3節：單模式纖維用SC型光纖連接器(單一型)的詳細規格 | Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre |
| BS IEC 60874-14-4-1998 | 第14部分：光纖和光纜連接器.第4節：多模式纖維用SC型光纖連接器(單一型)的詳細規格 | Detail specification for fibre optic adaptor (simplex) type SC for multimode fibre |
| BS IEC 60874-14-5-1998 | 光纖和光纜連接器.第14-5部分:連接B1型單模式纖維的SC-PC型不調諧光纖連接器詳細規格 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1 |
| BS ISO 10119-2002 | 碳纖維.測定密度 | Carbon fibre - Determination of density |
| BS ISO 10312-1995 | 周圍環境空氣.石棉纖維的測定.直接傳遞透射電子顯微法 | Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
| BS ISO 10371-1995 | 纖維加強塑料.復合加強材料用編織帶.規范基礎 | Fibre reinforced plastics - Braided tapes for composite materials reinforcement - Basis for a specification |
| BS ISO 105-F07-2002 | 紡織品.色牢度試驗.再生醋酸纖維貼襯織物規范 | Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric |
| BS ISO 10635-2000 | 耐火制品.陶瓷纖維制品的試驗方法 | Refractory products - Methods of test for ceramic fibre products |
| BS ISO 11566-1996 | 碳纖維.單絲樣品抗拉性能的測定 | Carbon fibre - Determination of the tensile properties of single-filament specimens |
| BS ISO 11567-1996 | 碳纖維.長絲直經和橫截面積的測定 | Carbon fibre - Determination of filament diameter and cross-sectional area |
| BS ISO 11667-1997 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量測定.溶解方法 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 11861-1999 | 紡織品地板覆蓋物.椰殼粗纖維墊.類型和規范 | Textile floor coverings - Coir mats - Types and specification |
| BS ISO 1268-1-2002 | 纖維增強塑料.試驗板的制備方法.通用條件 | Fibre-reinforced plastics - Methods of producing test plates - General conditions |
| BS ISO 1268-10-2005 | 纖維增強塑料.試驗板的生產方法.BMC和其他長纖維化合物的注射模塑法.多用途試樣的一般原則和模制 | Fibre-reinforced plastics - Methods of producing test plates - Injection moulding of BMC and other long-fibre compounds - General principles and moulding of multipurpose test specimens |
| BS ISO 1268-11-2005 | 纖維增強塑料.試驗板的生產方法.BMC和其他長纖維化合物的注射模塑法.小型試驗板 | Fibre-reinforced plastics - Methods of producing test plates - Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
| BS ISO 1268-2-2001 | 纖維增強塑料.試驗板的制備方法.接觸模壓法和噴射成形法 | Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding |
| BS ISO 1268-3-2001 | 纖維增強塑料.試驗板的制備方法.濕壓縮模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding |
| BS ISO 1268-4-2006 | 纖維增強塑料.試驗用板材的生產方法.預浸料坯的摸制 | Fibre-reinforced plastics - Methods of producing test plates - Moulding of prepregs |
| BS ISO 1268-5-2001 | 纖維增強塑料.試驗板的制備方法.長纖維纏繞 | Fibre-reinforced plastics - Methods of producing test plates - Filament winding |
| BS ISO 1268-6-2002 | 纖維增強塑料.試驗用板材的生產方法.拉擠壓制件 | Fibre-reinforced plastics - Methods of producing test plates - Pultrusion moulding |
| BS ISO 1268-7-2001 | 纖維增強塑料.試驗板的生產方法.樹脂轉換模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 1268-8-2004 | 纖維增強塑料.試驗板的生產方法.SMC和BMC壓模 | Fibre-reinforced plastics - Methods of producing test plates - Compression moulding of SMC and BMC |
| BS ISO 1268-9-2003 | 纖維增強塑料.試驗板的制備方法.GMT/STC的模制 | Fibre-reinforced plastics - Methods of producing test plates - Moulding of GMT/STC |
| BS ISO 13003-2004 | 纖維增強塑料.循環載荷條件下疲勞性能的測定 | Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions |
