| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CR 14376-2002 | 粘合劑 紙和板、包裝材料和一次性衛生產品用粘合劑 粘合過程的描述和評估 | Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process |
| CWA 14113-1-2001 | 衛生潔具和供暖系統行業電子商務 第1部分：產品術語和分類 | Electronic commerce for the sanitaryware and heating systems industry - Part 1: Product terminology and classification |
| CWA 14113-2-2001 | 衛生潔具和供暖系統行業電子商務 第2部分：數字格式 | Electronic commerce for the sanitaryware and heating systems industry - Part 2: Digital formats |
| CWA 14113-3-2001 | 衛生潔具和供暖系統行業電子商務 第3部分：權利和規則 | Electronic commerce for the sanitaryware and heating systems industry - Part 3: Rights and rules |
| CWA 14113-4-2001 | 衛生潔具和供暖系統行業電子商務 第4部分：行業公用數據庫 | Electronic commerce for the sanitaryware and heating systems industry - Part 4: Industry common data bank |
| EN 1057-1996 | 銅和銅合金 在衛生和加熱器中輸送水和氣體用無縫圓銅管 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1111-1998 | 衛生水龍頭 溫度調節用混合閥（PN10） 一般技術規范 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| EN 1112-1997 | 衛生水龍頭用淋浴設備出口（PN10） | Shower outlets for (PN 10) sanitary tapware |
| EN 1113-1997 | 衛生水龍頭用淋浴設備軟管（PN10） | Showers hoses for (PN 10) sanitary tapware |
| EN 12041-2000 | 食品加工機械 制模機安全及衛生要求 | Food processing machinery - Moulders - Safety and hygiene requirements |
| EN 12043-2000 | 食品加工機械 對中間校準儀的安全及衛生要求 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| EN 12056-2-2000 | 建筑物內的重力排水系統 第2部分：衛生間管道工程的布局和計算 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
| EN 12077-2-1998 | 起重機安全 衛生和安全要求 第2部分：限制和指示裝置 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
| EN 12267-2003 | 食品加工機械 圓鋸床 安全和衛生要求 | Food processing machinery - Circular saw machines - Safety and hygiene requirements |
| EN 12268-2003 | 食品加工機械 帶鋸床 安全和衛生要求 | Food processing machinery - Band saw machines - Safety and hygiene requirements |
| EN 12355-2003 | 食品加工機械 去殼、去皮及除膜機 安全和衛生要求 | Food processing machinery - Derinding-, skinning-, and membrane removal machines - Safety and hygiene requirements |
| EN 12505-2000 | 食品加工機械 加工食用油和油脂的離心機 安全和衛生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 12541-2002 | 衛生間水龍頭 壓力沖洗閥和自動關閉小便池沖洗閥PN10 | Sanitary tapware - Pressure flushing valves und automatic closing urinal valves PN 10 |
| EN 12571-1998 | 與食品接觸的材料和物品 盛裝預制食品的容器的運輸裝置 熱和衛生要求和試驗 | Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing |
| EN 12574-3-2002 | 固定式廢物箱 第3部分：安全和衛生要求 | Stationary waste containers - Part 3: Safety and health requirements / Note: To be replaced by prEN 12574-3 (2003-10) (in preparation). |
| EN 12702-2000 | 紙、紙板包裝和易處置衛生品用粘合劑 潛在膠粘層的阻塞的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers |
| EN 12703-1999 | 紙、紙板、包裝和易處置衛生品用粘合劑 低溫柔韌性和冷裂開溫度的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| EN 12704-1999 | 紙、紙板、包裝和易處置衛生品用粘合劑 含水膠粘劑起泡性的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| EN 12852-2001 | 食品加工機械 食品加工機和攪拌機 安全和衛生要求 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
| EN 12853-2001 | 食品加工機械 手持式攪拌機和攪拌器 安全和衛生要求 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements |
| EN 12854-2003 | 食品加工機械 臂式攪拌器 安全和衛生要求 | Food processing machinery - Beam mixers - Safety and hygiene requirements |
