| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 1015-9-1999 | 圬工用灰漿試驗方法 第9部分：新鮮灰漿使用壽命和調整時間的測定 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar |
| EN 116000-2-1992 | 通用規范：機電有或無繼電器 第2部分：時間延遲繼電器通用數據和試驗方法 | Generic specification- Electromechanical all-or-nothing relays- part 2: Generic data and methods of test for time delay relays |
| EN 12189-1999 | 混凝土結構保護和修繕用產品及系統 試驗方法 間隔時間的測定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time |
| EN 12846-2002 | 瀝青和瀝青粘合劑 用射流粘度計測定瀝青乳液流動時間 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| EN 1296-2000 | 屋頂材料的防水撓性薄板、 瀝青、塑料和橡膠薄板 長時間暴露在高濕環境下的天然老化方法 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| EN 13075-2-2002 | 石油制品 瀝青和瀝青粘合劑 斷裂性能測定 第2部分：陽離子瀝青乳液細粒混合時間的測定 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions |
| EN 13294-2002 | 用于保護和修整混凝土結構的產品和系統 試驗方法 硬化時間的測定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
| EN 13319-2000 | 潛水附件 深度計和深度、時間組合測量設備 功能和安全要求、試驗方法 | Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods |
| EN 13357-2002 | 瀝青和瀝青粘合劑 溶于汽油和軟制瀝青制品流動時間的測定 | Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens |
| EN 13400-2001 | 鞋類 取樣地點、樣品和試件制備和修整持續時間 | Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces |
| EN 13409-2002 | 水壓調整地面平滑和/或調平用復合物的試驗法 調整時間測定 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
| EN 1346-1996+A1-1998 | 瓷磚粘合劑 晾開時間的測定 | Adhesives for tiles - Determination of open time |
| EN 13630-12-2002 | 民用炸藥 導爆索和安全引信 第12部分：安全引信燃燒持續時間的測定 | Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
| EN 13850-2002 | 郵政服務 服務質量 單件優先郵件和一級郵件的點到點傳遞時間測量 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| EN 14187-2-2003 | 低溫用接縫密封劑 第2部分：消耗時間測定的試驗方法 | Cold applied joint sealants - Part 2: Test method for the determination of tack free time |
| EN 14508-2003 | 郵政服務 服務質量 單件非優先級郵件和二級郵件點到點運輸時間的測定 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 1811-1998 | 直接和長時間接觸皮膚的產品中鎳釋放量的基準試驗方法 | Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin |
| EN 196-3-1994+AC-1995 | 測試水泥的方法 第3部分：放置時間和固結性的測定 | Methods of testing cement - Part 3: Determination of setting time amd soundness |
| EN 1989-2000 | 熱塑性管道系統 埋地?zé)o壓污水用接頭 通過估計密封壓力對熱塑彈性塑料(TPE)密封接頭的長時間密封性能的試 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| EN 28601-1992 | 數據元和交換格式 信息交換 時間和日期的表示 | Data elements and interchange formats - Information interchange; representation of dates and times (ISO 8601:1988 and technical corrigendum 1:1991) |
| EN 29117-1992 | 色漆和清漆 貫穿干燥狀態和貫穿干燥時間 試驗方法 | Paints and varnishes - Determination of through-dry state and through-dry time - Method of test (ISO 9117:1990) |
| EN 3-1-1996 | 便攜式滅火器 第1部分：A類和B類滅火試驗的描述和操作時間 | Portable fire extinguishers - Part 1: Description, duration of operation, class A and B fire test |
| EN 4185-2001 | 航空航天系列 鈦合金管連接8°30′ 長時間運行艙壁三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees bulkhead on run long |
| EN 480-2-1996 | 混凝土、灰泥和水泥漿的混合物 試驗方法 第2部分：凝固時間的測定 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| EN 60068-2-57-2000 | 環境試驗 第2-57部分：試驗 試驗Ff：振動 時間歷程法 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration, time-history method (IEC 60068-2-57:1999) |
