| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1722-10-2006 | 柵欄.鏈節和焊接篩網的防盜柵欄用規范 | Fences - Specification for anti-intruder fences in chain link and welded mesh |
| BS 1894-1992 | 焊接結構的電熱鍋爐的設計和制造規范 | Specification for design and manufacture of electric boilers of welded construction |
| BS 2790-1992 | 焊接結構的殼式鍋爐的設計和制造規范 | Specification for design and manufacture of shell boilers of welded construction |
| BS 2S 510-1970 | 碳鋼薄板和帶材規范(430/540 MPa)(適用于焊接) | Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding) |
| BS 2S 511-1970 | 深拉碳鋼薄鋼板和帶材的規范(280/400 MPa)(適用于焊接) | Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding) |
| BS 2S 514-1969 | 碳錳鋼薄板和帶材規范(淬火和回火條件:77/100MPa)(適用于焊接) | Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) |
| BS 2S 515-1969 | 碳錳鋼薄板和帶材規范(退火的)(退火條件:46/59MPa)(適用于焊接) | Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) |
| BS 2S 92-1964 | 飛機材料規范.碳錳鋼(適用于焊接)(40/55噸力/平方英寸;限定等圓斷面4英寸) | Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) |
| BS 2T 66-1980 | 19/10鉻-鎳耐腐蝕鋼管材規范(鈮穩定的:550MPa)(可焊接) | Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) |
| BS 2T 68-1980 | 冷拉18/10鉻-鎳耐腐蝕鋼管材規范(鈮穩定的:800MPa)(可焊接) | Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) |
| BS 3604-2-1991 | 承壓鋼管.具有規定高溫特性的鐵合金鋼.第2部分:縱向電弧焊接管規范 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes |
| BS 3799-1974 | 石油工業用鋼管配件、螺旋管接頭和套管焊接規范 | Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
| BS 3T 53-1980 | 鉻-鉬鋼管材規范(700MPa)(管外徑不小于12.5mm)(可焊接) | Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) |
| BS 4129-1990 | 板材鋼電阻焊用焊接底劑、焊透密封劑、粘合劑和蠟規范 | Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel |
| BS 4449-2005+A2-2009 | 混凝土增強鋼.可焊接增強鋼.棒材、卷材和拆卷產品.規范 | Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification |
| BS 4515-1-2009 | 陸地和近海鋼管焊接規范.碳和碳錳鋼管 | Specification for welding ofsteel pipelines on land andoffshorePart 1: Carbon and carbon manganesesteel pipelines |
| BS 4515-2-1999 | 陸地和近海鋪設的鋼管焊接規范.雙聯法不銹鋼管道 | Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines |
| BS 4871-3-1985 | 按認可焊接工藝操作的焊工鑒定考試規范.第3部分:金屬管與管板接頭間電弧焊 | Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials |
| BS 4872-1-1982 | 不要求批準焊接程序的焊工考試規范.第1部分:鋼熔焊 | Specification for approval testing of welders when welding procedure approval is not required - Fusion welding of steel |
| BS 4872-2-1976 | 不要求批準焊接工藝時焊工的鑒定考試規范.第2部分:鋁及鋁合金鎢極惰性氣體保護電弧焊或熔化極惰性氣體保護 | Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys |
| BS 499-1 Supplement-1992 | 焊接術語與符號.補充.電焊設備的定義 | Welding terms and symbols - Supplement - Definitions for electric welding equipment |
| BS 499-1-2009 | 焊接術語和符號.焊接、釬焊和熱切割用術語表 | Welding terms and symbolsPart 1: Glossary for welding, brazing andthermal cutting |
| BS 499-2C-1999 | 焊接術語與符號.圖表形式的的歐洲電弧焊符號 | Welding terms and symbols - European arc welding symbols in chart form |
| BS 4T 45-1972 | 碳-錳鋼管材規格(700 N/mm<上標2>)(管外徑大于或等于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) |
| BS 5950-2-2001 | 建筑物中結構用的鋼制件.材料、制造和裝配規范.軋制及焊接型材 | Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections |
| BS 5S 21-1964 | 飛機材料規范.20號碳鋼(適用于焊接)(25/35噸力/平方英寸:最大直徑或最小斷面尺寸6英寸) | Specification for aircraft material - '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension) |
| BS 638-4-1996 | 電弧焊電源、設備和附件.第4部分:焊接電纜規范 | Arc welding power sources, equipment and accessories - Specification for welding cables |
| BS 6942-2-1989 | 氧燃料氣體焊接和相關工藝用成套小型工具的設計和建造.第2部分:使用可充氧氣和燃氣容器的成套工具規范 | Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas |
| BS 6990-1989 | 含有工藝流體或其殘留物的鋼管焊接實用規程 | Code of practice for welding on steel pipes containing process fluids or their residuals |
| BS 7122-1989 | 液化氣體道路運輸用的焊接鋼槽車規范 | Specification for welded steel tanks for the road transport of liquefiable gases |
| BS 7363-1990 | 焊接用受控?zé)釓姸仍囼灪童B珠焊縫板試驗方法 | Method for bead-on-plate (BOP) test for welds |
| BS 7372-3-1993 | 工業金屬絲篩網和金屬絲編織布孔徑和絲徑組合選擇指南.第3部分:預壓接或壓力焊接金屬絲篩網的優選組合 | Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire screens |
| BS 7448-2-1997 | 斷裂機械韌性試驗.第2部分:金屬材料焊接的KDOWNIDOWNc值、臨界CTOD值和臨界J值的測定方法 | Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| BS 7655-2.4-2000 | 電纜用絕緣和鎧裝材料規范.橫向耦合彈性鎧裝化合物.焊接電纜包敷物 | Specification for insulating and sheathing materials for cables - Cross-linked elastomeric sheathing compounds - Welding cable covering |
| BS 7670-2-1997 | 電阻凸焊的鋼螺母和螺栓.焊接螺母和螺栓的焊接規范 | Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts |
| BS 8451-2004 | 氣焊切割和相關工藝用橡膠軟管.高度耐扭結重型焊接軟管(H型).規范 | Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification |
| BS 855-1990 | 集中供熱和間接熱水供應用焊接鋼鍋爐(額定輸出44KW至3MW)規范 | Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW) |
| BS 91-1998 | 電纜焊接插座.規范 | Electric cable soldering sockets - Specification |
| BS 9210 N0009-1-1978 | 射頻連接器(SMC系列)詳細規范.不密封、焊接、靜態接觸、50Ω、螺紋連接.全面評定級 | Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 $2I, screw coupling - Full assessment level |
| BS 9210 N0009-2-1978 | 射頻連接器(SMA系列)詳細規范.不密封、焊接、靜態接觸、50Ω、螺紋連接.控制圖.配合面詳圖和測量數據 | Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information |
| BS 9210 N001-1-1975 | 射頻連接器(BNC型)的詳細規范.50Ω的密封、焊接、靜態接觸.全面評定級 | Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level |
| BS 9210 N007-1-1976 | 射頻連接器(SMB型)的詳細規范.不密封、焊接、靜態接觸、50Ω、插入式連接.全面評定級 | Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment level |
| BS 9210 N007-2-1976 | 射頻連接器(SMB型)的詳細規范.不密封、焊接、靜態接觸、50Ω、連接扣.控制圖.配合面詳圖和測量數據 | Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information |
| BS 9612 N016-1979 | 振蕩器用電阻焊接密封石英晶體元件用詳細規范.DN、DZ、DQ和DP外殼、0.8～20MHz和3.0～30MHz頻率范圍.寬溫范 | Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level |
| BS 9612 N017-1979 | 振蕩器用電阻焊接密封石英晶體元件用詳細規范.DN、DZ、DQ和DP外殼、0.8～20MHz和3.0～30MHz頻率范圍.窄溫范 | Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level |
| BS DD CEN ISO/TS 15011-5-2006 | 焊接和相關工藝的衛生和安全.煙塵和氣體取樣的試驗室方法.通過完全或部分有機材料組成的產品焊接或切割時所 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| BS DD CEN ISO/TS 17845-2004 | 焊接和相關程序.缺陷的名稱與符號系統 | Welding and allied processes - Designation system for imperfections |
| BS DD CEN/TS 14751-2004 | 焊接.焊接檢驗用飛行時間衍射技術(TOFD)的使用 | Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds |
| BS DD ENV 10080-1996 | 混凝土加強筋用鋼.可焊肋狀鋼筋 B500.棒材、卷材和焊接鋼筋網的交付技術狀態 | Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B500 - Technical delivery conditions for bars, coils and welded fabric |
| BS EN 10025-3-2004 | 結構鋼熱軋制品.正火/正火熱機軋制的可焊接細粒結構鋼的交貨技術條件 | Hot rolled products of structural steels - Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| BS EN 10025-4-2004 | 結構鋼熱軋制品.熱機軋制的可焊接細粒結構鋼的交貨技術條件 | Hot rolled products of structural steels - Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| BS EN 10028-6-2009 | 壓力容器用鋼制扁平產品.可焊接淬火和回火細粒鋼 | Flat products made of steels for pressure purposes - Part 6:Weldable fine grain steels, quenched and tempered |
| BS EN 10080-2005 | 混凝土增強用鋼.可焊接增強鋼.總則 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| BS EN 1011-1-2009 | 焊接.金屬材料焊接用推薦規程.弧焊用一般指南 | Welding - Recommendations for welding of metallic materials - General guidance for arc welding |
| BS EN 1011-2-2001 | 焊接.金屬材料焊接的推薦規范.鐵素體鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels |
| BS EN 1011-3-2000 | 焊接.金屬材料焊接的推薦規范.不銹鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels |
| BS EN 1011-4-2000 | 焊接.金屬材料焊接的推薦規范.鋁及鋁合金的電弧焊接 | Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys |
| BS EN 1011-5-2003 | 焊接.金屬材料焊接的推薦規程.覆層鋼的焊接 | Welding - Recommendations for welding of metallic materials - Welding of clad steel |
| BS EN 1011-6-2005 | 焊接.金屬材料焊接的建議.第6部分:激光束焊接 | Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding |
| BS EN 1011-7-2004 | 焊接.金屬材料焊接的推薦規范.電子束焊 | Welding - Recommendations for welding of metallic materials - Electron beam welding |
| BS EN 1011-8-2004 | 焊接.金屬材料焊接的推薦規范.鑄鐵的焊接 | Welding - Recommendations for welding of metallic materials - Welding of cast irons |
| BS EN 10120-2008 | 焊接的儲氣瓶用鋼薄板材和帶材 | Steel sheet and strip for welded gas cylinders |
| BS EN 10217-1-2002 | 承壓用焊接鋼管.交付技術狀態.規定室溫特性的非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties |
| BS EN 10217-2-2002 | 承壓用的焊接鋼管.交付技術狀態.規定了高溫特性的非合金和合金電焊鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10217-3-2002 | 承壓用的焊接鋼管.交付技術狀態.合金細晶粒鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
