| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 108-9-1988 | 幻燈放映機和幻燈片.直式片盒 5 x 5 - 36 和 5 x 5 - 50.第9部分:片盒外形和齒輪系統量規 | Slide projectors and slides; straight cartridge 5 × 5-36 and 5 × 5-50; gauge for cartridge profile and gear system |
| DIN 15053-1976 | 起重機.減速齒輪、連接尺寸、外形規格、輸出力矩 | Cranes; reduction gears, connecting dimensions, contour gauges, output torques |
| DIN 15074-1978 | 起重機..無齒輪帶滑動軸承的起重機凸緣導軌輪 | Cranes; flanged crane rail wheels with plain bearings, without gear wheel |
| DIN 15075-1977 | 起重機.帶齒輪的裝有關節軸承的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels, with plain bearings, with gear wheel |
| DIN 15076-1977 | 起重機.不帶齒輪的裝有關節軸承的帶輪胎的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel |
| DIN 15077-1977 | 起重機.帶滑動軸承和齒輪的帶輪箍的起重機凸緣導軌輪. | Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel |
| DIN 15078-1977 | 起重機.不帶齒輪的裝有滾子軸承的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels, with roller bearings, without gear wheel |
| DIN 15079-1977 | 起重機.帶滾柱軸承和齒輪的起重機帶凸緣導軌輪 | Cranes; flanged crane rail wheels, with roller bearings, with gear wheel |
| DIN 15080-1977 | 起重機.帶滾柱軸承、無齒輪、帶輪箍的起重機凸緣導軌輪 | Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel |
| DIN 15081-1977 | 起重機.帶滾柱軸承、齒輪、帶輪箍的起重機帶凸緣導軌輪 | Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel |
| DIN 15082-1-1977 | 起重機.軌道輪.螺旋連接的齒輪 | Cranes; crane rail wheels, screwed-on gear wheels |
| DIN 15082-2-1977 | 起重機.與大齒輪壓配合的帶滾柱軸承的起重機軌道輪 | Cranes; crane rail wheels with roller bearings, pressed-on gear wheels |
| DIN 15530-1-1981 | 35mm 膠片.輸片齒輪.主要尺寸、基準齒形 | Film 35 mm; sprockets, main dimensions, reference profile |
| DIN 15530-2-1980 | 35mm 膠片.輸片齒輪.具有標準化寬度的所有膠片用齒根直徑的規定 | Film 35 mm; sprockets, specifications for the root diameter for all films with standardized film width |
| DIN 15625-1984 | 16mm膠片.輸片齒輪.主要尺寸、弧形標準形狀 | Film 16 mm; sprockets; main dimensions, arc reference profile |
| DIN 15730-1984 | 65mm和70mm膠片.輸片齒輪.主要尺寸、弧形標準形狀 | Film 65 mm and film 70 mm; sprockets; main dimensions, arc reference profile |
| DIN 1825-1977 | 圓柱齒輪用插齒刀.直齒輪用盤形齒輪銑刀 | Pinion-type cutters for cylindrical gears; disc-gear cutters for spur gears |
| DIN 1826-1977 | 圓柱齒輪用插齒刀.直齒輪用加大轂形齒輪刀具 | Pinion-type cutters for cylindrical gears; extended hub gear cutters for spur gears |
| DIN 1828-1977 | 圓柱齒輪用插齒刀.直齒輪用帶柄齒輪刀具 | Pinion-type cutters for cylindrical gears; shank-gear cutters for spur gears |
| DIN 1829-1-1977 | 圓柱齒輪用插齒刀.設計、尺寸定義、標志 | Pinion-type cutters for cylindrical gears; design, dimensions, definitions, marking |
| DIN 1829-2-1977 | 圓柱齒輪用插齒刀.公差 | Pinion-type cutters for cylindrical gears; tolerances |
| DIN 21186-1994 | 鑿井,礦井中起吊負載的鋼索懸掛齒輪,安全性要求和試驗 | Shaft sinking; rope suspension gears for load hoisting in shafts; safety requirements and testing |
