| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1123-2006 | 蒸汽鍋爐和壓縮空氣設備用易熔塞.規范 | Fusible plugs for steam boilers and compressed air applications - Specification |
| BS 2486-1997 | 蒸汽鍋爐和熱水器水處理推薦規范 | Recommendations for treatment of water for steam boilers and water heaters |
| BS 2782-8 Method 822A-1992 | 塑料試驗方法.第8部分:其他性能.方法822A:塑料薄膜水蒸汽傳播速度測定 | Methods of testing plastics - Other properties - Determination of water vapour transmission rate of plastics films (sachet method) |
| BS 3166-1959 | 溫度范圍為-20-220°F(-30-105℃)用溫度記錄器(注入液體型與蒸汽壓力型)規范 | Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20 °F to 220 °F ( -30 °C to 105 °C) |
| BS 3177-1959 | 包裝用柔性薄片材料的水蒸汽滲透性的測定方法 | Method for determining the permeability to water vapour of flexible sheet materials used for packaging |
| BS 3970-2-1991 | 醫療制品滅菌消毒設備.第2部分:含水液體密封硬質容器用蒸汽消毒器規范 | Sterilizing and disinfecting equipment for medical products - Specification for steam sterilizers for aqueous fluids in sealed rigid containers |
| BS 3970-5-1990 | 醫療制品滅菌消毒設備.第5部分:低溫蒸汽消毒器規范 | Sterilizing and disinfecting equipment for medical products - Specification for low temperature steam disinfectors |
| BS 5122-1986 | 低壓和中壓飽和蒸汽用橡膠軟管規范 | Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 5342-1985 | 高壓飽和蒸汽橡膠管規范 | Specification for rubber hoses for high-pressure saturated steam |
| BS 5410-2-1978 | 燒油慣例.第2部分:輸出功率大于等于45kW的空間加熱、熱水和蒸汽供應設備 | Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services |
| BS 6023-1981 | 自動蒸汽疏水閥的英國標準術語詞匯表 | British Standard Glossary of technical terms for Automatic steam traps |
| BS 6956-5-1992 | 接合材料和化合物.用于水、低壓飽和蒸汽、一類燃?xì)?不包括煤氣)和二類燃?xì)獾慕雍喜牧虾突衔镆?guī)范. | Jointing materials and compounds - Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases |
| BS 7005-1988 | 蒸汽壓縮致冷系統用碳鋼非用火壓力容器的設計和制造規范 | Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems |
| BS 7328-1990 | 模型蒸汽發動機和內燃機規范 | Specification for model steam engines and internal combustion engines for models |
| BS 7406-1991 | 用動態吹氣和靜態氣體法對紙和紙板的水蒸汽透濕率的測定方法 | Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods |
| BS 845-1-1987 | 蒸汽、熱水和高溫傳熱流體用鍋爐熱性能的估算方法.第1部分:簡明方法 | Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Concise procedure |
| BS 845-2-1987 | 蒸汽、熱水和高溫傳熱流體用鍋爐熱性能的估算方法.第2部分:綜合方法 | Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Comprehensive procedure |
| BS 903-A18-1973 | 橡膠的物理試驗.第A18部分:平衡水蒸汽吸收的測定 | Physical testing of rubber - Determination of equilibrium water vapour absorption |
| BS DD IEC TS 61370-2002 | 蒸汽輪機.蒸汽純度 | Steam turbines - Steam purity |
| BS EN 12086-1997 | 建筑物絕熱產品.水蒸汽氣散發性能測定 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| BS EN 12347-1998 | 生物技術.蒸汽滅菌器和高壓釜性能規范 | Biotechnology - Performance criteria for steam sterilizers and autoclaves |
| BS EN 13060-2005 | 小型蒸汽滅菌器 | Small steam sterilizers |
| BS EN 13081-2001 | 危險品運輸罐.裝罐設備.蒸汽收集適配器和耦合器 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adapter and coupler |
| BS EN 13082-2001 | 危險品運輸罐.裝罐設備.蒸汽傳輸閥門 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| BS EN 13528-1-2002 | 環境空氣質量.測定氣體和蒸汽濃縮度的擴散樣品.要求和試驗方法.一般要求 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements |
| BS EN 13528-2-2002 | 環境空氣質量.測定氣體和蒸汽濃縮度的擴散樣品.要求和試驗方法.特殊要求和試驗方法 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods |
| BS EN 14180-2003 | 醫用滅菌器.低溫蒸汽和甲醛滅菌器.要求和試驗 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| BS EN 14423-2004 | 額定壓力到18bar的蒸汽軟管用夾具型連接組件 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 14790-2005 | 固定源排放.管道中水蒸汽的測定 | Stationary source emissions - Determination of the water vapour in ducts |
