| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CR 12361-1996 | 金屬材料焊接的破壞性試驗 宏觀和微觀檢驗用腐蝕劑 | Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination |
| CR 14599-2002 | 與EN 1792相關的焊接的術語及定義 | Terms and definitions for welding purposes in relation with EN 1792 |
| CR ISO 15608-2000 | 焊接 金屬材料分類體系指南（ISO/TR 15608:2000） | Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000) |
| CR ISO 17663-2001 | 焊接 焊接和類似加工熱處理質量要求指南（ISO/TR 17663:2001） | Welding - Guidelines for quality requirements for heat treatment in connection with welding and allied processes (ISO/TR 17663:2001) |
| EN 1011-1-1998+A1-2002 | 焊接 金屬材料焊接的推薦規范 第1部分：電弧焊接的通用指南 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 1011-2-2001 | 焊接 金屬材料焊接的推薦規范 第2部分：鐵素體鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels |
| EN 1011-3-2000 | 焊接 金屬材料焊接的推薦規范 第3部分：不銹鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels |
| EN 1011-4-2000 | 焊接 金屬材料焊接的推薦規范 第4部分：鋁和鋁合金的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| EN 1011-5-2003 | 焊接 金屬材料焊接的推薦規范 第5部分：復層鋼焊接 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
| EN 10120-1996 | 焊接氣瓶用鋼薄板及帶材 | Steel sheet and strip for welded gas cylinders |
| EN 10217-1-2002 | 壓力用途的焊接鋼管 交貨技術條件 第1部分：有規定室溫特性的非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10217-2-2002 | 壓力用途的焊接鋼管 交貨技術條件 第2部分：有規定高溫特性的電焊非合金及合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-3-2002 | 壓力用途的焊接鋼管 交貨技術條件 第3部分：合金細晶粒鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10217-4-2002 | 壓力用途的焊接鋼管 交貨技術條件 第4部分：有規定低溫特性的電焊非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
| EN 10217-5-2002 | 壓力用途的焊接鋼管 交貨技術條件 第5部分：有規定高溫特性的埋弧焊非合金及合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-6-2002 | 壓力用途的焊接鋼管 交貨技術條件 第6部分：有規定低溫特性的埋弧焊非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| EN 10219-1-1997 | 冷成型細晶粒鋼和非合金鋼的焊接結構空心型材 第1部分：交貨技術要求 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements |
| EN 10219-2-1997 | 冷成型細晶粒鋼和非合金鋼的焊接結構空心型材 第2部分：公差、尺寸和截面特性 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10220-2002 | 無縫和焊接鋼管 單位長度的尺寸和質量 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| EN 10223-4-1998 | 柵欄用鋼絲和鋼絲制品 鋼絲焊接網式柵欄 | Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
| EN 10223-7-2002 | 柵欄用鋼絲和鋼絲制品 第7部分：柵欄用鋼絲焊接板 | Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing |
| EN 10225-2001 | 固定海上結構用的可焊接結構鋼 交貨技術條件 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 10246-1-1996 | 鋼管的無損檢測 第1部分：證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN 10246-11-2000 | 鋼管的無損檢測 第11部分：表面缺陷探測用的無縫和焊接鋼管的液體滲透檢驗 | Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
| EN 10246-12-2000 | 鋼管的無損檢測 第12部分：表面缺陷探測用的無縫和焊接鐵磁鋼管的磁粉檢驗 | Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| EN 10246-13-2000 | 鋼管的無損檢測 第13部分：無縫和焊接鋼管（埋弧焊除外）自動全周界厚度的超聲檢驗 | Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| EN 10246-14-1999 | 鋼管的無損檢測 第14部分：層狀缺陷探測用的無縫和焊接鋼管(埋弧焊接除外)的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| EN 10246-15-2000 | 鋼管的無損檢測 第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10246-16-2000 | 鋼管的無損檢測 第16部分：層狀缺陷探測用的焊接鋼管焊縫附近區域的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| EN 10246-17-2000 | 鋼管的無損檢測 第17部分：層狀缺陷探測用的無縫和焊接鋼管端部的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| EN 10246-18-2000 | 鋼管的無損檢測 第18部分：層狀缺陷探測用的無縫和焊接鐵磁鋼管端部的磁粉檢驗 | Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| EN 10246-2-2000 | 鋼管的無損檢測 第2部分：證明液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管（埋弧焊除外） 的自動渦流 | Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| EN 10246-3-1999 | 鋼管的無損檢測 第3部分：缺陷探測用無縫和焊接鋼管(埋弧焊除外)的自動渦流檢驗 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10246-4-1999 | 鋼管的無損檢測 第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 10246-5-1999 | 鋼管的無損檢測 第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| EN 10246-7-1996 | 鋼管的無損檢測 第7部分：縱向缺陷探測用的無縫和焊接鐵磁鋼管(埋弧焊除外)的自動周界超聲檢驗 | Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
| EN 10273-2000 | 壓力用途的規定高溫度性能的熱軋可焊接鋼棒 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10296-1-2003 | 機械和一般工程用途的焊接圓形鋼管 交貨技術條件 第1部分：非合金鋼管和合金鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10305-2-2002 | 高精密度用途的鋼管 交貨技術條件 第2部分：冷拔焊接鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10305-3-2002 | 高精密度用途的鋼管 交貨技術條件 第3部分：冷定徑焊接鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10305-5-2003 | 高精密度用途的鋼管 交貨技術條件 第5部分：冷定徑方形和矩形焊接鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
| EN 10312-2002 | 傳送人類消耗的含水液體（包括水）的焊焊接不銹鋼管 交貨技術條件 | Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
| EN 1043-1-1995 | 金屬材料焊接的破壞試驗 硬度測試 第1部分：電弧焊接連接件的硬度試驗 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 1043-2-1996 | 金屬材料焊接的破壞試驗 硬度試驗 第2部分：焊接連接件的顯微硬度測試 | Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints |
| EN 1123-1-1999 | 廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部分：要求、測試和質量控制 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
| EN 1123-1/prA1-2002 | 廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部分：要求、測試和質量控制 修改A1 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1 |
| EN 1123-2-1999 | 廢水系統用帶套管和插口的縱向焊接熱浸鍍鋅鋼管管道及配件 第2部分：尺寸 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions |
| EN 1124-1-1999 | 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
| EN 1124-1/prA1-2002 | 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制 修改A1 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1 |
| EN 1124-2-1999 | 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道和配件 第2部分：系統S 尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions |
| EN 1124-3-1999 | 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第3部分：系統X 尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions |
| EN 12062-1997 | 焊接無損檢測 金屬材料的一般規則 | Non-destructive examination of welds - General rules for metallic materials |
| EN 12070-1999 | 焊接易耗品 耐蠕變鋼的電弧焊用絲狀焊條、金屬絲和棒 分級 | Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification |
| EN 12071-1999 | 焊接易耗品 耐蠕變鋼的氣體遮蔽金屬電弧焊用管狀焊條 分級 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification |
| EN 12072-1999 | 焊接易耗品 不銹鋼和耐熱鋼電弧焊用絲狀焊條、金屬絲和棒 分級 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification |
| EN 12073-1999 | 焊接易耗品 不銹鋼和耐熱鋼有或無氣體遮蔽金屬電弧焊接用管狀有芯焊條 分級 | Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification |
| EN 12074-2000 | 焊接易耗品 對焊接及有關工藝用易耗品的制造、供應和分配的質量要求 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| EN 12345-1998 | 焊接 帶圖示的有關焊接接頭的多語種術語 | Welding - Multilingual terms for welded joints with illustrations |
| EN 12493-2001 | 液化石油氣（ＬＰＧ）用焊接鋼罐 油槽車設計和制造 | Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture |
| EN 12517-1998 | 焊縫的無損檢驗 焊接接頭放射線檢驗 驗收等級 | Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
| EN 12534-1999 | 焊接消耗品 高強度鋼氣體保護金屬電弧焊用絲狀電極、焊絲和焊條和沉漬物 分類 | Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification |
| EN 12535-2000 | 焊接消耗品 高強度鋼氣體保護金屬電弧焊用管型藥芯焊條 分類 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification |
| EN 12536-2000 | 焊接消耗品 非合金鋼和抗蠕變鋼氣焊用焊條 分類 | Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification |
| EN 1254-1-1998 | 銅和銅合金 管件 第1部分：低溫焊接或纖焊接到銅管上的毛細管用端頭管件 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 12542-2002 | 地上的容積不大于13m3 立方米貯存液化石油氣（ＬＰＧ）用靜止的焊接圓形鋼罐 設計和制造 | Static welded steel cylindrical tanks, serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation above ground - Design and manufacture |
| EN 1256-1996 | 氣焊設備 焊接切割及類似加工設備的軟管附件規范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN 12573-1-2000 | 靜態無壓焊接熱塑料罐 第1部分：概述 | Welded static non-pressurized thermoplastic tanks - Part 1: General principles |
| EN 12573-2-2000 | 靜態無壓焊接熱塑料罐 第2部分：立式圓筒罐的計算 | Welded static non-pressurized thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks |
| EN 12573-3-2000 | 靜態無壓焊接熱塑料罐 第3部分：單層矩形罐的設計和計算 | Welded static non-pressurized thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks |
| EN 12573-4-2000 | 靜態無壓焊接熱塑料罐 第4部分：法蘭接頭的設計和計算 | Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints |
| EN 12732-2000 | 燃?xì)夤?yīng)系統 焊接鋼管 功能要求 | Gas supply systems - Welding steel pipework - Functional requirements |
| EN 12760-1999 | 閥門 鋼閥門套接焊接端 | Valves - Socket welding ends for steel valves |
| EN 12797-2000 | 銅焊 銅焊接頭的破壞性試驗 | Brazing - Destructive tests of brazed joints |
| EN 12799-2000 | 銅焊 銅焊接頭的破壞性試驗 | Brazing - Non-destructive examination of brazed joints |
| EN 12814-1-1999+AC-2003 | 熱塑性塑料半成品的焊接接頭試驗 第1部分：彎曲試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test |
| EN 12814-2-2000 | 熱塑性塑料半成品的焊接接頭試驗 第2部分：拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test |
| EN 12814-3-2000 | 熱塑性塑料半成品的焊接接頭試驗 第3部分：拉伸蠕變?cè)囼?yàn) | Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test |
| EN 12814-4-2001 | 熱塑性塑料半成品的焊接接頭試驗 第4部分：剝落試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
| EN 12814-5-2000 | 熱塑性塑料半成品的焊接接頭試驗 第5部分：目測 | Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination |
| EN 12814-6-2000 | 熱塑性塑料半成品的焊接接頭試驗 第6部分：低溫拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
| EN 12814-7-2002 | 熱塑性塑料半成品的焊接接頭試驗 第7部分：采用腰形試樣的拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN 12814-8-2001+AC-2003 | 熱塑性塑料半成品的焊接接頭試驗 第8部分：要求 | Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements |
| EN 12862-2000 | 可運輸氣瓶 可移動再充式焊接鋁合金氣瓶的設計和結構規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 1289-1998+A1-2002 | 焊接的無損檢驗 焊接的熔深試驗 驗收等級 | Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels |
| EN 1290-1998+A1-2002 | 焊接的無損檢驗 焊接的磁性粒子檢驗 | Non-destructive examination of welds - Magnetic particle examination of welds |
| EN 1291-1998+A1-2002 | 焊接的無損檢驗 焊接的磁性粒子試驗 驗收等級 | Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels |
| EN 13067-2003 | 塑料焊接人員 焊工資質測試 熱塑性塑料焊接組件 | Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies |
| EN 13100-1-1999 | 熱塑性塑料半成品焊接接頭的無損檢驗 第1部分：外觀檢查 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination |
| EN 13110-2002 | 可移動再充式焊接液化石油氣鋁瓶 設計和構造 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction |
| EN 1320-1996 | 金屬材料焊接的破壞試驗 斷裂試驗 | Destructive tests on welds in metallic materials - Fracture test |
| EN 1321-1996 | 金屬材料焊接的破壞試驗 焊接的宏觀和微觀檢驗 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| EN 1326-1996 | 氣焊設備 氣體釬焊和定位焊接用小型設備 | Gas welding equipment - Small kits for gas brazing and welding |
| EN 1327-1996 | 氣焊設備 焊接和相關工藝用熱塑軟管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 13322-1-2003 | 可移動氣瓶 再充式焊接鋼氣瓶 設計與結構 第1部分：碳鋼 | Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 1: Carbon steel |
| EN 13322-2-2003 | 可移動氣瓶 再充式焊接不銹鋼氣瓶 設計與結構 第2部分：不銹鋼 | Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 2: Stainless steel |
| EN 13347-2002 | 銅和銅合金 焊接和黃銅焊用棒和線 | Copper and copper alloys - Rod and wire for welding and braze welding |
| EN 13918-2003 | 氣焊設備 焊接、切割及關工藝中所用的氣瓶上的集成流量計調壓器 分類、規范和試驗方法 | Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests |
| EN 14075-2002 | 系列生產的液化石油氣（LPG）儲存量不大于13立方米的安裝在地下的固定式焊接鋼圓罐 設計和制造 | Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation underground - Design and manufacture |
| EN 14140-2003 | 可運輸?shù)目芍貜?fù)充裝的焊接液化石油氣鋼瓶 （LPG） 設計和結構的選擇 | Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction |
| EN 14163-2001 | 石油和天然氣工業 管道運輸系統 管道的焊接 | Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified) |
| EN 1418-1997 | 焊接人員 設定完全機械化和自動化金屬材料焊接的熔焊和阻焊的焊接操作者的批準測試 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 1435-1997+A1-2002 | 焊接的無損檢驗 焊接接縫的X射線照相檢驗 | Non-destructive examination of welds - Radiographic examination of welded joints |
| EN 1439-1996 | 液化石油氣(LPG)用可運輸可再充填的焊接鋼瓶 充氣前 充氣時和充氣后的檢驗程序 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling |
| EN 1440-1996+AC-1999 | 液化石油氣(LPG)用可運輸可再充填的焊接鋼 周期重復鑒定 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification / Note: To be replaced by prEN 1440 (2003-09). |
| EN 1442-1998+A1-2002+AC-1999 | 液化石油氣(LPG)用可運輸可再充填焊接鋼氣瓶 設計和生產 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
| EN 14612-2003 | 航天產品保證 自動機床波動焊接的核準和批準 | Space product assurance - Verification and approval of automatic machine wave soldering |
