| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI A10.33-1992 | 建筑施工和拆除工程.安全和衛生大綱.多雇員參與的工程項目的要求 | Safety and Health Program Requirements for Multi-Employer Projects |
| ANSI A10.39-1996 | 施工安全和衛生審計計劃 | Construction Safety and Health Audit Program |
| ANSI Z21.61-1983 | 燃氣的衛生間 | Toilets, Gas-Fired |
| ANSI Z4.1-1986 | 工作場所環境衛生的最低要求 | Sanitation - In Places of Employment - Minimum Requirements |
| ANSI Z4.3-1995 | 公共衛生設施.非下水道排污的廢水處理系統.最低要求 | Sanitation - Nonsewered Waste-Disposal Systems - Minimum Requirements |
| ANSI Z4.4-1988 | 野外和臨時工露營地環境衛生的最低要求 | Sanitation - In Fields and Temporary Labor Camps - Minimum Requirements |
| ANSI/3-A P3-A 002-2008 | 用于加工設備和系統材料的藥物3-Ar衛生標準 | Pharmaceutical 3-A? Sanitary/Hygienic Standards for Materials for Use in Process Equipment and Systems |
| ANSI/AAMI ST24-1999 | 衛生保健機構用一般用途的環氧乙烷自動滅菌器和環氧乙烷無菌源 | Automatic, General-Purpose Ethylene Oxide Sterilizers and Ethylene Oxide Sterilant Sources Intended for Use in Health Care Facilities |
| ANSI/AAMI ST41-2008 | 衛生保健設施中的環氧乙烷滅菌:安全和效能 | Ethylene oxide sterilization in health care facilities: Safety and effectiveness |
| ANSI/AAMI ST65-2008 | 用于衛生保健設施中可重復使用的外科紡織物的處理 | Processing of reusable surgical textiles for use in health care facilities |
| ANSI/AAMI/ISO 11135-1-2007 | 衛生保健品滅菌.環氧乙烷.第1部分:醫療設備滅菌過程開發、確認和常規控制的要求 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ANSI/AAMI/ISO 11140-3-2007 | 衛生保健品滅菌.化學指示劑.第3部分:布維-狄(Bowie和Dick)型蒸汽滲透試驗用2級指示劑系統 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicators systems for use in the Bowie and Dick steam penetration test |
| ANSI/AAMI/ISO 11140-4-2007 | 衛生保健品滅菌.化學指示劑.第4部分:蒸汽滲透檢測布維-狄(Bowie和Dick)型試驗可選2級指示劑 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration |
| ANSI/AAMI/ISO 11140-5-2007 | 衛生保健品滅菌.化學指示劑.第5部分:布維-狄(Bowie和Dick)型排氣試驗紙和試驗包用2級指示劑 | Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick air removal test sheets and packs |
| ANSI/AAMI/ISO 13408-3-2006 | 衛生保健產品的無菌工藝.第3部分:凍干法 | Aseptic Processing of health care products - Part 3: Lyophilization |
| ANSI/AAMI/ISO 15882-2008 | 衛生保健產品的消毒.化學指示劑.結果的選擇、使用和說明用指南 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results |
| ANSI/AIHA Z10-2005 | 職業衛生和安全管理系統 | Occupational Health and Safety Management Systems |
| ANSI/ASHRAE 170-2008 | 衛生保健設備用通風 | Ventilation of Health Care Facilities |
| ANSI/ASME A112.1.3-2000 | 衛生設備、器具和附件的空隙配套件 | Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances |
| ANSI/ASME A112.18.1-2007 | 衛生管道配件 | Plumbing Fixture Fittings |
| ANSI/ASME A112.18.1-2007/CSA B125.1-2007 | 衛生管道配件 | Plumbing Fixture Fittings |
| ANSI/ASME A112.18.2-2008 | 衛生設備用污水管配件 | Plumbing Waste Fittings |
| ANSI/ASME A112.3.1-2007 | 地上和地下衛生排水、排污及放氣(DWV)、雨水和真空設備用不銹鋼排水系統 | Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below-Ground |
| ANSI/ASME A112.4.14-2004 | 衛生管道系統中使用的手動直角轉彎截止閥 | Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems |
| ANSI/ASME A112.4.2-2003 | 抽水馬桶個人衛生設備 | Water Closet Personal Hygiene Devices |
| ANSI/ASME A112.6.7-2001 | 瓷漆和環氧涂覆的鑄鐵和PVC塑料衛生底板污水池 | Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks |
| ANSI/ASTM D5926-2004 | 水、廢水和排氣(DWV)、下水道、衛生設施和暴雨管道系統用聚氯乙烯墊圈的規范 | Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ANSI/ASTM D6548-2005 | 薄棉衛生紙抗機械穿透性的試驗方法(球爆裂過程) | Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ANSI/ASTM E2148-2006 | 金屬加工或金屬切削液衛生與安全相關文獻的使用指南 | Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ANSI/ASTM E2473-2006 | 電子健康記錄的職業/環境衛生的使用規程 | Practice for the Occupational/Environmental Health View of the Electronic Health Record |
