| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DL/T 542-1994(2005) | 鋼熔化焊T形接頭角焊縫超聲波檢驗方法和質量分級 | () |
| DL/T 820-2002 | 管道焊接接頭超聲波檢驗技術規程 | () |
| DL/T 821-2002 | 鋼制承壓管道對接焊接接頭射線檢驗技術規范 | () |
| GB/T 10752-2005 | 船用鋼管對焊接頭 | Marine steel butt-welding fittings |
| GB/T 11265-1989 | 輕軌用接頭夾板 | Fish plates for light rails |
| GB/T 11363-2008 | 釬焊接頭強度試驗辦法 | Test method of the strength for brazed and soldered joint |
| GB/T 11618.1-2008 | 銅管接頭 第1部分:釬焊式管件 | () |
| GB/T 11618.2-2008 | 銅管接頭.第2部分:卡壓式管件 | Pipe fittings of copper and copper alloys.Part 2:Fittings of press type |
| GB/T 12465-2007 | 管路補償接頭 | Piping compensatory couplings |
| GB/T 12605-2008 | 無損檢測.金屬管道熔化焊環向?qū)咏宇^射線照相檢測方法 | Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
| GB/T 12736-2009 | 輸送帶 機械接頭強度的測定 靜態試驗方法 | () |
| GB/T 14137-1993 | 光纖機械式固定接頭插入損耗測試方法 | Optical fiber mechanical-type splice insertion loss test |
| GB/T 14149-1993 | 實驗室玻璃儀器 互換球形磨砂接頭 | Laboratory glassware--Interchangeable spherial ground joints |
| GB/T 14171-1993 | 氣制動管路螺紋孔和管接頭外螺紋 | Motor vehicles--Pneumatic braking systems--Tapped holes and male fittings |
| GB/T 14514.1-1993 | 氣動管接頭試驗方法 | Pneumatic fluid power. Tube fittings. Test methods |
| GB/T 15830-2008 | 無損檢測.鋼制管道環向焊縫對接接頭超聲檢測方法 | Non-destructive testing.Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes |
| GB/T 16529-1996 | 光纖光纜接頭 第1部分;總規范 構件和配件 | Splices for optical fibres and cables. Part 1: Generic specification--Hardware and accessories |
| GB/T 16529.2-1997 | 光纖光纜接頭 第2部分;分規范 光纖光纜接頭盒和集纖盤 | Splices for optical fibres and cables. Part 2: Sectional specification. Splice organizers and closures for optical fibres and cables |
| GB/T 16529.3-1997 | 光纖光纜接頭 第3部分;分規范 光纖光纜熔接式接頭 | Splices for optical fibres and cables. Part 3: Sectional specification. Fusion splices for optical fibres and cables |
| GB/T 16529.4-1997 | 光纖光纜接頭 第4部分;分規范 光纖光纜機械式接頭 | Splices for optical fibres and cables. Part 4: Sectional specification. Mechanical splices for optical fibres and cables |
| GB/T 16693-1996 | 軟管快速接頭 | Quick hose's connection |
| GB/T 16957-1997 | 復合鋼板焊接接頭力學性能試驗方法 | Mechanical tests on welded joints in clad plates |
| GB/T 16989-1997 | 土工布 接頭/接縫寬條拉伸試驗方法 | () |
| GB/T 18615-2002 | 波紋金屬軟管用非合金鋼和不銹鋼接頭 | Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses |
| GB/T 19418-2003 | 鋼的弧焊接頭 缺陷質量分級指南 | Arc-welded joints in steel-Guidance on quality levels for imperfections |
