| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A03-720-2-2002 | 混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 | (Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.) |
| NF A35-018-1984 | 鋼筋混凝土用鋼筋.焊接的適合性 | (Concrete reinforcing bars. Suitability for welding.) |
| NF A35-019-2-1996 | 鋼筋混凝土用鋼筋.可焊刻痕絲制鋼筋.第2部分:焊接鋼筋網 | (Concrete reinforcing steels. Reinforcing steels made of weldable indented wires. Part 2 : welded fabric.) |
| NF A35-021-1998 | 混凝土用鋼材.用于增強鋼制備的可焊接金屬線 | (STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.) |
| NF A35-052-1987 | 鋼鐵產品.帶改進粘附性的焊接鋼絲網和鋼絲用非合金鋼線材 | (Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
| NF A36-000-1979 | 結構鋼和鍋爐與壓力容器用鋼的焊接特性的推薦規范 | (RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.) |
| NF A36-205-5-2003 | 壓力容器用鋼制扁平產品.第5部分:熱機軋制的可焊接細粒鋼 | (Flat products made of steels for pressure purposes - Part 5 : weldable fine grain steels, thermomechanically rolled.) |
| NF A36-205-6-2003 | 壓力容器用鋼制扁平產品.第6部分:可焊接淬火和回火細粒鋼 | (Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.) |
| NF A36-211-1997 | 焊接氣體氣缸用薄鋼板和條帶 | (Steel sheet and strip for welded gas cylinders.) |
| NF A36-212-2002 | 固定近海結構的可焊接結構鋼.技術交貨條件 | (Weldable structural steels for fixed offshore structures - Technical delivery conditions.) |
| NF A36-226-2001 | 具有規定的高溫特性的壓力容器用熱軋可焊接鋼棒 | (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.) |
| NF A36-605-1982 | 鍋爐和壓力容器用焊接鋼沖壓鍛件.碳鋼和碳錳鋼.牌號與型號 | (Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
| NF A36-606-1982 | 鍋爐和壓力容器用焊接鋼沖壓鍛件.鉬、錳鉬和鉻鉬合金鋼.牌號和型號 | (Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.) |
| NF A36-620-4-1999 | 承壓用鋼鍛件.第4部分:高彈性強度的可焊接細粒鋼 | (STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).) |
| NF A36-620-4/A1-2002 | 承壓用鋼鍛件.第4部分:高彈性強度的可焊接細晶粒鋼 | (Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.) |
| NF A49-004-1984 | 鋼管.無縫管和圓截面焊接管及焊接配件.尺寸總圖及優選 | (Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.) |
| NF A49-005-2003 | 焊接和無縫鋼管.管的尺寸和單位長度重量的一覽表 | (Seamless and welded steel tubes - General tables of dimensions and masses per unit length.) |
| NF A49-141-1978 | 鋼管.一般商業用中壓平端焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-145-1978 | 鋼管.熱加工細螺紋焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-147-1980 | 鋼管.一般用和管道用光端縱向焊接鋼管.奧氏體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-148-1980 | 鋼管.一般用和管道用光端縱向焊接鋼管.鐵素體不銹鋼.（尺寸.交貨技術條件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-150-1985 | 鋼管.水管系統用涂覆或保護焊接管.尺寸.交貨技術條件 | (Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.) |
| NF A49-151-2003 | 包括飲用水在內的含水液體輸送用焊接不銹鋼管.交貨技術件 | (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-160-1979 | 鋼管.混凝土包的加熱板用的焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. WELDED TUBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-170-1-1999 | 對縫焊接管道配件.第1部分:一般使用和無特殊檢驗要求的鍛碳鋼 | (Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.) |
| NF A49-189-1980 | 鋼管.90度鍍鋅3d樣式的焊接曲線.（尺寸.交貨技術條件.） | (STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-191-1975 | 鋼管.毛細管焊接或焊接釬接用鋼或鑄鐵接頭.（尺寸.交貨技術條件.） | (STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-192-1981 | 鋼管.壓力容器用內螺紋非合金鋼焊接套管 | (STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.) |
| NF A49-201-1-2002 | 焊接壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
| NF A49-201-2-2002 | 焊接壓力鋼管.交貨技術條件.第2部分:規定高溫特性的電焊合金和非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-3-2002 | 焊接壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
| NF A49-201-4-2002 | 焊接壓力鋼管.交貨技術條件.第4部分:規定低溫特性的電焊非合鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.) |
| NF A49-201-5-2002 | 焊接壓力鋼管.交貨技術條件.第5部分:規定高溫特性的埋弧焊接非合金和合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-6-2002 | 焊接壓力鋼管.交貨技術條件.第6部分:規定低溫特性的埋弧焊接非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.) |
| NF A49-244-1993 | 鋼管.壓力設備用焊接奧氏體不銹鋼和奧氏鐵素體軋制鋼管的尺寸和技術交貨條件 | (STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.) |
| NF A49-247-1981 | 鋼管.熱交換器用縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-249-1980 | 鋼管.食品工業用光端縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件 | (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-285-1982 | 鋼管.有質量要求的非合金或合金鋼制對縫焊接橢圓底座.尺寸.交貨技術條件 | (Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-289-1990 | 鋼管.用于高低溫條件下的對縫焊接管狀配件.非合金、合金和不銹鋼.尺寸.技術交貨條件 | (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-296-1983 | 鋼管.帶質量要求的熔焊非合金或合金鋼制等徑或縮徑焊接三通管.尺寸.交貨技術條件 | (Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-300-2-2003 | 精密裝置用鋼管.交貨技術條件.第2部分:焊接冷拉管 | (Steel tubes for precision applications - Technical delivery conditions - Part 2 : welded cold drawn tubes.) |
| NF A49-300-3-2003 | 精密裝置用鋼管.技術交貨條件.第3部分:焊接冷分級管 | (Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.) |
| NF A49-300-5-2003 | 精密用途鋼管.技術交貨條件.第5部分:焊接冷精加工方形和矩形鋼管 | (Steel tubes for precision applications - Technical delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.) |
| NF A49-341-1975 | 鋼管.機械用精密焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-343-1980 | 鋼管.機械用D小于或等于168.3mm的縱向焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. LONGITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-540-1-1997 | 非合金細晶粒結構鋼的冷成形焊接結構空心型材.第1部分:交貨技術要求 | (Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.) |
| NF A49-647-1979 | 鋼管.不銹鋼、鐵素體和奧氏體鋼制圓形、正方形、矩形或橢圓形建筑用焊接鋼管.（尺寸.交貨技術條件.） | (STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.) |
| NF A49-716-1998 | 鋼管.焊接接頭鍍膜配件和管的外結構. | (STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.) |
| NF A49-875-1-1996 | 鋼管的無損檢測.第1部分:證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 | (Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.) |
| NF A49-875-11-2000 | 鋼管的無損檢驗.第11部分:檢測表面缺陷用無縫和焊接鋼管的液體滲透試驗 | (Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.) |
| NF A49-875-12-2000 | 鋼管的無損檢驗.第12部分:檢測表面缺陷用無縫和焊接錳鋼管的磁粉檢測 | (Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
| NF A49-875-13-2000 | 鋼管的無損檢驗.第13部分:無縫和焊接(埋弧焊)鋼管的自動全周邊超聲厚度檢測 | (Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.) |
| NF A49-875-14-2000 | 鋼管的無損檢驗.第14部分:層面缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動超聲試驗 | (Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.) |
| NF A49-875-15-2000 | 鋼管的無損檢驗.第15部分:層面缺陷探測用焊接鋼管的生產用焊接帶材/板材自動超聲試驗 | (Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-16-2000 | 鋼管的無損檢驗.第16部分:層面缺陷探測用焊接鋼管的焊縫鄰近區域的自動超聲試驗 | (Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-17-2000 | 鋼管的無損檢驗.第17部分:層面缺陷探測用無縫和焊接鋼管末端超聲試驗 | (Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-18-2000 | 鋼管的無損檢驗.第18部分:層面缺陷探測用無縫和焊接錳鋼管末端磁粉檢驗 | (Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
