| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2062-1-1959 | 齒輪滾刀規范.第1部分:一般用途滾刀1-20徑節 | Specification for gear hobs. Hobs for general purposes, 1 d.p. to 20 d.p. inclusive |
| BS 2062-2-1960 | 齒輪滾刀規范.第2部分:渦輪減速機與類似傳動裝置的齒輪滾刀 | Specification for gear hobs. Hobs for gears for turbine reduction and similar drives |
| BS 2519-2-1976 | 齒輪術語.第2部分:標志方法 | Glossary for gears - Notation |
| BS 4185-11-1983 | 機床零件.第11部分:齒輪精度等級推薦規范 | Machine tool components - Recommendations for accuracy grades of gears |
| BS 436-5-1997 | 齒輪和螺旋齒輪.第5部分:齒輪齒根嚙合面偏差容許值和定義 | Spur and helical gears - Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| BS 4582-1-1970 | 小齒距齒輪(米制模數)規范.第1部分:漸開線直齒輪和斜齒輪 | Specification for fine pitch gears (metric module) - Involute spur and helical gears |
| BS 4582-2-1978 | 小齒距齒輪(米制模數)規范.第2部分:滾銑與切削 | Specification for fine pitch gears (metric module) - Hobs and cutters |
| BS 5246-1976 | 正齒輪插齒刀規范.1至8米制模數 | Specification for pinion type cutters for spur gears - 1 to 8 metric module |
| BS 545-1982 | 傘齒輪(機械切割)規范 | Specification for bevel gears (machine cut) |
| BS 6168-1987 | 非金屬正齒輪規范 | Specification for non-metallic spur gears |
| BS 6413-6-1991 | 潤滑油、工業用油和有關產品(L類).C系列(齒輪)用分類 | Lubricants, industrial oils and related products (class L) - Classification for family C (gears) |
| BS 6765-4-1987 | 休閑式房車.大篷車.第4部分:下部齒輪規范 | Leisure accommodation vehicles - Caravans - Specification for undergear |
| BS 7016-2-1988 | 往復式內燃機部件和系統.第2部分:主動齒輪的術語詞匯 | Components and systems of reciprocating internal combustion engines - Glossary of terms for main running gear |
| BS 7676-2-1993 | 齒輪驗收法規.驗收試驗期間齒輪機構機械振動的測定 | Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing |
| BS 7848-1996 | 齒輪.齒輪齒的磨損和損傷.術語 | Gears - Wear and damage to gear teeth - Terminology |
| BS 7862-1996 | 齒輪.磨削后表面回火腐蝕檢驗 | Gears - Surface temper etch inspection after grinding |
| BS 978-1-1968 | 小節距齒輪規范.第1部分:漸開線直齒和斜齒齒輪 | Specification for fine pitch gears - Involute spur and helical gears |
| BS 978-2 Addendum No. 1-1959 | 儀器和時鐘機構裝置用齒輪.第2部分:擺線齒輪.雙環弧型齒輪.補充件No. 1 | Gears for instruments and clockwork mechanisms - Cycloidal type gears - Double circular arc type gears |
| BS 978-2-1952 | 小節距齒輪.第2部分:擺線齒輪 | Specification for fine pitch gears - Cycloidal type gears |
| BS 978-3-1952 | 小節距齒輪.第3部分:傘齒輪 | Specification for fine pitch gears - Bevel gears |
| BS AU 211-1987 | 商用車輛和公共汽車齒輪傳動空氣壓縮機四孔法蘭尺寸規范 | Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses |
| BS AU 214-2-1988 | 變速箱法蘭.第2部分:商用車輛和公共汽車A型齒輪箱法蘭尺寸規范 | Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
| BS AU 214-3-1988 | 變速箱法蘭.第3部分:商用車輛和公共汽車S型齒輪箱法蘭尺寸規范 | Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
| BS AU 214a-1-1987 | 變速箱法蘭.第1部分:T形、商用車輛和公共汽車用T型正交齒齒輪變速箱法蘭的尺寸規范 | Gearbox flanges - Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses |
| BS AU 252-1993 | 道路車輛用經節起動器電動機小齒輪規范 | Specification for diametral pitch starter motor pinions for road vehicles |
| BS DD 222-1996 | 齒條和齒輪傳動升降機規范 | Specification for rack and pinion lifts |
| BS EN 14203-2004 | 遮簾和百葉窗.帶手搖曲柄的齒輪的使用性.要求和試驗方法 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| BS EN ISO 10442-2003 | 石油、化學和氣體工業.整體封裝齒輪傳動離心空氣壓縮機 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| BS EN ISO 13691-2002 | 石油和天然氣工業.專用高速齒輪組件 | Petroleum and natural gas industries - High-speed special-purpose gear units |
| BS EN ISO 13929-2001 | 小艇.操舵裝置.齒輪傳動連接系統 | Small craft - Steering gear - Geared link systems |
| BS EN ISO 2203-1997 | 技術制圖.齒輪的習慣畫法 | Technical drawing - Conventional representation of gears |
| BS EN ISO 4263-4-2006 | 石油及其產品.抑制油和流體的老化性的測定.TOST試驗.工業齒輪油的程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for industrial gear oils |
| BS EN ISO 4612-1999 | 塑料.試驗用PVC糊料的制備.齒輪傳動混合方法 | Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method |
| BS EN ISO 7785-2-1998 | 牙科器械.直的和齒輪傳動彎角器械 | Dental handpieces - Straight and geared angle handpieces |
| BS ISO 10300-1-2001 | 傘齒輪負載能力的計算.說明及一般影響因素 | Calculation of load capacity of bevel gears - Introduction and general influence factors |
| BS ISO 10300-2-2001 | 傘齒輪負載能力的計算.表面耐久性的計算(凹坑法) | Calculation of load capacity of bevel gears - Calculation of surface durability (pitting) |
| BS ISO 10300-3-2001 | 傘齒輪負載能力的計算.齒根強度的計算 | Calculation of load capacity of bevel gears - Calculation of tooth root strength |
| BS ISO 1122-1-1998 | 齒輪術語詞匯.幾何學的相關定義 | Vocabulary of gear terms - Definitions related to geometry |
| BS ISO 1275-2006 | 傳動和輸送機用雙節距的精密滾子鏈、連接件和相關的車鏈齒輪 | Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
| BS ISO 12925-1-1998 | 潤滑劑、工業用油及相關產品(L類).C系列(齒輪).第1部分:密封式齒輪系統用潤滑劑規范 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Specifications for lubricants for enclosed gear systems |
| BS ISO 14635-1-2000 | 齒輪.FZG試驗規程.有關齒輪油的抗污性的FZG試驗方法A/8、3/90 | Gears - FZG test procedures - FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils |
| BS ISO 14635-3-2006 | 齒輪.FZG試驗規程.有關半流質齒輪潤滑油的刮磨承載能力和磨損特性的FZG試驗方法A/2、8/50 | Gears - FZG test procedures - FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| BS ISO 17485-2006 | 傘形齒輪.ISO精密系統 | Bevel gears - ISO system of accuracy |
| BS ISO 18653-2003 | 齒輪.單個齒輪測量?jī)x器的評價 | Gears - Evaluation of instruments for the measurement of individual gears |
| BS ISO 21771-2007 | 齒輪.圓柱漸開線齒輪和齒輪副.概念和幾何學 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry |
| BS ISO 23509-2006 | 傘形和準雙曲面齒輪幾何學 | Bevel and hypoid gear geometry |
| BS ISO 2490-2007 | 模數0.5～40榫傳動或軸鍵帶動的實心(整體)齒輪滾刀.標稱尺寸 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0, 5 to 40 module - Nominal dimensions |