| BS EN 15218-2006 | 空間冷卻用帶蒸汽冷凝器和電驅動壓縮機的空氣調節裝置和液態制冷包.術語、定義、試驗條件、試驗方法和要求 | Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements |
| BS EN 15424-2007 | 醫療設備滅菌.低溫蒸汽和甲醛滅菌器.醫療設備滅菌過程的制定、確認和常規控制的要求 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 27841-1991 | 自動凝汽閥蒸汽損失的測定方法 | Methods for determination of steam loss of automatic steam traps |
| BS EN 285-2006 | 清毒.蒸汽消毒器.大型消毒器 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN 31092-1994 | 紡織材料.生理學特性測定.在穩態條件下測量熱阻及水蒸汽阻(水氣保護熱板試驗) | Textiles - Determination of physiological properties - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| BS EN 45510-4-2-1999 | 發電站設備采購指南.鍋爐附屬設備.煤氣/空氣、蒸汽/空氣和煤氣/煤氣加熱器 | Guide for the procurement of power station equipment - Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters - Gas-air ,steam-air and gas-gas heaters |
| BS EN 45510-5-1-1998 | 發電站設備采購指南.正蒸汽輪機 | Guide for the procurement of power station equipment - Steam turbines |
| BS EN 60335-2-42-2003 | 家用和類似用途電器的安全規范.商用強制對流電灶、蒸鍋和蒸汽對流爐的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| BS EN 60335-2-54-2003 | 家用和類似用途電器.安全.使用液體或蒸汽的家用表面清潔器具的特殊要求 | Household and similar electrical appliances - Safety - Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
| BS EN 60335-2-79-2004 | 家用和類似用途電器.安全.高壓清潔機和蒸汽清潔機的特殊要求 | Household and similar electrical appliances - Safety - Particular requirements for high pressure cleaners and steam cleaners |
| BS EN 60335-2-85-2003 | 家用和類似用途電器的安全.織物蒸汽熨斗的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements for fabric steamers |
| BS EN 61063-1996 | 聲學.由蒸汽輪機和被驅動機器發出的氣載噪音測量 | Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery |
| BS EN 838-1996 | 工作場所的環境.測定氣體和水蒸汽用的擴散取樣器.要求和試驗方法 | Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods |
| BS EN 868-8-1999 | 準備消毒的醫療設備用的包裝材料和系統.符合EN 285規定的蒸汽消毒器用的可重復使用的消毒容器.要求和試驗方 | Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods |
| BS EN ISO 105-E11-1997 | 紡織品.色牢度試驗.第E10部分:耐蒸汽色牢度 | Textiles - Tests for colour fastness - Colour fastness to steaming |
| BS EN ISO 105-S03-1996 | 紡織品.色牢度試驗.第S03部分:耐硫化色牢度.直接蒸汽 | Textiles - Tests for colour fastness - Colour fastness to vulcanization - Open steam |
| BS EN ISO 11138-5-2006 | 醫療保健產品滅菌.生物指示物.低溫蒸汽和甲醛滅菌用生物指示劑 | Sterilization of health care products - Biological indicators - Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| BS EN ISO 11140-3-2007 | 保健品滅菌.化學指示劑.蒸汽滲透布維-狄(Bowie和Dick)型試驗2級指示劑系統 | Sterilization of health care products - Chemical indicators - Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| BS EN ISO 11140-4-2007 | 保健品滅菌.化學指示劑.蒸汽滲透檢測布維-狄(Bowie和Dick)型試驗可選2級指示劑 | Sterilization of health care products - Chemical indicators - Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN ISO 15721-2001 | 金屬覆層.孔隙率試驗.用亞硫酸和二氧化硫蒸汽對金和鈀涂層孔隙率的測定 | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour |
| BS EN ISO 5983-2-2005 | 動物飼料.含氮量的測定和粗蛋白含量的計算.分塊分解/蒸汽蒸餾法 | Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Block digestion/steam distillation method |
| BS EN ISO 6134-2005 | 飽和蒸汽用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for saturated steam - Specification |
| BS ISO 3007-2002 | 石油及其產品試驗方法.BS 2000-69: 石油產品.蒸汽壓力的測定.瑞利法 | Methods of test for petroleum and its products - BS 2000-69: Petroleum products - Determination of vapour pressure - Reid method |
| 編號 | 中文名稱 | 英文名稱 |