| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 11024-1973 | 彈簧銷 | Spring Cotters |
| DIN 15112-1979 | 彈簧拉力.安全要求和檢驗 | Spring pulls; safety requirements, testing |
| DIN 1571-1979 | 彈簧頁扇的中央凹痕 | Central Dimples for Spring Leaves |
| DIN 18262-1969 | 防火門用可調節非承重彈簧鉸鏈 | Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors |
| DIN 18263-1-1997 | 建筑五金.受控門鎖.第1部分:用曲軸傳動和螺旋彈簧的門鎖 | Building hardware - Controlled door closing devices with hydraulic damping - Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer) |
| DIN 18264-1978 | 建筑五金.單動門用彈簧門樞 | Building hardware; spring hinges for doors, single action |
| DIN 18265-1978 | 建筑五金.雙動門用彈簧門樞 | Building hardware; spring hinges for doors, double action |
| DIN 18267 Berichtigung 1-2005 | 窗把手.彈簧鎖和可鎖窗把手.DIN 18267-2005的勘誤 | Window handles - Clickable and lockable window handles, Corrigenda to DIN 18267:2005-01 |
| DIN 18267-2005 | 窗把手.彈簧鎖和可鎖窗把手 | Window handles - Clickable and lockable window handles |
| DIN 20553-1989 | 礦山車用帶錐形滾柱軸承的車輪裝置.不帶彈簧 | Wheel sets with taper roller bearings for mine cars; without springs |
| DIN 20555-1989 | 礦山車用帶錐形滾柱軸承的車輪裝置.外部彈簧懸掛裝置 | Wheel sets with taper roller bearings for mine cars; exterior spring suspension |
| DIN 20556-1989 | 礦山車用帶錐形滾柱軸承的車輪裝置.內部彈簧懸掛裝置 | Wheel sets with taper roller bearings for mine cars; interior spring suspension |
| DIN 20579-1-1986 | 礦車用緩沖彈簧.第1部分:計算 | Buffer springs for mine cars; calculation |
| DIN 20579-2-1986 | 礦車用緩沖彈簧.第2部分:要求 | Buffer springs for mine cars; requirements |
| DIN 2090-1971 | 扁鋼制螺旋壓縮彈簧.計算 | Helical Compression Springs made of Flat Bar Steel; Calculation |
| DIN 2091-1981 | 圓截面扭桿彈簧.計算與設計 | Circular section torsion bar springs; Calculation and design |
| DIN 2092 Berichtigung 1-2007 | 盤形彈簧.DIN 2092-2006-03的計算、技術勘誤 | Disc springs - Calculation, Corrigenda to DIN 2092:2006-03 |
| DIN 2092-2006 | 盤形彈簧.計算 | Disc springs - Calculation |
| DIN 2093 Berichtigung 1-2007 | 盤形彈簧.質量規范.尺寸.DIN 2093:2006-03的勘誤 | Disc springs - Quality specifications - Dimensions, Corrigenda to DIN 2093:2006-03 |
| DIN 2093-2006 | 盤形彈簧.質量規范.尺寸 | Disc springs - Quality specifications - Dimensions |
| DIN 2095-1973 | 圓線材制圓柱形螺旋彈簧.冷繞制壓縮彈簧的質量規范 | Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Compression Springs |
| DIN 2096-1-1981 | 圓線材及棒材制圓柱形螺旋壓縮彈簧.熱繞壓縮彈簧的質量要求 | Helical compression springs made of round wire and rod; Quality requirements for hot formed compression springs |
| DIN 2097-1973 | 圓線材制圓柱形螺旋彈簧.冷繞制拉伸彈簧的質量規范 | Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs |
| DIN 2098-1-1968 | 圓線材制螺旋彈簧.線材直徑0.5MM以上的冷卷壓力彈簧的尺寸 | Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards |
| DIN 2098-2-1970 | 圓線材制螺旋彈簧.線材直徑0.5MM以下的冷卷壓力彈簧的尺寸 | Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter |
| DIN 2099-1-2003 | 圓絲材和棒材制螺旋式彈簧.第1部分:冷成形壓縮彈簧所需的信息.打印表格A | Helical springs made of round wire and rod - Part 1: Information to be given in order to obtain the cold formed compression spring required; Printed form A |
| DIN 2099-2-2004 | 圓線材和棒材制螺旋彈簧.第2部分:獲取所需的冷成型拉伸彈簧而給出的信息.印制格式B | Helical springs made of round wire and rod - Part 2: Information to be given in order to obtain the cold formed tension springs required, printed form B |