| ANSI/ASTM E2553-2007 | 自動通用衛生保健識別系統實施用指南 | Guide for the Implementation of a Voluntary Universal Healthcare Identification System |
| ANSI/ASTM F2039-2000 | 船上職業衛生與健康方案基本要素指南 | Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| ANSI/ASTM F2363-2006 | 美國海岸警衛隊Ii型或Imo Marpol 73/78附錄Iv海上衛生裝置(流動通過處理)的規范 | Specification for United States Coast Guard Type Ii or Imo Marpol 73/78 Annex Iv Marine Sanitation Devices (Flow-Through Treatment) |
| ANSI/AWS D18.1-1999 | 衛生潔具用奧氏體不銹鋼管和管道的焊接規范 | Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications |
| ANSI/AWS D18.3/D 18.3M-2005 | 衛生用途的槽罐、容器和其他設備的焊接規范 | Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications |
| ANSI/BISSC Z50.2-2003 | 烘烤設備.環境衛生標準 | Bakery Equipment - Sanitation Standard |
| ANSI/HIBC 1.2-2006 | 公共衛生業條形碼(HIBC)提供者用標準 | Health Industry Bar Code (HIBC) Provider Applications Standard |
| ANSI/HL7 V2.6-2007 | 衛生保健環境中電子數據交換的健康水平7個標準版本2.5.1應用協議 | Health Level Seven Standard Version 2.5.1 An Application Protocol for Electronic Data Exchange in Healthcare Environments |
| ANSI/MEDBIQ LO.10.1-2008 | 衛生保健知識對象元數據 | Healthcare Learning Object Metadata |
| ANSI/MEDBIQ PP.10.1-2008 | 衛生保健專業簡介 | Healthcare Professional Profile |
| ANSI/NSF 24-1988 | 用于活動房屋和游樂車的衛生管道系統零件 | Plumbing System Components for Manufactured Homes and Recreational Vehicles |
| ANSI/NSF 3-A14159-1-2002 | 肉和家禽加工設備設計的衛生要求 | Hygiene Requirements for the Design of Meat and Poultry Processing Equipment |
| ANSI/NSF 3-A14159-1999 | 機械設計的衛生要求 | Hygiene Requirements for the Design of Machinery |
| ANSI/NSF 3-A14159-2-2003 | 肉類和家禽加工用手持工具設計的衛生要求 | Hygiene Requirements for the Design of Hand Held Tools Used in Meat and Poultry Processing |
| ANSI/NSF 3-A14159-3-2005 | 肉和家禽加工用機械帶式傳送機設計的衛生要求 | Hygiene Requirements for the Design of Mechanical Belt Conveyors Used in Meat and Poultry Processing (i2) |
| ASME A112.1.3-2000 | 與衛生設備、器具和附件一起使用的空隙配件 | (Air gap fittings for use with plumbing fixtures, appliances, and appurtenances) |
| ASME A112.18.1-2003 | 衛生設備配件 | (Plumbing fixture fittings) |
| ASME A112.18.3-2002 | 衛生設備配件中防逆流裝置和系統的性能要求 | (Performance requirements for backflow protection devices and systems in plumbing fixture fittings) |
| ASME A112.19.1M Supplement 1-1 | 搪瓷鑄鐵衛生設備.補充件1 | (Enameled cast iron plumbing fixtures; Supplement 1) |
| ASME A112.19.2M Supplement 1-2 | 瓷質衛生設備.補充件1 | (Vitreous China plumbing fixtures; Supplement 1) |
| ASME A112.19.2M-1998 | 瓷質衛生設備 | (Vitreous China plumbing fixtures) |
| ASME A112.19.3 Supplement 1-20 | 不銹鋼衛生設備(為住宅使用設計).補充件1 | (Stainless steel plumbing fixtures (designed for residential use); Supplement 1) |
| ASME A112.19.4M Supplement 1-1 | 搪瓷鑄鋼衛生設備.補充件1 | (Porcelain enameled formed steel plumbing fixtures; Supplement 1) |
| ASME A112.19.9M Supplement 1-2 | 未上釉陶瓷衛生設備.補充件1 | (Non-vitreous ceramic plumbing fixtures; Supplement 1) |
| ASME A112.3.1-1993 | 在地上/地下,衛生、暴雨和化工用不銹鋼排水系統的安裝程序和性能標準 | (Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground) |
| ASME A112.6.1M-1997 | 公用懸空衛生設備用地板固定的支架 | (Floor-affixed supports for off-the-floor plumbing fixtures for public use) |
| ASTM A1015-2001(2005) | 衛生潔具用管形制品的目視內孔探測檢驗的標準指南 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM C1300-1995(2007) | 用干涉法測定玻璃原料和衛生陶瓷材料線性熱膨脹的標準試驗方法 | Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method |
