| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI MH26.2-2007 | 焊接線架蓋板的設計、測試和利用 | Design, Testing, and Utilization of Welded-Wire Rack Decking |
| ANSI Z49.1-2005 | 焊接、切割和相關工藝中的安全 | Welding, Cutting and Allied Processes, Safety in |
| ANSI/API 1104-1999 | 管道和相關設施的焊接 | Welding of Pipelines and Related Facilities |
| ANSI/API 599-2002 | 金屬塞閥.法蘭和焊接端 | Metal Plug Valves - Flanged and Welding Ends |
| ANSI/ASME B16.11-2009 | 焊接螺紋承口鍛造管件 | Forged Fittings, Socket-Welding and Threaded |
| ANSI/ASME B16.22-2001 | 鍛銅和銅合金釬焊接壓力連接件 | Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings |
| ANSI/ASME B16.25-2007 | 對接焊接端 | Buttwelding Ends |
| ANSI/ASME B16.34-2009 | 法蘭,螺紋和焊接端連接的閥門 | Valves - Flanged, Threaded, and Welding End |
| ANSI/ASME B29.200-2001 | 焊接鋼型滾軋鏈條.焊接鋼牽引鏈.附件和鏈輪齒 | Welded-Steel-Type Mill Chains, Welded-Steel-Type Drag Chains, Attachments, and Sprockets |
| ANSI/ASME B36.10M-2004 | 焊接鍛鋼管和無縫鍛鋼管 | Welded and Seamless Wrought Steel Pipe |
| ANSI/ASME BPVCSection IX-2010 | 焊接和釬焊質量(5/12/09和2/5/09 會議) | Welding and Brazing Qualifications (5/12/09 and 2/5/09 Meeting) |
| ANSI/ASTM A249/A 249M-2001 | 焊接奧氏體鋼鍋爐、過熱器、熱交換器和冷凝器管規范 | Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ANSI/ASTM A312/A 312M-2001 | 無縫和焊接奧氏體不銹鋼管規范 | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| ANSI/ASTM A500-2001 | 圓鋼與型鋼的冷變形焊接與無縫碳素鋼結構管規范 | Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ANSI/ASTM A688/A 688M-2001 | 奧氏體不銹鋼焊接給水加熱器管規范 | Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ANSI/ASTM A704-1996 | 混凝土加筋用焊接普通鋼棒或鋼桿規范 | Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| ANSI/ASTM A789/A 789M-2001 | 普通設備用無縫與焊接鐵素體/奧氏體不銹鋼管規范 | Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| ANSI/ASTM A814/A 814M-2001 | 冷加工焊接奧氏體不銹鋼管規范 | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
| ANSI/ASTM B546-1998 | 電熔焊接鎳鉻鈳鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330 and UNS N08332)、 鎳鉻鐵合金(UNS N06025)和 | Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ANSI/ASTM B619-2000 | 焊接用鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ANSI/ASTM B626-2001 | 焊接鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B705-2000 | 鎳合金焊接管規范 | Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe |
| ANSI/ASTM B710-1999 | 鎳鐵鉻硅合金焊接管規范 | Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe |
| ANSI/ASTM B725-1996 | 焊接鎳(UNS N02200/UNS No2201)和鎳銅合金(UNS N04400)管規范 | Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe |
| ANSI/ASTM B730-1996 | 焊接鎳和鎳銅合金管(UNS N04400)規范 | Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube |
| ANSI/ASTM B742-1990 | 電焊接點用已加工優質銀材料規范 | Specification for Fine Silver Electrical Contact Fabricated Material |
| ANSI/ASTM B804-1996 | UNS N08367和UNS N08926焊接管規范 | Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ANSI/ASTM F1074-1997 | 焊接喇叭型繩栓規范 | Specification for Cleats, Welded Horn Type |
| ANSI/ASTM F1076-1997 | 管用擴張焊接及銀黃銅套管連接件慣例 | Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ANSI/ASTM F1145-1997 | 冷鍛、焊接、鍛制松緊螺紋扣規范 | Specification for Turnbuckles, Swaged, Welded, Cast, Forged |
| ANSI/ASTM F1199-1988 | 鑄造(所有溫度和壓力)和焊接管線濾網(150 psig和150°F最大值)的規范 | Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ANSI/ASTM F1200-1988 | 裝配式(焊接)管線濾網(大于150 psig和150°F)規范 | Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ANSI/ASTM F1934-1998 | 焊接背包或登山帳篷試驗方法 | Test Method for Welding a Backpack or Mountaineering Tent |
| ANSI/ASTM F722-1982 | 船上管道系統用焊接接頭規范 | Specification for Welded Joints for Shipboard Piping Systems |
| ANSI/AWS A1.1-2001 | 焊接工業的米制實施規程指南 | Metric Practice Guide for the Welding Industry |
| ANSI/AWS A10.1M-2007 | 單相AC電阻焊接用次級電流傳感線圈和焊接電流監視器校正和性能試驗規范 | Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single Phase AC Resistance Welding |