| DIN 2099-3-2004 | 圓線材及棒材制螺旋彈簧.第3部分:熱成形壓縮彈簧要求的信息.印樣C | Helical springs made of round wire and rod - Part 3: Information to be given in order to obtain the hot formed compression spring required, printed form C |
| DIN 2194-2002 | 圓線和圓條制螺旋彈簧.冷纏扭力彈簧(蝶形彈簧).質量規范 | Helical springs made of round wire and rod - Cold coiled torsional springs (leg springs) - Quality specifications |
| DIN 267-26-2005 | 緊固件.技術規范.第26部分:螺栓連接件用錐形彈簧墊圈 | Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections |
| DIN 27204-4-2005 | 鐵路車輛的性能.行走機構.第4部分:鋼制彈簧 | State of railway vehicles - Running gear - Part 4: Steel springing |
| DIN 27204-6-2004 | 鐵路車輛的安全.行走機構.第6部分:氣體彈簧懸掛系統 | State of railway vehicles - Running gear - Part 6: Pneumatic suspension system |
| DIN 3019-1972 | 工業貨車.推車和拖車車軸用梯形板彈簧 | Industrial trucks; trapezoidblock-springs for axles of handcarts and trailers |
| DIN 3021-1-1999 | 軟管夾件.彈簧板夾件(FBS).第1部分:尺寸、標記、材料和類型 | Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types |
| DIN 3021-2-1999 | 軟管夾子.彈簧帶夾子.第2部分:交貨技術條件 | Hose clamps - Spring band clamp - Part 2: Technical delivery conditions |
| DIN 3021-3-1999 | 軟管夾子.彈簧帶夾子.第3部分:系統: 彈簧帶夾子-軟管-插口 | Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot |
| DIN 31216-2-1980 | 彈簧夾.單個零件和板 | Spring clamps; individual parts and plates |
| DIN 34016-1980 | 疊層彈簧.彈簧懸掛的彈簧連接墊圈支承板 | Laminated springs; spring link washer bearing plates for spring suspension |
| DIN 34818-2002 | 帶攻絲螺紋的薄彈簧螺母 | Sheet spring nuts with tappping screw thread |
| DIN 37082-1975 | 制動踢片的調節裝置.彈簧螺栓的壓力彈簧. | Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
| DIN 4000-11-1987 | 彈簧貸品特性的表格設計 | Tabular layouts of article characteristics for springs |
| DIN 4000-93-2006 | 產品特性表.第93部分:彈簧夾頭、夾緊套管和單頭卡套 | Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules |
| DIN 41079-1974 | 電輔助時鐘裝置的發條機構和刻度盤的緊固.安裝尺寸 | Fastening of clockworks an dials for electric secundary clocks; mounting dimensions |
| DIN 42013-1988 | 小型電動機的球軸承軸向調節用彈簧墊圈 | Spring washers for axial adjustment of ball bearings of small motors |
| DIN 43801-1-1976 | 電氣測量?jī)x器.第1部分:螺旋彈簧.尺寸 | Electrical measuring instruments; spiral springs; dimensions |
| DIN 4621-1995 | 疊板彈簧.校直彈簧夾 | Laminated leaf springs - Alignment clips |
| DIN 46238-1985 | 塑料絕緣通信軟線的彈簧電纜終端 | Springterminals for plastic insulated telecommunication cords |
| DIN 46336-1987 | 彈簧接線端的插頭盒 | Plugbox for springterminals |
| DIN 49999-2-1983 | 玻璃燈具.螺紋環和彈簧緊固用圓形孔的棱邊.連接尺寸 | Glass luminaires; round hole edges for threaded ring and spring fastening; connection dimensions |
| DIN 5287-1972 | 單件制單鉤彈簧鉤 | Simplex hook spring hooks made of one piece |
| DIN 5289-1979 | 剪刀形彈簧保險鉤 | Scissors snap |
| DIN 5290-1-1983 | 有鎖緊螺母的輕金屬?gòu)椈摄^.尺寸、要求、檢驗 | Snap hook from light metal; with setting nut; dimensions, requirements and testing |
| DIN 5290-2-1977 | 無定位螺母的輕金屬?gòu)椈晒?第2部分:尺寸、交貨技術條件 | Light metal spring hook without setting nut; dimensions, technical conditions of delivery |
| DIN 5297-1-1979 | 第1部分:帶固定矩形環的彈簧按扣 | Spring snap with fixed square eye |
| DIN 5297-2-1979 | 帶固定圓環和橢圓環的彈簧鎖鉤 | Spring snap with fixed round eye and oval eye |
| DIN 5299-1980 | 半圓鋼絲、圓鋼絲及鍛造的彈簧保險鉤 | Snap hook half-round wire, round wire and forged |
