| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A06-392-2-2003 | 黑色金屬的化學分析.鋼鐵中的氧含量測定.第2部分:在惰性氣體中融化后的紅外法 | (Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.) |
| NF A09-490-1988 | 無損檢驗.密封檢驗.氣體密封規范和檢驗用推薦方法 | (NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.) |
| NF A09-492-2001 | 無損檢驗.滲漏試驗.痕量氣體方法 | (Non-destructive testing - Leak testing - Tracer gas method.) |
| NF A35-056-1984 | 鋼鐵產品.氣體保護電弧焊和潛弧焊的焊條用合金鋼和非合金鋼線材.等級和型號 | (Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
| NF A36-211-1997 | 焊接氣體氣缸用薄鋼板和條帶 | (Steel sheet and strip for welded gas cylinders.) |
| NF A51-120-1996 | 銅和銅合金.無縫的.應用于環境衛生和加熱的水和氣體的圓形銅管( 歐洲標準EN1057) | (Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.) |
| NF A51-127-2001 | 銅和銅合金.醫用氣體或真空用的無縫圓銅管 | (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A72-120-1973 | 鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A81-010-1994 | 焊條.氣體保護電弧焊和切割用氣體 | (Welding consumables. Shielding gases for arc welding and cutting.) |
| NF A81-011-1991 | 編號.用于惰性氣體弧焊的鎢電報和等離子切割 | (Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding. Codification.) |
| NF A81-311-1994 | 碳鋼、碳錳鋼和微合金鋼的氣體金屬電弧焊絲狀電極和電積物的分類 | (Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-325-1997 | 焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A81-350-1997 | 焊條.非合金鋼及細粒鋼的有和無氣體保護的金屬電弧焊接用管狀焊絲.分類(歐洲標準EN 758) | (Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.) |
| NF A81-352-2000 | 焊條.高強度鋼的氣體保護電弧焊用管狀有心電焊條.分類 | (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification.) |
| NF A84-090-1992 | 氣焊和相關工藝用設備的氣體密封 | (GAS TIGHTNESS OF EQUIPMENT FOR GAS WELDING AND ALLIED PROCESS. (EUROPEAN STANDARD EN 29090).) |
| NF A87-011-1994 | 帶有電焊條的金屬電弧熔焊、氣體保護金屬弧焊及氣焊.鋼接頭的制備 | (Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.) |
| NF A87-013-3-2001 | 焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A88-200-1-2002 | 焊接和相關過程中的健康和安全.電弧焊接產生的煙塵和氣體取樣的實驗室方法.第1部分:排放率測定和顆粒煙塵的 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic) |
| NF A88-200-2-2003 | 焊接和相關工藝中的衛生和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第2部分:除臭氧外氣體的排放率測 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.) |
| NF A88-200-3-2003 | 焊接和相關工藝中的衛生和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第3部分:用固定點測量法測定臭氧 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement) |
| NF A88-202-1-2001 | 焊接和有關工藝中的健康和安全.工作人員呼吸區空氣粒子和氣體的取樣.第1部分:氣體粒子的取樣 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.) |
| NF A88-202-2-2000 | 焊接和有關工藝中的健康和安全.工作人員工作區空氣粒子和氣體的取樣.第2部分:氣體取樣 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases.) |
| NF A89-701-3-2003 | CO2激光切割、焊接機的驗收試驗.第3部分:氣體流量和壓力測量儀的校準 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.) |
| NF B42-003-1994 | 高技術陶瓷.陶瓷粉末的試驗方法.第3部分:非氧化物氧含量的氣體熱萃取法測定 | (ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 3 : DETERMINATION OF THE OXYGEN CONTENT OF NON-OXYDES BY THERMAL EXTRACTION WITH A CARRIER GAS. (EUROPEAN STANDARD EN 725-3).) |
| NF B51-272-2-1995 | 木質人造板.甲醛釋放量的測定.氣體分析法測量甲醛釋放量 | (WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2 : FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 717-2).) |
| NF B54-173-1995 | 膠合板.氣體分析法測定粘度的方法 | (PLYWOOD. FORLAMDEHYDE RELEASE CLASSES DETERMINED BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 1084).) |
| NF C01-212-1990 | 電工詞匯.第212章:絕緣固體、液體和氣體 | (Electrotechnical vocabulary. Chapter 212 : insulating solids, liquids and gases.) |
| NF C20-760-1996 | 環境試驗.第2部分:試驗.試驗Ke:流動混合氣體的腐蝕試驗 | (Environmental testing. Part 2 : tests. Test Ke : flowing mixed gas corrosion test.) |
| NF C23-521-2000 | 潛在爆炸性氣體環境用電器.“n“型防護裝置 | (Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.) |
| NF C23-544-2000 | 家用易燃?xì)怏w監測用電器設備.選擇、安裝、使用和維修指南 | (Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.) |
| NF C23-554-1992 | 可燃性氣體的檢測和測量電器儀表.一般要求和試驗方法 | (Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.) |
| NF C23-554/A1-1998 | 探測用電器和測量可燃?xì)怏w.一般要求和檢驗方法.NF EN 50 054-1992的修改件1 | () |
| NF C23-555-1992 | 可燃性氣體的檢測和測量電氣儀表.測量空氣中沼氣含量不超過5%的I組電氣儀表的性能要求 | (Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.) |
| NF C23-556-1992 | 可燃性氣體檢測和測量電氣儀表.測量空氣中沼氣含量為100%及其以下的I組電氣儀表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.) |
| NF C23-557-1992 | 可燃性氣體的檢測和測量電氣儀表.測量低于爆炸極限100%以下的Ⅱ組電氣儀表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.) |
| NF C23-558-1992 | 可燃性氣體檢測和測量電氣儀表.測量瓦斯為100%及其以下的Ⅱ組電氣儀表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.) |
| NF C23-570-2000 | 電磁兼容性.可燃?xì)怏w、有毒氣體或氧氣的檢測和測量用電氣設備 | (Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.) |
| NF C23-571-2002 | 檢測和測量可燃?xì)怏w、有毒氣體和氧氣的電氣設備.使用軟件和/或數字技術的設備的要求和試驗 | (Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.) |
| NF C23-579-10-2003 | 爆炸性氣體環境用電氣設備.第10部分:危險場所的分類 | (Electrical apparatus for explosive gas atmospheres - Part 10 : classification of hazardous areas.) |
| NF C23-579-14-1999 | 爆炸氣體環境用電氣設備.第14部分:危險區(礦井除外)的電氣設備 | (Electrical apparatus for explosive gas atmospheres. Part 14 : electrical installations in hazardous areas (other than mines).) |
| NF C23-579-17-2003 | 爆炸性氣體環境用電氣設備.第17部分:危險場所(礦井除外)電氣設備的檢驗和維護 | (Electrical apparatus for explosive gas atmospheres - Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).) |