| ANSI/AWS A2.4-2007 | 焊接、銅焊和無損檢測用標準符號 | Standard Symbols for Welding, Brazing, and Nondestructive Examination |
| ANSI/AWS A3.0M/A 3.0-2009 | 標準焊接術語和定義 | Standard Welding Terms and Definitions |
| ANSI/AWS A4.3-1993 | 測定馬氏體、貝氏體和鐵素體鋼電弧焊接金屬中可擴散氫含量的標準方法 | Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding |
| ANSI/AWS A4.4M-2001 | 焊接助熔劑和電焊條助熔劑涂層含水量標準測定程序 | Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
| ANSI/AWS A5.01M/A 5.01-2008 | 焊接消耗品及相關工藝用程序指南.助熔劑和氣體保護電焊接工藝 | Procurement Guidelines for Consumables-Welding and Allied Processes - Flux and Gas Shielded Electrical Welding Processes |
| ANSI/AWS A5.1/A 5.1M-2003 | 電弧焊接碳鋼涂料焊條規范 | Carbon Steel Covered Arc-Welding Electrodes, Specification for |
| ANSI/AWS A5.11/A 5.11M-2010 | 保護金屬電弧焊用鎳和鎳合金焊接電極規范 | Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.2/A 5.2M-2007 | 氧燃料氣焊接的碳鋼和低合金鋼棒材的規范 | Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding |
| ANSI/AWS A5.24/A 5.24M-2004 | 鋯和鋯合金焊接電極和焊條規范 | Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.32/A 5.32M-1997 | 焊接保護氣體規范 | Specifications for Welding Shielding Gases |
| ANSI/AWS A5.34/A 5.34M-2007 | 助熔劑芯電弧焊接用鎳合金電極的規范 | Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding |
| ANSI/AWS A5.4/A 5.4M-2006 | 屏蔽金屬電弧焊不銹鋼焊接電極 | Stainless Steel Welding Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.9/A 5.9M-2006 | 裸露不銹鋼焊接電極和焊棒規范 | Specification for Bare Stainless Steel Welding Electrodes and Rods |
| ANSI/AWS B1.10-2009 | 焊接非破壞性檢驗指南 | Guide for the Nondestructive Examination of Welds |
| ANSI/AWS B2.1-1-001-2006 | 在焊接條件下有墊板的3/16～3/4英寸厚的(M-1/P-1、1或2組)碳鋼的屏蔽金屬電弧焊的標準焊接程序規范(WPS) | Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing |
| ANSI/AWS B2.1-1-002-2006 | 焊接條件下、有或沒有墊板的3/16～ 7/8英寸(M-1/P-1)1或2組碳鋼的氣態鎢電弧焊的標準焊接程序規范(WPS) | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing |
| ANSI/AWS B2.1-1-003-2002 | 在焊接條件下、有或沒有墊板、10到18規格的鍍鋅鋼的氣體保護金屬極電弧焊 | Gas Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-004-2002 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼(M1,組1)的氣體保護金屬極電弧焊 | Gas Metal Arc Welding of Carbon Steel (M1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-007-2002 | 在焊接條件下、有或沒有墊板、10到18規格的鍍鋅鋼的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-008-2002 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼(M1,組1)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-011-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的鍍鋅鋼的保護金屬焊條電弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-012-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的碳鋼(M1,組1)的保護金屬焊條電弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-016-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E7018碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-017-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E6010碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-018-2005 | 在焊接條件下1/8到1-1/2英尺厚E71T-8碳鋼的自保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或 | Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E71T-8, As-Welded Condition |
| ANSI/AWS B2.1-1-019-2005 | 在焊接條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的CO2保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1 | Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition |
| ANSI/AWS B2.1-1-019-94-AMD 1-2010 | 在焊接條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的CO2保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1 | Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition |
| ANSI/AWS B2.1-1-020-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的75%Ar/25%CO2保護助溶劑芯電弧焊的標準焊接程序規 | Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-020-94-AMD 1-2010 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的75%Ar/25%CO2保護助溶劑芯電弧焊的標準焊接程序規 | Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-021-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚ER70S-2和E7018碳鋼的保護金屬電弧焊和鎢電極惰性氣體保護電弧焊的標準 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-022-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E7018和E6010(垂直上升)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)( | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-026-2005 | 在焊接或PWHT條件下1/8到1-1/2英尺厚E7018和E6010(垂直下降)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)( | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-201-2007 | 主要管道用焊接條件下E6010(垂直向上)及E7018(垂直向上)1/8～3/4英寸厚碳鋼(M-1/P-1/S-1,組1或組2)的鎧裝金 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applic |
| ANSI/AWS B2.1-1-202-2007 | 主要用于管道的、在焊接條件下,1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳鋼(M-1/P-1/S-1,1或2組 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Appl |
| ANSI/AWS B2.1-1-203-2007 | 焊接條件下,有或沒有墊板,18規格鍍鋅鋼(M-1)的氣體金屬電弧焊(短循環傳輸模式)的標準焊接程序規范(WPS) | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through Gauge, in the As-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-204-2007 | 主要用于管道的、在焊接條件下,1/8到3/4英寸厚、E6010(底部垂直向下和垂直向上達到平衡)碳鋼(M-1/P-1/S-1,1 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Ap |
| ANSI/AWS B2.1-1-205-2007 | 主要管道用焊接或PWHT條件下E6010(垂直向上)及E7018(垂直向上)1/8～1-1/2英寸厚碳鋼(M-1/P-1/S-1,組1或組2) | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, (Primarily |
| ANSI/AWS B2.1-1-206-2007 | 帶或不帶襯板焊接條件下18～10規格碳鋼與奧氏體不銹鋼(M-1～M-8、P-8或S-8)的氣體保護金屬極電弧焊用標準焊 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Weldign (Short Circuiting Transfer Mode) of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-207-2007 | 主要管道用焊接或PWHT條件下1/8～1-1/2英寸厚ER70S-2碳鋼(M-1/P-1/S-1,組1或組2)的鎢電極惰性氣體保護焊用 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As-Welded or PWHT Condition (Primarily Pipe Applications) |
| ANSI/AWS B2.1-1-208-2007 | 主要管道用焊接或PWHT條件下1/8～1-1/2英寸厚E7018碳鋼(M-1/P-1/S-1,組1或組2)的屏蔽金屬電弧焊用標準焊接 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-209-2006 | 主要用于管道的、在焊接或PWHT條件下、1/8到1-1/2英寸厚、ER70S-2和E7018碳鋼(M-1/P-1/S-1,1或2組)的屏蔽金 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pip |
| ANSI/AWS B2.1-1-210-2001 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-211-2001 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded |
| ANSI/AWS B2.1-1-232-2006 | 主要管道設施僅平面位置焊接或PWHT條件下用ER70S-3和E7XT-X型1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2組碳鋼的氬 | Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1)Group |
| ANSI/AWS B2.1-1-233-2006 | 僅平面位置焊接或PWHT條件下用ER70S-3型1～1/2英寸厚(M-1/P-1/S-1)1或2組碳鋼的氬氣加25%二氧化碳氣體保護 | Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P |
| ANSI/AWS B2.1-1-234-2006 | 焊接或PWHT情況的主要管道設施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2組、E7XT-X型碳鋼用氬氣加25%二氧化碳的 | Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applicaitons |
| ANSI/AWS B2.1-1-235-2006 | 平面位置焊接或PWHT情況的主要管道設施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2組、ER70S-3型碳鋼的氬氣加2%氧 | Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condi |
| ANSI/AWS B2.1-1/8-006-2002 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的氣體保護金屬極電弧焊 | Gas Metal Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-18, or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-010-2002 | 在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-014-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的保護金 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-228-2002 | 碳鋼與奧氏體不銹鋼屏蔽金屬電弧焊(從M-1/P-1/S-1,組1或組2焊接到M-8/P-8/S-8, 組1)1/8到1-1/2英寸厚,ER309 | Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primari |
| ANSI/AWS B2.1-1/8-229-2002 | 碳鋼與奧氏體不銹鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2英寸厚ER30 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded C |
| ANSI/AWS B2.1-1/8-230-2002 | 氣體保護鎢極弧焊的標準焊接程序規范(WPS),可熔嵌入根部的,碳鋼與奧氏體不銹鋼(M-1/P-1/S-1, 組 1 和 2 焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and |