| EN 12855-2003 | 食品加工機械 轉筒切割機 安全和衛生要求 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
| EN 1286-1999 | 衛生間泄水器 低壓機械混合閥 通用技術規范 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| EN 1287-1999 | 衛生間泄水器 低壓恒溫混合閥 通用技術規范 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
| EN 12935-2001 | 羽絨 衛生和清潔要求 | Feather and down - Hygiene and cleanliness requirements |
| EN 12960-2001 | 紙和紙板、包裝及一次性衛生產品用粘合劑 抗剪切力的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance |
| EN 13208-2003 | 食品加工機械 蔬菜脫皮器 安全和衛生要求 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
| EN 13289-2001 | 面食加工設備 干燥器和冷卻器 安全和衛生要求 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
| EN 13378-2001 | 面食加工機 面食壓擠 安全和衛生要求 | Pasta processing plants - Pasta presses - Safety and hygiene requirements |
| EN 13379-2001 | 面食加工機 延輾機、脫模機和切削機、搟面杖回送器、搟面杖倉 安全和衛生要求 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
| EN 13390-2002 | 食品加工機械 餡餅和烘餅機 安全和衛生要求 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| EN 13569-2001 | 盒式卷筒衛生紙 性能要求和加工 | Cabinet roller towels - Performance requirements and processing |
| EN 13732-2002 | 食品加工機械 農場批量牛奶冷卻器 結構、性能、適用性、安全性和衛生要求 | Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene |
| EN 13904-2003 | 衛生座便器用低阻力噴射排水口 | Low resistance shower outlets for sanitary tapware |
| EN 13905-2003 | 衛生座便器用低阻力噴射排水軟管 | Low resistance shower hoses for sanitary tapware |
| EN 13951-2003 | 液泵 安全要求 糧食加工設備 保證使用中的衛生保健設計規程 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
| EN 1499-1997 | 化學消毒劑和防腐劑 衛生洗手液 試驗方法和要求(第二階段第二步) | Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) |
| EN 1672-2-1997 | 食品加工機械 基本設計原理 第2部分：衛生要求 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
| EN 1673-2000 | 食品加工機械 旋轉擱架式烤爐 安全和衛生要求 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
| EN 1674-2000 | 食品加工機械 生面和面團輥軋機 安全和衛生要求 | Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements |
| EN 1678-1998 | 食品加工機械 蔬菜切削機械 安全和衛生要求 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
| EN 1719-1998 | 紙和紙板、包裝材料和一次性衛生制品用粘合劑 壓力敏感粘合劑粘著力的測定 環行粘著力的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack |
| EN 1720-1998 | 紙和紙板 包裝和一次性用衛生制品用粘合劑 分散性的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
| EN 1721-1998 | 紙和紙板、包裝材料和一次性衛生產品用粘合劑 壓敏粘合劑表面粘性的測量 滾球粘著力的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack |
| EN 1895-2001 | 紙和紙板、包裝材料和一次性衛生制品用粘合劑 撓性對撓性組裝件的180 °"T"剝離試驗 | Adhesives for paper and board, packaging and disposable sanitary products - 180°- "T" peel test for a flexible-to-flexible assembly |
| EN 1896-2001 | 紙和紙板、包裝材料和一次性衛生制品用粘合劑 抗拉伸強度和伸張度的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
| EN 1974-1998 | 食品加工機械 切片機 安全和衛生要求 | Food processing machinery - Slicing machines - Safety and hygiene requirements |
| EN 200-1989 | 衛生用水龍頭 PN10型單一和混合水龍頭（公稱尺寸1/2）通用技術規范 最小流動壓力0.05MPa（0.5bar） | Sanitary tapware - General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10; Minimum flow pressure of 0,05 MPa (0,5 bar) |
| EN 246-2003 | 衛生用水龍頭 流速調節器通用規范 | Sanitary tapware - General specifications for flow rate regulators |
| EN 248-2002 | 衛生用水龍頭 鎳鉻電鍍層通用技術規范 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| EN 255-3-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第3部分：對衛生間熱水裝置作標志的測試和要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units |
