| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A85-009-6-2003 | 弧焊設備.第6部分:有限工作時間手動金屬弧焊電源 | (Arc welding equipment - Part 6 : limited duty manual metal arc welding power sources.) |
| NF A95-113-2002 | 金屬粉末.用校準漏斗(霍爾流量計)測定流動時間 | (Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter).) |
| NF B38-302-1983 | 紡織玻璃纖維.增強塑料用的短絲玻璃纖維.粘合劑吞苯乙烯中溶解時間的測定 | (Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene.) |
| NF C20-757-2001 | 環境試驗.第2-57部分:試驗.試驗Ff:振動.時間關系法 | (Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history method.) |
| NF C42-710-1988 | 照度計.計量特性的測定,按隨時間進展的主要特性的檢查、校準、及按計量特性進行分類 | (PHOTOMETERS. DETERMINATION OF METROLOGICAL CHARACTERISTICS,CLASSIFICATION ACCORDING TO THE LATTER,CALIBRATION,CHECK OF THE MAIN CHARACTERISTICS LIABLE TO VARY WITH TIME.) |
| NF C42-711-1989 | 亮度計.計量特性的測定.根據計量特性進行分類、按時間改變進展的主要特性檢查與校準 | (LUMINANCE METERS. DETERMINATION OF METROLOGICAL CHARACTERISTICS,CLASSIFICATION ACCORDING TO THE LATTER,CALIBRATION,CHECK OF THE MAIN CHARACTERISTICS LIABLE TO VARY WITH TIME.) |
| NF C45-211-1985 | 繼電器.用指定時間測量單向輸入能量用的繼電器 | (Electrical relays. Single input energizing quantity measuring relays with dependent specified time.) |
| NF C45-213-1998 | 繼點器.第3部分:依賴時間或非依賴時間的單輸入引擎質量測量繼電器 | (Electrical relays. Part 3 : single input energizing quantity measuring relays with dependent or independent time.) |
| NF C45-251-1983 | 繼電器.一般用繼電器.第1部分:瞬時(不規定時間)“與或非“繼電器 | (ELECTRICAL RELAYS. GENERAL PURPOSE RELAYS. PART 1 : ALL-OR-NOTING RELAYS WITH NON-SPECIFIED TIME. QUALIFICATION STANDARD.) |
| NF C45-253-1997 | 工業用規定時間繼電器.第1部分;要求和試驗 | (Specified time relays for industrial use. Part 1 : requirements and tests.) |
| NF C45-255-1999 | 質量評定的機電式無時間規定的“有“或“無”繼電器.第1部分:一般規范 | (Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1 : generic specification.) |
| NF C61-113-1998 | 家用和類似固定電氣安裝開關.第2-3部分:特殊要求.時間延遲開關(TDS) | (Switches for household and similar fixed electrical installations. Part 2-3 : particular requirements. Time-delay switches (TDs).) |
| NF C93-400-23-4-2002 | 電子設備用連接器.試驗和測量.第23-4部分: 篩選和過濾試驗.試驗 23d: 時間域中的傳輸線路反射 | (Connectors for electronic equipment - Tests and measurements - Part 23-4 : screening and filtering tests - Test 23d : transmission line reflections in the time domain.) |
| NF C93-400-25-3-2002 | 電子設備用連接器.試驗和測量.第25-3部分: 試驗 25c:上升時間梯度 | (Connectors for electronic equipment - Tests and measurement - Part 25-3 : test 25c - Rise time degradation.) |
| NF C93-903-21-1998 | 光纖互聯裝置和無源元件.基本試驗和測量過程.第3-21部分:檢驗和測量.開關時間和回跳時間 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-21 : examinations and measurements. Switching time and bounce time.) |
| NF C97-105-2002 | 磁帶錄像機的時間和控制編碼 | (Time and control code for video tape recorders.) |
| NF C97-152-1993 | 非播送錄像機.時間穩定性. | (Non-broadcast video tape recorders. Time base stability.) |
| NF E29-792-2002 | 可移動儲氣瓶.恒定氣體和液化氣體(不包括乙炔)用鋼瓶組.灌裝時間的檢查 | (Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E60-172-9-2001 | 組合加工中心機床的試驗條件.第9部分:工具和墊板轉換的操作時間的評價 | (Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change.) |