| DIN 5543-1980 | 疊層彈簧.彈簧懸掛的彈簧連接墊圈和中間彈簧連接墊圈 | Laminated springs; spring link washers and intermediate spring link washers for spring suspension |
| DIN 58507-1994 | 精密繪圖儀的彈簧弓式插腳圓規 | Spring bow compass with interchangeable points for precision drawing instruments (P) |
| DIN 58508-1994 | 精密繪圖儀的彈簧弓式兩腳規(P) | Spring-bow divider for precision drawing instruments (P) |
| DIN 58509-1994 | 精密繪圖儀用帶互換筆尖的圓心固定式彈簧圓規 | Fixed centre spring bow with interchangeable points for precision drawing instruments (P) |
| DIN 58516-1990 | 固定中心彈簧圓規的樞針 | Pivot needles for fixed center spring bow |
| DIN 58543-1987 | 學生用繪圖儀器的彈簧分度規 | Spring bow divider for school drawing instruments |
| DIN 58544-1996 | 標準繪圖儀定心彈簧圓規 | Drop bow for standard drawing instruments |
| DIN 58556-1987 | 帶可互換零件的快速調整彈簧圓規鉛筆和快速調整彈簧圓規組合件 | Quick setting bow pencil and quick setting bow combination with interchangeable parts |
| DIN 6310-2002 | 夾具用彈簧承載掣子 | Spring-loaded catch for jigs |
| DIN 6343-1993 | 固定長度的彈簧套夾 | Collets-dead length type |
| DIN 6796-1987 | 螺栓和螺母用螺旋彈簧墊圈 | Conical spring washers for bolt/nut assemblies |
| DIN 6900-5-2004 | 粗牙螺紋螺釘和墊圈組件.第5部分:帶錐形彈簧墊圈 | Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer |
| DIN 6908-1995 | 螺釘和墊圈組件用錐形彈簧墊圈 | Conical spring washers for screw and washer assemblies |
| DIN 69882-6-2005 | 符合DIN 69893-1的帶錐形空心柄的刀具夾具.第6部分:E型帶8度安裝角的彈簧夾頭.尺寸 | Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions |
| DIN 71805-1990 | 角形鉸鏈.球形承窩.開口彈簧卡環 | Angle joints; housings, circlips |
| DIN 81307-2003 | 船上折疊門帶鎖閂彈簧鎖 | Rim-locks with latch-bolt for hinged doors on ships |
| DIN 81308-2003 | 船上折疊門無彈簧閂彈簧鎖 | Rim-locks without latch-bolt for hinged doors on ships |
| DIN 81309-2003 | 船上廁所和浴室折疊門帶彈簧閂的彈簧鎖 | Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships |
| DIN 81310-2003 | 船上推拉門帶鉤頭彈簧閂的彈簧鎖 | Rim-locks with hook latch-bolt for sliding doors on ships |
| DIN 81311-2005 | 船用重型鉸鏈門的帶碰簧銷的彈簧鎖 | Rim-locks with latch-bolt for heavy hinged doors on ships |
| DIN 81312-1987 | 重型鉸鏈門用無簧鎖的門緣彈簧鎖 | Rim-locks without latch-bolt for heavy hinged doors |
| DIN 81409-1977 | 活板門用彈簧式定位器 | Spring type holders for trap-doors |
| DIN 8260-1987 | 手表的調節軸(發條軸).主要尺寸 | Setting stem (winding stem) for watches; main dimensions |
| DIN 8297-1971 | 手表的發條柄 | Winding buttons for wrist-watches |
| DIN 8328-3-1984 | 鐘表的編號.電源、發條機構、擺振系統、保護措施和附加功能 | Numbering of watches and clocks; energy supply, winding mechanism, oscillating system, protective measures and additional functions |
| DIN 95361-1997 | 彈簧元件.條材 | Elastomer mounts - Bars |
| DIN 95362-1996 | 空心棱柱彈簧組件 | Elastomer mounts, hollow-prismatic |
| DIN 95365-1997 | 彈簧元件.槽軸承.A至K型 | Elastomer mounts - Hat mounts - Types A to K |
| DIN 95366-1996 | 橡膠-彈簧元件.帶和不帶保險的罐形軸承.A型至G型 | Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G |
| DIN 95408-1999 | 彈簧元件.頂鍛卡箍彈簧元件.J型 | Spring mounts - Trust stirrup mounts - Type J |
| DIN 9814-1981 | 彈簧沖空模板的中間立柱式?jīng)_壓機 | Centre post press tool sets with spring stripper |
| DIN 9835-1 Bb.1-1987 | 沖壓模具用彈性體壓力彈簧.彈簧特性 | Elastomer pressure springs for press tools; spring characteristics |
| DIN 9835-3-1984 | 沖壓模具用彈性體壓力彈簧.檢驗和要求 | Elastomer pressure springs for press tools; testing and requirements |