| ANSI/AWS B2.1-1/8-231-2002 | 帶可熔嵌入焊條的碳鋼與奧氏體不銹鋼氣體保護鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1) | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through |
| ANSI/AWS B2.1-4-217-2009 | 主要管路用焊接后狀態ER80S-B2,1/8至1/2英寸厚,焊后熱處理狀態1/8至3/4英寸厚的鎢鉻鉬鋼氣體弧焊(M-4/P-4,1 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-218-1999 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT條件下、(M-4/P-4/S-4,1或2組)E8018- | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-219-1999 | 氣體保護鎢極弧焊以及鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在焊接條件下1/8到12 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E8018-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-220-1999 | 標準焊接程序規范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-4/P-4/S-4, | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-221-1999 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, IN515, ER80S-B2, and E8018-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-222-1999 | 鉻鉬鋼氣體保護鎢極弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 90S-BS,1/8到1/2英寸厚或在PWHT條件 | Standard Welding Procedure Specification (WPS)for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-223-1999 | 鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 9018-BS,1/8到1/2英寸厚或在PWHT條件下 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-224-1999 | 氣體保護鎢極弧焊以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下1/8到1/2英寸厚或在P | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-225-1999 | 標準焊接程序規范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-5A或P-5A)1/ | Standard Welding Procedure Specification (WPS)for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-226-1999 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-005-2002 | 在焊接條件下、有或沒有墊板、10到18規格的奧氏體不銹鋼(M-8或P-8)的氣體保護金屬極電弧焊 | Gas Metal Arc Welding of Austentic Stainless Steel (M-8 or P-8) 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-009-2002 | 在焊接條件下、有或沒有墊板、10到18規格的不銹鋼(M-8或P-8)的鎢電極惰性氣體保護焊 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-013-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的奧氏體不銹鋼(M-8/P-8)的保護金屬電弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Austenitic – Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-023-2005 | 在焊接條件下1/8到1-1/2英尺厚奧氏體不銹鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-8/P-8/S-8,1組) | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition |
| ANSI/AWS B2.1-8-024-2001 | 在焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保護焊的焊接程序規范(WP | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-025-2001 | 在焊接條件下、保護金屬電弧焊之后的1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-212-2001 | 主要用于管道的、在ERXX焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-213-1997 | 主要用于管道的、在焊接條件下(M-8/P-8/S-8,組)1/8到1-1/2英寸E3XX-XX奧氏體不銹鋼的藥皮焊條電弧焊的標準 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-214-2001 | 標準焊接程序規范(WPS).主要用于管道的,在焊接條件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奧氏體不銹鋼(M-8/P | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-215-2001 | 在 IN3XX和ER3XX焊接條件下、1/8到1-1/2英寸厚的自耗嵌入式奧氏體不銹鋼(M-8/P-8/S-8,組1)鎢電極惰性氣體保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition |
| ANSI/AWS B2.1-8-216-2001 | 標準焊接程序規范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奧氏體不銹鋼(M-8/P-8/S-8,組1)的 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition |
| ANSI/AWS B2.1.22-015-2002 | 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格鋁(M-22或P-22)的鎢電極惰性氣體保護焊 | Standard Welding Procedure Specification – Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1/B 2.1M-2008 | 焊接工藝和性能認證用規范 | Specification for Welding Procedure and Performance Qualification |
| ANSI/AWS B2.3-2007 | 軟釬焊接方法和性能合格規范 | Specification for Soldering Procedure and Performance Qualification |