| NF G35-018-1987 | 紡織地毯.短時間施加中等靜負荷后厚度減薄的測定 | (Textile floor coverings. Determination of thickness loss after brief, moderate static loading.) |
| NF G35-019-1987 | 紡織地毯.長時間施加中等靜負荷后厚度減薄的測定 | (Textile floor coverings. Determination of thickness loss after prolonged, heavy static loading.) |
| NF L16-114-1991 | 航空工業.涂料和清漆.掩蔽時間的測定 | (AEROSPACE SERIES. PAINTS AND VARNISHES. DETERMINATION OF MASKING TIME.) |
| NF L16-115-1991 | 航空工業.涂料和清漆.“中心固化“干燥時間測定 | (AEROSPACE SERIES. PAINTS AND VARNISHES. DETERMINATION OF DRYING TIME “CORE HARD“.) |
| NF L16-116-1991 | 航空工業.涂料和清漆.“點固化“干燥時間測定 | (AEROSPACE SERIES. PAINTS AND VARNISHES. DETERMINATION OF DRYING TIME “NEEDLE HARD“.) |
| NF P12-309-2000 | 圬工灰漿的試驗方法.第9部分:新鮮灰漿的可工作壽命和可改變時間的測定 | (Methods of test for mortar for masonry - Part 9 : determination of workable life and correction time of fresh mortar.) |
| NF P15-473-1995 | 水泥的試驗方法.第三部分:凝結時間和安定性的測定 | (Methods of testing cement. Part 3 : determination of setting time and soundness.) |
| NF P18-311-1996 | 混凝土、灰泥和薄漿混合料.試驗方法.第2部分:凝結時間的測定 | (Admixtures for concrete, mortar and grout. Test methods. Part 2 : determination of setting time.) |
| NF P18-452-1988 | 混凝土.和易性測量計測定混凝土流動時間 | (CONCRETES. MEASURING THE FLOW TIME OF CONCRETES AND MORTARS USING A WORKABILITYMETER.) |
| NF P18-874-1989 | 水硬性混凝土建筑用的特殊產品.粘結兩塊混凝土的產品.最大粘合時間的試驗 | (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. PRODUCTS FOR MAKING STRUCTURAL JOINTS BETWEEN TWO CONCRETE ELEMENTS. TEST FOR DETERMINING THE MAXIMUM ASSEMBLY TIME.) |
| NF P18-934-1999 | 混凝土結構的防護和修理用產品和系統,試驗方法. 開放時間測定(EN 12189) | (PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF OPEN TIME. (EUROPEAN STANDARD EN 12189).) |
| NF P18-942-2002 | 混凝土結構的防護和維修用產品和系統.試驗方法.凝固時間的測定 | (Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time.) |
| NF P61-603-1998 | 瓷磚粘結劑.敞露時間的測定 | (Adhesives for tiles. Determination of open time.) |
| NF P98-231-6-1997 | 有關路面的試驗.非瀝青材料的壓實試驗.第6部分:使用延時壓縮法測定粒狀粘結材料的使用壽命和時間 | (TEST RELATING TO PAVEMENTS. COMPACTION TESTS ON NON BITUMINOUS MATERIALS. PART 6 : WORKABILITY TIME LIMIT DETERMINATION OF GRANULAR MATERIALS AND SAND BOUND WITH CEMENTITIOUS BINDER USING DELAYED COMPACTION.) |
| NF P98-897-2-2003 | 冷用接縫密封膠.第2部分:指觸干時間測定的試驗方法 | (Cold applied joint sealants - Part 2 : test method for the determination of tack free time.) |
| NF P99-450-1993 | 停車時間控制儀.記時打印機:功能及技術特性 | (PARK TIME MONITORING APPARATUS. TIME STAMPS : FUNCTIONAL AND TECHNICAL CHARACTERISTICS.) |
| NF Q34-016-1986 | 衛生和家庭用品.單用途擦手紙.尿布和衛生紙及類似產品.非織物護層濕透時間測定 | (ITEMS FOR SANITARY AND DOMESTIC USE. SINGLE-USE DIAPERS,NAPPIES,SANITARY NAPKINS AND SIMILAR PRODUCTS. DETERMINATION OF WETTING TIME OF PROTECTIVE NON-WOWEN LAYERS.) |
| NF S10-121-2003 | 光學和光學儀器.激光和相關激光設備.激光束功率、能量和時間特征的試驗方法 | (Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.) |
| NF S31-012-2000 | 聲學.與其他聲學參數有關的室內混響時間的測定 | (Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters.) |
| NF S52-355-2000 | 潛水用輔助裝置.深度儀和組合式深度和時間測量設備.功能和安全要求、試驗方法 | (Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods.) |
