| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10300-1-2001 | 斜齒輪承載能力的計算 第1部分：引言和一般影響因素 | Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors |
| ISO 10300-2-2001 | 斜齒輪承載能力的計算 第2部分：齒輪表面強度（點蝕）的計算 | Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting) |
| ISO 10300-3-2001 | 錐形齒輪承載能力的計算 第3部分：齒根強度的計算 | Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength |
| ISO 10442-2002 | 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| ISO 10825-1995 | 齒輪 輪齒的磨損和損傷 術語 兩種語言版 | Gears - Wear and damage to gear teeth - Terminology |
| ISO 1122-1 Technical Corrigendum 1-1999 | 齒輪名詞術語 第1部分:幾何定義 技術勘誤1 兩種語言版 | Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 1 |
| ISO 1122-1 Technical Corrigendum 2-2009 | 齒輪名詞術語.第1部分:與幾何學相關的定義.技術勘誤2 | Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 2 |
| ISO 1122-1-1998 | 齒輪名詞術語 第1部分:幾何定義 兩種語言版 | Vocabulary of gear terms - Part 1: Definitions related to geometry |
| ISO 1122-2-1999 | 齒輪名詞術語 第2部分:蝸輪的幾何定義 兩種語言版 | Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry |
| ISO 12925-1 Technical Corrigendum 1-2002 | 潤滑劑、工業用油和相關產品(L類).(齒輪)C種.第1部分:密封齒輪系統用潤滑劑.技術勘誤1 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
| ISO 12925-1-1996 | 潤滑劑、工業潤滑油和有關產品(L類) C組(齒輪) 第1部分:密式齒輪系統用潤滑劑規格 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 1328-1-1995 | 圓柱齒輪.ISO 體系的準確度.第1部分:齒輪嚙合的對應齒根面的相應偏差的容許值和定義 | Cylindrical gears - ISO system of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| ISO 1328-2-1997 | 圓柱齒輪 ISO準確度制 第2部分:徑向偏差和不圓度誤差的定義及允許偏差值 | Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 1340-1976 | 圓柱齒輪 圖樣上應注明的買方要求的尺寸數據 | Cylindrical gears; Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 1341-1976 | 錐齒輪 圖樣上應注明的買方要求的尺寸數據 | Straight bevel gears; Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 13929-2001 | 小艇 操舵裝置 齒輪傳動連接系統 | Small craft - Steering gear - General link systems |
| ISO 14104-1995 | 齒輪.磨削后表面回火腐蝕劑的檢驗 | Gears - Surface temper etch inspection after grinding |
| ISO 14635-1-2000 | 齒輪 FZG試驗程序 第1部分:測試齒輪油壓塑性變形承載能力用的A/8、3/90 FZG試驗方法 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| ISO 14635-2-2004 | 齒輪.FZG試驗程序.第2部分:測試高極壓齒輪油壓塑性變形承載能力用的A10/16、6R/120 FZG分步負載試驗 | Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 14635-3-2005 | 齒輪.FZG試驗程序.第3部分:半流齒輪潤滑脂壓塑性變形承載能力和耐磨性用A/2、8/50 FZG試驗方法 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 17485-2006 | 傘形齒輪.ISO精密系統 | Bevel gears - ISO system of accuracy |
| ISO 18653-2003 | 齒輪.單個齒輪測量用儀器的評價 | Gears - Evaluation of instruments for the measurement of individual gears |
| ISO 21771-2007 | 齒輪.圓柱漸開線齒輪和齒輪副.概念和幾何學 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry |
| ISO 2203-1973 | 技術制圖 齒輪的習慣畫法 | Technical drawings; Conventional representation of gears |
| ISO 23509-2006 | 傘形和準雙曲面齒輪幾何學 | Bevel and hypoid gear geometry |
| ISO 3820-1978 | 電影 用于超8mm電影膠片的輸片齒輪 尺寸和設計 | Cinematography; Sprockets for 8 mm Type S motion-picture film; Dimensions and design |