| NF C23-594-2000 | 家用易燃?xì)怏w監測用電氣設備.試驗方法和性能要求 | (Electrical apparatus for the detection of combustibe gases in domestic premises - Test methods and performance requirements.) |
| NF C27-224-1992 | 浸油電設備氣體和油的抽樣指南和游離及溶解氣體的分析指南 | (Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases.) |
| NF C27-230-1986 | 電工技術用流體.在電壓和電離作用下，液化絕緣氣體 | (Fluids for electrotechnical applications. Gassing of insulating liquids under electrical stress and ionization.) |
| NF C27-239-1999 | 使用中的浸礦物油的電氣設備.溶解和游離氣體分析說明指南 | (Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis.) |
| NF C27-240-1993 | 浸漬絕緣材料.關于電氣設備制造試驗的溶解氣體的分析應用(歐洲標準 EN 61 181) | (Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.) |
| NF C32-074-1993 | 電纜材料燃燒過程中的氣體試驗.通過測定PH及導電性測定氣體的腐蝕程度 | (TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.) |
| NF C32-074-21-2000 | 失火情況下電纜的一般試驗方法.電纜材料燃燒時產生的氣體的試驗.第2-1部分:程序.氫鹵酸氣體量的確定 | (Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 2-1 : procedures - Determination of the amount of halogen acid gas.) |
| NF C32-102-13/A1-2000 | 額定電壓達到和包括450/750V的橡膠絕緣電纜.第13部分:用交叉鏈接聚合物屏蔽和絕緣的及有低煙霧和腐蝕性氣體 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smok) |
| NF C32-102-9-1999 | 額定電壓不大于450/750V的橡膠絕緣電纜.第9部分:煙和腐蝕性氣體低發散率的固定布線用單芯非鎧裝電纜 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9 : SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES.) |
| NF C32-500/A1-2003 | 無載額定輸出電壓大于1kV不超過10kV的信號和氣體放電管裝置用電纜 | (Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.) |
| NF C42-726-1997 | 測量、控制和實驗室用電氣設備的安全要求.第2-043部分:使用熱空氣或熱惰性氣體的實驗室處理和醫療材料處理 | (Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-043 : particular requirements for dry heat sterilizers using either hot air or inert gas for the treatment of medical materials, and for laboratory processes) |
| NF C46-251-1994 | 氣體分析儀性能表示.第1部分:通則 | (Expression of performance of gas analyzers. Part 1 : general.) |
| NF C46-252-1994 | 氣體分析器性能表示.第2部分:氧氣(高溫電化學感應器)(EN 61 207-2) | (Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).) |
| NF C46-253-2002 | 氣體分析儀性能表示.第3部分:順磁氧分析儀 | (Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.) |
| NF C46-256-1994 | 氣體分析器性能表示.第6部分:光度計分析器(EN 61 207-6) | (Expression of performance of gas analysers. Part 6 : photometric analyzers.) |
| NF C52-108-1969 | 變壓器.帶兩個觸頭的測定放出氣體的防護裝置.特性及制造規則 | (TRANSFORMERS TWO-CONTACT GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.) |
| NF C52-109-1969 | 變壓器.帶一個觸頭的測定放出氣體的防護裝置.特性和制造規則 | (TRANSFORMERS. GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.) |
| NF C52-216-2-2002 | 變壓器和反應堆配件.第2部分:帶保油箱的液體浸漬變壓器和反應堆用氣體和油啟動的繼電器 | (Power transformer and reactor fittings - Part 2 : gas and oil actuated relay for liquid immersed transformers and reactors with conservator.) |
| NF C61-743-1-2002 | 低壓電涌保護裝置元件.第311部分:氣體放電管規范 | (Components for low-voltage surge protective devices - Part 311 : specification for gas discharge tubes (GDT).) |
| NF C64-410-1996 | 額定電壓72.5Kv及以上的氣體絕緣的鐵殼式開關設備 | (Gaz-insulated metal-enclosed switchgear for rated voltages of 72,5 kv and above.) |
| NF C64-410/A11-2001 | 額定電壓72.5kV及以上的氣體絕緣的金屬封閉式開關裝置 | (Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above.) |
| NF C64-4511-1993 | 置于氣體壓力下的高壓裝置用鋁和鋁合金煅制外殼.(歐洲標準 EN 50064).補充件1 | () |
| NF C64-455-1993 | 金屬封閉氣體填充的高壓開關和控制設備的鑄造樹脂分隔部分(歐洲標準EN 50089) | (Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear.) |
| NF C73-854/A1-2002 | 家用和類似用途的電器安全.第2部分:使用液體或氣體的家用表面清洗設備的特殊要求 | (Safety of household and similar electrical appliances - Part 2 : particular requirements for surface-cleaning appliances for household use employing liquids or steam.) |
| NF C93-400-11-14-1997 | 電子設備用機電元件.基本試驗過程和測量方法.第11部分:氣候試驗.第14節:試驗11p:單一流動氣體腐蝕試驗 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 14 : test 11p : flowing single gas corrosion test.) |
| NF C93-400-11-7-1997 | 電子設備用機電元件.基本試驗過程和測量方法.第11部分:氣候試驗.第7節:試驗11g:混合流動氣體腐蝕試驗 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 7 : test 11g : flowing mixed gas corrosion test.) |
| NF C93-471-14-1997 | 電子設備用機電元件.基本試驗規程和測量方法.氣候試驗.試驗11p.流動的單種氣體腐蝕試驗.(歐洲標準 EN 60 51 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 14 : TEST 11P. FLOWING SINGLE GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-14).) |
| NF C93-471-7-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第11部分:氣候試驗.第7節:試驗11G:流動混合氣體腐蝕試驗 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).) |
| NF C93-902-28-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-28部分:試驗.工業氣體(二氧化硫)(歐洲標準EN 61 300-2 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-28 : tests. Industrial atmosphere (sulphur dioxide).) |
| NF C96-022-7-2002 | 半導體器件.機械和氣候試驗方法.第7部分:其他殘余氣體的分析和內部水分含量的測量 | (Semiconductor devices - Mechanical and climatic test methods - Part 7 : internal moisture content measurement and the analysis of other residual gases.) |
| NF D30-003-1992 | 取暖設備.氣體.液體燃料、氣體燃料.兩用熱水 集中采暖鍋爐.按熱規程所必須的熱水供應系統參數的測定 | (HEATING. GAS. LIQUID FUELS,GASEOUS FUEL. DOUBLE HOT WATER CENTRAL HEATING BOILERS. DETERMINATION OF HOT WATER PRODUCTION SYSTEM PARAMETERS NECESSARY FOR APPLICATION OF THE HEAT RULES.) |
| NF D30-500-2003 | 試驗氣體.試驗壓力.儀器種類 | (Test gases - Test pressures - Appliance categories.) |