| DIN EN 10089-2003 | 淬火和回火彈簧用熱軋鋼材.交貨技術條件 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| DIN EN 10092-1-2004 | 熱軋彈簧扁鋼棒材.第1部分:扁平棒材.尺寸及形狀和尺寸公差 | Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003 |
| DIN EN 10092-2-2004 | 熱軋彈簧鋼扁平棒材.第2部分:有肋和有槽的簧片.尺寸及形狀和尺寸公差 | Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves, Dimensions and tolerances on shape and dimensions; German version EN 10092-2:2003 |
| DIN EN 10132-4-2003 | 熱處理用冷軋鋼窄帶材.交貨技術條件.第4部分:彈簧鋼和其它用途鋼 | Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications; German version EN 10132-4:2000 + AC:2002 |
| DIN EN 10151-2003 | 不銹鋼彈簧帶材.交貨技術條件 | Stainless steel strip for springs - Technical delivery conditions; German version EN 10151:2002 |
| DIN EN 10270-1-2001 | 機械彈簧鋼絲.第1部分:鉛淬火冷拉制非合金鋼絲 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire; German version EN 10270-1:2001 |
| DIN EN 10270-2-2001 | 機械彈簧鋼絲.第2部分:油淬火和回火彈簧鋼絲 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire; German version EN 10270-2:2001 |
| DIN EN 10270-3-2001 | 機械彈簧鋼絲.第3部分:不銹鋼彈簧鋼絲 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire; German version EN 10270-3:2001 |
| DIN EN 12384-1999 | 銅和銅合金.帶材彈簧彎曲極限的測定 | Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999 |
| DIN EN 13298-2003 | 鐵路設施.懸掛零部件.螺旋鋼制懸掛彈簧 | Railway applications - Suspension components - Helical suspension springs, steel; German version EN 13298:2003 |
| DIN EN 13906-1-2002 | 圓形金屬絲和棒材制柱形螺旋彈簧.計算和設計.第1部分:壓縮彈簧; 德文版本 EN 13906-1:2002 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs; German version EN 13906-1:2002 |
| DIN EN 13906-2-2002 | 圓形金屬絲和棒材制柱形螺旋彈簧.計算和設計.第2部分:拉伸彈簧; 德文版本 EN 13906-2:2001 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs; German version EN 13906-2:2001 |
| DIN EN 13906-3-2002 | 圓形金屬絲和棒材制柱形螺旋彈簧.計算和設計.第3部分:扭矩彈簧; 德文版本 EN 13906-3:2001 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs; German version EN 13906-3:2001 |
| DIN EN 14200-2004 | 鐵路設施.懸掛組件.鋼制拋物線形彈簧 | Railway applications - Suspension components - Parabolic springs, steel; German version EN 14200:2004 |
| DIN EN 14817-2006 | 鐵路設施.懸架元部件.空氣彈簧控制元素 | Railway applications - Suspension components - Air spring control elements English version of DIN EN 14817:2006-08 |
| DIN EN 1654-1998 | 銅和銅合金.彈簧和連接器用帶材 | Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997 |
| DIN EN 2591-413-1998 | 航空航天系列.電氣和光學儀器連接元件.試驗方法.第413部分:彈簧接地系統的保持力 | Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998 |
| DIN EN 4166-2006 | 航空航天系列.三部分彈簧張力夾具.聚四氟乙烯軸襯 | Aerospace series - Clips, spring tension, three parts - PTFE bushes; German and English version EN 4166:2004 |
| DIN EN 4167-2006 | 航空航天系列.三部分彈簧張力夾具.耐熱鋼FE-PA2601(A286)制內夾具 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4167:2004 |
| DIN EN 4168-2006 | 航空航天系列.三部分彈簧張力夾具.耐熱鋼FE-PA2601(A286)制外夾具 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4168:2004 |
| DIN EN 4420-2004 | 航空航天系列.合金鋼FE-PA3903制有彈簧張力的卡箍 | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003 |
| DIN EN 4585-2004 | 航空航天系列.彈簧拉伸卡箍.技術規范 | Aerospace series - Clips, spring tension - Technical specification; German and English version EN 4585:2003 |
| DIN EN 60352-7-2003 | 無焊連接.第7部分:彈簧夾連接件.一般要求、試驗方法和使用指南 | Solderless connections - Part 7: Spring clamp connections; General requirements, test methods and practical guidance (IEC 60352-7:2002); German version EN 60352-7:2002 |