| NF A49-875-2-2000 | 鋼管的無損檢驗.第2部分:檢驗液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管(埋弧焊除外)的自動渦流試驗 | (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of) |
| NF A49-875-3-2000 | 鋼管的無損檢驗.第3部分:檢測缺陷用無縫和焊接鋼管(埋弧焊除外)的自動渦流試驗 | (Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.) |
| NF A49-875-5-2000 | 鋼管的無損檢驗.第5部分:檢測縱向缺陷用無縫和焊接(除埋弧焊)錳鋼管的自動全周邊電磁變換器/磁漏試驗 | (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for) |
| NF A49-875-7-1996 | 鋼管的無損試驗.第7部分:縱向缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動全周邊超聲波試驗 | (Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.) |
| NF A50-425-1998 | 輕金屬及其合金.危險產品傳輸箱構造可焊接產品 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.) |
| NF A50-650-4-1997 | 鋁和鋁合金.擠壓棒材.焊接設備的特殊要求 | (Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.) |
| NF A50-802-1988 | 鋁和鋁合金.大直徑焊接管.尺寸和公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.) |
| NF A51-307-2003 | 銅和銅合金.焊接和釬焊用棒材和線材 | (Copper and copper alloys - Rod and wire for welding and braze welding.) |
| NF A80-002-2003 | 焊接.焊接和相關工藝的多語種術語列表 | (Welding - Multilingual list of terms for welding and related processes.) |
| NF A80-010-1997 | 焊接.工作位置.坡度角和旋轉角的定義 | (Welds. Working positions. Definitions of angles of slope and rotation.) |
| NF A80-021-2000 | 焊接及有關工藝.工藝和參考值的命名 | (Welding and allied processes - Nomenclature of processes and reference numbers.) |
| NF A80-022-1999 | 焊接.帶說明的多語種接頭術語 | (WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).) |
| NF A80-230-1-1998 | 焊接和合金過程.金屬材料幾何缺陷的分類.第1部分:熔焊(歐洲標準6520-1) | (Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.) |
| NF A80-230-2-2003 | 焊接和相關工藝.金屬材料中幾何缺陷的分類.第2部分:帶壓焊接 | (Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2 : welding with pressure.) |
| NF A81-053-1989 | 焊接.釬焊.硬釬焊.焊條.驗收試驗規程 | (WELDING. BRASING. SOLDERING. BRAZE-WELDING. FILLER MATERIALS. ACCEPTANCE TESTING PROCEDURES.) |
| NF A81-056-2000 | 焊條.焊接及有關工藝用焊條的生產、供應和分配的質量要求 | (Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes.) |
| NF A81-303-2003 | 手工電弧焊用涂敷焊條.焊接金屬沉積方法.硬度試驗 | (Covered electrodes for manual metal arc welding - Procedure for the deposition of weld metal - Hardness tests.) |
| NF A81-304-2002 | 焊接消耗品.化學分析用的焊接金屬墊片的沉積 | (Welding consumables - Deposition of a weld metal pad for chemical analysis.) |
| NF A81-305-2001 | 焊接和有關工藝.鐵素體鋼電弧焊金屬中氫含量的測定 | (Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.) |
| NF A81-309-1995 | 焊接可熔化性.非合金和低合金鋼的手工金屬弧焊接用藥皮焊條 | (Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-320-2001 | 焊接消耗品.通過測量可擴散氫測定手工電弧焊電極的抗?jié)裥? | (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen.) |
| NF A81-325-1997 | 焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A81-331-1984 | 焊接、硬釬焊和硬焊鋁及鋁合金用填充金屬材料.符號.規范 | (Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.) |
| NF A81-340-1997 | 焊條.高強度鋼的手工電弧焊接用金屬藥皮焊條.分類(歐洲標準EN 757) | (Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification.) |
| NF A81-350-1997 | 焊條.非合金鋼及細粒鋼的有和無氣體保護的金屬電弧焊接用管狀焊絲.分類(歐洲標準EN 758) | (Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.) |
| NF A81-361-1999 | 焊接.填充材料(歐洲標準EN 1044) | (Brazing. Filler metals.) |
| NF A81-362-2002 | 焊接.軟釬焊.釬焊.硬釬焊.軟釬焊、釬焊及硬釬焊用焊料.分類、編碼和驗收試驗 | (Welding, soldering, brasing, braze-welding - Filler metals for soldering, brazing and braze-welding - Classification, coding, acceptance testing.) |
| NF A81-369-1995 | 軟釬焊、硬釬焊接和銅焊用填充金屬.命名(歐洲標準EN ISO 3677) | (FILLER METAL FOR SOFT SOLDERING, BRAZING AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD EN ISO 3677).) |
| NF A81-410-1984 | 鋁和鋁合金.焊接、硬釬焊和釬焊.基礎產品和焊條的選擇 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.) |
| NF A81-900-1973 | 鋁和鋁合金.焊接.焊劑的使用和檢查 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.) |
| NF A82-001-1990 | 電阻焊接設備.電阻焊和類似技術用電焊機電氣設備的安全規程 | (Safety requirements for the construction and the installation of equipment for resistance welding and allied processes.) |
| NF A82-020-1985 | 電阻焊接.電阻焊機.規范和試驗 | (Electric resistance welding. Machines for electric resistance welding. Specifications and tests.) |
| NF A82-025-1986 | 電阻焊接.整流電流的電阻焊機.規范和試驗 | (ELECTRIC RESISTANCE WELDING. MACHINES FOR ELECTRIC RESISTANCE WELDING WITH RECTIFIED CURRENT. SPECIFICATIONS AND TESTS.) |
| NF A82-030-1992 | 電阻焊接設備的圖形符號 | (Graphical symbols for resistance welding equipment.) |
| NF A82-040-1985 | 電阻焊接.電阻焊機用變壓器.適用于所有變壓器的通用規范 | (Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.) |
| NF A82-041-1987 | 電阻焊接.汽車工業中多點焊接用的帶分離式二次線組的變壓器.特殊規范 | (Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.) |
| NF A82-043-1996 | 電阻焊接.焊接槍用集成變壓器 | (Electric resistance welding. Integrated transformers for welding guns.) |
| NF A82-045-1986 | 電阻焊接.電阻焊機用多組整流器.規范和試驗 | (ELECTRIC RESISTANCE WELDING. RECTIFIER EQUIPMENT FOR RESISTANCE WELDING MACHINES. SPECIFICATIONS AND TESTS.) |
| NF A82-100-1987 | 電阻焊接.電阻焊接用電極材料及輔助設備 | (Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.) |
| NF A82-104-1-2000 | 電阻焊接設備.電極接頭,外錐度1:10.第1部分:圓錐形接頭,錐度1:10 | (Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.) |
| NF A82-105-1985 | 電阻焊接.帶電極帽、內錐度配合和凸頭電極帽的直電阻點焊電極.尺寸和公差(錐度1/10) | (Electric resistance welding. Straight resistance spot welding electrodes with caps, male taper fits and male caps. Sizes and tolerances (taper 1/10).) |
| NF A82-108-1992 | 焊接滾輪坯料的尺寸 | (Dimensions of seam welding wheel blanks.) |
| NF A82-110-2001 | 電阻焊接設備.與水冷部分連接的二級連接電纜.尺寸和特性 | (Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.) |
| NF A82-112-2-2002 | 電阻焊接水冷次級線圈連接電纜.第2部分:單根導線連接電纜的尺寸及要求 | (Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.) |
| NF A82-112-3-1996 | 電阻焊接水冷次級線圈連接電纜.第3部分:試驗要求 | (WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING. PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD EN ISO 8205-3).) |
| NF A82-150-1987 | 電阻焊接多點焊接機用無外殼千斤頂.一般規范 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. General specifications.) |
| NF A82-160-1987 | 電阻焊接.多點焊接機用無外殼千斤頂.尺寸 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. Sizes.) |
| NF A82-199-1992 | 電阻焊接設備絕緣帽和套管 | (Insulation caps and bushes for resistance welding equipment.) |
| NF A82-740-1992 | 加厚焊接機臺的槽 | (Slots in platens for projection welding machines.) |
| NF A83-011-1995 | 氣焊設備.氧/燃料(切割機型)圓柱筒焊接.結構型式,一般規范,試驗方法 | (Gas welding equipment. Oxygen/fuel blowpipes (cutting machine type) of cylindrical barrel. Type of construction, general specifications, test methods.) |