| EN 1592-1-1997 | 鋁和鋁合金 HF接縫焊接管 第1部分：檢驗和交貨技術條件 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
| EN 1592-2-1997 | 鋁和鋁合金 HF接縫焊接管 第2部分：機械性能 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1592-3-1997 | 鋁和鋁合金 HF接縫焊接管 第3部分：圓形管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
| EN 1592-4-1997 | 鋁和鋁合金 HF接縫焊接管 第4部分：方形、矩形和異形管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 1597-1-1997 | 焊料 試驗方法 第1部分：鎳和鎳合金鋼中完全焊接金屬試驗樣品用試件 | Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys |
| EN 1597-2-1997 | 焊接耗材 試驗方法 鋼單焊和雙焊技術試驗樣品試件的制備 | Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel |
| EN 1597-3-1997 | 焊接耗材 試驗方法 第3部分：角焊接中焊料定位能力的試驗 | Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld |
| EN 1598-1997+A1-2001 | 焊接和類似加工的健康和安全 電弧焊工藝用透明焊接隔板、板條和屏蔽 | Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes |
| EN 1599-1997 | 焊接耗材 抗蠕變鋼手工金屬電弧焊接涂覆電極 分類 | Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification |
| EN 1600-1997 | 焊接消耗品 不銹和耐熱鋼手工金屬電弧焊接涂覆電極 分類 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification |
| EN 1668-1997 | 焊接耗材 非合金和細晶粒鋼的惰性氣體保護鎢極焊用焊條 焊絲和熔敷 分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| EN 169-2002 | 個人眼睛保護裝置 在焊接及相關工藝中用的濾光器 透光度要求和推薦利用濾光器 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| EN 1708-1-1999 | 焊接 鋼件的焊接接頭基礎詳細資料 第1部分：壓力用途部件 | Welding - Basic weld joint details in steel - Part 1: Pressurized components |
| EN 1708-2-2000 | 焊接 鋼件的焊接接頭基礎詳細資料 第2部分：無內部壓力用途部件 | Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components |
| EN 1711-2000 | 焊接無損檢驗 通過綜合平面分析對焊接的渦流檢驗 | Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis |
| EN 1712-1997 | 焊接無損檢驗 焊接接頭超聲波檢測 驗收水平 | Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
| EN 1713-1998 | 焊接無損檢驗 超聲波檢驗 焊接標記的特性表示 | Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds |
| EN 1714-1997 | 焊接無損檢驗 焊接接頭超聲檢驗 | Non destructive examination of welds - Ultrasonic examination of welded joints |
| EN 1715-3-1997+AC-1998 | 鋁和鋁合金 拉制坯料 第3部分：機械應用的特殊要求(包括焊接) | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
| EN 1715-4-1997 | 鋁和鋁合金 拉制坯料 第4部分：焊接應用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
| EN 1737-1998 | 高壓多孔混凝土或開放結構輕集料混凝土預制件用鋼筋板或框架焊接接頭剪切強度的測定 | Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 175-1997 | 個人防護 焊接和類似加工中眼睛和面部的防護設備 | Personal protection - Equipment for eye and face protection during welding and allied processes |
| EN 1778-1999 | 焊接熱塑結構特性值 熱塑設備設計的允許應力和模量的測定 | Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment |
| EN 1792-2003 | 焊接 焊接和相關工多語種術語表 | Welding - Multilingual list of terms for welding and related processes |
| EN 1803-2002 | 可運輸氣瓶 焊接碳鋼周期檢驗和試驗 | Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 22553-1994 | 焊接、硬釬焊和軟釬焊連頭 圖樣上的符號表示法 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN 2560-1998 | 航空航天系列 個人眼睛保護設備 有可變遮避物或雙層遮避物的焊接濾光鏡 | Aerospace series - Carbon fibre preimpregnates - Determination of the resin flow |
| EN 2574-1990 | 航空航天系列 焊接規范 制圖資料 | Aerospace series; welds; information on drawings |
| EN 25817-1992 | 鋼弧焊接頭 缺點質量分級指南 | Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992) |
| EN 2591-424-2001 | 航空航天系列 光電連接元件 試驗方法 第424部分：無焊接纏繞連接 拆卸力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-425-2001 | 航空航天系列 光電連接元件 試驗方法 第425部分：無焊接纏繞連接 展開能力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2656-2001 | 航空航天系列 連接管 焊接的連接端幾何結構 | Aerospace series - Pipe coupling - Coupling end, welded, Geometric configuration |
| EN 26848-1991 | 惰性氣體保護電弧焊接以及等離子氣體切割和焊接用的鎢極 編碼 | Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984) |
| EN 27286-1991 | 電阻焊接設備的圖形符號 | Graphical symbols for resistance welding equipment (ISO 7286:1986) |
| EN 27963-1992 | 鋼件的焊縫 2號超聲波焊接探傷校準塊 | Welds in steel; calibration block no. 2 for ultrasonic examination of welds (ISO 7963:1985) |
| EN 288-1-1992+A1-1997 | 金屬材料焊接程序規范和鑒定 第1部分：熔焊的通用規則 | Specification and qualification of welding procedures for metallic materials; part 1: general rules for fusion welding |
| EN 288-2-1992+A1-1997 | 金屬材料焊接程序規范和鑒定 第2部分：電弧焊焊接程序規范 | Specification and approval of welding procedures for metallic materials; part 2: welding procedure specification for arc welding / Note: To be replaced by prEN ISO 15609-1 (2003-10) (in preparation). |
| EN 288-3-1992+A1-1997 | 金屬材料焊接程序規范和鑒定 第3部分：鋼的電弧焊焊接程序試驗 | Specification and approval of welding procedures for metallic materials; part 3: welding procedure tests for the arc welding of steels |
| EN 288-4-1992+A1-1997 | 金屬材料焊接程序規范和鑒定 第4部分：鋁及其合金的電弧焊焊接程序試驗 | Specification and approval of welding procedures for metallic materials; part 4: welding procedure tests for the arc welding of aluminium and its alloys |
| EN 288-5-1994 | 金屬材料焊接程序規范和鑒定 第5部分：使用已被認可的焊接耗材對電弧焊的鑒定 | Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding |
| EN 288-6-1994 | 金屬材料焊接程序規范和鑒定 第6部分：有關以前經驗的鑒定 | Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience |
| EN 288-7-1995 | 金屬材料焊接程序規范和鑒定 第7部分：使用標準焊接程序的電弧焊的鑒定 | Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding |
| EN 288-8-1995 | 金屬材料焊接程序規范和鑒定 第8部分：用預焊接試驗進行鑒定 | Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test |
| EN 288-9-1999 | 金屬材料焊接程序規范和鑒定 第9部分：傳輸管道陸地和海上場所對接焊中管道焊接用焊接程序試驗 | Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| EN 30042-1994 | 鋁和鋁焊合金弧焊接頭 缺陷質量分級指南 | Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) |
| EN 3081-2001 | 航空航天系列 鈦合金管連接件8°30′修理用帶動態梁密封端頭的焊接箍圈 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair |
| EN 3082-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用焊接端的艙壁管接頭 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, bulkhead welded end, for repair |
| EN 3083-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用長焊接端艙壁管接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded end, for repair |
| EN 3084-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用焊接端螺紋管接頭 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, welded end threaded for repair |