| GB/T 19471.1-2004 | 塑料管道系統 硬聚氯乙烯(PVC-U)管材彈性密封圈式承口接頭 偏角密封試驗方法 | Plastics piping systems-Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes-Test method for leaktighness under internal pressure and angular deflection |
| GB/T 19471.2-2004 | 塑料管道系統 硬聚氯乙烯(PVC-U)管材彈性密封圈式承口接頭 負壓密封試驗方法 | Plastics piping systems-Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes-Test method for leaktightness under negative pressure |
| GB/T 1962.1-2001 | 注射器、注射針及其他醫療器械6%(魯爾)圓錐接頭 第1部分;通用要求 | The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement |
| GB/T 1962.2-2001 | 注射器、注射針及其他醫療器械6%(魯爾)圓錐接頭 第2部分;鎖定接頭 | Conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment Part 2: Lock fittings |
| GB/T 19674.1-2005 | 液壓管接頭用螺紋油口和柱端 螺紋油口 | Connections for general use and fluid power Ports and stud ends with thread-Threaded port |
| GB/T 19674.2-2005 | 液壓管接頭用螺紋油口和柱端 填料密封柱端(A型和E型) | Connections for general use and fluid power Ports and stud ends with thread.Stud ends with elastomeric sealing(A type and type E) |
| GB/T 19674.3-2005 | 液壓管接頭用螺紋油口和柱端 金屬對金屬密封柱端(B型) | Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B) |
| GB/T 19810-2005 | 聚乙烯(PE)管材和管件 熱熔對接接頭 拉伸強度和破壞形式的測定 | Polyethylene(PE)pipe and fittings.Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| GB/T 2031-1994 | 船用消防接頭 | Marine fire-fighting coupeigs |
| GB/T 21297-2007 | 實驗室玻璃儀器 互換錐形磨砂接頭 | Laboratory glassware-Interchangeable conical ground joint |
| GB/T 21359-2008 | 食品和供水工業用不銹鋼螺紋接頭 | Stainless steel tube threaded couplings for the food and water industry |
| GB/T 21400.2-2008 | 絞盤式噴灌機.第2部分:軟管和接頭.試驗方法 | Traveller irrigation machines.Part 2:Softwall hose and couplings.Test methods |
| GB/T 21410-2008 | 石油天然氣工業.井下工具.鎖定心軸和定位接頭 | Petroleum and natural gas industries.Downhole equipment.Lock mandrels and landing nipples |
| GB/T 22076-2008 | 氣動圓柱形快換接頭 插頭連接尺寸、技術要求、應用指南和試驗 | Pneumatic fluid power. Cylindrical quick-action couplings. Plug connecting dimensions, specifications, application guidelines and testing |
| GB/T 22085.1-2008 | 電子束及激光焊接接頭.缺欠質量分級指南.第1部分:鋼 | Electron and laser beam welded joints-Guidance on quality levels for imperfections-Part 1:Steel |
| GB/T 22085.2-2008 | 電子束及激光焊接接頭.缺欠質量分級指南.第2部分:鋁及鋁合金 | Electron and laser beam welded joints-Guidance on quality levels for imperfection-Part 2:Aluminium and its weldable alloys |
| GB/T 22087-2008 | 鋁及鋁合金的弧焊接頭.缺欠質量分級指南 | Arc-welded joints in aluminium and its alloys.Guidance on quality levels for imperfection |