| DIN EN 61076-2-101-2006 | 電子設備連接器.第2-101部分:圓形連接器.低壓設備用帶螺釘或彈簧鎖緊的M8圓形連接器、帶螺釘鎖緊的M12圓形 | Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006 |
| DIN EN ISO 10427-1-2003 | 石油天然氣工業.套管扶正器.第1部分:弓形彈簧式套管扶正器 | Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001 |
| DIN EN ISO 7500-1 Bb.2-1999 | 金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.彈簧試驗機的要求、驗 | Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines |
| DIN EN ISO 8748-2007 | 彈簧型直銷.卷制重型(ISO 8748-2007) | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007 |
| DIN EN ISO 8750-2007 | 彈簧型直銷.卷制標準型(ISO 8750-2007) | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007 |
| DIN EN ISO 8751-2007 | 彈簧型直銷.卷制輕型(ISO 8751-2007) | Spring-type straight pins - Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007 |
| DIN EN ISO 8752-1998 | 彈簧式直銷.開槽重型 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
| DIN ISO 10069-1-2000 | 沖壓工具.彈性體壓縮彈簧.第1部分:總規范 | Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:1991) |
| DIN ISO 10069-2-2000 | 壓力工具.彈性體壓縮彈簧.第2部分:附件規范 | Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
| DIN ISO 10243-1993 | 沖壓工具.矩形截面的壓力彈簧.安裝座的尺寸和顏色代碼 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991 |
| DIN ISO 11901-1-2005 | 沖壓工具.氣壓彈簧.第1部分:一般規范 | Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:2003) |
| DIN ISO 11901-2-2005 | 沖壓工具.氣壓彈簧.第2部分:附件規范 | Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO 11901-2:2004) |
| DIN ISO 2162-1-1994 | 技術產品文獻.彈簧.第1部分:簡要說明 | Technical products documentation - Springs - Part 1: Simplified representation; identical with ISO 2162-1:1993 |
| DIN ISO 2162-2-1994 | 技術產品文獻.彈簧.第2部分:圓柱形螺旋壓力彈簧的說明 | Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs; identical with ISO 2162-2:1993 |
| DIN ISO 366-3-1990 | 紡織機械和附件.鋼筘.第3部分:具有雙彈簧的搖動桿金屬筘.尺寸和標識; 等同采用 ISO 366-3:1988 | Textile machinery and accessories; reeds; metal reeds with double-spring baulk; dimensions and designation; identical with ISO 366-3:1988 |
| DIN ISO 6626-1990 | 內燃機.活塞環.螺旋彈簧承載油控制環 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings; identical with ISO 6626:1989 |
| DIN ISO 93-2-2006 | 紡織機械和附件.圓筒形條筒.第2部分:彈簧底(ISO 93-2:1998) | Textile machinery and accessories - Cylindrical sliver cans - Part 2: Spring bottoms (ISO 93-2:2006) English version of DIN ISO 93-2:2006-09 |
| DIN V 4001-302 Bb.1-1993 | CAD標準零件庫.幾何形狀和參數的規范.帶齒的、波汶狀的、和錐形彈簧墊圈 | CAD standard parts library; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers |
| DIN V 4001-302-1993 | CAD標準件文件.幾何形狀和參數規范.帶齒的、波汶狀的、和錐形彈簧墊圈 | CAD standard parts file; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers |
| DIN V 65900-19-2001 | 航空航天.彈簧拉力夾.設計推薦規范 | Aerospace series - Clips, spring tension - Design recommandations (AECMA Technical Report TR 4586:2000) |
| DIN V 65900-20-2001 | 航空航天.彈簧拉力夾.裝配推薦規范 | Aerospace series - Clips, spring tension - Assembly recommandations (AECMA Technical Report TR 4587:2000) |
| DIN V 65900-8-1995 | 航空航天系列.彈簧張力式三節管夾.總裝建議 (AECMA 技術報告 TR 4169:1995) | Aerospace series - Clips, spring tension, three parts - Assembly recommendations (AECMA Technical Report TR 4169:1995) |
| 編號 | 中文名稱 | 英文名稱 |