| NF A84-410-2003 | 氣焊設備.焊接、切割和相關工藝中使用的壓力計 | (Gas welding equipment - Pressure gauges used in welding, cutting and allied processes.) |
| NF A84-431-1999 | 氣焊設備.焊接、切割和類似工藝用300巴以下的氣瓶調壓器 | (Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar.) |
| NF A84-432-2003 | 氣焊設備.焊接、切割和相關工藝的氣瓶上用整體流量計式調節器.分類、規范和試驗 | (Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests.) |
| NF A84-433-2001 | 氣焊設備.小于等于300bar的焊接、切削及相關工藝用多頭管系用壓力調節器 | (Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar.) |
| NF A84-443-1999 | 氣焊設備.焊接、切割和相關工藝的乙炔多功能系統.一般要求 | (GAS WELDING EQUIPMENT. ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES. GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14114).) |
| NF A84-444-2003 | 氣焊設備.焊接、切割和相關工藝用乙炔復式接頭系統.高壓裝置的安全要求 | (Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices.) |
| NF A84-530-1996 | 焊接、切割和加熱用手動吹管.規范和試驗 | (Manual blowpipes for welding, cutting and heating. Specifications and tests.) |
| NF A84-621-2002 | 氣焊設備.焊接、切割和相關工藝用帶截止閥的速動連接 | (Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.) |
| NF A84-622-1994 | 氣焊設備.焊接設備,切割和連接技術用軟管連接 | (Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes.) |
| NF A84-623-1996 | 氣熔焊設備.焊接,切割和有關工藝管組件規范 | (Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes.) |
| NF A85-004-1988 | 電阻焊接及有關技術用的設備上用的圖形符號與指示燈 | (EQUIPMENTS FOR ARC WELDING AND ALLIED PROCESSES. GRAPHICAL SYMBOLS TO BE USED ON EQUIPMENTS.) |
| NF A85-009-1-2000 | 電弧焊設備.第1部分:焊接電源 | (Arc welding equipment - Part 1 : welding power sources.) |
| NF A85-009-1/A1-2001 | 電弧焊設備.第1部分:焊接電源 | (Arc welding equipment - Part 1 : welding power sources.) |
| NF A85-600-1978 | 使用藥皮焊條手工焊接用焊鉗.安全規則.規范.類型試驗 | (ELECTRODE HOLDER FOR MANUAL ARC WELDING WITH COATED ELECTRODES SAF-ETY RULES,SPECIFICATIONS AND TESTS.) |
| NF A85-610-1984 | 電弧焊接電纜的連接裝置.安全規則.規范.類型試驗 | (CONNECTORS FOR ARC WELDING CABLES. SAFETY RULES. REQUIREMENTS. TYPE TESTS. MARKING.) |
| NF A85-620-1986 | 電弧焊接.干燥箱和藥皮焊條的儲藏.規范和試驗 | (ELECTRIC ARC WELDING. OVENS FOR THE DRYING AND STORAGE COVERED ELECTRODES. SPECIFICATIONS AND TESTS.) |
| NF A87-010-1973 | 鋁和鋁合金.焊接.邊的準備 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.) |
| NF A87-012-2-2000 | 焊接.鋼的基本焊接接合詳圖.第2部分:非內部壓力器件 | (Welding - Basic weld joint details in steel - Part 2 : non internal pressurized components.) |
| NF A87-013-2-1999 | 焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊 | (WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).) |
| NF A87-013-3-2001 | 焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A87-021-1998 | 焊接.弧雙端螺栓焊接的雙端螺栓和陶瓷箍.(歐洲標準EN ISO 13918) | (Welding. Studs and ceramic ferrules for arc stud welding.) |
| NF A88-112-1998 | 焊接操作人員.焊接操作人員用金屬材料全機械化和自動焊接用熔焊和阻焊裝置驗收試驗 | (Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.) |
| NF A88-121-1994 | 焊接條件.任務和責任 | (WELDING COORDINATION. TASKS AND RESPONSIBILITIES. (EUROPEAN STANDARD EN 719).) |
| NF A88-200-1-2002 | 焊接和相關過程中的健康和安全.電弧焊接產生的煙塵和氣體取樣的實驗室方法.第1部分:排放率測定和顆粒煙塵的 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic) |
| NF A88-200-2-2003 | 焊接和相關工藝中的衛生和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第2部分:除臭氧外氣體的排放率測 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.) |
| NF A88-200-3-2003 | 焊接和相關工藝中的衛生和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第3部分:用固定點測量法測定臭氧 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement) |
| NF A88-202-1-2001 | 焊接和有關工藝中的健康和安全.工作人員呼吸區空氣粒子和氣體的取樣.第1部分:氣體粒子的取樣 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.) |
| NF A88-202-2-2000 | 焊接和有關工藝中的健康和安全.工作人員工作區空氣粒子和氣體的取樣.第2部分:氣體取樣 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases.) |
| NF A88-230-1997 | 焊接和聯接工藝過程中的健康和安全.弧焊工藝用透明焊接隔層,板條和屏蔽 | (Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-230/A1-2002 | 焊接及相關工藝的衛生和安全.弧焊用透明焊接防護罩、安全帶和屏蔽物 | (Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-800-2003 | 塑料焊接人員.焊工資格檢驗.熱塑焊接組件 | (Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.) |
| NF A88-950-1-2002 | 水下焊接焊工資格檢驗。第１部分：高壓濕焊的潛水焊工 | (Qualification testing of welders for under-water welding - Part 1 : diver-welders for hyperbaric wet welding.) |
| NF A88-950-2-2002 | 水下焊接焊工資格檢驗。第2部分：高壓干焊的潛水焊工和焊接操作者 | (Qualification testing of welders for under-waster welding - Part 2 : diver-welders and welding operators for hyperbaric dry welding.) |
| NF A89-010-1-1992 | 金屬材料焊接工藝與驗收規范.第1部分:熔焊一般規則(歐洲標準EN 288-1) | (Specification and approval of welding procedures for metallic materials. Part 1 : general rules for fusion welding.) |
| NF A89-010-10-1996 | 金屬材料焊接工藝的驗收和規范.第10部分:電子束焊接工藝規范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-10).) |
| NF A89-010-11-1996 | 金屬材料焊接工藝的驗收和規范.第11部分:激光束焊接工藝規范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).) |
| NF A89-010-2-1992 | 金屬材料焊接工藝與驗收規范.第2部分:電弧焊焊接程序規范(歐洲標準EN 288-2) | (Specification and approval of welding procedures for metallic materials. Part 2 : welding procedure specification for arc welding.) |
| NF A89-010-3-1992 | 金屬材料焊接工藝的驗收和規范.第3部分:鋼件電弧焊焊接工藝試驗(歐洲標準EN 288-3) | (Specification and approval of welding procedures for metallic materials. Part 3 : welding procedure tests for the arc welding of steels.) |
| NF A89-010-5-1994 | 金屬材料焊接程序的規范和認可.第5部分:使用批準的電弧焊焊條進行認可 | (Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.) |
| NF A89-010-6-1994 | 金屬材料焊接程序的規范和認可.第6部分:有關以前試驗的認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN 288-6).) |
| NF A89-010-7-1995 | 金屬材料焊接程序的規范和認可.第七部分:使用電弧焊標準接程序進行認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).) |
| NF A89-010-8-1995 | 金屬材料焊接程序的規范和認可.第八部分:利用預生產焊接試驗進行認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD EN 288-8).) |
| NF A89-011-1986 | 煤氣或蒸氣用鋼壓力器.焊接操作方式的鑒定.固定在橫木頂桿或拉桿.豎桿壁上的連接情況 | (STEEL VESSELS SUBJECT TO GAS OR STEAM PRESSURE. QUALIFICATION OF A WELDING PROCEDURE. APPLICATION TO THE WELDING OF TIE BARS,BRACES AND BOLTS ON TO A WALL.) |
| NF A89-052-2-2001 | 金屬材料焊接程序的規范和合格評定.焊接程序規范.第2部分:氣焊 | (Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.) |
| NF A89-057-11-2002 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.第11部分:電子和激光射線焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.) |
| NF A89-057-8-2002 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.第8部分:管對管-板接頭的焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-101-1-1998 | 焊接.金屬材料焊接推薦.第1部分:電弧焊接的一般指南 | (WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC WELDING. (EUROPEAN STANDARD EN 1011-1).) |