| GB/T 23682-2009 | 制冷系統和熱泵 軟管件、隔震管和膨脹接頭 要求、設計與安裝 | () |
| GB/T 2649-1989 | 焊接接頭機械性能試驗取樣方法 | Methods of sampling for mechanical properties tests of welded joint |
| GB/T 2650-2008 | 焊接接頭沖擊試驗方法 | Impact test methods on welded joints |
| GB/T 2651-2008 | 焊接接頭拉伸試驗方法 | Tensile test method on welded joints |
| GB/T 2653-2008 | 焊接接頭彎曲試驗方法 | Bend test methods on welded joints |
| GB/T 2654-2008 | 焊接接頭硬度試驗方法 | Hardness test methods on welded joints |
| GB/T 3323-2005 | 金屬熔化焊焊接接頭射線照相 | Radiographic examination of fusion welded joints in metallic materials |
| GB/T 3733-2008 | 卡套式端直通管接頭 | 24°cone connectors.Straight thread |
| GB/T 3734-2008 | 卡套式錐螺紋直通管接頭 | 24°cone connectors.Male |
| GB/T 3735-2008 | 卡套式端直通長管接頭 | 24° cone connectors. Straight thread long |
| GB/T 3736-2008 | 卡套式錐螺紋長管接頭 | 24° cone connectors. Male long |
| GB/T 3737-2008 | 卡套式直通管接頭 | 24°cone connectors.Union |
| GB/T 3738-2008 | 卡套式可調向端彎通管接頭 | 24° cone connectors. Straight thread elbow |
| GB/T 3739-2008 | 卡套式錐螺紋彎通管接頭 | 24°cone connectors.Male elbow |
| GB/T 3740-2008 | 卡套式彎通管接頭 | 24°cone connectors.Union elbow |
| GB/T 3741-2008 | 卡套式可調向端三通管接頭 | 24°cone connectors.Straight thread tee |
| GB/T 3742-2008 | 卡套式錐螺紋三通管接頭 | 24°cone connectors.Male tee |
| GB/T 3743-2008 | 卡套式可調向端彎通三通管接頭 | 24° cone connectors.Straight thread run tee |
| GB/T 3744-2008 | 卡套式錐螺紋彎通三通管接頭 | 24° cone connectors.Male run tee |
| GB/T 3745-2008 | 卡套式三通管接頭 | 24° cone connectors.Union tee |
| GB/T 3746-2008 | 卡套式四通管接頭 | 24° cone connectors. Union cross |
| GB/T 3747-2008 | 卡套式焊接管接頭 | 24° cone connectors.Weld male |
| GB/T 3748-2008 | 卡套式過板直通管接頭 | 24° cone connectors.Bulkhead union |
| GB/T 3749-2008 | 卡套式過板彎通管接頭 | 24° cone connectors.Bulkhead union elbow |
| GB/T 3750-2008 | 卡套式鉸接管接頭 | 24°cone connectors.Angle swivel screw connector |
| GB/T 3751-2008 | 卡套式壓力表管接頭 | 24° cone connectors.Connector for pressure gauge |
| GB/T 3752-2008 | 卡套式組合彎通管接頭 | 24°cone connectors.Adjustable elbow |
| GB/T 3753-2008 | 卡套式組合三通管接頭 | 24° cone connectors.Adjustable tee |
| GB/T 3754-2008 | 卡套式錐密封組合彎通管接頭 | 24° cone connectors.Swivel elbow with O-ring |
| GB/T 3755-2008 | 卡套式錐密封組合三通管接頭 | 24°cone connectors.Branch tee with O-ring |
| GB/T 3756-2008 | 卡套式錐密封組合直通管接頭 | 24°cone connectors.Swivel stud straight adapter with O-ring with stud end |
| GB/T 3757-2008 | 套式過板焊接管接頭 | 24° cone connectors. Weld-in bulkhead straight connector |