| DIN 21187-1994 | 鑿井,礦井中起吊負載的鋼鏈懸掛齒輪,安全性要求和試驗 | Shaft sinking; chain suspension gears for load hoisting in shafts; safety requirements and testing |
| DIN 28162-1-1983 | 帶旋轉機構密封的攪拌器傳動裝置用攪拌器齒輪托架 | Agitator gear stools for agitator drives with a rotating mechanical seal |
| DIN 28162-2-1983 | 帶填料蓋密封的攪拌器傳動裝置用攪拌器齒輪托架 | Agitator gear stools for agitator drives with gland sealing |
| DIN 3960 Bb.1-1980 | 漸開線圓柱齒輪和齒輪副定義.公式分類 | Definitions on involute cylindrical gears and gear pairs; classification of the equations |
| DIN 3960-1987 | 漸開線圓柱齒輪和齒輪副的定義和參數 | Definitions, parameters and equations for involute cylindrical gears and gear pairs |
| DIN 3961-1978 | 圓柱齒輪的齒公差；基礎 | Tolerances for Cylindrical Gear Teeth; Bases |
| DIN 3962-1-1978 | 圓柱齒輪嚙合公差.專用參數偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Diviations of Individual Parameters |
| DIN 3962-2-1978 | 圓柱齒輪嚙合公差.齒面線偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations |
| DIN 3962-3-1978 | 圓柱齒輪嚙合公差；齒距偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations |
| DIN 3963-1978 | 圓柱齒輪嚙合公差；操作偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Working Deviations |
| DIN 3964-1980 | 圓柱齒輪箱的軸距偏差和軸位公差 | Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears |
| DIN 3965-1-1986 | 傘齒輪嚙合公差.第1部分:基本概念 | Tolerancing of bevel gears; basic concepts |
| DIN 3965-2-1986 | 傘齒輪嚙合公差.第2部分:專用參數公差 | Tolerancing of bevel gears; tolerances for individual parameters |
| DIN 3965-3-1986 | 傘齒輪嚙合公差..第2部分:正切組合誤差用公差 | Tolerancing of bevel gears; tolerances for tangential composite errors |
| DIN 3965-4-1986 | 傘齒輪嚙合公差.第4部分:軸線夾角誤差及軸線交叉點偏差用公差 | Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations |
| DIN 3966-1-1978 | 圖紙上齒輪嚙合信息 第1部分:圓柱齒輪漸開線嚙合信息 | Information on Gear Teeth in Drawings; Information on Involute Teeth for Cylindrical Gears |
| DIN 3966-2-1978 | 圖紙上齒輪嚙合信息 第2部分:直齒傘齒輪嚙合信息 | Information on Gear Teeth in Drawings; Information on Straight Bevel Gear Teeth |
| DIN 3967-1978 | 齒輪配合體系.側隙、齒厚容差和齒厚公差.原則 | System of Gear Fits; Backlash, Tooth Thickness Allowances, Tooth Thickness Tolerances; Principles |
| DIN 3968-1960 | 漸開線正齒輪用單頭滾銑刀的公差 | Tolerances for Single-start Hobs for Involute Spur Gears |
| DIN 3970-2010 | 圓柱齒輪檢查用標準齒輪.齒輪毛坯和齒輪傳動 | Master gears for checking cylindrical gears - Gear blanks and gearing |
| DIN 3971-1980 | 傘齒輪和傘齒輪副的定義和參數 | Definitions and Parameters for Bevel Gears and Bevel Gear Pairs |
| DIN 3972-1952 | 與DIN 867相符的漸開線齒輪裝置的齒輪切削刀具的基準齒廓 | Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867 |
| DIN 3977-1981 | 圓柱齒輪齒厚測試用的半徑或直徑測量元件的直徑 | Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears |
| DIN 3979-1979 | 齒輪系輪齒損傷.名稱、特性、原因 | Tooth Damage on Gear Trains; Designation, Characteristics, Causes |