| NF A89-101-1/A1-2002 | 焊接.金屬材料焊接的推薦規范.第1部分:電弧焊接通用指南 | (Welding - Recommendations for welding of metallic materials - Part 1 : general guidance for arc welding.) |
| NF A89-101-2-2002 | 焊接.金屬材料焊接的推薦規范.第2部分:鐵素體鋼的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.) |
| NF A89-101-3-2000 | 焊接.金屬材料焊接的推薦方法.第3部分:不銹鋼的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.) |
| NF A89-101-4-2000 | 焊接.金屬材料焊接的推薦方法.第4部分:鋁和鋁合金的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF A89-101-5-2003 | 焊接.金屬材料焊接的推薦方法.第5部分:包層鋼焊接 | (Welding - Recommendations for welding of metallic materials - Part 5 : welding of clad steel.) |
| NF A89-204-2-1996 | 金屬材料焊接的破壞試驗.硬度試驗.第2部分:焊接接縫的微硬度試驗(歐洲標準EN 1043-2) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS TESTING ON WELDED JOINTS. (EUROPEAN STANDARD EN 1043-2).) |
| NF A89-206-1987 | 電阻焊.點焊與凸焊.焊接點用扭轉剪切試件 | (Welding and allied techniques. Resistance spot, projection and seam welded lap joints. Tension shear tests.) |
| NF A89-207-2000 | 焊接.在奧氏體和雙重鐵素體奧氏體鉻鎳不銹鋼焊接金屬中鐵素體數目的測定 | (Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.) |
| NF A89-208-1987 | 焊接和有關技術.點焊,凸焊或縫焊搭接接頭 | (WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.) |
| NF A89-210-1996 | 金屬材料焊接的破壞試驗.斷裂試驗.(歐洲標準EN 1320) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).) |
| NF A89-211-1996 | 金屬材料焊接的破壞試驗.焊接的低倍及顯微檢驗(歐洲標準EN 1321) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).) |
| NF A89-220-1973 | 鋁和鋁合金.焊接.分類和焊接點的檢驗 | (ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.) |
| NF A89-231-1992 | 鋼的弧焊接頭.質量缺陷等級導則 | (ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).) |
| NF A89-232-1994 | 鋁和可焊合金的弧焊接頭.質量缺陷等級導則 | (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-233-1996 | 焊接.電子束和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋼 | (WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).) |
| NF A89-234-2001 | 焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 | (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-240-1987 | 焊接和有關技術.電阻點焊、凸焊或縫焊搭接接頭.帶解釋的缺陷分類 | (WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.) |
| NF A89-250-1-1994 | 焊接的質量要求.金屬材料的熔焊.第1部分:選擇和使用導則 | (Quality requirements for welding. Fusion welding of metallic materials. Part 1 : guidelines for selection and use.) |
| NF A89-250-2-1994 | 焊接的質量要求.金屬材料的熔焊.第2部分:全面質量系統 | (Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.) |
| NF A89-250-3-1994 | 焊接的質量要求.金屬材料的熔焊.第3部分:標準質量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.) |
| NF A89-250-4-1994 | 焊接的質量要求.金屬材料的熔焊.第4部分:基本質量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.) |
| NF A89-253-1996 | 焊接.預熱溫度、層間溫度和預加熱的維持溫度測量導則 | (Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.) |
| NF A89-300-1996 | 焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 | (WELDING. GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS. DIMENSIONS FOR LENGTHS AND ANGLES. SHAPE AND POSITION. (EUROPEAN STANDARD EN ISO 13920).) |
| NF A89-310-1973 | 鋁和鋁合金.焊接.基本元件的連接.選擇原則 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES OF ASSEHBLY. SELECTION CRITERIA.) |
| NF A89-420-2000 | 釬焊.釬焊接點的無損試驗 | (Brazing - Destructive tests of brazed joints.) |
| NF A89-430-2000 | 釬焊.釬焊接頭的無損檢驗 | (Brazing - Non-destructive examination of brazed joints.) |
| NF A89-500/A1-2003 | 焊接無損檢驗.金屬材料的一般規則 | (Non-destructive examination of welds - General rules for metallic materials.) |
| NF A89-510-1997 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗 | (Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-510/A1-2003 | 焊接無損檢驗.焊接接頭射線照相檢驗 | (Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF A89-511-1998 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收等級 | (Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A89-511/A1-2003 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收水平 | (Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.) |
| NF A89-520-1997 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗 | (Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF A89-520/A1-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗 | (Non-destructive testing of welds - Ultrasonic testing of welded joints.) |
| NF A89-521-1997 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級 | (Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF A89-521/A1-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級 | (Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.) |
| NF A89-565-1987 | 焊接和相關工藝.電阻點焊和縫焊接縫的放射線檢查.推薦實施規范 | (Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.) |
| NF A89-567-2001 | 電阻點焊、滾焊和浮凸焊接機械剝離試驗的程序和樣品尺寸 | (Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds.) |
| NF A89-569-2001 | 電阻點焊和浮凸焊接十字形拉力試驗的程序和樣品尺寸 | (Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.) |
| NF A89-574-2003 | 金屬材料焊接的無損檢驗.電阻焊接.電阻縫焊的壓力試驗 | (Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.) |
| NF A89-575-2003 | 金屬材料焊接的無損檢驗.測量δ鐵素體用的取樣方法 | (Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.) |
| NF A89-600-1998 | 焊接.金屬材料的弧雙端螺栓焊接(歐洲標準EN ISO 14555) | (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF A89-601-2001 | 焊接.金屬材料的摩擦焊接 | (Welding - Friction welding of metallic materials.) |
| NF A89-700-1-2000 | 焊接.電子束焊接機的認可檢驗.第1部分:原則和認可條件 | (Welding - Acceptance inspection of electron beam welding machines - Part 1 : principles and acceptance conditions.) |
| NF A89-700-2-2000 | 焊接.電子束焊接機的認可檢驗.第2部分:加速電壓特性的測量 | (Welding - Acceptance inspection of electron beam welding machines - Part 2 : measurement of accelerating voltage characteristics.) |
| NF A89-700-3-2000 | 焊接.電子束焊接機的認可檢驗.第3部分:電子束電流特性的測量 | (Welding - Acceptance inspection of electron beam welding machines - Part 3 : measurement of beam current characteristics.) |
| NF A89-700-4-2000 | 焊接.電子束焊接機的認可檢驗.第4部分:焊接速度的測量 | (Welding - Acceptance inspection of electron beam welding machines - Part 4 : measurement of welding speed.) |
| NF A89-700-5-2000 | 焊接.電子束焊接機的認可檢驗.第5部分:電子束放出精確度的測量 | (Welding - Acceptance inspection of electron beam welding machines - Part 5 : measurement of run-out accuracy.) |
| NF A89-700-6-2000 | 焊接.電子束焊接機的認可檢驗.第6部分:焊點位穩定性的測量 | (Welding - Acceptance inspection of electron beam welding machines - Part 6 : measurement of stabilitry of spot position.) |
| NF A89-701-1-2003 | CO2激光切割、焊接機的驗收試驗.第1部分:通用原理和驗收條件 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 1 : general principles, acceptance conditions.) |