| NF D30-500/A1-1997 | 試驗氣體.試驗壓力.儀器種類.修改件1 | (Test gases - Test pressures - Appliances categories.) |
| NF D35-001-1965 | 根據加熱容量對各供熱單位(氣體、液體、固體燃料)的選擇 | (CHOICE OF AN INDIVIDUAL HEATING UNIT (SOLID,LIQUID AND GASEOUS FUELS) ACCORDING TO THE VOLUME TO BE HEATED.) |
| NF D35-322-1997 | 配有氣體燃燒器的衛生設備用氣體燃燒連續熱水器(歐洲標準EN 26) | (Gas-fired instantaneous water heaters for sanitory uses production, fitted with atmospheric burners.) |
| NF D35-330-1994 | 燃?xì)饧屑訜徨仩t.輸入熱量不超過70kW的B11和B11BIS型帶氣體燃燒器的鍋爐 | (Gaz-fired central heating boilers. Type B11 and B11BIS boilers fitted with atmospheric burners of nominal heat imput not exceeding 70 kw.) |
| NF D35-334-1985 | 固體或液體燃料轉換成氣體的集中供熱設備.大氣式燃燒器 | (Equipment for the conversion to gas of central heating boilers built for solid and liquid fuels. Atmospheric burners.) |
| NF D35-337-2001 | 加熱.氣體.液體燃料和固體燃料.與排放燃燒產物的機械裝置相連的熱輸出不超過70kW的燃?xì)馐郊屑訜徨仩t | (Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustio) |
| NF D35-339-1980 | 氣體燃料功率在70kW以下的常壓組合鍋爐和鍋爐群 | (GAS FIRED MULTI-FURNACE BOILERS AND GROUPS OF BOILERS WITH ATMOSPHERIC BURNERS,WITH A TOTAL RATED HEAT OUTPUT EQUAL TO OR LESS THAN 70 KW.) |
| NF D35-345/A2-2002 | 氣體點火的中央加熱鍋爐.標稱熱量輸入不超過70KW的C型鍋爐 | (Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW.) |
| NF D36-103-2001 | 家政學.使用管道氣體燃料的家用器具外部連接用(增強)橡膠軟管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.) |
| NF D36-106-1-1997 | 和第1,第2及第3族氣體以及熱水接觸的金屬螺紋連接用密封材料.第1部分:厭氧密封材料 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1 : ANAEROBIE JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-1).) |
| NF D36-106-2-1997 | 和第1,第2及第3族氣體以及熱水接觸的金屬螺紋連接用密封材料.第2部分:非時效硬化的密封材料 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2 : NON-HARDENING JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-2).) |
| NF D36-106-3-1997 | 和第1,第2及第3族氣體以及熱水接觸的金屬螺紋連接用密封材料.第3部分:非燒結的PTFE帶材 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1 ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 3 : UNSINTERED PTFE TAPES. (EUROPEAN STANDARD EN 751-3).) |
| NF D36-306-2002 | 氣體燃燒器和氣體器具的自動關閉閥 | (Automatic shut-off valves for gas burners and gas appliances.) |
| NF D36-351-1969 | 家政學.使用氣體燃料的灶具和洗衣機用的錐形轉動閥門 | (TAPER TURNING COCKS FOR DOMESTIC COOKERS AND WASHING MACHINES USING GASEOUS FUELS.) |
| NF D36-361-1998 | 氣體燃燒器和燃?xì)庠O(shè)施用零點調節器 | (Zero governors for gas burners and gas burning appliances.) |
| NF D36-391-1-1998 | 氣體燃爐和燃?xì)庋b置的燃?xì)?空氣比率的控制.第1部分:風動型.(歐洲標準EN 12067-1) | (Gas/air ratio controls for gas burners and gas burning appliances. Part 1 : pneumatic types.) |
| NF D36-392-2001 | 氣體燃燒器和燃?xì)馄骶叩陌踩涂刂圃O(shè)備.一般要求 | (Safety and control devices for gas burners and gas-burning appliances - General requirements.) |
| NF E09-090-1-1997 | 可引起爆炸的氣體.防爆.第1部分:基本原理和方法 | (EXPLOSIVE ATMOSPHERES. EXPLOSION PREVENTION AND PROTECTION. PART 1 : BASIC CONCEPTS AND METHODOLOGY. (EUROPEAN STANDARD EN 1127-1).) |
| NF E17-301-1999 | 氣體表.雙繪圖氣體表(EN 1359) | (GAS METERS. DIAPHRAGM GAS METERS. (EUROPEAN STANDARD EN 1359).) |
| NF E17-304-2002 | 燃?xì)獗?氣體容量電子轉換裝置 | (Gas meters - Gas-volume electronic conversion devices.) |
| NF E29-139-1998 | 建筑物氣體裝置用手工操作球閥和死底錐形旋塞 | (Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings.) |
| NF E29-171/A1-2001 | 入口壓力100巴以下的氣體壓力調節器 | (Gas pressure regulators for inlet pressures up to 100 bar.) |
| NF E29-175-2003 | 氣體壓力調節站和裝置用安全設備.用于入口壓力最高達100bar的氣體安全關閉裝置 | (Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.) |
| NF E29-551-1939 | 鋼制氣體螺距的連接管.雙接頭 | (STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-552-1936 | 鋼制氣體螺距的連接管.套筒和連接螺帽 | (STEEL CONNECTIONS WITH GAS THREAD. SOCKET AND JOINT NUT.) |
| NF E29-553-1936 | 鋼制氣體螺距的連接管.T形管 | (STEEL CONNECTIONS WITH GAS THREAD. TEES.) |
| NF E29-554-1936 | 鋼制氣體螺距的連接管.全圖 | (STEEL CONNECTIONS WITH GAS THREAD. OVERALL VIEW.) |
| NF E29-645-1-1999 | 可運輸儲氣瓶.氣體和氣體混合物.第1部分:純氣體的特性 | (Transportable gas cylinders. Gases and gas mixtures. Part 1 : properties of pure gases.) |
| NF E29-645-2-1997 | 可運輸?shù)拿簹馄?氣體和氣體混合物.第2部分:氣體和氣體混合物的潛在易燃性和氧化能力的測定 | (Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.) |
| NF E29-648-2-2001 | 可移動式液化氣鋼瓶.內有氣體的鋼瓶和閥材料的配合性.第2部分:非金屬材料 | (Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.) |
| NF E29-693-1-2001 | 氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第1部分:軛型連接 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1 : Yoke type connections.) |
| NF E29-693-2-2001 | 氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第2部分:螺紋連接 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2 : threaded connections.) |
| NF E29-693-3-2001 | 氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第3部分:230巴閥門適配器 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.) |
| NF E29-774-1998 | 可運輸?shù)膬馄?LPG除外).氣體改換過程 | (TRANSPORTABLE GAS CYLINDERS (EXCLUDING LPG). PROCEDURES FOR CHANGE OF GAS SERVICE. (EUROPEAN STANDARD EN 1795).) |
| NF E29-775-1999 | 可移動氣體鋼瓶.乙炔鋼瓶.基本要求和定義(歐洲標準EN 1800) | (TRANSPORTABLE GAS CYLINDERS. ACETYLENE CYLINDERS. BASIC REQUIREMENTS AND DEFINITIONS. (EUROPEAN STANDARD EN 1800).) |
| NF E29-780-2002 | 可運輸儲氣瓶.永久氣體和液化氣(乙炔除外)用蓄電池驅動車輛.灌裝時的檢驗 | (Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E29-792-2002 | 可移動儲氣瓶.恒定氣體和液化氣體(不包括乙炔)用鋼瓶組.灌裝時間的檢查 | (Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E31-001-1969 | 固體，液體和氣體燃料鍋爐 | (BOILERS OPERATING WITH SOLID,LIQUID OR GASEOUS FUELS.) |