| ISO 4263-4-2006 | 石油及相關產品.防腐蝕礦物油和液體的老化性能測定.TOST試驗.第4部分:工業齒輪油的程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils |
| ISO 4468 Technical Corrigendum 1-2009 | 齒輪滾刀.精確度要求;技術勘誤表1 | Gear hobs - Accuracy requirements; Technical Corrigendum 1 |
| ISO 4468-2009 | 齒輪滾刀.精度要求 | Gear hobs - Accuracy requirements |
| ISO 4612-1999 | 塑料 試驗用聚氯乙烯糊料的制備 齒輪傳動混合方法 | Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method |
| ISO 53-1998 | 通用和重型機械用圓柱齒輪 基本齒廓 | Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| ISO 54-1996 | 通用機械和重型機械用圓柱齒輪 模數 | Cylindrical gears for general engineering and for heavy engineering - Modules |
| ISO 6336-1 Technical Corrigendum 1-2008 | 正齒輪和斜齒輪的負載能力計算.第1部分:基本原理、簡介和一般影響因素.技術勘誤1 | Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors; Technical Corrigendum 1 |
| ISO 6336-1-2006 | 直齒輪和斜齒輪承載能力的計算.第1部分:基本原則、引言和一般影響因素 | Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors |
| ISO 6336-2 Technical Corrigendum 1-2008 | 正齒輪和斜齒輪的負載能力計算.第2部分:表面耐久性(蝕點)計算.技術勘誤1 | Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting); Technical Corrigendum 1 |
| ISO 6336-2-2006 | 直齒輪和斜齒輪承載能力的計算.第2部分:齒輪表面強度(蝕點)的計算 | Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) |
| ISO 6336-3 Technical Corrigendum 1-2008 | 正齒輪和斜齒輪承載能力的計算.第3部分:輪齒彎曲強度的計算.技術勘誤1 | Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength; Technical Corrigendum 1 |
| ISO 6336-3-2006 | 直齒輪和斜齒輪承載能力的計算.第3部分:輪齒彎曲強度的計算 | Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength |
| ISO 6336-5-2003 | 直齒輪和斜齒輪承載能力的計算.第5部分:材料的強度和質量 | Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials |
| ISO 6336-6 Technical Corrigendum 1-2007 | 正齒輪和斜齒輪荷載能力的計算.第6部分:可變荷載下使用壽命的計算.技術勘誤1 | Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load; Technical Corrigendum 1 |
| ISO 6336-6-2006 | 直齒輪和斜齒輪承載能力的計算.第6部分:變化負荷下工作壽命計算 | Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load |
| ISO 6743-6-1990 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第6部分:C組(齒輪) | Lubricants, industrial oils and related products (class L); classification; part 6: family C (gears) |
| ISO 677-1976 | 通用機械和重型機械直齒錐齒輪 基本齒廓 | Straight bevel gears for general engineering and heavy engineering; Basic rack |
| ISO 678-1976 | 通用機械和重型機械直齒錐齒輪 模數和徑節 | Straight bevel gears for general engineering and heavy engineering; Modules and diametral pitches |
| ISO 6896-1984 | 電影 35mm電影放映機用間歇齒輪 尺寸 | Cinematography; Intermittent sprockets for 35 mm motion-picture projectors; Dimensions |
| ISO 701-1998 | 齒輪的國際符號表示法 幾何參數符號 | International gear notation - Symbols for geometrical data |
| ISO 7646-1986 | 商用車輛和公共汽車 齒輪箱法蘭 A型 | Commercial vehicles and buses; Gearbox flanges; Type A |
| ISO 7647-1986 | 商用車輛和公共汽車 齒輪箱法蘭 S型 | Commercial vehicles and buses; Gearbox flanges; Type S |
| ISO 8123-1991 | 道路車輛 起動電機徑節小齒輪 | Road vehicles; diametral pitch starter motor pinions |