| DIN 3990-1-1987 | 圓柱齒輪承載能力的計算.引言和一般影響因素 | Calculation of load capacity of cylindrical gears; introduction and general influence factors |
| DIN 3990-11-1989 | 圓柱齒輪承載能力的計算.工業傳動應用標準.詳細方法 | Calculation of load capacity of cylindrical gears; application standard for industrial gears; detailed method |
| DIN 3990-2-1987 | 圓柱齒輪承載能力的計算.耐點蝕性能的計算 | Calculation of load capacity cylindrical gears; calculation of pitting resistance |
| DIN 3990-21-1989 | 圓柱齒輪承載能力計算.快速齒輪和類似要求齒輪的應用標準 | Calculation of load capacity of cylindrical gears; application standard for high speed gears and gears of similar requirement |
| DIN 3990-3-1987 | 圓柱齒輪承載能力的計算.齒強度計算 | Calculation of load capacity of cylindrical gears; calculation of tooth strength |
| DIN 3990-31-1990 | 圓柱齒輪承載能力計算.船用減速齒輪箱應用標準 | Calculation of load capacity of cylindrical gears; application standard for marine gears |
| DIN 3990-4-1987 | 圓柱齒輪承載能力的計算.咬接承載能力的計算 | Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity |
| DIN 3990-41-1990 | 圓柱齒輪的承載能力計算.車輛變速箱的使用標準 | Calculation of load capacity of cylindrical gears; application standard for vehicle gears |
| DIN 3990-5-1987 | 圓柱齒輪承載能力計算.疲勞極限和材料質量 | Calculation of load capacity of cylindrical gears; endurance limits and material qualities |
| DIN 3990-6-1994 | 圓柱齒輪負載能力計算.第6部分:工作強度計算 | Calculation of load capacity of cylindrical gears - Part 6: Calculation of service strength |
| DIN 3991-1-1988 | 非偏軸傘齒輪承載能力計算.引言和一般影響因數 | Calculation of load capacity of bevel gears without pinion offset; introduction and general influence factors |
| DIN 3991-2-1988 | 非偏軸傘齒輪承載能力計算.抗蝕能力計算 | Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance |
| DIN 3991-3-1988 | 非偏軸傘齒輪承載能力計算.齒根載荷能力計算 | Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength |
| DIN 3991-4-1988 | 非偏軸傘齒輪承載能力計算.第4部分:磨損載荷計算 | Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity |
| DIN 3992-1964 | 外嚙合圓柱齒輪和斜齒輪的齒頂高修正 | Addendum modification of external spur and helical gears |
| DIN 3993-1-1981 | 漸開線嚙合圓柱內齒輪副的幾何設計.基本規則 | Geometrical design of cylindrical internal involute gear pairs; Basic rules |
| DIN 3993-2-1981 | 漸開線嚙合圓柱內齒輪副的幾何設計:內小齒輪配合的幾何極限圖 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for geometrical limits of internal gear-pinion matings |
| DIN 3993-3-1981 | 漸開線嚙合圓柱內齒輪副的幾何設計:齒頂高變位系數測定圖 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for the determination of addendum modification coefficients |
| DIN 3993-4-1981 | 漸開線嚙合圓柱內齒輪副的幾何設計.內小齒輪刀具配合的幾何極限圖 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for limits of internal gear - pinion type cutter matings |
| DIN 3998 Bb.1-1976 | 齒輪和齒輪副的名稱.相同術語字母索引 | Denominations on Gears and Gear Pairs; Alphabetical Index of Equivalent Terms |