| ASTM C1510-2001(2007) | Abriged分光光度測量法測定衛生陶瓷顏色和色差的標準試驗方法 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM C323-1956(2006) | 衛生陶瓷粘土的化學分析的試驗方法 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| ASTM C329-1988(2006) | 焙燒衛生陶瓷材料比重的標準試驗方法 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM C370-1988(2006) | 焙燒衛生陶瓷制品受潮膨脹的標準試驗方法 | Standard Test Method for Moisture Expansion of Fired Whiteware Products |
| ASTM C372-1994(2007) | 用膨脹儀測定搪瓷及釉面焙燒制品與焙燒衛生陶瓷制品的線性熱膨脹的標準試驗方法 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
| ASTM C373-1988(2006) | 焙燒衛生陶瓷制品的吸水率、松密度、表觀多孔性與表觀比重的標準試驗方法 | Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products |
| ASTM C408-1988(2006) | 衛生陶瓷制品傳熱性的試驗方法 | Standard Test Method for Thermal Conductivity of Whiteware Ceramics |
| ASTM C424-1993(2006) | 用熱壓處理法測定焙燒衛生釉瓷抗破裂性的標準試驗方法 | Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment |
| ASTM C554-1993(2006) | 用熱沖擊法測定焙燒上釉衛生陶瓷器抗裂開的標準試驗方法 | Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method |
| ASTM C584-1981(2006) | 衛生陶瓷器具和有關制品的透光光澤度的試驗方法 | Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
| ASTM C674-1988(2006) | 衛生陶瓷材料的撓曲特性的試驗方法 | Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials |
| ASTM C848-1988(2006) | 用共振法測定衛生陶瓷的楊氏模量、切變模量和泊松比的標準試驗方法 | Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance |
| ASTM C849-1988(2006) | 衛生陶瓷努氏壓痕硬度的試驗方法 | Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares |
| ASTM C866-1977(2006) | 衛生陶瓷粘土的過濾速率的測試方法 | Standard Test Method for Filtration Rate of Ceramic Whiteware Clays |
| ASTM C867-1994(2007) | 衛生陶瓷粘土中可溶性硫酸鹽的標準試驗方法(光度法) | Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method) |
| ASTM C949-1980(2007) | 用顏料滲入法測定上釉衛生陶瓷孔穴率的標準試驗方法 | Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration |
| ASTM D5926-2004 | 排水管、排廢水和排氣管(DWV)、下水溝、衛生設施和暴雨管道系統用聚氯乙烯墊圈的標準規范 | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D6548-2000(2005) | 薄棉衛生紙抗機械穿透性的試驗方法(球爆裂過程) | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ASTM E1174-2006 | 評價衛生保健人員洗手模式效果的測試方法 | Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations |
| ASTM E1671-1995a(2005) | 辦公設備對于清潔衛生的適用性標準分類 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E1838-2002 | 利用成人自愿者試驗液體衛生洗手劑的去除病毒有效性的標準試驗方法 | Standard Test Method for Determining the Virus-Eliminating Effectiveness of Liquid Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Volunteers |
| ASTM E2148-2006 | 與金屬加工或金屬切削液衛生與安全性相關的使用文獻標準指南 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ASTM E2212-2002a | 衛生管理認證書政策的標準實施規程 | Standard Practice for Healthcare Certificate Policy |
| ASTM E2276-2003e1 | 用成人受驗者的指形墊片測定衛生洗手和擦手劑除菌效果的標準試驗方法 | Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Subjects |
| ASTM E2318-2003 | 軍事部署用環境衛生現場評估方法標準指南 | Standard Guide for Environmental Health Site Assessment Process for Military Deployments |
| ASTM E2406-2004 | 評價高效洗滌中使用的洗衣衛生消毒劑和滅菌劑的標準試驗方法 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
| ASTM E2553-2007 | 自動通用衛生保健識別系統實施的標準指南 | Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System |
| ASTM F2363-2006 | 美國海岸警衛隊II型或IMO MARPOL 73/78附件IV海上衛生設施的標準規范 | Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment) |
| UL 1431-1996 | 個人用衛生和保健設備 | (Personal hygiene and health care appliances ) |
| 編號 | 中文名稱 | 英文名稱 |