| GB/T 3758-2008 | 卡套式管接頭用錐密封焊接接管 | 24° cone connectors. Weld-on nipple |
| GB/T 3759-2008 | 卡套式管接頭用連接螺母 | 24°cone connectors.Nut |
| GB/T 3760-2008 | 卡套式管接頭用錐密封堵頭 | 24° cone connectors.Plug with O-ring |
| GB/T 3761-1983 | 卡套式管接頭用錐體環 | Bite type tube fittings--Pressure bush for butt joints |
| GB/T 3762-1983 | 卡套式管接頭用尖角密封墊圈 | Bite type tube fittings--Tipping washer |
| GB/T 3763-2008 | 管接頭用六角薄螺母 | 24°cone connectors and flared couplings.Hexagon thin nut |
| GB/T 3765-2008 | 卡套式管接頭技術條件 | 24°cone connectors.Specification |
| GB/T 5107-2008 | 氣焊設備 焊接、切割和相關工藝設備用軟管接頭 | Gas welding equipment.Hose connections for equipment for welding,cutting and allied processes |
| GB/T 5625-2008 | 擴口式直通管接頭 | FLared couplings-Straight thread |
| GB/T 5626-2008 | 擴口式錐螺紋直通管接頭 | Flared couplings.Male |
| GB/T 5627-2008 | 擴口式錐螺紋長管接頭 | Flared couplings.Male long |
| GB/T 5628-2008 | 擴口式直通管接頭 | Flared couplings.Union |
| GB/T 5629-2008 | 擴口式錐螺紋彎通管接頭 | Flared couplings.Male elbow |
| GB/T 5630-2008 | 擴口式彎通管接頭 | Flared couplings. Union elbow |
| GB/T 5631-2008 | 擴口式可調向端彎通管接頭 | Flared couplings. Straight thread elbow |
| GB/T 5632-2008 | 擴口式組合彎通管接頭 | Flared couplings.Swivel elbow |
| GB/T 5633-2008 | 擴口式可調向端三通管接頭 | Flared couplings. Straight thread branch tee |
| GB/T 5634-2008 | 擴口式組合彎通二通管接頭 | Flared couplings.Swivel run tee |
| GB/T 5635-2008 | 擴口式錐螺紋三通管接頭 | Flared couplings.Male branch tee |
| GB/T 5637-2008 | 擴口式可調向端彎通三通管接頭 | Flared couplings. Straight thread run tee |
| GB/T 5638-2008 | 擴口式組合三通管接頭 | Flared couplings.Swivel branch tee |
| GB/T 5639-2008 | 擴口式三通管接頭 | Flared couplings-Union tee |
| GB/T 5641-2008 | 擴口式四通管接頭 | Flared couplings.Union cross |
| GB/T 5642-2008 | 擴口式焊接管接頭 | Flared couplings. Weld male |
| GB/T 5643-2008 | 擴口式過板直通管接頭 | Flared couplings-Bulkhead union |
| GB/T 5644-2008 | 擴口式過板彎通管接頭 | Flared couplings. Bulkhead union elbow |
| GB/T 5645-2008 | 擴口式壓力表管接頭 | Flared couplings.Connector for pressure gauge |
| GB/T 5646-2008 | 擴口式管接頭管套 | Flared couplings. Sleeve |
| GB/T 5647-2008 | 擴口式管接頭用A型螺母 | Flared couplings. Style A nut |
| GB/T 5648-2008 | 擴口式管接頭用B型螺母 | Flared couplings. Style B nut |
| GB/T 5649-2008 | 管接頭用鎖緊螺母和墊圈 | Flared couplings.Lock nut and lockup washer |
| GB/T 5650-2008 | 擴口式管管接頭用空心螺栓 | Flared couplings. Inverted flare bolts |
| GB/T 5651-2008 | 擴口式管接頭用密合墊 | Flared couplings. Seat insert |
| GB/T 5652-2008 | 擴口式管接頭擴口端尺寸 | Flared couplings.Flared end |