| BS EN 10217-4-2002 | 承壓用的焊接鋼管.交付技術狀態.規定了低溫特性的非合金和合金電焊鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10217-5-2002 | 承壓用的焊接鋼管.交付技術狀態.規定了高溫特性的非合金和合金埋弧焊接鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10217-6-2002 | 承壓用的焊接鋼管.交付技術條件.規定了低溫特性的非合金埋弧焊接鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10217-7-2005 | 壓力用途焊接鋼管.交貨技術條件.不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
| BS EN 10219-1-2006 | 非合金和細晶結構鋼的冷成形焊接結構空心型材.交貨技術要求 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements |
| BS EN 10219-2-2006 | 非合金和細晶結構鋼的冷成形焊接結構空心型材.公差、尺寸和局部特性 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties |
| BS EN 10220-2002 | 無縫和焊接鋼管.尺寸和每單位長度的質量 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| BS EN 10222-4-1999 | 壓力容器用鋼鍛件.具有高驗收強度的可焊接細晶粒鋼 | Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength |
| BS EN 10223-4-1998 | 柵欄用鋼絲和鋼絲制品.鋼絲焊接網式柵欄 | Steel wire and wire products for fences - Steel wire welded mesh fencing |
| BS EN 10223-7-2002 | 欄柵用鋼絲和金屬絲制品.欄柵用鋼絲焊接網板 | Steel wire and wire products for fences - Steel wire welded panels - For fencing |
| BS EN 10225-2009 | 固定近海結構的可焊接結構鋼.技術提交條件 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| BS EN 10246-1-1996 | 鋼管的無損檢驗.證明液壓系統密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 | Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-11-2000 | 鋼管的無損檢驗.對無縫和焊接鋼管進行液體滲透試驗以檢測其表面缺陷 | Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
| BS EN 10246-12-2000 | 鋼管的無損檢驗.對無縫和焊接鐵磁鋼管進行磁粉檢驗以檢測其表面缺陷 | Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| BS EN 10246-13-2000 | 鋼管的無損檢驗.無縫和焊接鋼管(埋弧焊除外)的全外圍自動超聲波厚度檢測 | Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| BS EN 10246-14-2000 | 鋼管的無損檢驗.層狀缺陷探測用無縫和焊接(埋弧焊接除外)鋼管的自動超聲波檢驗 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| BS EN 10246-15-2000 | 鋼管的無損檢驗.無縫和焊接鋼管(埋弧焊除外)的全外圍自動超聲波厚度檢測 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-16-2000 | 鋼管的無損檢驗.對焊接鋼管焊縫臨近區域進行自動超聲波檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-17-2000 | 鋼管的無損檢驗.對無縫和焊接鋼管管端部進行超聲波檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-18-2000 | 鋼管的無損檢驗.對無縫和焊接鐵磁鋼管管端部進行磁粉檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| BS EN 10246-2-2000 | 鋼管的無損檢驗.驗證水密封性能用的無縫和焊接的(埋弧焊除外)奧氏體鐵素體鋼管的自動渦流試驗 | Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-3-2000 | 鋼管的無損檢驗.缺陷探測用無縫和焊接(埋弧焊除外)鋼管的自動渦流檢驗 | Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| BS EN 10246-5-2000 | 鋼管的無損檢驗.縱向缺陷探測用無縫和焊接(埋弧焊除外)的鐵磁性鋼管的自動全周界磁力換能器/磁力線滲漏檢驗 | Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-7-2005 | 鋼管的無損檢驗.縱向缺陷探測用無縫焊接鋼管(埋弧焊除外)的自動全周界超聲波檢驗 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
| BS EN 10246-9-2000 | 鋼管的無損檢驗.檢測縱向或橫向缺陷用的焊接和埋弧焊鋼管的自動超聲波試驗 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN 10255-2004 | 焊接或加螺紋的非合金鋼管.交貨技術條件 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| BS EN 10296-1-2003 | 機械和一般工程用焊接圓鋼管.技術交貨條件.非合金和合金鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
| BS EN 10296-2-2005 | 機械和一般工程用焊接圓鋼管.技術交貨條件.不銹鋼 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel |
| BS EN 10305-2-2010 | 精密儀器用鋼管.交貨技術條件.焊接冷拔鋼管 | Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes |
| BS EN 10305-3-2010 | 精密儀器用鋼管.交貨技術條件.焊接冷精加工鋼管 | Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes |
| BS EN 10305-5-2010 | 精密設備用鋼管.交貨技術條件.焊接和冷精加工的方形及矩形鋼管 | Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubes |
| BS EN 10305-6-2005 | 精密儀器用鋼管.交貨技術條件.第6部分:液壓和氣動動力系統用焊接冷拉管材 | Steel tubes forprecisionapplications —Technical deliveryconditions —Part 6: Welded cold drawn tubes forhydraulic and pneumatic powersystems |
| BS EN 10312-2003 | 包括人生活用水在內的水成液輸送用焊接不銹鋼管.交貨技術條件 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions |
| BS EN 1043-1-1996 | 金屬材料焊接的破壞試驗.硬度試驗.第1部分:電弧焊接的硬度試驗 | Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints |
| BS EN 1043-2-1997 | 金屬材料焊接點的破壞試驗.第2部分:焊接連接件的顯微硬度試驗 | Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints |
| BS EN 1123-1-1999 | 污水系統用插接管的縱向焊接熱浸鍍鋅鋼管及配件.要求、試驗和質量控制 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
| BS EN 1123-2-2006+A1-2007 | 廢水系統用帶套管和座孔的徑向焊接熱浸鍍鋅鋼管的管道和配件.第2部分:尺寸 | Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions |
| BS EN 1123-3-2004 | 污水系統用帶插接套的縱向焊接熱浸鍍鋅鋼管及配件.真空排水系統以及造船用排水系統的尺寸和特殊要求 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| BS EN 1124-1-1999 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.要求、測試和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
| BS EN 1124-2-2007 | 廢水系統用帶套筒的縱向焊接不銹鋼管道和配件.第2部分:S系統.尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S; dimensions |
| BS EN 1124-3-2008 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.X.設備尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3:System X. Dimensions |
| BS EN 1124-4-2005 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.第4部分:真空排水系統和船用排水系統的部件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 12074-2000 | 焊接用料.焊接和相關工藝用消耗品的生產、供應和配送質量要求 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| BS EN 12493-2008 | 液化石油氣(LPG)設備和附件.LPG用焊接鋼罐.油槽汽車的設計和制造 | (LPG) —Road tankers designand manufacture |
| BS EN 12517-1-2006 | 焊縫的無損檢驗.用放射線照相術評定鋼、鎳、鈦及其合金的焊接接縫.驗收等級 | Non-destructive testing of welds - Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
| BS EN 12517-2-2008 | 焊縫的無損檢驗.通過射線照相術評估鋁及鋁合金的焊接接頭.驗收等級 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels |
| BS EN 12542-2002 | 安裝在地面上的儲存容量不超過13M<上標3>的成系列生產的液化石油氣儲存用固定焊接圓柱形氣罐.設計與制造 | Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground - Design and manufacture |
| BS EN 1256-2006 | 氣焊設備.焊接、切割和相關工藝用軟管組件規范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| BS EN 12573-1-2000 | 焊接非靜壓熱塑罐.一般原理 | Welded static non-pressurized thermoplastic tanks - General principles |
| BS EN 12573-2-2000 | 焊接非靜壓熱塑罐.立式圓柱形罐的計算 | Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks |
| BS EN 12573-3-2000 | 焊接非靜壓熱塑罐.單層矩形罐的設計和計算 | Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks |
| BS EN 12573-4-2000 | 焊接非靜壓熱塑罐.法蘭接頭的設計和計算 | Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints |
| BS EN 12627-1999 | 工業閥門.鋼閥門的對接焊接端 | Industrial valves - Butt welding ends for steel valves |
| BS EN 12732-2000 | 供氣系統.焊接鋼管.功能要求 | Gas supply systems - Welding steel pipework - Functional requirements |
| BS EN 12760-1999 | 閥門.鋼閥門的套節焊接端 | Valves - Socket welding ends for steel valves |
| BS EN 12797-2000 | 銅焊.銅焊接頭破壞試驗 | Brazing - Destructive tests of brazed joints |
| BS EN 12799-2000 | 銅焊.銅焊接頭無損檢驗 | Brazing - Non-destructive examination of brazed joints |
| BS EN 12814-1-2000 | 熱塑性半成品焊接接頭試驗.彎曲試驗 | Testing of welded joints of thermoplastics semi-finished products - Bend test |
| BS EN 12814-2-2000 | 熱塑半成品焊接接頭試驗.拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Tensile test |
| BS EN 12814-3-2000 | 熱塑半成品焊接接頭試驗.拉伸蠕變試驗 | Testing of welded joints of thermoplastics semi-finished products - Tensile creep test |
| BS EN 12814-4-2001 | 熱塑半成品焊接接頭試驗.剝離試驗 | Testing of welded joints of thermoplastics semi-finished products - Peel test |
| BS EN 12814-5-2000 | 熱塑半成品焊接接頭試驗.宏觀檢查 | Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination |
| BS EN 12814-6-2000 | 熱塑半成品焊接接頭試驗.低溫拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test |
| BS EN 12814-7-2002 | 熱塑性半成品的焊接接頭的試驗.腰形試驗樣品的拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens |
| BS EN 12814-8-2001 | 熱塑半成品焊接接頭試驗.要求 | Testing of welded joints of thermoplastic semi-finished products -. Requirements |
| BS EN 12862-2000 | 可運輸氣瓶.可反復灌裝可運輸焊接鋁合金氣瓶的設計和制造規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| BS EN 13067-2003 | 塑料焊接人員.焊工的資格檢驗.熱塑塑料焊接組件 | Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies |
| BS EN 13100-1-2000 | 熱塑性半成品焊接接頭無損檢驗.目視檢查 | Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination |
| BS EN 13100-2-2004 | 熱塑性半成品焊接接頭的無損檢驗.X射線照相檢驗 | Non destrictive testing of welded joints of thermoplastics semi-finished products - X-ray radiographic testing |
| BS EN 13100-3-2004 | 熱塑性半成品焊接接頭的無損檢驗.超聲檢驗 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Ultrasonic testing |
| BS EN 13110-2002 | 液化石油氣用可運輸、可再充氣的焊接鋁瓶.設計和制造 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| BS EN 1320-1997 | 金屬材料焊接點的破壞試驗.斷裂試驗 | Destructive tests on welds in metallic materials - Fracture tests |
| BS EN 1321-1997 | 金屬材料焊接點的破壞試驗.焊接點的宏觀和微觀檢驗 | Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds |
| BS EN 1326-1996 | 氣焊設備.氣體硬釬焊和焊接用小型設備箱 | Gas welding equipment - Small kits for gas brazing and welding |
| BS EN 1327-1996 | 氣焊設備.焊接和類似工藝用熱固性軟管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| BS EN 13322-1-2003+A1-2006 | 可運輸?shù)臍馄?可再充填的焊接鋼瓶.設計和制造.碳鋼 | Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Carbon steel |
| BS EN 13322-2-2003 | 可運輸?shù)臍馄?可再充填的焊接鋼瓶.設計和制造.不銹鋼 | Transportable gascylinders — Refillablewelded steel gascylinders — Design andconstruction —Part 2: Stainless steel |
| BS EN 13347-2002 | 銅和銅合金.焊接和釬焊用桿材和線材 | Copper and copper alloys - Rod and wire for welding and braze welding |
| BS EN 13479-2004 | 焊接消耗品.金屬材料熔焊用填充金屬和焊劑的一般產品標準 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| BS EN 13622-2002 | 氣體焊接設備.術語.氣體焊接使用的術語 | Gas welding equipment - Terminology - Terms used for gas welding equipment |
| BS EN 13705-2004 | 熱塑焊接.熱氣焊機械和設備(包括擠焊) | Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) |
| BS EN 14015-2005 | 在室溫和高于室溫下液體儲存用現場建造的立式、圓柱形、平底、地上用焊接鋼罐的設計和制造規范 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 14075-2002 | 地下設備用和石油液化氣儲氣容量不大于13 mUP3的靜止焊接系列園柱型鋼罐.設計和制造 | Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture |
| BS EN 14140-2003 | 液化石油氣(LPG)用可移動可重填焊接鋼瓶.備選方案設計和建造 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction |
| BS EN 14163-2001 | 石油和天然氣工業.管道運輸系統.管道焊接 | Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines |
| BS EN 1418-1998 | 焊接操作人員.金屬材料全機械化焊接和自動焊接用的熔焊和電阻焊定位器的焊接操作人員的批準試驗 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| BS EN 14208-2004 | 可移動式儲氣瓶.氣體運輸用容量最高達1000升的焊接的壓力桶規范.設計和建造 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| BS EN 14286-2008 | 鋁和鋁合金.危險品的存儲和運輸槽罐用可焊接軋制產品 | Aluminium andaluminium alloys— Weldable rolledproducts for tanksfor the storage andtransportation ofdangerous goods |
| BS EN 14324-2004 | 銅焊.銅焊接合的應用指南 | Brazing - Guidance on the application of brazed joints |
| BS EN 1435-1997 | 焊縫的無損檢驗.焊接接頭的放射性檢驗 | Non-destructive examination of welds - Radiographic examination of welded joints |
| BS EN 1442-2006+A1-2008 | 液化石油氣(LPG)設備和附件.LPG用可運輸、再填充焊接鋼瓶.設計和結構 | LPG equipment andaccessories —Transportablerefillable welded steelcylinders for LPG —Design andconstruction |
| BS EN 14532-1-2004 | 焊接消耗品.試驗方法和質量要求.鋼、鎳和鎳合金消耗品的基本方法和合格評定 | Welding consumables - Test methods and quality requirements - Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 14532-2-2004 | 焊接消耗品.試驗方法和質量要求.鋼、鎳和鎳合金耗材的補充方法和合格評定 | Welding consumables - Test methods and quality requirements - Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 14532-3-2005 | 焊接消耗品.試驗方法和質量要求.鋁合金焊接用焊絲電極、焊絲和焊棒的合格評定 | Welding consumables - Test methods and quality requirements - Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| BS EN 14587-2-2009 | 鐵路設施.軌道.鐵軌的閃光對焊.第2部分:在除固定車間外的場所使用移動式電焊機焊接的新型R220,R260,R260Mn | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn andR350HT grade rails by mobile weldingmachines at sites other than a fixedplant |
| BS EN 14610-2004 | 焊接和相關工藝.金屬焊接工藝的定義 | Welding and allied processes - Definitions of metal welding processes |
| BS EN 14638-1-2006 | 可運輸?shù)臍馄?容量＜150升的可再充氣焊接插座.用實驗方法證明設計制成的焊接奧氏體不銹鋼氣瓶 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 14700-2005 | 焊接消耗品.鍍硬面法用焊接消耗品 | Welding consumables - Welding consumables for hard-facing |
| BS EN 14717-2005 | 焊接和相關工藝.環境檢查表 | Welding and allied processes - Environmental check list |
| BS EN 14728-2005 | 熱塑焊接中的缺陷.分類 | Imperfections in thermoplastic welds - Classification |
| BS EN 14730-1-2006 | 道路設施.軌道.鐵軌的鋁熱劑焊接.焊接過程的驗收 | Railway applications - Track - Aluminothermic welding of rails - Approval of welding processes |
| BS EN 14730-2-2006 | 道路設施.軌道.鐵軌的鋁熱劑焊接.鋁熱焊接工資格、合同認可和焊縫的驗收 | Railway applications - Track - Aluminothermic welding of rails - Qualifications of aluminothermic welders, approval of contractors and acceptance of welds |
| BS EN 14876-2007 | 可運輸儲氣瓶.定期檢驗和焊接鋼壓力桶試驗 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| BS EN 14893-2006 | 液化石油氣設備和附件.容量為150升～1000升可運輸液化石油氣(LPG)的焊接鋼壓力桶 | LPG equipment and accessories - Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres |
| BS EN 14913-2005 | 液化石油氣(LPG)設備和附件.液化石油氣(LPG)用可移動可再裝填焊接鋼瓶.替代方案設計和制造.裝填前、中、后 | LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Procedure for checking before, during and after filling |
| BS EN 14914-2005 | 液化石油氣(LPG)設備和附件.液化石油氣(LPG)用可移動可再裝填焊接鋼瓶.替代方案設計和制造.周期性檢驗 | LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Periodic inspection |
| BS EN 15085-1-2007 | 鐵路設施.鐵路車輛和部件的焊接法.總則 | Railway applications - Welding of railway vehicles and components - General |
| BS EN 15085-2-2007 | 鐵路設施.鐵路車輛和組件的焊接.焊接廠商的質量要求和合格證 | Railway applications - Welding of railway vehicles and components - Quality requirements and certification of welding manufacturer |
| BS EN 15085-3-2007 | 鐵路設施.鐵路車輛和組件的焊接.設計要求 | Railway applications - Welding of railway vehicles and components - Design requirements |
| BS EN 15085-4-2007 | 鐵路設施.鐵路車輛和組件的焊接.生產要求 | Railway applications - Welding of railway vehicles and components - Production requirements |
| BS EN 15085-5-2007 | 鐵路設施.鐵路車輛和組件的焊接.檢驗、測試和文獻 | Railway applications - Welding of railway vehicles and components - Inspection, testing and documentation |
| BS EN 15385-2007 | 包裝.柔性疊層管.測定頭部焊接強度的試驗方法 | Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding |
| BS EN 15594-2009 | 鐵路設施.軌道,鐵軌的電弧焊接修復 | Railway applications - Track - Restoration of rails by electric arc welding |
| BS EN 15617-2009 | 焊接接頭的無損檢驗.飛行時間衍射技術(TOFD).接受等級 | Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels |
| BS EN 1598-1998 | 焊接和類似工藝的衛生和安全.電弧焊工藝用透明焊接屏板,屏帶和遮光罩 | Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes |
| BS EN 1600-1997 | 焊接用料.不銹鋼和耐熱鋼手工金屬弧焊用的涂覆電極.分類 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification |
| BS EN 169-2002 | 眼睛保護.焊接和有關工藝用的濾波鏡.透射率要求和推薦使用方法 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| BS EN 1708-1-2010 | 焊接.鋼件基本焊接連接部件.受壓的組件 | Welding - Basic welded joint details in steel - Pressurized components |
| BS EN 1708-2-2000 | 焊接.鋼焊接時的基本連接件.無內壓組件 | Welding - Basic weld joint details in steel - Non-internal pressurized components |
| BS EN 1711-2000 | 焊接的無損檢驗.通過綜合平面分析檢驗焊接的邊緣電流 | Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis |
| BS EN 1712-1997 | 焊接無損檢驗.焊點超聲檢測.驗收水平 | Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
| BS EN 1715-3-2008 | 鋁和鋁合金.拉制坯料.機械用途(不包括焊接)特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 3:Specific requirements for mechanical uses (excluding welding) |
| BS EN 1715-4-2008 | 鋁和鋁合金.線坯.第4部分:焊接應用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding applications |
| BS EN 175-1997 | 個人防護.焊接和相關工藝中眼睛和面部的防護設備 | Personal protection - Equipment for eye and face protection during welding and allied processes |
| BS EN 1778-2000 | 焊接熱塑結構特征值.熱塑設備的設計模和允許應力測定 | Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment |
| BS EN 1792-2003 | 焊接.焊接和相關工藝術語的多語種對照表 | Welding - Multilingual list of terms for welding and related processes |
| BS EN 1803-2002 | 可運輸儲氣瓶.焊接炭素鋼儲氣瓶的周期性檢驗和測試 | Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
| BS EN 22553-1995 | 焊接、銅焊和軟釬焊連接件.制圖符號標注 | Welded, brazed and soldered joints - Symbolic representation on drawings |
| BS EN 2574-1990 | 焊接規范.圖紙上的數據 | Specification for welds - Information on drawings |
| BS EN 2591-514-2002 | 電氣和光學連接元件.試驗方法.自帶焊料和助熔劑的焊接點的可焊接性 | Elements of electrical and optical connection - Test methods - Solderability of contacts with self-contained solder and flux |
| BS EN 2656-2001 | 航空航天系列.管連接件.焊接的連接件端頭.幾何布局 | Aerospace series - Pipe coupling - Coupling end, welded - Geometric configuration |
| BS EN 288-9-1999 | 金屬材料焊接程序的規范和批準.傳輸管道的陸地和海岸現場對焊管道的焊接程序試驗 | Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| BS EN 2997-007-2006 | 航空航天系列.連續工作溫度為-65℃～175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Hermetic receptacle with round flange attached by welding or brazing - Product standard |
| BS EN 3081-2001 | 航空航天系列.鈦合金管連接件8°30'.帶動梁密封端頭的修理用焊接箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair |
| BS EN 3082-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭焊接活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair |
| BS EN 3083-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭長焊接端頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair |
| BS EN 3084-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用焊接端頭螺紋活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair |
| BS EN 3155-012-2006 | 航空航天系列.用于連接部件的電連接器.R級、焊接、D型、尺寸8、三軸插頭電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard |
| BS EN 3155-013-2006 | 航空航天系列.用于連接元件的電觸點.R級、焊接、D型、尺寸為8的插座三軸電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard |
| BS EN 3155-039-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陰性、尺寸16、同軸電觸點產品標準 | Aerospace series —Electrical contacts usedin elements ofconnection —Part 039: Contacts, electrical, coaxial,size 16, female, type D, solder, class R —Product standard |
| BS EN 3155-040-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陽性、尺寸12、同軸電觸點產品標準 | Aerospace series —Electrical contacts usedin elements ofconnection —Part 040: Contacts, electrical, coaxial,size 12, male, type D, solder, class R —Product standard |
| BS EN 3155-041-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陰性、尺寸12、同軸電觸點產品標準 | Aerospace series —Electrical contacts usedin elements ofconnection —Part 041: Contacts, electrical, coaxial,size 12, female, type D, solder, class R —Product standard |
| BS EN 3155-042-2006 | 航空航天系列.連接部件用電觸點.P級、焊接、D型、042插頭、尺寸為08的三軸電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard |
| BS EN 3155-043-2006 | 航空航天系列.連接部件中用電連接器.第043部分:P級、焊接、D型、043插座、尺寸08mm三軸電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard |
| BS EN 3155-058-2006 | 航空航天系列.用于連接部件的電接觸器.R級、焊接、D型、尺寸為16、同軸電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, male, type D, solder, class R. Product standard |
| BS EN 3155-061-2006 | 航空航天系列.連接元件用電連接器.R級、焊接、D型、插座、尺寸12、屏蔽、同軸、電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, female, type D, solder, class R. Product standard |
| BS EN 3155-067-2009 | 航空航天系列.連接元件用電連接器.R級焊接D型尺寸為8的同軸插頭電連接器產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard |
| BS EN 3155-068-2009 | 航空航天系列.連接元件中使用的電觸點.R級、D型、尺寸為08的焊接插頭同軸電氣觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard |
| BS EN 3155-069-2009 | 航空航天系列.連接元件用電連接器.P級焊接D型尺寸為16的同軸插座電連接器產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard |
| BS EN 3218-005-2006 | 航空航天系列.帶金屬殼和螺釘鎖緊的矩形連接器.帶非移動式尺寸為22的焊接觸點的插頭.產品標準 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Plug with non-removable size 22 solder contacts - Product standard |
| BS EN 3218-006-2006 | 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.帶非抽取式尺寸為22焊接連接器的插座.產品標準 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Receptacle with non-removable size 22 solder contacts - Product standard |
| BS EN 3243-2001 | 航空航天系列.鈦合金8°30'管連接件.帶動力橫梁密封端頭的焊接環箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrule, welded, with dynamic beam seal end |
| BS EN 3247-2001 | 航空航天系列.鈦合金8°30'管連接件.悶頭焊接端活接頭、 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end |
| BS EN 3272-2001 | 航空航天系列.8°30'鈦合金管連接件.動態橫梁密封端頭的焊接箍.幾何配置 | Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for ferrule, welded - Geometric configuration |
| BS EN 3372-005-2007 | 航空航天系列.工作溫度在-65℃～175℃或連續工作溫度為200℃、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard |
| BS EN 3475-509-2002 | 航空航天系列.飛行器用電纜.試驗方法.可焊接性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability |
| BS EN 3561-2001 | 航空航天系列.鈦合金管連接件8°30'.在管端焊接和變徑的帶動力橫梁密封端頭的環箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end |
| BS EN 3635-2008 | 航空航天系列.焊接邊緣.幾何構造 | Aerospace series - Weld lip - Geometrical configuration |
| BS EN 3646-007-2006 | 航空航天系列.連續工作溫度為175℃或200℃、圓形卡口耦合的電連接器.定位焊接或銅焊安裝的圓形法蘭密封插座 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, welding or brazing mounting - Product standard |
| BS EN 3688-2001 | 航空航天系列.焊接管用鈦合金制T環形填充物.14000kPa公稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure |
| BS EN 3689-2001 | 航空航天系列.焊接管用鈦合金制T環形填充物.28000kPa公稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure |
| BS EN 3691-2001 | 航空航天系列.鈦合金8°30'管連接件.長焊接的悶頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded |
| BS EN 3716-004-2006 | 航空航天系列.數字數據傳輸用三級接口的單路連接器.焊接插頭.產品標準 | Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Solder plug - Product standard |
| BS EN 379-2003+A1-2009 | 個人護眼裝置.自動焊接濾光鏡 | Personal eye-protection - Automatic welding filters |
| BS EN 3852-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.直螺紋式焊接接頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| BS EN 3854-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.焊接箍 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Ferrules, welded |
| BS EN 3857-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.焊接90度彎頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Elbows 90 °, welded |
| BS EN 3868-2005 | 航空航天系列.管連接件、松套法蘭和密封件.鈦合金TI-P64001焊接法蘭連接件 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 |
| BS EN 3882-2001 | 航空航天系列.耐熱合金NI-WH1801(NiCr20Co18Ti3Al2).焊接用填充金屬絲 | Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler wire for welding |
| BS EN 3883-2001 | 航空航天系列.耐熱合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding |
| BS EN 3884-2001 | 航空航天系列.耐熱合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding |
| BS EN 3885-2001 | 航空航天系列.耐熱合金NI-WH3601(NiCr22Mo9Nb4).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding |
| BS EN 3886-2001 | 航空航天系列.耐熱合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding |
| BS EN 3887-2001 | 航空航天系列.耐熱合金鋼CO-WH4101(CoCr20W15Ni).焊接填充金屬 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| BS EN 3888-2001 | 航空航天系列.耐熱合金CO-WH1402(CoCr22Ni22W15).焊接用填充金屬 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| BS EN 3889-2002 | 航空航天系列.FE-WM3801(X5CrNiCu17-4)鋼.焊接用填充金屬 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
| BS EN 3890-2002 | 航空航天系列.鋼FE-WM1502(X11CrNiMoVN12-3).焊接用填充金屬 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
| BS EN 3892-2001 | 航空航天系列.鈦合金TI-W64001.焊接填充金屬 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding |
| BS EN 3893-2001 | 航空航天系列.鈦合金TI-W19001.焊接用填充金屬 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding |
| BS EN 3894-2001 | 航空航天系列.耐熱合金NI-WD3201(NiMo25Fe6Cr5).焊接填充金屬 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding |
| BS EN 3895-2001 | 航空航天系列,耐熱合金NI-WH3901(NiCr16Mo15).焊接填充金屬 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding |
| BS EN 3896-2002 | 航空航天系列.鋼FE-WM1501(X13CrNiMoCo12-3-2-2).焊接用填充金屬 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2. Filler metal for welding |
| BS EN 3897-2002 | 航空航天系列.鋼FE-WA4801(X6CrNiMnNb18-10).焊接用填充金屬 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding |
| BS EN 4019-2001 | 航空航天系列.鈦合金管連接件8°30'.焊接的90°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded |
| BS EN 4020-2009 | 航空航天系列.鈦合金管連接 8°30'.帶推進線螺母焊接端90°彎頭 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90°, welded end with thrust wire nut |
| BS EN 4022-2001 | 航空航天系列.鈦合金管連接件8°30'.悶頭、90°彎頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, welded end |
| BS EN 4024-2009 | 航空航天系列.鈦合金管連接8°30'.帶推進線螺母的45°彎頭焊接端 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut |
| BS EN 4031-2001 | 航空航天系列.鈦合金管連接件8°30'.焊接活接頭用螺母 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union |
| BS EN 4058-2001 | 航空航天系列.鈦和鈦合金制的焊接用填充桿材和填充金屬絲.直徑為0.5mm 5.0mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4059-2001 | 航空航天系列.鋼焊接填充線和填充棒.直徑0.5mm和5.0mm.尺寸 | Aerospace series - Filler rods and filler wire for welding in steel - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4060-2001 | 航空航天系列.鈦和鈦合金制的焊接用填充桿材和填充金屬絲.直徑為0.5mm 5.0mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4183-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° welded ends |
| BS EN 4184-2001 | 航空航天系列.鈦合金管連接件8°30'.45°彎頭雙焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° double, welded ends |
| BS EN 4188-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭長悶頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° bulkhead, long, welded end |
| BS EN 4233-2001 | 航空航天系列.鈦合金管連接件8°30'.帶螺紋的焊接活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded |
| BS EN 4324-2002 | 航空航天系列.AL-W42201鋁合金.焊接用填充金屬.焊條 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod |
| BS EN 4325-2001 | 航空航天系列.耐熱合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod |
| BS EN 4328-2002 | 航空航天系列.FE-WM1601鋼 (X18CrWNi13-3-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod |
| BS EN 4329-2001 | 航空航天系列.耐熱合金NI-WH0001(NiCr20).焊接填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod |
| BS EN 4330-2002 | 航空航天系列.FE-WA4802鋼 (X8CrNiMn27-22-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod |
| BS EN 4331-2002 | 航空航天系列.FE-WL1804鋼 (25CrMnMo4-2-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod |
| BS EN 4332-2002 | 航空航天系列.FE-WL1805鋼 (8CrMnMo12-4-9). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod |
| BS EN 4333-2002 | 航空航天系列.FE-WA4902鋼 (X5CrNiCoMoWMn21-20-20-3-3-2). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod |
| BS EN 4334-2002 | 航空航天系列.FE-WL1806鋼 (15CrMnMoV5-4-9-3). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod |
| BS EN 4335-2002 | 航空航天系列.FE-WA2602鋼 (X4NiCrTiMoV26-15). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod |
| BS EN 4336-2002 | 航空航天系列.FE-WA3801鋼 (X4CrNiMn20-10-2). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod |
| BS EN 4340-2002 | 航空航天系列.MG-W68001鎂合金鋼. 焊接用填充金屬.焊絲和焊條 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod |
| BS EN 4341-2001 | 航空航天系列.鋁合金AL-W46431.焊接填充金屬.金屬絲和焊條 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod |
| BS EN 4342-2001 | 航空航天系列.鈦Ti-W99001.焊接填充金屬.金屬絲和焊條 | Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
| BS EN 4343-2002 | 航空航天系列.FE-WM1001 ( X13Cr12 )鋼. 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod |
| BS EN 4549-2003 | 航空航天系列.耐熱鋼或耐熱鎳合金管連接件.焊接連接端.設計造型.英制 | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series |
| BS EN 4552-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的直管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series |
| BS EN 4553-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的90 彎頭管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series |
| BS EN 4555-2003 | 航空航天系列.耐熱鋼制37 管聯接器.端部焊接的金屬箍.英制 | Aerospace series - Pipe coupling 37 °, in heat resisting steel - Ferrules, welded end - Inch series |
| BS EN 4557-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的T形管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series |
| BS EN 4561-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.90 彎頭.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90 °. Inch series |
| BS EN 4562-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.變徑管.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series |
| BS EN 4563-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.三通管.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series |
| BS EN 4632-001-2008 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性的一般要求 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - General requirements |
| BS EN 4632-002-2008 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.均質鋁及鋁合金組件 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assembliesaluminium and aluminium alloys |
| BS EN 4632-005-2009 | 航空航天系列.航空航天結構用材料的可焊接性和可銅焊性.耐熱Ni 或Co基合金的類似組件 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Homogeneous assemblies of heat resisting Ni or Co base alloys |
| BS EN 50069-1991+A1-1993 | 充氣式高壓開關裝置和控制器用鑄造和鍛造鋁合金的焊接復合封閉物用規范 | Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear |
| BS EN 50445-2008 | 能夠證明符合人體暴露于(0HZ-300GHZ)電磁場基本限制的電阻焊接、電弧焊及其相關工藝設備的產品系列標準 | Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
| BS EN 560-2005 | 氣焊設備.焊接、切割和相關工藝用設備的軟管連接件 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| BS EN 561-2002 | 氣焊設備.焊接、切割和類似加工工藝用斷路閥門快速連接器 | Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| BS EN 60068-2-58-2004 | 環境試驗.試驗.試驗Td.表面安裝設備(SMD)的可焊性、耐金屬化溶融和耐焊接熱試驗方法 | Environmental testing - Tests - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| BS EN 60317-19-1996 | 特種繞組線規范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅線.130級 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 |
| BS EN 60317-2-1993 | 特種繞組線規范.130級帶粘合層的可焊接聚氨酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer |
| BS EN 60317-20-1993 | 特種繞線規范.155級可焊接聚氨酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155 |
| BS EN 60317-23-1993 | 特種繞線規范.180級可焊接聚酰胺酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180 |
| BS EN 60317-35-1993 | 特種繞線規范.155級帶粘結層的可焊接聚氨酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer |
| BS EN 60317-36-1993 | 特種繞組線規范.180級帶粘結層的可焊接聚酰胺酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer |
| BS EN 60317-4-1993 | 特種繞線規范.130級可焊接聚氨酯漆包圓銅線 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130 |
| BS EN 60317-51-2001 | 特種繞組線規范.可焊接的聚氨酯漆包圓銅線.180級 | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 180 |
| BS EN 60512-12-1-2006 | 電子設備連接器.試驗和測量.焊接試驗.試驗12a.金屬熔化浴法測量可焊性 | Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12a - Solderability, wetting, solder bath method |
| BS EN 60512-12-4-2006 | 電子設備用連接器.試驗和測量.焊接試驗.試驗12d:焊料濕浴法測量焊接加熱阻力 | Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12d - Resistance to soldering heat, solder bath method |
| BS EN 60512-12-5-2006 | 電子設備用連接器.試驗和測量.焊接試驗.試驗12e:鐵錫焊法測量錫焊加熱阻力 | Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12e - Resistance to soldering heat, soldering iron method |
| BS EN 60512-12-6-1997 | 電子設備用機電元件.基本試驗規程和測量方法.釬焊性試驗. 試驗12f:機械釬焊焊接過程中溶劑和清洗劑密封性 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Soldering tests - Test 12f - Sealing against flux and cleaning solvents in machine soldering |
| BS EN 60512-16-20-1997 | 電子設備用機電元件.基本試驗規程和測量方法.第16部分:觸點和接線端機械試驗.第20節:第16項試驗:機械強度( | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Mechanical tests on contacts and terminations - Test 16t - Mechanical strength (wired termination of solderless connections) |
| BS EN 60519-8-2005 | 電熱裝置安全性.第8部分:電渣焊接熔爐的特殊要求 | Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces |
| BS EN 60534-3-3-1998 | 工業過程控制閥.尺寸.對接焊接,兩向,球型,垂直模式控制閥端對端尺寸 | Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| BS EN 60749-20-1-2009 | 半導體器件.機械和氣候試驗方法.對潮濕和焊接熱綜合效應敏感元器件的操作包裝,標志和運輸 | Semiconductor devices - Mechanical and climatic test methods - Part 20-1:Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat |
| BS EN 60779-2005 | 工業電熱設備.電渣焊接重熔爐用試驗方法 | Industrial electroheat equipment - Test methods for electroslag remelting furnaces |
| BS EN 60974-1-2005 | 電弧焊設備.焊接電源 | Arc welding equipment - Welding power sources |
| BS EN 60974-12-2005 | 電弧焊接設備.焊接電纜耦合器 | Arc welding equipment - Coupling devices for welding cables |
| BS EN 60974-7-2005 | 電弧焊接設備.焊炬 | Arc welding equipment - Torches |
| BS EN 60974-8-2009 | 弧焊設備.焊接和等離子切割設備用氣體控制臺 | Arc welding equipment —Part 8: Gas consoles for welding and plasmacutting systems |
| BS EN 61076-4-107-2001 | 電子設備用連接器.印制板連接器.基本網格為2.0mm、固定部分有印制板用焊接終端和壓入終端、活動部分有不可 | Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
| BS EN 61188-5-2-2003 | 印制板及其組件.設計和使用.焊接(焊接區/接縫)的考慮.分立元件 | Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Discrete components |
| BS EN 61188-5-3-2007 | 印制電路板和印制電路板組件.設計和使用.第5-3部分:焊接(焊接區/焊縫)考慮.兩面帶有翅形引線的部件 | Printed boards and printed board assemblies - Design and use - Attachment (land/joint) considerations - Components with gull- wing leads on two sides |
| BS EN 61188-5-4-2007 | 印制電路板和印制電路板組件.設計和使用.第5-4部分:焊接(焊接區/焊縫)考慮.兩面帶有J形引線的部件 | Printed boards and printed board assemblies - Design and use - Attachments (land/joint) considerations - Components with J leads on two sides |
| BS EN 61188-5-5-2007 | 印制電路板和印制電路板組件.設計和使用.第5-5部分:焊接(焊接區/焊縫)考慮.四面帶有翅形引線的部件 | Printed boards and printed board assemblies - Design and use - Attachment (land/joint) considerations - Components with gull- wing leads on four sides |
| BS EN 61188-5-8-2008 | 印制電路板和印制電路板組件.設計和使用.焊接(焊接區/焊縫)要求.區域陣列組件(BGA、FBGA、CGA、LGA) | Printed boards andprinted boardassemblies — Designand use —Part 5-8: Attachment (land/joint)considerations — Area arraycomponents (BGA, FBGA, CGA, LGA) |
| BS EN 61191-1-1999 | 印制電路板組件.通用規范.使用表面安裝和相關裝配技術的焊接電氣和電子組件要求 | Printed board assemblies - Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| BS EN 61191-2-1999 | 印制電路板組件.分規范.表面安裝焊接組件要求 | Printed board assemblies - Sectional specification - Requirements for surface mount soldered assemblies |
| BS EN 61191-3-1999 | 印制電路板組件.分規范.通孔安裝焊接組件要求 | Printed board assemblies - Sectional specification - Requirements for through-hole mount soldered assemblies |
| BS EN 61191-4-1999 | 印制電路板組件.分規范.端點焊接組件要求 | Printed board assemblies - Sectional specification - Requirements for terminal soldered assemblies |
| BS EN 62135-2-2008 | 電阻焊接設備.電磁兼容性(EMC)要求 | Resistance welding equipment - Electromagnetic compatibility (EMC) requirements |