| EN 255-4-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第4部分：空間加熱裝置和衛生間熱水裝置的要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units |
| EN 274-1-2002 | 衛生器具用廢物裝置 第1部分：要求 | Waste fittings for sanitary appliances - Part 1: Requirements |
| EN 274-2-2002 | 衛生器具用廢物裝置 第2部分：試驗方法 | Waste fittings for sanitary appliances - Part 2: Test methods |
| EN 274-3-2002 | 衛生器具用廢物裝置 第3部分：質量控制 | Waste fittings for sanitary appliances - Part 3: Quality control |
| EN 300674 V 1.1.1-1997 | 電磁兼容性與無線電頻譜事宜（ERM） 道路交通與流量遠程信息處理（RTTT） 運行在5.8GHz工業、科技與醫藥 | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Technical characteristics and test methods for data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band |
| EN 453-2000 | 食品加工機械 和面機 安全和衛生要求 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN 454-2000 | 食品加工機械 行星式攪拌機 安全和衛生要求 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| EN 816-1996 | 衛生間水開關制品 自動切斷閥PN 10 | Sanitary tapware - Automatic shut-off valves PN 10 |
| EN 817-1997 | 衛生間水開關制品 機械混合器（PN10） 一般技術規范 | Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications |
| EN 840-6-1997+A1-2000 | 移動式廢料箱 第6部分：安全和衛生要求 | Mobile waste containers - Part 6: Safety and health requirements / Note: To be replaced by prEN 840-6 (2003-07). |
| EN ISO 10882-1-2001 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第1部分：空氣中粒子取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001) |
| EN ISO 10882-2-2000 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第2部分：氣體取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 14729-2001 | 眼科光學 接觸鏡片護理產品 產品的微生物要求和試驗方法及接觸鏡片衛生管理制度 | Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses (ISO 14729:2001) |
| EN ISO 15011-1-2002 | 焊接和有關工藝中的衛生和安全 電弧焊產生的煙塵和氣體取樣的實驗室方法 第1部分：顆粒煙塵分析取樣和產 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume (ISO 15011-1:2002) |
| prEN 12042-2000 | 食品加工機械 對自動分配機的安全及衛生要求 | Food processing machinery - Automatic dividers - Safety and hygiene requirements |
| prEN 12054-2001 | 化學消毒劑和防腐劑 衛生和外科用擦手和洗手用品的殺菌效果評價用定量懸浮液試驗 試驗方法和要求（第二階 | Chemical desinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of products for hygienic and surgical handrub and handwash used in human medicine - Test method and requirements (phase 2/step 1) |
| prEN 1219-1993 | 衛生用具 抗瓷釉表面磨損的測定 | Sanitary appliances; determination of the resistance of enamelled (glazed) surfaces to abrasion |
| prEN 1220-1993 | 塑料材料的衛生用具 沖擊性試驗 | Sanitary appliances of plastic materials; impact test |
| prEN 1221-1993 | 衛生用具 抗香煙燃燒性的測定 | Sanitary appliances; determination of the resistance to cigarette burns |
| prEN 1222-1993 | 衛生用具 抗刮傷性的測定 | Sanitary appliances; determination of the resistance to scratching |
| prEN 1223-1993 | 衛生用具 抗裂紋性的測定 | Sanitary appliances; determination of the resistance to crazing |
| prEN 1224-1993 | 衛生用具 抗吸水性的測定 | Sanitary appliances; determination of water absorption |
| prEN 12331-2003 | 食品加工機械 切碎機 安全和衛生要求 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| prEN 12463-1996 | 食品處理機械 填充機和輔助機械 安全和衛生要求 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| prEN 12764-1997 | 衛生潔具 渦流浴盆規范 | Sanitary appliances - Specification for whirlpool baths |