| ANSI/AWS B2.4-2006 | 焊接工藝和熱塑性塑料性能認證的規范 | Specification for Welding Procedure and Performance Qualification for Thermoplastics |
| ANSI/AWS B5.1-2003 | 焊接檢驗員的資格認證規范 | Specification for the Qualification of Welding Inspectors |
| ANSI/AWS B5.14-2009 | 焊接銷售代表資質鑒定規范 | Specification for the Qualification of Welding Sales Representatives |
| ANSI/AWS B5.16-2006 | 焊接工程師資格認可規范 | Specification for the Qualification of Welding Engineers |
| ANSI/AWS B5.17-2008 | 焊接加工人員資格鑒定用規范 | Specification for the Qualification of Welding Fabricators |
| ANSI/AWS B5.2-2001 | 焊接檢驗專業人員和焊接檢驗助理人員資質規范 | Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants |
| ANSI/AWS B5.5-2000 | 焊接教員的資格認定 | Specification for the Qualification of Welding Educators |
| ANSI/AWS B5.9-2006 | 焊接監理資質規范 | Specification for the Qualification of Welding Supervisor |
| ANSI/AWS C1.1M/C 1.1-2000 | 電阻焊接推薦慣例 | Recommended Practices for Resistance Welding |
| ANSI/AWS C1.4M/C 1.4-2009 | 碳鋼和低合金鋼的電阻焊接規范 | Specification for Resistance Welding of Carbon and Low-Alloy Steels |
| ANSI/AWS C1.5-2008 | 電阻焊接技術員認證規范 | Specification for the Qualification of Resistance Welding Technician |
| ANSI/AWS C3.2M/C 3.2-2008 | 評定硬釬焊接頭強度的標準方法 | Standard Methods for Evaluating the Strength of Brazed Joints |
| ANSI/AWS C3.8M/C 3.8-2005 | 黃銅焊接縫的超聲檢驗推薦實施規程 | Recommended Practices for the Ultrasonic Examination of Brazed Joints |
| ANSI/AWS C5.10/C 5.10M-2003 | 焊接和等離子體電弧切割用保護氣的推薦規程 | Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting |
| ANSI/AWS C6.1-2009 | 摩擦焊接的推薦實施規程 | Recommended Practices for Friction Welding |
| ANSI/AWS C6.2/C 6.2M-2006 | 金屬焊接摩擦的合格和規范 | Specification for Qualification of Friction Welding of Metals |
| ANSI/AWS C7.1-1992 | 電子束焊接的推薦實施規程 | Recommended Practices for Electron Beam Welding |
| ANSI/AWS C7.3-1999 | 電子束焊接工藝規范 | Process Specification for Electron Beam Welding |
| ANSI/AWS C7.4/C 7.4M-2008 | 激光束焊接操作人員資格鑒定的程序規范 | Process Specification and Operator Qualification for Laser Beam Welding |
| ANSI/AWS D1.1/D 1.1M-2010 | 結構焊接代碼.鋼 | Structural Welding Code - Steel |
| ANSI/AWS D1.2/D 1.2M-2008 | 結構焊接規則.鋁 | Structural Welding Code - Aluminum |
| ANSI/AWS D1.3/D 1.3M-2007 | 結構焊接規則.薄鋼板 | Structural Welding Code - Sheet Steel |
| ANSI/AWS D1.4-1997 | 增強鋼結構焊接規程 | Structural Welding Code - Reinforcing Steel |
| ANSI/AWS D1.4/D 1.4M-2005 | 結構焊接規范.鋼筋 | Structural Welding Code - Reinforcing Steel |
| ANSI/AWS D1.5M/D 1.5-2007 | 橋梁焊接規則 | Bridge Welding Code |
| ANSI/AWS D1.6-2007 | 鋼結構焊接規范.不銹鋼 | Structural Welding Code - Stainless Steel |
| ANSI/AWS D1.8/D 1.8M-2009 | 結構焊接規范.地震增補 | Structural Welding Code - Seismic Supplement |
| ANSI/AWS D1.9/D 1.9M-2007 | 結構焊接代碼.鈦 | Structural Welding Code - Titanium |
| ANSI/AWS D10.11M/D 10.11-2007 | 焊接無背襯管的根部焊道指南 | Guide for Root Pass Welding of Pipe Without Backing |
| ANSI/AWS D10.12M/D 10.12-2000 | 焊接低碳鋼管指南 | Guide for Welding Mild Steel Pipe |
| ANSI/AWS D10.18M/D 10.18-2008 | 鐵素體/奧氏體雙相不銹鋼管和管道的焊接指南 | Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing |
| ANSI/AWS D10.4-1986 | 焊接奧氏體鉻鎳不銹鋼管推薦慣例 | Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for |
| ANSI/AWS D11.2-2006 | 鐵鑄件焊接指南 | Guide for Welding Iron Castings |
| ANSI/AWS D14.1/D 14.1M-2005 | 工業和工廠用起重機及其它物料運輸設備的焊接規范 | Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
| ANSI/AWS D14.3/D 14.3M-2005 | 焊接、土方、建筑和農業設備的規范 | Specification for Welding, Earthmoving, Construction, and Agricultural Equipment |
| ANSI/AWS D14.4/D 14.4M-2005 | 機械和設備焊接接頭規范 | Specification for Welded Joints in Machinery and Equipment |
| ANSI/AWS D14.5/D 14.5M-2009 | 壓力機和壓力元件焊接規范 | Specification for Welding of Presses and Press Components |
| ANSI/AWS D14.6-2004 | 設備的旋轉元件的焊接規范 | Specification for Welding of Rotating Elements of Equipment |
| ANSI/AWS D15.1/D 15.1M-2007 | 汽車和機車用鐵路焊接規范 | Railroad Welding Specification for Cars and Locomotives |