| NF A89-701-2-2003 | CO2激光切割、焊接機的驗收試驗.第2部分:靜態和動態準確度的測定 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 2 : measurement of static and dynamic accuracy.) |
| NF A89-701-3-2003 | CO2激光切割、焊接機的驗收試驗.第3部分:氣體流量和壓力測量儀的校準 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.) |
| NF A89-750-1-2003 | 焊接.與焊接和相關工藝有關的底漆的試驗.第1部分:一般要求 | (Welding - Test for shop primers in relation to welding and allied processes - Part 1 : general requirements.) |
| NF A89-750-2-2003 | 焊接.與焊接和相關工藝有關的底漆的試驗.第2部分:底漆的焊接特性 | (Welding - Test for shop primers in relation to welding and allied processes - Part 2 : welding properties of shop primers.) |
| NF A89-750-3-2003 | 焊接.與焊接和相關工藝有關的底漆的試驗.第3部分:熱切割 | (Welding - Test for shop primers in relation to welding and allied processes - Part 3 : thermal cutting.) |
| NF A89-750-4-2003 | 焊接.與焊接和相關工藝有關的底漆的試驗.第4部分:煙氣排放 | (Welding - Test for shop primers in relation to welding and allied processes - Part 4 : emission of fumes and gases.) |
| NF A89-810-1-1999 | 熱塑性半成品的焊接接頭試驗.第1部分:彎曲試驗. | (Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF A89-810-3-2000 | 熱塑性半成品的焊接接頭試驗.第3部分:拉伸蠕變試驗. | (Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF A89-810-4-2002 | 熱塑性半成品的焊接接頭試驗.第4部分:剝離試驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.) |
| NF A89-810-5-2000 | 熱塑半成品焊接接頭的試驗.第5部分:宏觀檢驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.) |
| NF A89-810-7-2003 | 熱塑性半成品焊接接頭的試驗.第7部分:腰形試驗樣品的抗拉試驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.) |
| NF A89-810-8-2002 | 熱塑性半成品的焊接接頭試驗.第8部分:要求 | (Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.) |
| NF A92-118-1993 | 搪瓷.搪瓷器皿耐碰撞測定.焊接工具試驗 | (VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF THE RESISTANCE OF ENAMELLED ARTICLES TO IMPACT. PISTOL TEST.) |
| NF C20-758-1990 | 環境試驗.試驗方法.TD試驗可釬焊性敷鍍金屬抗溶性和表面元件抗焊接熱強度測定 | (Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).) |
| NF C31-652-2001 | 特種繞組線規范.第2部分:帶粘合層的可焊接的聚氨基甲酸乙酯漆包圓銅繞組線,130級 | (Specifications for particular types of winding wires - Part 2 : solderable polyurethane enamelled round copper wire, class 130, with a bonding layer.) |
| NF C31-654-2001 | 特種繞組線規范.第4部分:可焊接的聚氨基甲酸乙酯漆包圓銅繞組線130級 | (Specifications for particular types of winding wires - Part 4 : solderable polyurethane enamelled round copper wire, class 130.) |
| NF C31-669-2001 | 特種繞組線規范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅繞組線,130級 | (Specifications for particular types of winding wires - Part 19 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130.) |
| NF C31-671-2001 | 特種繞組線規范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅繞組線,155級 | (Specifications for particular types of winding wires - Part 21 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155.) |
| NF C31-673-1995 | 特種繞組線規范.第23部分:可焊接的聚酰胺酯漆包圓銅繞組線,180級 | (Specifications for particular types of winding wires. Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-673/A1-2002 | 特種繞組線規范.第23部分:180類可焊接聚氨亞胺漆包圓銅線 | (Specifications for particular types of winding wires - Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-685-2001 | 特種繞組線規范.第35部分:155級帶粘結層的可焊接聚氨酯漆包圓銅線 | (Specifications for particular types of winding wires - Part 35 : solderable polyurethane enamelled round copper wire, class 155, with a bonding layer.) |
| NF C31-686-2001 | 特種繞組線規范.第36部分:有粘結層的可焊接聚酰胺酯漆包圓銅繞組線.180級 | (Specifications for particular types of winding wires - Part 36 : solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer.) |
| NF C31-701-2002 | 特種繞組線規范.第51部分:可焊接聚亞胺酯漆包圓銅線 | (Specifications for particular types of winding wires - Part 51 : solderable polyurethane enamelled round copper wire, class 180.) |
| NF C46-512-1999 | 工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥(歐洲標準EN 60534-3-3) | (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.) |
| NF C64-452-1992 | 充氣高壓開關和控制設備用鍛鋁和鑄鋁合金焊接復合外殼 | (Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear.) |
| NF C64-4521-1993 | 充氣高壓開關和控制設備用鍛鋁和鑄鋁合金焊接復合外殼.補充件1 | () |
| NF C90-700-1-3-2002 | 電子組件用連接材料.第1-3部分:電子焊接用電子級釬焊合金及有焊劑和無焊劑的固體焊料的要求 | (Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.) |
| NF C90-703-1999 | 印刷電路板組件.第1部分:總規范.使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 | (Printed board assemblies - Part 1 : generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies.) |
| NF C90-704-2000 | 印刷電路板組件.第2部分:分規范.表面安裝焊接組件的要求 | (Printed board assemblies - Part 2 : sectional specification - Requirements for surface mount soldered assemblies.) |
| NF C90-705-2000 | 印刷電路板組件.第3部分:分規范.通孔安裝焊接組件的要求 | (Printed board assemblies - Part 3 : sectional specification - Requirements for through-hole mount soldered assemblies.) |
| NF C90-706-1999 | 印刷電路板組件.第4部分:分規范.端點焊接組件的要求 | (Printed board assemblies - Part 4 : sectional specification - Requirements for terminal soldered assemblies.) |
| NF C91-199-1997 | 電磁兼容性(EMC).第199部分:電弧焊接設備用產品標準 | (Electromagnetic compatibility (EMC). Product standard of arc welding equipment.) |
| NF C93-023-1998 | 無縫焊接.第2部分:無縫焊接卷邊連接.一般要求.試驗方法和特殊指南 | (SOLDERLESS CONNECTIONS. PART 2 : SOLDERLESS CRIMPED CONNECTIONS. GENERAL REQUIREMENTS, TEST METHODS AND PRATICAL GUIDANCE. (EUROPEAN STANDARD EN 60 352-2).) |
| NF C93-400-12-6-1997 | 電子設備用機電元件.基本試驗過程和測量方法.第12部分:焊接試驗.第6節:試驗12f:防熔密封和機械焊接中的清洗 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 12 : soldering tests. Section 6 : test 12f : sealing against flux and cleaning solvents in machine soldering.) |
| NF C93-406-4-107-2002 | 電子設備用連接器.第4-107部分:經質量評定的印制板連接器.固定部分有印制板用焊接和壓入端子、活動部分有不 | () |
| NF C93-472-6-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第12部分:焊接試驗.第6節:試驗12F:機械焊接過程中對液體和清潔 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12 : SOLDERING TESTS. SECTION 6 : TEST 12F : SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING. (EUROPEAN STANDARD EN 60 512-12-6).) |
| NF C93-474-20-1997 | 電子設備用機電元件.基本試驗規程和測量方法.第16部分:觸點和終端機械試驗.第20節:第15次試驗:機械強度(無 | () |
| NF E25-140-1994 | 緊固件.電弧焊接雙端螺栓.符號SA.尺寸和物理化學特性.拉制電弧焊接螺栓系統 | (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-418-1991 | 電阻焊接用六角形螺母.符號HSR緊固件 | (FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.) |
| NF E26-010-1981 | 提升設備用焊接短環鏈和特短環鏈校準負載鏈條 | (Welded short-link and very short-link calibrated loading chains used for lifting appliances.) |
| NF E26-011-1981 | 焊接短鏈校準或未校準負載鏈條 | (Welded short-link calibrated or non-calibrated loading chains.) |
| NF E26-012-1981 | 鏈焊接長環校準和未校準負載鏈 | (WELDED LONG-LINK CALIBRATED OR NON-CALIBRATED LOADING CHAINS.) |