| prEN 128-1989 | 衛生器具的性能準則和要求 | Performance criteria and requirements for sanitary appliances |
| prEN 12851-1997 | 食品加工機械 配備輔助驅動轂的機器給養裝置 安全和衛生要求 | Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
| prEN 12984-1997 | 食品加工機械 便攜式和/或手動機械及配備機械驅動切削工具的設備 安全和衛生要求 | Food processing machinery - Portable and/or hand-operated machines and appliances equipped with mechanically driven cutting tools - Safety and hygiene requirements |
| prEN 13151-1998 | 衛生潔具 術語 | Sanitary appliances - Terminology |
| prEN 13288-1998 | 食品加工機械 筒升降和傾卸機械 安全和衛生要求 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| prEN 13389-1998 | 食品加工機械 帶水平軸的攪拌機 安全和衛生要求 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
| prEN 13534-1999 | 食品加工機械 烘焙注入機 安全和衛生要求 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| prEN 13570-1999 | 食品加工機械 攪拌器和攪拌機械 安全和衛生要求 | Food processing machinery - Mixers and mixing machines - Safety and hygiene requirements |
| prEN 13591-1999 | 食品加工機械 固定臺式爐加料機 安全和衛生要求 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| prEN 13621-1999 | 食品加工機械 色拉烘干器 安全和衛生要求 | Food processing machinery - Salad dryers - Safety and hygiene requirements |
| prEN 13870-2000 | 食品加工機械 切碎機 安全和衛生要求 | Food processing machinery - Chop cutting machines - Safety and hygiene requirements |
| prEN 13871-2000 | 食品加工機械 切塊機 安全和衛生要求 | Food processing machinery - Cubes cutting machines - Safety and hygiene requirements |
| prEN 13885-2000 | 食品加工機械 切棒機 安全和衛生要求 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| prEN 13886-2000 | 食品加工機械 配備攪拌器和/或混合器的烹調鍋 安全和衛生要求 | Food processing machinery - Cooking kettles equipped with stirrer and/or mixer - Safety and hygiene requirements |
| prEN 13954-2000 | 食品加工機械 面包切片機 衛生和安全要求 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| prEN 14041-2000 | 彈性的、紡織的和層壓材料地毯 衛生、安全和節能的技術要求 | Resilient, textile and laminate floor coverings - Health, safety and energy-saving requirements |
| prEN 200-2002 | 衛生用水龍頭 單一和混合水龍頭（PN10） 通用技術規范 | Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification |
| prEN 255-6-1992 | 熱力泵 用于加熱或加熱和制冷的帶電驅動壓縮機熱力泵組 第6部分：用于加熱衛生間熱水的熱力泵組 測試、 | Heat pumps; heat pump units with electrically driven compressors used for heating or for heating and cooling; part 6: heat pump units for heating sanitary water; testing, definitions and requirements for marking |
| prEN 255-7-1992 | 熱力泵 帶電驅動壓縮機的熱力泵組 第7部分：用于加熱衛生間熱水的熱力泵組和熱力泵 空中噪音的測量 噪 | Heat pumps; heat pump units with electrically driven compressors; part 7: heat pump units and heat pumps for heating sanitary water; measurements of airborne noise; determination of the sound power level |
| prEN 255-8-1992 | 熱力泵 帶電驅動壓縮機的熱力泵組 第8部分：用于加 熱衛生間熱水的熱力泵組和熱力泵 要求 | Heat pumps; heat pump units with electrically driven compressors; part 8: heat pump units and heat pumps for heating sanitary water; requirements |
| prEN 840-6-2003 | 移動式廢料箱 第6部分：安全和衛生要求 | Mobile waste containers - Part 6: Safety and health requirements / Note: Intended as replacement for EN 840-6 (1997-01). |
| prEN ISO 16408-2003 | 牙科學 口腔衛生用品 口腔清洗 | Dentistry - Oral hygiene products - Oral rinses (ISO/DIS 16408:2003) |
| 編號 | 中文名稱 | 英文名稱 |