| BS ISO 53-1998 | 通用和重型工程的圓柱齒輪.標準基本齒條輪廓 | Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| BS ISO 54-1996 | 通用工程和重型工程的圓柱齒輪.模數 | Cylindrical gears for general engineering and for heavy engineering - Modules |
| BS ISO 6336-1-2006 | 正齒輪和斜齒輪負載能力的計算.基本原理、介紹和一般影響因素 | Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors |
| BS ISO 6336-2-2006 | 正齒輪和斜齒輪承載能力的計算.表面耐久性的計算(針點) | Calculation of load capacity of spur and helical gears - Calculation of surface durability (pitting) |
| BS ISO 6336-3-2006 | 正齒輪和斜齒輪承載能力的計算.齒牙彎曲強度計算 | Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength - Corrigendum 1 |
| BS ISO 6336-5-2003 | 直齒輪和斜齒輪承載能力的計算.材料的強度和質量 | Calculation of load capacity of spur and helical gears - Strength and quality of materials |
| BS ISO 6336-6-2006 | 計算正齒輪和斜齒輪承載能力.計算不同負荷設備壽命 | Calculation of load capacity of spur and helical gears - Calculation of service life under variable load |
| BS ISO 701-1998 | 齒輪的國際符號表示法.幾何參數符號 | International gear notation - Symbols for geometrical data |
| BS ISO 8579-1-2002 | 齒輪裝置驗收規程.空氣中噪聲試驗規程 | Acceptance code for gear units - Test code for airborne sound |
| BS ISO 9083-2001 | 正齒輪和斜齒輪的負載能力的計算.船用齒輪的應用 | Calculation of load capacity of spur and helical gears - Application to marine gears |
| BS ISO 9084-2003 | 正齒輪和斜齒輪承載能力計算.快速齒輪和類似要求齒輪的應用 | Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements |
| BS ISO 9085-2002 | 正齒輪和斜齒輪荷載能力的計算.應用于工業齒輪 | Calculation of load capacity of spur and helical gears - Application for industrial gears |
| BS ISO TR 10064-1-1997 | 檢驗實施規程.齒輪齒對應面的檢驗 | Code of inspection practice - Inspection of corresponding flanks of gear teeth |
| BS ISO TR 10064-2-1997 | 圓柱齒輪.檢驗實施標準.與徑向組合偏差,徑向跳動,齒厚和齒隙相關的檢驗 | Code of inspection practice - Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| BS ISO TR 10064-3-1997 | 檢驗實施規程.與齒輪坯料、軸心距和軸的平行度相關的推薦 | Code of inspection practice - Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS ISO TR 10495-1998 | 圓柱齒輪.在變化承載條件下使用壽命的計算.符合ISO 6336 規定的圓柱齒輪的條件 | Cylindrical gears - Calculation of service life under variable load - Conditions for cylindrical gears in accordance with ISO 6336 |
| BS ISO/TR 10064-4-1999 | 圓柱齒輪.檢驗實施規程.與表面紋理和齒輪齒接觸模型檢驗相關的推薦方法 | Code of inspection practice - Recommendations relative to surface texture and tooth contact pattern checking |
| BS ISO/TR 13989-1-2001 | 圓柱形齒輪、傘齒輪和準雙曲面齒輪磨損承載能力的計算.閃蒸溫度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method |
| BS ISO/TR 13989-2-2001 | 圓柱形齒輪、傘齒輪和準雙曲面齒輪的磨損承載能力的計算方法.累積溫度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method |
| BS ISO/TR 14179-1-2001 | 齒輪.熱容量.在溫度為95℃時測定齒輪傳動熱平衡 | Gears - Thermal capacity - Rating gear drives with thermal equilibrium at 95 °C sump temperature |
| BS ISO/TR 14179-2-2001 | 齒輪.熱容量.熱承載能力 | Gears - Thermal capacity - Thermal load carrying capacity |
| DD 222-1996 | 小齒輪導軌升降機規范 | Specification for rack and pinion lifts |
| 編號 | 中文名稱 | 英文名稱 |