| ANSI/AWS D15.2-2003 | 鐵路車輛用軌道和相關軌道元件焊接的推薦實施規范 | Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles |
| ANSI/AWS D16.1M/D 16-2004 | 機器人電弧焊接安全規范 | Specification for Robotic Arc Welding Safety |
| ANSI/AWS D16.1M/D 16.1-2004 | 機器人電弧焊接安全規范 | Specification for Robotic Arc Welding Safety |
| ANSI/AWS D16.2M/D 16.2-2007 | 機器人和自動焊接的元部件 | Components of Robotic and Automatic Welding |
| ANSI/AWS D16.3M/D 16.3-2008 | 機器人焊接用風險評估指南 | Risk Assessment Guide for Robotic Welding |
| ANSI/AWS D17.2/D 17.2M-2007 | 航空航天用點和縫電阻焊接的規范 | Specification for Aerospace Spot and Seam Resistance Welding |
| ANSI/AWS D18.1/D 18.1M-2009 | 衛生設施中管和管道系統焊接規范 | Specification for Welding of Tube and Pipe Systems in Sanitary (Hygienic) Applications |
| ANSI/AWS D18.3/D 18.3M-2005 | 衛生用途的槽罐、容器和其他設備的焊接規范 | Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications |
| ANSI/AWS D3.5-1993 | 鋼船殼結構焊接指南 | Steel Hull Welding, Guide for |
| ANSI/AWS D3.6M-1999 | 水下焊接 | Underwater Welding |
| ANSI/AWS D3.7-2004 | 鋁制船體焊接指南 | Guide for Aluminum Hull Welding |
| ANSI/AWS D3.9-2010 | 經過油漆底漆的焊接點分類用規范 | Specification for Classification of Weld-Through Paint Primers |
| ANSI/AWS D8.14M-2008 | 自動焊接質量規范.鋁弧焊 | Specification for Automotive Weld Quality - Arc Welding of Aluminum |
| ANSI/AWS D8.1M-2007 | 汽車的焊接質量規范.鋼的接觸點焊 | Specification for Automotive Weld Quality - Resistance Spot Welding of Steel |
| ANSI/AWS D8.7-2004 | 汽車焊接質量的推薦實施規程.電阻點焊 | Recommended Practice for Automotive Weld Quality – Resistance Spot Welding |
| ANSI/AWS D9.1M/D 9.1-2006 | 金屬薄板焊接代碼 | Sheet Metal Welding Code |
| ANSI/AWS F1.1M-2006 | 焊接和有關工藝過程產生的懸浮顆粒的取樣方法 | Method for Sampling Airborne Particulates Generated by Welding and Allied Processes |
| ANSI/AWS F1.2-2006 | 焊接和有關工藝中測量煙霧形成速度和總煙霧排放量的實驗室方法 | Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes |
| ANSI/AWS F1.3M-2006 | 焊接環境污染評定的取樣方法指南 | A Sample Strategy Guide for Evaluating Contaminants in the Welding Environment |
| ANSI/AWS F1.5M-2003 | 焊接和類似工藝用的氣體取樣和分析方法 | Sampling and Analyzing Gases from Welding and Allied Processes, Methods for |
| ANSI/AWS F1.6-2003 | 環境保護局(EPA)評價焊接排放物的指南和通風許可報告 | Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting |
| ANSI/AWS F2.3M-2001 | 透明焊接簾門和簾幕的使用和性能規范 | Specification for Use and Performance of Transparent Welding Curtains and Screens |
| ANSI/AWS F3.2M/F 3.2-2001 | 焊接煙塵通風指南 | Ventilation Guide for Weld Fume |
| ANSI/AWS F4.1-2007 | 容器和管道焊接和切割準備的推薦安全規程 | Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
| ANSI/AWS G1.2M/G 1.2-1999 | 熱塑性塑料標準化超聲焊接試件規范 | Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics |
| ANSI/AWS G1.6-2006 | 熱氣焊擠壓和加熱工具對塑料焊接檢驗師資格規范 | Specification for the Qualification of Plastics Welding Inspectors for Hot Gas Extrusion, and Heated Tool Blutt Thermoplastic Welds |
| ANSI/AWWA D100-2005 | 儲水用碳素鋼焊接箱 | Welded Carbon Steel Tanks for Water Storage |
| ANSI/CEMA 501.1-2003 | 焊接鋼翼輪規范 | Specifications for Welded Steel Wing Pulleys |
| ANSI/CEMA B105.1-2009 | 焊接鋼傳輸滑輪 | Welded Steel Conveyor Pulleys |
| ANSI/EIA 448-19A-2000 | 機電元件的試驗標準.用氣相系統法確立機械焊接的環境效應 | Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System |
| ANSI/EIA 448-21A-2000 | 機電元件的試驗標準.開關.用紅外系統法確定機械焊接的交替環境效應 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA 448-22-1990 | 耐焊接熱的焊接試驗方法 | Resistance to Soldering Heat, Soldering Method |
| ANSI/EIA 448-2A-2000 | 機電元件的試驗標準.機械焊接的環境效應 | Test Standard for Electromechanical Components Environmental Effects of Machine Soldering |
| ANSI/EIA 638-1995 | 表面的可焊接性試驗 | Surface Mount Solderability Test |
| ANSI/EIA 654-2000 | 電線和電氣元件耐焊接熱試驗程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/EIA-364-47A-2001 | 非焊接纏繞的電連接器用導體非纏繞試驗程序 | Conductor Unwrap Test Procedure for Solderless Wrapped Electrical Contacts |