| NF E26-020-1975 | 未校準未試驗過的焊接圓鋼環鏈 | (Welded link chain round steel non calibrated non tested.) |
| NF E27-801-1970 | 焊接桿 | (WELD ROD WITH SCREWED END.) |
| NF E29-032-1985 | 工業管道.鋼制構件.對焊接頭.準備 | (Industrial pipework. Steel components. Butt welding ends. Preparation.) |
| NF E29-251-1972 | 工業管道.不銹鋼制焊接沖壓凸緣（薄型系列）.公稱壓力１０ | (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10) |
| NF E29-305-1999 | 工業閥門.鋼閥門對縫焊接末端.(歐洲標準EN 12627) | (INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL VALVES. (EUROPEAN STANDARD EN 12627).) |
| NF E29-591-1-1998 | 銅和銅合金.管道配件.第1部分:銅管毛細管終端焊接配件 | (Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.) |
| NF E29-600-1987 | 工業管道.鋼制連接管和螺塞.插接式焊接連接管.螺紋連接管和螺塞 | (Industrial pipework. Steel fittings and plugs. Socket welding fittings.) |
| NF E29-736-1-2003 | 可運輸?shù)臍馄?可再充氣的焊接鋼氣瓶.設計和制造.第1部分:碳鋼 | (Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1 : carbon steel.) |
| NF E29-736-2-2003 | 可運輸?shù)臍馄?可再充氣的焊接鋼氣瓶.設計和制造.第2部分:不銹鋼 | (Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2 : stainless steel.) |
| NF E29-745-2000 | 便攜式氣瓶.可再充氣的便攜式焊接鋁合金氣瓶的設計和結構規范 | (Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.) |
| NF E48-064-4-2000 | 液壓動力和一般應用的金屬管連接.第4部分:由O型環焊接的24芯連接 | (Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.) |
| NF E84-007-1998 | 柵欄用鋼線和線制品.第4部分:鋼線焊接網眼柵欄 | (Steel wire and wire products for fences. Part 4 : steel wire welded mesh fencing.) |
| NF E84-010-2003 | 圍欄用鋼絲和鋼絲制品.第7部分:圍欄用鋼絲焊接成的柵欄 | (Steel wire and wire products for fences - Part 7 : steel wire welded panels for fencing.) |
| NF E86-050-1983 | 工業設備部件.機械焊接組件.通用公差 | (INDUSTRIAL INSTALLATIONS. MECHANICALLY WELDED UNITS. GENERAL TOLERANCES.) |
| NF E86-253-1975 | 直徑２０m以下立式圓筒形焊接貯槽.制造技術條件 | (CYLINDRICAL WELDED STORAGE TANKS WITH VERTICAL AXIS UP TO 20 M IN DIAMETER TECHNICAL CONDITIONS OF CONSTRUCTION.) |
| NF E86-256-1979 | 工業設備.焊接貯槽.一般特性 | (INDUSTRIAL PLANTS. WELDED TANKS. GENERAL REQUIREMENTS.) |
| NF E86-330-1978 | 臥式鍋爐設備.焊接支架 | (HORIZONTAL CYLINDRICAL TANKS. WELDING SUPPORTS.) |
| NF F01-810-1990 | 鐵路車輛.非合金鋼或低合金鋼電弧焊和電阻焊接頭.設計與施工規則 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-812-1-1990 | 鐵路車輛.鋼的電弧和電阻焊接接頭.第1部分:對接焊和角接接頭中缺陷驗收準則 | (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.) |
| NF F01-812-2-1992 | 鐵路滾動器材.鋼的弧焊和電阻焊接.第2部分:電阻焊接缺陷的驗收標準 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF STEELS. PART 2 : ACCEPTANCE CRITERIA FOR DEFECTS IN ELECTRIC RESISTANCE WELDED JOINTS.) |
| NF F01-820-1992 | 鐵路車輛.車身用鋁合金焊接接頭(焊縫) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F18-001-1988 | 鐵路車輛.錳鋼磨損板.特性.焊接規定 | (ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.) |
| NF F19-351-1996 | 鐵路車輛.連續涂覆焊接鋼 | (RAILWAY ROLLING STOCK. CONTINUOUSLY WELDABLE PRIMER COATED SHEET STEEL.) |
| NF F50-105-1992 | 鐵路固定設備.鋼軌鋁熱劑焊接.工作特性和驗收 | (RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. WELDS PERFORMED BY COMPAGNIES. PERFORMANCE AND ACCEPTANCE CONDITONS OF WORKS.) |
| NF F50-106-1991 | 鐵路固定設備.鋼軌的熱焊接.過程驗收 | (RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. APPROVAL OF A PROCESS.) |
| NF F82-001-1990 | 鐵路車輛.車體框架用的可焊接鋁合金線材 | (RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.) |
| NF J22-860-1993 | 造船工業.帶鋼管法蘭的焊接艙壁件.PN6.PN10.PN16.PN20 | (Shipbuilding. Welded bulkhead pieces with flanges for steel pipework. Pn 6, PN10, PN 16, PN 20.) |
| NF J31-434-1948 | 造船工業.平甲板艙蓋用螺旋松緊扣.帶壓緊墊片的焊接銷 | (SHIPBUILDING. LOCKING HANDLES FOR ROUND FLAT HATCH COVERS. WELDED BOLT WITH PACKING.) |
| NF L06-380-10-2003 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.第10部分:一般要求 | (Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 10 : general requirements.) |
| NF L06-380-20-2003 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.第20部分:均質鋁及鋁合金組件 | (Aerospace series - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 20 : homogeneous assemblies aluminium and aluminium al) |
| NF L06-380-21-2003 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.第21部分:均質非合金及低合金鋼組 | (Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.) |
| NF L06-383-1987 | 航空和航天制造用焊作和釬焊件.點焊和滾輪焊的電阻焊接件.焊件質量 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.) |
| NF L06-384-1988 | 航天工業構件用焊接和釬焊組件.摩擦焊接組件.焊接組件的質量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-385-1987 | 航空和航天制造用焊件和釬焊件.點焊和滾輪焊接機器.規范和分類的 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welding machines. Qualification specifications.) |
| NF L06-386-1988 | 航天工業用焊接和釬焊組件.摩擦焊接機.合格規范 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.) |
| NF L06-387-1991 | 航天結構用焊接和釬焊組裝件.用電子束焊接金屬材料組裝件 | (Weldments and brazements for aerospace structures. Joints of metallic materials by electron beam welding. Quality of weldments.) |
| NF L06-388-1991 | 航天結構用焊接和釬焊組裝件.電子束焊接機.鑒定規程 | (Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Qualification specifications.) |
| NF L06-391-1994 | 航天結構用焊接和釬焊組裝件.用擴散焊接法安裝金屬材料組裝件.焊接組裝件的質量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-393-1995 | 航空和航天工業.航天結構用焊接和釬焊組裝件.根據T.I.G進行加工處理的焊接機械.合格規范 | (AIRCRAFT INDUSTRIE. WELDED AND SOLDERED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. WELDING MACHINE ACCORDING TO T.I.G. PROCESS. SPECIFICATION FOR QUALIFICATION.) |
| NF L06-394-1999 | 飛行器工業.航空與航天結構的焊接和釬焊. 用TIG方法的金屬材料焊接組件.焊接質量 | (AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.) |
| NF L07-158-1990 | 航天系列.焊接.圖紙上的數據 | (AEROSPACE SERIES. WELDS. INFORMATION ON DRAWINGS. (EUROPEAN STANDARD EN 2574).) |
| NF L12-811-2001 | 航空航天系列.鋼焊接用焊棒和焊絲.直徑0.5mm≥D≥5.0mm.尺寸 | (Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm inferior or equal D inferior or equal 5,0 mm - Dimensions.) |
| NF L12-812-2002 | 航空航天系列.耐熱合金焊接用填充桿材和填充金屬絲.直徑≥0.5mm 或者≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L13-200-2001 | 航空航天系列.耐熱合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding.) |
| NF L13-201-2001 | 航空航天系列.耐熱合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding.) |
| NF L13-203-2001 | 航空航天系列.耐熱合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding.) |
| NF L13-204-2001 | 航空航天系列.熱阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金屬焊料 | (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.) |
| NF L13-205-2001 | 航空航天系列.耐熱合金CO-WH4101(CoCr20W15Ni).焊接用填充金屬 | (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.) |
| NF L13-206-2001 | 航空航天系列.耐熱合金CO-WH1402(CoCr22Ni22W15).焊接用填充金屬 | (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.) |