| EN 60461-2001 | 磁帶錄像機的時間碼和控制碼 | Time and control code for video tape recorders (IEC 60461:2001) |
| EN 60512-25-3-2001 | 電子設備用連接器 試驗和測量 第25-3部分:試驗25c 上升時間特性變壞 | Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c: Rise time degradation (IEC 60512-25-3:2001) |
| EN 60669-2-3-1997 | 家用和類似用途的固定電器設備開關 第２－３部分：特殊要求 時間延遲開關 | Switches for household and similar fixed-electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) (IEC 60669-2-3:1997) |
| EN 61300-3-21-1998 | 光纖互連器件和無源元件 基本試驗和測量程序 第3-21部分：檢查和測量 切換時間和回跳時間 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time (IEC 61300-3-21:1998) |
| EN 728-1997 | 塑料管道和導管系統 聚烯烴管和配件 氧化感應時間的測定 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| EN ISO 11554-2003 | 光學和光學儀器 激光和激光設備 激光束功率、能量和時間特征的試驗方法 | Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003) |
| EN ISO 2431-1996+AC-1999 | 色漆和清漆 用流量杯測定流出時間 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:1993, including Technical Corrigendum 1:1994) |
| EN ISO 2535-2002 | 塑料 不飽和聚脂樹脂 25℃時膠凝時間的測量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| EN ISO 2578-1998 | 塑料 長期熱暴露作用后時間和溫度極限的測定 | Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 3382-2000 | 聲學 根據其他聲學參數測量房間混向時間 | Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997) |
| EN ISO 4490-2001 | 金屬粉末 用校準漏斗(霍爾流量計)測定流動時間 | Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001) |
| EN ISO 9073-8-1998 | 紡織品 非織造布試驗方法 第8部分：液體滲透時間的測定(模擬尿) | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9396-2000 | 塑料 酚醛樹脂 用自動裝置在給定溫度下對凝膠時間的測定 | Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997) |
| ENV 1156-1998 | 木基板 加載時間和蠕變因素的測定 | Wood-based panels - Determination of duration of load and creep factors |
| ENV 12381-1996 | 保健信息學 特殊保健問題的時間標準 | Health care informatics - Time standards for healthcare specific problems |
| ENV 12625-8-2001 | 薄紙和薄紙產品 第８部分：吸水時間、吸水率 人工和自動試驗方法 | Tissue paper and tissue products - Part 8: Water absorption time, water absorption capacity; Manual and automated test method |
| ENV 302-5-2001 | 承重木結構用膠粘劑 試驗方法 第5部分：常規裝配時間的測定 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time |
| ENV 302-5-2003 | 承重木結構用膠粘劑 試驗方法 第5部分：常規裝配時間的測定 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time |
| ENV 583-6-2000 | 無損檢測 超聲波檢驗 第6部分：作為間隔性波分級和探測方法的飛行時間衍射技術 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| HD 311.10 S1-1989 | 磁帶錄音和重放系統 第10部分：時間碼和地址碼 | Magnetic tape sound recording and reproducing systems-Part 10: Time and address codes |
| prEN 2349-304-2000 | 航空航天系列 繼電器和接觸器要求和試驗程序 第304部分：工作時間和釋放時間 | Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time |
| prEN 2349-305-2000 | 航空航天系列 繼電器和接觸器要求和試驗程序 第305部分：反彈時間 | Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time |
| prEN 302-6-2001 | 承重木結構用膠粘劑 試驗方法 第6部分：常規壓干時間的測定 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time |
| prEN 3095-1998 | 航空航天系列 密封劑 測試方法 延長裝配時間的確定 | Aerospace series - Sealants - Test method - Determination of extended assembly time |
| prEN ISO 8601-2002 | 數據元和交換格式 信息交換 時間和日期的表示 | Data elements and interchange formats - Information interchange - Representation of dates and times (ISO 8601:2000) |
| 編號 | 中文名稱 | 英文名稱 |