| NF E31-402-1/A2-2002 | 非家用單個氣體燃燒器架空輻射管式加熱器.第1部分:安全性 | (Single burner gas-fired overhead radiant-tube heaters for non-domestic use - Part 1 : safety.) |
| NF E31-404-1/A2-2002 | 非家用多個氣體燃燒器架空輻射管式加熱器系統.第1部分:系統D.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF E31-404-1/A3-2002 | 非家用的多個氣體燃燒器架空輻射管式加熱器系統.第1部分:系統D.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF E31-404-2/A2-2002 | 非家用多個氣體燃燒器架空輻射管式加熱器系統.第2部分:系統E.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF E31-404-2/A3-2002 | 非家用的多個氣體燃燒器架空輻射管式加熱器系統.第2部分:系統E.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF E31-404-3/A2-2002 | 非家用多個氣體燃燒器架空輻射管式加熱器系統.第3部分:系統F.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.) |
| NF E31-404-3/A3-2002 | 非家用的多個氣體燃燒器架空輻射管式加熱器系統.第3部分:系統F.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.) |
| NF E31-404-4/A2-2002 | 非家用多個氣體燃燒器架空輻射管式加熱器系統.第4部分:系統H.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF E31-404-4/A3-2002 | 非家用的多個氣體燃燒器架空輻射管式加熱器系統.第4部分:系統H.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF E32-020-5-1991 | 蒸汽發生器.蒸汽鍋爐或過熱蒸汽鍋爐使用的安全.第5部分:工業氣體燃燒設備的特殊規定 | (INSDUSTRIAL HEATING EQUIPMENTS. SAFETY OF STEAM OR SUPERHEATED STEAM GENERATORS,PERMANENTLY MANNED OR NOT. PART 5 : SPECIFIC REQUIREMENTS FOR NON-PULVERIZED COAL-FUELLED INSTALLATIONS.) |
| NF E32-115-7-2002 | 火管鍋爐.第7部分:鍋爐的液體和氣體燃料的點火系統要求 | (Shell boilers - Part 7 : requirements for firing systems for liquid and gaseous fuels for the boilers.) |
| NF E32-200-3-1997 | 工業熱處理設備.第3部分:環境氣體的產生和使用安全要求(歐洲標準EN 746-3) | (INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 3 : SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES. (EUROPEAN STANDARD EN 746-3).) |
| NF E37-102-1-2000 | 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.第1部分:用在可燃?xì)怏w和蒸氣環境的II | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1 : group II engines for use in flammable gas) |
| NF E37-102-2-2000 | 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.第2部分:用在地下工作時對沼氣和/或 | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2 : group I engines for use in underground wo) |
| NF E37-102-3-2000 | 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.第3部分:用在可燃灰塵環境下的II組發 | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3 : group II engines for use in flammable dus) |
| NF E37-211-1-1997 | 往復式內燃機.廢氣排放測量.第1部分:氣體和顆粒廢氣排放的試驗床測定 | (Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.) |
| NF E37-211-2-1996 | 往復式內燃機.排氣污染測定.第2部分:氣體和顆粒物質排放污染的現場測量 | (Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.) |
| NF E37-501-9-2000 | 氣體渦輪.征購.第9部分:可信性,可用性,可維修性和安全性 | (Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.) |
| NF E51-231-2002 | 石油和天然氣工業.旋轉型容積式壓縮機.第2部分:封裝氣體壓縮機(無油) | (Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).) |
| NF E51-233-2003 | 石油、化學和氣體工業.離心壓縮機 | (Petroleum, chemical and gas service industries - Centrifugal compressors.) |
| NF E51-234-2003 | 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 | (Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.) |
| NF E51-235-2003 | 石油和天然氣工業.包裝的往復式氣體壓縮機 | (Petroleum and natural gas industries - Packaged reciprocating gas compressors.) |
| NF E51-718-1998 | 建筑物通風.氣體終端設備.調節器和閥門的動力學試驗 | (Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.) |
| NF E86-020-1974 | 氣體壓力設備.帶標號的調整標記板 | (GAS PRESSURE VESSELS.NAME PLATE FOR STATUTORY IDENTIFICATION MARKINGS.) |
| NF E86-505-2001 | 低溫容器.氣體/材料可混用性 | (Cryogenic vessels - Gas/material compatibility.) |
| NF F19-352-1996 | 鐵路車輛.內部氣體容器涂料 | (RAILWAY ROLLING STOCK. INSIDE AIR TANK PAINT.) |
| NF F36-002-1974 | 鐵路運輸設備.工業貨車.50MM氣體導徑管接頭 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.) |
| NF F37-012-1989 | 液體或低壓溶解氣體運輸用油罐車. 識別和裝載牌 | (TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.) |
| NF H31-411-2001 | 包裝.薄金屬包裝.根據公稱裝填容量限定的有或無附加氣體的飲料用頂開口圓形罐頭 | (Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes.) |
| NF H35-078-1977 | 制瓶工業.玻璃瓶.氣體飲料用瓶.強度要求 | (BOTTLING INDUSTRY. GLASS BOTTLES. CONTAINERS FOR CARBONATED BEVERAGES. STRENGTH REQUIREMENTS.) |
| NF H96-334-2000 | 工業卡車的安全.潛在爆炸環境中的操作.用于可燃?xì)怏w,蒸汽潮氣和灰塵 | (Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.) |
| NF J95-022-1993 | 游艇.電氣裝置.對周圍可燃?xì)怏w引燃防護 | (Small craft. Electrical devices. Protection against ignition of surrounding flammable gases.) |
| NF J95-022/A1-2001 | 小艇.電氣裝置.周圍可燃?xì)怏w點火的防護 | (Small craft - Electrical devices - Protection against ignition of surrounding flammable gases.) |
| NF L54-002-038-1998 | 航空航天系列.電氣及光學連接的元件.試驗方法.第319部分:非焊包裹連接的氣體致密度 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 319 : gastightness of solderless wrapped connections.) |
| NF M07-083-1995 | 液體燃料.在中級餾出物中甲醇乙醚蕓苔子油的鑒定.液體和氣體色譜法. | (LIQUID FUELS. IDENTIFICXATION OF COLZA METHYL ESTER INMIDDLE DISTILLATE. METHOD BY LIQUID AND GAS CHROMATOGRAPHY.) |
| NF M07-094-1998 | 液體石油產品.汽油中苯、甲苯和甲基叔丁基醚的測定.毛細管氣體色譜法 | (LIQUID PETROLEUM PRODUCTS. DETERMINATION OF BENZENE, TOLUENE AND METHYLTERT-BUTYLETHER IN PETROL. METHOD BY CAPILLARY GAS CHROMATOGRAPHY.) |
| NF M08-018-1996 | 石油液體和氣體.動態測量的正確可靠性.電脈沖數據和/或電子脈沖數據的電纜傳輸 | (Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data.) |