| EN 3243-2001 | 航空航天系列 鈦合金管連接件8°30′ 帶動態梁密封端頭的焊接箍 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrule, welded, with dynamic beam seal end |
| EN 3247-2001 | 航空航天系列 鈦合金管連接件8°30′艙壁焊接端管接頭 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead welded end |
| EN 3272-2001 | 航空航天系列 鈦合金管連接件8°30′帶動態梁密封端頭的焊接金屬箍 幾何結構 | Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for ferrule, welded; Geometric configuration |
| EN 3561-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′具有動態梁密封端箍圈 焊接和軋制管端口 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end |
| EN 3688-2001+AC-2003 | 航空航天系列 鈦合金焊接管用的T形環填縫金屬 14000 kPa標準壓強 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure |
| EN 3689-2001+AC-2003 | 航空航天系列 鈦合金焊接管用的T形環填縫金屬 28000 kPa標準壓強 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure |
| EN 379-2003 | 人眼防護 自動焊接濾光片 | Personal eye-protection - Automatic welding filters |
| EN 3852-2002 | 航空航天系列 鈦合金TI-P64001 球形60°管連接 焊接螺紋式直聯管節 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| EN 3854-2002 | 航空航天系列 鈦合金TI-P64001 球形60°管連接 焊接金屬箍 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Ferrules, welded |
| EN 3857-2002 | 航空航天系列 鈦合金TI-P64001 球形60°管連接 焊接90°彎頭 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Elbows 90? welded |
| EN 3868-2003 | 航空航天系列 管連接 松套法蘭和密封墊 TI-P64001鈦合金焊接法蘭連接器 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 / Note: To be replaced by prEN 3868 (2003-05). |
| EN 3882-2001 | 航空航天系列 耐熱合金NI-WH1801(NiCr20Co18Ti3Al2) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding |
| EN 3883-2001 | 航空航天系列 耐熱合金 NI-WH2301(NiCr22Fe19Mo9Co2) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding |
| EN 3884-2001 | 航空航天系列 耐熱合金 NI-WH2601(NiCr19Nb5Mo3Ti) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding |
| EN 3885-2001 | 航空航天系列 耐熱合金 NI-WH3601(NiCr22Mo9Nb4) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding |
| EN 3886-2001 | 航空航天系列 耐熱合金 NI-WH1303(NiCo20Cr20Mo5Ti2AI) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2AI) - Filler metal for welding |
| EN 3887-2001 | 航空航天系列 耐熱合金 CO-WH4101(CoCr20W15Ni） 焊接用填縫金屬 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| EN 3888-2001 | 航空航天系列 耐熱合金 CO-WH1402(CoCr22Ni22W15) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| EN 3889-2001 | 航空航天系列 FE-WM3801 (X5CrNiCu17-4)鋼 焊接用填縫金屬 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
| EN 3890-2001 | 航空航天系列 FE-WM1502 (X11CrNiMoVN12-3)鋼 焊接用填縫金屬 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
| EN 3892-2001 | 航空航天系列 鈦合金 TI-W64001 焊接用填縫金屬 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding |
| EN 3893-2001 | 航空航天系列 鈦合金 TI-W19001 焊接用填縫金屬 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding |
| EN 3894-2001 | 航空航天系列 耐熱合金 NI-WD3201(NiMo25Fe6Cr5） 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding |
| EN 3895-2001 | 航空航天系列 耐熱合金 NI-WH3901(NiCr16Mo15) 焊接用填縫金屬 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding |
| EN 3896-2001 | 航空航天系列 FE-WM1501 (X13CrNiMoCo12-3-2-2)鋼 焊接用填縫金屬 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding |
| EN 3897-2001 | 航空航天系列 FE-WA4801 (X6CrNiMnNb18-10)鋼 焊接用填縫金屬 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding |
| EN 4019-2001 | 航空航天系列 鈦合金管連接 8°30′90°焊接端彎頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°welded end |
| EN 4020-2001 | 航空航天系列 鈦合金管連接 8°30′90°彎頭 有推力絲螺母焊接端 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90° welded end with thrust wire nut |
| EN 4022-2001 | 航空航天系列 鈦合金管連接 8°30′ 艙壁焊接端90°彎頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°bulkhead, welded end |
| EN 4024-2001 | 航空航天系列 鈦合金管連接 8°30′有絲推力螺母焊接端45°彎頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45°welded end with thrust wire nut |
| EN 4058-2001 | 航空航天系列 鈦和鈦合金用焊接填縫條和填縫絲 直徑 0.5 mm≤D≤ 5.0 mm 尺寸 | Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
| EN 4059-2001 | 航空航天系列 鋼焊接用填縫條和填縫絲 直徑0,5 mm≤D≤5,0 mm 尺寸 | Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
| EN 4060-2001 | 航空航天系列 耐熱合金焊接用填縫條和填縫絲 直徑 0.5 mm ≤D≤5.0 mm 尺寸 | Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions |
| EN 4183-2001 | 航空航天系列 鈦合金管連接8°30′ 焊接端 ９０°彎頭 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends |
| EN 4184-2001 | 航空航天系列 鈦合金管連接8°30′ 焊接端 ４５°彎頭 | Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Elbows 45? welded ends |
| EN 4188-2001 | 空航天系列 鈦合金管連接8°30′ 焊接端艙壁９０度彎頭 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long, welded end |
| EN 4233-2001 | 航空航天系列 鈦合金管連接 8°30′ 焊接螺紋管接頭 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
| EN 4324-2001 | 航空航天系列 鋁合金AL-W42201 焊接用填縫金屬桿 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod |
| EN 4325-2001 | 航空航天系列 耐熱合金 NI-WH1302(NiCr20Co13Mo4Ti3Al) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod |
| EN 4326-2001 | 航空航天系列 耐熱合金 CO-WH4102(CoCr28W20Ni5V1) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod |
| EN 4327-2001 | 航空航天系列 耐熱合金CO-WH1401(CoCr26Ni11W8) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod |
| EN 4328-2002 | 航空航天系列 鋼 FE-WM1601 (X18CrWNi13-3-2) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod |
| EN 4329-2001 | 航空航天系列 耐熱合金NI-WH0001(NiCr20) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod |
| EN 4330-2002 | 航空航天系列 鋼 FE-WA4802 (X8CrNiMn27-22-2) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod |
| EN 4331-2002 | 航空航天系列 鋼 FE-WL1804 (25CrMnMo4-2-2) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod |
| EN 4332-2002 | 航空航天系列 鋼 FE-WL1805 (8CrMnMo12-4-9) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod |
| EN 4333-2002 | 航空航天系列 鋼 FE-WL1805 (X5CrNiCoMoWMn21-20-20-3-3-2) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod |
| EN 4334-2002 | 航空航天系列 鋼 FE-WL1806 (15CrMnMoV5-4-9-3) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod |
| EN 4335-2002 | 航空航天系列 鋼 FE-WA2602 (X4NiCrTiMoV26-15) 焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod |
| EN 4336-2002 | 航空航天系列 鋼 FE-WA3801 (X4CrNiMn20-10-2) 焊接用填縫金、絲和桿 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod |
| EN 4337-2001 | 航空航天系列 耐熱合金 NI-WH8901(NiCr16Ti3Mn2) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod |
| EN 4338-2001 | 航空航天系列 耐熱合金NI-WH3902(NiCr25Mo10C) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod |
| EN 4339-2001 | 航空航天系列 耐熱合金 CO-WH4001(CoCr29W9) 焊接用填縫金屬絲和桿 | Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding; Wire and rod |
| EN 4340-2002 | 航空航天系列 鎂合金 MG-W68001 焊接用填縫金屬絲和桿 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod |
| EN 4341-2001 | 航空航天系列 鋁合金 AL-W46431 焊接用填縫金屬絲和桿 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod |
| EN 4342-2001 | 航空航天系列 鈦TI-W99001 焊接用填縫金屬絲和桿 | Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
| EN 4343-2002 | 航空航天系列 鋼 FE-WM1001(X13Cr12) 焊接填縫金屬絲和桿 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod |
| EN 4344-2001 | 航空航天系列 鋼 FE-WM1002 (X13Cr13)焊接用填縫金屬絲和桿 | Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding; Wire and rod |
| EN 439-1994 | 焊接消耗品 電弧焊和切割用保護氣體 | Welding consumables - Shielding gases for arc welding and cutting |
| EN 440-1994 | 焊接消耗品 非合金與細粒鋼的氣體保護金屬電弧焊用絲狀電極和沉積物 分類 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| EN 4549-2003 | 航空航天系列 耐熱鋼或耐熱鎳基合金聯管節 焊接端頭 設計結構 英制系列 | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded; Design configuration; Inch series |
| EN 4552-2003 | 航空航天系列 耐熱鋼37度球形聯管節 焊接直接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end; Inch series |
| EN 4553-2003 | 航空航天系列 耐熱鋼37度球形聯管節 焊接90度彎接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Elbow 90?nipples, welded end; Inch series |
| EN 4555-2003 | 航空航天系列 耐熱鋼37度聯管節 焊接箍 英制系列 | Aerospace series - Pipe coupling 37? in heat resisting steel - Ferrules, welded end; Inch series |
| EN 4561-2003 | 航空航天系列 耐熱鋼焊接聯管節 90度彎管 英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90? Inch series |
| EN 4562-2003 | 航空航天系列 耐熱鋼焊接聯管節 變徑管 英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors; Inch series |
| EN 4563-2003 | 航空航天系列 耐熱鋼焊接聯管節 T形接頭 英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees; Inch series |
| EN 470-1-1995+A1-1998 | 焊接和類似操作用防護服 第1部分：一般要求 | Protective clothing for use in welding and allied processes - Part 1: General requirements |
| EN 499-1994 | 焊接消耗品 非合金與細粒鋼的手工金屬電弧焊用包劑焊條 分類 | Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification |
| EN 50069-1991+A1-1993 | 充氣高壓開關設備和控制設備用鑄鋁合金和鍛鋁合金焊接的混合材料 外殼規范 | Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear |
| EN 514-2000 | 門窗建造用未增塑聚氯乙烯型材 焊接彎頭和T型接頭強度的測定 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T joints |
| EN 531-1995+A1-1998 | 熱環境中工人的防護服(不包括消防服和焊接服) | Protective clothing for industrial workers exposed to heat (excluding firefighters and welders clothing) |
| EN 559-2003 | 氣焊設備 焊接、切割和同類處理用橡膠軟管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| EN 560-1994 | 氣焊設備 焊接、切割和同類處理用設備的軟管連接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| EN 561-2002 | 氣焊設備 焊接、切割和同類處理用斷路閥門快速連接器 | Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| EN 562-2003 | 氣焊設備 焊接、切割和同類處理用壓力計 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
| EN 60068-2-58-1999 | 環境試驗 第2-58部分：試驗 試驗Td：表面安裝元器件用可焊性、耐金屬化溶融和耐焊接熱試驗方法 | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:1999) |
| EN 60512-12-6-1996 | 電子設備用機電元件 基本試驗規程和測量方法 第12部分：可釬焊性試驗方法第6節：試驗12f：機械釬焊焊接過 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering (IEC 60512-12-6:1996) |
| EN 60512-12-7-2001 | 電子設備用連接器 試驗和測量 第12-7:可焊接試驗 試驗12g 可焊性別 濕平衡法 | Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests; Test 12g: Solderability, wetting balance method (IEC 60512-12-7:2001) |
| EN 60512-16-20-1996 | 電子設備用機電元件 基本試驗規程和測量方法 第16部分：觸點和終端機械試驗 第20節：試驗１６t 機械強 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC |
| EN 60534-3-3-1998 | 工業過程控制閥 第三部分：尺寸 對接焊接 兩向 球型 垂直模式控制閥的末端對末端尺寸 | Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998) |
| EN 60749-15-2003 | 半導體器件 機械和氣候試驗方法 第15部分：透孔安裝設備對焊接溫度的阻抗 | Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 60749-15:2003) / Note: Endorsement notice |
| EN 60974-1-1998+A1-2000+A2-2003 | 電弧焊設備 第１部分：焊接電源 | Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:1998) |
| EN 60974-12-1995 | 弧焊設備 第12部分：焊接電纜的連接器 | Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified) |
| EN 61076-4-107-2001 | 電子設備用連接器 第4-107部分：有質量評定的印制板連接器 印制電路板用基本網格為2.0 mm、固定部分帶有 | Connectors for electronic equipment-part 4-107:Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2, 0 mm, fixed part with solder and press-in terminations for printed boards |
| EN 61188-5-1-2002 | 印制電路板和印制電路板組件 設計和使用 第5-1部分：附著(焊接/接合)的考慮 通用要求 | Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations; Generic requirements (IEC 61188-5-1:2002) / Note: Endorsement notice |
| EN 61188-5-2-2003 | 印制電路板和印制電路板組件 設計和使用 第5-2部分：附著(焊接/接合)的考慮 分立元件 | Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations; Discrete components (IEC 61188-5-2:2003) / Note: Endorsement notice |
| EN 61188-5-6-2003 | 印制電路板和印制電路板組件 設計和使用 第5-6部分：附著(焊接/接合)的考慮 四邊帶有J導線的晶片載體 | Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003) / Note: Endorsement notice |
| EN 61191-1-1998 | 印刷電路板組件 第1部分：總規范 使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 | Printed board assemblies - Part 1: Generic specification: Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998) |
| EN 61191-2-1998 | 印刷電路板組件 第2部分：分規范 表面安裝焊接組件的要求 | Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998) |
| EN 61191-3-1998 | 印刷電路板組件 第3部分：分規范 通孔安裝焊接組件的要求 | Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998) |
| EN 61191-4-1998 | 印刷電路板組件 第4部分：分規范 端點焊接組件的要求 | Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998) |
| EN 719-1994 | 焊接配合 任務和責任 | Welding coordination - Tasks and responsibilities |
| EN 729-1-1994 | 焊接質量要求 金屬材料熔焊 第1部分：選擇和使用指南 | Quality requirements for welding - Fusion welding of metallic materials - Part 1: Guidelines for selection and use |
| EN 729-2-1994 | 焊接質量要求 金屬材料熔焊 第2部分：綜合質量要求 | Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements |
| EN 729-3-1994 | 焊接質量要求 金屬材料熔焊 第3部分：標準質量要求 | Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standard quality requirements |
| EN 729-4-1994 | 焊接質量要求 金屬材料熔焊 第4部分：基本質量要求 | Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements |
| EN 756-1995 | 焊接消耗品 非合金和細精粒鋼埋弧焊用電焊條和電焊劑混合物 分類 | Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| EN 757-1997 | 焊接消耗品 高強度鋼手工金屬弧焊用涂層焊條 分類 | Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
| EN 758-1997 | 焊接消耗品 帶和不帶氣體保護殼的非合金鋼及細粒鋼金屬電弧焊接用管狀芯焊條 分類 | Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification |
| EN 759-1997 | 焊接消耗品 焊接填充金屬的交貨技術條件 產品型號、尺寸、公差和標志 | Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking |
| EN 760-1996 | 焊接消耗品 埋弧焊用焊劑 分類 | Welding consumables - Fluxes for submerged arc welding - Classification |
| EN 804-1994 | 塑料管道系統 壓力管道溶焊接頭的噴射鑄造插接部件 瞬時內部液壓阻力的試驗方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| EN 846-3-2000 | 磚石結構輔助部件試驗方法 第3部分：預制底層接縫加固焊接剪切負荷量的測定 | Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement |
| EN 874-1995 | 氣焊設備 圓柱筒焊接用氧/燃料氣體焊炬（切割機型） 結構型式、一般規范和試驗方法 | Gas welding equipment - Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel - Type of construction, general specifications, test methods |
| EN 875-1995 | 金屬材料焊接的破壞試驗 沖擊試驗 試樣定位、槽口取向和檢驗 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| EN 876-1995 | 金屬材料焊接的破壞試驗 熔焊接頭中焊接金屬的縱向拉伸試驗 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN 895-1995 | 金屬材料焊接的破壞試驗 橫向抗拉試驗 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 910-1996 | 金屬材料焊接的破壞試驗 彎曲試驗 | Destructive tests on welds in metallic materials - Bend tests |
| EN ISO 1071-2003 | 焊接消耗品 鑄鐵熔焊用藥劑焊極、焊絲、焊條和管關芯焊極 分類 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2003) |
| EN ISO 10882-1-2001 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第1部分：空氣中粒子取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001) |
| EN ISO 10882-2-2000 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第2部分：氣體取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 13916-1996 | 焊接 預熱溫度、道間溫度和預熱維持溫度測量的指南 | Welding - Guidance for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) |
| EN ISO 13918-1998 | 焊接 電弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998) |
| EN ISO 13919-1-1996 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第1部分：鋼 | Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13919-2-2001 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第2部分：鋁及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 13920-1996 | 焊接 焊接結構的一般公差 長度和角度的尺寸 形狀和位置 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
| EN ISO 14114-1999 | 氣焊設備 焊接、切割及相關工藝用的乙炔匯流系統 一般要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999) |
| EN ISO 14329-2003 | 電阻焊接 焊縫的破環性檢驗 電阻點焊、縫焊和凸焊焊縫的疲勞類型和幾何量測量 | Resistance welding - Destructive test of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003) |
| EN ISO 14372-2001 | 焊接耗材 通過測量擴散氫方法測定手工電弧焊 焊條的抗?jié)裥? | Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000) |
| EN ISO 14554-1-2000 | 焊接質量要求 金屬材料的電阻焊接 第1部分：完整質量要求 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000) |
| EN ISO 14554-2-2000 | 焊接質量要求 金屬材料的電阻焊接 第2部分：基本質量要求 | Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000) |
| EN ISO 14555-1998 | 焊接 金屬材料的電弧螺栓焊 | Welding - Arc stud welding of metallic materials (ISO 14555:1998) |
| EN ISO 14744-1-2000 | 焊接 電子束焊接機的驗收檢驗 第1部分：原理和驗收條件 | Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000) |
| EN ISO 14744-2-2000 | 焊接 電子束焊接機的驗收檢驗 第2部分：加速電壓特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
| EN ISO 14744-3-2000 | 焊接 電子束焊接機的驗收檢驗 第3部分：電子束電流特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
| EN ISO 14744-4-2000 | 焊接 電子束焊接機的驗收檢驗 第4部分：焊接速度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000) |
| EN ISO 14744-5-2000 | 焊接 電子束焊接機的驗收檢驗 第5部分：偏轉精度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
| EN ISO 14744-6-2000 | 焊接 電子束焊接機的驗收檢驗 第6部分：焊點位置穩定性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| EN ISO 15011-1-2002 | 焊接和有關工藝中的衛生和安全 電弧焊產生的煙塵和氣體取樣的實驗室方法 第1部分：顆粒煙塵分析取樣和產 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume (ISO 15011-1:2002) |
| EN ISO 15011-2-2003 | 焊接和有關工藝中的健康和安全 電弧焊產生的煙塵和氣體取樣的實驗室方法 第2部分：除臭氧外、各種氣體產 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003) |
| EN ISO 15011-3-2002 | 焊接和有關工藝中的健康和安全 電弧焊產生的煙塵和氣體取樣的實驗室方法 第3部分：在固定點測定臭氧濃度 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002) |
| EN ISO 15609-2-2001 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第2部分：氣焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001) |
| EN ISO 15614-11-2002 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第11部分：電子和激光束焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| EN ISO 15614-8-2002 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第8部分：管對管板接頭焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
| EN ISO 15615-2002 | 氣焊設備 焊接、切割及相關工藝用多種乙炔發生器 高壓裝置中的安全要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002) |
| EN ISO 15616-1-2003 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第1部分：一般原則、驗收條件 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN ISO 15616-2-2003 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第2部分：靜止及動態精度的測量 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN ISO 15616-3-2003 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第3部分：氣流量及氣壓測量儀的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN ISO 15618-1-2001 | 水下焊接的焊工資格認可試驗 第1部分：超高壓濕焊的潛水焊工 | Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001) |
| EN ISO 15618-2-2001 | 水下焊接的焊工資格認可試驗 第2部分：超高壓干焊的潛水員焊工和焊接操作員 | Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN ISO 15620-2000 | 焊接 金屬材料的摩擦焊接 | Welding - Friction welding of metallic materials (ISO 15620:2000) |
| EN ISO 15630-2-2002 | 鋼筋混凝土和預應力混凝土用鋼筋 試驗方法 第2部分：焊接鋼筋網 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002) |
| EN ISO 17652-1-2003 | 焊接 焊接和相關工藝車間底火的試驗 第1部分：一般要求 | Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003) |
