| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60352-7-2003 | 無焊連接.第7部分:彈簧夾件連接.一般要求、試驗方法和實施指南 | Solderless connections - Part 7: Spring clamp connections; General requirements, test methods and practical guidance |
| IEC/PAS 61076-3-116-2005 | 電子設備用連接器.第3-116部分:矩形連接器.與IEC 60603-7系列接口結合的工業環境用最高頻率為600Hz的8頻道 | Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp |
| ISO 10069-1-1991 | 沖壓工具 彈性體壓縮彈簧 第1部分:一般規范 | Tools for pressing; elastomer pressure springs; part 1: general specification |
| ISO 10069-2-1991 | 沖壓工具 彈性體壓縮彈簧 第2部分:附件規范 | Tools for pressing; elastomer pressure springs; part 2: specification of accessories |
| ISO 10243-1991 | 沖壓工具 矩形截面壓縮彈簧 安裝尺寸和顏色標志 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding |
| ISO 10427-1-2001 | 石油和天然氣工業 套管扶正器 第1部分：弓性彈簧套管扶正器 | Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers |
| ISO 11901-1-2003 | 沖壓工具.氣壓彈簧.第1部分:一般規范 | Tools for pressing - Gas springs - Part 1: General specifications |
| ISO 11901-2-2004 | 沖壓工具.氣壓彈簧.第2部分:附件規范 | Tools for pressing - Gas springs - Part 2: Specification of accessories |
| ISO 14856-2001 | 計時儀器 手表殼 無發條型的安裝尺寸 | Timekeeping instruments - Wristwatch-cases - Fixing dimensions of non-spring-bar types |
| ISO 2162-1-1993 | 技術產品文件 彈簧 第1部分:簡化表示法 | Technical product documentation; springs; part 1: simplified representation |
| ISO 2162-2-1993 | 技術產品文件 彈簧 第2部分:圓柱螺旋彈簧的數據表示 | Technical product documentation; springs; part 2: presentation of data for cylindrical helical compression springs |
| ISO 2162-3-1993 | 技術產品文獻.彈簧.第3部分:詞匯 | Technical product documentation; springs; part 3: vocabulary |
| ISO 683-14-2004 | 熱處理鋼、合金鋼和易切鋼.第14部分:淬火回火彈簧用熱軋鋼 | Heat-treatable steels, alloy steels and free-cutting steels - Part 14: Hot-rolled steels for quenched and tempered springs |
| ISO 6931-1-1994 | 彈簧不銹鋼 第1部分:鋼絲 | Stainless steels for springs - Part 1: Wire |
| ISO 6931-2-2005 | 彈簧不銹鋼.第2部分:窄形帶材 | Stainless steels for springs - Part 2: Narrow strip |
| ISO 7072-1993 | 農林用拖拉機和機械 車軸銷和彈簧銷 尺寸和要求 | Tractors and machinery for agriculture and forestry; linch pins and spring pins; dimensions and requirements |
| ISO 8458-1-2002 | 機械彈簧用鋼絲.第1部分:一般要求 | Steel wire for mechanical springs - Part 1: General requirements |
| ISO 8458-2-2002 | 機械彈簧用鋼絲.第2部分:鉛淬冷拔非合金鋼絲 | Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire |
| ISO 8458-3-2002 | 機械彈簧用鋼絲.第3部分:油淬火和回火鋼絲 | Steel wire for mechanical springs - Part 3: Oil-hardened and tempered wire |
| ISO 93-2-2006 | 紡織機械和附件.圓柱形條筒.第2部分:彈簧底 | Textile machinery and accessories - Cylindrical sliver cans - Part 2: Spring bottoms |
| ISO 9442-1988 | 鋼 制彈簧片用熱軋筋及帶槽的扁鋼 公差及尺寸 | Steel; hot-rolled ribbed and grooved flats for spring leaves; tolerances and dimensions |
| 編號 | 中文名稱 | 英文名稱 |