| BS ISO 13794-1999 | 環境空氣.石棉纖維的測定.間接傳遞電子顯微鏡法 | Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| BS ISO 13820-1997 | 紙、紙板和波紋纖維板.壓縮試驗設備的描述和校準 | Paper, board and corrugated fibreboard - Description and calibration of compression testing equipment |
| BS ISO 13821-2002 | 波紋纖維板.耐沿邊緣擠壓性的測定.上蠟邊緣法 | Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method |
| BS ISO 14966-2002 | 環境空氣.無機纖維顆粒的數值濃度的測定.掃描電子顯微鏡檢查法 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| BS ISO 15024-2002 | 纖維增強塑料復合材料.無方向性增強材料的模式I層間斷裂韌性，GDOWNiDOWNc,的測定 | Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials |
| BS ISO 15100-2001 | 塑料制品.增強纖維.短切原絲.松密度的測定 | Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
| BS ISO 15570-1999 | 纖維素乙酸酯輻射劑量測定系統的實施規程 | Practice for use of cellulose acetate dosimetry system |
| BS ISO 15840-2006 | 船舶和海上技術.海上設備用熱固性樹脂纖維玻璃管和管件的標準規范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 16065-1-2001 | 紙漿.采用自動光學分析法對纖維長度的測定.極化光法 | Pulps - Determination of fibre length by automated optical analysis - Polarized light method |
| BS ISO 16065-2-2007 | 紙漿.用自動光學分析法測量纖維長度.非偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Unpolarized light method |
| BS ISO 16549-2005 | 紡織材料.纖維繩的不勻性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| BS ISO 17771-2003 | 塑料.熱固性模制化合物.SMC中纖維潤濕程度的測定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC |
| BS ISO 18692-2007 | 海上位置保持用纖維繩索.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| BS ISO 1887-1995 | 紡織玻璃纖維.可燃物質含量測定 | Textile glass - Determination of combustible-matter content |
| BS ISO 1888-1997 | 紡織玻璃纖維.人造纖維或長絲.平均直徑的測定 | Textile glass - Staple fibres or filaments - Determination of average diameter |
| BS ISO 2076-2000 | 紡織品.人造纖維.屬名 | Textiles - Man-made fibres - Generic names |
| BS ISO 2113-1996 | 增強纖維.機織織物.規范基礎 | Reinforcement fibres - Woven fabrics - Basis for a specification |
| BS ISO 22314-2006 | 塑料.玻璃纖維增強產品.纖維長度測定 | Plastics - Glass-fibre-reinforced products - Determination of fibre length |
| BS ISO 23713-2005 | 紙漿.用自動光學分析測定纖維粗度.偏振光法 | Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method |
| BS ISO 2559-2001 | 紡織玻璃纖維.墊(由短線或連續的絞捻線制).名稱和基本規范 | Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications |
| BS ISO 3341-2000 | 紡織玻璃纖維.紗線.斷裂力和斷裂伸長的測定 | Textile glass - Yarns - Determination of breaking force and breaking elongation |
| BS ISO 3342-1995 | 紡織玻璃纖維.織物.抗拉強度的測定 | Textile glass - Mats - Determination of tensile breaking force |
| BS ISO 3597-1-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.棒的一般考慮和制備 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods |
| BS ISO 3597-2-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.彎曲強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength |
| BS ISO 3597-3-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.壓縮強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength |
| BS ISO 3597-4-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.表觀層間剪切強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength |
| BS ISO 36-2006 | 硬化或熱塑橡膠.測定與柔質纖維粘合性 | Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics |
| BS ISO 3616-2001 | 紡織玻璃纖維.短切原絲和連續長絲織毯.平均厚度,加載厚度和壓縮回復厚度的測定 | Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression |
| BS ISO 4603-1996 | 紡織玻璃纖維.織物.厚度測定 | Textile glass - Woven fabrics - Determination of thickness |