| NF S61-905-1996 | 輕便式滅火器.第1部分:A類和B類消防試驗操作的描述和時間 | (Portable fire extinguishers. Part 1 : description, duration of operation, class A and B fire test.) |
| NF S86-305-1996 | 計時儀表用的輻射發光.時間測量?jī)x表的輻射發光.規范 | (Horology. Radioluminescent time measuring instruments.) |
| NF S86-306-2003 | 時間測量?jī)x表.輻射發光鍍層檢驗條件 | (Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.) |
| NF S87-500-1987 | 鐘表業.計時.以雙繞線的編碼信號從母鐘到子鐘的時間傳送.要求 | (HOROLOGY. TIME TRANSMISSION FROM MASTERCLOCK TO SECONDARY CLOCKS BY CODED SIGNALS ON DOUBLE-WOUND. REQUIREMENTS.) |
| NF T03-400-1997 | 合成礦物纖維.在鼠肺中持續時間的測定.吸入試驗 | (SYNTHETIC MINERAL FIBRES. DETERMINATION OF PULMONARY BIOPERSISTENCE IN THE RAT. INHALATION TEST.) |
| NF T30-070-1996 | 色漆和清漆.用流量杯測定流動時間 | (Paints and varnishes. Determination of flow time by use of flow cups.) |
| NF T30-087-1992 | 色漆和清漆.干透狀態和干透時間.試驗方法 | (PAINTS AND VARNISHES. DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME. METHOD OF TEST. (EUROPEAN STANDARD EN 29117).) |
| NF T30-506-1981 | 熱固性粉狀涂料.在給定溫度下膠凝時間的測定 | (THERMOSETTING POWDER PAINTS. DETERMINATION OF THE GEL TIME AT A GIVEN TEMPERATURE.) |
| NF T40-101-1979 | 橡膠.試樣調理和試驗的標準溫度、濕度和延續時間 | (RUBBER. TEST SPECIMEN. CONTROLLED ATMOSPHERES. TEST ATMOSPHERES.) |
| NF T51-000-1978 | 塑料.優選試驗溫度和試驗時間 | (Plastics. Preferred scales of temperatures and test durations.) |
| NF T51-225-1998 | 塑料.長時間受熱后時間-溫度極限值的測定 | (Plastics. Determination of time-temperature limits after prolonged exposure to heat.) |
| NF T51-429-2001 | 塑料.酚醛樹脂.用自動設備測定特殊條件下的膠凝時間 | (Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus.) |
| NF T51-512-2003 | 塑料.不飽和聚酯樹脂.室溫條件下膠凝時間的測量 | (Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.) |
| NF T54-075-1997 | 塑料管和管道系統.聚烯烴管和配件.氧化時間的測定(歐洲標準EN 728) | (Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.) |
| NF T56-123-1974 | 合成橡膠或塑料微孔制品.微孔材料在一定時間內吸水性的測定 | (CELLULAR PRODUCTS OF ELASTOMER OR PLASTICS. DETERMINATION OF WATER ABSORPTION OF CELLULAR MATERIALS OVER A GIVEN PERIOD OF TIME.) |
| NF T57-559-1975 | 玻璃織物增強塑料.環氧樹脂預浸玻璃織物.粘合時間 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.) |
| NF T66-005-2003 | 瀝青和瀝青粘合劑.石油輕制和軟制瀝青流出時間的測定 | (Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens.) |
| NF T66-017-2-2002 | 瀝青和瀝青粘合劑.斷裂特性的測定.第2部分:陽離子瀝青乳液精細混合時間的測定 | (Bitumen and bituminous binders - Determination of breaking behaviour - Part 2 : determination of fines mixing time of cationic bitumen emulsions.) |
| NF T66-020-2002 | 瀝青粘合料.用射流粘度計測定瀝青乳液的射流時間 | (Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer.) |
| NF T70-359-1996 | 軍用高能材料.物理-化學分析及特性.用射流粘度計測量TNT或TNT混合物的流出時間 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICO-CHEMICAL ANALYSES AND PROPERTIES. MEASUREMENT OF THE DURATION OF THE OUTFLOW ON THE TNT OR TNT COMPOSITIONS WITH THE EFFLUX VISCOSIMETER.) |
| NF T70-938-3-2003 | 民用炸藥.推進劑和火箭推進劑.第3部分:爆燃到爆炸過渡時間的測定 | (Explosives for civil uses - Propellants and rocket propellants - Part 3 : determination of deflagration to detonation transition.) |