| NF L13-207-2002 | 航空航天系列.鋼FE-WM3801(X5CrNiCu17-4).焊接用填充金屬 | (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding.) |
| NF L13-208-2002 | 航空航天系列.鋼FE-WM1502(X11CrNiMoVN12-3).焊接用填充金屬 | (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding.) |
| NF L13-209-2001 | 航空航天系列.鈦合金TI-W640001.焊接用填充金屬 | (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.) |
| NF L13-210-2002 | 航空航天系列.鈦合金TI-W19001.焊接用填充金屬 | (Aerospace series - Titanium alloy TI-W19001- Filler metal for welding.) |
| NF L13-211-2001 | 航空航天系列.耐熱合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding.) |
| NF L13-212-2001 | 航空航天系列.耐熱合金NI-WH3901(NiCr16Mo15).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.) |
| NF L13-213-2002 | 航空航天系列.鋼FE-WM1501 (X13CrNiMoCo12-3-2-2). 焊接用填充金屬 | (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding.) |
| NF L13-214-2002 | 航空航天系列.鋼FE-WA4801(X6CrNiMnNb18-10).焊接用填充金屬 | (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding.) |
| NF L13-215-2002 | 航空航天系列.鋁合金AL-W42201.焊接用填充金屬.焊條 | (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod.) |
| NF L13-216-2001 | 航空航天系列.耐熱合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod.) |
| NF L13-217-2001 | 航空航天系列.耐熱合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod.) |
| NF L13-218-2001 | 航空航天系列.耐熱合金CO-WH1401(CoCr26Ni11W8).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod.) |
| NF L13-219-2002 | 航空航天系列.鋼FE-WM1601 (X18CrWNi13-3-2).焊接填充金屬.線材和棒材 | (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-220-2001 | 航空航天系列.耐熱合金NI-WH0001 (NiCr20).焊接用填充金屬.焊絲和焊棒 | (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod.) |
| NF L13-221-2002 | 航空航天系列.鋼FE-WA4802 (X8CrNiMn27-22-2).焊接填充金屬.線材和棒材 | (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod.) |
| NF L13-222-2002 | 航空航天系列.鋼FE-WL1804 (25CrMnMo4-2-2).焊接填充金屬.線材和棒材 | (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod.) |
| NF L13-223-2002 | 航空航天系列.鋼FE-WL1805 (8CrMnMo12-4-9).焊接填充金屬.線材和棒材 | (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod.) |
| NF L13-224-2002 | 航空航天系列.鋼 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金屬.線材和棒材 | (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-225-2002 | 航空航天系列.鋼FE-WL1806 (15CrMnMoV5-4-9-3). 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Acier FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod.) |
| NF L13-226-2002 | 航空航天系列.鋼FE-WA2602 (X4NiCrTiMoV26-15). 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod.) |
| NF L13-227-2002 | 航空航天系列.鋼FE-WA3801 (X4CrNiMn20-10-2). 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod.) |
| NF L13-228-2001 | 航空航天系列.耐熱合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod.) |
| NF L13-229-2001 | 航空航天系列.耐熱合金NI-WH3902 (NICR25Mo10C).焊接用填充金屬.焊絲和焊棒 | (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod.) |
| NF L13-230-2001 | 航空航天系列.耐熱合金CO-WH4001(CoCr29W9).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod.) |
| NF L13-231-2002 | 航空航天系列.鎂合金鋼MG-W68001. 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod.) |
| NF L13-232-2001 | 航空航天系列.鋁合金AL-W46431.焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.) |
| NF L13-233-2001 | 航空航天系列.鈦TI-W99001.焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod.) |
| NF L13-234-2002 | 航空航天系列.鋼FE-WM1001 (X13Cr12). 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod.) |
| NF L13-235-2001 | 航空航天系列.鋼FE-WM1002(X13Cr13).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod.) |
| NF L15-811-2002 | 航空航天系列.焊接鈦和鈦合金用填充桿和填充焊絲.直徑 D≥0.5mm 和D≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L43-353-2002 | 航空航天系列.管聯接器8°30'.金屬包頭焊接用動態梁密封端.幾何構型 | (Aerospace series - Pipe coupling 8 o30' - Dynamic beam seal end for ferrule, welded - Geometric configuration.) |
| NF L43-354-2002 | 航空航天系列.管聯接器8°30'.焊接的聯接器端部.幾何構型 | (Aerospace series - Pipe coupling - Coupling ends, welded - Geometric configuration.) |
| NF L43-361-2002 | 航空航天系列. 8°30'鈦合金管連接件.帶動態梁密封端的焊接卡套 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Ferrules, welded, with dynamic beam seal end.) |
| NF L43-372-2002 | 航空航天系列.8°30'鈦合金管聯接件.90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded end.) |
| NF L43-373-2002 | 航空航天系列.8°30'鈦合金管聯接件.帶推進線螺母的90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.) |
| NF L43-375-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔離直通90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead, welded end.) |
| NF L43-377-2002 | 航空航天系列. 8°30'鈦合金管聯接件.帶推進線螺母的45°焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.) |
| NF L43-385-2002 | 航空航天系列.8°30'鈦合金管聯接件.焊接卡套用螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.) |
| NF L43-388-2002 | 航空航天系列.8°30'鈦合金管聯接件.帶動態粱密封端的端部焊接減徑的卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.) |
| NF L43-391-2002 | 航空航天系列.8°30'鈦合金管聯接件. 長型隔壁直通接頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-393-2002 | 航空航天系列.鈦合金管聯接器8°30'.彎管90度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded ends.) |
| NF L43-394-2002 | 航空航天系列.鈦合金管聯接器8°30'.彎管45度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded ends.) |
| NF L43-398-2002 | 航空航天系列.8°30'鈦合金管聯接件.長焊接端的90°彎頭隔壁直通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, welded end long.) |
| NF L43-406-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用帶動態梁密封端的焊接金屬包頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.) |
| NF L43-407-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用長的焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端加螺紋的管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-613-2003 | 航空航天系列.耐熱鋼或耐熱鎳合金管連接件.焊接連接端.設計構型.英制 | (Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.) |
| NF L43-619-2003 | 航空航天系列.耐熱鋼制37度管接頭.焊接端直通接管頭.英制 | (Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-622-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.焊接的螺紋直活管節 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.) |
| NF L43-624-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.焊接箍 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.) |
| NF L43-627-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.焊接的90度彎頭 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-629-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的90度彎管接頭.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-631-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的箍.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-633-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的三通接頭.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-635-2003 | 航空航天系列.耐熱鋼制焊接管接頭.90度彎頭.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 | 航空航天系列.耐熱鋼制焊接管接頭.減速器.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 | 航空航天系列.耐熱鋼制焊接管接頭.三通管.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L46-342-2002 | 航空航天系列.焊接管用鈦合金三通墊環 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.) |