| GB/T 5653-2008 | 擴口式管接頭技術條件 | Flared couplings. Specification |
| GB/T 5742-1999 | 船用飲水艙注入接頭 | Filling connection for drinking water tanks on ships |
| GB/T 5860-2003 | 液壓快換接頭 尺寸和要求 | Hydraulic fluid power—Quick-action couplings Dimensions and requirements |
| GB/T 5861-2003 | 液壓快換接頭 試驗方法 | Hydraulic fluid power-Quick action couplings-Test methods |
| GB/T 5862-2008 | 農業拖拉機和機具.通用液壓快換接頭 | Agricultural tractors and machinery.General purpose quick-action hydraulic couplers |
| GB/T 5973-2006 | 鋼絲繩用楔形接頭 | Cuneiform connector for use with steel wire ropes |
| GB/T 6329-1996 | 膠粘劑對接接頭拉伸強度的測定 | Adhesives--Determination of tensile strength of butt joints |
| GB/T 6417.1-2005 | 金屬熔化焊接頭缺欠分類及說明 | Classification and explanation of imperfections in fusion welded joints |
| GB/T 6417.2-2005 | 金屬壓力焊接頭缺欠分類及說明 | Classification and explanation of imperfections in pressure welded joints |
| GB/T 6661-1986 | 插入式耳機的乳頭狀接頭 | Nipples for insert earphones |
| GB/T 6946-2008 | 鋼絲繩鋁合金壓制接頭 | () |
| GB/T 7937-2008 | 液壓氣動管接頭及其相關元件.公稱壓力系列 | Fluid power systems and components.Connectors and associated components.Nominal pressures |
| GB/T 7940.1-2008 | 氣動.五氣口方向控制閥.第1部分:不帶電氣接頭的安裝面 | Pneumatic fluid power.Five-port directional control valves.Part1:Mounting interface suifaces without electrical connector |
| GB/T 7940.2-2008 | 氣動.五氣口方向控制閥.第2部分:帶可選電氣接頭的安裝面 | Pneumatic fluid power.Five-port directional control valves.Part2:Mounting interface surfaces with optional electrical connector |
| GB/T 8259-2008 | 卡箍式柔性管接頭.技術條件 | Specification for flexible joints of housing |
| GB/T 8260-2008 | 卡箍式柔性管接頭.型式與尺寸 | Types and dimensions of flexible joints of housing |
| GB/T 8606-2003 | 液壓快換接頭螺紋連接尺寸及技術要求 | Thread connecting dimensions and specifications of hydraulic fluid power-Quick action couplings |
| GB/T 9065.1-1988 | 液壓軟管接頭 連接尺寸 擴口式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 1--Flare type) |
| GB/T 9065.2-1988 | 液壓軟管接頭 連接尺寸 卡套式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 2--Insert type) |
| GB/T 9065.3-1988 | 液壓軟管接頭 連接尺寸 焊接式或快換式 | Hydraulic fluid power--Hose connector--Connecting dimension(Part 3:Welding or quick-action type) |
| GB/T 9326.4-2008 | 交流500kV及以下紙或聚丙烯復合紙絕緣金屬套充油電纜及附件.第4部分: 接頭 | Oil-filled,paper or polypropylene paper laminate insulated,metal-sheathed cables and accessories for alternating voltages up to and including 500 kV.Part 4:Joint |
| HD 623 S1-1996+A1-2001 | 額定電壓 0.6/1.0 kV 配電電纜的接頭、止動端和室外終端規范 | Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07). |