| NF T76-113-1983 | 水膠.氨基塑料.不同溫度下膠凝固時間的常規測定 | (WATER ADHESIVES. AMINOPLASTIC. DETERMINATION OF CONVENTIONAL GEL TIME AT DIFFERENT TEMPERATURES.) |
| NF T76-117-1984 | 水膠.間苯二酚甲醛.間苯二酚甲醛酚.２３℃時凝結時間的常規測定 | (WATER BASED ADHESIVES. RESORCINOL FORMALDEHYDE,RESORCINOL-PHENOL FORMALDEHYDE. CONVENTIONAL DETERMINATION OF GEL SETTING TIME AT 23 DEGREES C.) |
| NF T76-411-2003 | 膠粘劑.水硬地面平整和/或找平填料的試驗方法.凝固時間 | (Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time.) |
| NF T77-103-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.薄板法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. PLATE METHOD.) |
| NF T77-107-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.往復運動自動儀法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ALTERNATE MOTION.) |
| NF T77-109-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.自動轉動儀法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ROTARY MOTION.) |
| NF V03-747-1999 | 水稻.烹飪過程中的谷粒膠凝時間的評估 | (RICE. EVALUATION OF GELATINIZATION TIME OF KERNELS DURING COOKING.) |
| NF X02-201-1993 | 空間和時間的量和單位 | (Quantities and units. Space and time.) |
| NF X10-136-1977 | 密封管道中水流量的測定.示蹤法.第6部分：非放射性示蹤物的過渡時間法 | (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS-PAR VI:TRANSIT TIME METHOD USING NON-RADIOACTIVE TRACERS.) |
| NF X10-137-1977 | 密封管道中水流量的測定.示蹤法.第7部分：放射性示蹤物的過渡時間法 | (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS. PART VII:TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.) |
| NF X10-144-1982 | 密封管道中氣體流量的測定.示蹤法.第4部分：放射性示蹤物的過渡時間法 | (MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.) |
| NF X43-254-1990 | 工作環境的空氣.一氧化碳質量濃度的測定.短時間取樣直接顯示檢測管法 | (WORK-PLACE AIR. DETERMINATION OF MASS CONCENTRATION OF CARBON MONOXIDE. METHOD USING DETECTOR TUBES FOR SHORT-TERM SAMPLING WITH DIRECT INDICATION.) |
| NF X43-504-2002 | 空氣質量.空氣質量測量平均時間的不確定度測定 | (Air quality - Determination of the uncertainty of the time average of air quality measurements.) |
| NF Z13-683-1995 | EDI.電文通知.交貨時間表電文通知(DELFOR) | (EDI. MESSAGE. DELIVERY SCHEDULE MESSAGE (DELFOR). (EUROPEAN STANDARD EN 1683).) |
| NF Z13-699-1995 | EDI.信息.發送和運輸時間表及現備情況(IFTSAI) | (EDI. MESSAGE. FORWARDING AND TRANSPORT SCHEDULE AND AVAILABILITY INFORMATION MESSAGE (IFTSAI). (EUROPEAN STANDARD EN 1699).) |
| NF Z17-001-2003 | 郵政.服務質量.單件優先信件和首類信件用端對端服務運送時間的測量 | (Postal services - Quality of services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail.) |
| NF Z17-032-2003 | 郵政服務.服務質量.單件非優先信件和一級信件用全程服務運送時間的測量 | (Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and first class mail.) |
| NF Z69-200-1993 | 數據元和交換格式.信息交換.時間日期的表示 | (Data elements and interchange formats. Information interchange. Representation of dates and times.) |
| NF Z71-314-1994 | 信息技術.以時間為基礎的多媒體結構語言 | (Information technology. Hypermedia/time-based structuring language (hytime).) |
| NF Z85-636-1998 | 傳輸和多路轉換(TM). 在頻率范圍為1GHz至3GHz內的點對多點數字無線電系統的時間分支多路通道(TDMA) | (Transmission and Multiplexing (TM). Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz.) |
| 編號 | 中文名稱 | 英文名稱 |