| NF L46-343-2002 | 航空航天系列.焊接管用鈦合金三通墊環.28 000 kPa大氣壓 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF L54-002-082-2002 | 航空航天系列.電氣和光學連接的元件.試驗方法.第514部分:自帶焊料和助熔劑(材料)接觸片的可焊接性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 514 : solderability of contacts with self-contained solder and flux.) |
| NF M50-022-2000 | 燃氣供應系統.焊接鋼管線.功能要求 | (Gas supply systems - Welding steel pipework - Functional requirements.) |
| NF M62-301-2-1997 | 密封罩用組件.第2部分:機械手和遙控操作抓手用手套,焊接袋,鞋罩 | (Components for containment enclosures. Part 2 : gloves, welded bags, gaiters for remote-handling tongs and for manipulators.) |
| NF M87-400-1984 | 石油工業.帶外部桿和螺栓蓋的鋼制閥門.法蘭或焊接端點ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０ | (Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.) |
| NF M88-703-1988 | 液態烴分配裝置.商品丁烷和丙烷焊接鋼瓶.構造.試驗.設備 | (Equipment for the distribution of liquefied hydrocarbons. Welded steel cylinders for commercial butane and propane. Construction. Tests. Fittings.) |
| NF M88-712-1998 | 液化天然氣(GPL)用可移動多次裝填的焊接鋼瓶.設計和結構 | (Transportable refillable welded steel cylinders for liquefied petroleum gas (GPL). Design and construction.) |
| NF M88-712/A1-2002 | 液化天然氣(GPL)用可移動多次裝填的焊接鋼瓶.設計和結構 | (Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Design and construction.) |
| NF M88-713-1996 | 液化石油氣(LPG)用適于再裝的可運輸焊接鋼瓶.裝填前、裝填中及裝填后的檢查程序 | (Transportable refillable welded steel cylinders for liquefied petroleum gas (lpg). Procedure for checking before, during and after filling.) |
| NF M88-714-1996 | 液化石油氣(LPG)用適于再裝的可運輸焊接鋼瓶.周期性再鑒定(歐洲標準EN 1440) | (TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG). PERIODIC REQUALIFICATION. (EUROPEAN STANDARD EN 1440).) |
| NF M88-716-2002 | 液化石油氣(LPG)用焊接鋼罐.槽罐車.設計和生產 | (Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture.) |
| NF M88-717-2002 | 地面裝置用體積小于13 m3的液化石油氣(LPG)儲存用系列焊接鋼罐產品.設計和生產 | (Static welded steel cylindrical tanks, serially produced for the storage of Liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground - Design and manufact) |
| NF M88-728-2003 | 液化石油氣用(LPG)可運輸可再填充焊接鋁瓶.設計和結構 | (Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction.) |
| NF P12-603-2000 | 圬工輔助成份的試驗方法.第3部分:預制床連接處增強的焊接剪切負載容量的測定 | (Methods of test for ancillary components for masonry - Part 3 : determination of shear load capacity of welds in prefabricated bed joint reinforcement.) |
| NF P16-325-1-1999 | 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第1部分:要求,試驗和質量控制(EN1123-1) | (Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P16-325-2-1999 | 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第2部分:尺寸(EN1123-2) | (Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.) |
| NF P16-326-1-1999 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第1部分:要求、試驗和質量控制 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P16-326-2-1999 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統S.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.) |
| NF P16-326-3-1999 | 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統X.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.) |
| NF P19-108-1998 | 開式結構高壓蒸氧加氣混凝土或輕集料混凝土預制件用鋼筋網或組架焊接接縫剪切強度的測定 | (Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P22-250-1978 | 金屬結構件.圓形空心型材交叉切割焊接件.焊接件設計和鑒定 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS. DESIGN AND INSPECTION.) |
| NF P22-251-1978 | 金屬結構件.圓形空心型材交叉切割焊接件.構造規定 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.CONSTRUCTION.) |
| NF P22-252-1978 | 金屬結構件.圓形空心型材焊接件 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.) |
| NF P22-255-1979 | 金屬結構件.圓形或矩形空心型材I或H型焊接件.設計和檢驗 | (METAL CONSTRUCTION. HOLLOW SECTION WELDED ASSEMBLIES ON TYPE I AND H SECTIONS. DESIGN AND VERIFICATION.) |
| NF P22-258-1982 | 金屬結構件.靜態負荷下空心型材和矩形空心型材焊接件.設計和檢驗 | (WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING. DESIGN AND VERIFICATION.) |
| NF P22-470-1989 | 金屬結構.靜負荷焊接連接.結構規定和焊接檢驗 | (STEEL CONSTRUCITON. WELDED CONNECTIONS. DETAILS AND DESIGN OF WELDS.) |
| NF P22-471-1984 | 金屬結構.焊接連接.制造 | (Metallic construction. Welded joints. Fabrication.) |
| NF P22-473-1986 | 金屬結構.焊接連接.無損檢驗范圍 | (METAL CONSTRUCTION. WELDED ASSEMBLIES. RANGES OF NON DESTRUCTIVES CONTROL.) |
| NF P24-505-2000 | 門窗制造用未增塑聚氯乙烯型材.焊接彎頭和T接頭強度的測定 | (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
| NF P36-403-1989 | 排雨水用軋制焊接鋅管 | (RAINWATER GOODS. METALLIC PIPES,ALBOWS AND HEADS. SPECIFICATIONS.) |
| NF P37-408-1947 | 屋頂附件.巴黎框“式焊接或鉚接板制屋頂排水框架.術語.尺寸 | (ROOF SKYLIGHT RACK-MOUNTED WITH DRIP MOULDING KNOWN IN FRANCE AS “PARISIAN-TYPE“ OF WELDED OR RIVETED STEEL. TERMINOLY. DIMENSIONS.) |
| NF P94-115-1990 | 地質工程學.土地.勘測和試驗.B型動力鉆入的焊接 | (SOILS INVESTIGATION AND TESTING. IN SITU TESTS. DYNAMIC PENETRATION B TIP.) |
| NF S75-509-2002 | 焊接人員用防護手套 | (Protective gloves for welders.) |
| NF S77-104-2003 | 人眼防護.焊接及有關技術用濾光鏡.透射要求和推薦使用方法 | (Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use.) |
| NF S77-113-2004 | 人員的眼睛保護.自動焊接濾光鏡 | (Personal eye-protection - Automatic welding filters.) |
| NF T47-220-2003 | 氣焊機.焊接、切割和相關工藝用橡膠軟管 | (Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF T47-221-1996 | 氣焊設備.焊接和相關工藝用熱塑管 | (Gas welding equipment. Thermoplastic hoses for welding and allied processes.) |
| NF T54-119-1976 | 塑料.增塑聚氯乙烯塑料薄膜.高頻焊接試驗常規方法 | (PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.) |
| NF T54-120-1976 | 塑料.薄膜.熱焊接試驗常規方法（熱棒法） | (PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.)) |
| NF T54-412-2000 | 焊接熱塑結構的特性值.熱塑性設備設計用允許應力和模數的測定 | (Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment.) |
| NF T58-202-1-2000 | 焊接固定常壓熱塑性槽罐.第1部分:總則 | (Welded static non-pressurised thermoplastic tanks - Part 1 : general principles.) |
| NF T58-202-2-2000 | 焊接固定常壓熱塑性槽罐.第2部分:立式圓柱形槽罐的計算 | (Welded static non-pressurised thermoplastic tanks - Part 2 : calculation of vertical cylindrical tanks.) |
| NF T58-202-3-2000 | 焊接固定常壓熱塑性槽罐.第3部分:單層壁的長方形槽罐的設計和計算 | (Welded static non-pressurised thermoplastic tanks - Part 3 : design and calculation for single skin rectangular tanks.) |
| NF T58-202-4-2000 | 焊接固定常壓熱塑性槽罐.第4部分:法蘭連接的設計和計算 | (Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.) |
| 編號 | 中文名稱 | 英文名稱 |