| BS EN 62137-1-1-2007 | 表面安裝技術.表面安裝焊接接縫的環境和耐久性試驗方法.第1-1部分:拉拔強度試驗 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Pull strength test |
| BS EN 62137-1-2-2007 | 表面安裝技術.表面安裝焊接接縫的環境和耐久性試驗方法.第1-2部分:剪切強度試驗 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Shear strength test |
| BS EN 62137-1-5-2009 | 表面安裝技術.表面安裝焊接點的環境承受試驗方法.機械剪切疲勞試驗 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5:Mechanical shear fatigue test |
| BS EN 756-2004 | 焊接消耗品.非合金和細粒鋼埋弧焊用實芯焊絲、實芯焊絲和藥芯焊絲混合助熔劑.分類 | Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| BS EN 757-1997 | 焊接用料.高強度鋼手工金屬弧焊用的涂藥焊條的分類 | Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
| BS EN 760-1996 | 焊接用料 .埋弧焊用焊劑.分類 | Welding consumables - Fluxes for submerged arc welding - Classification |
| BS EN 875-1995 | 金屬材料焊接的破壞試驗.沖擊試驗.試樣定位、槽口取向和檢驗 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| BS EN 876-1995 | 金屬材料焊接的破壞試驗.熔焊接點中焊接金屬的縱向拉伸試驗 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| BS EN 895-1995 | 金屬材料焊接的破壞試驗.橫向抗拉試驗 | Destructive tests on welds in metallic materials - Transverse tensile test |
| BS EN IS0 22825-2006 | 焊接的無損試驗.超聲波試驗.奧氏體鋼和鎳合金焊接試驗 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys |
| BS EN ISO 10042-2006 | 焊接.鋁和鋁合金弧焊接頭.缺陷質量分級 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| BS EN ISO 10447-2007 | 電阻焊接.電阻點焊和凸焊的剝離和鑿剝離測試 | Resistance welding - Peel and chisel testing of resistance spot and projection welds |
| BS EN ISO 1071-2003 | 焊接耗材.鑄鐵熔焊用藥皮(涂料)電焊條、焊絲、焊棒和管狀焊條.分類 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification |
| BS EN ISO 10882-1-2001 | 焊接和有關過程的衛生和安全.操作者呼吸區域的空氣懸浮顆粒和氣體的取樣.空氣懸浮顆粒取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of airborne particles |
| BS EN ISO 10882-2-2000 | 焊接及相關工藝的衛生與安全.操作人員呼吸區域內空氣中懸浮顆粒及氣體的抽樣.氣體的抽樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of gases |
| BS EN ISO 11611-2008 | 焊接和類似工藝用防護服裝 | Protective clothing for use in welding and allied processes |
| BS EN ISO 11970-2007 | 鋼鑄件產品焊接用焊接程序的規范和驗收 | Specification and approval of welding procedures for production welding of steel castings |
| BS EN ISO 13916-1997 | 焊接.預熱溫度、層間溫度和預加熱的維持溫度測量的導則 | Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| BS EN ISO 13918-2008 | 焊接.弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding |
| BS EN ISO 13919-1-1997 | 焊接.電子和激光束焊接接頭.缺陷的質量級別導則.鋼 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel |
| BS EN ISO 13919-2-2001 | 焊接.電子和激光束焊接接頭.缺陷的質量分級指南.鋁及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys |
| BS EN ISO 13920-1997 | 焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position |
| BS EN ISO 14114-1999 | 氣焊設備.焊接,切割和有關加工工藝用的乙炔導管系統.一般要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements |
| BS EN ISO 14172-2008 | 焊接消耗品.鎳和鎳合金的手工金屬弧焊用涂敷焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification |
| BS EN ISO 14175-2008 | 焊接消耗品.氧炔焊及有關工藝用氣體和混合氣體 | Welding consumables - Gases and gas mixtures for fusion welding and allied processes |
| BS EN ISO 14270-2001 | 電阻點焊、滾焊和浮凸焊接機械剝離試驗的程序和樣品尺寸 | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| BS EN ISO 14271-2001 | 電阻點焊、凸焊和滾焊的焊接點維氏硬度試驗(低荷載和超微硬度) | Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) |
| BS EN ISO 14272-2001 | 電阻點焊和浮凸焊的焊接點十字形抗拉試驗的試樣尺寸和程序 | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds |
| BS EN ISO 14273-2001 | 電阻點焊、縫焊和浮凸焊接的焊接點剪切試驗的試樣尺寸和程序 | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
| BS EN ISO 14323-2006 | 電阻點焊和凸焊.焊接破壞試驗.影響剪切試驗和剪切試驗的樣本尺寸和程序 | Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing |
| BS EN ISO 14324-2003 | 電阻點焊.焊接有損試驗.點焊接頭的疲勞試驗方法 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints |
| BS EN ISO 14327-2004 | 電阻焊接.電阻點焊、凸焊和縫焊用可焊性瓣輪的測定規程 | Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
| BS EN ISO 14329-2003 | 電阻點焊.焊接有損試驗.電阻點焊、縫焊和凸焊的故障類型和幾何測量 | Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds |
| BS EN ISO 14341-2008 | 焊接消耗品.非合金鋼和細粒鋼金屬氣體保護焊用焊絲和溶敷金屬.分類 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| BS EN ISO 14343-2009 | 焊接材料.不銹鋼和耐熱鋼電弧焊用焊絲電極、焊絲和焊條.分類 | Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification |
| BS EN ISO 14372-2001 | 焊接耗材.通過測量擴散氫方法測定手工電弧焊焊條的抗?jié)裥? | Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen |
| BS EN ISO 14373-2007 | 電阻焊接.無涂層和有涂層低碳鋼的點焊程序 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels |
| BS EN ISO 14554-1-2001 | 焊接的質量要求.金屬材料的電阻焊接.全面質量要求 | Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements |
| BS EN ISO 14554-2-2001 | 焊接的質量要求.金屬材料的電阻焊接.基本質量要求 | Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements |
| BS EN ISO 14555-2006 | 焊接.金屬材料的電弧螺栓焊 | Welding - Arc stud welding of metallic materials |
| BS EN ISO 14731-2006 | 焊接協調.任務和責任 | Welding coordination - Tasks and responsibilities |
| BS EN ISO 14744-1-2008 | 焊接.電子束焊接機器的驗收檢驗.原則和驗收條件 | Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions |
| BS EN ISO 14744-2-2001 | 焊接.電子束焊接機的驗收檢驗.加速電壓特性測量 | Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics |
| BS EN ISO 14744-3-2001 | 焊接.電子束焊接機的驗收檢驗.電子束電流特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics |
| BS EN ISO 14744-4-2001 | 焊接.電子束焊接機的驗收檢驗.焊接速度的測量 | Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed |
| BS EN ISO 14744-5-2001 | 焊接.電子束焊接機的驗收檢驗.偏轉精度的測量 | Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy |
| BS EN ISO 14744-6-2001 | 焊接.電子束焊接機的驗收檢驗.電焊位置穩定性的測量 | Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position |
| BS EN ISO 15011-1-2009 | 焊接和相關工藝中的健康和安全.煙塵和氣體的實驗室取樣方法.電弧焊產生的煙塵排放率測定和煙塵采集分析 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of fume emission rate during arc welding and collection of fume for analysis |
| BS EN ISO 15011-2-2009 | 焊接和相關工藝中的健康和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.在電弧焊、切削加工和刨削槽時， | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging |
| BS EN ISO 15011-3-2009 | 焊接和相關工藝的健康和安全.煙和氣體取樣的實驗室法.電弧焊時臭氧排放率的測定 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of ozone emission rate during arc welding |
| BS EN ISO 15011-4-2006+A1-2008 | 焊接和相關工藝的衛生和安全.煙,氣取樣用實驗室法.第4部分:煙數據單 | Health and safety inwelding and alliedprocesses — Laboratorymethod for samplingfume and gases —Part 4: Fume data sheets |
| BS EN ISO 15012-1-2005 | 焊接和相關工藝中的健康和安全.空氣過濾用設備的試驗和標記要求.焊接煙塵分離效率的試驗 | Health and safety in welding and allied processes - Requirements testing and marking of equipment for air filtration - Testing of the separation efficiency for welding fume |
| BS EN ISO 15012-2-2008 | 焊接和相關工藝中的衛生和安全.空氣過濾設備的要求、測試和標記.采集罩和噴嘴的最小空氣體積流率的測定 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Determination of the minimum air volume flow rate of captor hoods and nozzles |
| BS EN ISO 15607-2003 | 金屬材料焊接程序規范和合格鑒定.總則 | Specification and qualification of welding procedures for metallic materials - General rules |
| BS EN ISO 15609-1-2004 | 金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Arc welding |
| BS EN ISO 15609-2-2001 | 金屬焊接程序的規范和合格評定.焊接程序規范.氣焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Gas welding |
| BS EN ISO 15609-3-2004 | 金屬材料焊接程序的規范和合格評定.焊接程序規范.電子束焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Electron beam welding |
| BS EN ISO 15609-4-2009 | 金屬材料焊接工藝的規則和限定.焊接工藝規范.激光束焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
| BS EN ISO 15609-5-2004 | 金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電阻焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Resistance welding |
| BS EN ISO 15610-2003 | 金屬材料焊接程序的規范和認可.基于試驗消耗品的認可 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables |
| BS EN ISO 15611-2003 | 金屬材料焊接程序規范和合格鑒定.根據已有焊接經驗進行合格鑒定 | Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience |
| BS EN ISO 15612-2004 | 金屬材料焊接程序的規范和合格鑒定.標準焊接程序采用的合格鑒定 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure |
| BS EN ISO 15613-2004 | 金屬材料的焊接程序的鑒定和規范.基于預生產焊接試驗的合格鑒定 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test |
| BS EN ISO 15614-1-2004+A1-2008 | 金屬材料焊接工藝規范和鑒定.焊接工藝試驗.鋼弧焊和氣焊、鎳及鎳合金的弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| BS EN ISO 15614-10-2005 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.高壓干焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Hyperbaric dry welding |
| BS EN ISO 15614-11-2002 | 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.電子和激光束焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding |
| BS EN ISO 15614-12-2004 | 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.點焊、縫焊和凸焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Spot, seam and projection welding |
| BS EN ISO 15614-13-2005 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.電阻對接焊和電弧對接焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Resistance butt and flash welding |
| BS EN ISO 15614-2-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁及其合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys |
| BS EN ISO 15614-3-2008 | 金屬材料用焊接程序的規范和鑒定.焊接程序試驗.非合金和低合金鑄鐵的氧炔焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Fusion welding of non-alloyed and low-alloyed cast irons |
| BS EN ISO 15614-4-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁鑄件的精焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Finishing welding of aluminium castings |
| BS EN ISO 15614-5-2004 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.鈦、鋯及其合金電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of titanium, zirconium and their alloys |
| BS EN ISO 15614-6-2006 | 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.銅及其合金的弧焊和氣焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of copper and its alloys |
| BS EN ISO 15614-7-2007 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.覆蓋焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Overlay welding |
| BS EN ISO 15614-8-2002 | 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.管對管焊接. 平板接合 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints |
| BS EN ISO 15615-2002 | 氣焊設備.焊接，切割和有關加工工藝用的乙炔氣支管系統.高壓裝置的安全性要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices |
| BS EN ISO 15616-1-2003 | 高質量焊接和切割用CO2激光束機的驗收試驗.通用原則和驗收條件 | Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions |
| BS EN ISO 15616-2-2003 | 高質量焊接和切割用CO2激光束機的驗收試驗.靜態和動態精確度的測定 | Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy |
| BS EN ISO 15616-3-2003 | 高質量焊接和切割用CO2激光束機的驗收試驗.氣體流量和壓力測量儀的校正 | Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure |
| BS EN ISO 15618-1-2002 | 水下焊接焊工的資格鑒定測試.高壓濕法焊接的潛水焊工 | Qualification testing of welders for under-water welding - Diver-welders for hyperbaric wet welding |
| BS EN ISO 15618-2-2002 | 水下焊接焊工的資格鑒定測試.潛水焊工和高壓干法焊工 | Qualification testing of welders for under-water welding - Diver-welders and welding operators for hyperbaric dry welding |
| BS EN ISO 15620-2000 | 焊接.金屬材料摩擦焊接 | Welding - Friction welding of metallic materials |
| BS EN ISO 15630-2-2002 | 混凝土的鋼筋和預應力用鋼.試驗方法.焊接纖維 | Steel for the reinforcement and prestressing of concrete - Test methods - Welded fabric |
| BS EN ISO 15792-1-2008 | 焊接消耗品.試驗方法.鋼、鎳和鎳合金全焊金屬試樣的試驗方法 | Welding consumables - Test methods - Test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| BS EN ISO 15792-2-2008 | 焊接消耗品.試驗方法.鋼的單道焊和雙道焊技術試樣的制備 | Welding consumables - Test methods - Preparation of single-run and two-run technique test specimens in steel |
| BS EN ISO 15792-3-2008 | 焊接消耗品.試驗方法.角焊中焊接消耗品的填位能力和根部焊透力的分類測試 | Welding consumables - Test methods - Classification testing of positional capacity and root penetration of welding consumables in a fillet weld |
| BS EN ISO 16432-2006 | 電阻焊接.用壓紋凸焊法對無覆層和有覆層低碳鋼的凸焊規程 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| BS EN ISO 16433-2006 | 電阻焊接.無涂覆和涂覆的低碳鋼密封焊接用程序 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels |
| BS EN ISO 16834-2007 | 焊接消耗品.高強度鋼氣體保護電弧焊用焊絲電極、焊絲、焊條和沉積金屬.分類 | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification |
| BS EN ISO 17632-2008 | 焊接消耗品.非合金和細晶粒鋼的氣體保護和無氣體保護金屬弧焊用管狀芯焊條.分類 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification |
| BS EN ISO 17633-2006 | 焊接消耗品.不銹鋼和耐熱鋼的氣體保護和非氣體保護金屬弧焊用藥芯電極和焊條.分類 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification |
| BS EN ISO 17634-2006 | 焊接消耗品.抗蠕變鋼的氣體保護金屬極電弧焊用藥芯焊條.分類 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification |
| BS EN ISO 17641-1-2004 | 金屬材料焊接的有損試驗.焊件的熱裂試驗.弧焊過程.概要 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - General |
| BS EN ISO 17641-2-2005 | 金屬材料焊接的有損試驗.焊接的熱裂試驗.弧焊工藝.自束試驗 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests |
| BS EN ISO 17642-1-2004 | 金屬材料中焊接的有損檢驗.焊接的冷裂試驗.弧焊工藝.總則 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - General |
| BS EN ISO 17642-2-2005 | 金屬材料焊接的有損試驗.焊接的冷裂試驗.弧焊工藝.自束試驗 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Self-restraint tests |
| BS EN ISO 17642-3-2005 | 金屬材料焊接的有損檢驗.焊接的冷裂試驗.弧焊工藝.外部載荷試驗 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Externally loaded tests |
| BS EN ISO 17652-1-2003 | 焊接.有關焊接和相關工藝的工廠底漆的試驗.一般要求 | Welding - Test for shop primers in relation to welding and allied processes - General requirements |
| BS EN ISO 17652-2-2003 | 焊接.有關焊接和相關工藝有關的工廠底漆的試驗.工廠底漆的焊接特性 | Welding - Test for shop primers in relation to welding and allied processes - Welding properties of shop primers |
| BS EN ISO 17652-3-2003 | 焊接.有關焊接和相關工藝有關的工廠底漆的試驗.熱切割 | Welding - Test for shop primers in relation to welding and allied processes - Thermal cutting |
| BS EN ISO 17652-4-2003 | 焊接.有關焊接和相關工藝有關的工廠底漆的試驗.煙氣排放 | Welding - Test for shop primers in relation to welding and allied processes - Emission of fumes and gases |
| BS EN ISO 17654-2003 | 金屬材料焊縫的有損試驗.電阻焊接.電阻縫焊的壓力試驗 | Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds |
| BS EN ISO 17657-1-2006 | 電阻焊接.電阻焊接用焊接電流測量.測量指南 | Resistance welding - Welding current measurement for resistance welding - Guidelines for measurement |
| BS EN ISO 17657-2-2006 | 電阻焊接.電阻焊接用焊接電流測量.帶電流感應線圈的焊接電流計 | Resistance welding - Welding current measurement for resistance welding - Welding current meter with current sensing coil |
| BS EN ISO 17657-3-2006 | 電阻焊接.電阻焊接用焊接電流測量.電流感應線圈 | Resistance welding - Welding current measurement for resistance welding - Current sensing coil |
| BS EN ISO 17657-4-2006 | 電阻焊接.電阻焊接用焊接電流測量.校驗系統 | Resistance welding - Welding current measurement for resistance welding - Calibration system |
| BS EN ISO 17657-5-2006 | 電阻焊接.電阻焊接用焊接電流測量.焊接電流測量系統的驗證 | Resistance welding - Welding current measurement for resistance welding - Verification of welding current measuring system |
| BS EN ISO 17659-2004 | 焊接.帶圖解的焊接接頭的多語種術語 | Welding - Multilingual terms for welded joints with illustrations |
| BS EN ISO 17660-1-2006 | 焊接.鋼筋焊接.承載焊接接縫 | Welding - Welding of reinforcing steel - Part 1: Load-bearingwelded joints |
| BS EN ISO 17660-2-2006 | 焊接.鋼筋焊接.非承載焊接接縫 | Welding - Welding of reinforcing steel - Part 2: Non load-bearingwelded joints |
| BS EN ISO 17662-2005 | 焊接.包含輔助工作的焊接用設備的校正、鑒定和效驗 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN ISO 17663-2009 | 焊接.與焊接和相關工藝過程有關的熱處理質量要求 | Welding - Quality requirements for heat treatment in connection with welding and allied processes(ISO17663:2009) |
| BS EN ISO 17677-1-2009 | 電阻焊接.詞匯表.點焊,凸焊和縫焊 | Resistance welding - Vocabulary - Part 1: Spot, projection and seamwelding (ISO 17677-1:2009) |
| BS EN ISO 18273-2004 | 焊接消耗品.鋁和鋁合金焊接用絲狀電極、焊絲和焊條.分類 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification |
| BS EN ISO 18274-2004 | 焊接消耗品.鎳和鎳合金熔焊用絲狀和桿狀電極、焊絲和焊條.分類 | Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification |
| BS EN ISO 18279-2004 | 釬焊.釬焊接縫的缺陷 | Brazing - Imperfections in brazed joints |
| BS EN ISO 18592-2009 | 電阻焊接.焊接破壞性試驗.多點疲勞試驗方法.焊接樣本 | Resistance welding - Destructive testing of welds - Method for the fatigue testing of multispot- welded specimens |
| BS EN ISO 18594-2007 | 電阻點焊、凸焊和縫隙焊接.測定鋁和鋼材料躍遷電阻的方法 | Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material |
| BS EN ISO 18595-2007 | 電阻焊接.鋁和鋁合金的點焊.可焊性、焊接和測試 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
| BS EN ISO 21670-2003 | 法蘭六角焊接螺母 | Hexagon weld nuts with flange |
| BS EN ISO 21952-2007 | 焊接消耗品.抗蠕變鋼的氣體保護電弧焊用絲狀電極、焊絲、焊條和沉漬物. 分類 | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel - Classification |
| BS EN ISO 22827-1-2006 | Nd:YAG激光束焊接機器的驗收試驗.帶光纖送的機器.激光裝配 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly |
| BS EN ISO 22827-2-2006 | Nd:YAG激光束焊接機器的驗收試驗.帶光纖傳送的機器.移動機理 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism |
| BS EN ISO 22829-2007 | 電阻焊接.帶組合變壓器焊接槍用變壓器整流器.工作在1000 Hz頻率的變壓器整流器 | Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer- rectifier units operating at 1000 Hz frequency |
| BS EN ISO 23278-2009 | 焊接點無損檢測.焊接點磁粒試驗.驗收標準 | Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels |
| BS EN ISO 24034-2005+A1-2008 | 焊接消耗品.鈦和鈦合金的熔焊用焊絲和焊條.分類 | Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification |
| BS EN ISO 24373-2009 | 焊接消耗品.銅和銅合金熔焊用實心焊絲和焊條.分類 | Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification |
| BS EN ISO 24598-2007 | 焊接消耗品.耐蠕變鋼潛弧焊用實心焊絲、管狀芯焊條和焊條/焊劑組合件.分類 | Welding consumables - Solid wire electrodes, tubular coredelectrodes and electrode/flux combinations for submerged arcwelding of creep-resisting steels - Classification |
| BS EN ISO 2503-2009 | 氣體焊接設備.在壓力為300巴(30兆帕)以下條件下在焊接,切割和相關工藝中用于氣體鋼瓶中的壓力調節器和帶有 | Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| BS EN ISO 2560-2009 | 焊接材料.非合金鋼和細粒鋼的手工金屬電弧焊用涂敷焊條.分類 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification |
| BS EN ISO 26304-2009 | 焊接消耗品.高強度鋼埋弧焊用線狀和管狀芯電極及焊條熔劑化合物.分類 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
| BS EN ISO 3580-2008 | 焊接消耗品.抗蠕變鋼的手工金屬電弧焊用藥皮電焊條.規范 | Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification |
| BS EN ISO 3690-2001 | 焊接和相關處理.鐵素體鋼弧焊金屬氫含量的測定 | Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal |
| BS EN ISO 4063-2009 | 焊接及相關工藝過程.工藝過程的名稱和參考編號 | Welding and allied processes - Nomenclature of processes and reference numbers |
| BS EN ISO 5182-2009 | 焊接.電阻焊條和輔助設備材料 | Resistance welding - Materials for electrodes and ancillary equipment(ISO 5182:2008) |
| BS EN ISO 5183-1-2001 | 電阻焊接設備.外錐度1:10的電極適配器.錐度1:10的圓錐形固定件 | Resistance welding equipment - Electrode adaptors, male taper 1: 10 - Conical fixing, taper 1:10 |
| BS EN ISO 5183-2-2001 | 電阻焊接設備.外錐度1:10電極適配器.端推力電極用平行桿固定件 | Resistance welding equipment - Electrode adaptors, male taper 1: 10 - Parallel shank fixing for end-thrust electrodes |
| BS EN ISO 544-2003 | 焊接消耗品.焊接填充金屬的交貨技術條件.產品的類型、尺寸、公差和標記 | Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings |
| BS EN ISO 5817-2007 | 焊接.鋼、鎳、鈦和其合金的熔焊接頭(束焊除外).缺陷的質量等級 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
| BS EN ISO 636-2008 | 焊接消耗品.非合金鋼和細粒鋼的鎢惰性氣體焊用焊條、焊絲和溶敷金屬.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| BS EN ISO 6520-1-2007 | 焊接和相關工藝.金屬材料中幾何缺陷的分類.熔焊 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Fusion welding |
| BS EN ISO 6520-2-2002 | 焊接及相關工藝.金屬材料中幾何缺陷的分類.壓力焊 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Welding with pressure |
| BS EN ISO 6847-2001 | 焊接消耗品.化學分析用的焊接金屬塊的沉積 | Welding consumables - Deposition of a weld metal pad for chemical analysis |
| BS EN ISO 6947-1997 | 焊接.工作位置.傾角和轉動的定義 | Welds - Working positions - Definitions of angles of slope and rotation |
| BS EN ISO 7291-2001 | 氣焊設備.300bar以下的焊接、切削及相關工藝用匯流系統用壓力調節器 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar |
| BS EN ISO 8205-3-1997 | 電阻焊接水冷次級線圈連接電纜.試驗要求 | Water-cooled secondary connection cables for resistance welding - Test requirements |
| BS EN ISO 8249-2000 | 焊接.奧氏體和雙重鐵氧體奧氏體鎳不銹鋼焊接金屬中鐵素體數的測定 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| BS EN ISO 8501-3-2006 | 涂料和相關產品使用前鋼襯底的處理.表面清潔度的目測評定.:焊接、切邊和其它表面缺陷區域的處理等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of welds, edges and other areas with surface imperfections |
| BS EN ISO 9018-2003 | 金屬材料焊接的破壞試驗.十字形接縫和搭接縫的抗拉試驗 | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints |
| BS EN ISO 9539-2010 | 氣焊設備.用于氣體焊接、切割和相關工藝過程設備的材料 | Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes |
| BS EN ISO 9692-1-2003 | 焊接和相關工藝.接縫制備的建議.鋼的手動金屬電弧焊、氣體保護金屬電弧焊、氣焊、TIG焊接和束焊 | Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
| BS EN ISO 9692-2-1998 | 焊接和相關工藝.接頭的預處理.鋼的埋弧焊 | Welding and allied processes - Joint preparation - Submerged arc welding of steels |
| BS EN ISO 9692-3-2001 | 焊接和相關工藝.接頭的準備.鋁及其合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 | Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS EN ISO 9692-4-2003 | 焊接和相關工藝.接頭制備.包鋼 | Welding and allied processes - Joint preparation - Clad steels |
| BS ISO 13953-2001 | 聚乙烯管道和配件.根據對焊接頭對試樣的抗拉強度和斷裂模式的測定 | Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 14347-2008 | 疲勞.焊接中空部件連接件用設計程序.建議 | Fatigue - Design procedure for welded hollow-section joints - Recommendations |
| BS ISO 17657-1-2006 | 電阻焊.電阻焊的焊接電流測量.測量指南 | Resistance welding - Welding current measurement for resistance welding - Guidelines for measurement |
| BS ISO 17657-2-2006 | 電阻焊.電阻焊的焊接電流測量.帶電流感應線圈的焊接電流表 | Resistance welding - Welding current measurement for resistance welding - Welding current meter with current sensing coil |
| BS ISO 17657-3-2006 | 電阻焊.電阻焊的焊接電流測量.電流感應線圈 | Resistance welding - Welding current measurement for resistance welding - Current sensing coil |
| BS ISO 17657-4-2006 | 電阻焊.電阻焊的焊接電流測量.校對系統 | Resistance welding - Welding current measurement for resistance welding - Calibration system |
| BS ISO 17657-5-2006 | 電阻焊.電阻焊的焊接電流測量.驗證焊接電流測量系統 | Resistance welding - Welding current measurement for resistance welding - Verification of welding current measuring system |
| BS ISO 18172-1-2007 | 儲氣瓶.可再充裝的焊接不銹鋼氣瓶.試驗壓力≤6MPa | Gas cylinders - Refillable welded stainless steel cylinders - Test pressure 6 MPa and below |
| BS ISO 18172-2-2007 | 儲氣瓶.可再充裝的焊接不銹鋼氣瓶.試驗壓力≥6MPa | Gas cylinders - Refillable welded stainless steel cylinders - Test pressure greater than 6 MPa |
| BS ISO 18207-2006 | 道路車輛.3.5噸以下拖車在疲勞試驗后聯軸節球體用焊接牽引支撐架的控制 | Road vehicles - Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing |
| BS ISO 20703-2007 | 儲氣瓶.可再填充的焊接鋁合金氣瓶.設計、結構和試驗 | Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing |
| BS ISO 22829-2007 | 電阻焊接.帶組合變壓器焊接槍用變壓器整流器.1000Hz頻率工作的變壓器整流器 | Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency |
| BS ISO 24394-2008 | 航空航天設備的焊接.焊接工和焊接操作工認證試驗.金屬部件的熔焊 | Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components |
| BS ISO 24497-3-2007 | 無損檢驗.金屬磁存儲器.焊接接頭的檢驗 | Non-destructive testing - Metal magnetic memory - Inspection of welded joints |
| BS ISO 4706-2008 | 氣瓶.可再填充焊接鋼瓶.試驗壓力≤60ba | Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below |
| BS ISO 6971-2002 | 焊接結構用彎板拉曳鏈、附件和鏈輪 | Cranked-link drag chains of welded construction, attachments and sprockets |
| BS ISO 6972-2002 | 焊接結構工程用彎板鏈、附件和鏈輪 | Cranked-link mill chains of welded construction, attachments and sprockets |
| BS ISO 857-2-2006 | 焊接和相關工藝.詞匯.軟釬焊和銅焊工藝及相關術語 | Welding and allied processes - Vocabulary - Soldering and brazing processes and related terms |
| BS L 112-1971 | 鋁-鎂(0.8)-硅(1)-錳(0.7)合金鍛坯和鍛件規范(溶液處理和沉淀處理)(適用于焊接) | Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 113-1971 | 鋁-鎂(0.8)-硅(1)-錳(0.7)合金薄板材和帶材規范(溶液處理和沉淀處理)(適用于焊接) | Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 114-1971 | 鋁-鎂(0.8)硅(1)-錳(0.7)合金管規范(溶液處理和沉淀處理)(壁厚度小于10mm)(適用于焊接) | Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 115-1971 | 鋁-鎂(0.8)硅(1)-錳(0.7)合金板規范(溶液處理,拉伸控制及沉淀處理)(厚度小于25mm)(適用于焊接) | Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS S 164-2002 | 航空航天系列.1%鉻-鉬鋼坯,棒材,鍛件和部件(1150對1300MPa:限制截面部分為16mm)(適用于焊接) | 1 % Chromium-molybdenum steel billets, bars, forgings and parts - (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding) |
| BS S 534-1969 | 鉻-鉬鋼薄板材和帶材規范(880/1080MPa)(適用于焊接) | Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding) |
| BS S 535-1969 | 鉻-鉬鋼薄板材和帶材規范(1150/1300MPa)(適用于焊接) | Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding) |
| BS T 64-1972 | 碳-錳鋼管材規范(550 N/mm<上標2>)(管外徑小于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable) |
| BS T 67-1972 | 18/10鉻-鎳耐腐蝕鋼管材規范(鈦穩定的:550 N/mm<上標2>)(可焊接) | Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable) |
| BS T 69-1972 | 冷拉18/10鉻-鎳耐腐蝕鋼管材規范(鈦穩定的:800 N/mm<上標2>)(可焊接) | Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable) |
| BS T 76-1978 | 鉻-鉬鋼管規范(770MPa)(可焊接) | Specification for chromium-molybdenum steel tube (770 MPa) (weldable) |
| BS T 77-1980 | 鉻-鉬鋼管材規范(900MPa)(可焊接) | Specification for chromium-molybdenum steel tube (900 MPa) (weldable) |
| DD ENV 10080-1996 | 混凝土加固用鋼材.可焊接的混凝土加強鋼筋B500.棒,環盤,已焊過的鋼筋網的交貨技術狀態 | Steel for the reinforcement of concrete. Weldable ribbed reinforcing steel B500. Technical delivery conditions for bars, coils and welded fabric |
| DD ENV 10220-1994 | 無縫鋼管和焊接鋼管.尺寸及單位長度質量 | Seamless and welded steel tubes. Dimensions and masses per unit length |
| PD ISO/TR 17663-2001 | 焊接.與焊接和相關工藝有關的熱處理的質量要求導則 | Welding. Guidelines for quality requirements for heat treatment in connection with welding and allied processes |
| 編號 | 中文名稱 | 英文名稱 |