| HG/T 2270-1992 | 內胎接頭機 | () |
| HG/T 2289-2001 | 可曲撓橡膠接頭 | () |
| HG/T 3196-2009 | 石墨外接頭 | () |
| HG/T 3201-2009 | 石墨內接頭 | () |
| HG/T 3652-1999 | 快裝管接頭 | () |
| JB/T 10708-2007 | 膠管接頭扣壓機 | () |
| JB/T 10740.2-2007 | 額定電壓6kV(Um=7.2kV)到35kV(Um=40.5kV)擠包絕緣電力電纜 冷收縮式附件 第2部分：直通接頭 | Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)-Part 2:Straight joints |
| JB/T 1308.4-1999 | 橡膠密封真空規管接頭 | () |
| JB/T 1308.5-1999 | 發電機錫焊接頭檢測方法 | () |
| JB/T 1308.9-1999 | 照相機 快線接頭及快線座 | () |
| JB/T 1754-2008 | 閥門零部件 接頭組件 | () |
| JB/T 2636-1994(2006年確認) | 鍋爐受壓元件焊接接頭金相和斷口檢驗方法 | () |
| JB/T 3411.17-1999 | 中間接頭 尺寸 | () |
| JB/T 3411.21-1999 | 可調中心接頭 尺寸 | () |
| JB/T 3947-1999 | 電阻點焊電極接頭 | () |
| JB/T 5121-1991 | 額定電壓26/35kV 及以下電力電纜附件基本技術要求 電纜接頭 | () |
| JB/T 5227.2-1991 | 氣相色譜儀用管路附件 接頭 | () |
| JB/T 5993-1992 | 管接頭 檢測方法 | () |
| JB/T 6144.1-2007 | 錐密封膠管總成 錐接頭 | () |
| JB/T 6144.2-2007 | 錐密封膠管總成 55°非密封管螺紋錐接頭 | () |
| JB/T 6144.3-2007 | 錐密封膠管總成 55o密封管螺紋錐接頭 | () |
| JB/T 6144.4-2007 | 錐密封膠管總成 60°密封管螺紋錐接頭 | () |
| JB/T 6144.5-2007 | 錐密封膠管總成 焊接錐接頭 | () |
| JB/T 6381.1-2007 | 錐密封焊接式 直通管接頭 | () |
| JB/T 6381.2-2007 | 錐密封焊接式 直通55°非密封管螺紋管接頭 | () |
| JB/T 6381.3-2007 | 錐密封焊接式 直通55°密封管螺紋管接頭 | () |
| JB/T 6381.4-2007 | 錐密封焊接式 直通60°密封管螺紋管接頭 | () |
| JB/T 6382.1-2007 | 錐密封焊接式90o彎管接頭 | () |
| JB/T 6382.2-2007 | 錐密封焊接式55o非密封管螺紋90o彎管接頭 | () |
| JB/T 6382.3-2007 | 錐密封焊接式55o密封管螺紋90o彎管接頭 | () |
| JB/T 6382.4-2007 | 錐密封焊接式60o密封管螺紋90o彎管接頭 | () |
| JB/T 6383.1-2007 | 錐密封兩端焊接式直通管接頭 | () |
| JB/T 6383.2-2007 | 錐密封焊接式直角管接頭 | () |
| JB/T 6383.3-2007 | 錐密封焊接式三通管接頭 | () |
| JB/T 6384.1-2007 | 錐密封焊接式隔壁直角管接頭 | () |
| JB/T 6384.2-2007 | 錐密封焊接式隔壁直通管接頭 | () |
| JB/T 6385-2007 | 錐密封焊接式壓力表管接頭 | () |
| JB/T 6386-2007 | 錐密封焊接式管接頭 技術條件 | () |
| JB/T 6464-2006 | 額定電壓1kV(Um= 1.2kV)到35kV(Um = 40.5kV)擠包絕緣電力電纜繞包式直通接頭 | Taped straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV) |
| JB/T 7056-2008 | 氣動管接頭 通用技術條件 | () |
| JB/T 7057-2008 | 調速式氣動管接頭 技術條件 | () |
| JB/T 7058-1993 | 快換式氣動管接頭 技術條件 | () |
| JB/T 7339-2007 | 撓性管接頭 | () |
| JB/T 7830-2006 | 額定電壓1kV（Um=1.2kV）到10kV（Um=12kV）擠包絕緣電力電纜熱收縮式直通接頭 | Heat-shrinkable straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 7832-2006 | 額定電壓1kV（Um=1.2kV）到10kV（Um=12kV）電力電纜樹脂澆鑄式直通接頭 | Cast resin straight joints for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 7850-2007 | 手夾快換接頭 | () |
| JB/T 7940.2-1995 | 接頭式壓注油杯 | () |