| BS ISO 4606-1995 | 紡織玻璃纖維.織物.采用抓損疵法對斷裂張力和斷裂延性的測定 | Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| BS ISO 4912-2002 | 紡織品.棉纖維.成熟度估計.顯微法 | Textiles - Cotton fibres - Evaluation of maturity - Microscopic method |
| BS ISO 5350-4-2006 | 紙漿.塵埃和纖維素的估計.用等值黑色面積(EBA)法反射光的檢驗儀器 | Pulps - Estimation of dirt and shives - Instrumental inspection by reflected light using equivalent black area (EBA) method |
| BS ISO 6741-1-2002 | 紡織品.纖維和紗線.寄銷貨物商業質量的測定.質量的測定和計算 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Mass determination and calculations |
| BS ISO 6741-2-2002 | 紡織品.纖維和紗線.寄銷貨物商業質量的測定.獲取實驗室樣品的方法 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Methods for obtaining laboratory samples |
| BS ISO 6741-3-2002 | 紡織品.纖維和紗線.寄銷貨物商業質量的測定.樣品凈化程序 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures |
| BS ISO 6989-2002 | 紡織纖維.短纖維長度和長度分布的測定(用單纖維的測定) | Textiles fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| BS ISO 8605-2001 | 玻璃纖維增強塑料.片狀模塑料(SMC) .基礎規范 | Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification |
| BS PL 4-2005 | 高強度纖維增強復合物的低壓層壓用不飽和聚酯樹脂的特性.規范 | Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Specification |
| BS PL 5-2005 | 高強度纖維增強復合物的低壓層壓用不飽和聚酯樹脂.試驗方法 | Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Test methods |
| BS PL 7-2005 | 玻璃纖維增強疊層制品的低壓層壓用不飽和聚酯樹脂.試驗方法 | Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates - Test methods |
| BS PL 8-2005 | 飛行器燃料艙中用作爆炸抑制劑和擋板材料的纖維聚酰胺材料.規范 | Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Specification |
| BS PL 9-2005 | 飛行器燃料艙中用作爆炸抑制劑和擋板材料的纖維聚酰胺材料.試驗方法 | Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Test methods |
| BS QC 720104-1997 | 電子元件的質量評定協調體系.半導體裝置.光電子裝置.光纖維系統或分系統用帶/不帶引線的場效應管管腳組件額 | Harmonized system of quality assessment for electronic components - Semiconductor devices - Optoelectronic devices - Blank detail specification for pin-FET modules with/without pigtail, for fibre optic systems or subsystems |
| DD 76-2-1983 | 預制復合結構混凝土管.第2部分:采用切碎的鍍鋅鋼纖維增強混凝土預制管 | Precast concrete pipes of composite construction. Precast concrete pipes strengthened by chopped zinc-coated steel fibres |
| DD ENV 1007-3-1994 | 高技術陶瓷.陶瓷成分.增強的試驗方法.第3部分:長纖維直徑的測定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of filament diameter |
| DD ENV 1007-4-1994 | 高技術陶瓷.陶瓷復合材料.增強試驗方法.第4部分:周圍溫度下纖維拉伸性能測定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filament at ambient temperature |
| DD ENV 1007-5-1998 | 高技術陶瓷.陶瓷成分.增強的試驗方法. 環境溫度下多纖維牽引內纖維斷裂拉伸強度和拉伸應變分配的測定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature |
| DD ENV 1094-3-1998 | 絕緣耐火產品.陶瓷纖維產品分類 | Insulating refractory products. Classification of ceramic fibre products |
| DD ENV 1094-7-1994 | 絕緣耐火制品.第7部分:陶瓷纖維制品的試驗方法 | Insulating refractory products. Methods of test for ceramic fibre products |
| DD ENV 1170-8-1997 | 預制混凝土產品.玻璃纖維增強水泥的試驗方法.耐循環氣候環境試驗 | Precast concrete products. Test method for glass-fibre reinforced cement. Cyclic weathering type test |
| PD IEC TS 61941-2000 | 光學纖維.單模式光纖的偏振模式色散測量技術 | Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres |
| PD IEC TS 62033-2000 | 光學纖維中衰變的均勻性 | Attenuation uniformity in optical fibres |
| 編號 | 中文名稱 | 英文名稱 |