| NF M08-023-1999 | 石油液體和液化石油氣體.測量.標準參比條件 | (PETROLEUM LIQUIDS AND LIQUEFIED PETROLEUM GASES. MEASUREMENT. STANDARD REFERENCE CONDITIONS.) |
| NF M50-015-2000 | 燃?xì)夤?yīng)系統.運輸氣體的管線的氣體壓力調節安裝.功能要求 | (Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements.) |
| NF M50-016-2000 | 燃?xì)夤?yīng)系統.運輸和分配氣體的氣體壓力調節站.功能要求 | (Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements.) |
| NF M60-312-1999 | 核能.環境放射性氣體的測量.利用噴霧技術抽取的大氣氚T的活性濃縮的液體閃爍的測定 | (Nuclear energy. Measurement of environmental radioactivity-Air. Determination by liquid scintillation of the activity concentration of atmospheric tritium sampled by the sparging technique (air through water).) |
| NF M62-301-4-2001 | 密封罩用組件.第4部分:通風和氣體清潔系統(如:過濾器和疏水閥)的安全和調節閥門以及控制和保護裝置 | (Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.) |
| NF P18-320-1999 | 混凝土、砂石和灰漿用添加劑.試驗方法.第11部分:硬化混凝土中氣體空隙特性的測定 | (Admixtures for concrete, mortar and grout. Test methods. Part 11 : determination of air void characteristics in hardened concrete.) |
| NF P50-767-2003 | 建筑物的隔熱.建筑物中換氣率的測定.示蹤氣體稀釋法 | (Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method.) |
| NF P78-473-2003 | 建筑物用玻璃.隔熱玻璃組件.第3部分:長期試驗法以及漏氣率和氣體濃度公差的要求 | (Glass in building - Insulating glass units - Part 3 : long term test method and requirements for gas leakage rate and for gas concentration tolerances.) |
| NF R18-702-2-1992 | 道路車輛.3.5噸商業車輛上的自給式加熱系統.第2部分:氣體開動的丁烷/丙烷加熱系統 | (ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 T GVW(R). PART 2 : SPECIFIC SAFETY REQUIREMENTS FOR GAZ OPERATED BUTAN/PROPAN HEATING SYSTEMS.) |
| NF R21-502-1984 | 道路車輛.有點火裝置摩托車排出污染氣體的測量方法 | (Road vehicles. Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ingition engine.) |
| NF S62-002-1991 | 防爆裝置.第2部分:可燃?xì)怏w在空氣中的燃燒指數的測定.(歐洲標準 EN 26184~2) | (EXPLOSION PROTECTION SYSTEMS. PART 2 : DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE GASES IN AIR. (EUROPEAN STANDARD EN 26184-2).) |
| NF S62-003-1991 | 防爆裝置.第3部分:除空氣/粉末混合物和空氣/煤氣混合物以外的可燃混合氣體在空氣中的燃燒指數的測定.(歐洲 | (EXPLOSION PROTECTION SYSTEMS. PART 3 : DETERMINATION OF EXPLOSION INDICES OF FUEL/AIR MIXTURES OTHER THAN DUST/AIR AND GAS/AIR MIXTURES. (EUROPEAN STANDARD EN 26184-3).) |
| NF S62-131-2003 | 固定式消防系統.氣體滅火系統用部件.第1部分:電自動控制和延遲裝置的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 1 : requirements and test methods for electrical automatic control and delay devices.) |
| NF S62-132-2003 | 固定式消防系統.氣體滅火系統用元件.第5部分:非電子自動控制和延遲裝置的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 2 : requirements and test methods for non-electrical automatic control and delay devices.) |
| NF S62-133-2003 | 固定的消防設備.氣體滅火設備用元部件.第3部分:手動觸發裝置和止動裝置的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 3 : requirements and test methods for manual triggering and stop devices.) |
| NF S62-135-2001 | 固定式消防系統.氣體滅火系統用元件.第5部分:CO2系統用的高、低壓選擇器閥門及其起動器的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 5 : requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems.) |
| NF S62-136-2001 | 固定式消防系統.氣體滅火系統用元件.第6部分:CO2系統用的非電氣失效裝置的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 6 : requirements and test methods for non-electrical disable devices for CO2 systems.) |
| NF S62-137-2001 | 固定式消防系統.氣體滅火系統用元件.第7部分:CO2系統噴嘴的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.) |
| NF S62-138-1998 | 固定的消防裝置.氣體滅火裝置用元件.第8部分:CO2裝置用撓性連接器的要求和試驗方法(歐洲標準EN 12094-8) | (Fixed firefighting system. Components for gas extinguishing systems. Part 8 : requirements and test methods for flexible connectors for CO2 systems.) |
| NF S62-139-2003 | 固定的消防設備.氣體滅火設備用元部件.第9部分:專用火災探測器的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 9 : requirements and test methods for special fire detectors.) |
| NF S62-140-2003 | 固定消防系統.氣體滅火系統元件.第10部分:壓力計和壓力開關的試驗方法和要求 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 10 : requirements and test methods for pressure gauges and pressure switches.) |
| NF S62-141-2003 | 固定的消防設備.氣體滅火設備用元部件.第11部分:機械配重設備的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 11: requirements and test methods for mechanical weighing devices.) |
| NF S62-142-2003 | 固定消防系統.氣體滅火系統用元件.第12部分:氣動報警裝置的規范和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 12 : requirements and test methods for pneumatic alarm devices.) |
| NF S62-143-2001 | 固定的消防系統.氣體滅火系統用元件.第13部分:止回閥的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 13 : requirements and test methods for check valves and non-return valves.) |
| NF S62-146-2003 | 固定消防系統.氣體滅火系統用元件.第16部分:CO2低壓系統用添味設備的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 16 : requirements and test methods for odorizing devices for CO2 low pressure systems.) |
| NF S66-202-2003 | 潛在爆炸性氣體.防爆和防護.測定灰塵/空氣混合物的最小點火能 | (Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures.) |
| NF S66-254-1-2003 | 氣體和蒸氣的最大爆炸壓力和最大壓升的測定.第1部分:最大爆炸壓力的測定 | (Determination of the maximum explosion pressure and maximum rate of pressure rise of gases and vapours - Part 1 : determination of the maximum explosion pressure.) |
| NF S74-507-2001 | 防護服.化學試劑的防護.測定防護服面料耐液體和氣體的滲透性 | (Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases.) |