| ANSI/EIA-654-2000 | 電線和電器元件耐焊接熱試驗程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/FM 4950-2007 | 熱加工用焊接墊、焊接毯和焊接護簾 | Welding Pads, Welding Blankets and Welding Curtains for Hot Work Operations |
| ANSI/IPC J-STD-001D-2005 | 焊接的電氣和電子組件的要求 | Requirements for Soldered Electrical and Electronic Assemblies |
| ANSI/ISA 75.08.03-2001 | 承插焊接端和螺旋端球型控制閥的端面間尺寸(ANSI類型150、300、600、900、1500和2500) | Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S75.08.03-2001 | 承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸 | Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/NAAMM MBG533-2009 | 鋼,鋁預制件和不銹鋼棒格柵的焊接標準 | Welding Standard for Fabrication of Steel, Aluminum, and Stainless Steel Bar Grating |
| ANSI/NFPA 51-2006 | 焊接、切割和相關工藝用氧燃料氣系統的設計和安裝用標準 | Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes |
| ANSI/NFPA 51B-2009 | 焊接、切削和其它熱加工防火標準 | Standard for Fire Prevention During Welding, Cutting, and Other Hot Work |
| ASME B16.11-2001 | 鍛制承插焊接和螺紋配件 | (Forged fittings, socket-welding and threaded) |
| ASME B16.34-1996 | 閥門.法蘭、螺紋和焊接端 | (Valves - Flanged, threaded, and welding end) |
| ASME B16.34a Addenda-1998 | 帶螺紋的法蘭式閥門和焊接端.附錄 | (Valves - Flanged, threaded, and welding end; Addenda) |
| ASME B29.16M-1995 | 焊接鋼型碾磨機鏈、附件和鏈輪齒 | (Welded steel type mill chains, attachments, and sprocket teeth) |
| ASME B29.18M-1993 | 焊接鋼型牽引鏈、附件和鏈輪齒 | (Welded steel-type drag chains, attachments, and sprocket teeth) |
| ASME B29.21M-1996 | 水、污水處理設備用700級焊接鋼和鑄造鏈,附件及鏈輪 | (700 class welded steel and cast chains, attachments and sprockets for water and sewage treatment plants) |
| ASME BPVC Section 9-2001 | ASME鍋爐和壓力容器規則.第9節:焊接和釬焊合格 | (ASME Boiler & Pressure Vessel Code - Section 9: Welding and Brazing Qualifications) |
| ASTM A1012-2002(2007) | 無縫和焊接鐵素體、奧氏體和雙合金鋼冷凝器和帶整體散熱片的熱交換器管的標準規范 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM A1064/A1064M-2009 | 鋼絲繩和焊接線纜加固的技術標準規范,混凝土的平整和變形 | Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM A185/A185M-2007 | 混凝土用普通焊接鋼絲網標準規范 | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
| ASTM A214/A214M-1996(2005) | 熱交換器和冷凝器用電阻焊接碳鋼管的標準規范 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A249/A249M-2010 | 焊接奧氏體鋼鍋爐、過熱器、熱交換器和冷凝器管的標準規范 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ASTM A268/A268M-2010 | 一般用途的無縫和焊接鐵素體與馬氏體不銹鋼管標準規范 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| ASTM A269-2010 | 通用無縫和焊接奧氏體不銹鋼管標準規范 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| ASTM A270/A270M-2010 | 衛生設施用無縫鋼和焊接奧氏體不銹鋼管的標準規范 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
| ASTM A312/A312M-2009 | 無縫焊接重冷處理奧氏體不銹鋼管標準規范 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A333/A333M-2010 | 低溫設備用無縫和焊接鋼管的標準規范 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
| ASTM A409/A409M-2009 | 腐蝕性或高溫條件用焊接大直徑奧氏體鋼管標準規范 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM A423/A423M-2009 | 無縫和電焊接低合金鋼管的標準規范 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
| ASTM A488/A488M-2010 | 鋼鑄件焊接規程和工作人員的合格鑒定的標準規程 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM A498-2006 | 帶整體散熱片的無縫焊接碳鋼熱交換管的標準規范 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
| ASTM A500/A500M-2010 | 圓形與異型冷成型焊接與無縫碳素鋼結構管標準規范 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A501-2007 | 熱成型焊接與無縫碳素鋼結構管的標準規范 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A53/A53M-2007 | 無縫焊接、含鋅涂層、黑色熱浸鍍鋼管標準規范 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A554-2010 | 焊接的不銹鋼機械管用標準規范 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| ASTM A688/A688M-2010 | 焊接奧氏體不銹鋼給水加熱器管用標準規范 | Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ASTM A724/A724M-2009 | 制作焊接層壓容器用淬火加回火的碳錳硅壓力容器鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| ASTM A758/A758M-2009 | 改良缺口韌性的鍛造碳鋼柄焊接管配件的標準規范 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| ASTM A774/A774M-2009 | 低溫和中等溫度條件下的一般腐蝕性服務用焊接鍛造奧氏體不銹鋼配件標準規范 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| ASTM A790/A790M-2009a | 無縫與焊接鐵素體/奧氏體不銹鋼管的標準規范 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| ASTM A803/A803M-2010 | 焊接鐵素體不銹鋼給水加熱器管用標準規范 | Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
