| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI Z21.13-2004 | 燃?xì)獾蛪赫羝仩t和熱水鍋爐 | Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9) |
| ANSI Z21.13b-2007 | 燃?xì)獾蛪赫羝仩t和熱水鍋爐 | Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9b) |
| ANSI/AAMI ST79-2006 | 醫療設備中蒸汽消毒和滅菌保證用綜合指南 | Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
| ANSI/AAMI ST8-2001 | 醫院蒸汽滅菌器 | Hospital Steam Sterilizers |
| ANSI/AAMI/ISO 11140-3-2007 | 衛生保健品滅菌.化學指示劑.第3部分:布維-狄(Bowie和Dick)型蒸汽滲透試驗用2級指示劑系統 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicators systems for use in the Bowie and Dick steam penetration test |
| ANSI/AAMI/ISO 11140-4-2007 | 衛生保健品滅菌.化學指示劑.第4部分:蒸汽滲透檢測布維-狄(Bowie和Dick)型試驗可選2級指示劑 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration |
| ANSI/API 612(ISO 10437-2003)-2005 | 石油、石化和天然氣工業.蒸汽渦輪.專用設施 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/API 612-2005 | 石油、石化和天然氣行業-蒸汽渦輪－專用 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/ASME PTC12.2-1998 | 性能測試規程.蒸汽冷凝裝置 | Performance Test Code on Steam Surface Condensers |
| ANSI/ASME PTC19.11-1997 | 動力循環中水和蒸汽的取樣、調節和分析 | Steam and Water Sampling, Conditioning and Analysis in the Power Cycle |
| ANSI/ASME PTC30.1-2007 | 空氣制冷蒸汽冷凝器 | Air Cooled Steam Condensers |
| ANSI/ASME PTC4-1998 | 性能試驗規程.蒸汽發生裝置 | Performance Test Code - Steam Generating Units (includes ASME 1968 and 1969 addenda) |
| ANSI/ASME PTC4.4-1981 | 燃?xì)廨啓C熱回收蒸汽發電機 | Gas Turbine Heat Recovery Steam Generators |
| ANSI/ASME PTC6.2-2004 | 聯合循環蒸汽渦輪機 | Steam Turbines in Combined Cycles |
| ANSI/ASME TDP-1-2006 | 發電用蒸汽輪機防水損壞的推薦實施規程 | Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation |
| ANSI/ASTM D4079-2000 | 蒸汽去油脂等級甲基規范 | Specification for Vapor-Degrasing Grade Methylene |
| ANSI/ASTM D4126-2000 | 蒸汽去油脂等級和通用溶劑等級1,1,1-三氯乙烷規范 | Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
| ANSI/ASTM D4248-1999 | 蒸汽渦輪發電機油路系統設計(05.02) | Design of Steam Turbine Generator Oil Systems (05.02) |
| ANSI/ASTM D4376-1998 | 蒸汽脫脂級四氯乙烯規范 | Specification for Vapor-Degreasing Grade Perchloroethylene |
| ANSI/ASTM D4378-2003 | 蒸汽和燃?xì)廨啓C礦物油在運行中的監測 | In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02) |
| ANSI/ASTM D4953-2006 | 汽油和汽油氧化混合物的蒸汽壓力試驗方法(烘干法) | Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
| ANSI/ASTM D5305-1997 | 液化石油氣蒸汽中乙硫醇的測定用試驗方法 | Test Method for the Determination of Ethyl Mercaptan in LP-Gas Vapor |
| ANSI/ASTM D6368-2000 | 蒸汽脫脂等級和普通溶劑丙基溴化物規范 | Specification for Vapor-Degreasing Grade and General Solvent Grave Normal-Propyl Bromide |
| ANSI/ASTM D6439-2005 | 蒸汽、氣體和水電渦輪潤滑系統的清潔、沖洗和純化指南 | Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
| ANSI/ASTM F1369-1993 | 熱水蒸汽對流加熱器規范 | Specification for Heaters, Convection, Steam and Hot Water |
| ANSI/ASTM F1508-1997 | 用于蒸汽、氣體和液體設備的角型減壓閥規范 | Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ANSI/ASTM F1565-2000 | 蒸汽供應減壓閥規范 | Specification for Pressure-Reducing Valves for Steam Service |
| ANSI/ASTM F1785-1997 | 蒸汽壺性能試驗方法 | Test Method for Performance of Steam Kettles |