| NF S74-512-1994 | 防護服.防護氣體和蒸氣的試驗方法.泄漏的測定(內壓力試驗) | (PROTECTIVE CLOTHING. PROTECTION AGAINST LIQUID AND GASEOUS CHEMICALS, INCLUDING AEROSOLS LIQUID AND SOLID PARTICLES. TEST METHOD : DETERMINATION OF LEAK-TIGHTNESS OF GAS-TIGHT SUITS (INTERNAL PRESSURE TEST). (EUROPEAN STANDARD EN 464).) |
| NF S74-527-1-2003 | 液體和氣體化學物質(包括液體氣溶膠和固體顆粒)的防護服裝.第1部分:透氣和不透氣的“氣密型“(1型)和“非氣 | (Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1 : performance requirements for ventilated and non-ventilated “gas-tight“ (Type 1) and “) |
| NF S74-527-2-2002 | 防護液體和氣體化學物質(包括液體氣溶膠和固體顆粒)的防護服裝.第2部分:急救隊用氣密性(1型)化學防護套裝的 | (Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2 : performance requirements for “gas-tight“ (Type 1) chemical protective suits for emerg) |
| NF S76-016-2002 | 呼吸保護裝置.防有毒氣體和氣體顆粒吸入的真空管過濾半罩式面具.要求,試驗,標記 | (Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.) |
| NF S76-017-1999 | 呼吸保護裝置.無吸入閥和有防止氣體或氣體微粒或只有微粒的分隔濾膜的半口罩.(歐洲標準EN 1827) | (RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1827).) |
| NF S76-021-2000 | 呼吸保護裝置.氣體過濾器和組合過濾器.要求、試驗、標記 | (Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking.) |
| NF S76-024-3-2003 | 呼吸保護器.氣瓶閥.第3部分:潛水硝基氣體和氧氣氣瓶的出口連接 | (Respiratory protective devices - Gas cylinder valves - Part 3 : outlet connections for diving gases Nitrox and oxygen.) |
| NF S76-025-1992 | 呼吸器官保護設備、過濾低沸點有機化合物的AX氣體過濾器和復合過濾器.要求.試驗.標記 | (RESPIRATORY PROTECTIVE DEVICES. AX GAS FILTERS AND COMBINED FILTERS AGAINST LOW BOILING ORGANIC COMPOUNDS. REQUIREMENTS,TESTING,MARKING. (EUROPEAN STANDARD EN 371).) |
| NF S76-026-1992 | 呼吸器官保護設備、過濾特定種名化合物的SX氣體過濾器和復合過濾器.要求.試驗.標記 | (RESPIRATORY PROTECTIVE DEVICES. SX GAS FILTERS AND COMBINED FILTERS AGAINST SPECIFIC NAMED COMPOUNDS. REQUIREMENS,TESTING,MARKING. (EUROPEAN STANDARD EN 372).) |
| NF S76-046-1997 | 自救式呼吸保護設備.有罩的獨立式開路壓縮氣體呼吸儀.(有罩的壓縮氣體自救器).要求、檢驗和標志(歐洲標準EN | (RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE. SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD). REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1146).) |
| NF S76-061-2003 | 呼吸設備.使用壓縮的硝基氣體和氧氣的開路自主式潛水儀.要求、試驗、標記 | (Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking.) |
| NF S95-144-2000 | 病人呼吸混合氣體用氧氣監測儀.特殊要求 | (Oxygen monitors for patient breathing mixtures - Particular requirements.) |
| NF S95-148-1997 | 麻醉氣體檢測器 | (ANEASTHETIC GAS MONITORS. (EUROPEAN STANDARD EN ISO 11196).) |
| NF S95-154-1998 | 醫用氣體管道系統.第2部分:麻醉氣體清除處理系統.基本要求 | (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.) |
| NF S95-154/A1-2000 | 醫用輸氣管道系統.第2部分:麻醉氣體清除處置系統.基本要求 | (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.) |
| NF S95-155-2000 | 醫用氣體管道系統.第3部分:壓縮醫用氣體管道和真空管道 | (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.) |
| NF S95-157-1-2001 | 麻醉和呼吸設備.人體增濕呼吸氣體用熱及水分交換器(HMEs).第1部分:250ml最小呼吸氣容積的熱及水分交換器 | (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1 : HMEs for use with minimum tidal volumes of 250 ml.) |
| NF S95-157-2-2003 | 麻醉和呼吸設備.使人體呼吸氣體增濕的熱和濕氣交換器(HMEs).第2部分:潮氣量最小為250ml的氣管造口病人用熱 | (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2 : HMEs for use with tracheostomized patients having minimum tidal volumes) |
| NF S95-159/A1-2002 | 醫用氣體壓力調節器.第1部分:壓力調節器和帶流量計的壓力調節器 | (Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow metering devices.) |
| NF S95-162-1998 | 醫用氣體管道系統.第1部分:醫用壓縮氣體和真空裝置的終端元件 | (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.) |
| NF S95-163-1998 | 醫用氣體管道系統.第4部分:麻醉氣體清除系統的終端元件 | (Medical gas pipeline systems. Part 4 : terminal units for anaesthetic gas scavenging systems.) |
| NF S95-169-1999 | 與醫用氣體管道系統終端元件連接的流量測量設備 | (Flow-metering devices for connection to terminal units of medical gas pipeline systems.) |
| NF S95-171-1999 | 醫用氣體用壓力調節器.多功能的和線狀壓力調節器(歐洲標準738-2) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 2 : MANIFOLD AND LINE PRESSURE REGULATORS. (EUROPEAN STANDARD EN 738-2).) |
| NF S95-174-1998 | 醫用氣體用的低壓軟管組件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF S95-174/A1-2002 | 醫用氣體用低壓軟管組件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF S95-178-1998 | 醫用氣體用壓力調節器.第3部分:與鋼瓶閥門相結合的壓力調節器(歐洲標準EN 738-3) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).) |
| NF S95-178/A1-2002 | 醫用氣體壓力調節器.第3部分:帶瓶閥的壓力調節器 | (Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.) |
| NF S95-179-1998 | 用于醫用氣體的壓力調節器.第4部分:結合醫用設備的低壓調節器(歐洲標準EN 738-4) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4 : LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT. (EUROPEAN STANDARD EN 738-4).) |
| NF S95-179/A1-2002 | 醫用氣體壓力調節器.第4部分:裝入醫療設備的低壓調節器 | (Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.) |
| NF S95-184-2000 | 醫用氣體用高壓柔性連接件. | (High-pressure flexible connections for use with medical gases.) |
| NF T20-037-1985 | 化工產品.揮氣性液體和氣體自燃溫度的測定 | (Chemical products of industrial use. Determination of temperature of auto-inflammation of volatil liquids and gases.) |
| NF T20-040-1985 | 化工產品.固體和液體經過水解產生氣體的著火點的測定 | (CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES FORMED AFTER HYDROLYSIS OF SOLIDS AND LIQUIDS.) |
| NF T20-041-1985 | 化工產品.氣體著火點的測定 | (CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES.) |
| NF T20-381-1977 | 工業氫氧化鉀.碳酸鹽含量的測定.氣體定量分析法 | (POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD.) |
| NF T20-427-1976 | 工業氫氧化鈉.碳酸鹽的測定.氣體定量法 | (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS VOLUMETRIC METHOD.) |