| ASTM A813/A813M-2009 | 單或雙焊接奧氏體不銹鋼管的標準規范 | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
| ASTM A860/A860M-2009 | 鍛造的高強度低合金鋼焊接柄接的標準規范 | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
| ASTM A865/A865M-2006 | 鋼管連接用黑色或鍍鋅(電鍍)焊接或無縫鋼螺紋接頭標準規范 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A933/A933M-2007 | 加固用乙烯基(PVC)鍍層鋼絲和焊接鋼絲網的標準規范 | Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
| ASTM A952/A952M-2002(2010) | 鍛造80級和100級鋼提升組件和焊接附件鏈接件用標準規范 | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
| ASTM B338-2010 | 冷凝器和熱交換器用無縫和焊接鈦及鈦合金管標準規范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B353-2007 | 核設施(核燃料覆層除外)用鍛制鋯及鋯合金無縫與焊接管的標準規范 | Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding) |
| ASTM B363-2006a | 無縫和焊接的非合金鈦及鈦合金焊接配件標準規范 | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
| ASTM B447-2007 | 焊接銅管的標準規范 | Standard Specification for Welded Copper Tube |
| ASTM B521-1998(2004) | 鉭和鉭合金無縫和焊接管標準規范 | Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes |
| ASTM B608-2007 | 焊接銅合金管的標準規范 | Standard Specification for Welded Copper-Alloy Pipe |
| ASTM B619-2006 | 焊接的鎳和鎳鈷合金管的標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ASTM B626-2006 | 焊接鎳和鎳鈷合金管標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ASTM B640-2007 | 空調及制冷設備用焊接銅管標準規范 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
| ASTM B673-2005e1 | UNS N08925、UNS N08354和UNS N08926焊接管的標準規范 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM B674-2005 | UNS N08925、UNS N08354和UNS N08926焊接管的標準規范 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube |
| ASTM B675-2002(2007) | UNS NO8367焊接管標準規范 | Standard Specification for UNS N08367 Welded Pipe |
| ASTM B726-2002(2006) | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B757-2000(2006) | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B758-2000(2006) | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B804-2002(2007) | UNS N08367和UNS N08926焊接管標準規范 | Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ASTM B891-1998(2004) | 帶集成散熱片的無縫和焊接鈦及鈦合金冷凝器和熱交換器管的標準規范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B919-2001(2006) | 內部增強的焊接銅熱交換器管標準規范 | Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B924-2002(2006) | 具有整體散熱葉片的冷凝器及熱交換器用無縫及焊接鎳合金管標準規范 | Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B944-2006 | 銅鈹焊接熱交換器和冷凝管標準規范(UNS No. C17510) | Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) |
| ASTM B956-2010 | 帶集成散熱片的焊接銅和銅合金冷凝器及熱交換器管件的標準規范 | Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM C1147-2001(2006) | 耐化學腐蝕熱塑(性)塑料的短期拉伸焊接強度測定的標準實施規程 | Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
| ASTM E1032-2006 | 焊接件射線檢驗的標準試驗方法 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E1648-1995(2006) | 用于檢驗焊接中鋁的標準參考射線照片 | Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
| ASTM E749-2007 | 連續焊接時聲排放監控的標準實施規程 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
| ASTM F1145-2005 | 型鍛、焊接、鍛制松緊螺紋扣的標準規范 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM F2527-2005e1 | 外科植入物用鍛造無縫和焊接及拉制的鈷合金小直徑管的標準規范（UNS R30003、 UNS R30008、 UNS R30035、 U | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F256-2005e1 | 含有18%或26%鉻的鉻鐵焊接用合金的標準規范 | Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium |
| ASTM F31-2005 | 42%鎳6%鉻鐵焊接用合金的標準規范 | Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy |
| IEEE 1584-2002 | 電弧閃光焊接危害計算執行指南 | (Guide for performing arc-flash hazard calculations) |
| 編號 | 中文名稱 | 英文名稱 |