| ANSI/EIA-364-53B-2000 | 電連接器.TP53硝酸蒸汽試驗.鍍金層 | Electric Connectors - TP53, Nitric Acid Vapor Test, Gold Finish |
| ANSI/HI 8.1-8.5-2000 | 蒸汽直動活塞泵.術語、定義、應用和操作 | Direct Acting Steam Pumps for Nomenclature, Definitions, Application, and Operation |
| ANSI/IEEE 502-1985 | 礦物燃料裝置連接的蒸汽站防護、聯鎖和控制指南 | Fossil-Fueled Unit-Connected Steam Stations, Guide for Protection, Interlocking, and Control of |
| ANSI/ISA 77.44.01-2007 | 化石燃料廠蒸汽溫度控制系統.圓通型 | Fossil Fuel Plant Steam Temperature Control System - Drum Type |
| ANSI/ISEA 102-1990 | 氣體檢測管.工作環境中毒氣和毒蒸汽的快速檢測型 | Gas Detector Tube Units - Short-Term Type for Toxic Gases and Vapors in Working Environments |
| ANSI/NFPA 18A-2006 | 火災控制和蒸汽緩解用水添加劑的標準 | Standard on Water Additives for Fire Control and Vapor Mitigation |
| ANSI/NFPA 8506-1995 | 熱回收蒸汽發生器 | Heat Recovery Steam Generators |
| ANSI/SAE J639-1994 | 汽車客車車廂制冷的機械蒸汽壓縮制冷設備或系統的安全實施規程 | Mechanical Vapor Compression Refrigeration Equipment or Systems Used to Cool Passenger Compartment of Motor Vehicles, Safety Practices for |
| ANSI/UL 260-2007 | 防火服務用蒸汽收集器和集水閥門安全性的標準 | Standard for Safety for Dry Pipe and Deluge Valves for Fire-Protection Service |
| ASME PTC 19.11-1997 | 動力循環中水和蒸汽的取樣、狀態調節和分析 | (Steam and water sampling, conditioning, and analysis in the power cycle) |
| ASME PTC 32.1-1969 | 核裝置蒸汽供給系統 | (Nuclear steam supply systems) |
| ASME PTC 39.1-1980 | 蒸汽系統的冷凝水清除裝置 | (Condensate removal devices for steam systems) |
| ASME PTC 4-1998 | 燃燒式蒸汽發生器 | (Fired steam generators) |
| ASME PTC 4.2-1969 | 煤塊粉碎機.PTC4.1蒸汽發生組件運行測試規程補充件 | (Coal pulverizers - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.3-1968 | 空氣加熱器.PTC4.1蒸汽發生組件運行測試規程補充件 | (Air heaters - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.4-1981 | 燃?xì)廨啓C熱回收蒸汽發生器 | (Gas turbine heat recovery steam generators) |
| ASME PTC 5-1949 | 往復式蒸汽發動機 | (Reciprocating steam engines) |
| ASME PTC 7-1949 | 往復式蒸汽驅動活塞泵 | (Reciprocating steam-driven displacement pumps) |
| ASME PTC PM-1993 | 蒸汽發電廠運行監控導則 | (Performance monitoring guidelines for steam power plants) |
| ASTM A 472/A 472M-2007 | 蒸汽渦輪機軸和轉子鍛件熱穩定性的標準規范 | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM B 66/B 66M-2006 | 蒸汽機車易損零件用青銅鑄件的標準規范 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM B 735-2006 | 用硝酸蒸汽測試金屬基體上金涂層孔隙率的標準試驗方法 | Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ASTM B 799-1995 | 用亞硫酸/SO2蒸汽測試金和鈀鍍層孔隙度的標準試驗方法 | Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor |
| ASTM B 935-2005 | 黑色粉末冶金(P/M)材料蒸汽處理的標準指南 | Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials |
| ASTM C 1104/C 1104M-2000 | 測定未覆面礦物纖維絕緣材料蒸汽的吸收率的標準試驗方法 | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 1258-1994 | 隔熱用蒸汽緩凝劑耐高溫和耐濕度性能標準試驗方法 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1263-1995 | 撓性水蒸汽緩凝劑熱完整性標準試驗方法 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM D 1066-2006 | 取樣蒸汽的標準實施規程 | Standard Practice for Sampling Steam |
| ASTM D 1142-1995 | 露點溫度法測定氣體燃料中蒸汽含量的標準試驗方法 | Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature |
| ASTM D 2029-1997 | 用露點法測定電絕緣氣體中水蒸汽含量的試驗方法 | Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point |
| ASTM D 2186-2005 | 蒸汽中沉積雜質的標準試驗方法 | Standard Test Methods for Deposit-Forming Impurities in Steam |
| ASTM D 3483-2005 | 蒸汽發生器管中累積沉積物的標準試驗方法 | Standard Test Methods for Accumulated Deposition in a Steam Generator Tube |
| ASTM D 3603-2007 | 有水的情況下蒸汽渦輪機油的防銹特性用標準試驗方法(水平圓盤法) | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM D 3833-1996 | 壓感膠帶的水蒸汽穿透性的試驗方法 | Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 4079-2000 | 蒸汽脫脂級亞甲基氯的標準規范 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM D 4237-1990 | 蒸汽設備用橡膠軟管的試驗方法 | Test Methods for Rubber Hose Used for Steam Applications |
| ASTM D 4304a-2006 | 蒸汽或燃?xì)廨啓C中用礦物潤滑劑的標準規范 | Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines |
| ASTM D 4376-2002 | 蒸汽脫脂等級全氯乙烯的標準規范 | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| ASTM D 4378-2003 | 蒸汽和燃?xì)廨啓C用礦物油在使用過程中監測的標準實施規程 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 4463-1996 | 淡水分裂催化劑的金屬自由蒸汽去活化作用標準指南 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 5052-2000 | 皮革對水蒸汽的滲透性的標準試驗方法 | Standard Test Method for Permeability of Leather to Water Vapor |
| ASTM D 6368-2006 | 基于一般級別的丙基溴化物和技術級別的一般級別的丙基溴化物的蒸汽脫脂溶劑的標準規范 | Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide |
| ASTM D 814-1995 | 橡膠特性揮發性液體蒸汽滲透性的標準試驗方法 | Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids |
| ASTM E 1385-2000 | 用蒸汽蒸餾法分立和濃縮從火燒瓦礫樣品中獲取的可燃液體殘渣的標準實施規程 | Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation |
| ASTM E 1643-1998 | 與混凝土板下土壤或粒狀填料接觸用水蒸汽阻滯劑的安放標準實施規范 | Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
| ASTM E 1993-1998 | 與混凝土板下土壤或粒狀填料接觸用瀝青水蒸汽阻滯劑的標準規范 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 947-1983 | 化學分析用單相地?zé)嵋后w取樣或蒸汽取樣 | Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis |
| ASTM F 1139-1988 | 蒸汽疏水閥和排水管 | Standard Specification for Steam Traps and Drains |
| ASTM F 1217-2003 | 蒸汽炊具的標準規范 | Standard Specification for Cooker, Steam |
| ASTM F 1484-2005 | 蒸汽鍋性能的標準試驗方法 | Standard Test Methods for Performance of Steam Cookers |
| ASTM F 1508-1996 | 用于蒸汽、氣體和液體設備的角型減壓閥標準規范 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 1522-1995 | 使用蒸汽洗提工藝減少化學溢流的標準導則 | Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills |
| ASTM F 2069-2000 | 評價爆破蒸汽探測器的標準操作規程 | Standard Practice for Evaluation of Explosives Vapor Detectors |
| ASTM G 2/G 2M-2006 | 在750°F蒸汽中或在680°F水中鋯、鉿及其合金產品的腐蝕測試的標準試驗方法 | Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C] |
| IEEE 502-1985 | 使用礦物燃料的機組連接蒸汽站的保護、聯鎖及控制指南 | (Guide for protection, interlocking, and control of fossil-fueled unit-connected steam stations) |
| UL 260-1994 | 防火用蒸汽收集器和和集水閥門 | (Dry pipe and deluge valves for fire-protection service ) |
| UL 61010A-2-041-2002 | 實驗室用電氣設備.第2部分:醫用材料處理和實驗室作業用蒸汽高壓釜的特殊要求 | (Electrical equipment for laboratory use - Part 2: Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes ) |
| 編號 | 中文名稱 | 英文名稱 |