| DIN 3998-1-1976 | 齒輪和齒輪副的名稱.一般定義 | Denominations on Gears and Gear Pairs; General Definitions |
| DIN 3998-2-1976 | 齒輪和齒輪副的名稱.圓柱齒輪和齒輪副 | Denominations on Gears and Gear Pairs; Cylindrical Gears and Gear Pairs |
| DIN 3998-3-1976 | 齒輪和齒輪副的名稱.準雙曲面?zhèn)泯X輪和齒輪副 | Denominations on Gears and Gear Pairs; Bevel and Hypoid Gears and Gear Pairs |
| DIN 3998-4-1976 | 齒輪和齒輪副的名稱.蝸輪副 | Denominations on Gears and Gear Pairs; Worm Gear Pairs |
| DIN 3999-1974 | 齒輪標注方法.符號 | Gear notation; symbols |
| DIN 4000-141-2005 | 特性表.第141部分:圓柱形齒輪用帶孔或柄的滾刀 | Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears |
| DIN 4000-27-1982 | 齒輪機構產品特性圖表 | Tabular layouts of article characteristics for gear units |
| DIN 4000-59-1987 | 齒條、圓柱齒輪、小齒輪軸、傘齒輪、圓錐齒輪軸、蝸桿和蝸輪的產品特性圖表 | Tabular layouts of article characteristics for racks, cylindrical gears, pinion shafts, bevelgears, bevel pinion shafts, worms and worm wheels |
| DIN 45635-23-2003 | 機器噪聲測量.空氣噪聲發射包絡面法.第23部分:齒輪傳動 | Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson |
| DIN 45635-55-1986 | 機器排放的空氣傳播噪聲的測量.第55部分:包洛面法.磨擦輪和/或齒輪傳動調軌車 | Measurement of airborne noise emitted by machines; enveloping surface method; shunting trolleys with friction-wheel and/or gearwheel drive |
| DIN 51509-1-1976 | 齒輪潤滑劑的選擇.齒輪潤滑油 | Selection of lubricants for gears; gear lubricating oils |
| DIN 51509-2-1988 | 潤滑劑.齒輪傳動用潤滑劑的選擇.第2部分:半流體潤滑劑 | Lubricants; selection for lubricants for gears; semi-fluid lubricants |
| DIN 58400-1984 | 精密機械用漸開線圓柱齒輪基本齒形 | Basic rack for involute teeth of cylindrical gears for fine mechanics |
| DIN 58405 Bb.1-1972 | 精密加工用正齒輪傳動裝置.計算表 | Spur gear drives for fine mechanics; calculating sheet |
| DIN 58405-1-1972 | 精密機械用正齒輪傳動裝置.第1部分:適用范圍、定義、主要設計數據、分類 | Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification |
| DIN 58405-2-1972 | 精密機械用正齒輪傳動裝置.第2部分:傳動裝置配合選擇、公差、容差 | Spur Gear Drives for Fine Mechanics; Gear Fit Selection, Tolerances, Allowances |
| DIN 58405-3-1972 | 精密加工用正齒輪傳動裝置.圖樣上的標注.計算示例 | Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation |
| DIN 58405-4-1972 | 精密機械用正齒輪傳動裝置.第4部分:表格 | Spur Gear Drives for Fine Mechanics; Tables |
| DIN 58411-1987 | 模數0.1至1mm 的圓柱形精密正齒輪加工用滾銑刀. | Hobs for cylindrical fine pitch gears with modul 0,1 up to 1 mm |
| DIN 58412-1987 | 精密機構用的齒輪工具的基本齒條齒形.符合德國標準（ＤＩＮ)５８４００和(ＤＩＮ）８６７的漸開線齒輪 | Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867 |
| DIN 58413-1987 | 精密加工裝置的齒輪滾刀的公差 | Tolerances for gear hobs for fine mechanics |
| DIN 58420-1981 | 檢驗精密機械的正齒輪用的標準齒輪.齒輪毛坯及嚙合 | Master gears for checking of spur gears for fine mechanics; gear blanks and gearing |
| DIN 58425-1-1980 | 精密機械的圓齒面齒輪.第1部分:綜述、符號、術語 | Gears with round flanks for fine mechanics; survey, symbols, terms |