| ISO 81400-4 Technical Corrigendum 1-2005 | 風力渦輪機.第4部分:齒輪箱的設計和規范.技術勘誤1 | Wind turbines - Part 4: Design and specification of gearboxes; Technical Corrigendum 1 |
| ISO 81400-4-2005 | 風力渦輪機.第4部分:齒輪箱的設計和規范 | Wind turbines - Part 4: Design and specification of gearboxes |
| ISO 8579-1-2002 | 齒輪裝置驗收規程.第1部分:空氣載聲的試驗規程 | Acceptance code for gear units - Part 1: Test code for airborne sound |
| ISO 8579-2-1993 | 齒輪驗收規則 第2部分:驗收試驗中齒輪裝置機械振動測定 | Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing |
| ISO 8667-1992 | 商用車輛和公共汽車 十字齒形齒輪箱法蘭 T型 | Commercial vehicles and buses; cross-tooth gearbox flanges; type T |
| ISO 9083-2001 | 直齒輪和斜齒輪承載能力的計算 船用齒輪的計算 | Calculation of load capacity of spur and helical gears - Application to marine gears |
| ISO 9085-2002 | 正齒輪和斜齒輪的荷載能力計算.工業齒輪應用 | Calculation of load capacity of spur and helical gears - Application for industrial gears |
| ISO 9457-1-1991 | 道路車輛 米制起動電機小齒輪 第1部分:通常使用的小齒輪 | Road vehicles; metric starter motor pinions; part 1: currently used pinions |
| ISO 9457-2-1994 | 道路車輛.米制起動電機小齒輪.第2部分:具有20度壓力角的小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle |
| ISO/TR 10064-1-1992 | 圓柱齒輪 實用檢驗規則 第1部分:齒輪齒面的檢驗 | Cylindrical gears; code of inspection practice; part 1: inspection of corresponding flanks of gear teeth |
| ISO/TR 10064-2 Technical Corrigendum 1-2001 | 圓柱齒輪.檢驗實施規程.第2部分:與徑向復合偏差磨損及齒厚齒隙有關的檢驗.技術勘誤1 | Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash; Technical Corrigendum 1 |
| ISO/TR 10064-2-1996 | 圓柱齒輪 實用檢驗規則 第2部分:徑向偏差、橢圓度、齒厚和齒間隙的檢驗 | Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-3-1996 | 圓柱齒輪 實用檢驗規則 第3部分:軸心圓柱的齒輪坯料、軸心距和平行度的建議 | Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TR 10064-4-1998 | 圓柱齒輪 實用檢驗規則 第4部分:表面結構和齒輪接觸斑點檢驗的建議 | Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO/TR 10064-5-2005 | 圓柱齒輪.實用檢驗規則.第5部分:與齒輪測量儀器的評價相關的建議 | Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10064-6-2009 | 檢驗實施規程.第6部分:斜齒輪測量方法 | Code of inspection practice - Part 6: Bevel gear measurement methods |
| ISO/TR 13593 Technical Corrigendum 1-2005 | 工業設施用封閉式齒輪驅動裝置.技術勘誤1 | Enclosed gear drives for industrial applications; Technical Corrigendum 1 |
| ISO/TR 13593-1999 | 工業齒輪用封閉式齒輪裝置 | Enclosed gear drives for industrial applications |
| ISO/TR 13989-1-2000 | 圓柱齒輪、錐齒輪和雙曲線齒輪嚙合承載能力的計算 第1部分:瞬現溫度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 1: Flash temperature method |
| ISO/TR 13989-2-2000 | 圓柱齒輪、錐齒輪和雙曲線齒輪嚙合承載能力的計算 第2部分:積分溫度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method |
| ISO/TR 14179-1-2001 | 齒輪 熱性能 第1部分：在95℃儲存溫度下熱平衡的額定齒輪傳動 | Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature |
| ISO/TR 14179-2-2001 | 齒輪 熱性能 第2部分：熱承載能力 | Gears - Thermal capacity - Part 2: Thermal load-carrying capacity |
| ISO/TR 18792-2008 | 工業齒輪傳動裝置的潤滑油 | Lubrication of industrial gear drives |
| 編號 | 中文名稱 | 英文名稱 |