| NF T20-524-1973 | 工業硅酸鈉硅酸鉀.碳酸鈉和碳酸鉀中二氧化硅含量的測定.氣體定量法 | (SODIUM AND POTASSIUM SILICATES FOR INDUSTRIAL USE. DETERMINATION OF CARBON DIOXIDE CONTENT EXPRESSED AS SODIUM OR POTASSIUM CARBONATE. GAS-VOLUMETRIC METHOD.) |
| NF T47-306-2003 | 彈性密封件.輸送氣體和碳?xì)湟后w的管道和配件用密封件的材料要求 | (Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.) |
| NF T51-436-2002 | 塑料.酚醛樹脂.用氣體色譜法測定殘余酚的含量 | (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.) |
| NF T54-065-1-2003 | 氣體燃料的塑料管道供應系統.聚乙烯(PE).第1部分:總則 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.) |
| NF T54-065-2-2003 | 氣體燃料的塑料管道供應系統.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.) |
| NF T54-065-3-2003 | 氣體燃料的塑料管道供應系統.聚乙烯(PE).第3部分:配件 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-065-4-2003 | 氣體燃料的塑料管道供應系統.聚乙烯(PE).第4部分:閥門 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-065-5-2003 | 氣體燃料的塑料管道供應系統.聚乙烯(PE).第5部分:系統的配合 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T60-254-1997 | 動植物油脂.固醇成份合成物測定.用高壓液相色譜隔離固醇總量的氣體色譜測定方法 | (ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF THE COMPOSITION OF THE STEROL FRACTION. METHOD BY GAS CHROMATOGRAPHY WITH ISOLATION OF TOTAL STEROLS BY HPLC.) |
| NF T60-502-1988 | 潤滑劑、工業潤滑油及其產品(L類).分類,第3B部分:D系列(氣體和制冷壓縮機用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3B : FAMILY D (GAS AND REFRIGERATION COMPRESSORS).) |
| NF T70-331-1995 | 軍用高能材料.物理化學分析及特性.氣體膨脹計測量抗拉試驗過程中體積的變化 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. VOLUME VARIATION MEASUREMENT IN A TENSILE TEST BY FARRIS GAS DILATOMETER.) |
| NF T90-324-1998 | 水質.消化污泥中有機化合物的“最大“厭氧生物降解性的評價.生物氣體制品測量法 | (Water quality. Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production.) |
| NF X10-141-1982 | 密封管道中氣體流量的測定.示蹤法.第1部分：綜合 | (Measurement of gas flow in conduits. Tracer methods. Part 1 general.) |
| NF X10-144-1982 | 密封管道中氣體流量的測定.示蹤法.第4部分：放射性示蹤物的過渡時間法 | (MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.) |
| NF X11-620-1996 | 通過氣體吸收用Branauer、Emmet和Teller(BET)方法測定固體的比表面積 | (Determination of the specific surface area of solids by gas adsorption using the bet method.) |
| NF X11-621-1975 | 用氣體吸附法測定粉末的單位面積.BET法.用低溫氮?dú)馕阶饔脺y定體積 | (DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. B.E.T. METHOD : VOLUMETRIC MEASUREMENT OF THE ADSORPTION OF NITROGEN AT LOW TEMPERATURES.) |
| NF X11-622-1977 | 用氣體吸附法測定粉末單位質量的面積.基本方法的多種解釋 | (DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. VARIOUS READINGS OF THE BASIC METHOD.) |
| NF X20-101-1984 | 氣體分析.詞匯 | (Gas analysis. Vocabulary.) |
| NF X20-201-1979 | 氣體分析.校準用混合氣體.混合氣體制備證書 | (GAS ANALYSIS. CALIBRATION GAS MIXTURES. CERTIFICATE OF MIXTURE PREPARATION.) |
| NF X20-202-1979 | 氣體分析.校準用混合氣體的制備.重量法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. GRAVIMETRIC METHODS.) |
| NF X20-203-1981 | 氣體分析.校準用混合氣體的制備.靜態體積測定法 | (Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods.) |
| NF X20-204-1974 | 氣體分析.用配量活塞泵對氣體混合物的動力制備進行校準的方法 | (GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.) |
| NF X20-207-1982 | 氣體分析.校準用混合氣體成分的測定.比較法 | (Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.) |
| NF X20-209-1979 | 氣體分析.校準用混合氣體的制備.滲透法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. PERMEATION METHOD.) |
| NF X20-211-1983 | 氣體分析.校準用混合氣體的制備.單位質量動力法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MASS DYNAMIC METHOD.) |
| NF X20-212-1986 | 氣體分析.校正混合的制備.動態容量法.第1部分:計算法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 1 : METHODS OF CALIBRATION.) |
| NF X20-214-1986 | 氣體分析.校正混合的的制備.動態容量法.第3部分:定期注入流動氣流 | (Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3 : periodic injections into a flowing gas stream.) |
| NF X20-215-1986 | 氣體分析.校正混合的的制備.動態容量法.第4部分:連續注入法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 4 : CONTINUOUS INJECTION METHOD.) |
| NF X20-217-1986 | 氣體分析.校正混合的的制備.動態容量法.第6部分:聲學孔 | (Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.) |
| NF X20-220-1981 | 用比較法進行校準用混合氣體的鑒定 | (ANALYSIS OF GASES. CHECKING OF CALIBRATION GAS MIXTURES BY A COMPARISON METHOD.) |
| NF X20-251-1982 | 氣體分析.供應分析裝置用的氣體取樣和輸送設備 | (Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.) |
| NF X20-302-1974 | 質譜儀進行氣體分析.化學成分的測定 | (GAS ANALYSIS BY MASS SPECTROMETRY. DETERMINATION OF GAS CHEMICAL COMPOSITION.) |
| NF X20-303-1974 | 氣相色層分離法進行氣體分析 | (GAS ANALYSIS BY MEANS OF GAS CHROMATOGRAPHY.) |
| NF X20-305-1975 | 電導法進行氣體分析 | (GAS ANALYSIS BY ELECTRICAL CONDUCTIMETRY.) |
| NF X20-307-1977 | 比色法進行氣體分析 | (GAS ANALYSIS BY COLORIMETRY.) |
| NF X20-350-1979 | 氣體分析.二氧化硫的分析.分析方法選擇指南 | (GAS ANALYSIS. SULFUR DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.) |
| NF X20-354-1975 | 氣體分析.連續比色法測定二氧化硫 | (GAS ANALYSIS - DETERMINATION OF SULPHUR DIOXIDE BY CONTINUOUS COULOMETRIC METHOD.) |
| NF X20-355-1975 | 氣體分析.電導法測定二氧化硫 | (GAS ANALYSIS-DETERMINATION OF SULFUR DIOXIDE BY ELECTRICAL CONDUCTIMETRY.) |
| NF X20-361-1976 | 氣體分析.非擴散紅外線輻射束吸收法測定一氧化碳 | (GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY ABSORPTION OF A NON DISPERSIVE INFRA-RED RADIATION BEAM.) |
| NF X20-363-1978 | 氣體分析.氣相色層分離法測定一氧化碳 | (GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY MEANS OF GAS CHROMATOGRAPHY.) |