| DIN 58425-2-1980 | 精密機械的圓齒面齒輪.第2部分:齒形 | Gears with round flanks for fine mechanics; gear profile |
| DIN 58425-3-1980 | 精密機械的圓齒面齒輪.第3部分:機輪和傳動裝置的計算與設計 | Gears with round flanks for fine mechanics; calculation and design of wheel and pignon |
| DIN 58425-4-1980 | 精密機械的圓齒面齒輪.第4部分:傳動輪和小齒輪的公差和允許偏差 | Gears with round flanks for fine mechanics; tolerances and permissible devations for wheel and pignon |
| DIN 58425-5-1980 | 精密機械的圓齒面齒輪.第5部分:齒輪刀具的齒廓 | Gears with round flanks for fine mechanics; gear tool profile |
| DIN 58425-6-1980 | 精密機械的圓齒面齒輪.第6部分:圖樣指示 | Gears with round flanks for fine mechanics; indication on drawings |
| DIN 58425-7-1980 | 精密機械的圓齒面齒輪.第7部分:圖表 | Gears with round flanks for fine mechanics; tables, diagrams |
| DIN 68856-8-2004 | 家具用五金件.術語和定義.第8部分:推拉門齒輪 | Hardware for furniture - Terms and definitions - Part 8: Sliding door gears |
| DIN 69001-31-1981 | 機床.多軸頭.A型傳動小齒輪 | Machine tools; Multi-spindle heads; Driving pinions Type A |
| DIN 69001-43-1981 | 機床.多軸頭.A和B型小齒輪套 | Machine tools; Multi-spindle heads; Pinion sleeves Types A and B |
| DIN 69001-52-1981 | 機床.多軸頭.A型齒輪 | Machine tools; Multi-spindle heads; Gears Type A |
| DIN 72782-1-1967 | 風擋雨刮子.第1部分:雨刮子電動機.正齒輪傳動的電動機 | Windshield wipers; wiper motors, rotors with spur-gear drive |
| DIN 73011-1983 | 汽車.轎車變速齒輪箱的換檔設置 | Motor vehicles; gear lay-outs for manual transmissions in passenger cars |
| DIN 75532-1-1976 | 旋轉運動的傳動裝置.第1部分:連接齒輪、中間齒輪、撓性驅動軸與裝置的連接方式 | Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment |
| DIN 780-1-1977 | 齒輪的模數系列.直齒圓柱齒輪的模數 | Series of Modules for Gears; Modules for Spur Gears |
| DIN 780-2-1977 | 齒輪用模數系列.第2部分:圓柱蝸桿傳動裝置的模數 | Series of modules for gears; Modules for cylindrical worm gear transmissions |
| DIN 781-1973 | 機床.變速齒輪的齒數 | Machine tools; numbers of teeth of change gears |
| DIN 8000-1962 | 漸開線正齒輪加工用滾銑刀的設計尺寸與誤差.基本術語 | Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms |
| DIN 8002-1955 | 金屬切削刀具.帶離合器驅動槽或鍵槽模數為1至20 的正齒輪加工用的滾銑刀. | Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20 |
| DIN 867-1986 | 通用機械和重型機械的圓柱齒輪漸開線齒條的基準齒條齒廓 | Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering |
| DIN 868-1976 | 齒輪.齒輪副和齒輪系的一般定義和規范參數 | General Definitions and Specification Factors for Gears, Gear Pairs and Gear Trains |
| DIN 87349-1976 | 人工操作用帶傳輸管道系統的遙控傳動裝置.傘齒輪傳動裝置 | Remote control gear with transmission tubing for manual operation; bevel gear units |
| DIN 87350-1976 | 用手操作的帶傳輸管的遙控裝置.可快速旋轉的冠形齒輪裝置 | Remote control gear with transmission tubing for manual operation; crown gear units, slewable |
| DIN 87352-1978 | 手動帶傳動管的遙控傳動裝置.可回轉冠形齒輪裝置防護罩 | Remote control gear with transmission tubing for manual operation; protecting hoods for crown gear units, slewable |