| EN ISO 17652-2-2003 | 焊接 焊接和相關工藝車間底火的試驗 第2部分：車間底火的焊接特性 | Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| EN ISO 17652-3-2003 | 焊接 焊接和相關工藝車間底火的試驗 第3部分：熱切割 | Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
| EN ISO 17652-4-2003 | 焊接 焊接和相關工藝車間底火的試驗 第4部分：焰氣排放 | Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
| EN ISO 21670-2003 | 帶凸緣的六角焊接螺母 | Hexagon weld nuts with flange (ISO 21670:2003) |
| EN ISO 2503-1998+AC-1998 | 氣焊設備 焊接、切割及相關工藝用300bar以下的氣瓶調壓器 | Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998) |
| EN ISO 3677-1995 | 軟釬焊 硬釬焊和釬接焊接用填充金屬 符號規定 | Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992) |
| EN ISO 3690-2000 | 焊接與相關工藝 在鐵素體電弧焊金屬中氫含量的測定 | Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000) |
| EN ISO 4063-2000 | 焊接和相關工藝 工藝名稱和參照代碼 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) |
| EN ISO 5172-1996 | 焊接、切割及加熱用手工焊炬規范和試驗 | Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995) |
| EN ISO 6520-1-1998 | 焊接和相關工藝 金屬材料中幾何缺陷的分類 第1部分：熔焊 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998) |
| EN ISO 6520-2-2001 | 焊接和相關工藝 金屬材料中幾何缺陷的分類 第2部分：壓力焊接 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001) |
| EN ISO 6847-2001 | 焊接耗材 化學分析用焊接金屬的熔敷 | Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000) |
| EN ISO 6947-1997 | 焊接 工作位置 傾角與轉角的定義 | Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993) |
| EN ISO 7291-2001 | 氣焊設備 用于300bar以下的焊接、切割及相關工藝用匯流系統上的壓力調節器 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999) |
| EN ISO 8166-2003 | 電阻焊接 用固定機械設備評定點焊焊條壽命的程序 | Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machines settings (ISO 8166:2003) |
| EN ISO 8205-1-2002 | 電阻焊接水冷次級線圈連接電纜 第1部分：雙導體連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |
| EN ISO 8205-2-2002 | 電阻焊接水冷次級線圈連接電纜 第2部分：單根導線連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) |
| EN ISO 8205-3-1996 | 電阻焊接水冷次級線圈連接電纜 第3部分：試驗要求 | Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993) |
| EN ISO 8249-2000 | 焊接 奧氏體和成雙鐵素體奧氏體鎳－鉻不銹鋼焊接金屬中鐵素體數(FN)的測定 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| EN ISO 8434-4-2000 | 用于流體傳動和一般用途的金屬管接頭 第4部分：帶O形圈焊接接頭體的24度錐形管接頭 | Metallic tube connections for fluid power and general use - Part 4: 24?degrees cone connectors with O-ring weld-on nipples (ISO 8434-4:1995) |
| EN ISO 9692-2-1998 | 焊接和相關工藝 接頭的制備 第2部分：鋼的埋弧焊 | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3-2001 | 焊接和相關工藝 接頭制備的建議 第3部分：鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| EN ISO 9692-4-2003 | 焊接和相關工藝 接頭制備的建議 第4部分：復合鋼 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
| EN ISO 9956-10-1996 | 金屬材料焊接工藝規程及認可 第10部分：電子束焊接工藝規程 | Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding (ISO 9956-10:1996) |
| EN ISO 9956-11-1996 | 金屬材料焊接工藝規程及認可 第11部分：激光束焊接工藝規程 | Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding (ISO 9956-11:1996) |
| ENV 10080-1995 | 混凝土加固用鋼材 為適于焊接而加筋的混凝土鋼B500 棒、 環盤 已焊過的鋼筋網的交貨技術條件 | Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric / Note: Withdrawn by mistake |
| ENV 50184-1996 | 電弧焊接設備的確認 | Validation of arc welding equipment (BS 7570:1992) |
| prEN 10025-3-2000 | 熱軋結構鋼制品 第3部分：正火/正火軋制可焊接細晶結構鋼的交貨技術條件 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| prEN 10080-5-1999 | 鋼筋混凝土用鋼材 可焊鋼筋 第5部分：焊接鋼筋網交貨技術條件 | Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 5: Technical delivery conditions for welded fabric |
| prEN 1011-7-2002 | 焊接 金屬材料焊接的推薦規范 第7部分：電子束焊接 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| prEN 1011-8-2002 | 焊接 金屬材料焊接的推薦規范 第8部分：鑄鐵焊接 | Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons |
| prEN 10217-7-1998 | 壓力用途的焊接鋼管 交貨技術條件 第7部分：不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| prEN 10255-2002 | 適用于焊接和加工螺紋的非合金鋼管 交貨技術條件 | Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions |
| prEN 10296-2-2001 | 機械和一般工程用途的焊接鋼管 交貨技術條件 第2部分：不銹鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes |
| prEN 10305-6-1999 | 高精密度用途的鋼管 交貨技術條件 第6部分：液壓和氣動系統用冷拔焊接鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| prEN 1157-1993 | 焊接 工作位置 傾斜角和旋轉角定義 | Welds; working positions; definitions of angles of slope and rotation |
| prEN 13100-2-2002 | 熱塑性塑料半成品焊接接頭的無損檢驗 第2部分：X射線檢查法 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing |
| prEN 13100-3-2002 | 熱塑性塑料半成品焊接接頭的無損檢驗 第3部分：超聲檢測 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing |
| prEN 13479-2002 | 焊接耗材 耗材合格評定試驗方法和質量要求 第1部分：主要方法和評價 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| prEN 13705-1999 | 熱塑性塑料的焊接 熱氣流焊的機器和設備（包括擠壓焊） | Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) |
| prEN 14015-1-2000 | 在環境溫度和高于環境溫度 用于儲存液體 現場建造的 垂直圓柱形平底 地面焊接金屬罐的設計和制造規范 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, metallic tanks for the storage of liquids at ambient temperature and above - Part 1: Steel tanks |
| prEN 14208-2003 | 可運輸氣瓶 氣體運輸用容積達3000升的焊接氣罐規范 設計和結構 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| prEN 14295-2003 | 焊接消耗品 高強度鋼埋弧焊絲和管狀藥芯焊條與焊條、焊劑組件 分類 | Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
| prEN 14448-2002 | 大規模生產中熱塑性模塑料的熱工具焊接 | Heated tool welding of thermoplastics mouldings in mass production |
| prEN 2169-1981 | 航空航天系列 溶溶處理的耐熱鋼FE-PA91-HT 焊接環用棒材和型材 | Heat resisting steel FE-PA91-HT, solution treated; bars and sections for welded rings; aerospace series |
| prEN 2237-1981 | 航空航天系列 經溶液處理和淀積處理的耐熱鋼 FE-PA91-HT 焊接環用棒材和型材 | Heat resisting steel FE-PA91-HT, solution treated and precipitation treated; bars and sections for welded rings; aerospace series |
| prEN 288-10-1994 | 金屬材料焊接程序規范和鑒定 第10部分：電子束焊的焊接程序規范 | Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding |
| prEN 288-11-1994 | 金屬材料焊接程序規范和鑒定 第11部分：激光束焊的焊接程序規范 | Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding |
| prEN 288-12-1995 | 金屬材料焊接程序規范和鑒定 第12部分：鑄鋼弧焊的焊接程序試驗（ISO 9956-2:1995） | Specification and approval of welding procedures for metallic materials - Part 12: Welding procedure tests for the arc welding of cast steels (ISO 9956-2:1995) |
| prEN 288-13-1995 | 金屬材料焊接程序規范和鑒定 第13部分：鋁和鑄鍛材料化合物弧焊的焊接程序試驗 | Specification and approval of welding procedures for metallic materials - Part 13: Welding procedure tests for the arc welding of aluminium and combinations of cast to wrought material (ISO 9956-3:1995) |