| NF X20-378-1979 | 氣體分析.氧含量分析.固體電解電化學法 | (GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHOD WITH SOLID ELECTROLYTE.) |
| NF X20-379-1979 | 氣體分析.氧含量分析.液體或凝膠電解的電化學法 | (GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHODS WITH LIQUID OR GELLED ELECTROLYTE.) |
| NF X20-380-1979 | 氣體分析.二氧化碳的分析.分析方法選擇指南 | (GAS ANALYSIS. CARBON DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.) |
| NF X20-510-3-2003 | 天然氣.用氣相色譜法測定規定了不確定度的組分.第3部分:用兩填充柱測定氫、氦、惰性氣體和碳最高至C8的烴類 | (Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3 : determination of hydrogen, helium, inert gases and hydrocarbons up to C8 using two packed columns.) |
| NF X20-521-1981 | 氣體分析.天然氣露點的測定.表面冷卻露點濕度計 | (Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygromete%rs.) |
| NF X20-702-2000 | 化學呼吸分析計.用呼出氣體分析來估計乙醇浸潤.規范和試驗方法 | (Chemical breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X20-703-2000 | 1級電子呼吸分析計.用呼出氣體分析來估計乙醇浸潤.規范和試驗方法 | (Class 1 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X20-704-2000 | 2級電子呼吸分析儀.通過對呼出的氣體分析對乙醇的估計.規范和試驗方法 | (Class 2 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X43-010-1975 | 大氣污染.酸性氣體污染指數的測定 | (AIR POLLUTION. DETERMINATION OF A GAZEOUS ACID POLLUTION INDEX.) |
| NF X43-011-1975 | 大氣污染.周圍空氣中含硫氣體的測定取樣設備和方法 | (AIR POLLUTION. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR SAMPLING EQUIPMENT AND METHOD.) |
| NF X43-016-1977 | 大氣污染.酸性氣體污染指數的測定方法（用當量ＳＯ2表示）.連續取樣自動順序分析方法 | (METHOD FOR THE DETERMINATION OF AN ACID GAS POLLUTION INDEX(EXPRESSED AS SO2 EQUIVALENT)USING A CONTINUOUS SAMPLING AUTOMATIC SEQUENTIAL ANALYSER.) |
| NF X43-060-1-2003 | 環境空氣質量.測定氣體和蒸氣濃度的擴散取樣機.要求和試驗方法.第1部分:一般要求 | (Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements.) |
| NF X43-060-2-2003 | 環境空氣質量.測定氣體和蒸氣濃度的擴散取樣機.要求和試驗方法.第2部分:特殊要求和試驗方法 | (Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2 : specific requirements and test methods.) |
| NF X43-101-1986 | 空氣質量.氣體排出物氣味的測定方法.承受限度的稀度系數的測定 | (Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.) |
| NF X43-104-1995 | 空氣質量.有氣味的氣體.取樣方法 | (Air quality. Odoring atmospheres. Sampling methods.) |
| NF X43-246-1-2000 | 工作場所空氣.有毒氣體和蒸汽的直接濃縮測量和直接測量的電氣裝置.第1部分:一般要求和試驗方法 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1 : general requirements and test methods.) |
| NF X43-246-2-2000 | 工作場所空氣.有毒氣體和蒸汽的直接濃縮測量和直接測量的電氣裝置.第2部分:用于測量限定值范圍內的電氣裝置 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2 : performance requirements for apparatus used for me) |
| NF X43-246-3-2000 | 工作場所空氣.有毒氣體和蒸汽的直接濃縮測量和直接測量的電氣裝置.第3部分:用于測量限定值范圍之上的電氣裝 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for me) |
| NF X43-246-4-2000 | 工作場所空氣.有毒氣體和蒸汽的直接濃縮測量和直接測量的電氣裝置.第4部分:選擇,使用安裝和維修指南 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4 : guide for selection, installation, use and mainten) |
| NF X43-278-1996 | 工作場所的空氣.測定氣體和水蒸氣用的擴散取樣器.要求和試驗方法 | (WORKPLACE ATMOSPHERES. DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 838).) |
| NF X43-279-1995 | 工作場所的氣體.為與極限值比較和測量對策用評定化學試劑影響的導則 | (WORKPLACE ATMOSPHERES. GUIDANCE FOR THE ASSESSMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS FOR COMPARISON WITH LIMIT VALUES AND MEASUREMENT STRATEGY. (EUROPEAN STANDARD EN 689).) |
| NF X43-286-1997 | 工作環境的空氣.氣體和蒸汽測定用抽氣式吸附管.要求和試驗方法(歐洲標準EN 1076) | (WORKPLACE ATMOSPHERES. PUMPED SORBENT TUBES FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1076).) |
| NF X43-320-1998 | 空氣質量.穩定源輻射.HCI測定的手工方法.第1部分:氣體取樣 | (Air quality. Stationary source emissions. Manual method of determination of HCI. Part 1 : sampling of gases.) |
| NF X43-321-1998 | 空氣質量.穩定源輻射.HCI測定的手工方法.第2部分:氣體化合物吸收 | (Air quality. Stationary source emissions. Manual method of determination of HCI. Part 2 : gaseous compounds absorption.) |
| NF X43-328-1999 | 穩定源輻射.煙道氣體低濃度時所有氣化有機碳濃縮質量的測定.連續火焰離子檢測器法 | (STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON AT LOW CONCENTRATIONS IN FLUE GASES. CONTINUOUS FLAME IONISATION DETECTOR METHOD. (EUROPEAN STANDARD EN 12619).) |
| NF X43-640-2002 | 氣體分析.詞匯 | (Gas analysis - Vocabulary.) |
| NF X44-014-1-1998 | 高效氣體過濾器(HEPA和ULPA).第1部分:分類、性能試驗和作標記 | (High efficiency air filters (HEPA and ULPA). Part 1 : classification, performance testing, marking.) |
| NF X44-014-2-1998 | 高效氣體過濾器(HEPA和ULPA).第2部分:煙霧質產品測量設備和粒子計數統計 | (High efficiency air filters (HEPA and ULPA). Part 2 : aerosol production, measuring equipment, particle counting statistics.) |
| NF X44-014-3-1998 | 高效氣體過濾器(HEPA和ULPA).第3部分:平板過濾器介質試驗 | (High efficiency air filters (HEPA and ULPA). Part 3 : testing flat sheet filter media.) |
| NF X50-001-5-2-1998 | 發電站設備的采購指南.第5-2部分:渦輪機.氣體渦輪機 | (Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.) |
| NF X70-100-1-2001 | 燃燒試驗.廢氣的分析.第1部分:熱降解產生氣體的分析方法 | (Fire tests - Analysis of gaseous effluents - Part 1 : methods for analysing gases stemming from thermal degradation.) |
| NF X70-101-1987 | 防火安全.燃燒試驗.燃燒和裂解氣體的分析.煙室法 | (Safety against fire. Fire behaviour tests. Analysis of gases resulting of combustion or pyrolysis. Test chamber method.) |
| XP D36-127-1999 | 用在家畜飼養棚的氣體燃料裝置的室外連接系統 | (Outdoor connection system for gaseous fuel appliances used in livestock breeding buildings.) |
| XP E29-140-1999 | 使用氣體燃料的家用裝置的控制閥.安全控制閥(帶有集中自動密閉器的) | (Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).) |
| 編號 | 中文名稱 | 英文名稱 |