| JB/T 8105.2-1999 | 金屬密封真空規管接頭 | () |
| JB/T 8302-2000 | 農業拖拉機和機具液壓輸出快換接頭 技術條件 | () |
| JB/T 8503.2-2006 | 額定電壓6kV(Um = 7.2kV)到35kV(Um = 40.5kV)擠包絕緣電力電纜預制件裝配式附件 第2部分：直通接頭 | Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) Part 2:Straight |
| JB/T 8725-1998 | 旋轉接頭 | () |
| JB/T 9162.17-1999 | 聯動夾持桿接頭 尺寸 | () |
| JB/T 9162.18-1999 | 夾持桿接頭 尺寸 | () |
| JB/T 9465-1999 | 水密接頭 | () |
| JB/T 966-2005 | 用于流體傳動和一般用途的金屬管接頭 O形圈平面密封接頭 | () |
| JB/T 978-1977 | 焊接式鉸接管接頭 | () |
| JB/T 9959-1999 | 電阻點焊 內錐度1:10的電極接頭 | () |
| JB/T 998-1977 | 焊接式鉸接管接頭體 | () |
| JB/T 999-1977 | 管接頭用鉸接螺栓 | () |
| JC 538-1994 | 石棉水泥落水管、排污管及其接頭 | () |
| JC 980-2005 | 纖維水泥電纜管及其接頭 | () |
| JC/T 1091-2008 | 預應力鋼筒混凝土管接頭用型鋼 | () |
| JJG(石油) 1-1996 | 石油鉆具接頭螺紋工作量規 | () |
| JJG(石油) 51-2000 | 石油鉆具接頭螺紋、套管圓螺紋和油管螺紋校對量規 檢定規程 | () |
| MT/T 153-1987 | 中心單鏈刮板輸送機蛙形鏈接頭 | () |
| MT/T 310-1992 | 高壓水管楔式快速接頭 | () |
| MT/T 318.1-1997 | 煤礦用輸送帶機械接頭 技術條件 | () |
| MT/T 319－2006 | 煤礦輸送帶機械接頭用帶扣 | () |
| MT/T 986-2006 | 礦用U形銷式快速接頭及附件 | () |
| QB 1504-1992 | 實驗室玻璃儀器互換錐形磨砂接頭 | () |
| QB/T 2481-2000 | 旋轉接頭技術條件 | () |
| QC/T 201-1995(2005) | 汽車氣制動用熱塑管接頭尺寸 | () |
| QC/T 228.3-1997(2005) | 摩托車和輕便摩托車操縱拉索 接頭 | () |
| QC/T 29009-1991(2005) | 汽車用電線接頭 技術條件 | () |
| QC/T 29010-1991(2005) | 汽車用低壓電線接頭型式、尺寸和技術要求 | () |
| QC/T 29011-1991(2005) | 汽車用點火線電線接頭型式、尺寸和技術要求 | () |
| QC/T 29013-1991(2005) | 汽車用蓄電池電線接頭型式、尺寸和技術要求 | () |
| QC/T 304-1999(2005) | 汽車轉向拉桿接頭總成臺架試驗方法 | () |
| QC/T 327-1999(2005) | 汽車用球頭接頭 | () |
| QC/T 399-1999(2005) | 卡套式錐螺紋直通接頭體 | () |
| QC/T 400-1999(2005) | 卡套式錐螺紋直角三通接頭體 | () |
| QC/T 401-1999(2005) | 卡套式錐螺紋直角接頭體 | () |
| QC/T 402-1999(2005) | 卡套式錐螺紋三通接頭體 | () |
| QC/T 403-1999(2005) | 擴口式錐螺紋直通管接頭體 | () |
| QC/T 404-1999(2005) | 擴口式錐螺紋直角管接頭體 | () |
| QC/T 405-1999(2005) | 擴口式錐螺紋三通管接頭體 | () |
| QC/T 669-2000(2005) | 汽車空調(HFC-134a)用管接頭和管件 | () |
| QC/T 701-2004 | 摩托車和輕便摩托車后減震器安裝接頭尺寸 | Mounting of rear shock absorbers for motorcycles and mopeds |
| QC/T 764-2006 | 汽車液壓制動系 金屬管、內外螺紋管接頭和軟管端部接頭 | () |
| SB/T 10355-2002 | 制冷系統和熱泵—軟管件、隔振器和膨脹接頭—要求、設計與安裝 | () |
| SY/T 0516-2008 | 絕緣接頭與絕緣法蘭技術規范 | () |
| SY/T 0525.2-1993 | 石油儲罐回轉接頭 | () |
| SY/T 5067-1991(2005) | 安全接頭 | () |
| SY/T 5067-2008 | 安全接頭 | () |
| SY/T 5200-2002 | 鉆柱轉換接頭 | () |
| SY/T 5290-2000 | 石油鉆桿接頭 | () |
| SY/T 5988-1994 | 油管轉換接頭 | () |
| SY/T 6669-2006 | 端蓋、聯結件和旋轉接頭規范 | Specification on end closures,connectors and swivels |
| SY/T 6715-2008 | 鋼管管接頭焊接 | () |
| 編號 | 中文名稱 | 英文名稱 |