| DIN 87375-1976 | 用手操作的帶傳輸管的遙控裝置.焊入式帶可快速旋轉的冠形齒輪裝置的控制板操作裝置 | Remote control gear with transmission tubing for manual operation; deck operating devices with slewable crown gear unit, welding-in type |
| DIN 87382-1980 | 手動發射管的遙控裝置.帶可回轉冠齒輪的防水的導向槽軸承 | Remote control gear with transmission tubing for manual operation; leading-trough bearings with crown gear units slewable, watertight |
| DIN EN 14203-2004 | 遮簾和百葉窗.帶手搖曲柄的齒輪使用能力.要求和試驗方法 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods; German version EN 14203:2004 |
| DIN EN ISO 10442-2005 | 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002 |
| DIN EN ISO 13691-2003 | 石油和天然氣工業.高速專用齒輪機構 | Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002 |
| DIN EN ISO 13929-2001 | 小型船舶.操舵裝置.齒輪鏈接系統 | Small craft - Steering gear - Geared link systems (ISO 13929:2001); German version EN ISO 13929:2001 |
| DIN EN ISO 4263-4-2006 | 石油和相關產品.防腐蝕礦物油和液體老化性的測定.TOST試驗.第4部分:工業齒輪油的程序(ISO 4263-4:2006) | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006); English version of DIN EN ISO 4263-4:2006-05 |
| DIN ISO 14635-1 Berichtigung 1-2007 | 齒輪.FZG試驗規程.第1部分:有關齒輪咬接油的載重量的FZG試驗方法A/8,3/90 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05 |
| DIN ISO 14635-1-2006 | 齒輪.FZG試驗程序.第1部分:測試齒輪油壓塑性變形承載能力用的A/8、3/90 FZG試驗方法 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000)English version of DIN ISO 14635-1:2006-05 |
| DIN ISO 2203-1976 | 技術制圖.齒輪的傳統表示法 | Technical Drawings; Conventional Representation of Gears |
| DIN ISO 3952-2-1995 | 運動學簡易表示法.第2部分:摩檫機構、齒輪機構和凸輪機構表示法; 等同采用 ISO 3952-2:1981 | Simplified representation for kinematics - Part 2: Representation of friction and gear mechanisms and cam mechanisms; identical with ISO 3952-2:1981 |
| DIN ISO 7646-1987 | 商用車輛和汽車.齒輪箱法蘭.A型. 與ISO 7646, 1986版相同 | Commercial vehicles and buses; gearbox flanges; type A; identical with ISO 7646, edition 1986 |
| DIN ISO 7647-1987 | 商用車輛和汽車.齒輪箱法蘭.S型.與ISO 7647, 1986版相同 | Commercial vehicles and buses; gearbox flanges; type S; identical with ISO 7647, edition 1986 |
| DIN ISO 8123-1997 | 道路車輛.起動發動機徑節小齒輪 | Road vehicles - Diametral pitch starter motor pinions (ISO 8123:1991) |
| DIN ISO 8667-1993 | 商用車輛和大客車.T型十字齒齒輪箱法蘭 | Commercial vehicles and buses; cross-tooth gearbox flanges, type T; identical with ISO 8667:1992 |
| DIN ISO 8719-1988 | 商用車輛和客車.齒輪傳動的空氣壓縮機用的四孔法蘭盤 | Commercial vehicles and buses; four-hole flanges for gear-driven air compressors; identical with ISO 8719, edition 1986 |
| DIN ISO 9457-1-1997 | 道路車輛.米制起動器電動機小齒輪.第1部分:普通小齒輪 | Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions (ISO 9457-1:1991) |
| DIN ISO 9457-2-1997 | 道路車輛.米制起動器電動機小齒輪.第2部分:20度壓力角小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994) |
| 編號 | 中文名稱 | 英文名稱 |