| prEN 3155-012-2000 | 航空航天系列 用在連接部件的電接點 第012部分：三軸的8號、D型焊接R級插塞電接點 產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R; product standard |
| prEN 3155-013-2000 | 航空航天系列 用在連接部件的電接點 第013部分：三軸的8號、D型焊接R級塞孔電接點 產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R; product standard |
| prEN 3155-039-2001 | 航空航天系列 用在連接部件的電接點 第039部分：同軸塞孔16號D型焊接R級電接點 產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R; Product standard |
| prEN 3155-040-2001 | 航空航天系列 用在連接部件的電接點 第040部分：同軸12號插塞D型焊接R級電接點 產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R; Product standard |
| prEN 3155-041-2001 | 航空航天系列 用在連接部件的電接點 第041部分：同軸12號塞孔D型焊接R級電接點 產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R; Product standard |
| prEN 3155-058-2001 | 航空航天系列 用在連接部件的電接點 第058部分：同軸的16號插塞D型焊接R級電接點 產品標準/注：與EN 315 | Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001 |
| prEN 3155-059-2001 | 航空航天系列 用在連接部件的電接點 第059部分：同軸16號塞孔D型焊接R級電接點 產品標準/注：與EN 3155- | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001 |
| prEN 3155-060-2001 | 航空航天系列 用在連接部件的電接點 第060部分：同軸12號插塞D型焊接R級電接點 產品標準/注：與EN 3155- | Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001 |
| prEN 3155-061-2001 | 航空航天系列 用在連接部件的電接點 第061部分：同軸12號塞孔D型焊接R級電接點 產品標準/注：與EN 3155- | Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001 |
| prEN 3646-007-2001 | 航空航天系列 連續操作溫度175 ℃或 200℃、圓形卡口式聯結電連接器 第007部分：、密封的焊接或銅焊圓法 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175℃ or 200℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting; Product standard |
| prEN 3716-003-1998 | 航空航天系列 數字?jǐn)?shù)據傳輸用具有三線接口的單路連接器 第００３部分：焊接插座 產品標準 | Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard |
| prEN 3716-004-1998 | 航空航天系列 數字?jǐn)?shù)據傳輸用具有三線接口的單路連接器 第００４部分：焊接插頭 產品標準 | Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard |
| prEN 61193-5-1999 | 軟焊接 第5部分：印制電路板組件缺陷的登記和分析 | IEC 61193-5: Soft soldering - Part 5: Registration and analysis of defects on printed board assemblies |
| prEN 630-1992 | 鋁及其焊接合金中的電弧焊接頭 缺陷質量級別指南 | Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified) |
| prEN 756-2003 | 焊接消耗品 非合金和細精粒鋼埋弧焊用實心、空心焊條和電焊劑混合物 分類 | Welding consumables - Solid wire, tubular cored electrodes and electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification / Note: Intended as replacement for EN 756 (1995-10). |
| prEN ISO 11611-2003 | 焊接及相關工藝用防護服 | Protective clothing for use in welding and allied processes (ISO/DIS 11611:2003) |
| prEN ISO 14172-2003 | 焊接消耗材料 鎳及鎳合金手工金屬電弧焊用涂劑焊條 分類 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/FDIS 14172:2003) |
| prEN ISO 15012-1-2000 | 焊接和有關工藝中的健康和安全 空氣過濾設備的要求、試驗和標記 第1部分：焊接煙塵分離效率的試驗 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume (ISO/DIS 15012-1:2000) |
| prEN ISO 15012-2-2000 | 焊接和有關工藝中的健康和安全 空氣過濾設備的要求、試驗和標記 第2部分：焊接煙塵排放裝置的安裝部位的 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Testing of the capture zone of welding fume extraction devices (ISO/DIS 15012-2:2000) |
| prEN ISO 15607-2003 | 金屬焊接工藝的規范及驗收 一般規則 | Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003) |
| prEN ISO 15609-1-2000 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第1部分：電弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000) |
| prEN ISO 15609-3-2000 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第3部分：電子束焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000) |
| prEN ISO 15609-4-2000 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第4部分：激光束焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000) |
| prEN ISO 15609-5-2000 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第5部分：電阻焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000) |
| prEN ISO 15610-2003 | 金屬焊接工藝的規范和驗收 用經批準的焊接消耗材料驗收 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003) |
| prEN ISO 15611-2003 | 金屬焊接工藝的規范和驗收 用焊接經驗進行驗收 | Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003) |
| prEN ISO 15612-2000 | 金屬焊接工藝的規范和驗收 用標準焊接工藝進行驗收 | Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000) |
| prEN ISO 15613-2003 | 金屬焊接工藝的規范和驗收 用試生產試驗進行驗收 | Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003) |
| prEN ISO 15614-1-2003 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第1部分：鋼的電弧焊和氣焊及鎳和鎳合金的焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003) |
| prEN ISO 15614-10-2000 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第10部分：超基干焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000) |
| prEN ISO 15614-12-2000 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第12部分：點焊、縫焊及凸焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000) |
| prEN ISO 15614-2-2000 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第2部分：鋁及其合金的電弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
| prEN ISO 15614-5-2003 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第5部分：鈦、鋯及其合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003) |
| prEN ISO 15614-9-2000 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第9部分：水下超基濕焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000) |
| prEN ISO 17660-2002 | 鋼筋的焊接 | Welding of reinforcing steel (ISO/DIS 17660:2002) |
| prEN ISO 17662-2001 | 焊接 包括輔助加工在內的焊接設備的校正、鑒定及確認 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO/DIS 17662:2001) |
| prEN ISO 18273-2003 | 焊接消耗材料 鋁及鋁合金電弧焊用絲狀電極、焊絲和焊條 分類 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003) |
| prEN ISO 18274-2003 | 焊接消耗材料 鎳及鎳合金電弧焊用絲狀及帶狀電極、焊絲和焊條 分類 | Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2003) |
| prEN ISO 544-2003 | 焊接消耗品 焊接填縫金屬的交貨技術條件 產品型號、 尺寸、 公差和標記 | Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings (ISO/FDIS 544:2003) |
| prEN ISO 5817-2003 | 焊接 鋼、鎳、鈦與其合金熔化焊接接合 不理想性質量級別 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO/FDIS 5817:2003) |
| prEN ISO 9692-1-2003 | 焊接和相關工藝 接頭制備的推薦工藝 第1部分：鋼的人工電弧焊、氣體保護金屬電弧焊、氣焊和束焊 | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003) |
| 編號 | 中文名稱 | 英文名稱 |